| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire fix from Takashi Sakamoto:
"A single commit to resolve a regression existing in v6.11 or later.
The change in 1394 OHCI driver in v6.11 kernel could cause general
protection faults when rediscovering nodes in IEEE 1394 bus while
holding a spin lock. Consequently, watchdog checks can report a hard
lockup.
Currently, this issue is observed primarily during the system resume
phase when using an extra node with three ports or more is used.
However, it could potentially occur in the other cases as well"
* tag 'firewire-fixes-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: core: fix invalid port index for parent device
|
|
Pull block fixes from Jens Axboe:
- Pull request for MD via Song fixing a few issues
- Fix a wrong check in blk_rq_map_user_bvec(), causing IO errors on
passthrough IO (Xinyu)
* tag 'block-6.12-20241026' of git://git.kernel.dk/linux:
block: fix sanity checks in blk_rq_map_user_bvec
md/raid10: fix null ptr dereference in raid10_size()
md: ensure child flush IO does not affect origin bio->bi_status
|
|
Pull xfs fixes from Carlos Maiolino:
- Fix recovery of allocator ops after a growfs
- Do not fail repairs on metadata files with no attr fork
* tag 'xfs-6.12-fixes-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: update the pag for the last AG at recovery time
xfs: don't use __GFP_RETRY_MAYFAIL in xfs_initialize_perag
xfs: error out when a superblock buffer update reduces the agcount
xfs: update the file system geometry after recoverying superblock buffers
xfs: merge the perag freeing helpers
xfs: pass the exact range to initialize to xfs_initialize_perag
xfs: don't fail repairs on metadata files with no attr fork
|
|
Zenghui points out that a recent change to the way set_affinity is
handled for VPEs has the potential to return an error if the VPE
hasn't been mapped yet (because the guest hasn't emited a MAPTI
command yet), affecting GICv4.0 implementations that rely on the
ITSList feature.
Fix this by making the set_affinity succeed in this case, and
return early, without trying to touch the HW.
Fixes: 1442ee0011983 ("irqchip/gic-v4: Don't allow a VMOVP on a dying VPE")
Reported-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/all/20241027102220.1858558-1-maz@kernel.org
Link: https://lore.kernel.org/r/aab45cd3-e5ca-58cf-e081-e32a17f5b4e7@huawei.com
|
|
Remove hard-coded strings by using the str_enabled_disabled() helper
function.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241026154029.158977-2-thorsten.blum@linux.dev
|
|
The error path in msi_domain_alloc(), frees the already allocated MSI
interrupts in a loop, but the loop condition terminates when the index
reaches zero, which fails to free the first allocated MSI interrupt at
index zero.
Check for >= 0 so that msi[0] is freed as well.
Fixes: f3cf8bb0d6c3 ("genirq: Add generic msi irq domain support")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241026063639.10711-1-ruanjinjie@huawei.com
|
|
When cloning a new thread, its posix_cputimers are not inherited, and
are cleared by posix_cputimers_init(). However, this does not clear the
tick dependency it creates in tsk->tick_dep_mask, and the handler does
not reach the code to clear the dependency if there were no timers to
begin with.
Thus if a thread has a cputimer running before clone/fork, all
descendants will prevent nohz_full unless they create a cputimer of
their own.
Fix this by entirely clearing the tick_dep_mask in copy_process().
(There is currently no inherited state that needs a tick dependency)
Process-wide timers do not have this problem because fork does not copy
signal_struct as a baseline, it creates one from scratch.
Fixes: b78783000d5c ("posix-cpu-timers: Migrate to use new tick dependency mask model")
Signed-off-by: Ben Segall <bsegall@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/xm26o737bq8o.fsf@google.com
|
|
In a commit 24b7f8e5cd65 ("firewire: core: use helper functions for self
ID sequence"), the enumeration over self ID sequence was refactored with
some helper functions with KUnit tests. These helper functions are
guaranteed to work expectedly by the KUnit tests, however their application
includes a mistake to assign invalid value to the index of port connected
to parent device.
This bug affects the case that any extra node devices which has three or
more ports are connected to 1394 OHCI controller. In the case, the path
to update the tree cache could hits WARN_ON(), and gets general protection
fault due to the access to invalid address computed by the invalid value.
This commit fixes the bug to assign correct port index.
Cc: stable@vger.kernel.org
Reported-by: Edmund Raile <edmund.raile@proton.me>
Closes: https://lore.kernel.org/lkml/8a9902a4ece9329af1e1e42f5fea76861f0bf0e8.camel@proton.me/
Fixes: 24b7f8e5cd65 ("firewire: core: use helper functions for self ID sequence")
Link: https://lore.kernel.org/r/20241025034137.99317-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
|
|
Remove hard-coded strings by using the str_yes_no() helper function.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20241026110808.78074-1-thorsten.blum@linux.dev
|
|
Recently we got several deadlock report[1][2][3] caused by
blk_mq_freeze_queue and blk_enter_queue().
Turns out the two are just like acquiring read/write lock, so model them
as read/write lock for supporting lockdep:
1) model q->q_usage_counter as two locks(io and queue lock)
- queue lock covers sync with blk_enter_queue()
- io lock covers sync with bio_enter_queue()
2) make the lockdep class/key as per-queue:
- different subsystem has very different lock use pattern, shared lock
class causes false positive easily
- freeze_queue degrades to no lock in case that disk state becomes DEAD
because bio_enter_queue() won't be blocked any more
- freeze_queue degrades to no lock in case that request queue becomes dying
because blk_enter_queue() won't be blocked any more
3) model blk_mq_freeze_queue() as acquire_exclusive & try_lock
- it is exclusive lock, so dependency with blk_enter_queue() is covered
- it is trylock because blk_mq_freeze_queue() are allowed to run
concurrently
4) model blk_enter_queue() & bio_enter_queue() as acquire_read()
- nested blk_enter_queue() are allowed
- dependency with blk_mq_freeze_queue() is covered
- blk_queue_exit() is often called from other contexts(such as irq), and
it can't be annotated as lock_release(), so simply do it in
blk_enter_queue(), this way still covered cases as many as possible
With lockdep support, such kind of reports may be reported asap and
needn't wait until the real deadlock is triggered.
For example, lockdep report can be triggered in the report[3] with this
patch applied.
[1] occasional block layer hang when setting 'echo noop > /sys/block/sda/queue/scheduler'
https://bugzilla.kernel.org/show_bug.cgi?id=219166
[2] del_gendisk() vs blk_queue_enter() race condition
https://lore.kernel.org/linux-block/20241003085610.GK11458@google.com/
[3] queue_freeze & queue_enter deadlock in scsi
https://lore.kernel.org/linux-block/ZxG38G9BuFdBpBHZ@fedora/T/#u
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20241025003722.3630252-4-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
nvme_start_freeze() and nvme_unfreeze() may be called from same context,
so switch them to call non_owner variant of start_freeze/unfreeze queue.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20241025003722.3630252-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add non_owner variant of start_freeze/unfreeze queue APIs, so that the
caller knows that what they are doing, and we can skip lockdep support
for non_owner variant in per-call level.
Prepare for supporting lockdep for freezing/unfreezing queue.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20241025003722.3630252-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When support for vivobook fan profiles was added, the initial
call to throttle_thermal_policy_set_default() was removed, which
however is necessary for full initialization.
Fix this by calling throttle_thermal_policy_set_default() again
when setting up the platform profile.
Fixes: bcbfcebda2cb ("platform/x86: asus-wmi: add support for vivobook fan profiles")
Reported-by: Michael Larabel <Michael@phoronix.com>
Closes: https://www.phoronix.com/review/lunar-lake-xe2/5
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20241025191514.15032-2-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
What psi needs to do on each enqueue and dequeue has gotten more
subtle, and the generic sched code trying to distill this into a bool
for the callbacks is awkward.
Pass the flags directly and let psi parse them. For that to work, the
#include "stats.h" (which has the psi callback implementations) needs
to be below the flag definitions in "sched.h". Move that section
further down, next to some of the other accounting stuff.
This also puts the ENQUEUE_SAVE/RESTORE branch behind the psi jump
label, slightly reducing overhead when PSI=y but runtime disabled.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20241014144358.GB1021@cmpxchg.org
|
|
When running stress-ng-vm-segv test, we found a null pointer dereference
error in task_numa_work(). Here is the backtrace:
[323676.066985] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020
......
[323676.067108] CPU: 35 PID: 2694524 Comm: stress-ng-vm-se
......
[323676.067113] pstate: 23401009 (nzCv daif +PAN -UAO +TCO +DIT +SSBS BTYPE=--)
[323676.067115] pc : vma_migratable+0x1c/0xd0
[323676.067122] lr : task_numa_work+0x1ec/0x4e0
[323676.067127] sp : ffff8000ada73d20
[323676.067128] x29: ffff8000ada73d20 x28: 0000000000000000 x27: 000000003e89f010
[323676.067130] x26: 0000000000080000 x25: ffff800081b5c0d8 x24: ffff800081b27000
[323676.067133] x23: 0000000000010000 x22: 0000000104d18cc0 x21: ffff0009f7158000
[323676.067135] x20: 0000000000000000 x19: 0000000000000000 x18: ffff8000ada73db8
[323676.067138] x17: 0001400000000000 x16: ffff800080df40b0 x15: 0000000000000035
[323676.067140] x14: ffff8000ada73cc8 x13: 1fffe0017cc72001 x12: ffff8000ada73cc8
[323676.067142] x11: ffff80008001160c x10: ffff000be639000c x9 : ffff8000800f4ba4
[323676.067145] x8 : ffff000810375000 x7 : ffff8000ada73974 x6 : 0000000000000001
[323676.067147] x5 : 0068000b33e26707 x4 : 0000000000000001 x3 : ffff0009f7158000
[323676.067149] x2 : 0000000000000041 x1 : 0000000000004400 x0 : 0000000000000000
[323676.067152] Call trace:
[323676.067153] vma_migratable+0x1c/0xd0
[323676.067155] task_numa_work+0x1ec/0x4e0
[323676.067157] task_work_run+0x78/0xd8
[323676.067161] do_notify_resume+0x1ec/0x290
[323676.067163] el0_svc+0x150/0x160
[323676.067167] el0t_64_sync_handler+0xf8/0x128
[323676.067170] el0t_64_sync+0x17c/0x180
[323676.067173] Code: d2888001 910003fd f9000bf3 aa0003f3 (f9401000)
[323676.067177] SMP: stopping secondary CPUs
[323676.070184] Starting crashdump kernel...
stress-ng-vm-segv in stress-ng is used to stress test the SIGSEGV error
handling function of the system, which tries to cause a SIGSEGV error on
return from unmapping the whole address space of the child process.
Normally this program will not cause kernel crashes. But before the
munmap system call returns to user mode, a potential task_numa_work()
for numa balancing could be added and executed. In this scenario, since the
child process has no vma after munmap, the vma_next() in task_numa_work()
will return a null pointer even if the vma iterator restarts from 0.
Recheck the vma pointer before dereferencing it in task_numa_work().
Fixes: 214dbc428137 ("sched: convert to vma iterator")
Signed-off-by: Shawn Wang <shawnwang@linux.alibaba.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org # v6.2+
Link: https://lkml.kernel.org/r/20241025022208.125527-1-shawnwang@linux.alibaba.com
|
|
uclamp_mutex is only used for CONFIG_SYSCTL or
CONFIG_UCLAMP_TASK_GROUP so declare it __maybe_unused.
Closes: https://lore.kernel.org/oe-kbuild-all/202410060258.bPl2ZoUo-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202410250459.EJe6PJI5-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christian Loehle <christian.loehle@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/a1e9c342-01c9-44f0-a789-2c908e57942b@arm.com
|
|
Commit a2471684dae2 ("crypto: ecdsa - Move X9.62 signature size
calculation into template") introduced ->max_size() and ->digest_size()
callbacks to struct sig_alg. They return an algorithm's maximum
signature size and digest size, respectively.
For algorithms which lack these callbacks, crypto_register_sig() was
amended to use the ->key_size() callback instead.
However the commit neglected to also amend sig_register_instance().
As a result, the ->max_size() and ->digest_size() callbacks remain NULL
pointers if instances do not define them. A KEYCTL_PKEY_QUERY system
call results in an oops for such instances:
BUG: kernel NULL pointer dereference, address: 0000000000000000
Call Trace:
software_key_query+0x169/0x370
query_asymmetric_key+0x67/0x90
keyctl_pkey_query+0x86/0x120
__do_sys_keyctl+0x428/0x480
do_syscall_64+0x4b/0x110
The only instances affected by this are "pkcs1(rsa, ...)".
Fix by moving the callback checks from crypto_register_sig() to
sig_prepare_alg(), which is also invoked by sig_register_instance().
Change the return type of sig_prepare_alg() from void to int to be able
to return errors. This matches other algorithm types, see e.g.
aead_prepare_alg() or ahash_prepare_alg().
Fixes: a2471684dae2 ("crypto: ecdsa - Move X9.62 signature size calculation into template")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
crc32c-pcl-intel-asm_64.S has a loop with 1 to 127 iterations fully
unrolled and uses a jump table to jump into the correct location. This
optimization is misguided, as it bloats the binary code size and
introduces an indirect call. x86_64 CPUs can predict loops well, so it
is fine to just use a loop instead. Loop bookkeeping instructions can
compete with the crc instructions for the ALUs, but this is easily
mitigated by unrolling the loop by a smaller amount, such as 4 times.
Therefore, re-roll the loop and make related tweaks to the code.
This reduces the binary code size of crc_pclmul() from 4546 bytes to 418
bytes, a 91% reduction. In general it also makes the code faster, with
some large improvements seen when retpoline is enabled.
More detailed performance results are shown below. They are given as
percent improvement in throughput (negative means regressed) for CPU
microarchitecture vs. input length in bytes. E.g. an improvement from
40 GB/s to 50 GB/s would be listed as 25%.
Table 1: Results with retpoline enabled (the default):
| 512 | 833 | 1024 | 2000 | 3173 | 4096 |
---------------------+-------+-------+-------+------ +-------+-------+
Intel Haswell | 35.0% | 20.7% | 17.8% | 9.7% | -0.2% | 4.4% |
Intel Emerald Rapids | 66.8% | 45.2% | 36.3% | 19.3% | 0.0% | 5.4% |
AMD Zen 2 | 29.5% | 17.2% | 13.5% | 8.6% | -0.5% | 2.8% |
Table 2: Results with retpoline disabled:
| 512 | 833 | 1024 | 2000 | 3173 | 4096 |
---------------------+-------+-------+-------+------ +-------+-------+
Intel Haswell | 3.3% | 4.8% | 4.5% | 0.9% | -2.9% | 0.3% |
Intel Emerald Rapids | 7.5% | 6.4% | 5.2% | 2.3% | -0.0% | 0.6% |
AMD Zen 2 | 11.8% | 1.4% | 0.2% | 1.3% | -0.9% | -0.2% |
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Fix crc32c-pcl-intel-asm_64.S to access 32-bit arguments as 32-bit
values instead of 64-bit, since the upper bits of the corresponding
64-bit registers are not guaranteed to be zero. Also update the type of
the length argument to be unsigned int rather than int, as the assembly
code treats it as unsigned.
Note: there haven't been any reports of this bug actually causing
incorrect behavior. Neither gcc nor clang guarantee zero-extension to
64 bits, but zero-extension is likely to happen in practice because most
instructions that operate on 32-bit registers zero-extend to 64 bits.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The assembly code in crc32c-pcl-intel-asm_64.S is invoked only for
lengths >= 512, due to the overhead of saving and restoring FPU state.
Therefore, it is unnecessary for this code to be excessively "optimized"
for lengths < 200. Eliminate the excessive unrolling of this part of
the code and use a more straightforward qword-at-a-time loop.
Note: the part of the code in question is not entirely redundant, as it
is still used to process any remainder mod 24, as well as any remaining
data when fewer than 200 bytes remain after least one 3072-byte chunk.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Commit ca459e5f826f ("crypto: mips/crc32 - Clean up useless assignment
operations") changed crc32c_mips_le_hw() to use the instructions that
use the "regular" CRC32 polynomial instead of the Castagnoli polynomial.
Therefore it can't be computing CRC32C values correctly anymore.
I haven't been successful in running a MIPS kernel in QEMU, but based on
code review this is the fix that is needed.
Fixes: ca459e5f826f ("crypto: mips/crc32 - Clean up useless assignment operations")
Cc: Guan Wentao <guanwentao@uniontech.com>
Cc: WangYuli <wangyuli@uniontech.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Wentao Guan <guanwentao@uniontech.com>
Acked-by: WangYuli <wangyuli@uniontech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Commit dc748812fca0 ("Input: adp5588-keys - add support for pure gpio")
made having interrupt line optional for the device, however it neglected
to update suspend and resume handlers that try to disable interrupts
for the duration of suspend.
Fix this by checking if interrupt number assigned to the i2c device is
not 0 before trying to disable or reenable it.
Fixes: dc748812fca0 ("Input: adp5588-keys - add support for pure gpio")
Link: https://lore.kernel.org/r/Zv_2jEMYSWDw2gKs@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
ieee80211_chanctx
Move the `struct ieee80211_chanctx_conf conf` to the end of
`struct ieee80211_chanctx` and fix a memory corruption bug
triggered e.g. in `hwsim_set_chanctx_magic()`: `radar_detected`
is being overwritten when `cp->magic = HWSIM_CHANCTX_MAGIC;`
See the function call sequence below:
drv_add_chanctx(... struct ieee80211_chanctx *ctx) ->
local->ops->add_chanctx(&local->hw, &ctx->conf) ->
mac80211_hwsim_add_chanctx(... struct ieee80211_chanctx_conf *ctx) ->
hwsim_set_chanctx_magic(ctx)
This also happens in a number of other drivers.
Also, add a code comment to try to prevent people from introducing
new members after `struct ieee80211_chanctx_conf conf`. Notice that
`struct ieee80211_chanctx_conf` is a flexible structure --a structure
that contains a flexible-array member, so it should always be at
the end of any other containing structures.
This change also fixes 50 of the following warnings:
net/mac80211/ieee80211_i.h:895:39: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Fixes: bca8bc0399ac ("wifi: mac80211: handle ieee80211_radar_detected() for MLO")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://patch.msgid.link/ZxwWPrncTeSi1UTq@kspp
[also refer to other drivers in commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Pull more 9p reverts from Dominique Martinet:
"Revert patches causing inode collision problems.
The code simplification introduced significant regressions on servers
that do not remap inode numbers when exporting multiple underlying
filesystems with colliding inodes. See the top-most revert (commit
be2ca3825372) for details.
This problem had been ignored for too long and the reverts will also
head to stable (6.9+).
I'm confident this set of patches gets us back to previous behaviour
(another related patch had already been reverted back in April and
we're almost back to square 1, and the rest didn't touch inode
lifecycle)"
* tag '9p-for-6.12-rc5' of https://github.com/martinetd/linux:
Revert "fs/9p: simplify iget to remove unnecessary paths"
Revert "fs/9p: fix uaf in in v9fs_stat2inode_dotl"
Revert "fs/9p: remove redundant pointer v9ses"
Revert " fs/9p: mitigate inode collisions"
|
|
cc9877fb7677 ("sched_ext: Improve error reporting during loading") changed
how load failures are reported so that more error context can be
communicated. This breaks the enq_last_no_enq_fails test as attach no longer
fails. The scheduler is guaranteed to be ejected on attach completion with
full error information. Update enq_last_no_enq_fails so that it checks that
the scheduler is ejected using ops.exit().
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Vishal Chourasia <vishalc@linux.ibm.com>
Link: http://lkml.kernel.org/r/Zxknp7RAVNjmdJSc@linux.ibm.com
Fixes: cc9877fb7677 ("sched_ext: Improve error reporting during loading")
|
|
cast_mask() doesn't do any actual work and is defined in a header file.
Force it to be inline. When it is not inlined and the function is not used,
it can cause verificaiton failures like the following:
# tools/testing/selftests/sched_ext/runner -t minimal
===== START =====
TEST: minimal
DESCRIPTION: Verify we can load a fully minimal scheduler
OUTPUT:
libbpf: prog 'cast_mask': missing BPF prog type, check ELF section name '.text'
libbpf: prog 'cast_mask': failed to load: -22
libbpf: failed to load object 'minimal'
libbpf: failed to load BPF skeleton 'minimal': -22
ERR: minimal.c:20
Failed to open and load skel
not ok 1 minimal #
===== END =====
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: a748db0c8c6a ("tools/sched_ext: Receive misc updates from SCX repo")
|
|
scx_ops_bypass() can currently race on the ops enable / disable path as
follows:
1. scx_ops_bypass(true) called on enable path, bypass depth is set to 1
2. An op on the init path exits, which schedules scx_ops_disable_workfn()
3. scx_ops_bypass(false) is called on the disable path, and bypass depth
is decremented to 0
4. kthread is scheduled to execute scx_ops_disable_workfn()
5. scx_ops_bypass(true) called, bypass depth set to 1
6. scx_ops_bypass() races when iterating over CPUs
While it's not safe to take any blocking locks on the bypass path, it is
safe to take a raw spinlock which cannot be preempted. This patch therefore
updates scx_ops_bypass() to use a raw spinlock to synchronize, and changes
scx_ops_bypass_depth to be a regular int.
Without this change, we observe the following warnings when running the
'exit' sched_ext selftest (sometimes requires a couple of runs):
.[root@virtme-ng sched_ext]# ./runner -t exit
===== START =====
TEST: exit
...
[ 14.935078] WARNING: CPU: 2 PID: 360 at kernel/sched/ext.c:4332 scx_ops_bypass+0x1ca/0x280
[ 14.935126] Modules linked in:
[ 14.935150] CPU: 2 UID: 0 PID: 360 Comm: sched_ext_ops_h Not tainted 6.11.0-virtme #24
[ 14.935192] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014
[ 14.935242] Sched_ext: exit (enabling+all)
[ 14.935244] RIP: 0010:scx_ops_bypass+0x1ca/0x280
[ 14.935300] Code: ff ff ff e8 48 96 10 00 fb e9 08 ff ff ff c6 05 7b 34 e8 01 01 90 48 c7 c7 89 86 88 87 e8 be 1d f8 ff 90 0f 0b 90 90 eb 95 90 <0f> 0b 90 41 8b 84 24 24 0a 00 00 eb 97 90 0f 0b 90 41 8b 84 24 24
[ 14.935394] RSP: 0018:ffffb706c0957ce0 EFLAGS: 00010002
[ 14.935424] RAX: 0000000000000009 RBX: 0000000000000001 RCX: 00000000e3fb8b2a
[ 14.935465] RDX: 0000000000000001 RSI: 0000000000000004 RDI: ffffffff88a4c080
[ 14.935512] RBP: 0000000000009b56 R08: 0000000000000004 R09: 00000003f12e520a
[ 14.935555] R10: ffffffff863a9795 R11: 0000000000000000 R12: ffff8fc5fec31300
[ 14.935598] R13: ffff8fc5fec31318 R14: 0000000000000286 R15: 0000000000000018
[ 14.935642] FS: 0000000000000000(0000) GS:ffff8fc5fe680000(0000) knlGS:0000000000000000
[ 14.935684] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 14.935721] CR2: 0000557d92890b88 CR3: 000000002464a000 CR4: 0000000000750ef0
[ 14.935765] PKRU: 55555554
[ 14.935782] Call Trace:
[ 14.935802] <TASK>
[ 14.935823] ? __warn+0xce/0x220
[ 14.935850] ? scx_ops_bypass+0x1ca/0x280
[ 14.935881] ? report_bug+0xc1/0x160
[ 14.935909] ? handle_bug+0x61/0x90
[ 14.935934] ? exc_invalid_op+0x1a/0x50
[ 14.935959] ? asm_exc_invalid_op+0x1a/0x20
[ 14.935984] ? raw_spin_rq_lock_nested+0x15/0x30
[ 14.936019] ? scx_ops_bypass+0x1ca/0x280
[ 14.936046] ? srso_alias_return_thunk+0x5/0xfbef5
[ 14.936081] ? __pfx_scx_ops_disable_workfn+0x10/0x10
[ 14.936111] scx_ops_disable_workfn+0x146/0xac0
[ 14.936142] ? finish_task_switch+0xa9/0x2c0
[ 14.936172] ? srso_alias_return_thunk+0x5/0xfbef5
[ 14.936211] ? __pfx_scx_ops_disable_workfn+0x10/0x10
[ 14.936244] kthread_worker_fn+0x101/0x2c0
[ 14.936268] ? __pfx_kthread_worker_fn+0x10/0x10
[ 14.936299] kthread+0xec/0x110
[ 14.936327] ? __pfx_kthread+0x10/0x10
[ 14.936351] ret_from_fork+0x37/0x50
[ 14.936374] ? __pfx_kthread+0x10/0x10
[ 14.936400] ret_from_fork_asm+0x1a/0x30
[ 14.936427] </TASK>
[ 14.936443] irq event stamp: 21002
[ 14.936467] hardirqs last enabled at (21001): [<ffffffff863aa35f>] resched_cpu+0x9f/0xd0
[ 14.936521] hardirqs last disabled at (21002): [<ffffffff863dd0ba>] scx_ops_bypass+0x11a/0x280
[ 14.936571] softirqs last enabled at (20642): [<ffffffff863683d7>] __irq_exit_rcu+0x67/0xd0
[ 14.936622] softirqs last disabled at (20637): [<ffffffff863683d7>] __irq_exit_rcu+0x67/0xd0
[ 14.936672] ---[ end trace 0000000000000000 ]---
[ 14.953282] sched_ext: BPF scheduler "exit" disabled (unregistered from BPF)
[ 14.953352] ------------[ cut here ]------------
[ 14.953383] WARNING: CPU: 2 PID: 360 at kernel/sched/ext.c:4335 scx_ops_bypass+0x1d8/0x280
[ 14.953428] Modules linked in:
[ 14.953453] CPU: 2 UID: 0 PID: 360 Comm: sched_ext_ops_h Tainted: G W 6.11.0-virtme #24
[ 14.953505] Tainted: [W]=WARN
[ 14.953527] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014
[ 14.953574] RIP: 0010:scx_ops_bypass+0x1d8/0x280
[ 14.953603] Code: c6 05 7b 34 e8 01 01 90 48 c7 c7 89 86 88 87 e8 be 1d f8 ff 90 0f 0b 90 90 eb 95 90 0f 0b 90 41 8b 84 24 24 0a 00 00 eb 97 90 <0f> 0b 90 41 8b 84 24 24 0a 00 00 eb 92 f3 0f 1e fa 49 8d 84 24 f0
[ 14.953693] RSP: 0018:ffffb706c0957ce0 EFLAGS: 00010046
[ 14.953722] RAX: 0000000000000001 RBX: 0000000000000000 RCX: 0000000000000001
[ 14.953763] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8fc5fec31318
[ 14.953804] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000
[ 14.953845] R10: ffffffff863a9795 R11: 0000000000000000 R12: ffff8fc5fec31300
[ 14.953888] R13: ffff8fc5fec31318 R14: 0000000000000286 R15: 0000000000000018
[ 14.953934] FS: 0000000000000000(0000) GS:ffff8fc5fe680000(0000) knlGS:0000000000000000
[ 14.953974] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 14.954009] CR2: 0000557d92890b88 CR3: 000000002464a000 CR4: 0000000000750ef0
[ 14.954052] PKRU: 55555554
[ 14.954068] Call Trace:
[ 14.954085] <TASK>
[ 14.954102] ? __warn+0xce/0x220
[ 14.954126] ? scx_ops_bypass+0x1d8/0x280
[ 14.954150] ? report_bug+0xc1/0x160
[ 14.954178] ? handle_bug+0x61/0x90
[ 14.954203] ? exc_invalid_op+0x1a/0x50
[ 14.954226] ? asm_exc_invalid_op+0x1a/0x20
[ 14.954250] ? raw_spin_rq_lock_nested+0x15/0x30
[ 14.954285] ? scx_ops_bypass+0x1d8/0x280
[ 14.954311] ? __mutex_unlock_slowpath+0x3a/0x260
[ 14.954343] scx_ops_disable_workfn+0xa3e/0xac0
[ 14.954381] ? __pfx_scx_ops_disable_workfn+0x10/0x10
[ 14.954413] kthread_worker_fn+0x101/0x2c0
[ 14.954442] ? __pfx_kthread_worker_fn+0x10/0x10
[ 14.954479] kthread+0xec/0x110
[ 14.954507] ? __pfx_kthread+0x10/0x10
[ 14.954530] ret_from_fork+0x37/0x50
[ 14.954553] ? __pfx_kthread+0x10/0x10
[ 14.954576] ret_from_fork_asm+0x1a/0x30
[ 14.954603] </TASK>
[ 14.954621] irq event stamp: 21002
[ 14.954644] hardirqs last enabled at (21001): [<ffffffff863aa35f>] resched_cpu+0x9f/0xd0
[ 14.954686] hardirqs last disabled at (21002): [<ffffffff863dd0ba>] scx_ops_bypass+0x11a/0x280
[ 14.954735] softirqs last enabled at (20642): [<ffffffff863683d7>] __irq_exit_rcu+0x67/0xd0
[ 14.954782] softirqs last disabled at (20637): [<ffffffff863683d7>] __irq_exit_rcu+0x67/0xd0
[ 14.954829] ---[ end trace 0000000000000000 ]---
[ 15.022283] sched_ext: BPF scheduler "exit" disabled (unregistered from BPF)
[ 15.092282] sched_ext: BPF scheduler "exit" disabled (unregistered from BPF)
[ 15.149282] sched_ext: BPF scheduler "exit" disabled (unregistered from BPF)
ok 1 exit #
===== END =====
And with it, the test passes without issue after 1000s of runs:
.[root@virtme-ng sched_ext]# ./runner -t exit
===== START =====
TEST: exit
DESCRIPTION: Verify we can cleanly exit a scheduler in multiple places
OUTPUT:
[ 7.412856] sched_ext: BPF scheduler "exit" enabled
[ 7.427924] sched_ext: BPF scheduler "exit" disabled (unregistered from BPF)
[ 7.466677] sched_ext: BPF scheduler "exit" enabled
[ 7.475923] sched_ext: BPF scheduler "exit" disabled (unregistered from BPF)
[ 7.512803] sched_ext: BPF scheduler "exit" enabled
[ 7.532924] sched_ext: BPF scheduler "exit" disabled (unregistered from BPF)
[ 7.586809] sched_ext: BPF scheduler "exit" enabled
[ 7.595926] sched_ext: BPF scheduler "exit" disabled (unregistered from BPF)
[ 7.661923] sched_ext: BPF scheduler "exit" disabled (unregistered from BPF)
[ 7.723923] sched_ext: BPF scheduler "exit" disabled (unregistered from BPF)
ok 1 exit #
===== END =====
=============================
RESULTS:
PASSED: 1
SKIPPED: 0
FAILED: 0
Fixes: f0e1a0643a59 ("sched_ext: Implement BPF extensible scheduler class")
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
The investigation of an initialization failure [1] highlighted that
cxl_test does not reflect the init-order of real world systems. The
expected order is root/bus first then async probing of the memory
devices.
Fix up cxl_test to reflect that order. While it did not reproduce the
initial bug report (since that is dependent on built-in vs modular
builds), it did reveal a separate latent bug in the subsystem's decoder
shutdown flow. Fix for that sent separately.
Link: http://lore.kernel.org/20241004212504.1246-1-gourry@gourry.net [1]
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Alison Schofield <alison.schofield@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://patch.msgid.link/172964784521.81806.15791069994065969243.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
|
|
With the recent change to allow out-of-order decoder de-commit it
highlights a need to strengthen the in-order decoder commit guarantees.
As it stands match_free_decoder() ensures that if 2 regions are racing
decoder allocations the one that wins the race will get the lower id
decoder, but that still leaves the race to *commit* the decoder.
Rather than have this complicated case of "reserved in-order, but may
still commit out-of-order", just arrange for the reservation order to
match the commit-order. In other words, prevent subsequent allocations
until the last reservation is committed.
This precludes overlapping region creation events and requires the
previous regionN to either move forward to the decoder commit stage or
drop its reservation before regionN+1 can move forward. That is,
provided that regionN and regionN+1 decode through the same switch port.
As a side effect this allows match_free_decoder() to drop its dependency
on needing write access to the device_find_child() @data parameter [1].
Reported-by: Zijun Hu <quic_zijuhu@quicinc.com>
Closes: http://lore.kernel.org/20240905-const_dfc_prepare-v4-0-4180e1d5a244@quicinc.com
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Alison Schofield <alison.schofield@intel.com>
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://patch.msgid.link/172964783668.81806.14962699553881333486.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
|
|
In support of investigating an initialization failure report [1],
cxl_test was updated to register mock memory-devices after the mock
root-port/bus device had been registered. That led to cxl_test crashing
with a use-after-free bug with the following signature:
cxl_port_attach_region: cxl region3: cxl_host_bridge.0:port3 decoder3.0 add: mem0:decoder7.0 @ 0 next: cxl_switch_uport.0 nr_eps: 1 nr_targets: 1
cxl_port_attach_region: cxl region3: cxl_host_bridge.0:port3 decoder3.0 add: mem4:decoder14.0 @ 1 next: cxl_switch_uport.0 nr_eps: 2 nr_targets: 1
cxl_port_setup_targets: cxl region3: cxl_switch_uport.0:port6 target[0] = cxl_switch_dport.0 for mem0:decoder7.0 @ 0
1) cxl_port_setup_targets: cxl region3: cxl_switch_uport.0:port6 target[1] = cxl_switch_dport.4 for mem4:decoder14.0 @ 1
[..]
cxld_unregister: cxl decoder14.0:
cxl_region_decode_reset: cxl_region region3:
mock_decoder_reset: cxl_port port3: decoder3.0 reset
2) mock_decoder_reset: cxl_port port3: decoder3.0: out of order reset, expected decoder3.1
cxl_endpoint_decoder_release: cxl decoder14.0:
[..]
cxld_unregister: cxl decoder7.0:
3) cxl_region_decode_reset: cxl_region region3:
Oops: general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6bc3: 0000 [#1] PREEMPT SMP PTI
[..]
RIP: 0010:to_cxl_port+0x8/0x60 [cxl_core]
[..]
Call Trace:
<TASK>
cxl_region_decode_reset+0x69/0x190 [cxl_core]
cxl_region_detach+0xe8/0x210 [cxl_core]
cxl_decoder_kill_region+0x27/0x40 [cxl_core]
cxld_unregister+0x5d/0x60 [cxl_core]
At 1) a region has been established with 2 endpoint decoders (7.0 and
14.0). Those endpoints share a common switch-decoder in the topology
(3.0). At teardown, 2), decoder14.0 is the first to be removed and hits
the "out of order reset case" in the switch decoder. The effect though
is that region3 cleanup is aborted leaving it in-tact and
referencing decoder14.0. At 3) the second attempt to teardown region3
trips over the stale decoder14.0 object which has long since been
deleted.
The fix here is to recognize that the CXL specification places no
mandate on in-order shutdown of switch-decoders, the driver enforces
in-order allocation, and hardware enforces in-order commit. So, rather
than fail and leave objects dangling, always remove them.
In support of making cxl_region_decode_reset() always succeed,
cxl_region_invalidate_memregion() failures are turned into warnings.
Crashing the kernel is ok there since system integrity is at risk if
caches cannot be managed around physical address mutation events like
CXL region destruction.
A new device_for_each_child_reverse_from() is added to cleanup
port->commit_end after all dependent decoders have been disabled. In
other words if decoders are allocated 0->1->2 and disabled 1->2->0 then
port->commit_end only decrements from 2 after 2 has been disabled, and
it decrements all the way to zero since 1 was disabled previously.
Link: http://lore.kernel.org/20241004212504.1246-1-gourry@gourry.net [1]
Cc: stable@vger.kernel.org
Fixes: 176baefb2eb5 ("cxl/hdm: Commit decoder state to hardware")
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Alison Schofield <alison.schofield@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Zijun Hu <quic_zijuhu@quicinc.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://patch.msgid.link/172964782781.81806.17902885593105284330.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
|
|
In order to ensure root CXL ports are enabled upon cxl_acpi_probe()
when the 'cxl_port' driver is built as a module, arrange for the
module to be pre-loaded or built-in.
The "Fixes:" but no "Cc: stable" on this patch reflects that the issue
is merely by inspection since the bug that triggered the discovery of
this potential problem [1] is fixed by other means. However, a stable
backport should do no harm.
Fixes: 8dd2bc0f8e02 ("cxl/mem: Add the cxl_mem driver")
Link: http://lore.kernel.org/20241004212504.1246-1-gourry@gourry.net [1]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Gregory Price <gourry@gourry.net>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://patch.msgid.link/172964781969.81806.17276352414854540808.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
|
|
It turns out since its original introduction, pre-2.6.12,
bus_rescan_devices() has skipped devices that might be in the process of
attaching or detaching from their driver. For CXL this behavior is
unwanted and expects that cxl_bus_rescan() is a probe barrier.
That behavior is simple enough to achieve with bus_for_each_dev() paired
with call to device_attach(), and it is unclear why bus_rescan_devices()
took the position of lockless consumption of dev->driver which is racy.
The "Fixes:" but no "Cc: stable" on this patch reflects that the issue
is merely by inspection since the bug that triggered the discovery of
this potential problem [1] is fixed by other means. However, a stable
backport should do no harm.
Fixes: 8dd2bc0f8e02 ("cxl/mem: Add the cxl_mem driver")
Link: http://lore.kernel.org/20241004212504.1246-1-gourry@gourry.net [1]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Gregory Price <gourry@gourry.net>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://patch.msgid.link/172964781104.81806.4277549800082443769.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
|
|
When the CXL subsystem is built-in the module init order is determined
by Makefile order. That order violates expectations. The expectation is
that cxl_acpi and cxl_mem can race to attach. If cxl_acpi wins the race,
cxl_mem will find the enabled CXL root ports it needs. If cxl_acpi loses
the race it will retrigger cxl_mem to attach via cxl_bus_rescan(). That
flow only works if cxl_acpi can assume ports are enabled immediately
upon cxl_acpi_probe() return. That in turn can only happen in the
CONFIG_CXL_ACPI=y case if the cxl_port driver is registered before
cxl_acpi_probe() runs.
Fix up the order to prevent initialization failures. Ensure that
cxl_port is built-in when cxl_acpi is also built-in, arrange for
Makefile order to resolve the subsys_initcall() order of cxl_port and
cxl_acpi, and arrange for Makefile order to resolve the
device_initcall() (module_init()) order of the remaining objects.
As for what contributed to this not being found earlier, the CXL
regression environment, cxl_test, builds all CXL functionality as a
module to allow to symbol mocking and other dynamic reload tests. As a
result there is no regression coverage for the built-in case.
Reported-by: Gregory Price <gourry@gourry.net>
Closes: http://lore.kernel.org/20241004212504.1246-1-gourry@gourry.net
Tested-by: Gregory Price <gourry@gourry.net>
Fixes: 8dd2bc0f8e02 ("cxl/mem: Add the cxl_mem driver")
Cc: stable@vger.kernel.org
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Alison Schofield <alison.schofield@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Tested-by: Alejandro Lucero <alucerop@amd.com>
Reviewed-by: Alejandro Lucero <alucerop@amd.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Link: https://patch.msgid.link/172988474904.476062.7961350937442459266.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
|
|
If ufshcd_rtc_work calls ufshcd_rpm_put_sync() and the pm's usage_count
is 0, we will enter the runtime suspend callback. However, the runtime
suspend callback will wait to flush ufshcd_rtc_work, causing a deadlock.
Replace ufshcd_rpm_put_sync() with ufshcd_rpm_put() to avoid the
deadlock.
Fixes: 6bf999e0eb41 ("scsi: ufs: core: Add UFS RTC support")
Cc: stable@vger.kernel.org #6.11.x
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://lore.kernel.org/r/20241024015453.21684-1-peter.wang@mediatek.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
AMD heterogeneous designs include two types of cores:
* Performance
* Efficiency
Each core type has different highest performance values configured by the
platform. Drivers such as amd_pstate need to identify the type of core to
correctly set an appropriate boost numerator to calculate the maximum
frequency.
X86_FEATURE_AMD_HETEROGENEOUS_CORES is used to identify whether the SoC
supports heterogeneous core type by reading CPUID leaf Fn_0x80000026.
On performance cores the scaling factor of 196 is used. On efficiency cores
the scaling factor is the value reported as the highest perf. Efficiency
cores have the same preferred core rankings.
Suggested-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20241025171459.1093-6-mario.limonciello@amd.com
|
|
If the sg_copy_buffer() call returns less than sdebug_sector_size, then
we drop out of the copy loop. However, we still report that we copied
the full expected amount, which is not proper.
Fix by keeping a running total and return that value.
Fixes: 84f3a3c01d70 ("scsi: scsi_debug: Atomic write support")
Reported-by: Colin Ian King <colin.i.king@gmail.com>
Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20241018101655.4207-1-john.g.garry@oracle.com
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull smb client fixes from Steve French:
- Fix init module error caseb
- Fix memory allocation error path (for passwords) in mount
* tag 'v6.12-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix warning when destroy 'cifs_io_request_pool'
smb: client: Handle kstrdup failures for passwords
|
|
Sometimes it is required to take actions based on if a CPU is a performance or
efficiency core. As an example, intel_pstate driver uses the Intel core-type
to determine CPU scaling. Also, some CPU vulnerabilities only affect
a specific CPU type, like RFDS only affects Intel Atom. Hybrid systems that
have variants P+E, P-only(Core) and E-only(Atom), it is not straightforward to
identify which variant is affected by a type specific vulnerability.
Such processors do have CPUID field that can uniquely identify them. Like,
P+E, P-only and E-only enumerates CPUID.1A.CORE_TYPE identification, while P+E
additionally enumerates CPUID.7.HYBRID. Based on this information, it is
possible for boot CPU to identify if a system has mixed CPU types.
Add a new field hw_cpu_type to struct cpuinfo_topology that stores the
hardware specific CPU type. This saves the overhead of IPIs to get the CPU
type of a different CPU. CPU type is populated early in the boot process,
before vulnerabilities are enumerated.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Co-developed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/r/20241025171459.1093-5-mario.limonciello@amd.com
|
|
Enable the SD_ASYM_PACKING domain flag for the PKG domain on AMD heterogeneous
processors. This flag is beneficial for processors with one or more CCDs and
relies on x86_sched_itmt_flags().
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Co-developed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Link: https://lore.kernel.org/r/20241025171459.1093-4-mario.limonciello@amd.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse fixes from Miklos Szeredi:
- Fix cached size after passthrough writes
This fix needed a trivial change in the backing-file API, which
resulted in some non-fuse files being touched.
- Revert a commit meant as a cleanup but which triggered a WARNING
- Remove a stray debug line left-over
* tag 'fuse-fixes-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: remove stray debug line
Revert "fuse: move initialization of fuse_file to fuse_writepages() instead of in callback"
fuse: update inode size after extending passthrough write
fs: pass offset and result to backing_file end_write() callback
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- Fix a couple of use-after-free bugs
* tag 'nfsd-6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
nfsd: cancel nfsd_shrinker_work using sync mode in nfs4_state_shutdown_net
nfsd: fix race between laundromat and free_stateid
|
|
CPUID leaf 0x80000026 advertises core types with different efficiency
rankings.
Bit 30 indicates the heterogeneous core topology feature, if the bit
set, it means not all instances at the current hierarchical level have
the same core topology.
This is described in the AMD64 Architecture Programmers Manual Volume
2 and 3, doc ID #25493 and #25494.
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Co-developed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20241025171459.1093-3-mario.limonciello@amd.com
|
|
This feature is an AMD unique feature of some processors, so put
AMD into the name.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20241025171459.1093-2-mario.limonciello@amd.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix an ACPI PRM (Platform Runtime Mechanism) issue and add two
new DMI quirks, one for an ACPI IRQ override and one for lid switch
detection:
- Make acpi_parse_prmt() look for EFI_MEMORY_RUNTIME memory regions
only to comply with the UEFI specification and make PRM use
efi_guid_t instead of guid_t to avoid a compiler warning triggered
by that change (Koba Ko, Dan Carpenter)
- Add an ACPI IRQ override quirk for LG 16T90SP (Christian Heusel)
- Add a lid switch detection quirk for Samsung Galaxy Book2 (Shubham
Panwar)"
* tag 'acpi-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: PRM: Clean up guid type in struct prm_handler_info
ACPI: button: Add DMI quirk for Samsung Galaxy Book2 to fix initial lid detection issue
ACPI: resource: Add LG 16T90SP to irq1_level_low_skip_override[]
ACPI: PRM: Find EFI_MEMORY_RUNTIME block for PRM handler and context
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"Update cpufreq documentation to match the code after recent changes
(Christian Loehle), fix a units conversion issue in the CPPC cpufreq
driver (liwei), and fix an error check in the dtpm_devfreq power
capping driver (Yuan Can)"
* tag 'pm-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: CPPC: fix perf_to_khz/khz_to_perf conversion exception
powercap: dtpm_devfreq: Fix error check against dev_pm_qos_add_request()
cpufreq: docs: Reflect latency changes in docs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fixes from Bjorn Helgaas:
- Hold the rescan lock while adding devices to avoid race with
concurrent pwrctl rescan that can lead to a crash (Bartosz
Golaszewski)
- Avoid binding pwrctl driver to QCom WCN wifi if the DT lacks the
necessary PMU regulator descriptions (Bartosz Golaszewski)
* tag 'pci-v6.12-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI/pwrctl: Abandon QCom WCN probe on pre-pwrseq device-trees
PCI: Hold rescan lock while adding devices during host probe
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev fixes from Helge Deller:
- Fix some build warnings and failures with CONFIG_FB_IOMEM_FOPS and
CONFIG_FB_DEVICE
- Remove the da8xx fbdev driver
- Constify struct sbus_mmap_map and fix indentation warning
* tag 'fbdev-for-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: wm8505fb: select CONFIG_FB_IOMEM_FOPS
fbdev: da8xx: remove the driver
fbdev: Constify struct sbus_mmap_map
fbdev: nvidiafb: fix inconsistent indentation warning
fbdev: sstfb: Make CONFIG_FB_DEVICE optional
|
|
The details about the handling of the "normal" values were moved
to the _msecs_to_jiffies() helpers in commit ca42aaf0c861 ("time:
Refactor msecs_to_jiffies"). However, the same commit still mentioned
__msecs_to_jiffies() in the added documentation.
Thus point to _msecs_to_jiffies() instead.
Fixes: ca42aaf0c861 ("time: Refactor msecs_to_jiffies")
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241025110141.157205-2-ojeda@kernel.org
|
|
The documentation's intention is to compare msecs_to_jiffies() (first
sentence) with __msecs_to_jiffies() (second sentence), which is what the
original documentation did. One of the cleanups in commit f3cb80804b82
("time: Fix various kernel-doc problems") may have thought the paragraph
was talking about the latter since that is what it is being documented.
Thus revert that part of the change.
Fixes: f3cb80804b82 ("time: Fix various kernel-doc problems")
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241025110141.157205-1-ojeda@kernel.org
|
|
timekeeping_update_staged() is the only call site of timekeeping_update().
Merge those functions. No functional change.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/all/20241009-devel-anna-maria-b4-timers-ptp-timekeeping-v2-25-554456a44a15@linutronix.de
|
