| Age | Commit message (Collapse) | Author |
|---|
|
All call sites of using TK_MIRROR flag in timekeeping_update() are
gone. The TK_MIRROR dependent code path is therefore dead code.
Remove it along with the TK_MIRROR define.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/all/20241009-devel-anna-maria-b4-timers-ptp-timekeeping-v2-24-554456a44a15@linutronix.de
|
|
Updates of the timekeeper can be done by operating on the shadow timekeeper
and afterwards copying the result into the real timekeeper. This has the
advantage, that the sequence count write protected region is kept as small
as possible.
Convert do_adjtimex() to use this scheme and take the opportunity to use a
scoped_guard() for locking.
That requires to have a separate function for updating the leap state so
that the update is protected by the sequence count. This also brings the
timekeeper and the shadow timekeeper in sync for this state, which was not
the case so far. That's not a correctness problem as the state is only used
at the read sides which use the real timekeeper, but it's inconsistent
nevertheless.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/all/20241009-devel-anna-maria-b4-timers-ptp-timekeeping-v2-23-554456a44a15@linutronix.de
|
|
Updates of the timekeeper can be done by operating on the shadow timekeeper
and afterwards copying the result into the real timekeeper. This has the
advantage, that the sequence count write protected region is kept as small
as possible.
While the sequence count held time is not relevant for the resume path as
there is no concurrency, there is no reason to have this function
different than all the other update sites.
Convert timekeeping_inject_offset() to use this scheme and cleanup the
variable declarations while at it.
As halt_fast_timekeeper() does not need protection sequence counter, it is
no problem to move it with this change outside of the sequence counter
protected area. But it still needs to be executed while holding the lock.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/all/20241009-devel-anna-maria-b4-timers-ptp-timekeeping-v2-22-554456a44a15@linutronix.de
|
|
Updates of the timekeeper can be done by operating on the shadow timekeeper
and afterwards copying the result into the real timekeeper. This has the
advantage, that the sequence count write protected region is kept as small
as possible.
While the sequence count held time is not relevant for the resume path as
there is no concurrency, there is no reason to have this function
different than all the other update sites.
Convert timekeeping_inject_offset() to use this scheme and cleanup the
variable declaration while at it.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/all/20241009-devel-anna-maria-b4-timers-ptp-timekeeping-v2-21-554456a44a15@linutronix.de
|
|
Updates of the timekeeper can be done by operating on the shadow timekeeper
and afterwards copying the result into the real timekeeper. This has the
advantage, that the sequence count write protected region is kept as small
as possible.
Convert timekeeping_inject_sleeptime64() to use this scheme.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/all/20241009-devel-anna-maria-b4-timers-ptp-timekeeping-v2-20-554456a44a15@linutronix.de
|
|
For timekeeping_init() the sequence count write held time is not relevant
and it could keep working on the real timekeeper, but there is no reason to
make it different from other timekeeper updates.
Convert it to operate on the shadow timekeeper.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/all/20241009-devel-anna-maria-b4-timers-ptp-timekeeping-v2-19-554456a44a15@linutronix.de
|
|
Updates of the timekeeper can be done by operating on the shadow timekeeper
and afterwards copying the result into the real timekeeper. This has the
advantage, that the sequence count write protected region is kept as small
as possible.
Convert change_clocksource() to use this scheme.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/all/20241009-devel-anna-maria-b4-timers-ptp-timekeeping-v2-18-554456a44a15@linutronix.de
|
|
Updates of the timekeeper can be done by operating on the shadow timekeeper
and afterwards copying the result into the real timekeeper. This has the
advantage, that the sequence count write protected region is kept as small
as possible.
Convert timekeeping_inject_offset() to use this scheme.
That allows to use a scoped_guard() for locking the timekeeper lock as the
usage of the shadow timekeeper allows a rollback in the error case instead
of the full timekeeper update of the original code.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/all/20241009-devel-anna-maria-b4-timers-ptp-timekeeping-v2-17-554456a44a15@linutronix.de
|
|
Updates of the timekeeper can be done by operating on the shadow timekeeper
and afterwards copying the result into the real timekeeper. This has the
advantage, that the sequence count write protected region is kept as small
as possible.
Convert do_settimeofday64() to use this scheme.
That allows to use a scoped_guard() for locking the timekeeper lock as the
usage of the shadow timekeeper allows a rollback in the error case instead
of the full timekeeper update of the original code.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/all/20241009-devel-anna-maria-b4-timers-ptp-timekeeping-v2-16-554456a44a15@linutronix.de
|
|
Functions which operate on the real timekeeper, e.g. do_settimeofday(),
have error conditions. If they are hit a full timekeeping update is still
required because the already committed operations modified the timekeeper.
When switching these functions to operate on the shadow timekeeper then the
full update can be avoided in the error case, but the modified shadow
timekeeper has to be restored.
Provide a helper function for that.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/all/20241009-devel-anna-maria-b4-timers-ptp-timekeeping-v2-15-554456a44a15@linutronix.de
|
|
Instead of explicitly listing all the separate timekeeping actions flags,
introduce a new one which covers all actions except TK_MIRROR action.
No functional change.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/all/20241009-devel-anna-maria-b4-timers-ptp-timekeeping-v2-14-554456a44a15@linutronix.de
|
|
timekeeping_advance() is the only optimized function which uses
shadow_timekeeper for updating the real timekeeper to keep the sequence
counter protected region as small as possible.
To be able to transform timekeeper updates in other functions to use the
same logic, split out functionality into a separate function
timekeeper_update_staged().
While at it, document the reason why the sequence counter must be write
held over the call to timekeeping_update() and the copying to the real
timekeeper and why using a pointer based update is suboptimal.
No functional change.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/all/20241009-devel-anna-maria-b4-timers-ptp-timekeeping-v2-13-554456a44a15@linutronix.de
|
|
Updates of the timekeeper are done in two ways:
1. Updating timekeeper and afterwards memcpy()'ing the result into
shadow_timekeeper using timekeeping_update(). Used everywhere for
updates except in timekeeping_advance(); the sequence counter protected
region starts before the first change to the timekeeper is done.
2. Updating shadow_timekeeper and then memcpy()'ing the result into
timekeeper. Used only by in timekeeping_advance(); The seqence counter
protected region is only around timekeeping_update() and the memcpy for
copy from shadow to timekeeper.
The second option is fast path optimized. The sequence counter protected
region is as short as possible.
As this behaviour is mainly documented by commit messages, but not in code,
it makes the not easy timekeeping code more complicated to read.
There is no reason why updates to the timekeeper can't use the optimized
version everywhere. With this, the code will be cleaner, as code is reused
instead of duplicated.
To be able to access tk_data which contains all required information, add a
pointer to tk_data as an argument to timekeeping_update(). With that
convert the comment about holding the lock into a lockdep assert.
No functional change.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/all/20241009-devel-anna-maria-b4-timers-ptp-timekeeping-v2-12-554456a44a15@linutronix.de
|
|
Initialization of lock and seqcount needs to be done for every instance of
timekeeper struct. To be able to easily reuse it, create a separate
function for it.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/all/20241009-devel-anna-maria-b4-timers-ptp-timekeeping-v2-11-554456a44a15@linutronix.de
|
|
The struct tk_core uses is not reusable. As long as there is only a single
timekeeper, this is not a problem. But when the timekeeper infrastructure
will be reused for per ptp clock timekeepers, an explicit struct type is
required.
Define struct tk_data as explicit struct type for tk_core.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/all/20241009-devel-anna-maria-b4-timers-ptp-timekeeping-v2-10-554456a44a15@linutronix.de
|
|
timekeeper_lock protects updates to struct tk_core but is not part of
struct tk_core. As long as there is only a single timekeeper, this is not a
problem. But when the timekeeper infrastructure will be reused for per ptp
clock timekeepers, timekeeper_lock needs to be part of tk_core.
Move the lock into tk_core, move initialisation of the lock and sequence
counter into timekeeping_init() and update all users of timekeeper_lock.
As this is touching all lock sites, convert them to use:
guard(raw_spinlock_irqsave)(&tk_core.lock);
instead of lock/unlock functions whenever possible.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/all/20241009-devel-anna-maria-b4-timers-ptp-timekeeping-v2-9-554456a44a15@linutronix.de
|
|
timekeeper_lock protects updates of timekeeper (tk_core). It is also used
by vdso_update_begin/end() and not only internally by the timekeeper code.
As long as there is only a single timekeeper, this works fine. But when
the timekeeper infrastructure will be reused for per ptp clock timekeepers,
timekeeper_lock needs to be part of tk_core..
Therefore encapuslate locking/unlocking of timekeeper_lock and make the
lock static.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/all/20241009-devel-anna-maria-b4-timers-ptp-timekeeping-v2-8-554456a44a15@linutronix.de
|
|
tk_core requires shadow_timekeeper to allow timekeeping_advance() updating
without holding the timekeeper sequence count write locked. This allows the
readers to make progress up to the actual update where the shadow
timekeeper is copied over to the real timekeeper.
As long as there is only a single timekeeper, having them separate is
fine. But when the timekeeper infrastructure will be reused for per ptp
clock timekeepers, shadow_timekeeper needs to be part of tk_core.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/all/20241009-devel-anna-maria-b4-timers-ptp-timekeeping-v2-7-554456a44a15@linutronix.de
|
|
struct timekeeper is ordered suboptimal vs. cachelines. The layout,
including the preceding seqcount (see struct tk_core in timekeeper.c) is:
cacheline 0: seqcount, tkr_mono
cacheline 1: tkr_raw, xtime_sec
cacheline 2: ktime_sec ... tai_offset, internal variables
cacheline 3: next_leap_ktime, raw_sec, internal variables
cacheline 4: internal variables
So any access to via ktime_get*() except for access to CLOCK_MONOTONIC_RAW
will use either cachelines 0 + 1 or cachelines 0 + 2. Access to
CLOCK_MONOTONIC_RAW uses cachelines 0 + 1 + 3.
Reorder the members so that the result is more efficient:
cacheline 0: seqcount, tkr_mono
cacheline 1: xtime_sec, ktime_sec ... tai_offset
cacheline 2: tkr_raw, raw_sec
cacheline 3: internal variables
cacheline 4: internal variables
That means ktime_get*() will access cacheline 0 + 1 and CLOCK_MONOTONIC_RAW
access will use cachelines 0 + 2.
Update kernel-doc and fix formatting issues while at it. Also fix a typo
in struct tk_read_base kernel-doc.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/all/20241015100839.12702-1-anna-maria@linutronix.de
|
|
timekeeping_advance() takes the timekeeper_lock and releases it before
returning. When an early return is required, goto statements are used to
make sure the lock is realeased properly. When the code was written the
locking guard() was not yet available.
Use the guard() to simplify the code and while at it cleanup ordering of
function variables. No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/all/20241009-devel-anna-maria-b4-timers-ptp-timekeeping-v2-5-554456a44a15@linutronix.de
|
|
There is no point to go through a full timekeeping update when acquiring a
module reference or enabling the new clocksource fails.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/all/20241009-devel-anna-maria-b4-timers-ptp-timekeeping-v2-4-554456a44a15@linutronix.de
|
|
do_adjtimex() invokes tk_update_leap_state() unconditionally even when a
previous invocation of timekeeping_update() already did that update.
Put it into the else path which is invoked when timekeeping_update() is not
called.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/all/20241009-devel-anna-maria-b4-timers-ptp-timekeeping-v2-3-554456a44a15@linutronix.de
|
|
hard_pps() update does not modify anything which might be required by time
readers so forcing readers out of the way during the update is a pointless
exercise.
The interaction with adjtimex() and timekeeper updates which call into the
NTP code is properly serialized by timekeeper_lock.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241009-devel-anna-maria-b4-timers-ptp-timekeeping-v2-2-554456a44a15@linutronix.de
|
|
No point in reading it a second time when the comparison fails.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/all/20241009-devel-anna-maria-b4-timers-ptp-timekeeping-v2-1-554456a44a15@linutronix.de
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fix from Bartosz Golaszewski:
"Update MAINTAINERS with a keyword pattern for legacy GPIO API
The goal is to alert us to anyone trying to use the deprecated, legacy
API (this happens almost every release)"
* tag 'gpio-fixes-for-v6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
MAINTAINERS: add a keyword entry for the GPIO subsystem
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fix from Niklas Cassel:
- Fix the handling of ATA commands that timeout (command that did not
receive a completion interrupt within the configured timeout time).
Commands that timeout, while also having either the FAILFAST flag
set, or the command being a passthrough command, should never be
retried. Restore this behavior (as it was before v6.12-rc1).
* tag 'ata-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: libata: Set DID_TIME_OUT for commands that actually timed out
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"The majority of changes here are about ASoC.
There are two core changes in ASoC (the bump of minimal topology ABI
version and the fix for references of components in DAPM code), and
others are mostly various device-specific fixes for SoundWire, AMD,
Intel, SOF, Qualcomm and FSL, in addition to a few usual HD-audio
quirks and fixes"
* tag 'sound-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (33 commits)
ALSA: hda/realtek: Update default depop procedure
ASoC: qcom: sc7280: Fix missing Soundwire runtime stream alloc
ASoC: fsl_micfil: Add sample rate constraint
ASoC: rt722-sdca: increase clk_stop_timeout to fix clock stop issue
ALSA: hda/tas2781: select CRC32 instead of CRC32_SARWATE
ALSA: hda/realtek: Add subwoofer quirk for Acer Predator G9-593
ALSA: firewire-lib: Avoid division by zero in apply_constraint_to_size()
ASoC: fsl_micfil: Add a flag to distinguish with different volume control types
ASoC: codecs: lpass-rx-macro: fix RXn(rx,n) macro for DSM_CTL and SEC7 regs
ASoC: Change my e-mail to gmail
ASoC: Intel: soc-acpi: lnl: Add match entry for TM2 laptops
ASoC: amd: yc: Fix non-functional mic on ASUS E1404FA
ASoC: SOF: Intel: hda: Always clean up link DMA during stop
soundwire: intel_ace2x: Send PDI stream number during prepare
ASoC: SOF: Intel: hda: Handle prepare without close for non-HDA DAI's
ASoC: SOF: ipc4-topology: Do not set ALH node_id for aggregated DAIs
MAINTAINERS: Update maintainer list for MICROCHIP ASOC, SSC and MCP16502 drivers
ASoC: qcom: Select missing common Soundwire module code on SDM845
ASoC: fsl_esai: change dev_warn to dev_dbg in irq handler
ASoC: rsnd: Fix probe failure on HiHope boards due to endpoint parsing
...
|
|
Pull drm fixes from Dave Airlie:
"Weekly drm fixes, mostly amdgpu and xe, with minor bridge and an i915
Kconfig fix. Nothing too scary and it seems to be pretty quiet.
amdgpu:
- ACPI method handling fixes
- SMU 14.x fixes
- Display idle optimization fix
- DP link layer compliance fix
- SDMA 7.x fix
- PSR-SU fix
- SWSMU fix
i915:
- Fix DRM_I915_GVT_KVMGT dependencies in Kconfig
xe:
- Increase invalidation timeout to avoid errors in some hosts
- Flush worker on timeout
- Better handling for force wake failure
- Improve argument check on user fence creation
- Don't restart parallel queues multiple times on GT reset
bridge:
- aux: Fix assignment of OF node
- tc358767: Add missing of_node_put() in error path"
* tag 'drm-fixes-2024-10-25' of https://gitlab.freedesktop.org/drm/kernel:
drm/xe: Don't restart parallel queues multiple times on GT reset
drm/xe/ufence: Prefetch ufence addr to catch bogus address
drm/xe: Handle unreliable MMIO reads during forcewake
drm/xe/guc/ct: Flush g2h worker in case of g2h response timeout
drm/xe: Enlarge the invalidation timeout from 150 to 500
drm/amdgpu: handle default profile on on devices without fullscreen 3D
drm/amd/display: Disable PSR-SU on Parade 08-01 TCON too
drm/amdgpu: fix random data corruption for sdma 7
drm/amd/display: temp w/a for DP Link Layer compliance
drm/amd/display: temp w/a for dGPU to enter idle optimizations
drm/amd/pm: update deep sleep status on smu v14.0.2/3
drm/amd/pm: update overdrive function on smu v14.0.2/3
drm/amd/pm: update the driver-fw interface file for smu v14.0.2/3
drm/amd: Guard against bad data for ATIF ACPI method
drm/bridge: tc358767: fix missing of_node_put() in for_each_endpoint_of_node()
drm/bridge: Fix assignment of the of_node of the parent to aux bridge
i915: fix DRM_I915_GVT_KVMGT dependencies
|
|
write_super() -> sb_counters_from_cpu() may reallocate the superblock
Reported-by: syzbot+9fc4dac4775d07bcfe34@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
c->btree_roots_known[i].b can be NULL. In this case, a NULL pointer dereference
occurs, so you need to add code to check the variable.
Reported-by: syzbot+b468b9fef56949c3b528@syzkaller.appspotmail.com
Fixes: 7773df19c35f ("bcachefs: metadata version bucket_stripe_sectors")
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
In commit 63fb3ec80516 ("sched_ext: Allow only user DSQs for
scx_bpf_consume(), scx_bpf_dsq_nr_queued() and bpf_iter_scx_dsq_new()"), we
updated the consume path to only accept user DSQs, thus making it invalid
to consume SCX_DSQ_GLOBAL. This selftest was doing that, so let's create a
custom DSQ and use that instead. The test now passes:
[root@virtme-ng sched_ext]# ./runner -t exit
===== START =====
TEST: exit
DESCRIPTION: Verify we can cleanly exit a scheduler in multiple places
OUTPUT:
[ 12.387229] sched_ext: BPF scheduler "exit" enabled
[ 12.406064] sched_ext: BPF scheduler "exit" disabled (unregistered from BPF)
[ 12.453325] sched_ext: BPF scheduler "exit" enabled
[ 12.474064] sched_ext: BPF scheduler "exit" disabled (unregistered from BPF)
[ 12.515241] sched_ext: BPF scheduler "exit" enabled
[ 12.532064] sched_ext: BPF scheduler "exit" disabled (unregistered from BPF)
[ 12.592063] sched_ext: BPF scheduler "exit" disabled (unregistered from BPF)
[ 12.654063] sched_ext: BPF scheduler "exit" disabled (unregistered from BPF)
[ 12.715062] sched_ext: BPF scheduler "exit" disabled (unregistered from BPF)
ok 1 exit #
===== END =====
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
The x86 user pointer validation changes made me look at compiler output
a lot, and the wrong indentation for the ".popsection" in the generated
assembler triggered me.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
It turns out that AMD has a "Meltdown Lite(tm)" issue with non-canonical
accesses in kernel space. And so using just the high bit to decide
whether an access is in user space or kernel space ends up with the good
old "leak speculative data" if you have the right gadget using the
result:
CVE-2020-12965 “Transient Execution of Non-Canonical Accesses“
Now, the kernel surrounds the access with a STAC/CLAC pair, and those
instructions end up serializing execution on older Zen architectures,
which closes the speculation window.
But that was true only up until Zen 5, which renames the AC bit [1].
That improves performance of STAC/CLAC a lot, but also means that the
speculation window is now open.
Note that this affects not just the new address masking, but also the
regular valid_user_address() check used by access_ok(), and the asm
version of the sign bit check in the get_user() helpers.
It does not affect put_user() or clear_user() variants, since there's no
speculative result to be used in a gadget for those operations.
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com>
Link: https://lore.kernel.org/all/80d94591-1297-4afb-b510-c665efd37f10@citrix.com/
Link: https://lore.kernel.org/all/20241023094448.GAZxjFkEOOF_DM83TQ@fat_crate.local/ [1]
Link: https://www.amd.com/en/resources/product-security/bulletin/amd-sb-1010.html
Link: https://arxiv.org/pdf/2108.10771
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Tested-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com> # LAM case
Fixes: 2865baf54077 ("x86: support user address masking instead of non-speculative conditional")
Fixes: 6014bc27561f ("x86-64: make access_ok() independent of LAM")
Fixes: b19b74bc99b1 ("x86/mm: Rework address range check in get_user() and put_user()")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
CXL spec rev 3.0 section 8.2.9.2.1.2 defines the DRAM Event Record.
Fix decode memory event type field of DRAM Event Record.
For e.g. if value is 0x1 it will be reported as an Invalid Address
(General Media Event Record - Memory Event Type) instead of Scrub Media
ECC Error (DRAM Event Record - Memory Event Type) and so on.
Fixes: 2d6c1e6d60ba ("cxl/mem: Trace DRAM Event Record")
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Link: https://patch.msgid.link/20241014143003.1170-1-shiju.jose@huawei.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
|
|
Currently, an unconditional cache flush is performed during every
microcode update. Although the original changelog did not mention
a specific erratum, this measure was primarily intended to address
a specific microcode bug, the load of which has already been blocked by
is_blacklisted(). Therefore, this cache flush is no longer necessary.
Additionally, the side effects of doing this have been overlooked. It
increases CPU rendezvous time during late loading, where the cache flush
takes between 1x to 3.5x longer than the actual microcode update.
Remove native_wbinvd() and update the erratum name to align with the
latest errata documentation, document ID 334163 Version 022US.
[ bp: Zap the flaky documentation URL. ]
Fixes: 91df9fdf5149 ("x86/microcode/intel: Writeback and invalidate caches before updating microcode")
Reported-by: Yan Hua Wu <yanhua1.wu@intel.com>
Reported-by: William Xie <william.xie@intel.com>
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Ashok Raj <ashok.raj@intel.com>
Tested-by: Yan Hua Wu <yanhua1.wu@intel.com>
Link: https://lore.kernel.org/r/20241001161042.465584-2-chang.seok.bae@intel.com
|
|
If more than 255 colocated APs exist for the set of all
APs found during 2.4/5 GHz scanning, then the 6 GHz scan
construction will loop forever since the loop variable
has type u8, which can never reach the number found when
that's bigger than 255, and is stored in a u32 variable.
Also move it into the loops to have a smaller scope.
Using a u32 there is fine, we limit the number of APs in
the scan list and each has a limit on the number of RNR
entries due to the frame size. With a limit of 1000 scan
results, a frame size upper bound of 4096 (really it's
more like ~2300) and a TBTT entry size of at least 11,
we get an upper bound for the number of ~372k, well in
the bounds of a u32.
Cc: stable@vger.kernel.org
Fixes: eae94cf82d74 ("iwlwifi: mvm: add support for 6GHz")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219375
Link: https://patch.msgid.link/20241023091744.f4baed5c08a1.I8b417148bbc8c5d11c101e1b8f5bf372e17bf2a7@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When we free wdev->cqm_config when unregistering, we also
need to clear out the pointer since the same wdev/netdev
may get re-registered in another network namespace, then
destroyed later, running this code again, which results in
a double-free.
Reported-by: syzbot+36218cddfd84b5cc263e@syzkaller.appspotmail.com
Fixes: 37c20b2effe9 ("wifi: cfg80211: fix cqm_config access race")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20241022161742.7c34b2037726.I121b9cdb7eb180802eafc90b493522950d57ee18@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
ieee80211_calc_hw_conf_chan was ignoring the configured
user_txpower. If it is set, use it to potentially decrease
txpower as requested.
Signed-off-by: Ben Greear <greearb@candelatech.com>
Link: https://patch.msgid.link/20241010203954.1219686-1-greearb@candelatech.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Revert commit dfdfe4be183b ("wifi: iwlwifi: remove retry loops in
start"), it turns out that there's an issue with the PNVM load
notification from firmware not getting processed, that this patch
has been somewhat successfully papering over. Since this is being
reported, revert the loop removal for now.
We will later at least clean this up to only attempt to retry if
there was a timeout, but currently we don't even bubble up the
failure reason to the correct layer, only returning NULL.
Fixes: dfdfe4be183b ("wifi: iwlwifi: remove retry loops in start")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20241022092212.4aa82a558a00.Ibdeff9c8f0d608bc97fc42024392ae763b6937b7@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When we add the vif (and its default link) in fw restart we may
override the link that already exists. We take care of this but if
link 0 is a valid MLO link, then we will re-create a default link on
mvmvif->link[0] and we'll loose the real link we had there.
In non-MLO, we need to re-create the default link upon the interface
creation, this is fine. In MLO, we'll just wait for change_vif_links()
to re-build the links.
Fixes: bf976c814c86 ("wifi: iwlwifi: mvm: implement link change ops")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241010140328.385bfea1b2e9.I4a127312285ccb529cc95cc4edf6fbe1e0a136ad@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
1. The size of the response packet is not validated.
2. The response buffer is not freed.
Resolve these issues by switching to iwl_mvm_send_cmd_status(),
which handles both size validation and frees the buffer.
Fixes: f130bb75d881 ("iwlwifi: add FW recovery flow")
Signed-off-by: Daniel Gabay <daniel.gabay@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241010140328.76c73185951e.Id3b6ca82ced2081f5ee4f33c997491d0ebda83f7@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
SAR table format in ACPI and local data base are different,
So modified code to read data properly.
Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241010140328.f077aced4dee.I4dc618f12d01f7ad19f9f8881f6e09eea77e9a14@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When starting the suspend flow, HOST_D3_START triggers an _async_
firmware dump collection for debugging purposes. The async worker
may race with suspend flow and fail to get NIC access, resulting in
the following warning:
"Timeout waiting for hardware access (CSR_GP_CNTRL 0xffffffff)"
Fix this by switching to the sync version to ensure the dump
completes before proceeding with the suspend flow, avoiding
potential race issues.
Signed-off-by: Daniel Gabay <daniel.gabay@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241010140328.9aae318cd593.I4b322009f39489c0b1d8893495c887870f73ed9c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
iwl_mvm_send_ap_tx_power_constraint_cmd is a no-op if the link is not
active (we need to know the band etc.)
However, for the station case it will be called just before we set the
link to active (by calling iwl_mvm_link_changed with
the LINK_CONTEXT_MODIFY_ACTIVE bit set in the 'changed' flags and
active = true), so it will end up doing nothing.
Fix this by calling iwl_mvm_send_ap_tx_power_constraint_cmd before
iwl_mvm_link_changed.
Fixes: 6b82f4e119d1 ("wifi: iwlwifi: mvm: handle TPE advertised by AP")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241010140328.5c235fccd3f1.I2d40dea21e5547eba458565edcb4c354d094d82a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Release the link mapping resource in AP removal. This impacted devices
that do not support the MLD API (9260 and down).
On those devices, we couldn't start the AP again after the AP has been
already started and stopped.
Fixes: a8b5d4809b50 ("wifi: iwlwifi: mvm: Configure the link mapping for non-MLD FW")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241010140328.c54c42779882.Ied79e0d6244dc5a372e8b6ffa8ee9c6e1379ec1d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Merge a dtpm_devfreq power capping driver fix for 6.12-rc5:
- Fix a dev_pm_qos_add_request() return value check in
__dtpm_devfreq_setup() to prevent it from failing if
a positive number is returned (Yuan Can).
* pm-powercap:
powercap: dtpm_devfreq: Fix error check against dev_pm_qos_add_request()
|
|
Merge new DMI quirks for 6.12-rc5:
- Add an ACPI IRQ override quirk for LG 16T90SP (Christian Heusel).
- Add a lid switch detection quirk for Samsung Galaxy Book2 (Shubham
Panwar).
* acpi-resource:
ACPI: resource: Add LG 16T90SP to irq1_level_low_skip_override[]
* acpi-button:
ACPI: button: Add DMI quirk for Samsung Galaxy Book2 to fix initial lid detection issue
|
|
It wasn't there when the patch was posted for review, but somehow made it
into the pull.
Link: https://lore.kernel.org/all/20240913104703.1673180-1-mszeredi@redhat.com/
Fixes: efad7153bf93 ("fuse: allow O_PATH fd for FUSE_DEV_IOC_BACKING_OPEN")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred for
presenting attributes to user space in sysfs. Convert the left-over uses
in the netiucv code.
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred for
presenting attributes to user space in sysfs. Convert the left-over uses
in the vfio_ap code.
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Reviewed-by: Anthony Krowiak <akrowiak@linux.ibm.com>
Tested-by: Anthony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
