| Age | Commit message (Collapse) | Author |
|---|
|
On the older 5750X (P5) chips, we currently support only 1 TX PTP
packet in-flight waiting for the timestamp. Refactor the
datastructures to prepare to support up to 4 TX PTP packets.
Combine all fields required for PTP TX timestamp query into one
structure. An array of this structure will be added in follow-on
patches to support multiple outstanding TX timestamps.
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
BCM5760X firmware will advertise direct 64-bit PHC registers access
for the driver from BAR0.
Make the necessary changes in handling HWRM_PORT_MAC_PTP_QCFG's
response and PHC register mapping for 5760X chips.
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The new BCM5760X chips will return the timestamp of TX packets in a
new completion. Add logic in __bnxt_poll_work() to handle this
completion type to retrieve the timestamp. This feature eliminates
the limit on the number of in-flight PTP TX packets.
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The driver's current logic will always free all the TX SKBs up to
txr->tx_hw_cons within NAPI. In the next patches, we'll be adding
logic to handle TX timestamp completion and we may need to hold
some remaining TX SKBs if we don't have the timestamp completions
yet.
Modify __bnxt_poll_work_done() to clear each event bit separately to
allow bnapi->tx_int() to decide whether to clear BNXT_TX_CMP_EVENT or
not. bnapi->tx_int() will not clear BNXT_TX_CMP_EVENT if some TX
SKBs are held waiting for TX timestamps. Note that legacy chips will
never hold any SKBs this way. The SKB is always deferred to the PTP
worker slow path to retrieve the timestamp from firmware. On the new
P7 chips, the timestamp is returned by the hardware directly and we
can retrieve it directly from NAPI.
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Remove the unused is_gso field and add the is_ts_pkt field to struct
bnxt_sw_tx_bd. This field will mark the TX BD that has requested
HW TX timestamp. The field needs to be cleared if the timestamp packet
is later aborted. This field will be useful when processing the
new TX timestamp completion from the hardware in the next patches.
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The new BCM5760X chips will generate this new TX timestamp completion
when a TX packet's timestamp has been taken right before transmission.
The driver logic to retrieve the timestamp will be added in the next
few patches.
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Octeontx2 hardware uses Near Data Cache(NDC) block to cache
contexts in it so that access to LLC/DRAM can be avoided.
It is recommended in HRM to sync the NDC contents before
releasing/resetting LF resources. Hence implement NDC_SYNC
mailbox and sync contexts during driver teardown.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Call phylink_ethtool_ksettings_get() for get_link_ksettings method and
ethtool_op_get_link() for get_link method.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Adds test for the cmdline parser, connector property, and
drm_analog_tv_mode to ensure the behaviour of the new value is
correct.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240620110947.3615207-1-dave.stevenson@raspberrypi.com
|
|
Add sound support for R-Car V4M.
[Kuninori: adjusted to latest upstream kernel]
Co-developed-by: Khanh Le <khanh.le.xr@renesas.com>
Signed-off-by: Khanh Le <khanh.le.xr@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/87ed8nkxeq.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
R-Car V4H (R8A779G0) supports only 1 AUDIO_CLKOUT and 1 SSI,
thus, #clock-cells / #sound-dai-cells are both fixed to zero.
(#sound-dai-cells is needed for Simple-Audio-Card, but not needed for
Audio-Graph-Card). Fix this up.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/87frt3kxew.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add interrupt-names properties to device nodes that represent ARM
architected timers for clarity.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/e5e2767011322daaebcc8dd6ecfcadc6966042d5.1718890849.git.geert+renesas@glider.be
|
|
Add interrupt-names properties to device nodes that represent ARM
architected timers for clarity.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/b964e2f916cc23b6272e158c7b24597c971a82a5.1718890849.git.geert+renesas@glider.be
|
|
Add the missing fifth interrupt to the device node that represents the
ARM architected timer. While at it, add an interrupt-names property for
clarity,
Fixes: e20396d65b959a65 ("arm64: dts: renesas: Add initial DTSI for RZ/G3S SoC")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://lore.kernel.org/884c683fb6c1d1bf7d0d383a8df8f65a0a424dc7.1718890849.git.geert+renesas@glider.be
|
|
Add the missing fifth interrupt to the device node that represents the
ARM architected timer. While at it, add an interrupt-names property for
clarity,
Fixes: 7c2b8198f4f321df ("arm64: dts: renesas: Add initial DTSI for RZ/V2L SoC")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/834244e77e5f407ee6fab1ab5c10c98a8a933085.1718890849.git.geert+renesas@glider.be
|
|
Add the missing fifth interrupt to the device node that represents the
ARM architected timer. While at it, add an interrupt-names property for
clarity,
Fixes: 68a45525297b2e9a ("arm64: dts: renesas: Add initial DTSI for RZ/G2{L,LC} SoC's")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/21f556eb7e903d5b9f4c96188fd4b6ae0db71856.1718890849.git.geert+renesas@glider.be
|
|
Add the missing fifth interrupt to the device node that represents the
ARM architected timer. While at it, add an interrupt-names property for
clarity,
Fixes: cf40c9689e5109bf ("arm64: dts: renesas: Add initial DTSI for RZ/G2UL SoC")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/15cc7a7522b1658327a2bd0c4990d0131bbcb4d7.1718890849.git.geert+renesas@glider.be
|
|
Add the missing fifth interrupt to the device node that represents the
ARM architected timer. While at it, add an interrupt-names property for
clarity,
Fixes: 987da486d84a5643 ("arm64: dts: renesas: Add Renesas R8A779G0 SoC support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/5eeabbeaea1c5fd518a608f2e8013d260b00fd7e.1718890849.git.geert+renesas@glider.be
|
|
Add the missing fifth interrupt to the device node that represents the
ARM architected timer. While at it, add an interrupt-names property for
clarity,
Fixes: c62331e8222f8f21 ("arm64: dts: renesas: Add Renesas R8A779F0 SoC support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/46deba1008f73e4b6864f937642d17f9d4ae7205.1718890849.git.geert+renesas@glider.be
|
|
Add the missing fifth interrupt to the device node that represents the
ARM architected timer. While at it, add an interrupt-names property for
clarity,
Fixes: 834c310f541839b6 ("arm64: dts: renesas: Add Renesas R8A779A0 SoC support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/671416fb31e3992101c32fe7e46147fe4cd623ae.1718890849.git.geert+renesas@glider.be
|
|
The four Cortex-A76 CPU cores on R-Car V4M share their Operating
Performance Points (OPP) table, but they have independent clocks.
All cores in the cluster can switch DVFS states independently, hence
the cluster's OPP table should not have an "opp-shared" property.
Fixes: 6bd8b0bc444eae56 ("arm64: dts: renesas: r8a779h0: Add CA76 operating points")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/4e0227ff4388485cdb1ca2855ee6df92754e756e.1718890585.git.geert+renesas@glider.be
|
|
This is a sloppy logic analyzer using GPIOs. It comes with a script to
isolate a CPU for polling. While this is definitely not a production
level analyzer, it can be a helpful first view when remote debugging.
Read the documentation for details.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240620094159.6785-2-wsa+renesas@sang-engineering.com
[Bartosz: moved the Kconfig entry into a different category]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next into main
Pablo Neira Ayuso says:
====================
Netfilter/IPVS updates for net-next
The following patchset contains Netfilter/IPVS updates for net-next:
Patch #1 to #11 to shrink memory consumption for transaction objects:
struct nft_trans_chain { /* size: 120 (-32), cachelines: 2, members: 10 */
struct nft_trans_elem { /* size: 72 (-40), cachelines: 2, members: 4 */
struct nft_trans_flowtable { /* size: 80 (-48), cachelines: 2, members: 5 */
struct nft_trans_obj { /* size: 72 (-40), cachelines: 2, members: 4 */
struct nft_trans_rule { /* size: 80 (-32), cachelines: 2, members: 6 */
struct nft_trans_set { /* size: 96 (-24), cachelines: 2, members: 8 */
struct nft_trans_table { /* size: 56 (-40), cachelines: 1, members: 2 */
struct nft_trans_elem can now be allocated from kmalloc-96 instead of
kmalloc-128 slab.
Series from Florian Westphal. For the record, I have mangled patch #1
to add nft_trans_container_*() and use if for every transaction object.
I have also added BUILD_BUG_ON to ensure struct nft_trans always comes
at the beginning of the container transaction object. And few minor
cleanups, any new bugs are of my own.
Patch #12 simplify check for SCTP GSO in IPVS, from Ismael Luceno.
Patch #13 nf_conncount key length remains in the u32 bound, from Yunjian Wang.
Patch #14 removes unnecessary check for CTA_TIMEOUT_L3PROTO when setting
default conntrack timeouts via nfnetlink_cttimeout API, from
Lin Ma.
Patch #15 updates NFT_SECMARK_CTX_MAXLEN to 4096, SELinux could use
larger secctx names than the existing 256 bytes length.
Patch #16 adds a selftest to exercise nfnetlink_queue listeners leaving
nfnetlink_queue, from Florian Westphal.
Patch #17 increases hitcount from 255 to 65535 in xt_recent, from Phil Sutter.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Jakub Kicinski says:
====================
tcp_metrics: add netlink protocol spec in YAML
Add a netlink protocol spec for the tcp_metrics generic netlink family.
First patch adjusts the uAPI header guards to make it easier to build
tools/ with non-system headers.
v1: https://lore.kernel.org/all/20240626201133.2572487-1-kuba@kernel.org
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a protocol spec for tcp_metrics, so that it's accessible via YNL.
Useful at the very least for testing fixes.
In this episode of "10,000 ways to complicate netlink" the metric
nest has defines which are off by 1. iproute2 does:
struct rtattr *m[TCP_METRIC_MAX + 1 + 1];
parse_rtattr_nested(m, TCP_METRIC_MAX + 1, a);
for (i = 0; i < TCP_METRIC_MAX + 1; i++) {
// ...
attr = m[i + 1];
This is too weird to support in YNL, add a new set of defines
with _correct_ values to the official kernel header.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
tcp_metrics' header lacks the customary _UAPI in the header guard.
This makes YNL build rules work less seamlessly.
We can easily fix that on YNL side, but this could also be
problematic if we ever needed to create a kernel-only tcp_metrics.h.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
I don't see anything checking that TCP_METRICS_ATTR_SADDR_IPV4
is at least 4 bytes long, and the policy doesn't have an entry
for this attribute at all (neither does it for IPv6 but v6 is
manually validated).
Reviewed-by: Eric Dumazet <edumazet@google.com>
Fixes: 3e7013ddf55a ("tcp: metrics: Allow selective get/del of tcp-metrics based on src IP")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Realtek RTL8211F Ethernet PHY supports 3 LED pins which are used to
indicate link status and activity. Add minimal LED controller driver
supporting the most common uses with the 'netdev' trigger.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
syscon nodes should always have dedicated compatible for full/accurate
hardware description.
Link: https://lore.kernel.org/r/20240519-dt-bindings-mfd-syscon-split-v1-8-aaf996e2313a@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
The Tegra BPMP reset driver can be compiled without TEGRA_BPMP being
enabled. Allow it to be built under COMPILE_TEST.
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20240625-reset-compile-bpmp-v1-1-647e846303d8@pengutronix.de
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Update description of reconfiguration rules, adding requirement that a
direction flag be set to enable changing configuration for a line.
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20240626052925.174272-5-warthog618@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Update description of reconfiguration rules, adding requirement that a
direction flag be set or the configuration is considered invalid.
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20240626052925.174272-4-warthog618@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
For MTL+ platforms we use PICA chips for Type-C support and
hence mg programming is not needed.
Fixes issue with drm warn of TC port not being in legacy mode.
Cc: stable@vger.kernel.org
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240625111840.597574-1-mika.kahola@intel.com
(cherry picked from commit aaf9dc86bd806458f848c39057d59e5aa652a399)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Explicitly set the 'family' driver_info struct member for leafimx.
Previously, the correct operation relied on KVASER_LEAF being the first
defined value in enum kvaser_usb_leaf_family.
Fixes: e6c80e601053 ("can: kvaser_usb: kvaser_usb_leaf: fix CAN clock frequency regression")
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/all/20240628194529.312968-1-extja@kvaser.com
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
'struct shutdown_handler' is not modified in this driver.
Constifying this structure moves some data to a read-only section, so
increase overall security.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
7043 788 8 7839 1e9f drivers/xen/manage.o
After:
=====
text data bss dec hex filename
7164 676 8 7848 1ea8 drivers/xen/manage.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/ca1e75f66aed43191cf608de6593c7d6db9148f1.1719134768.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Implement FITRIM for the realtime device by pretending that it's
"space" immediately after the data device. We have to hold the
rtbitmap ILOCK while the discard operations are ongoing because there's
no busy extent tracking for the rt volume to prevent reallocations.
Cc: Konst Mayer <cdlscpmv@gmail.com>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
Following warning is reported, so remove these duplicated header
including:
./fs/xfs/libxfs/xfs_trans_resv.c: xfs_da_format.h is included more than once.
./fs/xfs/scrub/quota_repair.c: xfs_format.h is included more than once.
./fs/xfs/xfs_handle.c: xfs_da_btree.h is included more than once.
./fs/xfs/xfs_qm_bhv.c: xfs_mount.h is included more than once.
./fs/xfs/xfs_trace.c: xfs_bmap.h is included more than once.
This is just a clean code, no logic changed.
Signed-off-by: Wenchao Hao <haowenchao22@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
Now that the page fault handler has been refactored, the only caller
of xfs_ilock_for_write_fault is simple enough and calls it
unconditionally. Fold the logic and expand the comments explaining it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
After the previous refactoring, xfs_dax_fault is now never used for write
faults, so don't bother with the xfs_ilock_for_write_fault logic to
protect against writes when remapping is in progress.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
Split the write fault and DAX fault handling into separate helpers
so that the main fault handler is easier to follow.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
Replace the separate stub with an IS_ENABLED check, and take the call to
dax_finish_sync_fault into xfs_dax_fault instead of leaving it in the
caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
Move the relock path out of the straight line and add a comment
explaining why it exists.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
About half of xfs_ilock_for_iomap deals with a special case for direct
I/O writes to COW files that need to take the ilock exclusively. Move
this code into the one callers that cares and simplify
xfs_ilock_for_iomap.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
This adds sanity checks for xfs_dir2_data_unused and xfs_dir2_data_entry
to make sure don't stray beyond valid memory region. Before patching, the
loop simply checks that the start offset of the dup and dep is within the
range. So in a crafted image, if last entry is xfs_dir2_data_unused, we
can change dup->length to dup->length-1 and leave 1 byte of space. In the
next traversal, this space will be considered as dup or dep. We may
encounter an out of bound read when accessing the fixed members.
In the patch, we make sure that the remaining bytes large enough to hold
an unused entry before accessing xfs_dir2_data_unused and
xfs_dir2_data_unused is XFS_DIR2_DATA_ALIGN byte aligned. We also make
sure that the remaining bytes large enough to hold a dirent with a
single-byte name before accessing xfs_dir2_data_entry.
Signed-off-by: lei lu <llfamsec@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
There is a lack of verification of the space occupied by fixed members
of xlog_op_header in the xlog_recover_process_data.
We can create a crafted image to trigger an out of bounds read by
following these steps:
1) Mount an image of xfs, and do some file operations to leave records
2) Before umounting, copy the image for subsequent steps to simulate
abnormal exit. Because umount will ensure that tail_blk and
head_blk are the same, which will result in the inability to enter
xlog_recover_process_data
3) Write a tool to parse and modify the copied image in step 2
4) Make the end of the xlog_op_header entries only 1 byte away from
xlog_rec_header->h_size
5) xlog_rec_header->h_num_logops++
6) Modify xlog_rec_header->h_crc
Fix:
Add a check to make sure there is sufficient space to access fixed members
of xlog_op_header.
Signed-off-by: lei lu <llfamsec@gmail.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
The RT extent range must be considered in the xfs_flush_unmap_range() call
to stabilize the boundary.
This code change is originally from Dave Chinner.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
Currently xfs_flush_unmap_range() does unmap for a full RT extent range,
which we also want to ensure is clean and idle.
This code change is originally from Dave Chinner.
Reviewed-by: Christoph Hellwig <hch@lst.de>4
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
Currently AGFL blocks can be filled from the following three sources:
- allocbt free blocks, as in xfs_allocbt_free_block();
- rmapbt free blocks, as in xfs_rmapbt_free_block();
- refilled from freespace btrees, as in xfs_alloc_fix_freelist().
Originally, allocbt free blocks would be marked as stale only when they
put back in the general free space pool as Dave mentioned on IRC, "we
don't stale AGF metadata btree blocks when they are returned to the
AGFL .. but once they get put back in the general free space pool, we
have to make sure the buffers are marked stale as the next user of
those blocks might be user data...."
However, after commit ca250b1b3d71 ("xfs: invalidate allocbt blocks
moved to the free list") and commit edfd9dd54921 ("xfs: move buffer
invalidation to xfs_btree_free_block"), even allocbt / bmapbt free
blocks will be invalidated immediately since they may fail to pass
V5 format validation on writeback even writeback to free space would be
safe.
IOWs, IMHO currently there is actually no difference of free blocks
between AGFL freespace pool and the general free space pool. So let's
avoid extra redundant AGFL buffer invalidation, since otherwise we're
currently facing unnecessary xfs_log_force() due to xfs_trans_binval()
again on buffers already marked as stale before as below:
[ 333.507469] Call Trace:
[ 333.507862] xfs_buf_find+0x371/0x6a0 <- xfs_buf_lock
[ 333.508451] xfs_buf_get_map+0x3f/0x230
[ 333.509062] xfs_trans_get_buf_map+0x11a/0x280
[ 333.509751] xfs_free_agfl_block+0xa1/0xd0
[ 333.510403] xfs_agfl_free_finish_item+0x16e/0x1d0
[ 333.511157] xfs_defer_finish_noroll+0x1ef/0x5c0
[ 333.511871] xfs_defer_finish+0xc/0xa0
[ 333.512471] xfs_itruncate_extents_flags+0x18a/0x5e0
[ 333.513253] xfs_inactive_truncate+0xb8/0x130
[ 333.513930] xfs_inactive+0x223/0x270
xfs_log_force() will take tens of milliseconds with AGF buffer locked.
It becomes an unnecessary long latency especially on our PMEM devices
with FSDAX enabled and fsops like xfs_reflink_find_shared() at the same
time are stuck due to the same AGF lock. Removing the double
invalidation on the AGFL blocks does not make this issue go away, but
this patch fixes for our workloads in reality and it should also work
by the code analysis.
Note that I'm not sure I need to remove another redundant one in
xfs_alloc_ag_vextent_small() since it's unrelated to our workloads.
Also fstests are passed with this patch.
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
Add support for keyboard matrix version 3.0, which reduces keyboard
ghosting.
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/9ae4d96cc2ce8c9de8755b9beffb78c641100fe7.1719531519.git.dnojiri@chromium.org
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
|
|
|
