summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-03-21[media] tuner-core: remove the legacy is_stereo() callMauro Carvalho Chehab
Nobody is using this legacy call. Just remove it. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] tuner-core: Remove V4L1/V4L2 API switchMauro Carvalho Chehab
V4L1 was removed. So, the code there is just dead code. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] cx88: Don't allow opening a device while it is not readyMauro Carvalho Chehab
After registering the cdev, it would be possible do have an open on it. In a matter of fact, some versions of udev do this. So, move registration to the end and protect it with a mutex. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] cx88: use unlocked_ioctl for cx88-video.Mauro Carvalho Chehab
cx88-video has locks. don't use the locked ioctl version, as it is not needed. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] cx231xx: Add support for PV Xcapture USBMauro Carvalho Chehab
Adds support for Pixelviex Xcapture USB grabber device. This device has one composite and one s-video entry only, plus a button. For now, the button is not supported. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] cx231xx: Allow some boards to not use I2C port 3Mauro Carvalho Chehab
Some devices don't need to use it. So allow to just disable this logic. Having it enabled on some devices cause power management to complain, generating error -71. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] cx231xx: Use parameters to describe some board variantsMauro Carvalho Chehab
Instead of per-model tests all over the code, use some parameters at the board entries to describe the model variants for: - devices with 417 MPEG encoder; - devices that use external AV; - devices where vbi VANC endpoint doesn't work; - devices with xc5000 that require different IF initialization (and probably will cover also xc3028). - devices with xceive tuner that require a reset during init. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] cx231xx: Use a generic check for TUNER_XC5000Mauro Carvalho Chehab
The check for xc5000 assumes that the tuner will always be using the same bus and will have the same address. As those are configurable via dev->board, it should use, instead, the values defined there. Also, a similar type of test will be needed by other tuners (for example, for TUNER_XC2028) Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] cx231xx: Simplify interface checking logic at probeMauro Carvalho Chehab
Just a cleanup patch. Removes one indent level by moving the return -ENODEV to happen before the device register logic, if the interface is not the audio/video (int 1). Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] tuner-xc2028: More firmware loading retriesAlina Friedrichsen
My Hauppauge WinTV HVR-1400 needs sometimes more then only one retry to load the firmware successfully. Signed-off-by: Alina Friedrichsen <x-alina@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] double mutex lock in drivers/media/radio/si470x/radio-si470x-iceberg
KERNEL_VERSION: 2.6.37 common.c in function ssize_t si470x_fops_read. 1. First mutex_lock on &radio->lock in line 441 2. Second in line 462 I think that mutex in line 462 is not needed. 433static ssize_t si470x_fops_read(struct file *file, char __user *buf, 434 size_t count, loff_t *ppos) 435{ .... 441 mutex_lock(&radio->lock); 442 if ((radio->registers[SYSCONFIG1] & SYSCONFIG1_RDS) == 0) 443 si470x_rds_on(radio); 444 445 /* block if no new data available */ 446 while (radio->wr_index == radio->rd_index) { 447 if (file->f_flags & O_NONBLOCK) { 448 retval = -EWOULDBLOCK; 449 goto done; 450 } 451 if (wait_event_interruptible(radio->read_queue, 452 radio->wr_index != radio->rd_index) < 0) { 453 retval = -EINTR; 454 goto done; 455 } 456 } 457 458 /* calculate block count from byte count */ 459 count /= 3; 460 461 /* copy RDS block out of internal buffer and to user buffer */ 462 mutex_lock(&radio->lock); Found by Linux Device Drivers Verification Project Remove second mutex. Signed-off-by: Alexander Strakh <strakh@ispras.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] tm6000: add/rework reg.definesDmitri Belimov
Rework registers defines. Add TM6000 specific registers defines. Add marks and comments for TM6010 specific registers. Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] cpia2: convert to video_ioctl2Hans Verkuil
Unable to test this due to lack of hardware. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] pwc: convert to video_ioctl2Hans Verkuil
Tested with a Logitech QuickCam Pro 4000. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] pwc: convert to core-assisted lockingHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] vivi: fix compiler warningHans Verkuil
drivers/media/video/vivi.c:1059: warning: this decimal constant is unsigned only in ISO C90 Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] vivi: convert to the control framework and add test controlsHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] tvp7002: use control frameworkHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] vpx3220: use control frameworkHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] tvp5150: use the control frameworkHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] tvp514x: use the control frameworkHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] tlv320aic23b: use control frameworkHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] saa7110: use control frameworkHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] bt819: use control frameworkHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] adv7343: use control frameworkHans Verkuil
Also fixed a memory leak in the probe function if an error occurred. The gain control range was also fixed (a proper range from -64 to 64). Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] cx18: Use the control frameworkHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] cs5345: use the control frameworkHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] technisat-usb2: CodingStyle cleanupsMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] add support for Encore FM3Mauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] saa7134: Properly report when a board doesn't have eepromMauro Carvalho Chehab
When a device is not detected, the driver prints a warning message. That's ok, except for the fact that, even on newer devices that have eeprom but aren't yet supported, it prints a message saying that the device doesn't have eeprom. Fix it by having a separate message for devices with eeprom, but not yet known by the driver. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] tuner-simple: add support for Tena TNF5337 MFDMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] DocBook/v4l: fix validation errorsHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] v4l: vivi: port to videobuf2Pawel Osciak
Make vivi use videobuf2 in place of videobuf. Signed-off-by: Pawel Osciak <p.osciak@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> CC: Pawel Osciak <pawel@osciak.com> Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] ngene: Fix compilation when cxd2099 is not enabledMauro Carvalho Chehab
drivers/media/dvb/ngene/ngene-i2c.o: In function `cxd2099_attach': ngene-i2c.c:(.text+0x195): multiple definition of `cxd2099_attach' drivers/media/dvb/ngene/ngene-core.o:ngene-core.c:(.text+0x100): first defined here drivers/media/dvb/ngene/ngene-cards.o: In function `cxd2099_attach': ngene-cards.c:(.text+0x116): multiple definition of `cxd2099_attach' drivers/media/dvb/ngene/ngene-core.o:ngene-core.c:(.text+0x100): first defined here drivers/media/dvb/ngene/ngene-dvb.o: In function `cxd2099_attach': ngene-dvb.c:(.text+0x7ad): multiple definition of `cxd2099_attach' drivers/media/dvb/ngene/ngene-core.o:ngene-core.c:(.text+0x100): first defined here Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] Move CI cxd2099 driver to stagingMauro Carvalho Chehab
This driver is abusing the kernel<=>userspace API, due to the lack of a proper solution for it. A discussion were done at: http://www.mail-archive.com/linux-media@vger.kernel.org/msg22196.html But there's not a solution for it yet. So, move the driver to staging, while we don't have a final solution. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] stv090x: 22kHz workaround must also be performed for the 2nd frontendOliver Endriss
22kHz workaround must also be performed for the 2nd frontend. Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] ngene: Improved channel initialisation and releaseOliver Endriss
Refactored code for channel initialisation and release: - Do not create device nodes which are not required. - Better error handling. Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] stv090x: Fix losing lock in dual DVB-S2 modeOliver Endriss
Do not clear registers ACLC/BCLC in DVB-S2 mode for Cut <= 20. Otherwise, the demod could lose the lock periodically. Verified with cineS2 and Duoflex. Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] stv090x: Fixed typos in register macrosOliver Endriss
Fixed typos in register macros. Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] ngene: Fix copy-paste errorOliver Endriss
Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] get_dvb_firmware: ngene_18.fw addedOliver Endriss
Add download link for ngene firmware rev 18. Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] ngene: Enable CI for Mystique SaTiX-S2 Dual (v2)Oliver Endriss
Enable CI for Mystique SaTiX-S2 Dual (v2). Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] ngene: Add net deviceRalph Metzler
Add dvb net device. Note that the physical address must be setup manually. Signed-off-by: Ralph Metzler <rjkm@metzlerbros.de> Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] ngene: Shutdown workaroundRalph Metzler
Implement shutdown workaround for some chipsets. Signed-off-by: Ralph Metzler <rjkm@metzlerbros.de> Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] ngene: CXD2099AR Common Interface driverRalph Metzler
Driver for the Common Interface Controller CXD2099AR. Supports the CI of the cineS2 DVB-S2. For now, data is passed through '/dev/dvb/adapterX/sec0': - Encrypted data must be written to 'sec0'. - Decrypted data can be read from 'sec0'. - Setup the CAM using device 'ca0'. Signed-off-by: Ralph Metzler <rjkm@metzlerbros.de> Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] ngene: Clean-up driver initialisation (part 1)Oliver Endriss
If tuner initialisation failed, the frontend node was not removed. When the frontend was opened, a kernel oops occurred... This is the first step to improve error handling during initialisation. Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] ngene: Support up to 4 tunersOliver Endriss
Support up to 4 tuners for cineS2 v5, duoflex & mystique v2. Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] ngene: Fixes for TS input over I2SOliver Endriss
Fix TS input over I2S. Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] ngene: Firmware 18 supportOliver Endriss
Small modifications for firmware 18. Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] stv090x: Optional external lock routineOliver Endriss
Card driver may supply its own lock routine now. Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-15 06:06:06 +0000