summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-12-02iwlwifi: mvm: Ability to work with packed usniffer imageEran Harary
The new ucode package format holds also the usniffer images (in addition to the operational images and the TLVs). The driver can load the usniffer image if debug configuration tells it to. Signed-off-by: Eran Harary <eran.harary@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-02iwlwifi: pcie: support more monitor types dumpingLiad Kaufman
Until this patch, dumping the monitor data could be done only for PCIe external (DRAM) mode in 7000 HW family. This patch allows to pull the monitor data also on other families, and also to pull the monitor data if an internal buffer is used. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-02iwlwifi: pcie: config regs according to fw tlvLiad Kaufman
Sometimes there is a need to configure some registers for setting some FW properties, such as the FW monitor mode (internal/external). This patch supports setting this for PCIe mode. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-02iwlwifi: mvm: send dbg config hcmds to fw if set in tlvLiad Kaufman
Send all debug-configuration HCMDs that are set in the TLVs to the FW. This may include HCMDs to configure the FW monitor and FW log level, for example. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-02iwlwifi: define the .ucode file format for debugLiad Kaufman
Debug information can be appended to the firmware file. This information will be used by the driver to enable / disable debugging features in the firmware. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-02iwlwifi: mvm: update values for Smart FifoEmmanuel Grumbach
Interoperability issues were identified and root caused to the Smart Fifo watermarks. These issues arose with NetGear R7000. Fix this. Cc: <stable@vger.kernel.org> [3.14+] Fixes: 1f3b0ff8ecce ("iwlwifi: mvm: Add Smart FIFO support") Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-02iwlwifi: dvm: fix flush support for old firmwareEmmanuel Grumbach
Since the commit below, iwldvm sends the FLUSH command to the firmware. All the devices that use iwldvm have a firmware that expects the _v3 version of this command, besides 5150. 5150's latest available firmware still expects a _v2 version of the FLUSH command. This means that since the commit below, we had a mismatch for this specific device only. This mismatch led to the NMI below: Loaded firmware version: 8.24.2.2 Start IWL Error Log Dump: Status: 0x0000004C, count: 5 0x00000004 | NMI_INTERRUPT_WDG 0x000006F4 | uPc 0x000005BA | branchlink1 0x000006F8 | branchlink2 0x000008C2 | interruptlink1 0x00005B02 | interruptlink2 0x00000002 | data1 0x07030000 | data2 0x00000068 | line 0x3E80510C | beacon time 0x728A0EF4 | tsf low 0x0000002A | tsf hi 0x00000000 | time gp1 0x01BDC977 | time gp2 0x00000000 | time gp3 0x00010818 | uCode version 0x00000000 | hw version 0x00484704 | board version 0x00000002 | hcmd 0x2FF23080 | isr0 0x0103E000 | isr1 0x0000001A | isr2 0x1443FCC3 | isr3 0x11800112 | isr4 0x00000068 | isr_pref 0x000000D4 | wait_event 0x00000000 | l2p_control 0x00000007 | l2p_duration 0x00103040 | l2p_mhvalid 0x00000007 | l2p_addr_match 0x00000000 | lmpm_pmg_sel 0x00000000 | timestamp 0x00000200 | flow_handler This was reported here: https://bugzilla.kernel.org/show_bug.cgi?id=88961 Cc: <stable@vger.kernel.org> Fixes: a0855054e59b ("iwlwifi: dvm: drop non VO frames when flushing") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-02iwlwifi: use correct fw file in 8000 b-stepLiad Kaufman
In 8000 B-step the FW file has changed, but by the time we know the HW step, the FW file is already requested. This patch defaults 8000 family to B-step if no HW step is detected in time. When it can it checks what HW step it really is (in 8000 family) and if it isn't B-step, the FW file is released and the A-step file is requested. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-02iwlwifi: fix 4165 series nameOren Givon
Fix the 4165 series name that was called 4265 by mistake. Signed-off-by: Oren Givon <oren.givon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-02Bluetooth: Track both local and remote L2CAP fixed channel maskJohan Hedberg
To pave the way for future fixed channels to be added easily we should track both the local and remote mask on a per-L2CAP connection (struct l2cap_conn) basis. So far the code has used a global variable in a racy way which anyway needs fixing. This patch renames the existing conn->fixed_chan_mask that tracked the remote mask to conn->remote_fixed_chan and adds a new variable conn->local_fixed_chan to track the local mask. Since the HS support info is now available in the local mask we can remove the conn->hs_enabled variable. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-12-02Merge tag 'keys-fixes-20141201' of ↵James Morris
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs into for-linus
2014-12-02nouveau: move the hotplug ignore to correct place.Dave Airlie
Introduced in b440bde74f, however it was added to the wrong function in nouveau. https://bugzilla.kernel.org/show_bug.cgi?id=86011 Cc: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org # v3.15+ Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-12-02Merge branch 'linux-3.18' of ↵Dave Airlie
git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes Just a couple of fixes for the fallout from the fence rework. * 'linux-3.18' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: drm/nouveau/gf116: remove copy1 engine drm/nouveau: prevent stale fence->channel pointers, and protect with rcu drm/nouveau/fifo/g84-: ack non-stall interrupt before handling it
2014-12-02drm/nouveau/gf116: remove copy1 engineIlia Mirkin
Indications are that no GF116's actually have a copy engine there, but actually have the decompression engine. This engine can be made to do copies, but that should be done separately. Unclear why this didn't turn up on all GF116's, but perhaps the non-mobile ones came with enough VRAM to not trigger ttm migrations in test scenarios. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=85465 Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=59168 Cc: stable@vger.kernel.org Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-12-02drm/nouveau: prevent stale fence->channel pointers, and protect with rcuMaarten Lankhorst
Tested-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-12-02drm/nouveau/fifo/g84-: ack non-stall interrupt before handling itBen Skeggs
Closes a very unlikely race that can occur if another NonStallInterrupt method passes between checking fences and acking the previous interrupt. With this change, the interrupt will re-fire under such conditions. Tested-by: Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-12-01Merge tag 'ext4_for_linus_urgent' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 bugfix from Ted Ts'o: "Fix an ext4 metadata checksum regression introduced in v3.18-rc3" * tag 'ext4_for_linus_urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: jbd2: fix regression where we fail to initialize checksum seed when loading
2014-12-01jbd2: fix regression where we fail to initialize checksum seed when loadingDarrick J. Wong
When we're enabling journal features, we cannot use the predicate jbd2_journal_has_csum_v2or3() because we haven't yet set the sb feature flag fields! Moreover, we just finished loading the shash driver, so the test is unnecessary; calculate the seed always. Without this patch, we fail to initialize the checksum seed the first time we turn on journal_checksum, which means that all journal blocks written during that first mount are corrupt. Transactions written after the second mount will be fine, since the feature flag will be set in the journal superblock. xfstests generic/{034,321,322} are the regression tests. (This is important for 3.18.) Signed-off-by: Darrick J. Wong <darrick.wong@oracle.coM> Reported-by: Eric Whitney <enwlinux@gmail.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2014-12-02NFC: hci: Add support for NOTIFY_ALL_PIPE_CLEAREDChristophe Ricard
When switching from UICC to another, the CLF may signals to the Terminal Host that some existing pipe are cleared for future update. This notification needs to be "acked" by the Terminal Host with a ANY_OK message. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-12-02NFC: hci: Add open pipe command handlerChristophe Ricard
If our terminal connect with other host like UICC, it may create a pipe with us, the host controller will notify us new pipe created, after that UICC will open that pipe, if we don't handle that request, UICC may failed to continue initialize which may lead to card emulation feature failed to work Signed-off-by: Arron Wang <arron.wang@intel.com> Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-12-02NFC: st21nfcb: Improve ndlc commentChristophe Ricard
In ndlc_probe function we initialize timers. They are not started. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-12-02NFC: st21nfca: Rework st21nfca_hci_event_received to route event to relevent ↵Christophe Ricard
gate. As many event with the same id can come from several gates, it will be easier to manage each of them by gate. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-12-02NFC: nci: Add se_io NCI operandChristophe Ricard
se_io allows to send apdu over the CLF to the embedded Secure Element. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-12-02NFC: nci: Update nci_disable_se to run proprietary commands to disable a ↵Christophe Ricard
secure element Some NFC controller using NCI protocols may need a proprietary commands flow to disable a secure element Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-12-02NFC: nci: Update nci_enable_se to run proprietary commands to enable a ↵Christophe Ricard
secure element Some NFC controller using NCI protocols may need a proprietary commands flow to enable a secure element Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-12-02NFC: nci: Update nci_discover_se to run proprietary commands to discover all ↵Christophe Ricard
available secure element Some NFC controller using NCI protocols may need a proprietary commands flow to discover all available secure element Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-12-02NFC: nci: Fix sparse: symbol 'nci_get_prop_rf_protocol' was not declared.Christophe Ricard
Fix sparse warning introduced by commit: 9e87f9a9c4c4754508b2c2638fbde9e10c7a103b It was generating the following warning: net/nfc/nci/ntf.c:170:7: sparse: symbol 'nci_get_prop_rf_protocol' was not declared. Should it be static? Procedure to reproduce it: # apt-get install sparse git checkout 9e87f9a9c4c4754508b2c2638fbde9e10c7a103b make ARCH=x86_64 allmodconfig make C=1 CF=-D__CHECK_ENDIAN__ Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-12-02NFC: hci: Add se_io HCI operandChristophe Ricard
se_io allows to send apdu over the CLF to the embedded Secure Element. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-12-01PCI: tegra: Use physical range for I/O mappingThierry Reding
Commit 0b0b0893d49b ("of/pci: Fix the conversion of IO ranges into IO resources") changed how I/O resources are parsed from DT. Rather than containing the physical address of the I/O region, the addresses will now be in I/O address space. On Tegra the union of all ranges is used to expose a top-level memory- mapped resource for the PCI host bridge. This helps to make /proc/iomem more readable. Combining both of the above, the union would now include the I/O space region. This causes a regression on Tegra20, where the physical base address of the PCIe controller (and therefore of the union) is located at physical address 0x80000000. Since I/O space starts at 0, the union will now include all of system RAM which starts at 0x00000000. This commit fixes this by keeping two copies of the I/O range: one that represents the range in the CPU's physical address space, the other for the range in the I/O address space. This allows the translation setup within the driver to reuse the physical addresses. The code registering the I/O region with the PCI core uses both ranges to establish the mapping. Fixes: 0b0b0893d49b ("of/pci: Fix the conversion of IO ranges into IO resources") Reported-by: Marc Zyngier <marc.zyngier@arm.com> Tested-by: Marc Zyngier <marc.zyngier@arm.com> Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2014-12-02NFC: st21nfcb: Remove gpio_irq field in static and dts configurationChristophe Ricard
- phy->gpio_irq is never done out of the request resources. - irq_of_parse_and_map is already done in the i2c core so client->irq is already set when entering in st21nfcb_hci_i2c_of_request_resources - In case of static platform configuration client->irq can be set directly. - It simplifies the code a bit. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-12-02NFC: st21nfcb: Add of_st21nfcb_i2c_match to MODULE_DEVICE_TABLEChristophe Ricard
When CONFIG_OF is define add of_st21nfcb_i2c_match to MODULE_DEVICE_TABLE Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-12-02NFC: st21nfca: Remove gpio_irq field in static and dts configurationChristophe Ricard
- phy->gpio_irq is never done out of the request resources. - irq_of_parse_and_map is already done in the i2c core so client->irq is already set when entering in st21nfca_hci_i2c_of_request_resources - In case of static platform configuration client->irq can be set directly - It simplifies the code a bit. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-12-02NFC: st21nfca: Add of_st21nfca_i2c_match to MODULE_DEVICE_TABLEChristophe Ricard
When CONFIG_OF is define add of_st21nfca_i2c_match to MODULE_DEVICE_TABLE. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-12-01KEYS: request_key() should reget expired keys rather than give EKEYEXPIREDDavid Howells
Since the keyring facility can be viewed as a cache (at least in some applications), the local expiration time on the key should probably be viewed as a 'needs updating after this time' property rather than an absolute 'anyone now wanting to use this object is out of luck' property. Since request_key() is the main interface for the usage of keys, this should update or replace an expired key rather than issuing EKEYEXPIRED if the local expiration has been reached (ie. it should refresh the cache). For absolute conditions where refreshing the cache probably doesn't help, the key can be negatively instantiated using KEYCTL_REJECT_KEY with EKEYEXPIRED given as the error to issue. This will still cause request_key() to return EKEYEXPIRED as that was explicitly set. In the future, if the key type has an update op available, we might want to upcall with the expired key and allow the upcall to update it. We would pass a different operation name (the first column in /etc/request-key.conf) to the request-key program. request_key() returning EKEYEXPIRED is causing an NFS problem which Chuck Lever describes thusly: After about 10 minutes, my NFSv4 functional tests fail because the ownership of the test files goes to "-2". Looking at /proc/keys shows that the id_resolv keys that map to my test user ID have expired. The ownership problem persists until the expired keys are purged from the keyring, and fresh keys are obtained. I bisected the problem to 3.13 commit b2a4df200d57 ("KEYS: Expand the capacity of a keyring"). This commit inadvertantly changes the API contract of the internal function keyring_search_aux(). The root cause appears to be that b2a4df200d57 made "no state check" the default behavior. "No state check" means the keyring search iterator function skips checking the key's expiry timeout, and returns expired keys. request_key_and_link() depends on getting an -EAGAIN result code to know when to perform an upcall to refresh an expired key. This patch can be tested directly by: keyctl request2 user debug:fred a @s keyctl timeout %user:debug:fred 3 sleep 4 keyctl request2 user debug:fred a @s Without the patch, the last command gives error EKEYEXPIRED, but with the command it gives a new key. Reported-by: Carl Hetherington <cth@carlh.net> Reported-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Chuck Lever <chuck.lever@oracle.com>
2014-12-01KEYS: Simplify KEYRING_SEARCH_{NO,DO}_STATE_CHECK flagsDavid Howells
Simplify KEYRING_SEARCH_{NO,DO}_STATE_CHECK flags to be two variations of the same flag. They are effectively mutually exclusive and one or the other should be provided, but not both. Keyring cycle detection and key possession determination are the only things that set NO_STATE_CHECK, except that neither flag really does anything there because neither purpose makes use of the keyring_search_iterator() function, but rather provides their own. For cycle detection we definitely want to check inside of expired keyrings, just so that we don't create a cycle we can't get rid of. Revoked keyrings are cleared at revocation time and can't then be reused, so shouldn't be a problem either way. For possession determination, we *might* want to validate each keyring before searching it: do you possess a key that's hidden behind an expired or just plain inaccessible keyring? Currently, the answer is yes. Note that you cannot, however, possess a key behind a revoked keyring because they are cleared on revocation. keyring_search() sets DO_STATE_CHECK, which is correct. request_key_and_link() currently doesn't specify whether to check the key state or not - but it should set DO_STATE_CHECK. key_get_instantiation_authkey() also currently doesn't specify whether to check the key state or not - but it probably should also set DO_STATE_CHECK. Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Chuck Lever <chuck.lever@oracle.com>
2014-12-01KEYS: Fix the size of the key description passed to/from userspaceDavid Howells
When a key description argument is imported into the kernel from userspace, as happens in add_key(), request_key(), KEYCTL_JOIN_SESSION_KEYRING, KEYCTL_SEARCH, the description is copied into a buffer up to PAGE_SIZE in size. PAGE_SIZE, however, is a variable quantity, depending on the arch. Fix this at 4096 instead (ie. 4095 plus a NUL termination) and define a constant (KEY_MAX_DESC_SIZE) to this end. When reading the description back with KEYCTL_DESCRIBE, a PAGE_SIZE internal buffer is allocated into which the information and description will be rendered. This means that the description will get truncated if an extremely long description it has to be crammed into the buffer with the stringified information. There is no particular need to copy the description into the buffer, so just copy it directly to userspace in a separate operation. Reported-by: Christian Kastner <debian@kvr.at> Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Christian Kastner <debian@kvr.at>
2014-12-01wil6210: remove TODO wrt buffer alignmentVladimir Kondratiev
Hardware doesn't place any restrictions on the buffer alignment, consider this TODO resolved. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-12-01wil6210: reset flow updateVladimir Kondratiev
If card reset with firmware download executed, followed by reset with use of firmware from build in flash, firmware download indication remains in the hardware register. When running firmware download flow, the SW download indication is written by the driver to bit 0 in usage_6: wil_fw_load(), "S(RGF_USER_USAGE_6, 1);" This register, like all USER RGF, wasn't reset in SW reset flow. Therefore the driver must clear it on SW reset flow. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-12-01wil6210: Rate limit "ring full" error messageVladimir Kondratiev
In the wil_tx_ring, error message printed when tx attempted while vring has no space to accommodate all fragments of frame. Normally, such situation handled by stopping tx queue. But, if tx queue is by-passed (like pktgen does), this error will be triggered at high rate and dmesg will be flooded with this message. Whole system may become unstable and hang with no possible recover except power cycle. Rate-limit it to prevent dmesg flooding. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-12-01wil6210: fix warning in pointer arithmeticVladimir Kondratiev
In some compilation environments, result of pointer arithmetic interpreted as int while in others it is long int. Force conversion to long. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-12-01wil6210: configurable vring sizesVladimir Kondratiev
Allow to configure VRING size for both Rx and Tx via module parameters: rx_ring_order and tx_ring_order. Parameters are ring size orders, i.e. ring size calculated as 1 << order. Defaults for both Tx and Rx are order 9, i.e. size 512 Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-12-01wil6210: remove wil_to_pcie_dev()Vladimir Kondratiev
There is no need to obtain physical device through wil->pdev->dev path, as it is done by this macro. The same device already stored as wiphy's device, thus wil_to_dev() returns the same device as wil_to_pcie_dev() Remove unnecessary macros, this allows to drop dependency by pci.h in the firmware download code. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-12-01wil6210: fix recovery after scan timeoutVladimir Kondratiev
Scan timeout treated as indication for firmware error; and should be handled in the same way. Recovery state machine does not perform as designed because its state is not updated in case of scan timeout. Fix is to set recovery state machine into the proper state. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-12-01wil6210: add handling of RX HTRSH interruptVladimir Kondratiev
RX_HTRSH interrupt is handled in exactly the same manner as RX_DONE interrupt - fetching accumulated packets from RX ring. In addition there's a rate limitted warning message. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-12-01wil6210: propagate disconnect reasonVladimir Kondratiev
Propagate reason for the disconnect through the relevant call chains: - report to cfg80211 reason as reported by the firmware - provide to the firmware reason as requested by cfg80211 Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-12-01ath9k: do not access hardware on IRQs during resetFelix Fietkau
Instead of killing interrupts during reset when the first one happens, kill them before issuing the reset. This fixes an easy to reproduce crash with multiple cards sharing the same IRQ. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-12-01ath9k: set ATH_OP_INVALID before disabling hardwareFelix Fietkau
Closes another small IRQ handler race Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-12-01ath9k: prevent early IRQs from accessing hardwareFelix Fietkau
IRQs are suppressed if ah == NULL and ATH_OP_INVALID being set in common->op_flags. Close a short time window between those two. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-12-01ath5k: fix hardware queue index assignmentFelix Fietkau
Like with ath9k, ath5k queues also need to be ordered by priority. queue_info->tqi_subtype already contains the correct index, so use it instead of relying on the order of ath5k_hw_setup_tx_queue calls. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-12-01ath9k: fix BE/BK queue orderFelix Fietkau
Hardware queues are ordered by priority. Use queue index 0 for BK, which has lower priority than BE. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit (git 2.34.1) at 2025-09-14 15:46:59 +0000