| Age | Commit message (Collapse) | Author |
|---|
|
The mv_cesa driver currently expects the SRAM memory region to be passed
as a platform device resource.
This approach implies two drawbacks:
- the DT representation is wrong
- the only one that can access the SRAM is the crypto engine
The last point is particularly annoying in some cases: for example on
armada 370, a small region of the crypto SRAM is used to implement the
cpuidle, which means you would not be able to enable both cpuidle and the
CESA driver.
To address that problem, we explicitly define the SRAM device in the DT
and then reference the sram node from the crypto engine node.
Also note that the old way of retrieving the SRAM memory region is still
supported, or in other words, backward compatibility is preserved.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
On Dove platforms, the crypto engine requires a clock. Document this
clocks property in the mv_cesa bindings doc.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Merge the mvebu/drivers branch of the arm-soc tree which contains
just a single patch bfa1ce5f38938cc9e6c7f2d1011f88eba2b9e2b2 ("bus:
mvebu-mbus: add mv_mbus_dram_info_nooverlap()") that happens to be
a prerequisite of the new marvell/cesa crypto driver.
|
|
When building the kernel with 32-bit binutils built with support
only for the i386 target, we get the following warning:
arch/x86/kernel/head_32.S:66: Warning: shift count out of range (32 is not between 0 and 31)
The problem is that in that case, binutils' internal type
representation is 32-bit wide and the shift range overflows.
In order to fix this, manipulate the shift expression which
creates the 4GiB constant to not overflow the shift count.
Suggested-by: Michael Matz <matz@suse.de>
Reported-and-tested-by: Enrico Mioso <mrkiko.rs@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
When building the kernel with a bare-metal (ELF) toolchain, the -shared
option may not be passed down to collect2, resulting in silent corruption
of the vDSO image (in particular, the DYNAMIC section is omitted).
The effect of this corruption is that the dynamic linker fails to find
the vDSO symbols and libc is instead used for the syscalls that we
intended to optimise (e.g. gettimeofday). Functionally, there is no
issue as the sigreturn trampoline is still intact and located by the
kernel.
This patch fixes the problem by explicitly passing -shared to the linker
when building the vDSO.
Cc: <stable@vger.kernel.org>
Reported-by: Szabolcs Nagy <Szabolcs.Nagy@arm.com>
Reported-by: James Greenlaigh <james.greenhalgh@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Trivial fix that prevents to compile this pmc clock driver if h32mx clock is
present but smd clock isn't.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Fixes: bcc5fd49a0fd ("clk: at91: add a driver for the h32mx clock")
Cc: <stable@vger.kernel.org> # 3.18+
|
|
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
|
|
This patch renames __cpu_suspend to cpu_suspend so that it's aligned
with ARM32. It also removes the redundant wrapper created.
This is in preparation to implement generic PSCI system suspend using
the cpu_{suspend,resume} which now has the same interface on both ARM
and ARM64.
Cc: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Ashwin Chaugule <ashwin.chaugule@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
If nohz is disabled on the kernel command line the [hr]timer code
still calls wake_up_nohz_cpu() and tick_nohz_full_cpu(), a pretty
pointless exercise. Cache nohz_active in [hr]timer per cpu bases and
avoid the overhead.
Before:
48.10% hog [.] main
15.25% [kernel] [k] _raw_spin_lock_irqsave
9.76% [kernel] [k] _raw_spin_unlock_irqrestore
6.50% [kernel] [k] mod_timer
6.44% [kernel] [k] lock_timer_base.isra.38
3.87% [kernel] [k] detach_if_pending
3.80% [kernel] [k] del_timer
2.67% [kernel] [k] internal_add_timer
1.33% [kernel] [k] __internal_add_timer
0.73% [kernel] [k] timerfn
0.54% [kernel] [k] wake_up_nohz_cpu
After:
48.73% hog [.] main
15.36% [kernel] [k] _raw_spin_lock_irqsave
9.77% [kernel] [k] _raw_spin_unlock_irqrestore
6.61% [kernel] [k] lock_timer_base.isra.38
6.42% [kernel] [k] mod_timer
3.90% [kernel] [k] detach_if_pending
3.76% [kernel] [k] del_timer
2.41% [kernel] [k] internal_add_timer
1.39% [kernel] [k] __internal_add_timer
0.76% [kernel] [k] timerfn
We probably should have a cached value for nohz full in the per cpu
bases as well to avoid the cpumask check. The base cache line is hot
already, the cpumask not necessarily.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Joonwoo Park <joonwoop@codeaurora.org>
Cc: Wenbo Wang <wenbo.wang@memblaze.com>
Link: http://lkml.kernel.org/r/20150526224512.207378134@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Eric reported that the timer_migration sysctl is not really nice
performance wise as it needs to check at every timer insertion whether
the feature is enabled or not. Further the check does not live in the
timer code, so we have an extra function call which checks an extra
cache line to figure out that it is disabled.
We can do better and store that information in the per cpu (hr)timer
bases. I pondered to use a static key, but that's a nightmare to
update from the nohz code and the timer base cache line is hot anyway
when we select a timer base.
The old logic enabled the timer migration unconditionally if
CONFIG_NO_HZ was set even if nohz was disabled on the kernel command
line.
With this modification, we start off with migration disabled. The user
visible sysctl is still set to enabled. If the kernel switches to NOHZ
migration is enabled, if the user did not disable it via the sysctl
prior to the switch. If nohz=off is on the kernel command line,
migration stays disabled no matter what.
Before:
47.76% hog [.] main
14.84% [kernel] [k] _raw_spin_lock_irqsave
9.55% [kernel] [k] _raw_spin_unlock_irqrestore
6.71% [kernel] [k] mod_timer
6.24% [kernel] [k] lock_timer_base.isra.38
3.76% [kernel] [k] detach_if_pending
3.71% [kernel] [k] del_timer
2.50% [kernel] [k] internal_add_timer
1.51% [kernel] [k] get_nohz_timer_target
1.28% [kernel] [k] __internal_add_timer
0.78% [kernel] [k] timerfn
0.48% [kernel] [k] wake_up_nohz_cpu
After:
48.10% hog [.] main
15.25% [kernel] [k] _raw_spin_lock_irqsave
9.76% [kernel] [k] _raw_spin_unlock_irqrestore
6.50% [kernel] [k] mod_timer
6.44% [kernel] [k] lock_timer_base.isra.38
3.87% [kernel] [k] detach_if_pending
3.80% [kernel] [k] del_timer
2.67% [kernel] [k] internal_add_timer
1.33% [kernel] [k] __internal_add_timer
0.73% [kernel] [k] timerfn
0.54% [kernel] [k] wake_up_nohz_cpu
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Joonwoo Park <joonwoop@codeaurora.org>
Cc: Wenbo Wang <wenbo.wang@memblaze.com>
Link: http://lkml.kernel.org/r/20150526224512.127050787@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Simplify the handling of the flag storage for the timer statistics. No
intermediate storage anymore. Just hand over the flags field.
I left the printout of 'deferrable' for now because changing this
would be an ABI update and I have no idea how strong people feel about
that. OTOH, I wonder whether we should kill the whole timer stats
stuff because all of that information can be retrieved via ftrace/perf
as well.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Joonwoo Park <joonwoop@codeaurora.org>
Cc: Wenbo Wang <wenbo.wang@memblaze.com>
Link: http://lkml.kernel.org/r/20150526224512.046626248@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Instead of storing a pointer to the per cpu tvec_base we can simply
cache a CPU index in the timer_list and use that to get hold of the
correct per cpu tvec_base. This is only used in lock_timer_base() and
the slightly larger code is peanuts versus the spinlock operation and
the d-cache foot print of the timer wheel.
Aside of that this allows to get rid of following nuisances:
- boot_tvec_base
That statically allocated 4k bss data is just kept around so the
timer has a home when it gets statically initialized. It serves no
other purpose.
With the CPU index we assign the timer to CPU0 at static
initialization time and therefor can avoid the whole boot_tvec_base
dance. That also simplifies the init code, which just can use the
per cpu base.
Before:
text data bss dec hex filename
17491 9201 4160 30852 7884 ../build/kernel/time/timer.o
After:
text data bss dec hex filename
17440 9193 0 26633 6809 ../build/kernel/time/timer.o
- Overloading the base pointer with various flags
The CPU index has enough space to hold the flags (deferrable,
irqsafe) so we can get rid of the extra masking and bit fiddling
with the base pointer.
As a benefit we reduce the size of struct timer_list on 64 bit
machines. 4 - 8 bytes, a size reduction up to 15% per struct timer_list,
which is a real win as we have tons of them embedded in other structs.
This changes also the newly added deferrable printout of the timer
start trace point to capture and print all timer->flags, which allows
us to decode the target cpu of the timer as well.
We might have used bitfields for this, but that would change the
static initializers and the init function for no value to accomodate
big endian bitfields.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Joonwoo Park <joonwoop@codeaurora.org>
Cc: Wenbo Wang <wenbo.wang@memblaze.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Badhri Jagan Sridharan <Badhri@google.com>
Link: http://lkml.kernel.org/r/20150526224511.950084301@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
This reduces the size of struct tvec_base by 50% and results in
slightly smaller code as well.
Before:
struct tvec_base: size: 8256, cachelines: 129
text data bss dec hex filename
17698 13297 8256 39251 9953 ../build/kernel/time/timer.o
After:
struct tvec_base: 4160, cachelines: 65
text data bss dec hex filename
17491 9201 4160 30852 7884 ../build/kernel/time/timer.o
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Joonwoo Park <joonwoop@codeaurora.org>
Cc: Wenbo Wang <wenbo.wang@memblaze.com>
Link: http://lkml.kernel.org/r/20150526224511.854731214@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
The FIFO guarantee is only there if two timers are queued into the
same bucket at the same jiffie on the same cpu:
- The slack value depends on the delta between expiry and enqueue
time, so the resulting expiry time can be different for timers
which are queued in different jiffies.
- Timers which are queued into the secondary array end up after a
later queued timer which was queued into the primary array due to
cascading.
- Timers can end up on different cpus due to the NOHZ target moving
around. Obviously there is no guarantee of expiry ordering between
cpus.
So anything which relies on FIFO behaviour of the timer wheel is
broken already.
This is a preparatory patch for converting the timer wheel to hlist
which reduces the memory foot print of the wheel by 50%.
It's a seperate patch so any (unlikely to happen) regression caused by
this can be identified clearly.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Joonwoo Park <joonwoop@codeaurora.org>
Cc: Wenbo Wang <wenbo.wang@memblaze.com>
Cc: George Spelvin <linux@horizon.com>
Link: http://lkml.kernel.org/r/20150526224511.757520403@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
catchup_timer_jiffies() has been applied blindly to several functions
without looking for possible better ways to do it.
1) internal_add_timer()
Move the update to base->all_timers before we actually insert the
timer into the wheel.
2) detach_if_pending()
Again the update to base->all_timers allows us to explicitely do
the timer_jiffies update in place, if this was the last timer which
got removed.
3) __run_timers()
We only check on entry, which is silly, because base->timer_jiffies
can be behind - especially on NOHZ kernels - and if there is a
single deferrable timer somewhere between base->timer_jiffies and
jiffies we expire it and then loop until base->timer_jiffies ==
jiffies.
Move it into the loop.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Joonwoo Park <joonwoop@codeaurora.org>
Cc: Wenbo Wang <wenbo.wang@memblaze.com>
Link: http://lkml.kernel.org/r/20150526224511.662994644@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Fix the PERIPHERAL_MAX_SHIFT definition (3 instead of 4) and adapt the
round_rate and set_rate logic accordingly.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reported-by: "Wu, Songjun" <Songjun.Wu@atmel.com>
|
|
The PLL impose a certain input range to work correctly, but it appears that
this input range does not apply on the input clock (or parent clock) but
on the input clock after it has passed the PLL divisor.
Fix the implementation accordingly.
Cc: <stable@vger.kernel.org> # v3.14+
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reported-by: Jonas Andersson <jonas@microbit.se>
|
|
This patch allows the block allocation code to retain the buffers
for the resource groups so they don't need to be re-read from buffer
cache with every request. This is a performance improvement that's
especially noticeable when resource groups are very large. For
example, with 2GB resource groups and 4K blocks, there can be 33
blocks for every resource group. This patch allows those 33 buffers
to be kept around and not read in and thrown away with every
operation. The buffers are released when the resource group is
either synced or invalidated.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Steven Whitehouse <swhiteho@redhat.com>
Reviewed-by: Benjamin Marzinski <bmarzins@redhat.com>
|
|
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
These have been register compatible so far. However ARCv2 mandates
different pt_regs layout (due to h/w auto save). To keep pt_regs same
for both, we start by removing the assumption - used mainly for block
copies between the 2 structs in signal handling and ptrace
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
Previously this macro was overloaded with stack switching, saving SP at right
slot in pt_regs, saving/setup of r25 and setting SP baseline to where
pt_regs->sp is saved (vs. bottom of pt_regs)
Now it only does SP switch, and leaves SP pointing to bottom of pt_regs.
r25 saving is no longer done here to allow for future reordering of
regfile in pt_regs w/o touching this macro
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
Returning from pure kernel mode and exception mode use the same code
anyways. Remove one the duplicate blocks
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
Elide the need to re-read ECR in Trap handler by ensuring that
EXCEPTION_PROLOGUE does that at the very end just before returning
to Trap handler
ARCv2 EXCEPTION_PROLOGUE already did that, so same for ARcompact and the
common trap handler adjusted to use cached ECR
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
This fixes the possible link/relo errors, since restore_regs will be
provided by ISA code, but called from ARC common code.
The .L prefix reassures binutils that it will be in same compilation
unit.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
-EXCEPTION_EPILOGUE introduced
-EXCEPTION_PROLOGUE now also includes reg file saving
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
-common'ize macros for level 1 and level 2 interrupts
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
- Remove the ifdef'ery and write distinct versions for each mmu ver even
if there is some code duplication
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
That is because __after_dc_op() already reads it for status check, so it
is better anyways to use that "newer" value.
Also reduces the clutter in callers for passing from/to these routines.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
As DW Mobile Storage databook says it's required to use "Hold Register"
if card is enumerated in SDR12 or SDR25 modes.
It means we need to act in the same way as in Altera's Socfpga
implementation - set "use hold reg" bit in commad.
Note that for upstream proper solution would be to remove
dw_mci_pltfm_prepare_command() at all and set the bit right in
dw_mci_prepare_command() for all platforms.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
Route all MB originated traffic to DDR Port 1 and keep Port 0 for CPU
traffic only
Basic system parameters
--------------------------------------------------------------------------------------
Host OS Description Mhz tlb cache mem scal
pages line par load
bytes
----------------- ------------- --------------------------------------- ---- ----- ----- ------ ----
axs101-sd-2-new-f Linux 3.13.0+ axs101-sd-2-new-fw-old-img-rerun 739 8 32 1.1100 1
axs101-sd-3-arc-3 Linux 3.13.9+ axs101-sd-3-arc-3.13-tip-regression 735 8 32 1.1000 1
axs101-sd-9-diffe Linux 3.13.11 axs101-sd-9-different-tweak 740 8 32 1.0000 1
Processor, Processes - times in microseconds - smaller is better
------------------------------------------------------------------------------
Host OS Mhz null null open slct sig sig fork exec sh
call I/O stat clos TCP inst hndl proc proc proc
--------- ------------- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ----
axs101-sd Linux 3.13.0+ 739 0.50 0.88 5.38 14.6 34.1 0.92 5.18 2135 6555 12.K
axs101-sd Linux 3.13.9+ 735 0.50 0.90 5.89 19.2 81.4 0.94 4.08 2560 8559 15.K
axs101-sd Linux 3.13.11 740 0.50 0.88 4.45 17.8 34.4 0.94 3.25 2052 6493 12.K
^^^^ ^^^^
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
Earlycon calculates UART clock as "BASE_BAUD * 16". In case of ARC
"BASE_BAUD" is calculated dynamically in runtime, basically it is an
alias to arc_early_base_baud(), which in turn just does
"arc_base_baud/16".
8250 UART on AXS/SDP board uses 33.3MHz clock source which is set in
"arc_base_baud" with this change.
Additional compatibility string "snps,arc-sdp" is introduced as well
because there're different flavours of AXS boards but they all share the
same motherboard and so it's possible to re-use the same code for
motherbord even if CPU daughterboard changes.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
The AXS10x platforms consist of a mainboard with peripherals,
on which several daughter cards can be placed. The daughter cards
typically contain a CPU and memory.
Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
Currently, it doesn't invoke the callback but continues to unwind
Also while at it - simplify the code a bit
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
Directly return the result of perf_pmu_register() in
arc_pmu_device_probe() instead of assigning and returning variable ret.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
static arc_pmu in the arch/arc/kernel/perf_event.c is not initialized as
it's shadowed by a local variable of the same name in the
arc_pmu_device_probe.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Fixes: 03c94fcf954d "ARC: perf: make @arc_pmu static global"
CC: <stable@vger.kernel.org> # 4.1
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
* Remove remanants of legacy ARC FPGA platforms (AA4, ML509...)
* Only nsim simulation platform is left, rename platform accordingly
* AA4 DT stuff is compatible with nsim for ARC700 so rename it too
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
With ISS long unsupported, no point in having extension based on it
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
