summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-01-31drm/nouveau/fence/g84-: protect against concurrent access to semaphore buffersBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2017-01-31Drivers: hv: vmbus: finally fix hv_need_to_signal_on_read()Dexuan Cui
Commit a389fcfd2cb5 ("Drivers: hv: vmbus: Fix signaling logic in hv_need_to_signal_on_read()") added the proper mb(), but removed the test "prev_write_sz < pending_sz" when making the signal decision. As a result, the guest can signal the host unnecessarily, and then the host can throttle the guest because the host thinks the guest is buggy or malicious; finally the user running stress test can perceive intermittent freeze of the guest. This patch brings back the test, and properly handles the in-place consumption APIs used by NetVSC (see get_next_pkt_raw(), put_pkt_raw() and commit_rd_index()). Fixes: a389fcfd2cb5 ("Drivers: hv: vmbus: Fix signaling logic in hv_need_to_signal_on_read()") Signed-off-by: Dexuan Cui <decui@microsoft.com> Reported-by: Rolf Neugebauer <rolf.neugebauer@docker.com> Tested-by: Rolf Neugebauer <rolf.neugebauer@docker.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: <stable@vger.kernel.org> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-31Input: synaptics-rmi4 - fix reversed conditions in enable/disable_irq_wakeChristophe JAILLET
These tests are reversed. A warning should be displayed if an error is returned, not on success. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-31PM / devfreq: Modify the device name as devfreq(X) for sysfsChanwoo Choi
This patch modifies the device name as devfreq(X) for sysfs by using the 'devfreq' prefix word instead of separate device name. On user-space aspect, user would find the some devfreq drvier with 'devfreq(X)' pattern. So, this patch modify the device name as following: - /sys/class/devfreq/[non-standard device name] -> /sys/class/devfreq/devfreq(X) Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2017-01-31PM / devfreq: Simplify the sysfs name of devfreq-event deviceChanwoo Choi
This patch just removes '.' character from the sysfs name of devfreq-event device as following. Usually, the subsystem uses the similiar naming style such as {framework name}{Number}. - old : /sys/class/devfreq-event/event.(X) - new : /sys/class/devfreq-event/event(X) And this patch initializes the value of 'event_no' with -1 in order to remove the unneeded operation (-1) when calling the atomic_inc_return(&event_no). Lastly, this patch adds the ABI document for devfreq-event class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2017-01-31Merge branch 'x86/urgent' into x86/microcode, to resolve conflictsIngo Molnar
Conflicts: arch/x86/kernel/cpu/microcode/amd.c arch/x86/kernel/cpu/microcode/core.c Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-31x86/mm: Remove CONFIG_DEBUG_NX_TESTKees Cook
CONFIG_DEBUG_NX_TEST has been broken since CONFIG_DEBUG_SET_MODULE_RONX=y was added in v2.6.37 via: 84e1c6bb38eb ("x86: Add RO/NX protection for loadable kernel modules") since the exception table was then made read-only. Additionally, the manually constructed extables were never fixed when relative extables were introduced in v3.5 via: 706276543b69 ("x86, extable: Switch to relative exception table entries") However, relative extables won't work for test_nx.c, since test instruction memory areas may be more than INT_MAX away from an executable fixup (e.g. stack and heap too far away from executable memory with the fixup). Since clearly no one has been using this code for a while now, and similar tests exist in LKDTM, this should just be removed entirely. Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jinbum Park <jinb.park7@gmail.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20170131003711.GA74048@beast Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-31rtlwifi: rtl8192ce: Fix loading of incorrect firmwareJurij Smakov
In commit cf4747d7535a ("rtlwifi: Fix regression caused by commit d86e64768859, an error in the edit results in the wrong firmware being loaded for some models of the RTL8188/8192CE. In this condition, the connection suffered from high ping latency, slow transfer rates, and required higher signal strengths to work at all See https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=853073, https://bugzilla.opensuse.org/show_bug.cgi?id=1017471, and https://github.com/lwfinger/rtlwifi_new/issues/203 for descriptions of the problems. This patch fixes all of those problems. Fixes: cf4747d7535a ("rtlwifi: Fix regression caused by commit d86e64768859") Signed-off-by: Jurij Smakov <jurij@wooyd.org> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> # 4.9+ Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-01-31PM / devfreq: Remove unnecessary separate _remove_devfreq()Chanwoo Choi
The _remove_devfreq() releases the all resources of the devfreq device. This function is only called in the devfreq_dev_release(). For that reason, the devfreq core doesn't need to leave the _remove_devfreq() separately. This patch releases the all resources in the devfreq_dev_release() and then removes the _remove_devfreq(). Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2017-01-31PM / devfreq: Fix wrong trans_stat of passive devfreq deviceChanwoo Choi
Until now, the trans_stat information of passive devfreq is not updated. This patch updates the trans_stat information after setting the target frequency of passive devfreq device. Fixes: 996133119f57 ("PM / devfreq: Add new passive governor") Cc: stable@vger.kernel.org Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2017-01-31PM / devfreq: Fix available_governor sysfsChanwoo Choi
The devfreq using passive governor is not able to change the governor. So, the user can not change the governor through 'available_governor' sysfs entry. Also, the devfreq which don't use the passive governor is not able to change to 'passive' governor on the fly. Fixes: 996133119f57 ("PM / devfreq: Add new passive governor") Cc: stable@vger.kernel.org Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2017-01-31Merge branch 'for-mingo' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu Pull RCU changes from Paul E. McKenney: - Dynticks updates, consolidating open-coded counter accesses into a well-defined API - SRCU updates: Simplify algorithm, add formal verification - Documentation updates - Miscellaneous fixes - Torture-test updates Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-30Merge tag 'at91-ab-4.10-soc' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into fixes AT91 SoC fixes for 4.10: - change email addresses for Nicolas and Ludovic following the Microchip-Atmel merger * tag 'at91-ab-4.10-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: MAINTAINERS: change email address from atmel to microchip MAINTAINERS: at91: change email address Signed-off-by: Olof Johansson <olof@lixom.net>
2017-01-31PM / devfreq: exynos-ppmu: Show the registred device for ppmu deviceChanwoo Choi
This patch just adds the simple log to show the PPMU device's registration during the kernel booting. Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Javier Martinez Canillas <javier@osg.samsung.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2017-01-31PM / devfreq: Fix the wrong description for userspace governorChanwoo Choi
This patch fixes the wrong description of governor_userspace.c and removes the unneeded blank line. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2017-01-31PM / devfreq: Fix the checkpatch warningsChanwoo Choi
This patch just fixes the checkpatch warnings. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2017-01-31PM / devfreq: exynos-bus: Print the real clock rate of busChanwoo Choi
This patch shows the real clock rate after calling clk_set_rate() to debug it. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2017-01-31PM / devfreq: exynos-ppmu: Use the regmap interface to handle the registersChanwoo Choi
This patch uses the regmap interface to read and write the registers for exynos PPMU device instead of the legacy memory map functions. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2017-01-31PM / devfreq: exynos-bus: Add the detailed correlation for Exynos5433Chanwoo Choi
This patch adds the detailed corrleation between sub-blocks and VDD_INT power line for Exynos5433. VDD_INT provided the power source to INT (Internal) block. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2017-01-31PM / devfreq: Don't delete sysfs group twiceChris Diamand
The 'userspace' governor adds a sysfs entry, which is removed when the governor is changed, or the devfreq device is released. However, when the latter occurs via device_unregister(), device_del() is called first, which removes the sysfs entries recursively and deletes the kobject. This means we get an Oops when the governor calls sysfs_remove_group() on the deleted kobject. Fix this by only doing the call when kobj *hasn't* been kobject_del()'d. Note that we can't just remove the call to sysfs_remove_group() entirely - it's needed for when the governor is changed to one which doesn't need a sysfs entry. Signed-off-by: Chris Diamand <chris.diamand@arm.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2017-01-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds
Pull sparc fixes from David Miller: "Several small bug fixes and tidies, along with a fix for non-resumable memory errors triggered by userspace" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc64: Handle PIO & MEM non-resumable errors. sparc64: Zero pages on allocation for mondo and error queues. sparc: Fixed typo in sstate.c. Replaced panicing with panicking sparc: use symbolic names for tsb indexing
2017-01-30Merge branch 'sparc64-non-resumable-user-error-recovery'David S. Miller
Liam R. Howlett says: ==================== sparc64: Recover from userspace non-resumable PIO & MEM errors A non-resumable error from userspace is able to cause a kernel panic or trap loop due to the setup and handling of the queued traps once in the kernel. This patch series addresses both of these issues. The queues are fixed by simply zeroing the memory before use. PIO errors from userspace will result in a SIGBUS being sent to the user process. The MEM errors form userspace will result in a SIGKILL and also cause the offending pages to be claimed so they are no longer used in future tasks. SIGKILL is used to ensure that the process does not try to coredump and result in an attempt to read the memory again from within kernel space. Although there is a HV call to scrub the memory (mem_scrub), there is no easy way to guarantee that the real memory address(es) are not used by other tasks. Clearing the error with mem_scrub would zero the memory and cause the other processes to proceed with bad data. The handling of other non-resumable errors remain unchanged and will cause a panic. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30sparc64: Handle PIO & MEM non-resumable errors.Liam R. Howlett
User processes trying to access an invalid memory address via PIO will receive a SIGBUS signal instead of causing a panic. Memory errors will receive a SIGKILL since a SIGBUS may result in a coredump which may attempt to repeat the faulting access. Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30sparc64: Zero pages on allocation for mondo and error queues.Liam R. Howlett
Error queues use a non-zero first word to detect if the queues are full. Using pages that have not been zeroed may result in false positive overflow events. These queues are set up once during boot so zeroing all mondo and error queue pages is safe. Note that the false positive overflow does not always occur because the page allocation for these queues is so early in the boot cycle that higher number CPUs get fresh pages. It is only when traps are serviced with lower number CPUs who were given already used pages that this issue is exposed. Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30net/sched: cls_flower: Correct matching on ICMPv6 codeSimon Horman
When matching on the ICMPv6 code ICMPV6_CODE rather than ICMPV4_CODE attributes should be used. This corrects what appears to be a typo. Sample usage: tc qdisc add dev eth0 ingress tc filter add dev eth0 protocol ipv6 parent ffff: flower \ indev eth0 ip_proto icmpv6 type 128 code 0 action drop Without this change the code parameter above is effectively ignored. Fixes: 7b684884fbfa ("net/sched: cls_flower: Support matching on ICMP type and code") Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30Merge tag 'linux-can-fixes-for-4.10-20170130' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2017-01-30 this is a pull request of one patch. The patch is by Oliver Hartkopp and fixes the hrtimer/tasklet termination in bcm op removal. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30Merge tag 'rtc-4.10-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC fix from Alexandre Belloni: "A single fix for this cycle. It is worth taking it for 4.10 so that distributions will not have CONFIG_RTC_DRV_JZ4740 switching from m to y in their config. Summary: - Allow jz4740 to build as a module again by using kernel_halt()" * tag 'rtc-4.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: rtc: jz4740: make the driver buildable as a module again
2017-01-30MAINTAINERS: change email address from atmel to microchipLudovic Desroches
Use microchip email address instead of old atmel one. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-01-30MAINTAINERS: at91: change email addressNicolas Ferre
Following the Microchip / Atmel merger and the unification of internal IT, it's more convenient for me to swith to the microchip.com address. Change all my entries to reflect this. Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-01-30ipv6: Paritially checksum full MTU framesVlad Yasevich
IPv6 will mark data that is smaller that mtu - headersize as CHECKSUM_PARTIAL, but if the data will completely fill the mtu, the packet checksum will be computed in software instead. Extend the conditional to include the data that fills the mtu as well. Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30net/mlx4_core: Avoid command timeouts during VF driver device shutdownJack Morgenstein
Some Hypervisors detach VFs from VMs by instantly causing an FLR event to be generated for a VF. In the mlx4 case, this will cause that VF's comm channel to be disabled before the VM has an opportunity to invoke the VF device's "shutdown" method. The result is that the VF driver on the VM will experience a command timeout during the shutdown process when the Hypervisor does not deliver a command-completion event to the VM. To avoid FW command timeouts on the VM when the driver's shutdown method is invoked, we detect the absence of the VF's comm channel at the very start of the shutdown process. If the comm-channel has already been disabled, we cause all FW commands during the device shutdown process to immediately return success (and thus avoid all command timeouts). Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30Merge tag 'mlx5-fixes-2017-01-27' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-fixes-2017-01-27 A couple of mlx5 core and ethernet driver fixes. From Or, A couple of error return values and error handling fixes. From Hadar, Support TC encapsulation offloads even when the mlx5e uplink device is stacked under an upper device. From Gal, Two patches to fix RSS hash modifications via ethtool. From Moshe, Added a needed ets capability check. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30Merge tag 'wireless-drivers-for-davem-2017-01-29' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 4.10 Most important here are fixes to two iwlwifi crashes, but there's also a firmware naming fix for iwlwifi and a revert of an older bcma patch. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30tools headers: Sync {tools/,}arch/powerpc/include/uapi/asm/kvm.h, ↵Ingo Molnar
{tools/,}arch/x86/include/asm/cpufeatures.h and {tools/,}arch/arm/include/uapi/asm/kvm.h The following upstream headers were updated: - The x86 cpufeatures.h file picked up a couple of new feature entries - The PowerPC and ARM KVM headers picked up new features None of which requires changes to perf tooling, so refresh the tooling copy. Solves these build time warnings: Warning: arch/x86/include/asm/cpufeatures.h differs from kernel Warning: arch/powerpc/include/uapi/asm/kvm.h differs from kernel Warning: arch/arm/include/uapi/asm/kvm.h differs from kernel Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20170130081131.GA8322@gmail.com [ resync tools/arch/x86/include/asm/cpufeatures.h ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-01-30gianfar: synchronize DMA API usage by free_skb_rx_queue w/ gfar_new_pageArseny Solokha
In spite of switching to paged allocation of Rx buffers, the driver still called dma_unmap_single() in the Rx queues tear-down path. The DMA region unmapping code in free_skb_rx_queue() basically predates the introduction of paged allocation to the driver. While being refactored, it apparently hasn't reflected the change in the DMA API usage by its counterpart gfar_new_page(). As a result, setting an interface to the DOWN state now yields the following: # ip link set eth2 down fsl-gianfar ffe24000.ethernet: DMA-API: device driver frees DMA memory with wrong function [device address=0x000000001ecd0000] [size=40] ------------[ cut here ]------------ WARNING: CPU: 1 PID: 189 at lib/dma-debug.c:1123 check_unmap+0x8e0/0xa28 CPU: 1 PID: 189 Comm: ip Tainted: G O 4.9.5 #1 task: dee73400 task.stack: dede2000 NIP: c02101e8 LR: c02101e8 CTR: c0260d74 REGS: dede3bb0 TRAP: 0700 Tainted: G O (4.9.5) MSR: 00021000 <CE,ME> CR: 28002222 XER: 00000000 GPR00: c02101e8 dede3c60 dee73400 000000b6 dfbd033c dfbd36c4 1f622000 dede2000 GPR08: 00000007 c05b1634 1f622000 00000000 22002484 100a9904 00000000 00000000 GPR16: 00000000 db4c849c 00000002 db4c8480 00000001 df142240 db4c84bc 00000000 GPR24: c0706148 c0700000 00029000 c07552e8 c07323b4 dede3cb8 c07605e0 db535540 NIP [c02101e8] check_unmap+0x8e0/0xa28 LR [c02101e8] check_unmap+0x8e0/0xa28 Call Trace: [dede3c60] [c02101e8] check_unmap+0x8e0/0xa28 (unreliable) [dede3cb0] [c02103b8] debug_dma_unmap_page+0x88/0x9c [dede3d30] [c02dffbc] free_skb_resources+0x2c4/0x404 [dede3d80] [c02e39b4] gfar_close+0x24/0xc8 [dede3da0] [c0361550] __dev_close_many+0xa0/0xf8 [dede3dd0] [c03616f0] __dev_close+0x2c/0x4c [dede3df0] [c036b1b8] __dev_change_flags+0xa0/0x174 [dede3e10] [c036b2ac] dev_change_flags+0x20/0x60 [dede3e30] [c03e130c] devinet_ioctl+0x540/0x824 [dede3e90] [c0347dcc] sock_ioctl+0x134/0x298 [dede3eb0] [c0111814] do_vfs_ioctl+0xac/0x854 [dede3f20] [c0111ffc] SyS_ioctl+0x40/0x74 [dede3f40] [c000f290] ret_from_syscall+0x0/0x3c --- interrupt: c01 at 0xff45da0 LR = 0xff45cd0 Instruction dump: 811d001c 7c66482e 813d0020 9061000c 807f000c 5463103a 7cc6182e 3c60c052 386309ac 90c10008 4cc63182 4826b845 <0fe00000> 4bfffa60 3c80c052 388402c4 ---[ end trace 695ae6d7ac1d0c47 ]--- Mapped at: [<c02e22a8>] gfar_alloc_rx_buffs+0x178/0x248 [<c02e3ef0>] startup_gfar+0x368/0x570 [<c036aeb4>] __dev_open+0xdc/0x150 [<c036b1b8>] __dev_change_flags+0xa0/0x174 [<c036b2ac>] dev_change_flags+0x20/0x60 Even though the issue was discovered in 4.9 kernel, the code in question is identical in the current net and net-next trees. Fixes: 75354148ce69 ("gianfar: Add paged allocation and Rx S/G") Signed-off-by: Arseny Solokha <asolokha@kb.kras.ru> Acked-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30net: ethtool: add support for 2500BaseT and 5000BaseT link modesPavel Belous
This patch introduce support for 2500BaseT and 5000BaseT link modes. These modes are included in the new IEEE 802.3bz standard. Signed-off-by: Pavel Belous <pavel.s.belous@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30iommu/dma: Implement PCI allocation optimisationRobin Murphy
Whilst PCI devices may have 64-bit DMA masks, they still benefit from using 32-bit addresses wherever possible in order to avoid DAC (PCI) or longer address packets (PCIe), which may incur a performance overhead. Implement the same optimisation as other allocators by trying to get a 32-bit address first, only falling back to the full mask if that fails. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-01-30iommu/dma: Stop getting dma_32bit_pfn wrongRobin Murphy
iommu_dma_init_domain() was originally written under the misconception that dma_32bit_pfn represented some sort of size limit for IOVA domains. Since the truth is almost the exact opposite of that, rework the logic and comments to reflect its real purpose of optimising lookups when allocating from a subset of the available 64-bit space. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-01-30Merge branch 'iommu/iommu-priv' of ↵Joerg Roedel
git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into arm/core
2017-01-30Merge branch 'for-joerg/arm-smmu/updates' of ↵Joerg Roedel
git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into arm/smmu
2017-01-30Merge branch 'iommu/guest-msi' of ↵Joerg Roedel
git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into arm/core
2017-01-30pinctrl: baytrail: Add missing spinlock usage in byt_gpio_irq_handlerAlexander Stein
According to VLI64 Intel Atom E3800 Specification Update (#329901) concurrent read accesses may result in returning 0xffffffff and write accesses may be dropped silently. To workaround all accesses must be protected by locks. Cc: stable@vger.kernel.org Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-30pinctrl: baytrail: Debounce register is one per communityAndy Shevchenko
Debounce value is set globally per community. Otherwise user will easily get a kernel crash when they start using the feature: BUG: unable to handle kernel paging request at ffffc900003be000 IP: byt_gpio_dbg_show+0xa9/0x430 Make it clear in byt_gpio_reg(). Note that this fix just prevents kernel to crash, but doesn't make any difference to the existing logic. It means the last caller will win the trade and debounce value will be configured accordingly. The actual logic fix needs to be thought about and it's not as important as crash fix. That's why the latter goes separately and right now. Fixes: 658b476c742f ("pinctrl: baytrail: Add debounce configuration") Cc: Cristina Ciocan <cristina.ciocan@intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-30pinctrl: baytrail: Rectify debounce support (part 2)Andy Shevchenko
The commit 04ff5a095d66 ("pinctrl: baytrail: Rectify debounce support") almost fixes the logic of debuonce but missed couple of things, i.e. typo in mask when disabling debounce and lack of enabling it back. This patch addresses above issues. Reported-by: Jean Delvare <jdelvare@suse.de> Fixes: 04ff5a095d66 ("pinctrl: baytrail: Rectify debounce support") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-30x86/mm/cpa: Avoid wbinvd() for PREEMPTJohn Ogness
Although wbinvd() is faster than flushing many individual pages, it blocks the memory bus for "long" periods of time (>100us), thus directly causing unusually large latencies on all CPUs, regardless of any CPU isolation features that may be active. This is an unpriviledged operatation as it is exposed to user space via the graphics subsystem. For 1024 pages, flushing those pages individually can take up to 2200us, but the task remains fully preemptible during that time. Signed-off-by: John Ogness <john.ogness@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: linux-rt-users <linux-rt-users@vger.kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-01-30irqdomain: Avoid activating interrupts more than onceMarc Zyngier
Since commit f3b0946d629c ("genirq/msi: Make sure PCI MSIs are activated early"), we can end-up activating a PCI/MSI twice (once at allocation time, and once at startup time). This is normally of no consequences, except that there is some HW out there that may misbehave if activate is used more than once (the GICv3 ITS, for example, uses the activate callback to issue the MAPVI command, and the architecture spec says that "If there is an existing mapping for the EventID-DeviceID combination, behavior is UNPREDICTABLE"). While this could be worked around in each individual driver, it may make more sense to tackle the issue at the core level. In order to avoid getting in that situation, let's have a per-interrupt flag to remember if we have already activated that interrupt or not. Fixes: f3b0946d629c ("genirq/msi: Make sure PCI MSIs are activated early") Reported-and-tested-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1484668848-24361-1-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-01-30[media] cec: fix wrong last_la determinationHans Verkuil
Due to an incorrect condition the last_la used for the initial attempt at claiming a logical address could be wrong. The last_la wasn't converted to a mask when ANDing with type2mask, so that test was broken. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-01-30[media] cec-intro.rst: mention the v4l-utils package and CEC utilitiesHans Verkuil
Mention where to find the CEC utilities. Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-01-30[media] cec rst: remove "This API is not yet finalized" noticeHans Verkuil
The API is now finalized, so this notice should be dropped. Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-01-30ARM: 8643/3: arm/ptrace: Preserve previous registers for short regset writeDave Martin
Ensure that if userspace supplies insufficient data to PTRACE_SETREGSET to fill all the registers, the thread's old registers are preserved. Cc: <stable@vger.kernel.org> # 3.0.x- Fixes: 5be6f62b0059 ("ARM: 6883/1: ptrace: Migrate to regsets framework") Signed-off-by: Dave Martin <Dave.Martin@arm.com> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit (git 2.34.1) at 2025-09-17 05:30:31 +0000