| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs netfs updates from Christian Brauner:
"This contains read performance improvements and support for monolithic
single-blob objects that have to be read/written as such (e.g. AFS
directory contents). The implementation of the two parts is interwoven
as each makes the other possible.
- Read performance improvements
The read performance improvements are intended to speed up some
loss of performance detected in cifs and to a lesser extend in afs.
The problem is that we queue too many work items during the
collection of read results: each individual subrequest is collected
by its own work item, and then they have to interact with each
other when a series of subrequests don't exactly align with the
pattern of folios that are being read by the overall request.
Whilst the processing of the pages covered by individual
subrequests as they complete potentially allows folios to be woken
in parallel and with minimum delay, it can shuffle wakeups for
sequential reads out of order - and that is the most common I/O
pattern.
The final assessment and cleanup of an operation is then held up
until the last I/O completes - and for a synchronous sequential
operation, this means the bouncing around of work items just adds
latency.
Two changes have been made to make this work:
(1) All collection is now done in a single "work item" that works
progressively through the subrequests as they complete (and
also dispatches retries as necessary).
(2) For readahead and AIO, this work item be done on a workqueue
and can run in parallel with the ultimate consumer of the data;
for synchronous direct or unbuffered reads, the collection is
run in the application thread and not offloaded.
Functions such as smb2_readv_callback() then just tell netfslib
that the subrequest has terminated; netfslib does a minimal bit of
processing on the spot - stat counting and tracing mostly - and
then queues/wakes up the worker. This simplifies the logic as the
collector just walks sequentially through the subrequests as they
complete and walks through the folios, if buffered, unlocking them
as it goes. It also keeps to a minimum the amount of latency
injected into the filesystem's low-level I/O handling
The way netfs supports filesystems using the deprecated
PG_private_2 flag is changed: folios are flagged and added to a
write request as they complete and that takes care of scheduling
the writes to the cache. The originating read request can then just
unlock the pages whatever happens.
- Single-blob object support
Single-blob objects are files for which the content of the file
must be read from or written to the server in a single operation
because reading them in parts may yield inconsistent results. AFS
directories are an example of this as there exists the possibility
that the contents are generated on the fly and would differ between
reads or might change due to third party interference.
Such objects will be written to and retrieved from the cache if one
is present, though we allow/may need to propose multiple
subrequests to do so. The important part is that read from/write to
the *server* is monolithic.
Single blob reading is, for the moment, fully synchronous and does
result collection in the application thread and, also for the
moment, the API is supplied the buffer in the form of a folio_queue
chain rather than using the pagecache.
- Related afs changes
This series makes a number of changes to the kafs filesystem,
primarily in the area of directory handling:
- AFS's FetchData RPC reply processing is made partially
asynchronous which allows the netfs_io_request's outstanding
operation counter to be removed as part of reducing the
collection to a single work item.
- Directory and symlink reading are plumbed through netfslib using
the single-blob object API and are now cacheable with fscache.
This also allows the afs_read struct to be eliminated and
netfs_io_subrequest to be used directly instead.
- Directory and symlink content are now stored in a folio_queue
buffer rather than in the pagecache. This means we don't require
the RCU read lock and xarray iteration to access it, and folios
won't randomly disappear under us because the VM wants them
back.
- The vnode operation lock is changed from a mutex struct to a
private lock implementation. The problem is that the lock now
needs to be dropped in a separate thread and mutexes don't
permit that.
- When a new directory or symlink is created, we now initialise it
locally and mark it valid rather than downloading it (we know
what it's likely to look like).
- We now use the in-directory hashtable to reduce the number of
entries we need to scan when doing a lookup. The edit routines
have to maintain the hash chains.
- Cancellation (e.g. by signal) of an async call after the
rxrpc_call has been set up is now offloaded to the worker thread
as there will be a notification from rxrpc upon completion. This
avoids a double cleanup.
- A "rolling buffer" implementation is created to abstract out the
two separate folio_queue chaining implementations I had (one for
read and one for write).
- Functions are provided to create/extend a buffer in a folio_queue
chain and tear it down again.
This is used to handle AFS directories, but could also be used to
create bounce buffers for content crypto and transport crypto.
- The was_async argument is dropped from netfs_read_subreq_terminated()
Instead we wake the read collection work item by either queuing it
or waking up the app thread.
- We don't need to use BH-excluding locks when communicating between
the issuing thread and the collection thread as neither of them now
run in BH context.
- Also included are a number of new tracepoints; a split of the
netfslib write collection code to put retrying into its own file
(it gets more complicated with content encryption).
- There are also some minor fixes AFS included, including fixing the
AFS directory format struct layout, reducing some directory
over-invalidation and making afs_mkdir() translate EEXIST to
ENOTEMPY (which is not available on all systems the servers
support).
- Finally, there's a patch to try and detect entry into the folio
unlock function with no folio_queue structs in the buffer (which
isn't allowed in the cases that can get there).
This is a debugging patch, but should be minimal overhead"
* tag 'vfs-6.14-rc1.netfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (31 commits)
netfs: Report on NULL folioq in netfs_writeback_unlock_folios()
afs: Add a tracepoint for afs_read_receive()
afs: Locally initialise the contents of a new symlink on creation
afs: Use the contained hashtable to search a directory
afs: Make afs_mkdir() locally initialise a new directory's content
netfs: Change the read result collector to only use one work item
afs: Make {Y,}FS.FetchData an asynchronous operation
afs: Fix cleanup of immediately failed async calls
afs: Eliminate afs_read
afs: Use netfslib for symlinks, allowing them to be cached
afs: Use netfslib for directories
afs: Make afs_init_request() get a key if not given a file
netfs: Add support for caching single monolithic objects such as AFS dirs
netfs: Add functions to build/clean a buffer in a folio_queue
afs: Add more tracepoints to do with tracking validity
cachefiles: Add auxiliary data trace
cachefiles: Add some subrequest tracepoints
netfs: Remove some extraneous directory invalidations
afs: Fix directory format encoding struct
afs: Fix EEXIST error returned from afs_rmdir() to be ENOTEMPTY
...
|
|
This was a suggestion by David Laight, and while I was slightly worried
that some micro-architecture would predict cmov like a conditional
branch, there is little reason to actually believe any core would be
that broken.
Intel documents that their existing cores treat CMOVcc as a data
dependency that will constrain speculation in their "Speculative
Execution Side Channel Mitigations" whitepaper:
"Other instructions such as CMOVcc, AND, ADC, SBB and SETcc can also
be used to prevent bounds check bypass by constraining speculative
execution on current family 6 processors (Intel® Core™, Intel® Atom™,
Intel® Xeon® and Intel® Xeon Phi™ processors)"
and while that leaves the future uarch issues open, that's certainly
true of our traditional SBB usage too.
Any core that predicts CMOV will be unusable for various crypto
algorithms that need data-independent timing stability, so let's just
treat CMOV as the safe choice that simplifies the address masking by
avoiding an extra instruction and doesn't need a temporary register.
Suggested-by: David Laight <David.Laight@aculab.com>
Link: https://www.intel.com/content/dam/develop/external/us/en/documents/336996-speculative-execution-side-channel-mitigations.pdf
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Back when we added SMAP support, all versions of binutils didn't
necessarily understand the 'clac' and 'stac' instructions. So we
implemented those instructions manually as ".byte" sequences.
But we've since upgraded the minimum version of binutils to version
2.25, and that included proper support for the SMAP instructions, and
there's no reason for us to use some line noise to express them any
more.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
|
|
|
|
Fix build warnings reported from linux-next.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lore.kernel.org/r/20250120192504.4a1965a0@canb.auug.org.au
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Share some infrastructure between sample programs and fix a build
failure that was reported.
Reported-by: Sasha Levin <sashal@kernel.org>
Link: https://lore.kernel.org/r/Z42UkSXx0MS9qZ9w@lappy
Link: https://qa-reports.linaro.org/lkft/sashal-linus-next/build/v6.13-rc7-511-g109a8e0fa9d6/testrun/26809210/suite/build/test/gcc-8-allyesconfig/log
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
This merges the vsnprintf internal cleanups I did, which were triggered
by a combination of performance issues (see for example commit
f9ed1f7c2e26: "genirq/proc: Use seq_put_decimal_ull_width() for decimal
values") and discussion about tracing abusing the vsnprintf code in odd
ways.
The intent was to improve code generation, but also to possibly
eventually expose the cleaned-up printf format decoding state machine.
It certainly didn't get to the point where we'd want to expose the
format decoding to external users, but it's an improvement over what we
used to have. Several of the complex case statements have been
simplified, or removed entirely to be replaced by simple table lookups.
* branch 'vsnprintf':
vsnprintf: fix the number base for non-numeric formats
vsnprintf: fix up kerneldoc for argument name changes
vsprintf: don't make the 'binary' version pack small integer arguments
vsnprintf: collapse the number format state into one single state
vsnprintf: mark the indirect width and precision cases unlikely
vsnprintf: inline skip_atoi() again
vsprintf: deal with format specifiers with a lookup table
vsprintf: deal with format flags with a simple lookup table
vsprintf: associate the format state with the format pointer
vsprintf: fix calling convention for format_decode()
vsprintf: avoid nested switch statement on same variable
vsprintf: simplify number handling
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Mark serialize() noinstr so that it can be used from instrumentation-
free code
- Make sure FRED's RSP0 MSR is synchronized with its corresponding
per-CPU value in order to avoid double faults in hotplug scenarios
- Disable EXECMEM_ROX on x86 for now because it didn't receive proper
x86 maintainers review, went in and broke a bunch of things
* tag 'x86_urgent_for_v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/asm: Make serialize() always_inline
x86/fred: Fix the FRED RSP0 MSR out of sync with its per-CPU cache
x86: Disable EXECMEM_ROX support
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Borislav Petkov:
- Reset hrtimers correctly when a CPU hotplug state traversal happens
"half-ways" and leaves hrtimers not (re-)initialized properly
- Annotate accesses to a timer group's ignore flag to prevent KCSAN
from raising data_race warnings
- Make sure timer group initialization is visible to timer tree walkers
and avoid a hypothetical race
- Fix another race between CPU hotplug and idle entry/exit where timers
on a fully idle system are getting ignored
- Fix a case where an ignored signal is still being handled which it
shouldn't be
* tag 'timers_urgent_for_v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
hrtimers: Handle CPU state correctly on hotplug
timers/migration: Annotate accesses to ignore flag
timers/migration: Enforce group initialization visibility to tree walkers
timers/migration: Fix another race between hotplug and idle entry/exit
signal/posixtimers: Handle ignore/blocked sequences correctly
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Fix an OF node leak in irqchip init's error handling path
- Fix sunxi systems to wake up from suspend with an NMI by
pressing the power button
- Do not spuriously enable interrupts in gic-v3 in a nested
interrupts-off section
- Make sure gic-v3 handles properly a failure to enter a
low power state
* tag 'irq_urgent_for_v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip: Plug a OF node reference leak in platform_irqchip_probe()
irqchip/sunxi-nmi: Add missing SKIP_WAKE flag
irqchip/gic-v3-its: Don't enable interrupts in its_irq_set_vcpu_affinity()
irqchip/gic-v3: Handle CPU_PM_ENTER_FAILED correctly
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Borislav Petkov:
- Do not adjust the weight of empty group entities and avoid
scheduling artifacts
- Avoid scheduling lag by computing lag properly and thus address
an EEVDF entity placement issue
* tag 'sched_urgent_for_v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Fix update_cfs_group() vs DELAY_DEQUEUE
sched/fair: Fix EEVDF entity placement bug causing scheduling lag
|
|
Output of io_uring_show_fdinfo() has several problems:
* racy use of ->d_iname
* junk if the name is long - in that case it's not stored in ->d_iname
at all
* lack of quoting (names can contain newlines, etc. - or be equal to "<none>",
for that matter).
* lines for empty slots are pointless noise - we already have the total
amount, so having just the non-empty ones would carry the same information.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fix from Steven Rostedt:
"Fix regression in GFP output in trace events
It was reported that the GFP flags in trace events went from human
readable to just their hex values:
gfp_flags=GFP_HIGHUSER_MOVABLE|__GFP_COMP to gfp_flags=0x140cca
This was caused by a change that added the use of enums in calculating
the GFP flags.
As defines get translated into their values in the trace event format
files, the user space tooling could easily convert the GFP flags into
their symbols via the __print_flags() helper macro.
The problem is that enums do not get converted, and the names of the
enums show up in the format files and user space tooling cannot
translate them.
Add TRACE_DEFINE_ENUM() around the enums used for GFP flags which is
the tracing infrastructure macro that informs the tracing subsystem
what the values for enums and it can then expose that to user space"
* tag 'trace-v6.13-rc7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: gfp: Fix the GFP enum values shown for user space tracing tools
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
"Another fix and testcase to avoid the newly added WARN in the case of
non-translatable addresses"
* tag 'devicetree-fixes-for-6.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of/address: Fix WARN when attempting translating non-translatable addresses
of/unittest: Add test that of_address_to_resource() fails on non-translatable address
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"Two last minute fixes: one build issue on TI soc drivers, and a
regression in the renesas reset controller driver"
* tag 'soc-fixes-6.13-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
soc: ti: pruss: Fix pruss APIs
reset: rzg2l-usbphy-ctrl: Assign proper of node to the allocated device
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
- dell-uart-backlight: Fix serdev race
- lenovo-yoga-tab2-pro-1380-fastcharger: Fix serdev race
* tag 'platform-drivers-x86-v6.13-6' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: lenovo-yoga-tab2-pro-1380-fastcharger: fix serdev race
platform/x86: dell-uart-backlight: fix serdev race
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull mtd revert from Miquel Raynal:
"Very late this cycle we identified a breakage that could potentially
hit several spi controller drivers because of a change in the way the
dummy cycles validity is checked.
We do not know at the moment how to handle the situation properly, so
we prefer to revert the faulty patch for the next release"
* tag 'mtd/fixes-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
Revert "mtd: spi-nor: core: replace dummy buswidth from addr to data"
|
|
Tracing tools like perf and trace-cmd read the /sys/kernel/tracing/events/*/*/format
files to know how to parse the data and also how to print it. For the
"print fmt" portion of that file, if anything uses an enum that is not
exported to the tracing system, user space will not be able to parse it.
The GFP flags use to be defines, and defines get translated in the print
fmt sections. But now they are converted to use enums, which is not.
The mm_page_alloc trace event format use to have:
print fmt: "page=%p pfn=0x%lx order=%d migratetype=%d gfp_flags=%s",
REC->pfn != -1UL ? (((struct page *)vmemmap_base) + (REC->pfn)) : ((void
*)0), REC->pfn != -1UL ? REC->pfn : 0, REC->order, REC->migratetype,
(REC->gfp_flags) ? __print_flags(REC->gfp_flags, "|", {( unsigned
long)(((((((( gfp_t)(0x400u|0x800u)) | (( gfp_t)0x40u) | (( gfp_t)0x80u) |
(( gfp_t)0x100000u)) | (( gfp_t)0x02u)) | (( gfp_t)0x08u) | (( gfp_t)0)) |
(( gfp_t)0x40000u) | (( gfp_t)0x80000u) | (( gfp_t)0x2000u)) & ~((
gfp_t)(0x400u|0x800u))) | (( gfp_t)0x400u)), "GFP_TRANSHUGE"}, {( unsigned
long)((((((( gfp_t)(0x400u|0x800u)) | (( gfp_t)0x40u) | (( gfp_t)0x80u) |
(( gfp_t)0x100000u)) | (( gfp_t)0x02u)) | (( gfp_t)0x08u) | (( gfp_t)0)) ...
Where the GFP values are shown and not their names. But after the GFP
flags were converted to use enums, it has:
print fmt: "page=%p pfn=0x%lx order=%d migratetype=%d gfp_flags=%s",
REC->pfn != -1UL ? (vmemmap + (REC->pfn)) : ((void *)0), REC->pfn != -1UL
? REC->pfn : 0, REC->order, REC->migratetype, (REC->gfp_flags) ?
__print_flags(REC->gfp_flags, "|", {( unsigned long)((((((((
gfp_t)(((((1UL))) << (___GFP_DIRECT_RECLAIM_BIT))|((((1UL))) <<
(___GFP_KSWAPD_RECLAIM_BIT)))) | (( gfp_t)((((1UL))) << (___GFP_IO_BIT)))
| (( gfp_t)((((1UL))) << (___GFP_FS_BIT))) | (( gfp_t)((((1UL))) <<
(___GFP_HARDWALL_BIT)))) | (( gfp_t)((((1UL))) << (___GFP_HIGHMEM_BIT))))
| (( gfp_t)((((1UL))) << (___GFP_MOVABLE_BIT))) | (( gfp_t)0)) | ((
gfp_t)((((1UL))) << (___GFP_COMP_BIT))) ...
Where the enums names like ___GFP_KSWAPD_RECLAIM_BIT are shown and not their
values. User space has no way to convert these names to their values and
the output will fail to parse. What is shown is now:
mm_page_alloc: page=0xffffffff981685f3 pfn=0x1d1ac1 order=0 migratetype=1 gfp_flags=0x140cca
The TRACE_DEFINE_ENUM() macro was created to handle enums in the print fmt
files. This causes them to be replaced at boot up with the numbers, so
that user space tooling can parse it. By using this macro, the output is
back to the human readable:
mm_page_alloc: page=0xffffffff981685f3 pfn=0x122233 order=0 migratetype=1 gfp_flags=GFP_HIGHUSER_MOVABLE|__GFP_COMP
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Veronika Molnarova <vmolnaro@redhat.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/20250116214438.749504792@goodmis.org
Reported-by: Michael Petlan <mpetlan@redhat.com>
Closes: https://lore.kernel.org/all/87be5f7c-1a0-dad-daa0-54e342efaea7@redhat.com/
Fixes: 772dd0342727c ("mm: enumerate all gfp flags")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- ltc2991, tmp513: Fix problems seen when dividing negative numbers
- drivetemp: Handle large timeouts observed on some drives
- acpi_power_meter: Fix loading the driver on platforms without _PMD
method
* tag 'hwmon-for-v6.13-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (ltc2991) Fix mixed signed/unsigned in DIV_ROUND_CLOSEST
hwmon: (drivetemp) Set scsi command timeout to 10s
hwmon: (acpi_power_meter) Fix a check for the return value of read_domain_devices().
hwmon: (tmp513) Fix division of negative numbers
|
|
This is disallowed.
This check will now be relevant since the device mapper personalities
will start to support atomic writes, and they use this function.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Link: https://lore.kernel.org/r/20250116170301.474130-3-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently only stacked devices need to explicitly enable atomic writes by
setting BLK_FEAT_ATOMIC_WRITES_STACKED flag.
This does not work well for device mapper stacking devices, as there many
sets of limits are stacked and what is the 'bottom' and 'top' device can
swapped. This means that BLK_FEAT_ATOMIC_WRITES_STACKED needs to be set
for many queue limits, which is messy.
Generalize enabling atomic writes enabling by ensuring that all devices
must explicitly set a flag - that includes NVMe, SCSI sd, and md raid.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Link: https://lore.kernel.org/r/20250116170301.474130-2-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fix from Bartosz Golaszewski:
- convert regular spinlock to raw spinlock in gpio-xilinx to avoid a
lockdep splat
* tag 'gpio-fixes-for-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: xilinx: Convert gpio_lock to raw spinlock
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
- fix ref leak in the I2C core
- fix remove notification in the address translator
- missing error check in the pinctrl demuxer (plus a typo fix)
- fix NAK handling when Linux is testunit target
- fix NAK handling for the Renesas R-Car controller when it is a target
* tag 'i2c-for-6.13-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: testunit: on errors, repeat NACK until STOP
i2c: rcar: fix NACK handling when being a target
i2c: mux: demux-pinctrl: correct comment
i2c: mux: demux-pinctrl: check initial mux selection, too
i2c: atr: Fix client detach
i2c: core: fix reference leak in i2c_register_adapter()
|
|
edac-updates
* ras/edac-drivers:
EDAC/cell: Remove powerpc Cell driver
EDAC: Add an EDAC driver for the Loongson memory controller
EDAC/{i10nm,skx,skx_common}: Support UV systems
EDAC/i10nm: Add Intel Clearwater Forest server support
* ras/edac-misc:
EDAC: Fix typos in comments
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain fix from Ulf Hansson:
- imx8mp-blk-ctrl: Add missing loop break condition
* tag 'pmdomain-v6.13-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
pmdomain: imx8mp-blk-ctrl: add missing loop break condition
|
|
* for-next/perf: (29 commits)
perf docs: arm_spe: Document new discard mode
perf: arm_spe: Add format option for discard mode
MAINTAINERS: Add perf list for drivers/perf/
drivers/perf: apple_m1: Map generic branch events
drivers/perf: hisi: Set correct IRQ affinity for PMUs with no association
perf: imx9_perf: Introduce AXI filter version to refactor the driver and better extension
perf/arm-cmn: Permit more exhaustive groups
perf/dwc_pcie: Qualify RAS DES VSEC Capability by Vendor, Revision
drivers/perf: hisi: Delete redundant blank line of DDRC PMU
drivers/perf: hisi: Fix incorrect variable name "hha_pmu" in DDRC PMU driver
drivers/perf: hisi: Export associated CPUs of each PMU through sysfs
drivers/perf: hisi: Provide a generic implementation of cpumask/identifier
drivers/perf: hisi: Add a common function to retrieve topology from firmware
drivers/perf: hisi: Extract topology information to a separate structure
drivers/perf: hisi: Refactor the detection of associated CPUs
drivers/perf: hisi: Migrate to one online CPU if no associated one online
drivers/perf: hisi: Don't update the associated_cpus on CPU offline
drivers/perf: hisi: Define a symbol namespace for HiSilicon Uncore PMUs
perf/marvell: Odyssey LLC-TAD performance monitor support
perf/marvell: Refactor to extract platform data
...
|
|
* for-next/mm:
arm64: mm: Test for pmd_sect() in vmemmap_check_pmd()
arm64/mm: Replace open encodings with PXD_TABLE_BIT
arm64/mm: Rename pte_mkpresent() as pte_mkvalid()
arm64: Kconfig: force ARM64_PAN=y when enabling TTBR0 sw PAN
arm64/kvm: Avoid invalid physical addresses to signal owner updates
arm64/kvm: Configure HYP TCR.PS/DS based on host stage1
arm64/mm: Override PARange for !LPA2 and use it consistently
arm64/mm: Reduce PA space to 48 bits when LPA2 is not enabled
|
|
* for-next/misc:
arm64: Remove duplicate included header
arm64/Kconfig: Drop EXECMEM dependency from ARCH_WANTS_EXECMEM_LATE
arm64: asm: Fix typo in pgtable.h
arm64/mm: Ensure adequate HUGE_MAX_HSTATE
arm64/mm: Replace open encodings with PXD_TABLE_BIT
arm64/mm: Drop INIT_MM_CONTEXT()
|
|
* for-next/docs:
Documentation: arm64: Remove stale and redundant virtual memory diagrams
docs: arm64: Document EL3 requirements for FEAT_PMUv3
docs: arm64: Document EL3 requirements for cpu debug architecture
|
|
* for-next/cpufeature:
kselftest/arm64: Add 2024 dpISA extensions to hwcap test
KVM: arm64: Allow control of dpISA extensions in ID_AA64ISAR3_EL1
arm64/hwcap: Describe 2024 dpISA extensions to userspace
arm64/sysreg: Update ID_AA64SMFR0_EL1 to DDI0601 2024-12
arm64: Filter out SVE hwcaps when FEAT_SVE isn't implemented
arm64/sme: Move storage of reg_smidr to __cpuinfo_store_cpu()
arm64/sysreg: Update ID_AA64ISAR2_EL1 to DDI0601 2024-09
arm64/sysreg: Update ID_AA64ZFR0_EL1 to DDI0601 2024-09
arm64/sysreg: Update ID_AA64FPFR0_EL1 to DDI0601 2024-09
arm64/sysreg: Update ID_AA64ISAR3_EL1 to DDI0601 2024-09
arm64/sysreg: Update ID_AA64PFR2_EL1 to DDI0601 2024-09
arm64/sysreg: Get rid of CPACR_ELx SysregFields
arm64/sysreg: Convert *_EL12 accessors to Mapping
arm64/sysreg: Get rid of the TCR2_EL1x SysregFields
arm64/sysreg: Allow a 'Mapping' descriptor for system registers
arm64/cpufeature: Refactor conditional logic in init_cpu_ftr_reg()
arm64: cpufeature: Add HAFT to cpucap_is_possible()
|
|
* for-next/cca:
arm64: rsi: Add automatic arm-cca-guest module loading
|
|
Merge the slab feature branch for 6.14:
- Move the kfree_rcu() implementation from RCU to SLAB subsystem
(Uladzislau Rezki)
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"7 singleton hotfixes. 6 are MM.
Two are cc:stable and the remainder address post-6.12 issues"
* tag 'mm-hotfixes-stable-2025-01-16-21-11' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
ocfs2: check dir i_size in ocfs2_find_entry
mailmap: update entry for Ethan Carter Edwards
mm: zswap: move allocations during CPU init outside the lock
mm: khugepaged: fix call hpage_collapse_scan_file() for anonymous vma
mm: shmem: use signed int for version handling in casefold option
alloc_tag: skip pgalloc_tag_swap if profiling is disabled
mm: page_alloc: fix missed updates of lowmem_reserve in adjust_managed_page_count
|
|
Pull smb client fixes from Steve French:
- fix double free when reconnect racing with closing session
- fix SMB1 reconnect with password rotation
* tag '6.13-rc7-SMB3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: fix double free of TCP_Server_Info::hostname
cifs: support reconnect with alternate password for SMB1
|
|
Pull drm fixes from Dave Airlie:
"Final(?) set of fixes for 6.13, I think the holidays finally caught up
with everyone, the misc changes are 2 weeks worth, otherwise amdgpu
and xe are most of it. The largest pieces is a new test so I'm not too
worried about that.
kunit:
- Fix W=1 build for kunit tests
bridge:
- Handle YCbCr420 better in bridge code, with tests
- itee-it6263 error handling fix
amdgpu:
- SMU 13 fix
- DP MST fixes
- DCN 3.5 fix
- PSR fixes
- eDP fix
- VRR fix
- Enforce isolation fixes
- GFX 12 fix
- PSP 14.x fix
xe:
- Add steering info support for GuC register lists
- Add means to wait for reset and synchronous reset
- Make changing ccs_mode a synchronous action
- Add missing mux registers
- Mark ComputeCS read mode as UC on iGPU, unblocking ULLS on iGPU
i915:
- Relax clear color alignment to 64 bytes [fb]
v3d:
- Fix warn when unloading v3d
nouveau:
- Fix cross-device fence handling in nouveau
- Fix backlight regression for macbooks 5,1
vmwgfx:
- Fix BO reservation handling in vmwgfx"
* tag 'drm-fixes-2025-01-17' of https://gitlab.freedesktop.org/drm/kernel: (33 commits)
drm/xe: Mark ComputeCS read mode as UC on iGPU
drm/xe/oa: Add missing VISACTL mux registers
drm/xe: make change ccs_mode a synchronous action
drm/xe: introduce xe_gt_reset and xe_gt_wait_for_reset
drm/xe/guc: Adding steering info support for GuC register lists
drm/bridge: ite-it6263: Prevent error pointer dereference in probe()
drm/v3d: Ensure job pointer is set to NULL after job completion
drm/vmwgfx: Add new keep_resv BO param
drm/vmwgfx: Remove busy_places
drm/vmwgfx: Unreserve BO on error
drm/amdgpu: fix fw attestation for MP0_14_0_{2/3}
drm/amdgpu: always sync the GFX pipe on ctx switch
drm/amdgpu: disable gfxoff with the compute workload on gfx12
drm/amdgpu: Fix Circular Locking Dependency in AMDGPU GFX Isolation
drm/i915/fb: Relax clear color alignment to 64 bytes
drm/amd/display: Disable replay and psr while VRR is enabled
drm/amd/display: Fix PSR-SU not support but still call the amdgpu_dm_psr_enable
nouveau/fence: handle cross device fences properly
drm/tests: connector: Add ycbcr_420_allowed tests
drm/connector: hdmi: Validate supported_formats matches ycbcr_420_allowed
...
|
|
Module functions can be set to set_ftrace_filter before the module is
loaded.
# echo :mod:snd_hda_intel > set_ftrace_filter
This will enable all the functions for the module snd_hda_intel. If that
module is not loaded, it is "cached" in the trace array for when the
module is loaded, its functions will be traced.
But this is not implemented in the kernel command line. That's because the
kernel command line filtering is added very early in boot up as it is
needed to be done before boot time function tracing can start, which is
also available very early in boot up. The code used by the
"set_ftrace_filter" file can not be used that early as it depends on some
other initialization to occur first. But some of the functions can.
Implement the ":mod:" feature of "set_ftrace_filter" in the kernel command
line parsing. Now function tracing on just a single module that is loaded
at boot up can be done.
Adding:
ftrace=function ftrace_filter=:mod:sna_hda_intel
To the kernel command line will only enable the sna_hda_intel module
functions when the module is loaded, and it will start tracing.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250116175832.34e39779@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Adopt __free() and guard() for trace_fprobe.c to remove gotos.
Link: https://lore.kernel.org/173708043449.319651.12242878905778792182.stgit@mhiramat.roam.corp.google.com
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Pull io_uring fixes from Jens Axboe:
"One fix for the error handling in buffer cloning, and one fix for the
ring resizing.
Two minor followups for the latter as well.
Both of these issues only affect 6.13, so not marked for stable"
* tag 'io_uring-6.13-20250116' of git://git.kernel.dk/linux:
io_uring/register: cache old SQ/CQ head reading for copies
io_uring/register: document io_register_resize_rings() shared mem usage
io_uring/register: use stable SQ/CQ ring data during resize
io_uring/rsrc: fixup io_clone_buffers() error handling
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
Several fixes for the new dmem cgroup controller and the HDMI framework
audio support
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250116-bold-furry-perch-b1ca0e@houat
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
Driver Changes:
- Add steering info support for GuC register lists (Jesus Narvaez)
- Add means to wait for reset and synchronous reset (Maciej)
- Make changing ccs_mode a synchronous action (Maciej)
- Add missing mux registers (Ashutosh)
- Mark ComputeCS read mode as UC on iGPU, unblocking ULLS on iGPU (Matt Brost)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Z4ll3F1anLEwCvrf@fedora
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix a regression in the irqsoff and wakeup latency tracing
The function graph tracer infrastructure has become generic so that
fprobes and BPF can be based on it. As it use to only handle function
graph tracing, it would always calculate the time the function
entered so that it could then calculate the time it exits and give
the length of time the function executed for. But this is not needed
for the other users (fprobes and BPF) and reading the clock adds a
non-negligible overhead, so the calculation was moved into the
function graph tracer logic.
But the irqsoff and wakeup latency tracers, when the "display-graph"
option was set, would use the function graph tracer to calculate the
times of functions during the latency. The movement of the calltime
calculation made the value zero for these tracers, and the output no
longer showed the length of time of each tracer, but instead the
absolute timestamp of when the function returned (rettime - calltime
where calltime is now zero).
Have the irqsoff and wakeup latency tracers also do the calltime
calculation as the function graph tracer does and report the proper
length of the function timings.
- Update the tracing display to reflect the new preempt lazy model
When the system is configured with preempt lazy, the output of the
trace data would state "unknown" for the current preemption model.
Because the lazy preemption model was just added, make it known to
the tracing subsystem too. This is just a one line change.
- Document multiple function graph having slightly different timings
Now that function graph tracer infrastructure is separate, this also
allows the function graph tracer to run in multiple instances (it
wasn't able to do so before). If two instances ran the function graph
tracer and traced the same functions, the timings for them will be
slightly different because each does their own timings and collects
the timestamps differently. Document this to not have people be
confused by it.
* tag 'trace-v6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ftrace: Document that multiple function_graph tracing may have different times
tracing: Print lazy preemption model
tracing: Fix irqsoff and wakeup latency tracers when using function graph
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes
- Relax clear color alignment to 64 bytes [fb] (Ville Syrjälä)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tursulin@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Z4fdIVf68qsqIpiN@linux
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mdraid/linux into for-6.14/block
Pull MD fix from Song.
* tag 'md-6.14-20250116' of https://git.kernel.org/pub/scm/linux/kernel/git/mdraid/linux:
md/md-linear: Fix a NULL vs IS_ERR() bug in linear_add()
|
|
RING_CMD_CCTL read index should be UC on iGPU parts due to L3 caching
structure. Having this as WB blocks ULLS from being enabled. Change to
UC to unblock ULLS on iGPU.
v2:
- Drop internal communications commnet, bspec is updated
Cc: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Cc: Michal Mrozek <michal.mrozek@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: stable@vger.kernel.org
Fixes: 328e089bfb37 ("drm/xe: Leverage ComputeCS read L3 caching")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Michal Mrozek <michal.mrozek@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250114002507.114087-1-matthew.brost@intel.com
(cherry picked from commit 758debf35b9cda5450e40996991a6e4b222899bd)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
Problem: The x86_64 UEFI doc references Elilo which is an
unmaintained/orphaned bootloader project. Also, on x86_64 a bootloader
is technically not actually required since there is support for the
Linux EFI stub.
Solution: Remove the references to Elilo from the doc and refer to the
EFI stub doc page, update steps accordingly, and add more details about
creation of the EFI partition to improve clarity.
Signed-off-by: Nir Lichtman <nir@lichtman.org>
Link: https://lore.kernel.org/r/20250108113522.GA897677@lichtman.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
There is no mention of timer_migration in the docs. Add
a short description.
Signed-off-by: Phil Auld <pauld@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250114190525.169022-1-pauld@redhat.com
|
|
"zone_t" doesn't exist in current code base anymore, remove the
description of it.
Signed-off-by: I Hsin Cheng <richard120310@gmail.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250115070355.41769-1-richard120310@gmail.com
|
|
The linear_conf() returns error pointers, it doesn't return NULL. Update
the error checking to match.
Fixes: 127186cfb184 ("md: reintroduce md-linear")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/add654be-759f-4b2d-93ba-a3726dae380c@stanley.mountain
Signed-off-by: Song Liu <song@kernel.org>
|
