| Age | Commit message (Collapse) | Author |
|---|
|
This sd_init() function reads the firmware. The firmware data holds a
series of records and the function reads each record and sends the data
to the device. The request_ihex_firmware() function
calls ihex_validate_fw() which ensures that the total length of all the
records won't read out of bounds of the fw->data[].
However, a potential issue is if there is a single very large
record (larger than PAGE_SIZE) and that would result in memory
corruption. Generally we trust the firmware, but it's always better to
double check.
Fixes: 49b61ec9b5af ("[media] gspca: Add new vicam subdriver")
Cc: stable@vger.kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Besides list_entry_is_past_end() is the same as list_entry_is_head(),
it's implemented in the list namespace. Fix both of the issue by replacing
the custom version with list_entry_is_head() calls.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
The HW can only do write-then-read transactions. This is a common
limitation, so we can add an adapter quirk flag to let the I2C core
enforce the checks instead of open coding them.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
This driver passes the length of an i2c_msg directly to
usb_control_msg(). If the message is now a read and of length 0, it
violates the USB protocol and a warning will be printed. Enable the
I2C_AQ_NO_ZERO_LEN_READ quirk for this adapter thus forbidding 0-length
read messages altogether.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
saa7164_cmd_signal() last use was removed in 2009 by
commit 39e469ab6dee ("V4L/DVB (12940): SAA7164: IRQ / message timeout
related change")
saa7164_buffer_display() was added in 2010 by
commit add3f580a434 ("[media] saa7164: convert buffering structs to be more
generic")
but is unused.
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
When an program is streaming (ffplay) and another program (qv4l2)
changes the TV standard from NTSC to PAL, the kernel crashes due to trying
to copy to unmapped memory.
Changing from NTSC to PAL increases the resolution in the usbtv struct,
but the video plane buffer isn't adjusted, so it overflows.
Fixes: 0e0fe3958fdd13d ("[media] usbtv: Add support for PAL video source")
Cc: stable@vger.kernel.org
Signed-off-by: Ludwig Disterhof <ludwig@disterhof.eu>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
[hverkuil: call vb2_is_busy instead of vb2_is_streaming]
|
|
'struct i2c_algorithm' is not modified in this driver.
Constifying this structure moves some data to a read-only section, so
increase overall security, especially when the structure holds some
function pointers.
On a x86_64, with allmodconfig, as an example:
Before:
======
text data bss dec hex filename
6645 216 16 6877 1add drivers/media/common/b2c2/flexcop-i2c.o
After:
=====
text data bss dec hex filename
6721 160 16 6897 1af1 drivers/media/common/b2c2/flexcop-i2c.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Replace the check for firmware registered I²C devices as the firmware node
independently on type should be retrieved via dev_fwnode().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
GPIO core already handles missing direction_input/output() callbacks.
The ones in this driver also effectively return magic numbers which is
not optimal either (the number accidentally corresponds with -EPERM which
is different from the number GPIOLIB returns and so inconsistent). Just
remove them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
In dib7090p_rw_on_apb, msg is controlled by user. When msg[0].buf is null and
msg[0].len is zero, former checks on msg[0].buf would be passed. If accessing
msg[0].buf[2] without sanity check, null pointer deref would happen. We add
check on msg[0].len to prevent crash. Similar issue occurs when access
msg[1].buf[0] and msg[1].buf[1].
Similar commit: commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()")
Signed-off-by: Alex Guo <alexguo1023@gmail.com>
Link: https://lore.kernel.org/r/20250616013231.730221-1-alexguo1023@gmail.com
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
w7090p_tuner_write_serpar and w7090p_tuner_read_serpar
In w7090p_tuner_write_serpar, msg is controlled by user. When msg[0].buf is null and msg[0].len is zero, former checks on msg[0].buf would be passed. If accessing msg[0].buf[2] without sanity check, null pointer deref would happen. We add
check on msg[0].len to prevent crash.
Similar commit: commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()")
Signed-off-by: Alex Guo <alexguo1023@gmail.com>
Link: https://lore.kernel.org/r/20250616013353.738790-1-alexguo1023@gmail.com
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
With Gen2 converted to use the common media device there is only one
caller left for the helper to notify a video device of an event, fold it
in.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20250613153434.2001800-14-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Complete the conversion from soc_camera to a full fledge media
controller enabled devices for all supported generations of the device.
All work is already done as this is already supported on Gen3, and
later.
All that is missing is removing all special cases for the non
media-graph call paths and use the common ones in their place.
The one change that stands out is dropping the doubling of the height in
the Gen2 scaler setup, rvin_scaler_gen2(). In the Gen2 non-MC world the
VIN size was set to match the video source subdevices, and if that was a
TOP/BOTTOM video source it needed to be doubled for the scaler to
function properly. In the MC world this is now handled by user-space
configuration of the pipeline and the adjustment is not needed.
Mark the completion of converting from soc_camera by injecting an
attribution of myself in the header.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20250613153434.2001800-13-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Before moving Gen2 to media controller simplify the creation of controls
by not exposing the sub-device controls on the video device. This could
be done while enabling media controller but doing it separately reduces
the changes needed to do so.
The rework also allows the cleanup and remove paths to be simplified by
folding all special cases into the only remaining call site.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20250613153434.2001800-12-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
On Gen2 where sub-devices where not exposed to user-space the field
TB/BT ordering was controlled by a hack in the VIN driver. Before
converting it to media device model where the subdevice is exposed
remove that hack.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20250613153434.2001800-11-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Prepare for Gen2 media graph support by always initializing a media pad
for the VIN device.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20250613153434.2001800-10-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
The VIN usage of v4l-async is complex and stems from organic growth of
the driver of supporting both private local subdevices (Gen2, Gen3) and
subdevices shared between all VIN instances (Gen3 and Gen4).
The driver used a separate notifier for each VIN for the private local
ones, and a shared group notifier for the shared ones. This was complex
and lead to subtle bugs when unbinding and later rebinding subdevices in
one of the notifiers having to handle different edge cases depending on
if it also had subdevices in the other notifiers etc.
To simplify this have the Gen2 devices allocate and form a VIN group
too. This way all subdevices on all models can be collect in a
single group notifier. Then there is only a single complete callback for
all where the video devices and subdevice nodes can be registered etc.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20250613153434.2001800-9-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Use the __free(fwnode_handle) hooks to free the endpoints when the
function exits to simplify the error paths and make the intent more
clear.
While at it correct the error message when failing to parse an endpoint
to report the correct node.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20250613153434.2001800-8-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
The R-Car VIN driver is needlessly complex and uses more then one
v4l-async notifier to attach to all its subdevices. Prepare for unifying
them by moving rvin_parallel_parse_of() to where it needs to be when
they are unified.
The function is moved verbatim and there is no change in behavior.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20250613153434.2001800-7-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Prepare to move Gen2 and earlier models to media controller by
generating a unique VIN group id for each VIN instance. On Gen3 and Gen4
it is important to have a specific id in the group as media graph routes
depend on this. On Gen2 and earlier models all that will matter is to
have a unique id in the range.
Break out the id generation to a own function keeping the logic for Gen3
and Gen4 while generating a sequential id for Gen2 models.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20250613153434.2001800-6-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Prepare for more failed probe conditions that needs cleanup by
converting the error path to use labels.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20250613153434.2001800-5-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
The link setup callback once acted on each VIN instance, and expected to
be called once for each VIN instance. This have changed as the driver
grew support for later hardware generations and the callback is now
expected to setup links for all VIN in the group.
The argument to the callback has however remained a pointer to a single
VIN instance. This pointer was then used to get the group structure. Fix
this and pass the group as the single argument to the link setup
callback making the expectation of the function clear.
There is no intentional change in behavior.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20250613153434.2001800-4-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
When the transition of Gen2 to use groups are complete the platform
specific information can be retrieved from the group instead of being
duplicated in each VIN's private data structure.
Prepare for this by already adding the information to the group
structure so it can be used without first having to find the group from
a VIN instances private data.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20250613153434.2001800-3-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
When extending the driver with Gen4 support the iteration of over
possible remote subdevices changed from being R-Car CSI-2 Rx only to
also cover R-Car CSISP instances. In two loops updating the bounds
variable was missed.
This had no ill effect as the count the two values have always been the
same in the past. Fix it by looking at the array size.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20250613153434.2001800-2-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Add D-PHY support for V4H in addition to the already supported C-PHY.
The common start-up procedure for C-PHY and D-PHY is shared, only PHY
setup differ. Extend the V4H setup with D-PHY support as documented in
the datasheet (Rev.1.21).
Most of the start-up procedure is only documented as magic values in
tables, there is little documentation to make the settings more clear.
Wherever possible formulas or lookup tables are used as they are
documented in the datasheet.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20250612175904.1126717-5-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Prepare for adding D-PHY support to the driver by first updating the
generic startup procedure that covers both C-PHY and D-PHY operations.
The starting procedure where updated in later versions of the datasheet.
Most of the configuration is only documented as tables of magic values
in the documentation. Each step is however marked with a T<n> marker,
inject these markers in the comments to make it easier to map driver to
documentation.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20250612175904.1126717-4-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Each AFE lane has a set of control and offset registers. The registers
themself are undocumented but later datasheets program more of them with
magic values. Before exploding the driver with more defines to name them
all rework the AFE ones to be able to address all controls and offsets.
Also move a stray define that is out of sequence.
There is no functional change.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20250612175904.1126717-3-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
The helper function to deal with calculating the link speed is designed
in such a way that it returns the correct type bps (bits per second) for
D-PHY and sps (symbols per second) for C-PHY. And for historical reasons
the function kept the name mbps.
This is confusing, fix it by having the function only deal with bps
values as this is the most common use-case and convert bps to sps in the
only function where it is needed to configure the C-PHY.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20250612175904.1126717-2-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
The VSPD block on the RZ/V2N SoC is identical to the one found on the
RZ/G2L SoC.
No driver changes are required, as `renesas,r9a07g044-vsp2` will be used
as a fallback compatible string on the RZ/V2N SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20250530154148.374663-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
The FCPVD block on the RZ/V2N SoC is identical to the one found on the
RZ/G2L SoC.
No driver changes are required, as `renesas,fcpv` will be used as a
fallback compatible string on the RZ/V2N SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20250530154148.374663-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
The buffer length check before calling uvc_parse_format() only ensured
that the buffer has at least 3 bytes (buflen > 2), buf the function
accesses buffer[3], requiring at least 4 bytes.
This can lead to an out-of-bounds read if the buffer has exactly 3 bytes.
Fix it by checking that the buffer has at least 4 bytes in
uvc_parse_format().
Signed-off-by: Youngjun Lee <yjjuny.lee@samsung.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Fixes: c0efd232929c ("V4L/DVB (8145a): USB Video Class driver")
Cc: stable@vger.kernel.org
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20250610124107.37360-1-yjjuny.lee@samsung.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
HP Webcam HD 2300 does not seem to flip the FID bit according to spec.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 239 Miscellaneous Device
bDeviceSubClass 2 [unknown]
bDeviceProtocol 1 Interface Association
bMaxPacketSize0 64
idVendor 0x03f0 HP, Inc
idProduct 0xe207 HP Webcam HD 2300
bcdDevice 10.20
iManufacturer 3 Hewlett Packard
iProduct 1 HP Webcam HD 2300
iSerial 0
bNumConfigurations 1
Reported-by: Michaël Melchiore <rohel01@gmail.com>
Closes: https://lore.kernel.org/linux-media/CA+q66aRvTigH15cUyfvzPJ2mfsDFMt=CjuYNwvAZb29w8b1KDA@mail.gmail.com
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20250602-uvc-hp-quirk-v1-1-7047d94d679f@chromium.org
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Declaring a variable for doing automatic cleanup is not a very common
pattern. Replace the cleanup macro with manual cleanup to make the code
simpler.
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20250509-uvc-followup-v1-3-73bcde30d2b5@chromium.org
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Do uvc_pm_get before we call uvc_queue_streamon. Although the current
code is correct, uvc_ioctl_streamon is allways called after uvc_pm_get,
this change makes the code more resiliant to future changes.
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20250509-uvc-followup-v1-2-73bcde30d2b5@chromium.org
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Today uvc_ctrl_set_handle() covers two use-uses: setting the handle and
clearing the handle. The only common code between the two cases is the
lockdep_assert_held.
The code looks cleaner if we split these two usecases in two functions.
We also take this opportunity to use pending_async_ctrls from ctrl where
possible.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20250509-uvc-followup-v1-1-73bcde30d2b5@chromium.org
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Now we are replacing most of the error codes with -ENODEV.
Instead, Populate the error code from the functions called by
uvc_probe().
Take this opportunity to replace a generic error code from
uvc_scan_device() into something more meaningful.
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20250523-uvc-followup-v2-1-487541656e83@chromium.org
Signed-off-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
To implement VIDIOC_QUERYCTRL, we need to know the minimum, maximum,
step and flags of the control. For some of the controls, this involves
querying the actual hardware.
Some non-compliant cameras produce errors when we query them. These
error can be triggered every time, sometimes, or when other controls do
not have the "right value". Right now, we populate that error to userspace.
When an error happens, the v4l2 framework does not copy the v4l2_queryctrl
struct to userspace. Also, userspace apps are not ready to handle any
other error than -EINVAL.
One of the main usecases of VIDIOC_QUERYCTRL is enumerating the controls
of a device. This is done using the V4L2_CTRL_FLAG_NEXT_CTRL flag. In
that usecase, a non-compliant control will make it almost impossible to
enumerate all controls of the device.
A control with an invalid max/min/step/flags is better than non being
able to enumerate the rest of the controls.
This patch:
- Retries for an extra attempt to read the control, to avoid spurious
errors. More attempts do not seem to produce better results in the
tested hardware.
- Makes VIDIOC_QUERYCTRL return 0 for -EIO errors.
- Introduces a warning in dmesg so we can have a trace of what has happened
and sets the V4L2_CTRL_FLAG_DISABLED.
- Makes sure we keep returning V4L2_CTRL_FLAG_DISABLED for all the next
attempts to query that control (other operations have the same
functionality as now).
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20250502-uvc-eaccess-v8-1-0b8b58ac1142@chromium.org
Signed-off-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Some broken device return wrong dwMaxPayloadTransferSize fields as
follows:
[ 218.632537] uvcvideo: Device requested 2752512 B/frame bandwidth.
[ 218.632598] uvcvideo: No fast enough alt setting for requested bandwidth.
When dwMaxPayloadTransferSize is greater than maxpsize, it will prevent
the camera from starting. So use the bandwidth of maxpsize.
Signed-off-by: chenchangcheng <chenchangcheng@kylinos.cn>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20250510061803.811433-1-ccc194101@163.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull turbostat updates from Len Brown:
- Add initial DMR support, which required smarter RAPL probe
- Fix AMD MSR RAPL energy reporting
- Add RAPL power limit configuration output
- Minor fixes
* tag 'turbostat-2025.06.08' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
tools/power turbostat: version 2025.06.08
tools/power turbostat: Add initial support for BartlettLake
tools/power turbostat: Add initial support for DMR
tools/power turbostat: Dump RAPL sysfs info
tools/power turbostat: Avoid probing the same perf counters
tools/power turbostat: Allow probing RAPL with platform_features->rapl_msrs cleared
tools/power turbostat: Clean up add perf/msr counter logic
tools/power turbostat: Introduce add_msr_counter()
tools/power turbostat: Remove add_msr_perf_counter_()
tools/power turbostat: Remove add_cstate_perf_counter_()
tools/power turbostat: Remove add_rapl_perf_counter_()
tools/power turbostat: Quit early for unsupported RAPL counters
tools/power turbostat: Always check rapl_joules flag
tools/power turbostat: Fix AMD package-energy reporting
tools/power turbostat: Fix RAPL_GFX_ALL typo
tools/power turbostat: Add Android support for MSR device handling
tools/power turbostat.8: pm_domain wording fix
tools/power turbostat.8: fix typo: idle_pct should be pct_idle
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer cleanup from Thomas Gleixner:
"The delayed from_timer() API cleanup:
The renaming to the timer_*() namespace was delayed due massive
conflicts against Linux-next. Now that everything is upstream finish
the conversion"
* tag 'timers-cleanups-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
treewide, timers: Rename from_timer() to timer_container_of()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A small set of x86 fixes:
- Cure IO bitmap inconsistencies
A failed fork cleans up all resources of the newly created thread
via exit_thread(). exit_thread() invokes io_bitmap_exit() which
does the IO bitmap cleanups, which unfortunately assume that the
cleanup is related to the current task, which is obviously bogus.
Make it work correctly
- A lockdep fix in the resctrl code removed the clearing of the
command buffer in two places, which keeps stale error messages
around. Bring them back.
- Remove unused trace events"
* tag 'x86-urgent-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
fs/resctrl: Restore the rdt_last_cmd_clear() calls after acquiring rdtgroup_mutex
x86/iopl: Cure TIF_IO_BITMAP inconsistencies
x86/fpu: Remove unused trace events
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Thomas Gleixner:
"Add the missing seq_file forward declaration in the timer namespace
header"
* tag 'timers-urgent-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timens: Add struct seq_file forward declaration
|
|
Add initial DMR support, which required smarter RAPL probe
Fix AMD MSR RAPL energy reporting
Add RAPL power limit configuration output
Minor fixes
Signed-off-by: Len Brown <len.brown@intel.com>
|
