| Age | Commit message (Collapse) | Author |
|---|
|
When tcf_block_get() fails inside atm_tc_init(),
atm_tc_put() is called to release the qdisc p->link.q.
But the flow->ref prevents it to do so, as the flow->ref
is still zero.
Fix this by moving the p->link.ref initialization before
tcf_block_get().
Fixes: 6529eaba33f0 ("net: sched: introduce tcf block infractructure")
Reported-and-tested-by: syzbot+d411cff6ab29cc2c311b@syzkaller.appspotmail.com
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
NVM config file address will be modified when the MBI image is upgraded.
Driver would return stale config values if user reads the nvm-config
(via ethtool -d) in this state. The fix is to re-populate nvm attribute
info while reading the nvm config values/partition.
Changes from previous version:
-------------------------------
v3: Corrected the formatting in 'Fixes' tag.
v2: Added 'Fixes' tag.
Fixes: 1ac4329a1cff ("qed: Add configuration information to register dump and debug data")
Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The HV/VREF should not turn off if the headphone jack plug-in.
This patch could solve the unexpected interrupt issue in some devices.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200709101345.11449-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In DSP_A mode, BIT7 of IFACE should bit 0 according to datasheet (ie.
inverted frame clock is not support in this mode).
Signed-off-by: Puyou Lu <puyou.lu@gmail.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/1593657056-4989-1-git-send-email-puyou.lu@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Clear BIT6 of INPPGA means not muted (Switch On).
Signed-off-by: Puyou Lu <puyou.lu@gmail.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/1593657025-4903-1-git-send-email-puyou.lu@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
It's impossible to debug shader hangs with soft recovery.
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
clang static analysis flags this error
drivers/gpu/drm/radeon/ci_dpm.c:5652:9: warning: Use of memory after it is freed [unix.Malloc]
kfree(rdev->pm.dpm.ps[i].ps_priv);
^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/radeon/ci_dpm.c:5654:2: warning: Attempt to free released memory [unix.Malloc]
kfree(rdev->pm.dpm.ps);
^~~~~~~~~~~~~~~~~~~~~~
problem is reported in ci_dpm_fini, with these code blocks.
for (i = 0; i < rdev->pm.dpm.num_ps; i++) {
kfree(rdev->pm.dpm.ps[i].ps_priv);
}
kfree(rdev->pm.dpm.ps);
The first free happens in ci_parse_power_table where it cleans up locally
on a failure. ci_dpm_fini also does a cleanup.
ret = ci_parse_power_table(rdev);
if (ret) {
ci_dpm_fini(rdev);
return ret;
}
So remove the cleanup in ci_parse_power_table and
move the num_ps calculation to inside the loop so ci_dpm_fini
will know how many array elements to free.
Fixes: cc8dbbb4f62a ("drm/radeon: add dpm support for CI dGPUs (v2)")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
RENOIR loads dmub fw not dmcu, check dmcu only will prevent loading iram,
it breaks backlight control.
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=208277
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
TMR is required to be destoried with GFX_CMD_ID_DESTROY_TMR while the
system goes to suspend. Otherwise, PSP may return the failure state
(0xFFFF007) on Gfx-2-PSP command GFX_CMD_ID_SETUP_TMR after do multiple
times suspend/resume.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Unload ASD function in suspend phase.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
btrfs implements the iter_write op and thus can use the more efficient
iov_iter based splice implementation. For now falling back to the less
efficient default is pretty harmless, but I have a pending series that
removes the default, and thus would cause btrfs to not support splice
at all.
Reported-by: Andy Lavr <andy.lavr@gmail.com>
Tested-by: Andy Lavr <andy.lavr@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20200707195214.GA3932@embeddedor
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Drop the doubled word "also".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
Link: https://lore.kernel.org/r/20200704034502.17199-16-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Link: https://lore.kernel.org/r/20200708184903.17350-1-grandmaster@al2klimov.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
While debugging a patch that I wrote I was hitting use-after-free panics
when accessing block groups on unmount. This turned out to be because
in the nocow case if we bail out of doing the nocow for whatever reason
we need to call btrfs_dec_nocow_writers() if we called the inc. This
puts our block group, but a few error cases does
if (nocow) {
btrfs_dec_nocow_writers();
goto error;
}
unfortunately, error is
error:
if (nocow)
btrfs_dec_nocow_writers();
so we get a double put on our block group. Fix this by dropping the
error cases calling of btrfs_dec_nocow_writers(), as it's handled at the
error label now.
Fixes: 762bf09893b4 ("btrfs: improve error handling in run_delalloc_nocow")
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When CONFIG_OF=n of_match_device() gets pre-processed out of existence
leaving qcom-smmu_client_of_match unused. Mark it as possibly unused to
keep the compiler from warning in that case.
Fixes: 0e764a01015d ("iommu/arm-smmu: Allow client devices to select direct mapping")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200604203905.31964-1-jcrouse@codeaurora.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Since ACPI_PTR() is used to NULLify the value when !CONFIG_ACPI,
struct usb_xhci_acpi_match becomes defined by unused.
Fixes the following W=1 kernel build warning(s):
drivers/usb/host/xhci-plat.c:457:36: warning: ‘usb_xhci_acpi_match’ defined but not used [-Wunused-const-variable=]
457 | static const struct acpi_device_id usb_xhci_acpi_match[] = {
| ^~~~~~~~~~~~~~~~~~~
Cc: Mathias Nyman <mathias.nyman@intel.com>
Cc: Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-33-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
'td' has been completely unused since the driver's inception in 2009.
Fixes the following W=1 kernel build warning(s):
drivers/usb/host/fhci-sched.c: In function ‘fhci_queue_urb’:
drivers/usb/host/fhci-sched.c:704:13: warning: variable ‘td’ set but not used [-Wunused-but-set-variable]
704 | struct td *td;
| ^~
Cc: Shlomi Gridish <gridish@freescale.com>
Cc: Jerry Huang <Chang-Ming.Huang@freescale.com>
Cc: Peter Barada <peterb@logicpd.com>
Cc: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-32-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Neither have been used since the driver's inception in 2009.
Fixes the following W=1 kernel build warning(s):
drivers/usb/host/fhci-tds.c: In function ‘fhci_flush_bds’:
drivers/usb/host/fhci-tds.c:472:6: warning: variable ‘buf’ set but not used [-Wunused-but-set-variable]
472 | u32 buf;
| ^~~
drivers/usb/host/fhci-tds.c:470:6: warning: variable ‘extra_data’ set but not used [-Wunused-but-set-variable]
470 | u16 extra_data;
| ^~~~~~~~~~
drivers/usb/host/fhci-tds.c: In function ‘fhci_flush_actual_frame’:
drivers/usb/host/fhci-tds.c:527:6: warning: variable ‘extra_data’ set but not used [-Wunused-but-set-variable]
527 | u16 extra_data;
| ^~~~~~~~~~
Cc: Shlomi Gridish <gridish@freescale.com>
Cc: Jerry Huang <Chang-Ming.Huang@freescale.com>
Cc: Peter Barada <peterb@logicpd.com>
Cc: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-31-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since ACPI_PTR() is used to NULLify the value when !CONFIG_ACPI,
struct dwc3_qcom_acpi_match becomes defined by unused.
Also need to place the platform data obtained via the matching process
inside the #ifdef, else that becomes unused too.
Fixes the following W=1 kernel build warning(s):
drivers/usb/dwc3/dwc3-qcom.c:761:36: warning: ‘dwc3_qcom_acpi_match’ defined but not used [-Wunused-const-variable=]
761 | static const struct acpi_device_id dwc3_qcom_acpi_match[] = {
| ^~~~~~~~~~~~~~~~~~~~
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: linux-arm-msm@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-30-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
!CONFIG_ACPI
Since ACPI_PTR() is used to NULLify the value when !CONFIG_ACPI,
struct ehci_acpi_match becomes defined by unused.
Fixes the following W=1 kernel build warning(s):
drivers/usb/host/ehci-platform.c:478:36: warning: ‘ehci_acpi_match’ defined but not used [-Wunused-const-variable=]
478 | static const struct acpi_device_id ehci_acpi_match[] = {
| ^~~~~~~~~~~~~~~
Cc: Tony Prisk <linux@prisktech.co.nz>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Steven Brown <sbrown@cortland.com>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: de Goede <hdegoede@redhat.com>
Cc: Michael Buesch <m@bues.ch>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-29-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Demote xhci-dbc's file header to a standard comment block.
Fixes the following W=1 kernel build warning(s):
drivers/usb/early/xhci-dbc.c:10: warning: Function parameter or member 'fmt' not described in 'pr_fmt'
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-28-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If the header file containing a function's prototype isn't included by
the sourcefile containing the associated function, the build system
complains of missing prototypes.
Fixes the following W=1 kernel build warning(s):
drivers/usb/early/ehci-dbgp.c: In function ‘early_dbgp_write’:
drivers/usb/early/ehci-dbgp.c:915:13: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
915 | int chunk, ret;
| ^~~
drivers/usb/early/xhci-dbc.c:600:12: warning: no previous prototype for ‘early_xdbc_parse_parameter’ [-Wmissing-prototypes]
600 | int __init early_xdbc_parse_parameter(char *s)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/usb/early/xhci-dbc.c:653:12: warning: no previous prototype for ‘early_xdbc_setup_hardware’ [-Wmissing-prototypes]
653 | int __init early_xdbc_setup_hardware(void)
| ^~~~~~~~~~~~~~~~~~~~~~~~~
drivers/usb/early/xhci-dbc.c:910:13: warning: no previous prototype for ‘early_xdbc_register_console’ [-Wmissing-prototypes]
910 | void __init early_xdbc_register_console(void)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/r/20200706133341.476881-27-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
'ret' hasn't been checked since the driver's inception in 2009.
Fixes the following W=1 kernel build warning(s):
drivers/usb/early/ehci-dbgp.c: In function ‘early_dbgp_write’:
drivers/usb/early/ehci-dbgp.c:915:13: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
915 | int chunk, ret;
| ^~~
Cc: Sumit Garg <sumit.garg@linaro.org>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Link: https://lore.kernel.org/r/20200706133341.476881-26-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
It isn't called from anywhere outside of ucsi.c.
Fixes the following W=1 kernel build warning(s):
drivers/usb/typec/ucsi/ucsi.c:1005:5: warning: no previous prototype for ‘ucsi_init’ [-Wmissing-prototypes]
1005 | int ucsi_init(struct ucsi *ucsi)
| ^~~~~~~~~
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-25-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/usb/gadget/udc/max3420_udc.c: In function ‘max3420_handle_setup’:
drivers/usb/gadget/udc/max3420_udc.c:626:5: warning: variable ‘addr’ set but not used [-Wunused-but-set-variable]
626 | u8 addr;
| ^~~~
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Jassi Brar <jaswinder.singh@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-24-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Looks like it's never been used. Driver was mainlined in 2014.
Fixes the following W=1 kernel build warning(s):
drivers/usb/gadget/udc/mv_u3d_core.c:35:19: warning: ‘driver_desc’ defined but not used [-Wunused-const-variable=]
35 | static const char driver_desc[] = DRIVER_DESC;
| ^~~~~~~~~~~
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Jason Yan <yanaijie@huawei.com>
Cc: Yu Xu <yuxu@marvell.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-23-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
comment blocks
Only 2 functions attempted to use kerneldoc in this massive file.
Fixes the following W=1 kernel build warning(s):
drivers/usb/host/fotg210-hcd.c: In function ‘fotg210_run’:
drivers/usb/host/fotg210-hcd.c:5013:6: warning: variable ‘hcc_params’ set but not used [-Wunused-but-set-variable]
drivers/usb/host/fotg210-hcd.c:5569: warning: Function parameter or member 'pdev' not described in 'fotg210_hcd_probe'
drivers/usb/host/fotg210-hcd.c:5666: warning: Function parameter or member 'pdev' not described in 'fotg210_hcd_remove'
drivers/usb/host/fotg210-hcd.c:5666: warning: Excess function parameter 'dev' description in 'fotg210_hcd_remove'
Cc: Yuan-Hsin Chen <yhchen@faraday-tech.com>
Cc: Feng-Hsin Chiang <john453@faraday-tech.com>
Cc: Po-Yu Chuang <ratbert.chuang@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-22-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
blocks
No attempt has been made to document either of the demoted functions here.
Fixes the following W=1 kernel build warning(s):
drivers/usb/host/bcma-hcd.c:180: warning: Function parameter or member 'usb_dev' not described in 'bcma_hcd_usb20_old_arm_init'
drivers/usb/host/bcma-hcd.c:268: warning: Function parameter or member 'bcma_hcd' not described in 'bcma_hcd_usb20_ns_init'
Cc: Chuhong Yuan <hslester96@gmail.com>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: Felix Fietkau <nbd@openwrt.org>
Cc: Michael Buesch <m@bues.ch>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-21-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
standard comment blocks
No attempt has been made to document any of the demoted functions here.
Fixes the following W=1 kernel build warning(s):
drivers/usb/gadget/function/u_uac1_legacy.c:30: warning: Function parameter or member 'i' not described in 'snd_interval_refine_set'
drivers/usb/gadget/function/u_uac1_legacy.c:30: warning: Function parameter or member 'val' not described in 'snd_interval_refine_set'
drivers/usb/gadget/function/u_uac1_legacy.c:93: warning: Function parameter or member 'snd' not described in 'playback_default_hw_params'
drivers/usb/gadget/function/u_uac1_legacy.c:153: warning: Function parameter or member 'card' not described in 'u_audio_playback'
drivers/usb/gadget/function/u_uac1_legacy.c:153: warning: Function parameter or member 'buf' not described in 'u_audio_playback'
drivers/usb/gadget/function/u_uac1_legacy.c:153: warning: Function parameter or member 'count' not described in 'u_audio_playback'
drivers/usb/gadget/function/u_uac1_legacy.c:197: warning: Function parameter or member 'card' not described in 'gaudio_open_snd_dev'
drivers/usb/gadget/function/u_uac1_legacy.c:257: warning: Function parameter or member 'gau' not described in 'gaudio_close_snd_dev'
drivers/usb/gadget/function/u_uac1_legacy.c:286: warning: Function parameter or member 'card' not described in 'gaudio_setup'
drivers/usb/gadget/function/u_uac1_legacy.c:303: warning: Function parameter or member 'the_card' not described in 'gaudio_cleanup'
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-20-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The result is actually read into fotg210->caps->hcc_params. No
need to popuate an unused varible with the unchecked return value
from fotg210_readl().
Fixes the following W=1 kernel build warning(s):
drivers/usb/host/fotg210-hcd.c: In function ‘fotg210_run’:
drivers/usb/host/fotg210-hcd.c:5013:6: warning: variable ‘hcc_params’ set but not used [-Wunused-but-set-variable]
5013 | u32 hcc_params;
| ^~~~~~~~~~
Cc: Yuan-Hsin Chen <yhchen@faraday-tech.com>
Cc: Feng-Hsin Chiang <john453@faraday-tech.com>
Cc: Po-Yu Chuang <ratbert.chuang@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-19-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/usb/host/ehci-fsl.c:694: warning: Function parameter or member 'pdev' not described in 'fsl_ehci_drv_remove'
drivers/usb/host/ehci-fsl.c:694: warning: Excess function parameter 'dev' description in 'fsl_ehci_drv_remove'
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Randy Vinson <rvinson@mvista.com>
Cc: Dave Liu <daveliu@freescale.com>
Cc: Jerry Huang <Chang-Ming.Huang@freescale.com>
Cc: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-18-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
No attempt has been made to document the demoted function here.
Fixes the following W=1 kernel build warning(s):
drivers/usb/host/imx21-hcd.c:233: warning: Function parameter or member 'imx21' not described in 'copy_to_dmem'
drivers/usb/host/imx21-hcd.c:233: warning: Function parameter or member 'dmem_offset' not described in 'copy_to_dmem'
drivers/usb/host/imx21-hcd.c:233: warning: Function parameter or member 'src' not described in 'copy_to_dmem'
drivers/usb/host/imx21-hcd.c:233: warning: Function parameter or member 'count' not described in 'copy_to_dmem'
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: Jay Monkman <jtm@lopingdog.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-17-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
issues
Ranging from missing descriptions and formatting mishaps to over-documenting
of missing arguments, likely due to bitrot.
Fixes the following W=1 kernel build warning(s):
drivers/usb/gadget/udc/pch_udc.c:239: warning: Function parameter or member 'request' not described in 'pch_udc_stp_dma_desc'
drivers/usb/gadget/udc/pch_udc.c:315: warning: Function parameter or member 'irq_work_fall' not described in 'pch_vbus_gpio_data'
drivers/usb/gadget/udc/pch_udc.c:315: warning: Function parameter or member 'irq_work_rise' not described in 'pch_vbus_gpio_data'
drivers/usb/gadget/udc/pch_udc.c:482: warning: Function parameter or member 'ep' not described in 'pch_udc_write_csr'
drivers/usb/gadget/udc/pch_udc.c:482: warning: Excess function parameter 'addr' description in 'pch_udc_write_csr'
drivers/usb/gadget/udc/pch_udc.c:498: warning: Function parameter or member 'ep' not described in 'pch_udc_read_csr'
drivers/usb/gadget/udc/pch_udc.c:498: warning: Excess function parameter 'addr' description in 'pch_udc_read_csr'
drivers/usb/gadget/udc/pch_udc.c:662: warning: Function parameter or member 'ep_in' not described in 'pch_udc_ep_set_bufsz'
drivers/usb/gadget/udc/pch_udc.c:977: warning: Function parameter or member 'ep' not described in 'pch_udc_ep_enable'
drivers/usb/gadget/udc/pch_udc.c:977: warning: Function parameter or member 'cfg' not described in 'pch_udc_ep_enable'
drivers/usb/gadget/udc/pch_udc.c:977: warning: Excess function parameter 'regs' description in 'pch_udc_ep_enable'
drivers/usb/gadget/udc/pch_udc.c:1010: warning: Function parameter or member 'ep' not described in 'pch_udc_ep_disable'
drivers/usb/gadget/udc/pch_udc.c:1010: warning: Excess function parameter 'regs' description in 'pch_udc_ep_disable'
drivers/usb/gadget/udc/pch_udc.c:1030: warning: Function parameter or member 'ep' not described in 'pch_udc_wait_ep_stall'
drivers/usb/gadget/udc/pch_udc.c:1030: warning: Excess function parameter 'dev' description in 'pch_udc_wait_ep_stall'
drivers/usb/gadget/udc/pch_udc.c:1341: warning: Function parameter or member 'data' not described in 'pch_vbus_gpio_irq'
drivers/usb/gadget/udc/pch_udc.c:1341: warning: Excess function parameter 'dev' description in 'pch_vbus_gpio_irq'
drivers/usb/gadget/udc/pch_udc.c:1365: warning: Function parameter or member 'vbus_gpio_port' not described in 'pch_vbus_gpio_init'
drivers/usb/gadget/udc/pch_udc.c:1510: warning: Function parameter or member 'dev' not described in 'pch_udc_free_dma_chain'
drivers/usb/gadget/udc/pch_udc.c:1510: warning: Function parameter or member 'req' not described in 'pch_udc_free_dma_chain'
drivers/usb/gadget/udc/pch_udc.c:1717: warning: Function parameter or member 'usbep' not described in 'pch_udc_pcd_ep_disable'
drivers/usb/gadget/udc/pch_udc.c:2006: warning: Excess function parameter 'halt' description in 'pch_udc_pcd_set_wedge'
drivers/usb/gadget/udc/pch_udc.c:2756: warning: Function parameter or member 'pdev' not described in 'pch_udc_isr'
drivers/usb/gadget/udc/pch_udc.c:2756: warning: Excess function parameter 'dev' description in 'pch_udc_isr'
drivers/usb/gadget/udc/pch_udc.c:2906: warning: Function parameter or member 'dev' not described in 'init_dma_pools'
drivers/usb/gadget/udc/pch_udc.c:2906: warning: Excess function parameter 'pdev' description in 'init_dma_pools'
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Chuhong Yuan <hslester96@gmail.com>
Cc: LAPIS Semiconductor <tomoya-linux@dsn.lapis-semi.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-16-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Looks as though it's never been used. Driver was introduced in 2014.
Fixes the following W=1 kernel build warning(s):
drivers/usb/gadget/udc/mv_udc_core.c:56:19: warning: ‘driver_desc’ defined but not used [-Wunused-const-variable=]
56 | static const char driver_desc[] = DRIVER_DESC;
| ^~~~~~~~~~~
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Chao Xie <chao.xie@marvell.com>
Cc: Neil Zhang <zhangwm@marvell.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-15-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
variable 'tmp'
Looks like it's been this way since the driver's inception in 2007.
Fixes the following W=1 kernel build warning(s):
drivers/usb/host/r8a66597-hcd.c: In function ‘clear_all_buffer’:
drivers/usb/host/r8a66597-hcd.c:478:6: warning: variable ‘tmp’ set but not used [-Wunused-but-set-variable]
478 | u16 tmp;
| ^~~
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-14-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
These are not used outside of this sourcefile, so make them static.
Fixes the following W=1 kernel build warning(s):
drivers/usb/gadget/udc/lpc32xx_udc.c:1929:6: warning: no previous prototype for ‘udc_send_in_zlp’ [-Wmissing-prototypes]
1929 | void udc_send_in_zlp(struct lpc32xx_udc *udc, struct lpc32xx_ep *ep)
| ^~~~~~~~~~~~~~~
drivers/usb/gadget/udc/lpc32xx_udc.c:1943:6: warning: no previous prototype for ‘udc_handle_eps’ [-Wmissing-prototypes]
1943 | void udc_handle_eps(struct lpc32xx_udc *udc, struct lpc32xx_ep *ep)
| ^~~~~~~~~~~~~~
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Sylvain Lemieux <slemieux.tyco@gmail.com>
Cc: Kevin Wells <kevin.wells@nxp.com>
Cc: Roland Stigge <stigge@antcom.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Link: https://lore.kernel.org/r/20200706133341.476881-13-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
kerneldoc
No attempt has been made to document the demoted function here.
Fixes the following W=1 kernel build warning(s):
drivers/usb/gadget/function/f_fs.c:2361: warning: Function parameter or member 'type' not described in '__ffs_data_do_os_desc'
drivers/usb/gadget/function/f_fs.c:2361: warning: Function parameter or member 'h' not described in '__ffs_data_do_os_desc'
drivers/usb/gadget/function/f_fs.c:2361: warning: Function parameter or member 'data' not described in '__ffs_data_do_os_desc'
drivers/usb/gadget/function/f_fs.c:2361: warning: Function parameter or member 'len' not described in '__ffs_data_do_os_desc'
drivers/usb/gadget/function/f_fs.c:2361: warning: Function parameter or member 'priv' not described in '__ffs_data_do_os_desc'
Cc: Felipe Balbi <balbi@kernel.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-12-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Looks as though it's never been used. Driver was introduced in 2010.
Fixes the following W=1 kernel build warning(s):
drivers/usb/gadget/legacy/nokia.c:65:19: warning: ‘product_nokia’ defined but not used [-Wunused-const-variable=]
65 | static const char product_nokia[] = NOKIA_LONG_NAME;
| ^~~~~~~~~~~~~
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Al Borchers <alborchers@steinerpoint.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-11-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit e78355b577c4b ("usb: gadget: udc: atmel: Don't use DT to
configure end point") pulled out all functionality dealing with 'pp'.
Fixes the following W=1 kernel build warning(s):
drivers/usb/gadget/udc/atmel_usba_udc.c: In function ‘atmel_udc_of_init’:
drivers/usb/gadget/udc/atmel_usba_udc.c:2106:22: warning: variable ‘pp’ set but not used [-Wunused-but-set-variable]
2106 | struct device_node *pp;
| ^~
Cc: Cristian Birsan <cristian.birsan@microchip.com>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-10-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/usb/misc/legousbtower.c:280: warning: Function parameter or member 'dev' not described in 'lego_usb_tower_debug_data'
drivers/usb/misc/legousbtower.c:280: warning: Function parameter or member 'function' not described in 'lego_usb_tower_debug_data'
drivers/usb/misc/legousbtower.c:280: warning: Function parameter or member 'size' not described in 'lego_usb_tower_debug_data'
drivers/usb/misc/legousbtower.c:280: warning: Function parameter or member 'data' not described in 'lego_usb_tower_debug_data'
Cc: Juergen Stuber <starblue@users.sourceforge.net>
Cc: David Glance <davidgsf@sourceforge.net>
Cc: david <david@csse.uwa.edu.au>
Cc: legousb-devel@lists.sourceforge.net
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-8-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Mostly bitrotted argument descriptions/names. Also the removal
of a blank line in the middle of a kerneldoc header, which is
not allowed.
Fixes the following W=1 kernel build warning(s):
drivers/usb/gadget/udc/pxa27x_udc.c:398: warning: Function parameter or member 'ep' not described in 'ep_write_UDCCSR'
drivers/usb/gadget/udc/pxa27x_udc.c:398: warning: Excess function parameter 'udc' description in 'ep_write_UDCCSR'
drivers/usb/gadget/udc/pxa27x_udc.c:479: warning: Function parameter or member 'udc' not described in 'set_ep0state'
drivers/usb/gadget/udc/pxa27x_udc.c:479: warning: Excess function parameter 'dev' description in 'set_ep0state'
drivers/usb/gadget/udc/pxa27x_udc.c:506: warning: Excess function parameter 'req' description in 'inc_ep_stats_reqs'
drivers/usb/gadget/udc/pxa27x_udc.c:1476: warning: bad line:
drivers/usb/gadget/udc/pxa27x_udc.c:1697: warning: Function parameter or member 'udc' not described in 'udc_enable'
drivers/usb/gadget/udc/pxa27x_udc.c:1697: warning: Excess function parameter 'dev' description in 'udc_enable'
drivers/usb/gadget/udc/pxa27x_udc.c:1750: warning: Function parameter or member 'g' not described in 'pxa27x_udc_start'
drivers/usb/gadget/udc/pxa27x_udc.c:1750: warning: Excess function parameter 'bind' description in 'pxa27x_udc_start'
drivers/usb/gadget/udc/pxa27x_udc.c:1784: warning: Excess function parameter 'driver' description in 'stop_activity'
drivers/usb/gadget/udc/pxa27x_udc.c:1800: warning: Function parameter or member 'g' not described in 'pxa27x_udc_stop'
drivers/usb/gadget/udc/pxa27x_udc.c:1800: warning: Excess function parameter 'driver' description in 'pxa27x_udc_stop'
drivers/usb/gadget/udc/pxa27x_udc.c:2358: warning: Function parameter or member 'pdev' not described in 'pxa_udc_probe'
drivers/usb/gadget/udc/pxa27x_udc.c:2358: warning: Excess function parameter '_dev' description in 'pxa_udc_probe'
Cc: Daniel Mack <daniel@zonque.org>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-7-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
make the mark
Kerneldoc expects all function arguments to be documented. If any
are missed it will complain. Downgrade one header with 3 missing
argument descriptions and one which makes no attempt.
Fixes the following W=1 kernel build warning(s):
drivers/usb/gadget/function/u_ether.c:750: warning: Function parameter or member 'dev_addr' not described in 'gether_setup_name'
drivers/usb/gadget/function/u_ether.c:750: warning: Function parameter or member 'host_addr' not described in 'gether_setup_name'
drivers/usb/gadget/function/u_ether.c:750: warning: Function parameter or member 'qmult' not described in 'gether_setup_name'
drivers/usb/gadget/function/u_ether.c:1022: warning: Function parameter or member 'dev' not described in 'gether_cleanup'
Cc: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-6-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/usb/gadget/udc/amd5536udc_pci.c:52:19: warning: ‘mod_desc’ defined but not used [-Wunused-const-variable=]
Cc: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-5-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/usb/gadget/legacy/printer.c:24:19: warning: ‘driver_desc’ defined but not used [-Wunused-const-variable=]
Cc: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-4-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
No attempt has been made to document any of the structure's properties here.
Fixes the following W=1 kernel build warning(s):
drivers/usb/chipidea/ci_hdrc_pci.c:132: warning: cannot understand function prototype: 'const struct pci_device_id ci_hdrc_pci_id_table[] = '
Cc: Peter Chen <Peter.Chen@nxp.com>
Cc: David Lopo <dlopo@chipidea.mips.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-3-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
comment blocks
No attempt has been made to document any of the demoted functions here.
Fixes the following W=1 kernel build warning(s):
drivers/usb/misc/legousbtower.c:280: warning: Function parameter or member 'dev' not described in 'lego_usb_tower_debug_data'
drivers/usb/misc/legousbtower.c:280: warning: Function parameter or member 'function' not described in 'lego_usb_tower_debug_data'
drivers/usb/misc/legousbtower.c:280: warning: Function parameter or member 'size' not described in 'lego_usb_tower_debug_data'
drivers/usb/misc/legousbtower.c:280: warning: Function parameter or member 'data' not described in 'lego_usb_tower_debug_data'
drivers/usb/misc/legousbtower.c:290: warning: Function parameter or member 'dev' not described in 'tower_delete'
drivers/usb/misc/legousbtower.c:306: warning: Function parameter or member 'inode' not described in 'tower_open'
drivers/usb/misc/legousbtower.c:306: warning: Function parameter or member 'file' not described in 'tower_open'
drivers/usb/misc/legousbtower.c:405: warning: Function parameter or member 'inode' not described in 'tower_release'
drivers/usb/misc/legousbtower.c:405: warning: Function parameter or member 'file' not described in 'tower_release'
drivers/usb/misc/legousbtower.c:452: warning: Function parameter or member 'dev' not described in 'tower_check_for_read_packet'
drivers/usb/misc/legousbtower.c:468: warning: Function parameter or member 'file' not described in 'tower_poll'
drivers/usb/misc/legousbtower.c:468: warning: Function parameter or member 'wait' not described in 'tower_poll'
drivers/usb/misc/legousbtower.c:494: warning: Function parameter or member 'file' not described in 'tower_llseek'
drivers/usb/misc/legousbtower.c:494: warning: Function parameter or member 'off' not described in 'tower_llseek'
drivers/usb/misc/legousbtower.c:494: warning: Function parameter or member 'whence' not described in 'tower_llseek'
drivers/usb/misc/legousbtower.c:503: warning: Function parameter or member 'file' not described in 'tower_read'
drivers/usb/misc/legousbtower.c:503: warning: Function parameter or member 'buffer' not described in 'tower_read'
drivers/usb/misc/legousbtower.c:503: warning: Function parameter or member 'count' not described in 'tower_read'
drivers/usb/misc/legousbtower.c:503: warning: Function parameter or member 'ppos' not described in 'tower_read'
drivers/usb/misc/legousbtower.c:587: warning: Function parameter or member 'file' not described in 'tower_write'
drivers/usb/misc/legousbtower.c:587: warning: Function parameter or member 'buffer' not described in 'tower_write'
drivers/usb/misc/legousbtower.c:587: warning: Function parameter or member 'count' not described in 'tower_write'
drivers/usb/misc/legousbtower.c:587: warning: Function parameter or member 'ppos' not described in 'tower_write'
drivers/usb/misc/legousbtower.c:669: warning: Function parameter or member 'urb' not described in 'tower_interrupt_in_callback'
drivers/usb/misc/legousbtower.c:724: warning: Function parameter or member 'urb' not described in 'tower_interrupt_out_callback'
drivers/usb/misc/legousbtower.c:752: warning: Function parameter or member 'interface' not described in 'tower_probe'
drivers/usb/misc/legousbtower.c:752: warning: Function parameter or member 'id' not described in 'tower_probe'
drivers/usb/misc/legousbtower.c:863: warning: Function parameter or member 'interface' not described in 'tower_disconnect'
Cc: Juergen Stuber <starblue@users.sourceforge.net>
Cc: David Glance <davidgsf@sourceforge.net>
Cc: david <david@csse.uwa.edu.au>
Cc: legousb-devel@lists.sourceforge.net
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-2-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In pci_disable_sriov(), i.e.,
# echo 0 > /sys/class/net/enp11s0f1np1/device/sriov_numvfs
iommu_release_device
iommu_group_remove_device
arm_smmu_domain_free
kfree(smmu_domain)
Later,
iommu_release_device
arm_smmu_release_device
arm_smmu_detach_dev
spin_lock_irqsave(&smmu_domain->devices_lock,
would trigger an use-after-free. Fixed it by call
arm_smmu_release_device() first before iommu_group_remove_device().
BUG: KASAN: use-after-free in __lock_acquire+0x3458/0x4440
__lock_acquire at kernel/locking/lockdep.c:4250
Read of size 8 at addr ffff0089df1a6f68 by task bash/3356
CPU: 5 PID: 3356 Comm: bash Not tainted 5.8.0-rc3-next-20200630 #2
Hardware name: HPE Apollo 70 /C01_APACHE_MB , BIOS L50_5.13_1.11 06/18/2019
Call trace:
dump_backtrace+0x0/0x398
show_stack+0x14/0x20
dump_stack+0x140/0x1b8
print_address_description.isra.12+0x54/0x4a8
kasan_report+0x134/0x1b8
__asan_report_load8_noabort+0x2c/0x50
__lock_acquire+0x3458/0x4440
lock_acquire+0x204/0xf10
_raw_spin_lock_irqsave+0xf8/0x180
arm_smmu_detach_dev+0xd8/0x4a0
arm_smmu_detach_dev at drivers/iommu/arm-smmu-v3.c:2776
arm_smmu_release_device+0xb4/0x1c8
arm_smmu_disable_pasid at drivers/iommu/arm-smmu-v3.c:2754
(inlined by) arm_smmu_release_device at drivers/iommu/arm-smmu-v3.c:3000
iommu_release_device+0xc0/0x178
iommu_release_device at drivers/iommu/iommu.c:302
iommu_bus_notifier+0x118/0x160
notifier_call_chain+0xa4/0x128
__blocking_notifier_call_chain+0x70/0xa8
blocking_notifier_call_chain+0x14/0x20
device_del+0x618/0xa00
pci_remove_bus_device+0x108/0x2d8
pci_stop_and_remove_bus_device+0x1c/0x28
pci_iov_remove_virtfn+0x228/0x368
sriov_disable+0x8c/0x348
pci_disable_sriov+0x5c/0x70
mlx5_core_sriov_configure+0xd8/0x260 [mlx5_core]
sriov_numvfs_store+0x240/0x318
dev_attr_store+0x38/0x68
sysfs_kf_write+0xdc/0x128
kernfs_fop_write+0x23c/0x448
__vfs_write+0x54/0xe8
vfs_write+0x124/0x3f0
ksys_write+0xe8/0x1b8
__arm64_sys_write+0x68/0x98
do_el0_svc+0x124/0x220
el0_sync_handler+0x260/0x408
el0_sync+0x140/0x180
Allocated by task 3356:
save_stack+0x24/0x50
__kasan_kmalloc.isra.13+0xc4/0xe0
kasan_kmalloc+0xc/0x18
kmem_cache_alloc_trace+0x1ec/0x318
arm_smmu_domain_alloc+0x54/0x148
iommu_group_alloc_default_domain+0xc0/0x440
iommu_probe_device+0x1c0/0x308
iort_iommu_configure+0x434/0x518
acpi_dma_configure+0xf0/0x128
pci_dma_configure+0x114/0x160
really_probe+0x124/0x6d8
driver_probe_device+0xc4/0x180
__device_attach_driver+0x184/0x1e8
bus_for_each_drv+0x114/0x1a0
__device_attach+0x19c/0x2a8
device_attach+0x10/0x18
pci_bus_add_device+0x70/0xf8
pci_iov_add_virtfn+0x7b4/0xb40
sriov_enable+0x5c8/0xc30
pci_enable_sriov+0x64/0x80
mlx5_core_sriov_configure+0x58/0x260 [mlx5_core]
sriov_numvfs_store+0x1c0/0x318
dev_attr_store+0x38/0x68
sysfs_kf_write+0xdc/0x128
kernfs_fop_write+0x23c/0x448
__vfs_write+0x54/0xe8
vfs_write+0x124/0x3f0
ksys_write+0xe8/0x1b8
__arm64_sys_write+0x68/0x98
do_el0_svc+0x124/0x220
el0_sync_handler+0x260/0x408
el0_sync+0x140/0x180
Freed by task 3356:
save_stack+0x24/0x50
__kasan_slab_free+0x124/0x198
kasan_slab_free+0x10/0x18
slab_free_freelist_hook+0x110/0x298
kfree+0x128/0x668
arm_smmu_domain_free+0xf4/0x1a0
iommu_group_release+0xec/0x160
kobject_put+0xf4/0x238
kobject_del+0x110/0x190
kobject_put+0x1e4/0x238
iommu_group_remove_device+0x394/0x938
iommu_release_device+0x9c/0x178
iommu_release_device at drivers/iommu/iommu.c:300
iommu_bus_notifier+0x118/0x160
notifier_call_chain+0xa4/0x128
__blocking_notifier_call_chain+0x70/0xa8
blocking_notifier_call_chain+0x14/0x20
device_del+0x618/0xa00
pci_remove_bus_device+0x108/0x2d8
pci_stop_and_remove_bus_device+0x1c/0x28
pci_iov_remove_virtfn+0x228/0x368
sriov_disable+0x8c/0x348
pci_disable_sriov+0x5c/0x70
mlx5_core_sriov_configure+0xd8/0x260 [mlx5_core]
sriov_numvfs_store+0x240/0x318
dev_attr_store+0x38/0x68
sysfs_kf_write+0xdc/0x128
kernfs_fop_write+0x23c/0x448
__vfs_write+0x54/0xe8
vfs_write+0x124/0x3f0
ksys_write+0xe8/0x1b8
__arm64_sys_write+0x68/0x98
do_el0_svc+0x124/0x220
el0_sync_handler+0x260/0x408
el0_sync+0x140/0x180
The buggy address belongs to the object at ffff0089df1a6e00
which belongs to the cache kmalloc-512 of size 512
The buggy address is located 360 bytes inside of
512-byte region [ffff0089df1a6e00, ffff0089df1a7000)
The buggy address belongs to the page:
page:ffffffe02257c680 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff0089df1a1400
flags: 0x7ffff800000200(slab)
raw: 007ffff800000200 ffffffe02246b8c8 ffffffe02257ff88 ffff000000320680
raw: ffff0089df1a1400 00000000002a000e 00000001ffffffff ffff0089df1a5001
page dumped because: kasan: bad access detected
page->mem_cgroup:ffff0089df1a5001
Memory state around the buggy address:
ffff0089df1a6e00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff0089df1a6e80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff0089df1a6f00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff0089df1a6f80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff0089df1a7000: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
Fixes: a6a4c7e2c5b8 ("iommu: Add probe_device() and release_device() call-backs")
Signed-off-by: Qian Cai <cai@lca.pw>
Link: https://lore.kernel.org/r/20200704001003.2303-1-cai@lca.pw
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
To 2.28
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Don't leak a reference to tlink during the NOTIFY ioctl
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
CC: Stable <stable@vger.kernel.org> # v5.6+
|
