summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-12-19Merge tag 'mac80211-for-davem-2018-12-19' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Just three fixes: * fix a memory leak in an error path * fix TXQs in interface teardown * free fraglist if we used it internally before returning SKB ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19m68k: Fix memblock-related crashesGeert Uytterhoeven
When running the kernel in Fast RAM on Atari: Ignoring memory chunk at 0x0:0xe00000 before the first chunk ... Unable to handle kernel NULL pointer dereference at virtual address (ptrval) Oops: 00000000 Modules linked in: PC: [<0069dbac>] free_all_bootmem+0x12c/0x186 SR: 2714 SP: (ptrval) a2: 005e3314 d0: 00000000 d1: 0000000a d2: 00000e00 d3: 00000000 d4: 005e1fc0 d5: 0000001a a0: 01000000 a1: 00000000 Process swapper (pid: 0, task=(ptrval)) Frame format=7 eff addr=00000736 ssw=0505 faddr=00000736 wb 1 stat/addr/data: 0000 00000000 00000000 wb 2 stat/addr/data: 0000 00000000 00000000 wb 3 stat/addr/data: 0000 00000736 00000000 push data: 00000000 00000000 00000000 00000000 Stack from 005e1f84: 00000000 0000000a 027d3260 006b5006 00000000 00000000 00000000 00000000 0004f062 0003a220 0069e272 005e1ff8 0000054c 00000000 00e00000 00000000 00000001 00693cd8 027d3260 0004f062 0003a220 00691be6 00000000 00000000 00000000 00000000 00000000 00000000 006b5006 00000000 00690872 Call Trace: [<0004f062>] printk+0x0/0x18 [<0003a220>] parse_args+0x0/0x2d4 [<0069e272>] memblock_virt_alloc_try_nid+0x0/0xa4 [<00693cd8>] mem_init+0xa/0x5c [<0004f062>] printk+0x0/0x18 [<0003a220>] parse_args+0x0/0x2d4 [<00691be6>] start_kernel+0x1ca/0x462 [<00690872>] _sinittext+0x872/0x11f8 Code: 7a1a eaae 2270 6db0 0061 ef14 2f01 2f03 <96a9> 0736 2203 e589 d681 e78b d6a9 0732 2f03 2f40 0034 4eb9 0069 b8d0 260e 4fef Disabling lock debugging due to kernel taint Kernel panic - not syncing: Attempted to kill the idle task! As the kernel must run in the memory chunk with the lowest address, ST-RAM is ignored, and removed from the m68k_memory[] array. However, it is not removed from memblock, causing a crash later. More investigation shows that there are 3 places where memory chunks are ignored, all after the calls to memblock_add() in m68k_parse_bootinfo(), and thus causing crashes: 1. On classic m68k CPUs with a MMU, paging_init() ignores all memory chunks below the first chunk, cfr. above, 2. On Amigas equipped with a Zorro III bus, config_amiga() ignores all Zorro II memory, 3. If CONFIG_SINGLE_MEMORY_CHUNK=y, m68k_parse_bootinfo() ignores all but the first memory chunk. Fix this by moving the calls to memblock_add() from m68k_parse_bootinfo() to paging_init(), after all ignored memory chunks have been removed from m68k_memory[]. Reported-by: Andreas Schwab <schwab@linux-m68k.org> Fixes: 1008a11590b966b4 ("m68k: switch to MEMBLOCK + NO_BOOTMEM") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2018-12-19dm: don't reuse bio for flushesJens Axboe
DM currently has a statically allocated bio that it uses to issue empty flushes. It doesn't submit this bio, it just uses it for maintaining state while setting up clones. Multiple users can access this bio at the same time. This wasn't previously an issue, even if it was a bit iffy, but with the blkg associations it can become one. We setup the blkg association, then clone bio's and submit, then remove the blkg assocation again. But since we can have multiple tasks doing this at the same time, against multiple blkg's, then we can either lose references to a blkg, or put it twice. The latter causes complaints on the percpu ref being <= 0 when released, and can cause use-after-free as well. Ming reports that xfstest generic/475 triggers this: ------------[ cut here ]------------ percpu ref (blkg_release) <= 0 (0) after switching to atomic WARNING: CPU: 13 PID: 0 at lib/percpu-refcount.c:155 percpu_ref_switch_to_atomic_rcu+0x2c9/0x4a0 Switch to just using an on-stack bio for this, and get rid of the embedded bio. Fixes: 5cdf2e3fea5e ("blkcg: associate blkg when associating a device") Reported-by: Ming Lei <ming.lei@redhat.com> Tested-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-19Merge branch 'nvme-4.21' of git://git.infradead.org/nvme into for-4.21/blockJens Axboe
Pull last batch of NVMe updates for 4.21 from Christoph: "This contains a series from Sagi to restore poll support for nvme-rdma, a new tracepoint from yupeng and various fixes." * 'nvme-4.21' of git://git.infradead.org/nvme: nvme-pci: trace SQ status on completions nvme-rdma: implement polling queue map nvme-fabrics: allow user to pass in nr_poll_queues nvme-fabrics: allow nvmf_connect_io_queue to poll nvme-core: optionally poll sync commands block: make request_to_qc_t public nvme-tcp: fix spelling mistake "attepmpt" -> "attempt" nvme-tcp: fix endianess annotations nvmet-tcp: fix endianess annotations nvme-pci: refactor nvme_poll_irqdisable to make sparse happy nvme-pci: only set nr_maps to 2 if poll queues are supported nvmet: use a macro for default error location nvmet: fix comparison of a u16 with -1
2018-12-20openrisc: Fix broken paths to arch/or32Geert Uytterhoeven
OpenRISC was mainlined as "openrisc", not "or32". vmlinux.lds is generated from vmlinux.lds.S. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Stafford Horne <shorne@gmail.com>
2018-12-20kbuild: fix false positive warning/error about missing libelfMasahiro Yamada
For the same reason as commit 25896d073d8a ("x86/build: Fix compiler support check for CONFIG_RETPOLINE"), you cannot put this $(error ...) into the parse stage of the top Makefile. Perhaps I'd propose a more sophisticated solution later, but this is the best I can do for now. Link: https://lkml.org/lkml/2017/12/25/211 Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com> Reported-by: Bernd Edlinger <bernd.edlinger@hotmail.de> Reported-by: Qian Cai <cai@lca.pw> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Tested-by: Qian Cai <cai@lca.pw>
2018-12-19sysfs: Disable lockdep for driver bind/unbind filesDaniel Vetter
This is the much more correct fix for my earlier attempt at: https://lkml.org/lkml/2018/12/10/118 Short recap: - There's not actually a locking issue, it's just lockdep being a bit too eager to complain about a possible deadlock. - Contrary to what I claimed the real problem is recursion on kn->count. Greg pointed me at sysfs_break_active_protection(), used by the scsi subsystem to allow a sysfs file to unbind itself. That would be a real deadlock, which isn't what's happening here. Also, breaking the active protection means we'd need to manually handle all the lifetime fun. - With Rafael we discussed the task_work approach, which kinda works, but has two downsides: It's a functional change for a lockdep annotation issue, and it won't work for the bind file (which needs to get the errno from the driver load function back to userspace). - Greg also asked why this never showed up: To hit this you need to unregister a 2nd driver from the unload code of your first driver. I guess only gpus do that. The bug has always been there, but only with a recent patch series did we add more locks so that lockdep built a chain from unbinding the snd-hda driver to the acpi_video_unregister call. Full lockdep splat: [12301.898799] ============================================ [12301.898805] WARNING: possible recursive locking detected [12301.898811] 4.20.0-rc7+ #84 Not tainted [12301.898815] -------------------------------------------- [12301.898821] bash/5297 is trying to acquire lock: [12301.898826] 00000000f61c6093 (kn->count#39){++++}, at: kernfs_remove_by_name_ns+0x3b/0x80 [12301.898841] but task is already holding lock: [12301.898847] 000000005f634021 (kn->count#39){++++}, at: kernfs_fop_write+0xdc/0x190 [12301.898856] other info that might help us debug this: [12301.898862] Possible unsafe locking scenario: [12301.898867] CPU0 [12301.898870] ---- [12301.898874] lock(kn->count#39); [12301.898879] lock(kn->count#39); [12301.898883] *** DEADLOCK *** [12301.898891] May be due to missing lock nesting notation [12301.898899] 5 locks held by bash/5297: [12301.898903] #0: 00000000cd800e54 (sb_writers#4){.+.+}, at: vfs_write+0x17f/0x1b0 [12301.898915] #1: 000000000465e7c2 (&of->mutex){+.+.}, at: kernfs_fop_write+0xd3/0x190 [12301.898925] #2: 000000005f634021 (kn->count#39){++++}, at: kernfs_fop_write+0xdc/0x190 [12301.898936] #3: 00000000414ef7ac (&dev->mutex){....}, at: device_release_driver_internal+0x34/0x240 [12301.898950] #4: 000000003218fbdf (register_count_mutex){+.+.}, at: acpi_video_unregister+0xe/0x40 [12301.898960] stack backtrace: [12301.898968] CPU: 1 PID: 5297 Comm: bash Not tainted 4.20.0-rc7+ #84 [12301.898974] Hardware name: Hewlett-Packard HP EliteBook 8460p/161C, BIOS 68SCF Ver. F.01 03/11/2011 [12301.898982] Call Trace: [12301.898989] dump_stack+0x67/0x9b [12301.898997] __lock_acquire+0x6ad/0x1410 [12301.899003] ? kernfs_remove_by_name_ns+0x3b/0x80 [12301.899010] ? find_held_lock+0x2d/0x90 [12301.899017] ? mutex_spin_on_owner+0xe4/0x150 [12301.899023] ? find_held_lock+0x2d/0x90 [12301.899030] ? lock_acquire+0x90/0x180 [12301.899036] lock_acquire+0x90/0x180 [12301.899042] ? kernfs_remove_by_name_ns+0x3b/0x80 [12301.899049] __kernfs_remove+0x296/0x310 [12301.899055] ? kernfs_remove_by_name_ns+0x3b/0x80 [12301.899060] ? kernfs_name_hash+0xd/0x80 [12301.899066] ? kernfs_find_ns+0x6c/0x100 [12301.899073] kernfs_remove_by_name_ns+0x3b/0x80 [12301.899080] bus_remove_driver+0x92/0xa0 [12301.899085] acpi_video_unregister+0x24/0x40 [12301.899127] i915_driver_unload+0x42/0x130 [i915] [12301.899160] i915_pci_remove+0x19/0x30 [i915] [12301.899169] pci_device_remove+0x36/0xb0 [12301.899176] device_release_driver_internal+0x185/0x240 [12301.899183] unbind_store+0xaf/0x180 [12301.899189] kernfs_fop_write+0x104/0x190 [12301.899195] __vfs_write+0x31/0x180 [12301.899203] ? rcu_read_lock_sched_held+0x6f/0x80 [12301.899209] ? rcu_sync_lockdep_assert+0x29/0x50 [12301.899216] ? __sb_start_write+0x13c/0x1a0 [12301.899221] ? vfs_write+0x17f/0x1b0 [12301.899227] vfs_write+0xb9/0x1b0 [12301.899233] ksys_write+0x50/0xc0 [12301.899239] do_syscall_64+0x4b/0x180 [12301.899247] entry_SYSCALL_64_after_hwframe+0x49/0xbe [12301.899253] RIP: 0033:0x7f452ac7f7a4 [12301.899259] Code: 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 80 00 00 00 00 8b 05 aa f0 2c 00 48 63 ff 85 c0 75 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 f3 c3 66 90 55 53 48 89 d5 48 89 f3 48 83 [12301.899273] RSP: 002b:00007ffceafa6918 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [12301.899282] RAX: ffffffffffffffda RBX: 000000000000000d RCX: 00007f452ac7f7a4 [12301.899288] RDX: 000000000000000d RSI: 00005612a1abf7c0 RDI: 0000000000000001 [12301.899295] RBP: 00005612a1abf7c0 R08: 000000000000000a R09: 00005612a1c46730 [12301.899301] R10: 000000000000000a R11: 0000000000000246 R12: 000000000000000d [12301.899308] R13: 0000000000000001 R14: 00007f452af4a740 R15: 000000000000000d Looking around I've noticed that usb and i2c already handle similar recursion problems, where a sysfs file can unbind the same type of sysfs somewhere else in the hierarchy. Relevant commits are: commit 356c05d58af05d582e634b54b40050c73609617b Author: Alan Stern <stern@rowland.harvard.edu> Date: Mon May 14 13:30:03 2012 -0400 sysfs: get rid of some lockdep false positives commit e9b526fe704812364bca07edd15eadeba163ebfb Author: Alexander Sverdlin <alexander.sverdlin@nsn.com> Date: Fri May 17 14:56:35 2013 +0200 i2c: suppress lockdep warning on delete_device Implement the same trick for driver bind/unbind. v2: Put the macro into bus.c (Greg). Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Ramalingam C <ramalingam.c@intel.com> Cc: Arend van Spriel <aspriel@gmail.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Bartosz Golaszewski <brgl@bgdev.pl> Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: Vivek Gautam <vivek.gautam@codeaurora.org> Cc: Joe Perches <joe@perches.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-19scripts: add a tool to produce a compile_commands.json fileTom Roeder
The LLVM/Clang project provides many tools for analyzing C source code. Many of these tools are based on LibTooling (https://clang.llvm.org/docs/LibTooling.html), which depends on a database of compiler flags. The standard container for this database is compile_commands.json, which consists of a list of JSON objects, each with "directory", "file", and "command" fields. Some build systems, like cmake or bazel, produce this compilation information directly. Naturally, Makefiles don't. However, the kernel makefiles already create .<target>.o.cmd files that contain all the information needed to build a compile_commands.json file. So, this commit adds scripts/gen_compile_commands.py, which recursively searches through a directory for .<target>.o.cmd files and extracts appropriate compile commands from them. It writes a compile_commands.json file that LibTooling-based tools can use. By default, gen_compile_commands.py starts its search in its working directory and (over)writes compile_commands.json in the working directory. However, it also supports --output and --directory flags for out-of-tree use. Note that while gen_compile_commands.py enables the use of clang-based tools, it does not require the kernel to be compiled with clang. E.g., the following sequence of commands produces a compile_commands.json file that works correctly with LibTooling. make defconfig make scripts/gen_compile_commands.py Also note that this script is written to work correctly in both Python 2 and Python 3, so it does not specify the Python version in its first line. For an example of the utility of this script: after running gen_compile_commands.json on the latest kernel version, I was able to use Vim + the YouCompleteMe pluging + clangd to automatically jump to definitions and declarations. Obviously, cscope and ctags provide some of this functionality; the advantage of supporting LibTooling is that it opens the door to many other clang-based tools that understand the code directly and do not rely on regular expressions and heuristics. Tested: Built several recent kernel versions and ran the script against them, testing tools like clangd (for editor/LSP support) and clang-check (for static analysis). Also extracted some test .cmd files from a kernel build and wrote a test script to check that the script behaved correctly with all permutations of the --output and --directory flags. Signed-off-by: Tom Roeder <tmroeder@google.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-19smb3: Fix rmdir compounding regression to strict serversRonnie Sahlberg
Some servers require that the setinfo matches the exact size, and in this case compounding changes introduced by commit c2e0fe3f5aae ("cifs: make rmdir() use compounding") caused us to send 8 bytes (padded length) instead of 1 byte (the size of the structure). See MS-FSCC section 2.4.11. Fixing this when we send a SET_INFO command for delete file disposition, then ends up as an iov of a single byte but this causes problems with SMB3 and encryption. To avoid this, instead of creating a one byte iov for the disposition value and then appending an additional iov with a 7 byte padding we now handle this as a single 8 byte iov containing both the disposition byte as well as the padding in one single buffer. Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> Acked-by: Paulo Alcantara <palcantara@suse.de>
2018-12-19ALSA: hda/realtek: Enable audio jacks of ASUS UX391UA with ALC294Wandrille RONCE
By default, there is no sound on Asus UX391UA on Linux. This patch adds sound support on Asus UX391UA. Tested working by three different users. The problem has also been described at https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1784485 Signed-off-by: Wandrille RONCE <w@ndrille.fr> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-12-19Bluetooth: Fix unnecessary error message for HCI request completionJohan Hedberg
In case a command which completes in Command Status was sent using the hci_cmd_send-family of APIs there would be a misleading error in the hci_get_cmd_complete function, since the code would be trying to fetch the Command Complete parameters when there are none. Avoid the misleading error and silently bail out from the function in case the received event is a command status. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-12-19ath10k: skip sending quiet mode cmd for WCN3990Rakesh Pillai
HL2.0 firmware does not support setting quiet mode. If the host driver sends the quiet mode setting command to the HL2.0 firmware, it crashes with the below signature. fatal error received: err_qdi.c:456:EX:wlan_process:1:WLAN RT:207a:PC=b001b4f0 The quiet mode command support is exposed by the firmware via thermal throttle wmi service. Enable ath10k thermal support if thermal throttle wmi service bit is set. 10.x firmware versions support this feature by default, but unfortunately do not advertise the support via service flags, hence have to manually set the service flag in ath10k_core_compat_services(). Tested on QCA988X with 10.2.4.70.9-2. Also tested on WCN3990. Co-developed-by: Govind Singh <govinds@codeaurora.org> Co-developed-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Rakesh Pillai <pillair@codeaurora.org> Signed-off-by: Govind Singh <govinds@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-19ALSA: bebob: fix model-id of unit for Apogee EnsembleTakashi Sakamoto
This commit fixes hard-coded model-id for an unit of Apogee Ensemble with a correct value. This unit uses DM1500 ASIC produced ArchWave AG (formerly known as BridgeCo AG). I note that this model supports three modes in the number of data channels in tx/rx streams; 8 ch pairs, 10 ch pairs, 18 ch pairs. The mode is switched by Vendor-dependent AV/C command, like: $ cd linux-firewire-utils $ ./firewire-request /dev/fw1 fcp 0x00ff000003dbeb0600000000 (8ch pairs) $ ./firewire-request /dev/fw1 fcp 0x00ff000003dbeb0601000000 (10ch pairs) $ ./firewire-request /dev/fw1 fcp 0x00ff000003dbeb0602000000 (18ch pairs) When switching between different mode, the unit disappears from IEEE 1394 bus, then appears on the bus with different combination of stream formats. In a mode of 18 ch pairs, available sampling rate is up to 96.0 kHz, else up to 192.0 kHz. $ ./hinawa-config-rom-printer /dev/fw1 { 'bus-info': { 'adj': False, 'bmc': True, 'chip_ID': 21474898341, 'cmc': True, 'cyc_clk_acc': 100, 'generation': 2, 'imc': True, 'isc': True, 'link_spd': 2, 'max_ROM': 1, 'max_rec': 512, 'name': '1394', 'node_vendor_ID': 987, 'pmc': False}, 'root-directory': [ ['HARDWARE_VERSION', 19], [ 'NODE_CAPABILITIES', { 'addressing': {'64': True, 'fix': True, 'prv': False}, 'misc': {'int': False, 'ms': False, 'spt': True}, 'state': { 'atn': False, 'ded': False, 'drq': True, 'elo': False, 'init': False, 'lst': True, 'off': False}, 'testing': {'bas': False, 'ext': False}}], ['VENDOR', 987], ['DESCRIPTOR', 'Apogee Electronics'], ['MODEL', 126702], ['DESCRIPTOR', 'Ensemble'], ['VERSION', 5297], [ 'UNIT', [ ['SPECIFIER_ID', 41005], ['VERSION', 65537], ['MODEL', 126702], ['DESCRIPTOR', 'Ensemble']]], [ 'DEPENDENT_INFO', [ ['SPECIFIER_ID', 2037], ['VERSION', 1], [(58, 'IMMEDIATE'), 16777159], [(59, 'IMMEDIATE'), 1048576], [(60, 'IMMEDIATE'), 16777159], [(61, 'IMMEDIATE'), 6291456]]]]} Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-12-19ALSA: emu10k1: Fix potential Spectre v1 vulnerabilitiesGustavo A. R. Silva
ipcm->substream is indirectly controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: sound/pci/emu10k1/emufx.c:1031 snd_emu10k1_ipcm_poke() warn: potential spectre issue 'emu->fx8010.pcm' [r] (local cap) sound/pci/emu10k1/emufx.c:1075 snd_emu10k1_ipcm_peek() warn: potential spectre issue 'emu->fx8010.pcm' [r] (local cap) Fix this by sanitizing ipcm->substream before using it to index emu->fx8010.pcm Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2 Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-12-19ALSA: rme9652: Fix potential Spectre v1 vulnerabilityGustavo A. R. Silva
info->channel is indirectly controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: sound/pci/rme9652/hdsp.c:4100 snd_hdsp_channel_info() warn: potential spectre issue 'hdsp->channel_map' [r] (local cap) Fix this by sanitizing info->channel before using it to index hdsp->channel_map Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. Also, notice that I refactored the code a bit in order to get rid of the following checkpatch warning: ERROR: do not use assignment in if condition FILE: sound/pci/rme9652/hdsp.c:4103: if ((mapped_channel = hdsp->channel_map[info->channel]) < 0) [1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2 Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-12-19HID: debug: Change to use DEFINE_SHOW_ATTRIBUTE macroYangtao Li
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-12-19serial: max310x: Fix tx_empty() callbackAlexander Shiyan
Function max310x_tx_empty() accesses the IRQSTS register, which is cleared by IC when reading, so if there is an interrupt status, we will lose it. This patch implement the transmitter check only by the current FIFO level. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-19Bluetooth: hci_bcm: Handle specific unknown packets after firmware loadingJonathan Bakker
The Broadcom controller on aries S5PV210 boards sends out a couple of unknown packets after the firmware is loaded. This will cause logging of errors such as: Bluetooth: hci0: Frame reassembly failed (-84) This is probably also the case with other boards, as there are related Android userspace patches for custom ROMs such as https://review.lineageos.org/#/c/LineageOS/android_system_bt/+/142721/ Since this appears to be intended behaviour, treated them as diagnostic packets. Note that this is another variant of commit 01d5e44ace8a ("Bluetooth: hci_bcm: Handle empty packet after firmware loading") Signed-off-by: Jonathan Bakker <xc-racer2@live.ca> Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-12-19Bluetooth: btbcm: Add entry for BCM4329B1 UART bluetoothPaweł Chmiel
This patch adds the device ID for the BCM 4329 combo module used in the Samsung Aries based phones (Galaxy S and it's variants). ``` [ 11.508980] Bluetooth: hci0: BCM: chip id 41 [ 11.518975] Bluetooth: hci0: BCM: features 0x04 [ 11.550132] Bluetooth: hci0: BCM4329B1 [ 11.557046] Bluetooth: hci0: BCM4329B1 (002.002.023) build 0000 [ 13.737071] Bluetooth: hci0: BCM4329B1 (002.002.023) build 0744 ``` Output from hciconfig ``` hci0: Type: Primary Bus: UART BD Address: 43:29:B1:55:00:00 ACL MTU: 1021:6 SCO MTU: 64:1 UP RUNNING RX bytes:1675 acl:0 sco:0 events:145 errors:0 TX bytes:20426 acl:0 sco:0 commands:146 errors:0 Features: 0xbf 0xfe 0x8f 0xfe 0x9b 0xff 0x79 0x83 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH SNIFF Link mode: SLAVE ACCEPT Name: 'aries' Class: 0x000000 Service Classes: Unspecified Device Class: Miscellaneous, HCI Version: 2.1 (0x4) Revision: 0x2e8 LMP Version: 2.1 (0x4) Subversion: 0x4217 Manufacturer: Broadcom Corporation (15) ``` Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-12-19drivers/regulator: fix a missing check of return valueKangjie Lu
If palmas_smps_read() fails, we should not use the read data in "reg" which may contain random value. The fix inserts a check for the return value of palmas_smps_read(): If it fails, we return the error code upstream and stop using "reg". Signed-off-by: Kangjie Lu <kjlu@umn.edu> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-12-19xfrm6_tunnel: Fix spi check in __xfrm6_tunnel_alloc_spiYueHaibing
gcc warn this: net/ipv6/xfrm6_tunnel.c:143 __xfrm6_tunnel_alloc_spi() warn: always true condition '(spi <= 4294967295) => (0-u32max <= u32max)' 'spi' is u32, which always not greater than XFRM6_TUNNEL_SPI_MAX because of wrap around. So the second forloop will never reach. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2018-12-19xfrm: policy: remove set but not used variable 'priority'YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: net/xfrm/xfrm_policy.c: In function 'xfrm_policy_lookup_bytype': net/xfrm/xfrm_policy.c:2079:6: warning: variable 'priority' set but not used [-Wunused-but-set-variable] It not used since commit 6be3b0db6db8 ("xfrm: policy: add inexact policy search tree infrastructure") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2018-12-19Revert "kbuild/Makefile: Prepare for using macros in inline assembly code to ↵Ingo Molnar
work around asm() related GCC inlining bugs" This reverts commit 77b0bf55bc675233d22cd5df97605d516d64525e. See this commit for details about the revert: e769742d3584 ("Revert "x86/jump-labels: Macrofy inline assembly code to work around GCC inlining bugs"") Conflicts: arch/x86/Makefile Reported-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Borislav Petkov <bp@alien8.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Juergen Gross <jgross@suse.com> Cc: Richard Biener <rguenther@suse.de> Cc: Kees Cook <keescook@chromium.org> Cc: Segher Boessenkool <segher@kernel.crashing.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Nadav Amit <namit@vmware.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-12-19Revert "x86/objtool: Use asm macros to work around GCC inlining bugs"Ingo Molnar
This reverts commit c06c4d8090513f2974dfdbed2ac98634357ac475. See this commit for details about the revert: e769742d3584 ("Revert "x86/jump-labels: Macrofy inline assembly code to work around GCC inlining bugs"") Reported-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Borislav Petkov <bp@alien8.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Juergen Gross <jgross@suse.com> Cc: Richard Biener <rguenther@suse.de> Cc: Kees Cook <keescook@chromium.org> Cc: Segher Boessenkool <segher@kernel.crashing.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Nadav Amit <namit@vmware.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-12-19Revert "x86/refcount: Work around GCC inlining bug"Ingo Molnar
This reverts commit 9e1725b410594911cc5981b6c7b4cea4ec054ca8. See this commit for details about the revert: e769742d3584 ("Revert "x86/jump-labels: Macrofy inline assembly code to work around GCC inlining bugs"") The conflict resolution for interaction with: 288e4521f0f6: ("x86/asm: 'Simplify' GEN_*_RMWcc() macros") was provided by Masahiro Yamada. Conflicts: arch/x86/include/asm/refcount.h Reported-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Borislav Petkov <bp@alien8.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Juergen Gross <jgross@suse.com> Cc: Richard Biener <rguenther@suse.de> Cc: Kees Cook <keescook@chromium.org> Cc: Segher Boessenkool <segher@kernel.crashing.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Nadav Amit <namit@vmware.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-12-19Revert "x86/alternatives: Macrofy lock prefixes to work around GCC inlining ↵Ingo Molnar
bugs" This reverts commit 77f48ec28e4ccff94d2e5f4260a83ac27a7f3099. See this commit for details about the revert: e769742d3584 ("Revert "x86/jump-labels: Macrofy inline assembly code to work around GCC inlining bugs"") Reported-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Borislav Petkov <bp@alien8.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Juergen Gross <jgross@suse.com> Cc: Richard Biener <rguenther@suse.de> Cc: Kees Cook <keescook@chromium.org> Cc: Segher Boessenkool <segher@kernel.crashing.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Nadav Amit <namit@vmware.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-12-19Revert "x86/bug: Macrofy the BUG table section handling, to work around GCC ↵Ingo Molnar
inlining bugs" This reverts commit f81f8ad56fd1c7b99b2ed1c314527f7d9ac447c6. See this commit for details about the revert: e769742d3584 ("Revert "x86/jump-labels: Macrofy inline assembly code to work around GCC inlining bugs"") Reported-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Borislav Petkov <bp@alien8.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Juergen Gross <jgross@suse.com> Cc: Richard Biener <rguenther@suse.de> Cc: Kees Cook <keescook@chromium.org> Cc: Segher Boessenkool <segher@kernel.crashing.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Nadav Amit <namit@vmware.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-12-19Revert "x86/paravirt: Work around GCC inlining bugs when compiling paravirt ops"Ingo Molnar
This reverts commit 494b5168f2de009eb80f198f668da374295098dd. See this commit for details about the revert: e769742d3584 ("Revert "x86/jump-labels: Macrofy inline assembly code to work around GCC inlining bugs"") Reported-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Borislav Petkov <bp@alien8.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Juergen Gross <jgross@suse.com> Cc: Richard Biener <rguenther@suse.de> Cc: Kees Cook <keescook@chromium.org> Cc: Segher Boessenkool <segher@kernel.crashing.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Nadav Amit <namit@vmware.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-12-19Revert "x86/extable: Macrofy inline assembly code to work around GCC ↵Ingo Molnar
inlining bugs" This reverts commit 0474d5d9d2f7f3b11262f7bf87d0e7314ead9200. See this commit for details about the revert: e769742d3584 ("Revert "x86/jump-labels: Macrofy inline assembly code to work around GCC inlining bugs"") Reported-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Borislav Petkov <bp@alien8.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Juergen Gross <jgross@suse.com> Cc: Richard Biener <rguenther@suse.de> Cc: Kees Cook <keescook@chromium.org> Cc: Segher Boessenkool <segher@kernel.crashing.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Nadav Amit <namit@vmware.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-12-19Revert "x86/cpufeature: Macrofy inline assembly code to work around GCC ↵Ingo Molnar
inlining bugs" This reverts commit d5a581d84ae6b8a4a740464b80d8d9cf1e7947b2. See this commit for details about the revert: e769742d3584 ("Revert "x86/jump-labels: Macrofy inline assembly code to work around GCC inlining bugs"") Reported-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Borislav Petkov <bp@alien8.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Juergen Gross <jgross@suse.com> Cc: Richard Biener <rguenther@suse.de> Cc: Kees Cook <keescook@chromium.org> Cc: Segher Boessenkool <segher@kernel.crashing.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Nadav Amit <namit@vmware.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-12-19Revert "x86/jump-labels: Macrofy inline assembly code to work around GCC ↵Ingo Molnar
inlining bugs" This reverts commit 5bdcd510c2ac9efaf55c4cbd8d46421d8e2320cd. The macro based workarounds for GCC's inlining bugs caused regressions: distcc and other distro build setups broke, and the fixes are not easy nor will they solve regressions on already existing installations. So we are reverting this patch and the 8 followup patches. What makes this revert easier is that GCC9 will likely include the new 'asm inline' syntax that makes inlining of assembly blocks a lot more robust. This is a superior method to any macro based hackeries - and might even be backported to GCC8, which would make all modern distros get the inlining fixes as well. Many thanks to Masahiro Yamada and others for helping sort out these problems. Reported-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Borislav Petkov <bp@alien8.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Juergen Gross <jgross@suse.com> Cc: Richard Biener <rguenther@suse.de> Cc: Kees Cook <keescook@chromium.org> Cc: Segher Boessenkool <segher@kernel.crashing.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Nadav Amit <namit@vmware.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-12-19EDAC, fsl_ddr: Add LS1021A to the list of supported hardwarePatrick Havelange
The Freescale ddr driver also works on the LS1021A board. Signed-off-by: Patrick Havelange <patrick.havelange@essensium.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: York Sun <york.sun@nxp.com> Cc: arnout.vandecappelle@essensium.com Cc: linux-edac <linux-edac@vger.kernel.org> Cc: matthew.weber@rockwellcollins.com Cc: patrick.havelange@essensium.com Link: https://lkml.kernel.org/r/20181219104323.10324-1-patrick.havelange@essensium.com
2018-12-19Merge branch 'clockevents/4.21' of ↵Thomas Gleixner
http://git.linaro.org/people/daniel.lezcano/linux into timers/core Pull clockevents/source update from Daniel Lezcano: - Add dt-bindings for RDA8810PL SoC (Manivannan Sadhasivam)
2018-12-19genirq/affinity: Add is_managed to struct irq_affinity_descDou Liyang
Devices which use managed interrupts usually have two classes of interrupts: - Interrupts for multiple device queues - Interrupts for general device management Currently both classes are treated the same way, i.e. as managed interrupts. The general interrupts get the default affinity mask assigned while the device queue interrupts are spread out over the possible CPUs. Treating the general interrupts as managed is both a limitation and under certain circumstances a bug. Assume the following situation: default_irq_affinity = 4..7 So if CPUs 4-7 are offlined, then the core code will shut down the device management interrupts because the last CPU in their affinity mask went offline. It's also a limitation because it's desired to allow manual placement of the general device interrupts for various reasons. If they are marked managed then the interrupt affinity setting from both user and kernel space is disabled. That limitation was reported by Kashyap and Sumit. Expand struct irq_affinity_desc with a new bit 'is_managed' which is set for truly managed interrupts (queue interrupts) and cleared for the general device interrupts. [ tglx: Simplify code and massage changelog ] Reported-by: Kashyap Desai <kashyap.desai@broadcom.com> Reported-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Dou Liyang <douliyangs@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-pci@vger.kernel.org Cc: shivasharan.srikanteshwara@broadcom.com Cc: ming.lei@redhat.com Cc: hch@lst.de Cc: bhelgaas@google.com Cc: douliyang1@huawei.com Link: https://lkml.kernel.org/r/20181204155122.6327-3-douliyangs@gmail.com
2018-12-19genirq/core: Introduce struct irq_affinity_descDou Liyang
The interrupt affinity management uses straight cpumask pointers to convey the automatically assigned affinity masks for managed interrupts. The core interrupt descriptor allocation also decides based on the pointer being non NULL whether an interrupt is managed or not. Devices which use managed interrupts usually have two classes of interrupts: - Interrupts for multiple device queues - Interrupts for general device management Currently both classes are treated the same way, i.e. as managed interrupts. The general interrupts get the default affinity mask assigned while the device queue interrupts are spread out over the possible CPUs. Treating the general interrupts as managed is both a limitation and under certain circumstances a bug. Assume the following situation: default_irq_affinity = 4..7 So if CPUs 4-7 are offlined, then the core code will shut down the device management interrupts because the last CPU in their affinity mask went offline. It's also a limitation because it's desired to allow manual placement of the general device interrupts for various reasons. If they are marked managed then the interrupt affinity setting from both user and kernel space is disabled. To remedy that situation it's required to convey more information than the cpumasks through various interfaces related to interrupt descriptor allocation. Instead of adding yet another argument, create a new data structure 'irq_affinity_desc' which for now just contains the cpumask. This struct can be expanded to convey auxilliary information in the next step. No functional change, just preparatory work. [ tglx: Simplified logic and clarified changelog ] Suggested-by: Thomas Gleixner <tglx@linutronix.de> Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Dou Liyang <douliyangs@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-pci@vger.kernel.org Cc: kashyap.desai@broadcom.com Cc: shivasharan.srikanteshwara@broadcom.com Cc: sumit.saxena@broadcom.com Cc: ming.lei@redhat.com Cc: hch@lst.de Cc: douliyang1@huawei.com Link: https://lkml.kernel.org/r/20181204155122.6327-2-douliyangs@gmail.com
2018-12-19genirq/affinity: Remove excess indentationThomas Gleixner
Plus other coding style issues which stood out while staring at that code. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2018-12-19PCI: uniphier: Add UniPhier PCIe host controller supportKunihiko Hayashi
This introduces specific glue layer for UniPhier platform to support PCIe host controller that is based on the DesignWare PCIe core, and this driver supports Root Complex (host) mode. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2018-12-19dt-bindings: PCI: Add UniPhier PCIe host controller descriptionKunihiko Hayashi
Add DT bindings for PCIe controller implemented in UniPhier SoCs when configured in Root Complex (host) mode. This controller is based on the DesignWare PCIe core. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org>
2018-12-19PCI: amlogic: Add the Amlogic Meson PCIe controller driverYue Wang
The Amlogic Meson PCIe host controller is based on the Synopsys DesignWare PCI core. This patch adds the driver support for Meson PCIe controller. Link: https://lore.kernel.org/linux-pci/20181218224708.GB22610@google.com/ Signed-off-by: Yue Wang <yue.wang@amlogic.com> Signed-off-by: Hanjie Lin <hanjie.lin@amlogic.com> [lorenzo.pieralisi@arm.com: updated coding/comment style] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2018-12-19dt-bindings: PCI: meson: add DT bindings for Amlogic Meson PCIe controllerYue Wang
The Amlogic Meson PCIe host controller is based on the Synopsys DesignWare PCI core. This patch adds documentation for the DT bindings in Meson PCIe controller. Signed-off-by: Yue Wang <yue.wang@amlogic.com> Signed-off-by: Hanjie Lin <hanjie.lin@amlogic.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org>
2018-12-19dt-bindings: serial: sh-sci: Document r8a774c0 bindingsFabrizio Castro
RZ/G2E (R8A774C0) SoC also has the R-Car Gen3 compatible SCIF and HSCIF ports, so document the SoC specific bindings. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-19dt-bindings: serial: sh-sci: Document r8a774a1 bindingsFabrizio Castro
RZ/G2M (R8A774A1) SoC also has the R-Car Gen3 compatible SCIF and HSCIF ports, so document the SoC specific bindings. While at it, update the RZ/G1 and RZ/G2 family specific strings description as outdated. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-19dt-bindings: timer: Document RDA8810PL SoC timerManivannan Sadhasivam
Document RDA Micro RDA8810PL SoC timer. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2018-12-19Fonts: New Terminus large console fontAmanoel Dawod
This patch adds an option to compile-in a high resolution and large Terminus (ter16x32) bitmap console font for use with HiDPI and Retina screens. The font was convereted from standard Terminus ter-i32b.psf (size 16x32) with the help of psftools and minor hand editing deleting useless characters. This patch is non-intrusive, no options are enabled by default so most users won't notice a thing. I am placing my changes under the GPL 2.0 just as source Terminus font. Signed-off-by: Amanoel Dawod <amanoeladawod@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-19staging: android: ashmem: doc: Fix spellingDaniel Bovensiepen
Fixed spelling in comment section. Signed-off-by: Daniel Bovensiepen <daniel@bovensiepen.net> Acked-by: Joel Fernandes (Google) <joel@joelfernandes.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-19char: lp: use new parport device modelSudip Mukherjee
Modify lp driver to use the new parallel port device model. Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-19char: lp: properly count the lp devicesSudip Mukherjee
When the parallel port is usb based and the lp attaches to it based on LP_PARPORT_AUTO, we do get /dev/lp0 and when we remove the usb device /dev/lp0 is unregistered. If we now reconnect the usb device we get our /dev/lp0 back. But if we now disconnect and reconnect eight times we donot get any lp device and dmesg shows: lp: ignoring parallel port (max. 8) Decrement the lp_count when the device detaches as this represents the number of lp devices connected to the system. Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-19char: lp: use first unused lp number while registeringSudip Mukherjee
When the parallel port is usb based and the lp attaches to it based on LP_PARPORT_AUTO, we do get /dev/lp0 and when we remove the usb device /dev/lp0 is unregistered. But if we now reconnect the usb device we get /dev/lp1, another disconnection and reconnection and we get /dev/lp2. Use the port number array to find the first unused lp number and use that to register the lp device with the parallel port. Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-19char: lp: detach the device when parallel port is removedSudip Mukherjee
When the parallel port is usb based and the lp attaches to it, we do get /dev/lp0, but when we remove the usb device and the parallel port is gone, we are still left with /dev/lp0. Unregister the device properly in the detach routine based on the port number it has connected to. Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-19char: lp: introduce list to save port numberSudip Mukherjee
When we are registering lp in LP_PARPORT_AUTO mode, we are not keeping any record of the parallel port number to which lp is connecting. Add an array to save the port number to it. Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-20 14:07:43 +0000