| Age | Commit message (Collapse) | Author |
|---|
|
A regression was introduced with the implementation of single-master
mode, preventing proper stop conditions from being generated. Devices
that require a valid stop condition, such as EEPROMs, fail to function
correctly as a result.
The issue only affects devices with the single-master property enabled.
This commit resolves the issue by re-enabling I2C bus busy bit (IBB)
polling for single-master mode when generating a stop condition. The fix
further ensures that the i2c_imx->stopped flag is cleared at the start
of each transfer, allowing the stop condition to be correctly generated
in i2c_imx_stop().
According to the reference manual (IMX8MMRM, Rev. 2, 09/2019, page
5270), polling the IBB bit to determine if the bus is free is only
necessary in multi-master mode. Consequently, the IBB bit is not polled
for the start condition in single-master mode.
Fixes: 6692694aca86 ("i2c: imx: do not poll for bus busy in single master mode")
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20241216151829.74056-1-eichest@gmail.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
The PHY portion of the mediatek hdmi driver was originally part of
the driver it self and later split out into drivers/phy, which a
'select' to keep the prior behavior.
However, this leads to build failures when the PHY driver cannot
be built:
WARNING: unmet direct dependencies detected for PHY_MTK_HDMI
Depends on [n]: (ARCH_MEDIATEK || COMPILE_TEST [=y]) && COMMON_CLK [=y] && OF [=y] && REGULATOR [=n]
Selected by [m]:
- DRM_MEDIATEK_HDMI [=m] && HAS_IOMEM [=y] && DRM [=m] && DRM_MEDIATEK [=m]
ERROR: modpost: "devm_regulator_register" [drivers/phy/mediatek/phy-mtk-hdmi-drv.ko] undefined!
ERROR: modpost: "rdev_get_drvdata" [drivers/phy/mediatek/phy-mtk-hdmi-drv.ko] undefined!
The best option here is to just not select the phy driver and leave that
up to the defconfig. Do the same for the other PHY and memory drivers
selected here as well for consistency.
Fixes: a481bf2f0ca4 ("drm/mediatek: Separate mtk_hdmi_phy to an independent module")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20241218085837.2670434-1-arnd@kernel.org/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
mediatek-drm driver reported the capability of 180-degree rotation by
adding `DRM_MODE_ROTATE_180` to the plane property, as flip-x combined
with flip-y equals a 180-degree rotation. However, we did not handle
the rotation property in the driver and lead to rotation issues.
Fixes: 74608d8feefd ("drm/mediatek: Add DRM_MODE_ROTATE_0 to rotation property")
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20241118025126.30808-1-jason-jh.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
Touching DISP_REG_OVL_PITCH_MSB leads to video overlay on MT2701, MT7623N
and probably other older SoCs being broken.
Move setting up AFBC layer configuration into a separate function only
being called on hardware which actually supports AFBC which restores the
behavior as it was before commit c410fa9b07c3 ("drm/mediatek: Add AFBC
support to Mediatek DRM driver") on non-AFBC hardware.
Fixes: c410fa9b07c3 ("drm/mediatek: Add AFBC support to Mediatek DRM driver")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/c7fbd3c3e633c0b7dd6d1cd78ccbdded31e1ca0f.1734397800.git.daniel@makrotopia.org/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
mtk_crtc_finish_page_flip() is used to notify userspace that a
page flip has been completed, allowing userspace to free the frame
buffer of the last frame and commit the next frame.
In MediaTek's hardware design for configuring display hardware by using
GCE, `DRM_EVENT_FLIP_COMPLETE` should be notified to userspace after
GCE has finished configuring all display hardware settings for each
atomic_commit().
Currently, mtk_crtc_finish_page_flip() cannot guarantee that GCE has
configured all the display hardware settings of the last frame.
Therefore, to increase the accuracy of the timing for notifying
`DRM_EVENT_FLIP_COMPLETE` to userspace, mtk_crtc_finish_page_flip()
should be moved to ddp_cmdq_cb().
Fixes: 7f82d9c43879 ("drm/mediatek: Clear pending flag when cmdq packet is done")
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20241211034716.29241-1-jason-jh.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
returns err
The pointer need to be set to NULL, otherwise KASAN complains about
use-after-free. Because in mtk_drm_bind, all private's drm are set
as follows.
private->all_drm_private[i]->drm = drm;
And drm will be released by drm_dev_put in case mtk_drm_kms_init returns
failure. However, the shutdown path still accesses the previous allocated
memory in drm_atomic_helper_shutdown.
[ 84.874820] watchdog: watchdog0: watchdog did not stop!
[ 86.512054] ==================================================================
[ 86.513162] BUG: KASAN: use-after-free in drm_atomic_helper_shutdown+0x33c/0x378
[ 86.514258] Read of size 8 at addr ffff0000d46fc068 by task shutdown/1
[ 86.515213]
[ 86.515455] CPU: 1 UID: 0 PID: 1 Comm: shutdown Not tainted 6.13.0-rc1-mtk+gfa1a78e5d24b-dirty #55
[ 86.516752] Hardware name: Unknown Product/Unknown Product, BIOS 2022.10 10/01/2022
[ 86.517960] Call trace:
[ 86.518333] show_stack+0x20/0x38 (C)
[ 86.518891] dump_stack_lvl+0x90/0xd0
[ 86.519443] print_report+0xf8/0x5b0
[ 86.519985] kasan_report+0xb4/0x100
[ 86.520526] __asan_report_load8_noabort+0x20/0x30
[ 86.521240] drm_atomic_helper_shutdown+0x33c/0x378
[ 86.521966] mtk_drm_shutdown+0x54/0x80
[ 86.522546] platform_shutdown+0x64/0x90
[ 86.523137] device_shutdown+0x260/0x5b8
[ 86.523728] kernel_restart+0x78/0xf0
[ 86.524282] __do_sys_reboot+0x258/0x2f0
[ 86.524871] __arm64_sys_reboot+0x90/0xd8
[ 86.525473] invoke_syscall+0x74/0x268
[ 86.526041] el0_svc_common.constprop.0+0xb0/0x240
[ 86.526751] do_el0_svc+0x4c/0x70
[ 86.527251] el0_svc+0x4c/0xc0
[ 86.527719] el0t_64_sync_handler+0x144/0x168
[ 86.528367] el0t_64_sync+0x198/0x1a0
[ 86.528920]
[ 86.529157] The buggy address belongs to the physical page:
[ 86.529972] page: refcount:0 mapcount:0 mapping:0000000000000000 index:0xffff0000d46fd4d0 pfn:0x1146fc
[ 86.531319] flags: 0xbfffc0000000000(node=0|zone=2|lastcpupid=0xffff)
[ 86.532267] raw: 0bfffc0000000000 0000000000000000 dead000000000122 0000000000000000
[ 86.533390] raw: ffff0000d46fd4d0 0000000000000000 00000000ffffffff 0000000000000000
[ 86.534511] page dumped because: kasan: bad access detected
[ 86.535323]
[ 86.535559] Memory state around the buggy address:
[ 86.536265] ffff0000d46fbf00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 86.537314] ffff0000d46fbf80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 86.538363] >ffff0000d46fc000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 86.544733] ^
[ 86.551057] ffff0000d46fc080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 86.557510] ffff0000d46fc100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 86.563928] ==================================================================
[ 86.571093] Disabling lock debugging due to kernel taint
[ 86.577642] Unable to handle kernel paging request at virtual address e0e9c0920000000b
[ 86.581834] KASAN: maybe wild-memory-access in range [0x0752049000000058-0x075204900000005f]
...
Fixes: 1ef7ed48356c ("drm/mediatek: Modify mediatek-drm for mt8195 multi mmsys support")
Signed-off-by: Guoqing Jiang <guoqing.jiang@canonical.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20241223023227.1258112-1-guoqing.jiang@canonical.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
When using type-c to type-c to connect to the monitor,
the sound plays normally. If you unplug the type-c and
connect the type-c to hdmi dongle to the monitor, there will be noise.
By capturing the audio data, it is found that
the data position is messy, and there is no error in the data.
Through experiments, it can be restored by resetting the SDP path
when unplugging it.
Signed-off-by: Liankun Yang <liankun.yang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20241128023733.16294-1-liankun.yang@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
The product names for the Framework Laptop (12th and 13th Generation
Intel Core) are incorrect as of 62be134abf42.
Fixes: 62be134abf42 ("platform/chrome: cros_ec_lpc: switch primary DMI data for Framework Laptop")
Cc: stable@vger.kernel.org # 6.12.x
Signed-off-by: Dustin L. Howett <dustin@howett.net>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241224-platform-chrome-cros_ec_lpc-fix-product-identity-for-early-framework-laptops-v1-1-0d31d6e1d22c@howett.net
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
|
|
The dsp_local_on selftest expects the scheduler to fail by trying to
schedule an e.g. CPU-affine task to the wrong CPU. However, this isn't
guaranteed to happen in the 1 second window that the test is running.
Besides, it's odd to have this particular exception path tested when there
are no other tests that verify that the interface is working at all - e.g.
the test would pass if dsp_local_on interface is completely broken and fails
on any attempt.
Flip the test so that it verifies that the feature works. While at it, fix a
typo in the info message.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Ihor Solodrai <ihor.solodrai@pm.me>
Link: http://lkml.kernel.org/r/Z1n9v7Z6iNJ-wKmq@slm.duckdns.org
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Access to genmask field in struct nft_set_ext results in unaligned
atomic read:
[ 72.130109] Unable to handle kernel paging request at virtual address ffff0000c2bb708c
[ 72.131036] Mem abort info:
[ 72.131213] ESR = 0x0000000096000021
[ 72.131446] EC = 0x25: DABT (current EL), IL = 32 bits
[ 72.132209] SET = 0, FnV = 0
[ 72.133216] EA = 0, S1PTW = 0
[ 72.134080] FSC = 0x21: alignment fault
[ 72.135593] Data abort info:
[ 72.137194] ISV = 0, ISS = 0x00000021, ISS2 = 0x00000000
[ 72.142351] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 72.145989] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 72.150115] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000237d27000
[ 72.154893] [ffff0000c2bb708c] pgd=0000000000000000, p4d=180000023ffff403, pud=180000023f84b403, pmd=180000023f835403,
+pte=0068000102bb7707
[ 72.163021] Internal error: Oops: 0000000096000021 [#1] SMP
[...]
[ 72.170041] CPU: 7 UID: 0 PID: 54 Comm: kworker/7:0 Tainted: G E 6.13.0-rc3+ #2
[ 72.170509] Tainted: [E]=UNSIGNED_MODULE
[ 72.170720] Hardware name: QEMU QEMU Virtual Machine, BIOS edk2-stable202302-for-qemu 03/01/2023
[ 72.171192] Workqueue: events_power_efficient nft_rhash_gc [nf_tables]
[ 72.171552] pstate: 21400005 (nzCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
[ 72.171915] pc : nft_rhash_gc+0x200/0x2d8 [nf_tables]
[ 72.172166] lr : nft_rhash_gc+0x128/0x2d8 [nf_tables]
[ 72.172546] sp : ffff800081f2bce0
[ 72.172724] x29: ffff800081f2bd40 x28: ffff0000c2bb708c x27: 0000000000000038
[ 72.173078] x26: ffff0000c6780ef0 x25: ffff0000c643df00 x24: ffff0000c6778f78
[ 72.173431] x23: 000000000000001a x22: ffff0000c4b1f000 x21: ffff0000c6780f78
[ 72.173782] x20: ffff0000c2bb70dc x19: ffff0000c2bb7080 x18: 0000000000000000
[ 72.174135] x17: ffff0000c0a4e1c0 x16: 0000000000003000 x15: 0000ac26d173b978
[ 72.174485] x14: ffffffffffffffff x13: 0000000000000030 x12: ffff0000c6780ef0
[ 72.174841] x11: 0000000000000000 x10: ffff800081f2bcf8 x9 : ffff0000c3000000
[ 72.175193] x8 : 00000000000004be x7 : 0000000000000000 x6 : 0000000000000000
[ 72.175544] x5 : 0000000000000040 x4 : ffff0000c3000010 x3 : 0000000000000000
[ 72.175871] x2 : 0000000000003a98 x1 : ffff0000c2bb708c x0 : 0000000000000004
[ 72.176207] Call trace:
[ 72.176316] nft_rhash_gc+0x200/0x2d8 [nf_tables] (P)
[ 72.176653] process_one_work+0x178/0x3d0
[ 72.176831] worker_thread+0x200/0x3f0
[ 72.176995] kthread+0xe8/0xf8
[ 72.177130] ret_from_fork+0x10/0x20
[ 72.177289] Code: 54fff984 d503201f d2800080 91003261 (f820303f)
[ 72.177557] ---[ end trace 0000000000000000 ]---
Align struct nft_set_ext to word size to address this and
documentation it.
pahole reports that this increases the size of elements for rhash and
pipapo in 8 bytes on x86_64.
Fixes: 7ffc7481153b ("netfilter: nft_set_hash: skip duplicated elements pending gc run")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
struct bpf_iter_scx_dsq *it maybe not initialized.
If we didn't call scx_bpf_dsq_move_set_vtime and scx_bpf_dsq_move_set_slice
before scx_bpf_dsq_move, it would cause unexpected behaviors:
1. Assign a huge slice into p->scx.slice
2. Assign a invalid vtime into p->scx.dsq_vtime
Signed-off-by: Henry Huang <henry.hj@antgroup.com>
Fixes: 6462dd53a260 ("sched_ext: Compact struct bpf_iter_scx_dsq_kern")
Cc: stable@vger.kernel.org # v6.12
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Add support for allocating the concurrent writeback mux as part of the
WB allocation
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/629238/
Link: https://lore.kernel.org/r/20241216-concurrent-wb-v4-14-fe220297a7f0@quicinc.com
|
|
Adjust the WB_MUX configuration to account for using dedicated CWB
pingpong blocks.
Signed-off-by: Esha Bharadwaj <quic_ebharadw@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/629248/
Link: https://lore.kernel.org/r/20241216-concurrent-wb-v4-13-fe220297a7f0@quicinc.com
|
|
The CWB mux has its own registers and set of operations. Add dpu_hw_cwb
abstraction to allow driver to configure the CWB mux.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/629254/
Link: https://lore.kernel.org/r/20241216-concurrent-wb-v4-12-fe220297a7f0@quicinc.com
[DB: added #include <linux/bitfield.h>]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Fix a compiler warning with W=1:
kernel/workqueue.c: error:
function ‘__alloc_workqueue’ might be a candidate for ‘gnu_printf’
format attribute[-Werror=suggest-attribute=format]
5657 | name_len = vsnprintf(wq->name, sizeof(wq->name), fmt, args);
| ^~~~~~~~
Fixes: 9b59a85a84dc ("workqueue: Don't call va_start / va_end twice")
Signed-off-by: Su Hui <suhui@nfschina.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Implement instance of snapshot function to dump new registers used
for cwb
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Esha Bharadwaj <quic_ebharadw@quicinc.com>
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/629221/
Link: https://lore.kernel.org/r/20241216-concurrent-wb-v4-11-fe220297a7f0@quicinc.com
|
|
Change pingpong index and names to distinguish between general use
pingpong blocks and pingpong blocks dedicated for concurrent writeback
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/629229/
Link: https://lore.kernel.org/r/20241216-concurrent-wb-v4-10-fe220297a7f0@quicinc.com
|
|
Add a new block for concurrent writeback mux to the SM8650 HW catalog
Signed-off-by: Esha Bharadwaj <quic_ebharadw@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/629219/
Link: https://lore.kernel.org/r/20241216-concurrent-wb-v4-9-fe220297a7f0@quicinc.com
|
|
The struct dpu_rm_requirements was used to wrap display topology and
hw resources, which meant INTF indices. As of commit ef58e0ad3436
("drm/msm/dpu: get INTF blocks directly rather than through RM") the hw
resources struct was removed, leaving struct dpu_rm_requirements
containing a single field (topology). Remove the useless wrapper.
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
[DB: dropped stray msm_drv.h inclusion]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/629259/
Link: https://lore.kernel.org/r/20241216-concurrent-wb-v4-5-fe220297a7f0@quicinc.com
|
|
Correct c&p error from the conversion of LCDC regulators to the bulk
API.
Fixes: 54f1fbcb47d4 ("drm/msm/mdp4: use bulk regulators API for LCDC encoder")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/590412/
Link: https://lore.kernel.org/r/20240420-mdp4-fixes-v1-3-96a70f64fa85@linaro.org
|
|
MSM display drivers provide kms structure allocated during probe().
Don't clean up priv->kms field in case of an error. Otherwise probe
functions might fail after KMS probe deferral.
Fixes: a2ab5d5bb6b1 ("drm/msm: allow passing struct msm_kms to msm_drv_probe()")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Fixes: 506efcba3129 ("drm/msm: carve out KMS code from msm_drv.c")
Patchwork: https://patchwork.freedesktop.org/patch/590411/
Link: https://lore.kernel.org/r/20240420-mdp4-fixes-v1-1-96a70f64fa85@linaro.org
|
|
Because the of_dma_configure() will returns '-EPROBE_DEFER' if the probe
procedure of the specific platform IOMMU driver is not finished yet. It
can also return other error code for various reasons.
Stop pretending that it will always suceess, quit if it fail.
Signed-off-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Fixes: 29ac8979cdf7 ("drm/msm/a6xx: use msm_gem for GMU memory objects")
Fixes: 5a903a44a984 ("drm/msm/a6xx: Introduce GMU wrapper support")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/622782/
Link: https://lore.kernel.org/r/20241104090738.529848-1-sui.jingfeng@linux.dev
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Add myself as maintainer for dp controller yaml as to support
review of the incoming changes.
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/626921/
Link: https://lore.kernel.org/r/20241202-dp_mst_bindings-v1-4-9a9a43b0624a@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Passing a variable string as a printf style format is potentially
dangerous that -Wformat-security can warn about if enabled. A new
instance just got added:
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c: In function 'dpu_kms_mdp_snapshot':
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c:1046:49: error: format not a string literal and no format arguments [-Werror=format-security]
1046 | vbif->name);
| ~~~~^~~~~~
Fix this one and the preexisting -Wformat-security warnings the in the
DRM code for snapdragon.
Fixes: 1a40bb31fcf1 ("drm/msm/dpu: Add VBIF to DPU snapshot") # and others
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/629126/
Link: https://lore.kernel.org/r/20241216083319.1838449-1-arnd@kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull mtd fixes from Miquel Raynal:
"Four minor fixes for NAND controller drivers (cleanup path, double
actions, and W=1 warning) as well as a cast to avoid overflows in an
mtd device driver"
* tag 'mtd/fixes-for-6.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: rawnand: omap2: Fix build warnings with W=1
mtd: rawnand: arasan: Fix missing de-registration of NAND
mtd: rawnand: arasan: Fix double assertion of chip-select
mtd: diskonchip: Cast an operand to prevent potential overflow
mtd: rawnand: fix double free in atmel_pmecc_create_user()
|
|
The driver no longer builds when regulator support is unavailable:
arm-linux-gnueabi-ld: drivers/phy/mediatek/phy-mtk-hdmi.o: in function `mtk_hdmi_phy_register_regulators':
phy-mtk-hdmi.c:(.text.unlikely+0x3e): undefined reference to `devm_regulator_register'
arm-linux-gnueabi-ld: drivers/phy/mediatek/phy-mtk-hdmi-mt8195.o: in function `mtk_hdmi_phy_pwr5v_is_enabled':
phy-mtk-hdmi-mt8195.c:(.text+0x326): undefined reference to `rdev_get_drvdata'
arm-linux-gnueabi-ld: drivers/phy/mediatek/phy-mtk-hdmi-mt8195.o: in function `mtk_hdmi_phy_pwr5v_disable':
phy-mtk-hdmi-mt8195.c:(.text+0x346): undefined reference to `rdev_get_drvdata'
arm-linux-gnueabi-ld: drivers/phy/mediatek/phy-mtk-hdmi-mt8195.o: in function `mtk_hdmi_phy_pwr5v_enable':
Fixes: 49393b2da1cd ("phy: mediatek: phy-mtk-hdmi: Register PHY provided regulator")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241213083056.2596499-1-arnd@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The Kernel test robot returns the following warning:
do_div() does a 64-by-32 division, please consider using div64_ul instead.
To prevent the 64-by-32 divsion, consolidate both the multiplication
and the do_div into one line which explicitly uses u64 sizes.
Fixes: 1951dbb41d1d ("phy: freescale: fsl-samsung-hdmi: Support dynamic integer")
Signed-off-by: Adam Ford <aford173@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202412091243.fSObwwPi-lkp@intel.com/
Link: https://lore.kernel.org/r/20241215220555.99113-1-aford173@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
For macro for_each_child_of_node(parent, child), refcount of @child has
been increased before entering its loop body, so normally needs to call
of_node_put(@child) before returning from the loop body to avoid refcount
leakage.
of_phy_provider_lookup() has such usage but does not call of_node_put()
before returning, so cause leakage of the OF node refcount.
Fix by simply calling of_node_put() before returning from the loop body.
The APIs affected by this issue are shown below since they indirectly
invoke problematic of_phy_provider_lookup().
phy_get()
of_phy_get()
devm_phy_get()
devm_of_phy_get()
devm_of_phy_get_by_index()
Fixes: 2a4c37016ca9 ("phy: core: Fix of_phy_provider_lookup to return PHY provider for sub node")
Cc: stable@vger.kernel.org
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20241213-phy_core_fix-v6-5-40ae28f5015a@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
_of_phy_get() will directly return when suffers of_device_is_compatible()
error, but it forgets to decrease refcount of OF node @args.np before error
return, the refcount was increased by previous of_parse_phandle_with_args()
so causes the OF node's refcount leakage.
Fix by decreasing the refcount via of_node_put() before the error return.
Fixes: b7563e2796f8 ("phy: work around 'phys' references to usb-nop-xceiv devices")
Cc: stable@vger.kernel.org
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20241213-phy_core_fix-v6-4-40ae28f5015a@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
For devm_phy_destroy(), its comment says it needs to invoke phy_destroy()
to destroy the phy, but it will not actually invoke the function since
devres_destroy() does not call devm_phy_consume(), and the missing
phy_destroy() call will cause that the phy fails to be destroyed.
Fortunately, the faulty API has not been used by current kernel tree.
Fix by using devres_release() instead of devres_destroy() within the API.
Fixes: ff764963479a ("drivers: phy: add generic PHY framework")
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20241213-phy_core_fix-v6-3-40ae28f5015a@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
unregister the phy provider
For devm_of_phy_provider_unregister(), its comment says it needs to invoke
of_phy_provider_unregister() to unregister the phy provider, but it will
not actually invoke the function since devres_destroy() does not call
devm_phy_provider_release(), and the missing of_phy_provider_unregister()
call will cause:
- The phy provider fails to be unregistered.
- Leak both memory and the OF node refcount.
Fortunately, the faulty API has not been used by current kernel tree.
Fix by using devres_release() instead of devres_destroy() within the API.
Fixes: ff764963479a ("drivers: phy: add generic PHY framework")
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/stable/20241213-phy_core_fix-v6-2-40ae28f5015a%40quicinc.com
Link: https://lore.kernel.org/r/20241213-phy_core_fix-v6-2-40ae28f5015a@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
For devm_phy_put(), its comment says it needs to invoke phy_put() to
release the phy, but it will not actually invoke the function since
devres_destroy() does not call devm_phy_release(), and the missing
phy_put() call will cause:
- The phy fails to be released.
- devm_phy_put() can not fully undo what API devm_phy_get() does.
- Leak refcount of both the module and device for below typical usage:
devm_phy_get(); // or its variant
...
err = do_something();
if (err)
goto err_out;
...
err_out:
devm_phy_put(); // leak refcount here
The file(s) affected by this issue are shown below since they have such
typical usage.
drivers/pci/controller/cadence/pcie-cadence.c
drivers/net/ethernet/ti/am65-cpsw-nuss.c
Fix by using devres_release() instead of devres_destroy() within the API.
Fixes: ff764963479a ("drivers: phy: add generic PHY framework")
Cc: stable@vger.kernel.org
Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: Krzysztof Wilczyński <kw@linux.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20241213-phy_core_fix-v6-1-40ae28f5015a@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Currently, the driver does not return the correct DMA status when a DMA
pause is issued by the client drivers. This causes GPCDMA users to
assume that DMA is still running, while in reality, the DMA is paused.
Return DMA_PAUSED for tx_status() if the channel is paused in the middle
of a transfer.
Fixes: ee17028009d4 ("dmaengine: tegra: Add tegra gpcdma driver")
Cc: stable@vger.kernel.org
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Signed-off-by: Kartik Rajput <kkartik@nvidia.com>
Link: https://lore.kernel.org/r/20241212124412.5650-1-kkartik@nvidia.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The for_each_child_of_node() loop requires explicit calls to
of_node_put() to decrement the child's refcount upon early exits (break,
goto, return).
Add the missing calls in the two early exits before the goto
instructions.
Cc: stable@vger.kernel.org
Fixes: f7d12ef53ddf ("dma: mv_xor: add Device Tree binding")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20241011-dma_mv_xor_of_node_put-v1-1-3c2de819f463@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The link.{min/max}_bpp_x16 is already set in crtc_state, use that while
computing link config for MST.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241217093244.3938132-15-ankit.k.nautiyal@intel.com
|
|
The helper intel_dp_compute_config_link_bpp_limits is the correct place
to set the DSC link limits. Move the code to this function and remove
the #TODO item.
v2: Add argument intel_connector to the helper to get correct connector
for DP MST. (Imre)
v3: Remove redundant calls to intel_dp_dsc_sink_max_compressed_bpp as
its already accounted while setting link bpp limits.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241217093244.3938132-14-ankit.k.nautiyal@intel.com
|
|
Modify the dsc helpers to get max/min compressed bpp to accept
`const struct intel_crtc_state *` pointers instead of
`struct intel_crtc_state *`.
These helpers are not supposed to modify `crtc_state`.
Accepting const pointers will allow these helpers to be called from
functions that have const pointer to crtc_state.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241217093244.3938132-13-ankit.k.nautiyal@intel.com
|
|
Currently to get the max pipe_bpp with dsc we take the min of
limits->pipe.max_bpp and dsc max bpp (dsc max bpc * 3). This can result
in problems when limits->pipe.max_bpp is less than the computed dsc min bpp
(dsc min bpc * 3).
Replace the min/max functions with clamp while computing
limits->pipe.max/min_bpp to ensure that the pipe_bpp limits are constrained
within the DSC-defined minimum and maximum values.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241217093244.3938132-12-ankit.k.nautiyal@intel.com
|
|
The dsc limits->pipe.max/min_bpp are already set in
intel_dp_compute_config_limits.
Use the limits while computing the link config with DSC for MST.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241217093244.3938132-11-ankit.k.nautiyal@intel.com
|
|
With DSC there are additional limits for pipe_bpp. Currently these are
scattered in different places.
Instead set the limits->pipe.max/min_bpp in one place and use them
wherever required.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241217093244.3938132-10-ankit.k.nautiyal@intel.com
|
|
Currently we are including both max_requested_bpc and
limits->pipe.bpp_max while computing maximum possible pipe bpp with dsc.
However, while setting limits->pipe.max_bpp, the max_requested_bpc is
already taken into account.
Drop the redundant check for max_requested_bpc and use only
limits->pipe.bpp_max. This will also result in dropping conn_state
argument in functions where it was used only to get max_requested_bpc.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241217093244.3938132-9-ankit.k.nautiyal@intel.com
|
|
Use helpers for source min/max input bpc with DSC.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241217093244.3938132-8-ankit.k.nautiyal@intel.com
|
|
Use ints for dsc_max/min_bpc instead of u8 in
dsc_max/min_src_input_bpc helpers and their callers.
This will also help replace min_t/max_t macros with min/max ones.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241217093244.3938132-7-ankit.k.nautiyal@intel.com
|
|
DSC support is already checked before the helper
intel_dp_dsc_max_src_input_bpc is called.
Remove the check from the helper.
v2: Drop the argument struct drm_i915_private *i915. (Suraj)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241217093244.3938132-6-ankit.k.nautiyal@intel.com
|
|
Support for FEC is already checked by intel_dp_supports_dsc() in
intel_dp_dsc_compute_config() which gets called before
intel_dp_fec_compute_config().
Therefore the check can be dropped from the helper
intel_dp_fec_compute_config().
v2: Changed commit message for clarity. (Suraj)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241217093244.3938132-5-ankit.k.nautiyal@intel.com
|
|
Make a separate function for setting fec_enable in crtc_state.
v2: Rename helper to align with encoder->compute_config() callback
and other minor fixes. (Jani)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241217093244.3938132-4-ankit.k.nautiyal@intel.com
|
|
Check for DSC support before computing link config with DSC.
For DP MST we are already doing the same.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241217093244.3938132-3-ankit.k.nautiyal@intel.com
|
|
Forward Error Correction is required for DP if we are using DSC but
is optional for eDP.
Currently the helper intel_dp_supports_dsc checks if fec_enable is set for
DP or not. The helper is called after fec_enable is set in crtc_state.
Instead of this a better approach would be to:
first, call intel_dp_supports_dsc to check for DSC support
(along with FEC requirement for DP) and then set fec_enable for DP
(if not already set) in crtc_state.
To achieve this, remove the check for fec_enable in the helper and instead
check for FEC support for DP. With this change the helper
intel_dp_supports_dsc can be called earlier and return early if DSC is
not supported. The structure intel_dp is added to the helper to get the
FEC support for DP.
v2: Pass intel_dp to adjust_limits_for_dsc_hblank_expansion_quirk
instead of deriving it from connector. (Jani)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241217093244.3938132-2-ankit.k.nautiyal@intel.com
|
|
sub-pipe PG is not present on DG1. Setting these bits can disable
other power gates and cause GPU hangs on video playbacks.
VLK: 16314, 4304
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13381
Fixes: 85a12d7eb8fe ("drm/i915/tgl: Fix Media power gate sequence.")
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241219210019.70532-1-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit de7061947b4ed4be857d452c60d5fb795831d79e)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
|
|
According to spec VDR_CUSTOM_WIDTH register gets programmed after pll
specific VDR registers and TX Lane programming registers are done.
Moreover we only program into C10_VDR_CONTROL1 to update config and
setup master lane once all VDR registers are written into.
Bspec: 67636
Fixes: 51390cc0e00a ("drm/i915/mtl: Add Support for C10 PHY message bus and pll programming")
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241216181554.2861381-1-suraj.kandpal@intel.com
(cherry picked from commit f9d418552ba1e3a0e92487ff82eb515dab7516c0)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
|
