| Age | Commit message (Collapse) | Author |
|---|
|
The u32 variable pci_dword is being masked with 0x1fffffff and then left
shifted 23 places. The shift is a u32 operation,so a value of 0x200 or
more in pci_dword will overflow the u32 and only the bottow 32 bits
are assigned to addr. I don't believe this was the original intent.
Fix this by casting pci_dword to a resource_size_t to ensure no
overflow occurs.
Note that the mask and 12 bit left shift operation does not need this
because the mask SNR_IMC_MMIO_MEM0_MASK and shift is always a 32 bit
value.
Fixes: ee49532b38dd ("perf/x86/intel/uncore: Add IMC uncore support for Snow Ridge")
Addresses-Coverity: ("Unintentional integer overflow")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20210706114553.28249-1-colin.king@canonical.com
|
|
and TX error counters
This patch fixes the interchanged fetch of the CAN RX and TX error
counters from the ESD_EV_CAN_ERROR_EXT message. The RX error counter
is really in struct rx_msg::data[2] and the TX error counter is in
struct rx_msg::data[3].
Fixes: 96d8e90382dc ("can: Add driver for esd CAN-USB/2 device")
Link: https://lore.kernel.org/r/20210825215227.4947-2-stefan.maetje@esd.eu
Cc: stable@vger.kernel.org
Signed-off-by: Stefan Mätje <stefan.maetje@esd.eu>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
drivers/net/usb/asix_devices.c:757:60-65: WARNING: conversion to bool not needed here
Remove unneeded conversion to bool
Semantic patch information:
Relational and logical operators evaluate to bool,
explicit conversion is overly verbose and unneeded.
Generated by: scripts/coccinelle/misc/boolconv.cocci
Fixes: 7a141e64cf14 ("net: usb: asix: ax88772: move embedded PHY detection as early as possible")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: kernel test robot <lkp@intel.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20210825183538.13070-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If the attempt to reserve a slot fails, we currently leak the XPT_BUSY
flag on the socket. Among other things, this make it impossible to close
the socket.
Fixes: 82011c80b3ec ("SUNRPC: Move svc_xprt_received() call sites")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Merge fixes from Andrew Morton:
"2 patches.
Subsystems affected by this patch series: mm/memory-hotplug and
MAINTAINERS"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
MAINTAINERS: exfat: update my email address
mm/memory_hotplug: fix potential permanent lru cache disable
|
|
My email address in exfat entry will be not available in a few days.
Update it to my own kernel.org address.
Link: https://lkml.kernel.org/r/20210825044833.16806-1-namjae.jeon@samsung.com
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
If offline_pages failed after lru_cache_disable(), it forgot to do
lru_cache_enable() in error path. So we would have lru cache disabled
permanently in this case.
Link: https://lkml.kernel.org/r/20210821094246.10149-3-linmiaohe@huawei.com
Fixes: d479960e44f2 ("mm: disable LRU pagevec during the migration temporarily")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Chris Goldsworthy <cgoldswo@codeaurora.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
GENPD core doesn't support handling performance state changes while
consumer device is runtime-suspended or when runtime PM is disabled.
GENPD core may override performance state that was configured by device
driver while RPM of the device was disabled or device was RPM-suspended.
Let's close that gap by allowing drivers to control performance state
while RPM of a consumer device is disabled and to set up performance
state of RPM-suspended device that will be applied by GENPD core on
RPM-resume of the device.
Fixes: 5937c3ce2122 ("PM: domains: Drop/restore performance state votes for devices at runtime PM")
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
It turns out that the SIGIO/FASYNC situation is almost exactly the same
as the EPOLLET case was: user space really wants to be notified after
every operation.
Now, in a perfect world it should be sufficient to only notify user
space on "state transitions" when the IO state changes (ie when a pipe
goes from unreadable to readable, or from unwritable to writable). User
space should then do as much as possible - fully emptying the buffer or
what not - and we'll notify it again the next time the state changes.
But as with EPOLLET, we have at least one case (stress-ng) where the
kernel sent SIGIO due to the pipe being marked for asynchronous
notification, but the user space signal handler then didn't actually
necessarily read it all before returning (it read more than what was
written, but since there could be multiple writes, it could leave data
pending).
The user space code then expected to get another SIGIO for subsequent
writes - even though the pipe had been readable the whole time - and
would only then read more.
This is arguably a user space bug - and Colin King already fixed the
stress-ng code in question - but the kernel regression rules are clear:
it doesn't matter if kernel people think that user space did something
silly and wrong. What matters is that it used to work.
So if user space depends on specific historical kernel behavior, it's a
regression when that behavior changes. It's on us: we were silly to
have that non-optimal historical behavior, and our old kernel behavior
was what user space was tested against.
Because of how the FASYNC notification was tied to wakeup behavior, this
was first broken by commits f467a6a66419 and 1b6b26ae7053 ("pipe: fix
and clarify pipe read/write wakeup logic"), but at the time it seems
nobody noticed. Probably because the stress-ng problem case ends up
being timing-dependent too.
It was then unwittingly fixed by commit 3a34b13a88ca ("pipe: make pipe
writes always wake up readers") only to be broken again when by commit
3b844826b6c6 ("pipe: avoid unnecessary EPOLLET wakeups under normal
loads").
And at that point the kernel test robot noticed the performance
refression in the stress-ng.sigio.ops_per_sec case. So the "Fixes" tag
below is somewhat ad hoc, but it matches when the issue was noticed.
Fix it for good (knock wood) by simply making the kill_fasync() case
separate from the wakeup case. FASYNC is quite rare, and we clearly
shouldn't even try to use the "avoid unnecessary wakeups" logic for it.
Link: https://lore.kernel.org/lkml/20210824151337.GC27667@xsang-OptiPlex-9020/
Fixes: 3b844826b6c6 ("pipe: avoid unnecessary EPOLLET wakeups under normal loads")
Reported-by: kernel test robot <oliver.sang@intel.com>
Tested-by: Oliver Sang <oliver.sang@intel.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull ucount fixes from Eric Biederman:
"This branch fixes a regression that made it impossible to increase
rlimits that had been converted to the ucount infrastructure, and also
fixes a reference counting bug where the reference was not incremented
soon enough.
The fixes are trivial and the bugs have been encountered in the wild,
and the fixes have been tested"
* 'for-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
ucounts: Increase ucounts reference counter before the security hook
ucounts: Fix regression preventing increasing of rlimits in init_user_ns
|
|
|
|
|
|
kcalloc() is called to allocate memory for m->m_info, and if it fails,
ceph_mdsmap_destroy() behind the label out_err will be called:
ceph_mdsmap_destroy(m);
In ceph_mdsmap_destroy(), m->m_info is dereferenced through:
kfree(m->m_info[i].export_targets);
To fix this possible null-pointer dereference, check m->m_info before the
for loop to free m->m_info[i].export_targets.
[ jlayton: fix up whitespace damage
only kfree(m->m_info) if it's non-NULL ]
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Tuo Li <islituo@gmail.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
The ceph_cap_flush structures are usually dynamically allocated, but
the ceph_cap_snap has an embedded one.
When force umounting, the client will try to remove all the session
caps. During this, it will free them, but that should not be done
with the ones embedded in a capsnap.
Fix this by adding a new boolean that indicates that the cap flush is
embedded in a capsnap, and skip freeing it if that's set.
At the same time, switch to using list_del_init() when detaching the
i_list and g_list heads. It's possible for a forced umount to remove
these objects but then handle_cap_flushsnap_ack() races in and does the
list_del_init() again, corrupting memory.
Cc: stable@vger.kernel.org
URL: https://tracker.ceph.com/issues/52283
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
The rt_mutex based ww_mutex variant queues the new waiter first in the
lock's rbtree before evaluating the ww_mutex specific conditions which
might decide that the waiter should back out. This check and conditional
exit happens before the waiter is enqueued into the PI chain.
The failure handling at the call site assumes that the waiter, if it is the
top most waiter on the lock, is queued in the PI chain and then proceeds to
adjust the unmodified PI chain, which results in RB tree corruption.
Dequeue the waiter from the lock waiter list in the ww_mutex error exit
path to prevent this.
Fixes: add461325ec5 ("locking/rtmutex: Extend the rtmutex core to support ww_mutex")
Reported-by: Sebastian Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210825102454.042280541@linutronix.de
|
|
The new rt_mutex_spin_on_onwer() loop checks whether the spinning waiter is
still the top waiter on the lock by utilizing rt_mutex_top_waiter(), which
is broken because that function contains a sanity check which dereferences
the top waiter pointer to check whether the waiter belongs to the
lock. That's wrong in the lockless spinwait case:
CPU 0 CPU 1
rt_mutex_lock(lock) rt_mutex_lock(lock);
queue(waiter0)
waiter0 == rt_mutex_top_waiter(lock)
rt_mutex_spin_on_onwer(lock, waiter0) { queue(waiter1)
waiter1 == rt_mutex_top_waiter(lock)
...
top_waiter = rt_mutex_top_waiter(lock)
leftmost = rb_first_cached(&lock->waiters);
-> signal
dequeue(waiter1)
destroy(waiter1)
w = rb_entry(leftmost, ....)
BUG_ON(w->lock != lock) <- UAF
The BUG_ON() is correct for the case where the caller holds lock->wait_lock
which guarantees that the leftmost waiter entry cannot vanish. For the
lockless spinwait case it's broken.
Create a new helper function which avoids the pointer dereference and just
compares the leftmost entry pointer with current's waiter pointer to
validate that currrent is still elegible for spinning.
Fixes: 992caf7f1724 ("locking/rtmutex: Add adaptive spinwait mechanism")
Reported-by: Sebastian Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210825102453.981720644@linutronix.de
|
|
Per SDM, bit 2:0 of CPUID(0x14,1).EAX[2:0] reports the number of
configurable address ranges for filtering, not bit 1:0.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Link: https://lkml.kernel.org/r/20210824040622.4081502-1-xiaoyao.li@intel.com
|
|
vctrl_enable() and vctrl_disable() call regulator_enable() and
regulator_disable(), respectively. However, vctrl_* are regulator ops
and should not be calling the locked regulator APIs. Doing so results in
a lockdep warning.
Instead of exporting more internal regulator ops, model the ctrl supply
as an actual supply to vctrl-regulator. At probe time this driver still
needs to use the consumer API to fetch its constraints, but otherwise
lets the regulator core handle the upstream supply for it.
The enable/disable/is_enabled ops are not removed, but now only track
state internally. This preserves the original behavior with the ops
being available, but one could argue that the original behavior was
already incorrect: the internal state would not match the upstream
supply if that supply had another consumer that enabled the supply,
while vctrl-regulator was not enabled.
The lockdep warning is as follows:
WARNING: possible circular locking dependency detected
5.14.0-rc6 #2 Not tainted
------------------------------------------------------
swapper/0/1 is trying to acquire lock:
ffffffc011306d00 (regulator_list_mutex){+.+.}-{3:3}, at:
regulator_lock_dependent (arch/arm64/include/asm/current.h:19
include/linux/ww_mutex.h:111
drivers/regulator/core.c:329)
but task is already holding lock:
ffffff8004a77160 (regulator_ww_class_mutex){+.+.}-{3:3}, at:
regulator_lock_recursive (drivers/regulator/core.c:156
drivers/regulator/core.c:263)
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (regulator_ww_class_mutex){+.+.}-{3:3}:
__mutex_lock_common (include/asm-generic/atomic-instrumented.h:606
include/asm-generic/atomic-long.h:29
kernel/locking/mutex.c:103
kernel/locking/mutex.c:144
kernel/locking/mutex.c:963)
ww_mutex_lock (kernel/locking/mutex.c:1199)
regulator_lock_recursive (drivers/regulator/core.c:156
drivers/regulator/core.c:263)
regulator_lock_dependent (drivers/regulator/core.c:343)
regulator_enable (drivers/regulator/core.c:2808)
set_machine_constraints (drivers/regulator/core.c:1536)
regulator_register (drivers/regulator/core.c:5486)
devm_regulator_register (drivers/regulator/devres.c:196)
reg_fixed_voltage_probe (drivers/regulator/fixed.c:289)
platform_probe (drivers/base/platform.c:1427)
[...]
-> #1 (regulator_ww_class_acquire){+.+.}-{0:0}:
regulator_lock_dependent (include/linux/ww_mutex.h:129
drivers/regulator/core.c:329)
regulator_enable (drivers/regulator/core.c:2808)
set_machine_constraints (drivers/regulator/core.c:1536)
regulator_register (drivers/regulator/core.c:5486)
devm_regulator_register (drivers/regulator/devres.c:196)
reg_fixed_voltage_probe (drivers/regulator/fixed.c:289)
[...]
-> #0 (regulator_list_mutex){+.+.}-{3:3}:
__lock_acquire (kernel/locking/lockdep.c:3052 (discriminator 4)
kernel/locking/lockdep.c:3174 (discriminator 4)
kernel/locking/lockdep.c:3789 (discriminator 4)
kernel/locking/lockdep.c:5015 (discriminator 4))
lock_acquire (arch/arm64/include/asm/percpu.h:39
kernel/locking/lockdep.c:438
kernel/locking/lockdep.c:5627)
__mutex_lock_common (include/asm-generic/atomic-instrumented.h:606
include/asm-generic/atomic-long.h:29
kernel/locking/mutex.c:103
kernel/locking/mutex.c:144
kernel/locking/mutex.c:963)
mutex_lock_nested (kernel/locking/mutex.c:1125)
regulator_lock_dependent (arch/arm64/include/asm/current.h:19
include/linux/ww_mutex.h:111
drivers/regulator/core.c:329)
regulator_enable (drivers/regulator/core.c:2808)
vctrl_enable (drivers/regulator/vctrl-regulator.c:400)
_regulator_do_enable (drivers/regulator/core.c:2617)
_regulator_enable (drivers/regulator/core.c:2764)
regulator_enable (drivers/regulator/core.c:308
drivers/regulator/core.c:2809)
_set_opp (drivers/opp/core.c:819 drivers/opp/core.c:1072)
dev_pm_opp_set_rate (drivers/opp/core.c:1164)
set_target (drivers/cpufreq/cpufreq-dt.c:62)
__cpufreq_driver_target (drivers/cpufreq/cpufreq.c:2216
drivers/cpufreq/cpufreq.c:2271)
cpufreq_online (drivers/cpufreq/cpufreq.c:1488 (discriminator 2))
cpufreq_add_dev (drivers/cpufreq/cpufreq.c:1563)
subsys_interface_register (drivers/base/bus.c:?)
cpufreq_register_driver (drivers/cpufreq/cpufreq.c:2819)
dt_cpufreq_probe (drivers/cpufreq/cpufreq-dt.c:344)
[...]
other info that might help us debug this:
Chain exists of:
regulator_list_mutex --> regulator_ww_class_acquire --> regulator_ww_class_mutex
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(regulator_ww_class_mutex);
lock(regulator_ww_class_acquire);
lock(regulator_ww_class_mutex);
lock(regulator_list_mutex);
*** DEADLOCK ***
6 locks held by swapper/0/1:
#0: ffffff8002d32188 (&dev->mutex){....}-{3:3}, at:
__device_driver_lock (drivers/base/dd.c:1030)
#1: ffffffc0111a0520 (cpu_hotplug_lock){++++}-{0:0}, at:
cpufreq_register_driver (drivers/cpufreq/cpufreq.c:2792 (discriminator 2))
#2: ffffff8002a8d918 (subsys mutex#9){+.+.}-{3:3}, at:
subsys_interface_register (drivers/base/bus.c:1033)
#3: ffffff800341bb90 (&policy->rwsem){+.+.}-{3:3}, at:
cpufreq_online (include/linux/bitmap.h:285
include/linux/cpumask.h:405
drivers/cpufreq/cpufreq.c:1399)
#4: ffffffc011f0b7b8 (regulator_ww_class_acquire){+.+.}-{0:0}, at:
regulator_enable (drivers/regulator/core.c:2808)
#5: ffffff8004a77160 (regulator_ww_class_mutex){+.+.}-{3:3}, at:
regulator_lock_recursive (drivers/regulator/core.c:156
drivers/regulator/core.c:263)
stack backtrace:
CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.14.0-rc6 #2 7c8f8996d021ed0f65271e6aeebf7999de74a9fa
Hardware name: Google Scarlet (DT)
Call trace:
dump_backtrace (arch/arm64/kernel/stacktrace.c:161)
show_stack (arch/arm64/kernel/stacktrace.c:218)
dump_stack_lvl (lib/dump_stack.c:106 (discriminator 2))
dump_stack (lib/dump_stack.c:113)
print_circular_bug (kernel/locking/lockdep.c:?)
check_noncircular (kernel/locking/lockdep.c:?)
__lock_acquire (kernel/locking/lockdep.c:3052 (discriminator 4)
kernel/locking/lockdep.c:3174 (discriminator 4)
kernel/locking/lockdep.c:3789 (discriminator 4)
kernel/locking/lockdep.c:5015 (discriminator 4))
lock_acquire (arch/arm64/include/asm/percpu.h:39
kernel/locking/lockdep.c:438
kernel/locking/lockdep.c:5627)
__mutex_lock_common (include/asm-generic/atomic-instrumented.h:606
include/asm-generic/atomic-long.h:29
kernel/locking/mutex.c:103
kernel/locking/mutex.c:144
kernel/locking/mutex.c:963)
mutex_lock_nested (kernel/locking/mutex.c:1125)
regulator_lock_dependent (arch/arm64/include/asm/current.h:19
include/linux/ww_mutex.h:111
drivers/regulator/core.c:329)
regulator_enable (drivers/regulator/core.c:2808)
vctrl_enable (drivers/regulator/vctrl-regulator.c:400)
_regulator_do_enable (drivers/regulator/core.c:2617)
_regulator_enable (drivers/regulator/core.c:2764)
regulator_enable (drivers/regulator/core.c:308
drivers/regulator/core.c:2809)
_set_opp (drivers/opp/core.c:819 drivers/opp/core.c:1072)
dev_pm_opp_set_rate (drivers/opp/core.c:1164)
set_target (drivers/cpufreq/cpufreq-dt.c:62)
__cpufreq_driver_target (drivers/cpufreq/cpufreq.c:2216
drivers/cpufreq/cpufreq.c:2271)
cpufreq_online (drivers/cpufreq/cpufreq.c:1488 (discriminator 2))
cpufreq_add_dev (drivers/cpufreq/cpufreq.c:1563)
subsys_interface_register (drivers/base/bus.c:?)
cpufreq_register_driver (drivers/cpufreq/cpufreq.c:2819)
dt_cpufreq_probe (drivers/cpufreq/cpufreq-dt.c:344)
[...]
Reported-by: Brian Norris <briannorris@chromium.org>
Fixes: f8702f9e4aa7 ("regulator: core: Use ww_mutex for regulators locking")
Fixes: e9153311491d ("regulator: vctrl-regulator: Avoid deadlock getting and setting the voltage")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20210825033704.3307263-3-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In commit e9153311491d ("regulator: vctrl-regulator: Avoid deadlock getting
and setting the voltage"), all calls to get/set the voltage of the
control regulator were switched to unlocked versions to avoid deadlocks.
However, the call in the probe path is done without regulator locks
held. In this case the locked version should be used.
Switch back to the locked regulator_get_voltage() in the probe path to
avoid any mishaps.
Fixes: e9153311491d ("regulator: vctrl-regulator: Avoid deadlock getting and setting the voltage")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20210825033704.3307263-2-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This reverts commit f2165627319ffd33a6217275e5690b1ab5c45763.
[BUG]
It's no longer possible to create compressed inline extent after commit
f2165627319f ("btrfs: compression: don't try to compress if we don't
have enough pages").
[CAUSE]
For compression code, there are several possible reasons we have a range
that needs to be compressed while it's no more than one page.
- Compressed inline write
The data is always smaller than one sector and the test lacks the
condition to properly recognize a non-inline extent.
- Compressed subpage write
For the incoming subpage compressed write support, we require page
alignment of the delalloc range.
And for 64K page size, we can compress just one page into smaller
sectors.
For those reasons, the requirement for the data to be more than one page
is not correct, and is already causing regression for compressed inline
data writeback. The idea of skipping one page to avoid wasting CPU time
could be revisited in the future.
[FIX]
Fix it by reverting the offending commit.
Reported-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org>
Link: https://lore.kernel.org/linux-btrfs/afa2742.c084f5d6.17b6b08dffc@tnonline.net
Fixes: f2165627319f ("btrfs: compression: don't try to compress if we don't have enough pages")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This partially reverts commit 16c9afc776608324ca71c0bc354987bab532f51d.
Alex Bee reports a regression in 5.14 on their RK3328 SoC when
configuring the PL330 DMA controller:
| ------------[ cut here ]------------
| WARNING: CPU: 2 PID: 373 at kernel/dma/mapping.c:235 dma_map_resource+0x68/0xc0
| Modules linked in: spi_rockchip(+) fuse
| CPU: 2 PID: 373 Comm: systemd-udevd Not tainted 5.14.0-rc7 #1
| Hardware name: Pine64 Rock64 (DT)
| pstate: 80000005 (Nzcv daif -PAN -UAO -TCO BTYPE=--)
| pc : dma_map_resource+0x68/0xc0
| lr : pl330_prep_slave_fifo+0x78/0xd0
This appears to be because dma_map_resource() is being called for a
physical address which does not correspond to a memory address yet does
have a valid 'struct page' due to the way in which the vmemmap is
constructed.
Prior to 16c9afc77660 ("arm64/mm: drop HAVE_ARCH_PFN_VALID"), the arm64
implementation of pfn_valid() called memblock_is_memory() to return
'false' for such regions and the DMA mapping request would proceed.
However, now that we are using the generic implementation where only the
presence of the memory map entry is considered, we return 'true' and
erroneously fail with DMA_MAPPING_ERROR because we identify the region
as DRAM.
Although fixing this in the DMA mapping code is arguably the right fix,
it is a risky, cross-architecture change at this stage in the cycle. So
just revert arm64 back to its old pfn_valid() implementation for v5.14.
The change to the generic pfn_valid() code is preserved from the original
patch, so as to avoid impacting other architectures.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Reported-by: Alex Bee <knaerzche@gmail.com>
Link: https://lore.kernel.org/r/d3a3c828-b777-faf8-e901-904995688437@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
While running kselftests, Hangbin observed that sch_ets.sh often crashes,
and splats like the following one are seen in the output of 'dmesg':
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 159f12067 P4D 159f12067 PUD 159f13067 PMD 0
Oops: 0000 [#1] SMP NOPTI
CPU: 2 PID: 921 Comm: tc Not tainted 5.14.0-rc6+ #458
Hardware name: Red Hat KVM, BIOS 1.11.1-4.module+el8.1.0+4066+0f1aadab 04/01/2014
RIP: 0010:__list_del_entry_valid+0x2d/0x50
Code: 48 8b 57 08 48 b9 00 01 00 00 00 00 ad de 48 39 c8 0f 84 ac 6e 5b 00 48 b9 22 01 00 00 00 00 ad de 48 39 ca 0f 84 cf 6e 5b 00 <48> 8b 32 48 39 fe 0f 85 af 6e 5b 00 48 8b 50 08 48 39 f2 0f 85 94
RSP: 0018:ffffb2da005c3890 EFLAGS: 00010217
RAX: 0000000000000000 RBX: ffff9073ba23f800 RCX: dead000000000122
RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff9073ba23fbc8
RBP: ffff9073ba23f890 R08: 0000000000000001 R09: 0000000000000001
R10: 0000000000000001 R11: 0000000000000001 R12: dead000000000100
R13: ffff9073ba23fb00 R14: 0000000000000002 R15: 0000000000000002
FS: 00007f93e5564e40(0000) GS:ffff9073bba00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000014ad34000 CR4: 0000000000350ee0
Call Trace:
ets_qdisc_reset+0x6e/0x100 [sch_ets]
qdisc_reset+0x49/0x1d0
tbf_reset+0x15/0x60 [sch_tbf]
qdisc_reset+0x49/0x1d0
dev_reset_queue.constprop.42+0x2f/0x90
dev_deactivate_many+0x1d3/0x3d0
dev_deactivate+0x56/0x90
qdisc_graft+0x47e/0x5a0
tc_get_qdisc+0x1db/0x3e0
rtnetlink_rcv_msg+0x164/0x4c0
netlink_rcv_skb+0x50/0x100
netlink_unicast+0x1a5/0x280
netlink_sendmsg+0x242/0x480
sock_sendmsg+0x5b/0x60
____sys_sendmsg+0x1f2/0x260
___sys_sendmsg+0x7c/0xc0
__sys_sendmsg+0x57/0xa0
do_syscall_64+0x3a/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f93e44b8338
Code: 89 02 48 c7 c0 ff ff ff ff eb b5 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8d 05 25 43 2c 00 8b 00 85 c0 75 17 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 41 54 41 89 d4 55
RSP: 002b:00007ffc0db737a8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 0000000061255c06 RCX: 00007f93e44b8338
RDX: 0000000000000000 RSI: 00007ffc0db73810 RDI: 0000000000000003
RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000
R10: 000000000000000b R11: 0000000000000246 R12: 0000000000000001
R13: 0000000000687880 R14: 0000000000000000 R15: 0000000000000000
Modules linked in: sch_ets sch_tbf dummy rfkill iTCO_wdt iTCO_vendor_support intel_rapl_msr intel_rapl_common joydev i2c_i801 pcspkr i2c_smbus lpc_ich virtio_balloon ip_tables xfs libcrc32c crct10dif_pclmul crc32_pclmul crc32c_intel ahci libahci ghash_clmulni_intel libata serio_raw virtio_blk virtio_console virtio_net net_failover failover sunrpc dm_mirror dm_region_hash dm_log dm_mod
CR2: 0000000000000000
When the change() function decreases the value of 'nstrict', we must take
into account that packets might be already enqueued on a class that flips
from 'strict' to 'quantum': otherwise that class will not be added to the
bandwidth-sharing list. Then, a call to ets_qdisc_reset() will attempt to
do list_del(&alist) with 'alist' filled with zero, hence the NULL pointer
dereference.
For classes flipping from 'strict' to 'quantum', initialize an empty list
and eventually add it to the bandwidth-sharing list, if there are packets
already enqueued. In this way, the kernel will:
a) prevent crashing as described above.
b) avoid retaining the backlog packets (for an arbitrarily long time) in
case no packet is enqueued after a change from 'strict' to 'quantum'.
Reported-by: Hangbin Liu <liuhangbin@gmail.com>
Fixes: dcc68b4d8084 ("net: sch_ets: Add a new Qdisc")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Thanks to Kees Cook who detected the problem of memset that starting
from not the first member, but sized for the whole struct.
The better change will be to remove the redundant memset and to clear
only the msix_cnt member.
Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Shai Malin <smalin@marvell.com>
Reported-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Ensure a valid XSK buffer before proceed to free the xdp buffer.
The following kernel panic is observed without this patch:
RIP: 0010:xp_free+0x5/0x40
Call Trace:
stmmac_napi_poll_rxtx+0x332/0xb30 [stmmac]
? stmmac_tx_timer+0x3c/0xb0 [stmmac]
net_rx_action+0x13d/0x3d0
__do_softirq+0xfc/0x2fb
? smpboot_register_percpu_thread+0xe0/0xe0
run_ksoftirqd+0x32/0x70
smpboot_thread_fn+0x1d8/0x2c0
kthread+0x169/0x1a0
? kthread_park+0x90/0x90
ret_from_fork+0x1f/0x30
---[ end trace 0000000000000002 ]---
Fixes: bba2556efad6 ("net: stmmac: Enable RX via AF_XDP zero-copy")
Cc: <stable@vger.kernel.org> # 5.13.x
Suggested-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
After free xsk_pool, there is possibility that napi polling is still
running in the middle, thus causes a kernel crash due to kernel NULL
pointer dereference of rx_q->xsk_pool and tx_q->xsk_pool.
Fix this by changing the XDP pool setup sequence to:
1. disable napi before free xsk_pool
2. enable napi after init xsk_pool
The following kernel panic is observed without this patch:
RIP: 0010:xsk_uses_need_wakeup+0x5/0x10
Call Trace:
stmmac_napi_poll_rxtx+0x3a9/0xae0 [stmmac]
__napi_poll+0x27/0x130
net_rx_action+0x233/0x280
__do_softirq+0xe2/0x2b6
run_ksoftirqd+0x1a/0x20
smpboot_thread_fn+0xac/0x140
? sort_range+0x20/0x20
kthread+0x124/0x150
? set_kthread_struct+0x40/0x40
ret_from_fork+0x1f/0x30
---[ end trace a77c8956b79ac107 ]---
Fixes: bba2556efad6 ("net: stmmac: Enable RX via AF_XDP zero-copy")
Cc: <stable@vger.kernel.org> # 5.13.x
Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, the install target in arch/x86/Makefile descends into
arch/x86/boot/Makefile to invoke the shell script, but there is no
good reason to do so.
arch/x86/Makefile can run the shell script directly.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210729140023.442101-2-masahiroy@kernel.org
|
|
Commit
f279b49f13bd ("x86/boot: Modernize genimage script; hdimage+EFI support")
removed the bzlilo target from arch/x86/boot/Makefile.
Remove the left-over from arch/x86/Makefile.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210729140023.442101-1-masahiroy@kernel.org
|
|
macb_ptp_desc will not return NULL under most circumstances with correct
Kconfig and IP design config register. But for the sake of the extreme
corner case, check for NULL when using the helper. In case of rx_tstamp,
no action is necessary except to return (similar to timestamp disabled)
and warn. In case of TX, return -EINVAL to let the skb be free. Perform
this check before marking skb in progress.
Fixes coverity warning:
(4) Event dereference:
Dereferencing a null pointer "desc_ptp"
Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This reverts commit 2c896fb02e7f65299646f295a007bda043e0f382
"net: stmmac: dwmac-rk: add pd_gmac support for rk3399" and fixes
unbalanced pm_runtime_enable warnings.
In the commit to be reverted, support for power management was
introduced to the Rockchip glue code. Later, power management support
was introduced to the stmmac core code, resulting in multiple
invocations of pm_runtime_{enable,disable,get_sync,put_sync}.
The multiple invocations happen in rk_gmac_powerup and
stmmac_{dvr_probe, resume} as well as in rk_gmac_powerdown and
stmmac_{dvr_remove, suspend}, respectively, which are always called
in conjunction.
Fixes: 5ec55823438e850c91c6b92aec93fb04ebde29e2 ("net: stmmac: add clocks management for gmac driver")
Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Generate kvm hypercall functions with a macro instead of duplicating
the more or less identical code seven times. This also reduces number
of lines of code.
However the main purpose is to get rid of as many as possible open
coded error prone register asm constructs in s390 architecture code.
For the only user of kvm_hypercall identical code is created
before/after this patch (drivers/s390/virtio/virtio_ccw.c).
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Link: https://lore.kernel.org/r/20210713145713.2815167-1-hca@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Add tracing of interactions between the SCLP base driver, firmware and
other drivers to support problem determination in case of SCLP-related
issues.
For that purpose this patch introduces two new s390dbf debug areas:
- sclp: An abbreviated log of all common interactions
- sclp_err: A full log of failed or abnormal interactions
Tracing of full SCCB contents can be enabled for the sclp area by
setting its debug level to maximum (6).
Overview of added trace events:
* Firmware interaction:
- SRV1: Service call about to be issued
- SRV2: Service call was issued
- INT: Interrupt received
* Driver interaction:
- RQAD: Request was added
- RQOK: Request success
- RQAB: Request aborted
- RQTM: Request timed out
- REG: Event listener registered
- UREG: Event listener unregistered
- EVNT: Event callback
- STCG: State-change callback
* Abnormal events:
- TMO: A timeout occurred
- UNEX: Unexpected SCCB completion
* Other (not traced at default level):
- SYN1: Synchronous wait start
- SYN2: Synchronous wait end
Since the SCLP interface is used by console drivers this patch also
moves s390dbf printks outside the critical section protected by debug
area locks to prevent a potential deadlock that would otherwise be
introduced between console_owner --> sclp_lock --> sclp_debug.lock.
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Debug areas can currently only be used after s390dbf initialization
which occurs as a postcore_initcall. This is too late for tracing
earlier code such as that related to console_init().
This patch introduces a macro for defining a statically initialized
debug area that can be used to trace very early code. The macro is made
available for built-in code only because modules are never running
during early boot.
Example usage:
1. Define static debug area:
DEFINE_STATIC_DEBUG_INFO(my_debug, "my_debug", 4, 1, 16,
&debug_hex_ascii_view);
2. Add trace entry:
debug_event(&my_debug, 0, "DATA", 4);
Note: The debug area is automatically registered in debugfs during boot.
A driver must not call any of the debug_register()/_unregister()
functions on a static debug_info_t!
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Currently allocation and registration of s390dbf debug areas are tied
together. As a result, a debug area cannot be unregistered and
re-registered while any process has an associated debugfs file open.
Fix this by splitting alloc/release from register/unregister.
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Any previously recorded s390dbf debug data is reset when a debug area
is resized using the 'pages' sysfs attribute. This can make
live-debugging unnecessarily complex.
Fix this by copying existing debug data to the newly allocated debug
area when resizing.
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Avoid that the "restart_part2" label, which is in the middle of a
function, appears in /proc/kallsyms.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
In case of splitting to 4k mapping the early exit in walk_pte_level()
must only be taken iff flags is equal to SET_MEMORY_4K.
Currently the early exit is taken if the flag is set, and also others
might be set. This may lead to the situation that a mapping is split
but other changes are not done, like e.g. setting pages to R/W.
There is currently no such caller, but there might be in the future.
Fixes: b3e1a00c8fa4 ("s390/mm: implement set_memory_4k()")
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Rename amod31 to amode31 like it was supposed to be.
Fixes: c78d0c7484f0 ("s390: rename dma section to amode31")
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Both are no longer used since the conversion to generic
entry, therefore remove them.
Fixes: 56e62a737028 ("s390: convert to generic entry")
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The 0day bot reported some kernel-doc warnings in this file so clean up
all of the kernel-doc and use proper kernel-doc formatting.
There are no more kernel-doc errors or warnings reported in this file.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Tony Krowiak <akrowiak@linux.ibm.com>
Cc: Halil Pasic <pasic@linux.ibm.com>
Cc: Jason Herne <jjherne@linux.ibm.com>
Cc: Harald Freudenberger <freude@linux.ibm.com>
Cc: linux-s390@vger.kernel.org
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Link: https://lore.kernel.org/r/20210806050149.9614-1-rdunlap@infradead.org
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Currently zpci_dma_init_device()/zpci_dma_exit_device() is called as
part of zpci_enable_device()/zpci_disable_device() and errors for
zpci_dma_exit_device() are always ignored even if we could abort.
Improve upon this by moving zpci_dma_exit_device() out of
zpci_disable_device() and check for errors whenever we have a way to
abort the current operation. Note that for example in
zpci_event_hard_deconfigured() the device is expected to be gone so we
really can't abort and proceed even in case of error.
Similarly move the cc == 3 special case out of zpci_unregister_ioat()
and into the callers allowing to abort when finding an already disabled
devices precludes proceeding with the operation.
While we are at it log IOAT register/unregister errors in the s390
debugfs log,
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Currently clp_get_state() and clp_refresh_fh() awkwardly use the
clp_list_pci() callback mechanism to find the entry for a specific FID
and update its zdev, respectively return its state.
This is both needlessly complex and means we are always going through
the entire PCI function list even if the FID has already been found.
Instead lets introduce a clp_find_pci() function to find a specific
entry and share the CLP List PCI request handling code with
clp_list_pci().
With that in place we can also easily make the function handle a simple
out parameter instead of directly altering the zdev allowing easier
access to the updated function handle by the caller.
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Instead of always treating CLP_RC_SETPCIFN_ALRDY as success and blindly
updating the function handle restrict this special handling to the
disable case by moving it into zpci_disable_device() and still treating
it as an error while also updating the function handle such that
a subsequent zpci_disable_device() succeeds or the caller can ignore the
error when aborting is not an option such as for zPCI event 0x304.
Also print this occurrence to the log such that an admin can tell why
a disable operation returned an error.
A mismatch between the state of the underlying device and our view of it
can naturally happen when the device suddenly enters the error state but
we haven't gotten the error notification yet, it must not happen on
enable though.
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Currently clp_set_pci_fn() always returns 0 as long as the CLP request
itself succeeds even if the operation itself returns a response code
other than CLP_RC_OK or CLP_RC_SETPCIFN_ALRDY. This is highly misleading
because calling code assumes that a zero rc means that the operation was
successful.
Fix this by returning the response code or cc on failure with the
exception of the special handling for CLP_RC_SETPCIFN_ALRDY. Also let's
not assume that the returned function handle for CLP_RC_SETPCIFN_ALRDY
is 0, we don't need it anyway.
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Move offsetting all of vmlinux_info fields to a separate
function for better readability.
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
It is currently possible to initialize a large PMD page when
the address is not aligned on page boundary.
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
As .remove() is only called after a successful .probe() call, we can
trust that the drvdata is valid.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The device struct provides a pointer for driver-private data. Use this
in the zcrypt drivers (as vfio_ap already does), and then remove the
custom pointer from the AP device structs.
As really_probe() will always clear the drvdata pointer on error, we
no longer have to do so ourselves.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The device struct itself already contains a pointer to its driver.
Use this consistently, instead of duplicating it.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
On failure to register a struct zpci_dev with a struct zpci_bus we left
a dangling pointer in zdev->zbus. As zpci_create_device() bails if
zpci_bus_device_register() fails this is of no consequence but still bad
practice.
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
It's currently safe to call zpci_cleanup_bus_resources() even if the
resources were never created but it makes no sense so check
zdev->has_resources before we call zpci_cleanup_bus_resources() in
zpci_release_device().
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Acked-by: Pierre Morel <pmorel@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
