summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-01-10drm/amd/display: 3.2.316Ryan Seto
This version brings along following fixes: - Add some feature for secure display - Add replay desync error count tracking and reset - Update chip_cap defines and usage - Remove unnecessary eDP power down - Fix some stuttering/corruption issue on PSR panel - Cleanup and refactoring DML2.1 Acked-by: Wayne Lin <wayne.lin@amd.com> Reviewed-by: Martin Leung <martin.leung@amd.com> Signed-off-by: Ryan Seto <ryanseto@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: avoid reset DTBCLK at clock initCharlene Liu
[why & how] this is to init to HW real DTBCLK. and use real HW DTBCLK status to update internal logic state Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Martin Leung <martin.leung@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Signed-off-by: Ausef Yousof <Ausef.Yousof@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: improve dpia pre-trainPeichen Huang
[WHY] We see unstable DP LL 4.2.1.3 test result with dpia pre-train. It is because the outbox interrupt mechanism can not handle HPD immediately and require some improvement. [HOW] 1. not enable link if hpd_pending is true. 2. abort pre-train if training failed and hpd_pending is true. 3. check if 2 lane supported when it is alt mode Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Signed-off-by: Peichen Huang <PeiChen.Huang@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: Apply DML21 PatchesAustin Zheng
[Why & How] Add several DML21 fixes Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Austin Zheng <Austin.Zheng@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: Use HW lock mgr for PSR1Tom Chung
[Why] Without the dmub hw lock, it may cause the lock timeout issue while do modeset on PSR1 eDP panel. [How] Allow dmub hw lock for PSR1. Reviewed-by: Sun peng Li <sunpeng.li@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: Revised for Replay Pseudo vblank controlDennis Chan
[why & how] Revised Replay Full screen video Pseudo vblank control. Reviewed-by: Allen Li <allen.li@amd.com> Signed-off-by: Dennis Chan <dennis.chan@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: Add a new flag for replay low hzRobin Chen
[Why & How] Add a new flag in replay_config to indicate the replay low hz status. Reviewed-by: Allen Li <allen.li@amd.com> Signed-off-by: Robin Chen <robin.chen@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: Remove unused read_ono_state function from Hwss moduleKarthi Kandasamy
[Why] The functions read_ono_state are no longer in use and have been identified as redundant. Removing them helps streamline the codebase and improve maintainability by eliminating unnecessary code. [How] These unused functions were removed from Hwss module, ensuring that no functionality is affected, and the code is simplified. Reviewed-by: Martin Leung <martin.leung@amd.com> Signed-off-by: Karthi Kandasamy <karthi.kandasamy@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: Do not elevate mem_type change to full updateLeo Li
[Why] There should not be any need to revalidate bandwidth on memory placement change, since the fb is expected to be pinned to DCN-accessable memory before scanout. For APU it's DRAM, and DGPU, it's VRAM. However, async flips + memory type change needs to be rejected. [How] Do not set lock_and_validation_needed on mem_type change. Instead, reject an async_flip request if the crtc's buffer(s) changed mem_type. This may fix stuttering/corruption experienced with PSR SU and PSR1 panels, if the compositor allocates fbs in both VRAM carveout and GTT and flips between them. Fixes: a7c0cad0dc06 ("drm/amd/display: ensure async flips are only accepted for fast updates") Reviewed-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: Do not wait for PSR disable on vbl enableLeo Li
[Why] Outside of a modeset/link configuration change, we should not have to wait for the panel to exit PSR. Depending on the panel and it's state, it may take multiple frames for it to exit PSR. Therefore, waiting in all scenarios may cause perceived stuttering, especially in combination with faster vblank shutdown. [How] PSR1 disable is hooked up to the vblank enable event, and vice versa. In case of vblank enable, do not wait for panel to exit PSR, but still wait in all other cases. We also avoid a call to unnecessarily change power_opts on disable - this ends up sending another command to dmcub fw. When testing against IGT, some crc tests like kms_plane_alpha_blend and amd_hotplug were failing due to CRC timeouts. This was found to be caused by the early return before HW has fully exited PSR1. Fix this by first making sure we grab a vblank reference, then waiting for panel to exit PSR1, before programming hw for CRC generation. Fixes: 58a261bfc967 ("drm/amd/display: use a more lax vblank enable policy for older ASICs") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3743 Reviewed-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: Remove unnecessary eDP power downYiling Chen
[why] When first time of link training is fail, eDP would be powered down and would not be powered up for next retry link training. It causes that all of retry link linking would be fail. [how] We has extracted both power up and down sequence from enable/disable link output function before DCN32. We remov eDP power down in dcn32_disable_link_output(). Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Yiling Chen <yi-ling.chen2@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10Revert "drm/amd/display: Enable urgent latency adjustments for DCN35"Nicholas Susanto
Revert commit 284f141f5ce5 ("drm/amd/display: Enable urgent latency adjustments for DCN35") [Why & How] Urgent latency increase caused 2.8K OLED monitor caused it to block this panel support P0. Reverting this change does not reintroduce the netflix corruption issue which it fixed. Fixes: 284f141f5ce5 ("drm/amd/display: Enable urgent latency adjustments for DCN35") Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Nicholas Susanto <Nicholas.Susanto@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: Add SMU interface to get UMC count for dcn401Dillon Varone
[WHY&HOW] BIOS table will not always contain accurate UMC channel info when harvesting is enabled, so get the correct info from SMU. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: Initialize denominator defaults to 1Alex Hung
[WHAT & HOW] Variables, used as denominators and maybe not assigned to other values, should be initialized to non-zero to avoid DIVIDE_BY_ZERO, as reported by Coverity. Reviewed-by: Austin Zheng <austin.zheng@amd.com> Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: Extend secure display to support DisplayCRC modeWayne Lin
[Why] For the legacy secure display, it involves PSP + DMUB to confgiure and retrieve the CRC/ROI result. Have requirement to support mode which all handled by driver only. [How] Add another "DisplayCRC" mode, which doesn't involve PSP + DMUB. All things are handled by the driver only Reviewed-by: HaoPing Liu <haoping.liu@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: Add support to configure CRC window on specific CRC instanceWayne Lin
[Why] Have the need to specify the CRC window on specific CRC engine. dc_stream_configure_crc() today calculates CRC on crc engine 0 only and always resets CRC engine at first. [How] Add index parameter to dc_stream_configure_crc() for selecting the desired crc engine. Additionally, add another parameter to specify whether to skip the default reset of crc engine. Reviewed-by: HaoPing Liu <haoping.liu@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: Reduce accessing remote DPCD overheadWayne Lin
[Why] Observed frame rate get dropped by tool like glxgear. Even though the output to monitor is 60Hz, the rendered frame rate drops to 30Hz lower. It's due to code path in some cases will trigger dm_dp_mst_is_port_support_mode() to read out remote Link status to assess the available bandwidth for dsc maniplation. Overhead of keep reading remote DPCD is considerable. [How] Store the remote link BW in mst_local_bw and use end-to-end full_pbn as an indicator to decide whether update the remote link bw or not. Whenever we need the info to assess the BW, visit the stored one first. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3720 Fixes: fa57924c76d9 ("drm/amd/display: Refactor function dm_dp_mst_is_port_support_mode()") Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: Validate mdoe under MST LCT=1 case as wellWayne Lin
[Why & How] Currently in dm_dp_mst_is_port_support_mode(), when valdidating mode under dsc decoding at the last DP link config, we only validate the case when there is an UFP. However, if the MSTB LCT=1, there is no UFP. Under this case, use root_link_bw_in_kbps as the available bw to compare. Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3720 Fixes: fa57924c76d9 ("drm/amd/display: Refactor function dm_dp_mst_is_port_support_mode()") Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: DML2.1 Post-Si CleanupRafal Ostrowski
[Why] There are a few cleanup and refactoring tasks that need to be done with the DML2.1 wrapper and DC interface to remove dependencies on legacy structures and N-1 prototypes. [How] Implemented pipe_ctx->global_sync. Implemented new functions to use pipe_ctx->hubp_regs and pipe_ctx->global_sync: - hubp_setup2 - hubp_setup_interdependent2 - Several other new functions for DCN 4.01 to support newer structures Removed dml21_update_pipe_ctx_dchub_regs Removed dml21_extract_legacy_watermark_set Removed dml21_populate_pipe_ctx_dlg_param Removed outdated dcn references in DML2.1 wrapper. Reviewed-by: Austin Zheng <austin.zheng@amd.com> Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Rafal Ostrowski <rostrows@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: Update chip_cap defines and usageMichael Strauss
[WHY] The defines have also been updated with prefix AMD_ and atomfirmware.h has been temporarily updated with both sets of defines to allow the transition. This update is being made to standardize workaround chip_cap flags, in order to support more workaround flags in the future. [HOW] Updated EXT_DISPLAY_PATH_CAPS__DP_FIXED_VS_EN define, the flag is now an enum masked by EXT_DISPLAY_PATH_CAPS__EXT_CHIP_MASK. All checks for DP_FIXED_VS_EN are now performed by masking with EXT_CHIP_MASK and checking for an exact match rather than the previous bitwise AND check. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: [FW Promotion] Release 0.0.248.0Taimur Hassan
Refactoring some flags for replay Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: Add replay desync error count tracking and reset functionalityJack Chang
[Why & How] Build-up get/reset desync error count interface and implement the functions. Reviewed-by: ChunTao Tso <chuntao.tso@amd.com> Reviewed-by: Robin Chen <robin.chen@amd.com> Signed-off-by: Jack Chang <jack.chang@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: Log Hard Min Clocks and Phantom Pipe StatusSung Lee
[WHY] On entering/exiting idle power, certain parameters would be very useful to know for power profiling purposes. [HOW] This commit adds certain hard min clocks and pipe types to log output on idle optimization enter/exit. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Sung Lee <Sung.Lee@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: Limit Scaling Ratio on DCN3.01Gabe Teeger
[why] Underflow and flickering was occuring due to high scaling ratios when resizing videos. [how] Limit the scaling ratios by increasing the max scaling factor Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Gabe Teeger <Gabe.Teeger@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amdgpu/smu13: update powersave optimizationsAlex Deucher
Only apply when compute profile is selected. This is the only supported configuration. Selecting other profiles can lead to performane degradations. Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: add CEC notifier to amdgpu driverKun Liu
This patch adds the cec_notifier feature to amdgpu driver. The changes will allow amdgpu driver code to notify EDID and HPD changes to an eventual CEC adapter. Signed-off-by: Kun Liu <Kun.Liu2@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-09drm/amdgpu: fill the ucode bo during psp resume for SRIOVVictor Zhao
refill the ucode bo during psp resume for SRIOV, otherwise ucode load will fail after VM hibernation and fb clean. Signed-off-by: Victor Zhao <Victor.Zhao@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-09drm/amdgpu/gfx10: Enable cleaner shader for GFX10.3.2/10.3.4/10.3.5 GPUsSrinivasan Shanmugam
Enable the cleaner shader for GFX10.3.2/10.3.4/10.3.5 GPUs to provide data isolation between GPU workloads. The cleaner shader is responsible for clearing the Local Data Store (LDS), Vector General Purpose Registers (VGPRs), and Scalar General Purpose Registers (SGPRs), which helps prevent data leakage and ensures accurate computation results. This update extends cleaner shader support to GFX10.3.2/10.3.4/10.3.5 GPUs, previously available for GFX10.3.0. It enhances security by clearing GPU memory between processes and maintains a consistent GPU state across KGD and KFD workloads. Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-09drm/amdgpu: fix gpu recovery disable with per queue resetJonathan Kim
Per queue reset should be bypassed when gpu recovery is disabled with module parameter. Fixes: ee0a469cf917 ("drm/amdkfd: support per-queue reset on gfx9") Signed-off-by: Jonathan Kim <jonathan.kim@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-09drm/amdgpu: wrong array index to get ip block for PSPJiang Liu
The adev->ip_blocks array is not indexed by AMD_IP_BLOCK_TYPE_xxx, instead we should call amdgpu_device_ip_get_ip_block() to get the corresponding IP block oject. Fix some checkpatch issues (Alex) Signed-off-by: Jiang Liu <gerry@linux.alibaba.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-09drm/amdgpu: tear down ttm range manager for doorbell in amdgpu_ttm_fini()Jiang Liu
Tear down ttm range manager for doorbell in function amdgpu_ttm_fini(), to avoid memory leakage. Fixes: 792b84fb9038 ("drm/amdgpu: initialize ttm for doorbells") Signed-off-by: Jiang Liu <gerry@linux.alibaba.com> Signed-off-by: Kent Russell <kent.russell@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-09drm/amdgpu: fix incorrect number of active RBs for gfx12Tim Huang
The RB bitmap should be global active RB bitmap & active RB bitmap based on active SA. Signed-off-by: Tim Huang <tim.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-09drm/amdgpu: fix incorrect active RB bitmap in setup RBsTim Huang
The RB bitmap width per SA may be 0x1 for some ASICs. Use the actual bitmap of SA instead of 0x3 to determine the active RB bitmap. Signed-off-by: Tim Huang <tim.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-09drm/amdkfd: Move gfx12 trap handler to separate fileJay Cornwall
gfx12 derivatives will have substantially different trap handler implementations from gfx10/gfx11. Add a separate source file for gfx12+ and remove unneeded conditional code. No functional change. v2: Revert copyright date to 2018, minor comment fixes Signed-off-by: Jay Cornwall <jay.cornwall@amd.com> Reviewed-by: Lancelot Six <lancelot.six@amd.com> Cc: Jonathan Kim <jonathan.kim@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-09drm/amdgpu: Fix shift type in amdgpu_debugfs_sdma_sched_mask_set()Dan Carpenter
The "mask" and "val" variables are type u64. The problem is that the BIT() macros are type unsigned long which is just 32 bits on 32bit systems. It's unlikely that people will be using this driver on 32bit kernels and even if they did we only use the lower AMDGPU_MAX_SDMA_INSTANCES (16) bits. So this bug does not affect anything in real life. Still, for correctness sake, u64 bit masks should use BIT_ULL(). Fixes: d2e3961ae371 ("drm/amdgpu: add amdgpu_sdma_sched_mask debugfs") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/d39a9325-87a4-4543-b6ec-1c61fca3a6fc@stanley.mountain Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-09drm/amdgpu: enable gfx12 queue reset flagJesse Zhang
Enable the kgq and kcq queue reset flag Signed-off-by: Jesse Zhang <jesse.zhang@amd.com> Reviewed-by: Tim Huang <tim.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-09drm/amd/display: Increase sanitizer frame larger than limit when compile ↵Nathan Chancellor
testing with clang Commit 24909d9ec7c3 ("drm/amd/display: Overwriting dualDPP UBF values before usage") added a new warning in dml2/display_mode_core.c when building allmodconfig with clang: drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/display_mode_core.c:6268:13: error: stack frame size (3128) exceeds limit (3072) in 'dml_prefetch_check' [-Werror,-Wframe-larger-than] 6268 | static void dml_prefetch_check(struct display_mode_lib_st *mode_lib) | ^ Commit be4e3509314a ("drm/amd/display: DML21 Reintegration For Various Fixes") introduced one in dml2_core/dml2_core_dcn4_calcs.c with the same configuration: drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/dml21/src/dml2_core/dml2_core_dcn4_calcs.c:7236:13: error: stack frame size (3256) exceeds limit (3072) in 'dml_core_mode_support' [-Werror,-Wframe-larger-than] 7236 | static bool dml_core_mode_support(struct dml2_core_calcs_mode_support_ex *in_out_params) | ^ In the case of the first warning, the stack usage was already at the limit at the parent change, so the offending change was rather innocuous. In the case of the second warning, there was a rather dramatic increase in stack usage compared to the parent: drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/dml21/src/dml2_core/dml2_core_dcn4_calcs.c:7032:13: error: stack frame size (2696) exceeds limit (2048) in 'dml_core_mode_support' [-Werror,-Wframe-larger-than] 7032 | static bool dml_core_mode_support(struct dml2_core_calcs_mode_support_ex *in_out_params) | ^ This is an unfortunate interaction between an issue with stack slot reuse in LLVM that gets exacerbated by sanitization (which gets enabled with all{mod,yes}config) and function calls using a much higher number of parameters than is typical in the kernel, necessitating passing most of these values on the stack. While it is possible that there should be source code changes to address these warnings, this code is difficult to modify for various reasons, as has been noted in other changes that have occurred for similar reasons, such as commit 6740ec97bcdb ("drm/amd/display: Increase frame warning limit with KASAN or KCSAN in dml2"). Increase the frame larger than limit when compile testing with clang and the sanitizers enabled to avoid this breakage in all{mod,yes}config, as they are commonly used and valuable testing targets. While it is not the best to hide this issue, it is not really relevant when compile testing, as the sanitizers are commonly stressful on optimizations and they are only truly useful at runtime, which COMPILE_TEST states will not occur with the current build. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202412121748.chuX4sap-lkp@intel.com/ Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-09drm/amdgpu/pm: Implement SDMA queue reset for different asicJesse Zhang
Implement sdma queue reset by SMU_MSG_ResetSDMA2 Signed-off-by: Jesse Zhang <jesse.zhang@amd.com> Suggested-by: Tim Huang <tim.huang@amd.com> Reviewed-by: Tim Huang <tim.huang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-09drm/amdgpu/pm: add definition PPSMC_MSG_ResetSDMA2Jesse Zhang
add the PPSMC_MSG_ResetSDMA2 definition for smu 13.0.6 Signed-off-by: Jesse Zhang <jesse.zhang@amd.com> Reviewed-by: Tim Huang <tim.huang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-09drm/amdgpu/sdma4.4.2: add apu support in sdma queue resetJesse Zhang
Remove apu check in sdma queue reset. Signed-off-by: Jesse Zhang <jesse.zhang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-06drm/amdgpu: Remove unnecessary NULL checkKent Russell
container_of cannot return NULL, so it is unnecessary to check for NULL after gem_to_amdgpu_bo, which is just a container_of call Signed-off-by: Kent Russell <kent.russell@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-06drm/amd/pm: Fill max mem bw & total app clk counterAsad Kamal
Fill max memory bandwidth and total app clock counter to metrics v1_7 v2: Remove unnecessary check v3: Add app clock counter support for apu Signed-off-by: Asad Kamal <asad.kamal@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-06drm/amd/pm: Update SMUv13.0.6 PMFW headersAsad Kamal
Update pmfw headers for smuv13.0.6 to pmfw version 85.121 Signed-off-by: Asad Kamal <asad.kamal@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-06drm/amdgpu: Add a lock when accessing the buddy trim functionArunpravin Paneer Selvam
When running YouTube videos and Steam games simultaneously, the tester found a system hang / race condition issue with the multi-display configuration setting. Adding a lock to the buddy allocator's trim function would be the solution. <log snip> [ 7197.250436] general protection fault, probably for non-canonical address 0xdead000000000108 [ 7197.250447] RIP: 0010:__alloc_range+0x8b/0x340 [amddrm_buddy] [ 7197.250470] Call Trace: [ 7197.250472] <TASK> [ 7197.250475] ? show_regs+0x6d/0x80 [ 7197.250481] ? die_addr+0x37/0xa0 [ 7197.250483] ? exc_general_protection+0x1db/0x480 [ 7197.250488] ? drm_suballoc_new+0x13c/0x93d [drm_suballoc_helper] [ 7197.250493] ? asm_exc_general_protection+0x27/0x30 [ 7197.250498] ? __alloc_range+0x8b/0x340 [amddrm_buddy] [ 7197.250501] ? __alloc_range+0x109/0x340 [amddrm_buddy] [ 7197.250506] amddrm_buddy_block_trim+0x1b5/0x260 [amddrm_buddy] [ 7197.250511] amdgpu_vram_mgr_new+0x4f5/0x590 [amdgpu] [ 7197.250682] amdttm_resource_alloc+0x46/0xb0 [amdttm] [ 7197.250689] ttm_bo_alloc_resource+0xe4/0x370 [amdttm] [ 7197.250696] amdttm_bo_validate+0x9d/0x180 [amdttm] [ 7197.250701] amdgpu_bo_pin+0x15a/0x2f0 [amdgpu] [ 7197.250831] amdgpu_dm_plane_helper_prepare_fb+0xb2/0x360 [amdgpu] [ 7197.251025] ? try_wait_for_completion+0x59/0x70 [ 7197.251030] drm_atomic_helper_prepare_planes.part.0+0x2f/0x1e0 [ 7197.251035] drm_atomic_helper_prepare_planes+0x5d/0x70 [ 7197.251037] drm_atomic_helper_commit+0x84/0x160 [ 7197.251040] drm_atomic_nonblocking_commit+0x59/0x70 [ 7197.251043] drm_mode_atomic_ioctl+0x720/0x850 [ 7197.251047] ? __pfx_drm_mode_atomic_ioctl+0x10/0x10 [ 7197.251049] drm_ioctl_kernel+0xb9/0x120 [ 7197.251053] ? srso_alias_return_thunk+0x5/0xfbef5 [ 7197.251056] drm_ioctl+0x2d4/0x550 [ 7197.251058] ? __pfx_drm_mode_atomic_ioctl+0x10/0x10 [ 7197.251063] amdgpu_drm_ioctl+0x4e/0x90 [amdgpu] [ 7197.251186] __x64_sys_ioctl+0xa0/0xf0 [ 7197.251190] x64_sys_call+0x143b/0x25c0 [ 7197.251193] do_syscall_64+0x7f/0x180 [ 7197.251197] ? srso_alias_return_thunk+0x5/0xfbef5 [ 7197.251199] ? amdgpu_display_user_framebuffer_create+0x215/0x320 [amdgpu] [ 7197.251329] ? drm_internal_framebuffer_create+0xb7/0x1a0 [ 7197.251332] ? srso_alias_return_thunk+0x5/0xfbef5 Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com> Fixes: 4a5ad08f5377 ("drm/amdgpu: Add address alignment support to DCC buffers") Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-06drm/amdkfd: always include uapi header in priv.hZhu Lingshan
The header usr/linux/kfd_ioctl.h is a duplicate of uapi/linux/kfd_ioctl.h. And it is actually not a file in the source code tree. Ideally, the usr version should be updated whenever the source code is recompiled. However, I have noticed a discrepancy between the two headers even after rebuilding the kernel. This commit modifies kfd_priv.h to always include the header from uapi to ensure the latest changes are reflected. We should always include the source code header other than the duplication. Signed-off-by: Zhu Lingshan <lingshan.zhu@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-06drm/amdgpu: reduce RLC safe mode request for gfx clock gatingPrike Liang
The driver can only request one time for the power safe mode instead of polling and disabling the power feature each time prior to program the GFX clock gating control registers. This update will reduce the latency on the GFX clock gating entry. Signed-off-by: Prike Liang <Prike.Liang@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-06Revert "drm/amd/display: Optimize cursor position updates"Aurabindo Pillai
This reverts commit 88c7c56d07c108ed4de319c8dba44aa4b8a38dd1. SW and HW state are not always matching in some cases causing cursor to be disabled. Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-06drm/amdgpu/gfx10: Add cleaner shader for GFX10.3.0Srinivasan Shanmugam
This commit adds the cleaner shader microcode for GFX10.3.0 GPUs. The cleaner shader is a piece of GPU code that is used to clear or initialize certain GPU resources, such as Local Data Share (LDS), Vector General Purpose Registers (VGPRs), and Scalar General Purpose Registers (SGPRs). Clearing these resources is important for ensuring data isolation between different workloads running on the GPU. Without the cleaner shader, residual data from a previous workload could potentially be accessed by a subsequent workload, leading to data leaks and incorrect computation results. The cleaner shader microcode is represented as an array of 32-bit words (`gfx_10_3_0_cleaner_shader_hex`). This array is the binary representation of the cleaner shader code, which is written in a low-level GPU instruction set. When the cleaner shader feature is enabled, the AMDGPU driver loads this array into a specific location in the GPU memory. The GPU then reads this memory location to fetch and execute the cleaner shader instructions. The cleaner shader is executed automatically by the GPU at the end of each workload, before the next workload starts. This ensures that all GPU resources are in a clean state before the start of each workload. This addition is part of the cleaner shader feature implementation. The cleaner shader feature helps resource utilization by cleaning up GPU resources after they are used. It also enhances security and reliability by preventing data leaks between workloads. Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-06drm/amd/pm: fix BUG: scheduling while atomicKun Liu
atomic scheduling will be triggered in interrupt handler for AC/DC mode switch as following backtrace. Call Trace: <IRQ> dump_stack_lvl __schedule_bug __schedule schedule schedule_preempt_disabled __mutex_lock smu_cmn_send_smc_msg_with_param smu_v13_0_irq_process amdgpu_irq_dispatch amdgpu_ih_process amdgpu_irq_handler __handle_irq_event_percpu handle_irq_event handle_edge_irq __common_interrupt common_interrupt </IRQ> <TASK> asm_common_interrupt Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Kun Liu <Kun.Liu2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-06drm/amdgpu: Fix error handling in amdgpu_ras_add_bad_pagesSrinivasan Shanmugam
It ensures that appropriate error codes are returned when an error condition is detected Fixes the below; drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c:2849 amdgpu_ras_add_bad_pages() warn: missing error code here? 'amdgpu_umc_pages_in_a_row()' failed. drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c:2884 amdgpu_ras_add_bad_pages() warn: missing error code here? 'amdgpu_ras_mca2pa()' failed. v2: s/-EIO/-EINVAL, retained the use of -EINVAL from amdgpu_umc_pages_in_a_row & and amdgpu_ras_mca2pa_by_idx, when the RAS context is not initialized or the convert_ras_err_addr function is unavailable. (Thomas) V3: Returning 0 as the absence of eh_data is acceptable. (Tao) Fixes: a8d133e625ce ("drm/amdgpu: parse legacy RAS bad page mixed with new data in various NPS modes") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Cc: YiPeng Chai <yipeng.chai@amd.com> Cc: Tao Zhou <tao.zhou1@amd.com> Cc: Hawking Zhang <Hawking.Zhang@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.34.1) at 2025-09-09 16:10:45 +0000