summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-03-26scsi: ufs: Do not rely on prefetched dataCan Guo
We were setting bActiveICCLevel attribute for UFS device only once but the type of this attribute has changed from persistent to volatile since UFS device specification v2.1. This attribute is set to the default value after power cycle or hardware reset event. It isn't safe to rely on prefetched data (only used for bActiveICCLevel attribute now). Hence this change removes the code related to data prefetching and set this parameter on every attempt to probe the UFS device. Tested-by: Stanley Chu <stanley.chu@mediatek.com> Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Can Guo <cang@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-26Merge branch 'cls_flower-Use-extack-in-fl_set_key'David S. Miller
Guillaume Nault says: ==================== cls_flower: Use extack in fl_set_key() Add missing extack messages in fl_set_key(), so that users can get more meaningfull error messages when netlink attributes are rejected. Patch 1 also extends extack in tcf_change_indev() (in pkt_cls.h) since this function is used by fl_set_key(). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26cls_flower: Add extack support for flags keyGuillaume Nault
Pass extack down to fl_set_key_flags() and set message on error. Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26cls_flower: Add extack support for src and dst port range optionsGuillaume Nault
Pass extack down to fl_set_key_port_range() and set message on error. Both the min and max ports would qualify as invalid attributes here. Report the min one as invalid, as it's probably what makes the most sense from a user point of view. Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26cls_flower: Add extack support for mpls optionsGuillaume Nault
Pass extack down to fl_set_key_mpls() and set message on error. Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26net: sched: refine extack messages in tcf_change_indevGuillaume Nault
Add an error message when device wasn't found. While there, also set the bad attribute's offset in extack. Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26scsi: dc395x: remove dc395x_bios_paramChristoph Hellwig
dc395x_bios_param was only different from the default when the CONFIG_SCSI_DC395x_TRMS1040_TRADMAP symbol is true, but that symbol doesn't exist in the Kconfig system and thus can't be set. Link: https://lore.kernel.org/r/20200325105505.1028582-1-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-26Merge branch 'net-phy-marvell-usb-to-mdio-controller'David S. Miller
Tobias Waldekranz says: ==================== net: phy: marvell usb to mdio controller Support for an MDIO controller present on development boards for Marvell switches from the Link Street (88E6xxx) family. v3->v4: - Remove unnecessary dependency on OF_MDIO. v2->v3: - Rename driver smi2usb -> mvusb. - Clean up unused USB references. v1->v2: - Reverse christmas tree ordering of local variables. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26net: phy: add marvell usb to mdio controllerTobias Waldekranz
An MDIO controller present on development boards for Marvell switches from the Link Street (88E6xxx) family. Using this module, you can use the following setup as a development platform for switchdev and DSA related work. .-------. .-----------------. | USB----USB | | SoC | | 88E6390X-DB ETH1-10 | ETH----ETH0 | '-------' '-----------------' Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26dt-bindings: net: add marvell usb to mdio bindingsTobias Waldekranz
Describe how the USB to MDIO controller can optionally use device tree bindings to reference attached devices such as switches. Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26scsi: libiscsi: Fix error count for active sessionWu Bo
Fix an error count for active session if the total_cmds is invalid on the function iscsi_session_setup(). Decrement the number of active sessions before the funcion return. Link: https://lore.kernel.org/r/EDBAAA0BBBA2AC4E9C8B6B81DEEE1D6916A28542@DGGEML525-MBS.china.huawei.com Reviewed-by: Lee Duncan <lduncan@suuse.com> Signed-off-by: Wu Bo <wubo40@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-26scsi: hpsa: correct race condition in offload enabledDon Brace
Correct race condition where ioaccel is re-enabled before the raid_map is updated. For RAID_1, RAID_1ADM, and RAID 5/6 there is a BUG_ON called which is bad. - Change event thread to disable ioaccel only. Send all requests down the RAID path instead. - Have rescan thread handle offload_enable. - Since there is only one rescan allowed at a time, turning offload_enabled on/off should not be racy. Each handler queues up a rescan if one is already in progress. - For timing diagram, offload_enabled is initially off due to a change (transformation: splitmirror/remirror), ... otbe = offload_to_be_enabled oe = offload_enabled Time Event Rescan Completion Request Worker Worker Thread Thread ---- ------ ------ ---------- ------- T0 | | + UA | T1 | + rescan started | 0x3f | T2 + Event | | 0x0e | T3 + Ack msg | | | T4 | + if (!dev[i]->oe && | | T5 | | dev[i]->otbe) | | T6 | | get_raid_map | | T7 + otbe = 1 | | | T8 | | | | T9 | + oe = otbe | | T10 | | | + ioaccel request T11 * BUG_ON T0 - I/O completion with UA 0x3f 0x0e sets rescan flag. T1 - rescan worker thread starts a rescan. T2 - event comes in T3 - event thread starts and issues "Acknowledge" message ... T6 - rescan thread has bypassed code to reload new raid map. ... T7 - event thread runs and sets offload_to_be_enabled ... T9 - rescan thread turns on offload_enabled. T10- request comes in and goes down ioaccel path. T11- BUG_ON. - After the patch is applied, ioaccel_enabled can only be re-enabled in the re-scan thread. Link: https://lore.kernel.org/r/158472877894.14200.7077843399036368335.stgit@brunhilda Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Matt Perricone <matt.perricone@microsemi.com> Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-26net: phy: probe PHY drivers synchronouslyHeiner Kallweit
If we have scenarios like mdiobus_register() -> loads PHY driver module(s) -> registers PHY driver(s) -> may schedule async probe phydev = mdiobus_get_phy() <phydev action involving PHY driver> or phydev = phy_device_create() -> loads PHY driver module -> registers PHY driver -> may schedule async probe <phydev action involving PHY driver> then we expect the PHY driver to be bound to the phydev when triggering the action. This may not be the case in case of asynchronous probing. Therefore ensure that PHY drivers are probed synchronously. Default still is sync probing, except async probing is explicitly requested. I saw some comments that the intention is to promote async probing for more parallelism in boot process and want to be prepared for the case that the default is changed to async probing. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26scsi: message: fusion: Replace zero-length array with flexible-array memberGustavo A. R. Silva
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Link: https://lore.kernel.org/r/20200319222533.GA20577@embeddedor.com Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-26Merge branch 'implement-DEVLINK_CMD_REGION_NEW'David S. Miller
Jacob Keller says: ==================== implement DEVLINK_CMD_REGION_NEW This series adds support for the DEVLINK_CMD_REGION_NEW operation, used to enable userspace requesting a snapshot of a region on demand. This can be useful to enable adding regions for a driver for which there is no trigger to create snapshots. By making this a core part of devlink, there is no need for the drivers to use a separate channel such as debugfs. The primary intent for this kind of region is to expose device information that might be useful for diagnostics and information gathering. The first few patches refactor regions to support a new ops structure for extending the available operations that regions can perform. This includes converting the destructor into an op from a function argument. Next, patches refactor the snapshot id allocation to use an xarray which tracks the number of current snapshots using a given id. This is done so that id lifetime can be determined, and ids can be released when no longer in use. Without this change, snapshot ids remain used forever, until the snapshot_id count rolled over UINT_MAX. Finally, code to enable the previously unused DEVLINK_CMD_REGION_NEW is added. This code enforces that the snapshot id is always provided, unlike previous revisions of this series. Finally, a patch is added to enable using this new command via the .snapshot callback in both netdevsim and the ice driver. For the ice driver, a new "nvm-flash" region is added, which will enable read access to the NVM flash contents. The intention for this is to allow diagnostics tools to gather information about the device. By using a snapshot and gathering the NVM contents all at once, the contents can be atomic. Links to previous discussions: 1st RFC - https://lore.kernel.org/netdev/20200130225913.1671982-1-jacob.e.keller@intel.com/ 2nd RFC - https://lore.kernel.org/netdev/20200214232223.3442651-1-jacob.e.keller@intel.com/ v1 - https://lore.kernel.org/netdev/20200324223445.2077900-1-jacob.e.keller@intel.com/ v2 - https://lore.kernel.org/netdev/20200326035157.2211090-1-jacob.e.keller@intel.com/ Major changes since RFC: * use an xarray for tracking snapshot ids, rather than an IDR * remove support for auto-generated snapshot ids in DEVLINK_CMD_REGION_NEW See each patch for an individual changelog per-patch ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26ice: add a devlink region for dumping NVM contentsJacob Keller
Add a devlink region for exposing the device's Non Volatime Memory flash contents. Support the recently added .snapshot operation, enabling userspace to request a snapshot of the NVM contents via DEVLINK_CMD_REGION_NEW. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26netdevsim: support taking immediate snapshot via devlinkJacob Keller
Implement the .snapshot region operation for the dummy data region. This enables a region snapshot to be taken upon request via the new DEVLINK_CMD_REGION_SNAPSHOT command. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26devlink: implement DEVLINK_CMD_REGION_NEWJacob Keller
Implement support for the DEVLINK_CMD_REGION_NEW command for creating snapshots. This new command parallels the existing DEVLINK_CMD_REGION_DEL. In order for DEVLINK_CMD_REGION_NEW to work for a region, the new ".snapshot" operation must be implemented in the region's ops structure. The desired snapshot id must be provided. This helps avoid confusion on the purpose of DEVLINK_CMD_REGION_NEW, and keeps the API simpler. The requested id will be inserted into the xarray tracking the number of snapshots using each id. If this id is already used by another snapshot on any region, an error will be returned. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26devlink: track snapshot id usage count using an xarrayJacob Keller
Each snapshot created for a devlink region must have an id. These ids are supposed to be unique per "event" that caused the snapshot to be created. Drivers call devlink_region_snapshot_id_get to obtain a new id to use for a new event trigger. The id values are tracked per devlink, so that the same id number can be used if a triggering event creates multiple snapshots on different regions. There is no mechanism for snapshot ids to ever be reused. Introduce an xarray to store the count of how many snapshots are using a given id, replacing the snapshot_id field previously used for picking the next id. The devlink_region_snapshot_id_get() function will use xa_alloc to insert an initial value of 1 value at an available slot between 0 and U32_MAX. The new __devlink_snapshot_id_increment() and __devlink_snapshot_id_decrement() functions will be used to track how many snapshots currently use an id. Drivers must now call devlink_snapshot_id_put() in order to release their reference of the snapshot id after adding region snapshots. By tracking the total number of snapshots using a given id, it is possible for the decrement() function to erase the id from the xarray when it is not in use. With this method, a snapshot id can become reused again once all snapshots that referred to it have been deleted via DEVLINK_CMD_REGION_DEL, and the driver has finished adding snapshots. This work also paves the way to introduce a mechanism for userspace to request a snapshot. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26devlink: report error once U32_MAX snapshot ids have been usedJacob Keller
The devlink_snapshot_id_get() function returns a snapshot id. The snapshot id is a u32, so there is no way to indicate an error code. A future change is going to possibly add additional cases where this function could fail. Refactor the function to return the snapshot id in an argument, so that it can return zero or an error value. This ensures that snapshot ids cannot be confused with error values, and aids in the future refactor of snapshot id allocation management. Because there is no current way to release previously used snapshot ids, add a simple check ensuring that an error is reported in case the snapshot_id would over flow. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26devlink: extract snapshot id allocation to helper functionJacob Keller
A future change is going to implement a new devlink command to request a snapshot on demand. As part of this, the logic for handling the snapshot ids will be refactored. To simplify the snapshot id allocation function, move it to a separate function prefixed by `__`. This helper function will assume the lock is held. While no other callers will exist, it simplifies refactoring the logic because there is no need to complicate the function with gotos to handle unlocking on failure. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26devlink: use -ENOSPC to indicate no more room for snapshotsJacob Keller
The devlink_region_snapshot_create function returns -ENOMEM when the maximum number of snapshots has been reached. This is confusing because it is not an issue of being out of memory. Change this to use -ENOSPC instead. Reported-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26devlink: add function to take snapshot while lockedJacob Keller
A future change is going to add a new devlink command to request a snapshot on demand. This function will want to call the devlink_region_snapshot_create function while already holding the devlink instance lock. Extract the logic of this function into a static function prefixed by `__` to indicate that it is an internal helper function. Modify the original function to be implemented in terms of the new locked function. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26devlink: trivial: fix tab in function documentationJacob Keller
The function documentation comment for devlink_region_snapshot_create included a literal tab character between 'future analyses' that was difficult to spot as it happened to only display as one space wide. Fix the comment to use a space here instead of a stray tab appearing in the middle of a sentence. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26devlink: convert snapshot destructor callback to region opJacob Keller
It does not makes sense that two snapshots for a given region would use different destructors. Simplify snapshot creation by adding a .destructor op for regions. This operation will replace the data_destructor for the snapshot creation, and makes snapshot creation easier. Noticed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26devlink: prepare to support region operationsJacob Keller
Modify the devlink region code in preparation for adding new operations on regions. Create a devlink_region_ops structure, and move the name pointer from within the devlink_region structure into the ops structure (similar to the devlink_health_reporter_ops). This prepares the regions to enable support of additional operations in the future such as requesting snapshots, or accessing the region directly without a snapshot. In order to re-use the constant strings in the mlx4 driver their declaration must be changed to 'const char * const' to ensure the compiler realizes that both the data and the pointer cannot change. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26scsi: qedi: Add PCI shutdown handler supportManish Rangankar
Add PCI shutdown handler support for supporting wake-on-lan feature. Link: https://lore.kernel.org/r/20200319083811.19499-3-mrangankar@marvell.com Signed-off-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-26scsi: qedi: Add MFW error recovery processManish Rangankar
This patch adds the mfw error recovery process in the qedi driver. The process includes a partial/customized driver unload and load to reset context by preserving active iSCSI session kernel state. Link: https://lore.kernel.org/r/20200319083811.19499-2-mrangankar@marvell.com Signed-off-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-26Merge branch 'veth-stats'David S. Miller
Lorenzo Bianconi says: ==================== veth: move ndo_xdp_xmit stats to peer veth_rq Move ndo_xdp_xmit ethtool stats accounting to peer veth_rq. Move XDP_TX accounting to veth_xdp_flush_bq routine. Changes since v1: - rename xdp_xmit[_err] counters to peer_tq_xdp_xmit[_err] ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26veth: rely on peer veth_rq for ndo_xdp_xmit accountingLorenzo Bianconi
Rely on 'remote' veth_rq to account ndo_xdp_xmit ethtool counters. Move XDP_TX accounting to veth_xdp_flush_bq routine. Remove 'rx' prefix in rx xdp ethool counters Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Acked-by: Toshiaki Makita <toshiaki.makita1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26veth: rely on veth_rq in veth_xdp_flush_bq signatureLorenzo Bianconi
Substitute net_device point with veth_rq one in veth_xdp_flush_bq, veth_xdp_flush and veth_xdp_tx signature. This is a preliminary patch to account xdp_xmit counter on 'receiving' veth_rq Acked-by: Toshiaki Makita <toshiaki.makita1@gmail.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-27Merge tag 'drm-misc-fixes-2020-03-26' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes drm-misc-fixes for v5.6: - SG fixes for prime, radeon and amdgpu. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ef10e822-76dd-125d-ec1f-9a78c5f76bc3@linux.intel.com
2020-03-26sfc: falcon: convert to use i2c_new_client_device()Wolfram Sang
Move away from the deprecated API and return the shiny new ERRPTR where useful. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26igb: convert to use i2c_new_client_device()Wolfram Sang
Move away from the deprecated API and return the shiny new ERRPTR where useful. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26scsi: ufs: Enable block layer runtime PM for well-known logical unitsCan Guo
Block layer RPM is enabled for the genernal UFS SCSI devices when they are probed by their driver. However block layer RPM is not enabled for UFS well-known SCSI devices. As UFS SCSI devices have their corresponding BSG char devices, accessing a BSG char device via IOCTL may send requests to its corresponding SCSI device through its request queue. If BSG IOCTL sends a request to a well-known SCSI device when HBA is not runtime active, due to block layer RPM not being enabled for the well-known SCSI devices, the HBA, which is at the top of a SCSI device's parent chain, will not be resumed. This change enables block layer RPM for the well-known SCSI devices so that block layer can handle RPM for the well-known SCSI devices just like for the general SCSI devices. Reviewed-by: Avri Altman <avri.altman@wdc.com> Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Can Guo <cang@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-26RISC-V: Move all address space definition macros to one placeAtish Patra
We get the following compilation error if CONFIG_SPARSEMEM_VMEMMAP is set. --------------------------------------------------------------- ./arch/riscv/include/asm/pgtable-64.h: In function ‘pud_page’: ./include/asm-generic/memory_model.h:54:29: error: ‘vmemmap’ undeclared (first use in this function); did you mean ‘mem_map’? #define __pfn_to_page(pfn) (vmemmap + (pfn)) ^~~~~~~ ./include/asm-generic/memory_model.h:82:21: note: in expansion of macro ‘__pfn_to_page’ #define pfn_to_page __pfn_to_page ^~~~~~~~~~~~~ ./arch/riscv/include/asm/pgtable-64.h:70:9: note: in expansion of macro ‘pfn_to_page’ return pfn_to_page(pud_val(pud) >> _PAGE_PFN_SHIFT); --------------------------------------------------------------- Fix the compliation errors by moving all the address space definition macros before including pgtable-64.h. Fixes: 8ad8b72721d0 (riscv: Add KASAN support) Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-26Merge branch 'Implement-stats_update-callback-for-pedit-and-skbedit'David S. Miller
Petr Machata says: ==================== Implement stats_update callback for pedit and skbedit The stats_update callback is used for adding HW counters to the SW ones. Both skbedit and pedit actions are actually recognized by flow_offload.h, but do not implement these callbacks. As a consequence, the reported values are only the SW ones, even where there is a HW counter available. Patch #1 adds the callback to action skbedit, patch #2 adds it to action pedit. Patch #3 tweaks an skbedit selftest with a check that would have caught this problem. The pedit test is not likewise tweaked, because the iproute2 pedit action currently does not support JSON dumping. This will be addressed later. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26selftests: skbedit_priority: Test counters at the skbedit rulePetr Machata
Currently the test checks the observable effect of skbedit priority: queueing of packets at the correct qdisc band. It therefore misses the fact that the counters for offloaded rules are not updated. Add an extra check for the counter. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26sched: act_pedit: Implement stats_update callbackPetr Machata
Implement this callback in order to get the offloaded stats added to the kernel stats. Reported-by: Alexander Petrovskiy <alexpe@mellanox.com> Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26sched: act_skbedit: Implement stats_update callbackPetr Machata
Implement this callback in order to get the offloaded stats added to the kernel stats. Reported-by: Alexander Petrovskiy <alexpe@mellanox.com> Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26scsi: ufs-qcom: Override devfreq parametersAsutosh Das
Override devfreq parameters for power-performance trade-off. Link: https://lore.kernel.org/r/b6875729b6072134985c9113a820cf60a2af22e7.1585160616.git.asutoshd@codeaurora.org Acked-by: Avri Altman <Avri.Altman@wdc.com> Signed-off-by: Asutosh Das <asutoshd@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-26scsi: ufshcd: Let vendor override devfreq parametersAsutosh Das
Vendor drivers may have a need to update the polling interval and thresholds. Provide a vops for vendor drivers to use. Link: https://lore.kernel.org/r/acd79e00396cff855256adad47f615ccdbde85ac.1585160616.git.asutoshd@codeaurora.org Acked-by: Avri Altman <Avri.Altman@wdc.com> Signed-off-by: Asutosh Das <asutoshd@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-26scsi: ufshcd: Update the set frequency to devfreqAsutosh Das
Currently, the frequency that devfreq provides the driver always leads the clocks to be scaled up. Hence, round the clock-rate to the nearest frequency before deciding to scale. Also update the devfreq statistics of current frequency. Link: https://lore.kernel.org/r/d0c6c22455811e9f0eda01f9bc70d1398b51b2bd.1585160616.git.asutoshd@codeaurora.org Acked-by: Avri Altman <Avri.Altman@wdc.com> Signed-off-by: Asutosh Das <asutoshd@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-26scsi: ufs: Resume ufs host before accessing ufs deviceNitin Rawat
As a part of sysfs reading of descriptors/attributes/flags, query commands should only be executed when hba's power runtime status is active. To guarantee this, add pm_runtime_get/put_sync() to those paths where query commands are sent. Link: https://lore.kernel.org/r/f712a4f7bdb0ae32e0d83634731e7aaa1b3a6cdd.1585009663.git.asutoshd@codeaurora.org Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Nitin Rawat <nitirawa@codeaurora.org> Signed-off-by: Asutosh Das <asutoshd@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-26scsi: ufs-mediatek: customize the delay for enabling hostStanley Chu
MediaTek platform and UFS controller can dynamically customize the delay for host enabling according to different scenarios. For example, if UniPro enters lower-power mode, such delay can be minimized, otherwise longer delay shall be expected. Link: https://lore.kernel.org/r/20200318104016.28049-8-stanley.chu@mediatek.com Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-26scsi: ufs: make HCE polling more compact to improve initialization latencyStanley Chu
Reduce the waiting period between each HCE (Host Controller Enable) polling from 5 ms to 1 ms. Also increase the maximum polling times to make "total polling time" roughly the same. This change could make HCE initialization faster to improve latency of ufshcd initialization, error recovery, and resume behaviors. Link: https://lore.kernel.org/r/20200318104016.28049-7-stanley.chu@mediatek.com Reviewed-by: Avri Altman <avri.altman@wdc.com> Reviewed-by: Can Guo <cang@codeaurora.org> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-26scsi: ufs: allow custom delay prior to host enablingStanley Chu
Currently a 1 ms delay is applied before polling CONTROLLER_ENABLE bit. This delay may not be required or can be changed in different controllers. Make the delay as a changeable value in struct ufs_hba to allow it customized by vendors. Link: https://lore.kernel.org/r/20200318104016.28049-6-stanley.chu@mediatek.com Reviewed-by: Avri Altman <avri.altman@wdc.com> Reviewed-by: Can Guo <cang@codeaurora.org> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-26scsi: ufs-mediatek: use common delay functionStanley Chu
A common delay function is introduced in UFS core driver, thus ufs-mediatek can use it instead of the private delay function. Link: https://lore.kernel.org/r/20200318104016.28049-5-stanley.chu@mediatek.com Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-26scsi: ufs: introduce common and flexible delay functionStanley Chu
Introduce a common delay function to provide flexible way for users to take choices of udelay and usleep_range into consideration according to the required delay time. Link: https://lore.kernel.org/r/20200318104016.28049-4-stanley.chu@mediatek.com Reviewed-by: Avri Altman <avri.altman@wdc.com> Reviewed-by: Can Guo <cang@codeaurora.org> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-26scsi: ufs: use an enum for host capabilitiesStanley Chu
Use an enum to specify the host capabilities instead of #defines inside the structure definition. Link: https://lore.kernel.org/r/20200318104016.28049-3-stanley.chu@mediatek.com Reviewed-by: Avri Altman <avri.altman@wdc.com> Reviewed-by: Can Guo <cang@codeaurora.org> Reviewed-by: Bean Huo <beanhuo@micron.com> Reviewed-by: Asutosh Das <asutoshd@codeaurora.org> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit (git 2.34.1) at 2025-09-23 03:40:34 +0000