summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-09-11Merge branch 'for-6.12/block' into for-6.12/io_uring-discardJens Axboe
* for-6.12/block: (115 commits) block: unpin user pages belonging to a folio at once mm: release number of pages of a folio block: introduce folio awareness and add a bigger size from folio block: Added folio-ized version of bio_add_hw_page() block, bfq: factor out a helper to split bfqq in bfq_init_rq() block, bfq: remove local variable 'bfqq_already_existing' in bfq_init_rq() block, bfq: remove local variable 'split' in bfq_init_rq() block, bfq: remove bfq_log_bfqg() block, bfq: merge bfq_release_process_ref() into bfq_put_cooperator() block, bfq: fix procress reference leakage for bfqq in merge chain block, bfq: fix uaf for accessing waker_bfqq after splitting blk-throttle: support prioritized processing of metadata blk-throttle: remove last_low_overflow_time drbd: Add NULL check for net_conf to prevent dereference in state validation blk-mq: add missing unplug trace event mtip32xx: Remove redundant null pointer checks in mtip_hw_debugfs_init() md: Add new_level sysfs interface zram: Shrink zram_table_entry::flags. zram: Remove ZRAM_LOCK zram: Replace bit spinlocks with a spinlock_t. ...
2024-09-11Merge branch 'pm-cpufreq'Rafael J. Wysocki
Merge cpufreq updates for 6.12-rc1: - Remove LATENCY_MULTIPLIER from cpufreq (Qais Yousef). - Add support for Granite Rapids and Sierra Forest in OOB mode to the intel_pstate cpufreq driver (Srinivas Pandruvada). - Add basic support for CPU capacity scaling on x86 and make the intel_pstate driver set asymmetric CPU capacity on hybrid systems without SMT (Rafael Wysocki). - Add missing MODULE_DESCRIPTION() macros to the powerpc cpufreq driver (Jeff Johnson). - Several OF related cleanups in cpufreq drivers (Rob Herring). - Enable COMPILE_TEST for ARM drivers (Rob Herrring). - Introduce quirks for syscon failures and use socinfo to get revision for TI cpufreq driver (Dhruva Gole, Nishanth Menon). - Minor cleanups in amd-pstate driver (Anastasia Belova, Dhananjay Ugwekar). - Minor cleanups for loongson, cpufreq-dt and powernv cpufreq drivers (Danila Tikhonov, Huacai Chen, and Liu Jing). - Make amd-pstate validate return of any attempt to update EPP limits, which fixes the masking hardware problems (Mario Limonciello). - Move the calculation of the AMD boost numerator outside of amd-pstate, correcting acpi-cpufreq on systems with preferred cores (Mario Limonciello). - Harden preferred core detection in amd-pstate to avoid potential false positives (Mario Limonciello). - Add extra unit test coverage for mode state machine (Mario Limonciello). - Fix an "Uninitialized variables" issue in amd-pstste (Qianqiang Liu). * pm-cpufreq: (35 commits) cpufreq/amd-pstate-ut: Fix an "Uninitialized variables" issue cpufreq/amd-pstate-ut: Add test case for mode switches cpufreq/amd-pstate: Export symbols for changing modes amd-pstate: Add missing documentation for `amd_pstate_prefcore_ranking` cpufreq: amd-pstate: Add documentation for `amd_pstate_hw_prefcore` cpufreq: amd-pstate: Optimize amd_pstate_update_limits() cpufreq: amd-pstate: Merge amd_pstate_highest_perf_set() into amd_get_boost_ratio_numerator() x86/amd: Detect preferred cores in amd_get_boost_ratio_numerator() x86/amd: Move amd_get_highest_perf() out of amd-pstate ACPI: CPPC: Adjust debug messages in amd_set_max_freq_ratio() to warn ACPI: CPPC: Drop check for non zero perf ratio x86/amd: Rename amd_get_highest_perf() to amd_get_boost_ratio_numerator() ACPI: CPPC: Adjust return code for inline functions in !CONFIG_ACPI_CPPC_LIB x86/amd: Move amd_get_highest_perf() from amd.c to cppc.c cpufreq/amd-pstate: Catch failures for amd_pstate_epp_update_limit() cpufreq: ti-cpufreq: Use socinfo to get revision in AM62 family cpufreq: Fix the cacography in powernv-cpufreq.c cpufreq: ti-cpufreq: Introduce quirks to handle syscon fails appropriately cpufreq: loongson3: Use raw_smp_processor_id() in do_service_request() cpufreq: amd-pstate: add check for cpufreq_cpu_get's return value ...
2024-09-11selftests/ring-buffer: Handle meta-page bigger than the systemVincent Donnefort
Handle the case where the meta-page content is bigger than the system page-size. This prepares the ground for extending features covered by the meta-page. Cc: Shuah Khan <skhan@linuxfoundation.org> Cc: linux-kselftest@vger.kernel.org Link: https://lore.kernel.org/20240910162335.2993310-3-vdonnefort@google.com Acked-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Vincent Donnefort <vdonnefort@google.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2024-09-11selftests/ring-buffer: Verify the entire meta-page paddingVincent Donnefort
Improve the ring-buffer meta-page test coverage by checking for the entire padding region to be 0 instead of just looking at the first 4 bytes. Cc: linux-kselftest@vger.kernel.org Link: https://lore.kernel.org/20240910162335.2993310-2-vdonnefort@google.com Acked-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Vincent Donnefort <vdonnefort@google.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2024-09-11Merge tag 'amd-pstate-v6.12-2024-09-11' of ↵Rafael J. Wysocki
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux Merge the second round of amd-pstate changes for 6.12 from Mario Limonciello: "* Move the calculation of the AMD boost numerator outside of amd-pstate, correcting acpi-cpufreq on systems with preferred cores * Harden preferred core detection to avoid potential false positives * Add extra unit test coverage for mode state machine" * tag 'amd-pstate-v6.12-2024-09-11' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux: cpufreq/amd-pstate-ut: Fix an "Uninitialized variables" issue cpufreq/amd-pstate-ut: Add test case for mode switches cpufreq/amd-pstate: Export symbols for changing modes amd-pstate: Add missing documentation for `amd_pstate_prefcore_ranking` cpufreq: amd-pstate: Add documentation for `amd_pstate_hw_prefcore` cpufreq: amd-pstate: Optimize amd_pstate_update_limits() cpufreq: amd-pstate: Merge amd_pstate_highest_perf_set() into amd_get_boost_ratio_numerator() x86/amd: Detect preferred cores in amd_get_boost_ratio_numerator() x86/amd: Move amd_get_highest_perf() out of amd-pstate ACPI: CPPC: Adjust debug messages in amd_set_max_freq_ratio() to warn ACPI: CPPC: Drop check for non zero perf ratio x86/amd: Rename amd_get_highest_perf() to amd_get_boost_ratio_numerator() ACPI: CPPC: Adjust return code for inline functions in !CONFIG_ACPI_CPPC_LIB x86/amd: Move amd_get_highest_perf() from amd.c to cppc.c
2024-09-11perf env: Find correct branch counter info on hybridKan Liang
No event is printed in the "Branch Counter" column on hybrid machines. For example, $ perf record -e "{cpu_core/branch-instructions/pp,cpu_core/branches/}:S" -j any,counter $ perf report --total-cycles # Branch counter abbr list: # cpu_core/branch-instructions/pp = A # cpu_core/branches/ = B # '-' No event occurs # '+' Event occurrences may be lost due to branch counter saturated # # Sampled Cycles% Sampled Cycles Avg Cycles% Avg Cycles Branch Counter # ............... .............. ........... .......... .............. 44.54% 727.1K 0.00% 1 |+ |+ | 36.31% 592.7K 0.00% 2 |+ |+ | 17.83% 291.1K 0.00% 1 |+ |+ | The branch counter information (br_cntr_width and br_cntr_nr) in the perf_env is retrieved from the CPU_PMU_CAPS. However, the CPU_PMU_CAPS is not available on hybrid machines. Without the width information, the number of occurrences of an event cannot be calculated. For a hybrid machine, the caps information should be retrieved from the PMU_CAPS, and stored in the perf_env->pmu_caps. Add a perf_env__find_br_cntr_info() to return the correct branch counter information from the corresponding fields. Committer notes: While testing I couldn't s ee those "Branch counter" columns enabled by pressing 'B' on the TUI, after reporting it to the list Kan explained the situation: <quote Kan Liang> For a hybrid client, the "Branch Counter" feature is only supported starting from the just released Lunar Lake. Perf falls back to only "ANY" on your Raptor Lake. The "The branch counter is not available" message is expected. Here is the 'perf evlist' result from my Lunar Lake machine, # perf evlist -v cpu_core/branch-instructions/pp: type: 4 (cpu_core), size: 136, config: 0xc4 (branch-instructions), { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|READ|PERIOD|BRANCH_STACK|IDENTIFIER, read_format: ID|GROUP|LOST, disabled: 1, freq: 1, enable_on_exec: 1, precise_ip: 2, sample_id_all: 1, exclude_guest: 1, branch_sample_type: ANY|COUNTERS # </quote> Fixes: 6f9d8d1de2c61288 ("perf script: Add branch counters") Reviewed-by: Ian Rogers <irogers@google.com> Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20240909184201.553519-1-kan.liang@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-09-11perf evlist: Print hint for groupKan Liang
An event group is a critical relationship. There is a -g option that can display the relationship. But it's hard for a user to know when should this option be applied. If there is an event group in the perf record, print a hint to suggest the user apply the -g to display the group information. With the patch, $ perf record -e "{cycles,instructions},instructions" sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.024 MB perf.data (4 samples) ] $ $ perf evlist cycles instructions instructions # Tip: use 'perf evlist -g' to show group information $ perf evlist -g {cycles,instructions} instructions $ Committer testing: So for a perf.data file _with_ a group: root@number:~# perf evlist -g {cpu_core/branch-instructions/pp,cpu_core/branches/} dummy:u root@number:~# perf evlist cpu_core/branch-instructions/pp cpu_core/branches/ dummy:u # Tip: use 'perf evlist -g' to show group information root@number:~# Then for something _without_ a group, no hint: root@number:~# perf record ls <SNIP> [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.035 MB perf.data (7 samples) ] root@number:~# perf evlist cpu_atom/cycles/P cpu_core/cycles/P dummy:u root@number:~# No suggestion, good. Suggested-by: Arnaldo Carvalho de Melo <acme@kernel.org> Reviewed-by: Ian Rogers <irogers@google.com> Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Closes: https://lore.kernel.org/lkml/ZttgvduaKsVn1r4p@x1/ Link: https://lore.kernel.org/r/20240908202847.176280-1-kan.liang@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-09-11tools: Drop nonsensical -O6Sam James
-O6 is very much not-a-thing. Really, this should've been dropped entirely in 49b3cd306e60b9d8 ("tools: Set the maximum optimization level according to the compiler being used") instead of just passing it for not-Clang. Just collapse it down to -O3, instead of "-O6 unless Clang, in which case -O3". GCC interprets > -O3 as -O3. It doesn't even interpret > -O3 as -Ofast, which is a good thing, given -Ofast has specific (non-)requirements for code built using it. So, this does nothing except look a bit daft. Remove the silliness and also save a few lines in the Makefiles accordingly. Reviewed-by: Ian Rogers <irogers@google.com> Reviewed-by: Jesper Juhl <jesperjuhl76@gmail.com> Signed-off-by: Sam James <sam@gentoo.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Bill Wendling <morbo@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Justin Stitt <justinstitt@google.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: llvm@lists.linux.dev Link: https://lore.kernel.org/r/4f01524fa4ea91c7146a41e26ceaf9dae4c127e4.1725821201.git.sam@gentoo.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-09-11Merge branch 'bpf: Allow skb dynptr for tp_btf'Martin KaFai Lau
Philo Lu says: ==================== This makes bpf_dynptr_from_skb usable for tp_btf, so that we can easily parse skb in tracepoints. This has been discussed in [0], and Martin suggested to use dynptr (instead of helpers like bpf_skb_load_bytes). For safety, skb dynptr shouldn't be used in fentry/fexit. This is achieved by add KF_TRUSTED_ARGS flag in bpf_dynptr_from_skb defination, because pointers passed by tracepoint are trusted (PTR_TRUSTED) while those of fentry/fexit are not. Another problem raises that NULL pointers could be passed to tracepoint, such as trace_tcp_send_reset, and we need to recognize them. This is done by add a "__nullable" suffix in the func_proto of the tracepoint, discussed in [1]. 2 Test cases are added, one for "__nullable" suffix, and the other for using skb dynptr in tp_btf. changelog v2 -> v3 (Andrii Nakryiko): Patch 1: - Remove prog type check in prog_arg_maybe_null() - Add bpf_put_raw_tracepoint() after get() - Use kallsyms_lookup() instead of sprintf("%ps") Patch 2: Add separate test "tp_btf_nullable", and use full failure msg v1 -> v2: - Add "__nullable" suffix support (Alexei Starovoitov) - Replace "struct __sk_buff*" with "void*" in test (Martin KaFai Lau) [0] https://lore.kernel.org/all/20240205121038.41344-1-lulie@linux.alibaba.com/T/ [1] https://lore.kernel.org/all/20240430121805.104618-1-lulie@linux.alibaba.com/T/ ==================== Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2024-09-11selftests/bpf: Expand skb dynptr selftests for tp_btfPhilo Lu
Add 3 test cases for skb dynptr used in tp_btf: - test_dynptr_skb_tp_btf: use skb dynptr in tp_btf and make sure it is read-only. - skb_invalid_ctx_fentry/skb_invalid_ctx_fexit: bpf_dynptr_from_skb should fail in fentry/fexit. In test_dynptr_skb_tp_btf, to trigger the tracepoint in kfree_skb, test_pkt_access is used for its test_run, as in kfree_skb.c. Because the test process is different from others, a new setup type is defined, i.e., SETUP_SKB_PROG_TP. The result is like: $ ./test_progs -t 'dynptr/test_dynptr_skb_tp_btf' #84/14 dynptr/test_dynptr_skb_tp_btf:OK #84 dynptr:OK #127 kfunc_dynptr_param:OK Summary: 2/1 PASSED, 0 SKIPPED, 0 FAILED $ ./test_progs -t 'dynptr/skb_invalid_ctx_f' #84/85 dynptr/skb_invalid_ctx_fentry:OK #84/86 dynptr/skb_invalid_ctx_fexit:OK #84 dynptr:OK #127 kfunc_dynptr_param:OK Summary: 2/2 PASSED, 0 SKIPPED, 0 FAILED Also fix two coding style nits (change spaces to tabs). Signed-off-by: Philo Lu <lulie@linux.alibaba.com> Link: https://lore.kernel.org/r/20240911033719.91468-6-lulie@linux.alibaba.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2024-09-11bpf: Allow bpf_dynptr_from_skb() for tp_btfPhilo Lu
Making tp_btf able to use bpf_dynptr_from_skb(), which is useful for skb parsing, especially for non-linear paged skb data. This is achieved by adding KF_TRUSTED_ARGS flag to bpf_dynptr_from_skb and registering it for TRACING progs. With KF_TRUSTED_ARGS, args from fentry/fexit are excluded, so that unsafe progs like fexit/__kfree_skb are not allowed. We also need the skb dynptr to be read-only in tp_btf. Because may_access_direct_pkt_data() returns false by default when checking bpf_dynptr_from_skb, there is no need to add BPF_PROG_TYPE_TRACING to it explicitly. Suggested-by: Martin KaFai Lau <martin.lau@linux.dev> Signed-off-by: Philo Lu <lulie@linux.alibaba.com> Acked-by: Martin KaFai Lau <martin.lau@kernel.org> Link: https://lore.kernel.org/r/20240911033719.91468-5-lulie@linux.alibaba.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2024-09-11tcp: Use skb__nullable in trace_tcp_send_resetPhilo Lu
Replace skb with skb__nullable as the argument name. The suffix tells bpf verifier through btf that the arg could be NULL and should be checked in tp_btf prog. For now, this is the only nullable argument in tcp tracepoints. Signed-off-by: Philo Lu <lulie@linux.alibaba.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/20240911033719.91468-4-lulie@linux.alibaba.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2024-09-11selftests/bpf: Add test for __nullable suffix in tp_btfPhilo Lu
Add a tracepoint with __nullable suffix in bpf_testmod, and add cases for it: $ ./test_progs -t "tp_btf_nullable" #406/1 tp_btf_nullable/handle_tp_btf_nullable_bare1:OK #406/2 tp_btf_nullable/handle_tp_btf_nullable_bare2:OK #406 tp_btf_nullable:OK Summary: 1/2 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Philo Lu <lulie@linux.alibaba.com> Link: https://lore.kernel.org/r/20240911033719.91468-3-lulie@linux.alibaba.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2024-09-11bpf: Support __nullable argument suffix for tp_btfPhilo Lu
Pointers passed to tp_btf were trusted to be valid, but some tracepoints do take NULL pointer as input, such as trace_tcp_send_reset(). Then the invalid memory access cannot be detected by verifier. This patch fix it by add a suffix "__nullable" to the unreliable argument. The suffix is shown in btf, and PTR_MAYBE_NULL will be added to nullable arguments. Then users must check the pointer before use it. A problem here is that we use "btf_trace_##call" to search func_proto. As it is a typedef, argument names as well as the suffix are not recorded. To solve this, I use bpf_raw_event_map to find "__bpf_trace##template" from "btf_trace_##call", and then we can see the suffix. Suggested-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Philo Lu <lulie@linux.alibaba.com> Link: https://lore.kernel.org/r/20240911033719.91468-2-lulie@linux.alibaba.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2024-09-11i2c: aspeed: Update the stop sw state when the bus recovery occursTommy Huang
When the i2c bus recovery occurs, driver will send i2c stop command in the scl low condition. In this case the sw state will still keep original situation. Under multi-master usage, i2c bus recovery will be called when i2c transfer timeout occurs. Update the stop command calling with aspeed_i2c_do_stop function to update master_state. Fixes: f327c686d3ba ("i2c: aspeed: added driver for Aspeed I2C") Cc: stable@vger.kernel.org # v4.13+ Signed-off-by: Tommy Huang <tommy_huang@aspeedtech.com> Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
2024-09-11cpufreq/amd-pstate-ut: Fix an "Uninitialized variables" issueQianqiang Liu
Using uninitialized value "mode2" when calling "amd_pstate_get_mode_string". Set "mode2" to "AMD_PSTATE_DISABLE" by default. Signed-off-by: Qianqiang Liu <qianqiang.liu@163.com> Link: https://lore.kernel.org/r/20240910233923.46470-1-qianqiang.liu@163.com Acked-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
2024-09-11selftests: kselftest: Use strerror() on nolibczhang jiao
Nolibc gained an implementation of strerror() recently. Use it and drop the ifndef. Signed-off-by: zhang jiao <zhangjiao2@cmss.chinamobile.com> Acked-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2024-09-11cpufreq/amd-pstate-ut: Add test case for mode switchesMario Limonciello
There is a state machine in the amd-pstate driver utilized for switches for all modes. To make sure that cleanup and setup works properly for each mode add a unit test case that tries all combinations. Reviewed-by: Perry Yuan <perry.yuan@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
2024-09-11LoongArch: KVM: Add vm migration support for LBT registersBibo Mao
Every vcpu has separate LBT registers. And there are four scr registers, one flags and ftop register for LBT extension. When VM migrates, VMM needs to get LBT registers for every vcpu. Here macro KVM_REG_LOONGARCH_LBT is added for new vcpu lbt register type, the following macro is added to get/put LBT registers. KVM_REG_LOONGARCH_LBT_SCR0 KVM_REG_LOONGARCH_LBT_SCR1 KVM_REG_LOONGARCH_LBT_SCR2 KVM_REG_LOONGARCH_LBT_SCR3 KVM_REG_LOONGARCH_LBT_EFLAGS KVM_REG_LOONGARCH_LBT_FTOP Signed-off-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-09-11LoongArch: KVM: Add Binary Translation extension supportBibo Mao
Loongson Binary Translation (LBT) is used to accelerate binary translation, which contains 4 scratch registers (scr0 to scr3), x86/ARM eflags (eflags) and x87 fpu stack pointer (ftop). Like FPU extension, here a lazy enabling method is used for LBT. the LBT context is saved/restored on the vcpu context switch path. Signed-off-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-09-11LoongArch: KVM: Add VM feature detection functionBibo Mao
Loongson SIMD Extension (LSX), Loongson Advanced SIMD Extension (LASX) and Loongson Binary Translation (LBT) features are defined in register CPUCFG2. Two kinds of LSX/LASX/LBT feature detection are added here, one is VCPU feature, and the other is VM feature. VCPU feature dection can only work with VCPU thread itself, and requires VCPU thread is created already. So LSX/LASX/LBT feature detection for VM is added also, it can be done even if VM is not created, and also can be done by any threads besides VCPU threads. Here ioctl command KVM_HAS_DEVICE_ATTR is added for VM, and macro KVM_LOONGARCH_VM_FEAT_CTRL is added to check supported feature. And five sub-features relative with LSX/LASX/LBT are added as following: KVM_LOONGARCH_VM_FEAT_LSX KVM_LOONGARCH_VM_FEAT_LASX KVM_LOONGARCH_VM_FEAT_X86BT KVM_LOONGARCH_VM_FEAT_ARMBT KVM_LOONGARCH_VM_FEAT_MIPSBT Signed-off-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-09-11LoongArch: Revert qspinlock to test-and-set simple lock on VMBibo Mao
Similar with x86, when VM is detected, revert to a simple test-and-set lock to avoid the horrors of queue preemption. Tested on 3C5000 Dual-way machine with 32 cores and 2 numa nodes, test case is kcbench on kernel mainline 6.10, the detailed command is "kcbench --src /root/src/linux" Performance on host machine kernel compile time performance impact Original 150.29 seconds With patch 150.19 seconds almost no impact Performance on virtual machine: 1. 1 VM with 32 vCPUs and 2 numa node, numa node pinned kernel compile time performance impact Original 170.87 seconds With patch 171.73 seconds almost no impact 2. 2 VMs, each VM with 32 vCPUs and 2 numa node, numa node pinned kernel compile time performance impact Original 2362.04 seconds With patch 354.73 seconds +565% Signed-off-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-09-11cpufreq/amd-pstate: Export symbols for changing modesMario Limonciello
In order to effectively test all mode switch combinations export everything necessarily for amd-pstate-ut to trigger a mode switch. Reviewed-by: Perry Yuan <Perry.Yuan@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
2024-09-11amd-pstate: Add missing documentation for `amd_pstate_prefcore_ranking`Mario Limonciello
`amd_pstate_prefcore_ranking` reflects the dynamic rankings of a CPU core based on platform conditions. Explicitly include it in the documentation. Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
2024-09-11cpufreq: amd-pstate: Add documentation for `amd_pstate_hw_prefcore`Mario Limonciello
Explain that the sysfs file represents both preferred core being enabled by the user and supported by the hardware. Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
2024-09-11cpufreq: amd-pstate: Optimize amd_pstate_update_limits()Mario Limonciello
Don't take and release the mutex when prefcore isn't present and avoid initialization of variables that will be initially set in the function. Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Reviewed-by: Perry Yuan <perry.yuan@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
2024-09-11cpufreq: amd-pstate: Merge amd_pstate_highest_perf_set() into ↵Mario Limonciello
amd_get_boost_ratio_numerator() The special case in amd_pstate_highest_perf_set() is the value used for calculating the boost numerator. Merge this into amd_get_boost_ratio_numerator() and then use that to calculate boost ratio. This allows dropping more special casing of the highest perf value. Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
2024-09-11x86/amd: Detect preferred cores in amd_get_boost_ratio_numerator()Mario Limonciello
AMD systems that support preferred cores will use "166" as their numerator for max frequency calculations instead of "255". Add a function for detecting preferred cores by looking at the highest perf value on all cores. If preferred cores are enabled return 166 and if disabled the value in the highest perf register. As the function will be called multiple times, cache the values for the boost numerator and if preferred cores will be enabled in global variables. Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
2024-09-11x86/amd: Move amd_get_highest_perf() out of amd-pstateMario Limonciello
amd_pstate_get_highest_perf() is a helper used to get the highest perf value on AMD systems. It's used in amd-pstate as part of preferred core handling, but applicable for acpi-cpufreq as well. Move it out to cppc handling code as amd_get_highest_perf(). Reviewed-by: Perry Yuan <perry.yuan@amd.com> Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
2024-09-11ACPI: CPPC: Adjust debug messages in amd_set_max_freq_ratio() to warnMario Limonciello
If the boost ratio isn't calculated properly for the system for any reason this can cause other problems that are non-obvious. Raise all messages to warn instead. Suggested-by: Perry Yuan <Perry.Yuan@amd.com> Reviewed-by: Perry Yuan <perry.yuan@amd.com> Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
2024-09-11ACPI: CPPC: Drop check for non zero perf ratioMario Limonciello
perf_ratio is a u64 and SCHED_CAPACITY_SCALE is a large number. Shifting by one will never have a zero value. Drop the check. Suggested-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Reviewed-by: Gautham R. Shenoy <gautham.sheoy@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
2024-09-11x86/amd: Rename amd_get_highest_perf() to amd_get_boost_ratio_numerator()Mario Limonciello
The function name is ambiguous because it returns an intermediate value for calculating maximum frequency rather than the CPPC 'Highest Perf' register. Rename the function to clarify its use and allow the function to return errors. Adjust the consumer in acpi-cpufreq to catch errors. Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
2024-09-11ACPI: CPPC: Adjust return code for inline functions in !CONFIG_ACPI_CPPC_LIBMario Limonciello
Checkpath emits the following warning: ``` WARNING: ENOTSUPP is not a SUSV4 error code, prefer EOPNOTSUPP ``` Adjust the code accordingly. Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
2024-09-11x86/amd: Move amd_get_highest_perf() from amd.c to cppc.cMario Limonciello
To prepare to let amd_get_highest_perf() detect preferred cores it will require CPPC functions. Move amd_get_highest_perf() to cppc.c to prepare for 'preferred core detection' rework. No functional changes intended. Reviewed-by: Perry Yuan <perry.yuan@amd.com> Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
2024-09-11ASoC: meson: axg-card: fix 'use-after-free'Arseniy Krasnov
Buffer 'card->dai_link' is reallocated in 'meson_card_reallocate_links()', so move 'pad' pointer initialization after this function when memory is already reallocated. Kasan bug report: ================================================================== BUG: KASAN: slab-use-after-free in axg_card_add_link+0x76c/0x9bc Read of size 8 at addr ffff000000e8b260 by task modprobe/356 CPU: 0 PID: 356 Comm: modprobe Tainted: G O 6.9.12-sdkernel #1 Call trace: dump_backtrace+0x94/0xec show_stack+0x18/0x24 dump_stack_lvl+0x78/0x90 print_report+0xfc/0x5c0 kasan_report+0xb8/0xfc __asan_load8+0x9c/0xb8 axg_card_add_link+0x76c/0x9bc [snd_soc_meson_axg_sound_card] meson_card_probe+0x344/0x3b8 [snd_soc_meson_card_utils] platform_probe+0x8c/0xf4 really_probe+0x110/0x39c __driver_probe_device+0xb8/0x18c driver_probe_device+0x108/0x1d8 __driver_attach+0xd0/0x25c bus_for_each_dev+0xe0/0x154 driver_attach+0x34/0x44 bus_add_driver+0x134/0x294 driver_register+0xa8/0x1e8 __platform_driver_register+0x44/0x54 axg_card_pdrv_init+0x20/0x1000 [snd_soc_meson_axg_sound_card] do_one_initcall+0xdc/0x25c do_init_module+0x10c/0x334 load_module+0x24c4/0x26cc init_module_from_file+0xd4/0x128 __arm64_sys_finit_module+0x1f4/0x41c invoke_syscall+0x60/0x188 el0_svc_common.constprop.0+0x78/0x13c do_el0_svc+0x30/0x40 el0_svc+0x38/0x78 el0t_64_sync_handler+0x100/0x12c el0t_64_sync+0x190/0x194 Fixes: 7864a79f37b5 ("ASoC: meson: add axg sound card support") Cc: Stable@vger.kernel.org Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://patch.msgid.link/20240911142425.598631-1-avkrasnov@salutedevices.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-09-11ASoC: dt-bindings: microchip,sama7g5-spdifrx: Add common DAI referenceAndrei Simion
Update the spdifrx yaml file to reference the dai-common.yaml schema, enabling the use of the 'sound-name-prefix' property Signed-off-by: Andrei Simion <andrei.simion@microchip.com> Acked-by: Rob Herring (Arm) <robh@kernel.org> Link: https://patch.msgid.link/20240910082202.45972-1-andrei.simion@microchip.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-09-11ASoC: dt-bindings: renesas,rsnd: add post-init-providers propertyKuninori Morimoto
At least if rsnd is using DPCM connection on Audio-Graph-Card2, fw_devlink might doesn't have enough information to break the cycle (Same problem might occur with Multi-CPU/Codec or Codec2Codec). In such case, rsnd driver will not be probed. Add post-init-providers support to break the link cycle. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Link: https://patch.msgid.link/87wmjkifob.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-09-11Add support for primary mi2s on SM8250Mark Brown
Merge series from Jens Reidel <adrian@travitia.xyz>: This patch adds support for the primary mi2s interface on devices using SM8250 audio drivers. Tested on SM7150 (xiaomi-davinci). SM7150 sound is close to SM8250 and we intend to use it as a fallback in the future. To: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> To: Liam Girdwood <lgirdwood@gmail.com> To: Mark Brown <broonie@kernel.org> To: Jaroslav Kysela <perex@perex.cz> To: Takashi Iwai <tiwai@suse.com> Cc: alsa-devel@alsa-project.org Cc: linux-arm-msm@vger.kernel.org Cc: linux-sound@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux@mainlining.org Jens Reidel (1): ASoC: qcom: sm8250: enable primary mi2s sound/soc/qcom/sm8250.c | 8 ++++++++ 1 file changed, 8 insertions(+) -- 2.46.0
2024-09-11drm/amd/display: Add all planes on CRTC to state for overlay cursorLeo Li
[Why] DC has a special commit path for native cursor, which use the built-in cursor pipe within DCN planes. This update path does not require all enabled planes to be added to the list of surface updates sent to DC. This is not the case for overlay cursor; it uses the same path as MPO commits. This update path requires all enabled planes to be added to the list of surface updates sent to DC. Otherwise, DC will disable planes not inside the list. [How] If overlay cursor is needed, add all planes on the same CRTC as this cursor to the atomic state. This is already done for non-cursor planes (MPO), just before the added lines. Fixes: 1b04dcca4fb1 ("drm/amd/display: Introduce overlay cursor mode") Closes: https://lore.kernel.org/lkml/f68020a3-c413-482d-beb2-5432d98a1d3e@amd.com Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Leo Li <sunpeng.li@amd.com> Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 0c8c5bdd7eaf291b6f727e98506fb68acee3a4cc)
2024-09-11regulator: core: fix the broken behavior of regulator_dev_lookup()Wei Fang
The behavior of regulator_dev_lookup() for non-DT way has been broken since the commit b8c325545714 ("regulator: Move OF-specific regulator lookup code to of_regulator.c"). Before the commit, of_get_regulator() was used to get the regulator, which returns NULL if the regulator is not found. So the regulator will be looked up through regulator_lookup_by_name() if no matching regulator is found in regulator_map_list. However, currently, of_regulator_dev_lookup() is used to instead of of_get_regulator(), but the variable 'r' is set to ERR_PTR(-ENODEV) instead of NULL if the regulator is not found. In this case, if no regulator is found in regulator_map_list, the variable 'r' is still ERR_PTR(-ENODEV), So regulator_dev_lookup() returns the value of 'r' directly instead of continuing to look up the regulator through regulator_lookup_by_name(). Fixes: b8c325545714 ("regulator: Move OF-specific regulator lookup code to of_regulator.c") Signed-off-by: Wei Fang <wei.fang@nxp.com> Link: https://patch.msgid.link/20240911120338.526384-1-wei.fang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-09-11ASoC: atmel: mchp-pdmc: Add snd_soc_dai_driver nameCodrin Ciubotariu
Set snd_soc_dai_driver name to improve controller's display of the DAI name. Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Signed-off-by: Andrei Simion <andrei.simion@microchip.com> Link: https://patch.msgid.link/20240911122909.133399-3-andrei.simion@microchip.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-09-11ASoC: atmel: mchp-pdmc: Improve maxburst calculation for better performanceCodrin Ciubotariu
Improve the DMA descriptor calculation by dividing the period size by the product of sample size and DMA chunk size, rather than just DMA chunk size. Ensure that all DMA descriptors start from a well-aligned address to improve the reliability and efficiency of DMA operations and avoid potential issues related to misaligned descriptors. [andrei.simion@microchip.com: Adjust the commit title. Reword the commit message. Add MACROS for each DMA size chunk supported by mchp-pdmc. Add DMA_BURST_ALIGNED preprocesor function to check the alignment of the DMA burst.] Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Signed-off-by: Andrei Simion <andrei.simion@microchip.com> Link: https://patch.msgid.link/20240911122909.133399-2-andrei.simion@microchip.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-09-11drm/amd/display: Add all planes on CRTC to state for overlay cursorLeo Li
[Why] DC has a special commit path for native cursor, which use the built-in cursor pipe within DCN planes. This update path does not require all enabled planes to be added to the list of surface updates sent to DC. This is not the case for overlay cursor; it uses the same path as MPO commits. This update path requires all enabled planes to be added to the list of surface updates sent to DC. Otherwise, DC will disable planes not inside the list. [How] If overlay cursor is needed, add all planes on the same CRTC as this cursor to the atomic state. This is already done for non-cursor planes (MPO), just before the added lines. Fixes: 1b04dcca4fb1 ("drm/amd/display: Introduce overlay cursor mode") Closes: https://lore.kernel.org/lkml/f68020a3-c413-482d-beb2-5432d98a1d3e@amd.com Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Leo Li <sunpeng.li@amd.com> Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-11bpf, cpumap: Move xdp:xdp_cpumap_kthread tracepoint before rcvDaniel Xu
cpumap takes RX processing out of softirq and onto a separate kthread. Since the kthread needs to be scheduled in order to run (versus softirq which does not), we can theoretically experience extra latency if the system is under load and the scheduler is being unfair to us. Moving the tracepoint to before passing the skb list up the stack allows users to more accurately measure enqueue/dequeue latency introduced by cpumap via xdp:xdp_cpumap_enqueue and xdp:xdp_cpumap_kthread tracepoints. f9419f7bd7a5 ("bpf: cpumap add tracepoints") which added the tracepoints states that the intent behind them was for general observability and for a feedback loop to see if the queues are being overwhelmed. This change does not mess with either of those use cases but rather adds a third one. Signed-off-by: Daniel Xu <dxu@dxuuu.xyz> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Jesper Dangaard Brouer <hawk@kernel.org> Link: https://lore.kernel.org/bpf/47615d5b5e302e4bd30220473779e98b492d47cd.1725585718.git.dxu@dxuuu.xyz
2024-09-11perf pmu: To info add event_type_descIan Rogers
All PMU events are assumed to be "Kernel PMU event", however, this isn't true for fake PMUs and won't be true with the addition of more software PMUs. Make the PMU's type description name configurable - largely for printing callbacks. Signed-off-by: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20240907050830.6752-5-irogers@google.com Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Sandipan Das <sandipan.das@amd.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Yang Jihong <yangjihong@bytedance.com> Cc: Dominique Martinet <asmadeus@codewreck.org> Cc: Clément Le Goffic <clement.legoffic@foss.st.com> Cc: Colin Ian King <colin.i.king@gmail.com> Cc: Howard Chu <howardchu95@gmail.com> Cc: Ze Gao <zegao2021@gmail.com> Cc: Yicong Yang <yangyicong@hisilicon.com> Cc: Changbin Du <changbin.du@huawei.com> Cc: Junhao He <hejunhao3@huawei.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Weilin Wang <weilin.wang@intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Will Deacon <will@kernel.org> Cc: James Clark <james.clark@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Jing Zhang <renyu.zj@linux.alibaba.com> Cc: Leo Yan <leo.yan@linux.dev> Cc: Oliver Upton <oliver.upton@linux.dev> Cc: Benjamin Gray <bgray@linux.ibm.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Sun Haiyong <sunhaiyong@loongson.cn> Cc: Tiezhu Yang <yangtiezhu@loongson.cn> Cc: Xu Yang <xu.yang_2@nxp.com> Cc: John Garry <john.g.garry@oracle.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Veronika Molnarova <vmolnaro@redhat.com> Cc: Dr. David Alan Gilbert <linux@treblig.org> Cc: linux-kernel@vger.kernel.org Cc: linux-perf-users@vger.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-09-11perf evsel: Add accessor for tool_eventIan Rogers
Currently tool events use a dedicated variable within the evsel. Later changes will move this to the unused struct perf_event_attr config for these events. Add an accessor to allow the later change to be well typed and avoid changing all uses. Signed-off-by: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20240907050830.6752-4-irogers@google.com Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Sandipan Das <sandipan.das@amd.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Yang Jihong <yangjihong@bytedance.com> Cc: Dominique Martinet <asmadeus@codewreck.org> Cc: Clément Le Goffic <clement.legoffic@foss.st.com> Cc: Colin Ian King <colin.i.king@gmail.com> Cc: Howard Chu <howardchu95@gmail.com> Cc: Ze Gao <zegao2021@gmail.com> Cc: Yicong Yang <yangyicong@hisilicon.com> Cc: Changbin Du <changbin.du@huawei.com> Cc: Junhao He <hejunhao3@huawei.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Weilin Wang <weilin.wang@intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Will Deacon <will@kernel.org> Cc: James Clark <james.clark@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Jing Zhang <renyu.zj@linux.alibaba.com> Cc: Leo Yan <leo.yan@linux.dev> Cc: Oliver Upton <oliver.upton@linux.dev> Cc: Benjamin Gray <bgray@linux.ibm.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Sun Haiyong <sunhaiyong@loongson.cn> Cc: Tiezhu Yang <yangtiezhu@loongson.cn> Cc: Xu Yang <xu.yang_2@nxp.com> Cc: John Garry <john.g.garry@oracle.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Veronika Molnarova <vmolnaro@redhat.com> Cc: Dr. David Alan Gilbert <linux@treblig.org> Cc: linux-kernel@vger.kernel.org Cc: linux-perf-users@vger.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-09-11perf pmus: Fake PMU clean upIan Rogers
Rather than passing a fake PMU around, just pass that the fake PMU should be used - true when doing testing. Move the fake PMU into pmus.[ch] and try to abstract the PMU's properties in pmu.c, ie so there is less "if fake_pmu" in non-PMU code. Give the fake PMU a made up type number. Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Cc: Benjamin Gray <bgray@linux.ibm.com> Cc: Changbin Du <changbin.du@huawei.com> Cc: Clément Le Goffic <clement.legoffic@foss.st.com> Cc: Colin Ian King <colin.i.king@gmail.com> Cc: Dominique Martinet <asmadeus@codewreck.org> Cc: Dr. David Alan Gilbert <linux@treblig.org> Cc: Howard Chu <howardchu95@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@linaro.org> Cc: Jing Zhang <renyu.zj@linux.alibaba.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.g.garry@oracle.com> Cc: Junhao He <hejunhao3@huawei.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linux.dev> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Oliver Upton <oliver.upton@linux.dev> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Sandipan Das <sandipan.das@amd.com> Cc: Sun Haiyong <sunhaiyong@loongson.cn> Cc: Tiezhu Yang <yangtiezhu@loongson.cn> Cc: Veronika Molnarova <vmolnaro@redhat.com> Cc: Weilin Wang <weilin.wang@intel.com> Cc: Will Deacon <will@kernel.org> Cc: Xu Yang <xu.yang_2@nxp.com> Cc: Yang Jihong <yangjihong@bytedance.com> Cc: Yicong Yang <yangyicong@hisilicon.com> Cc: Ze Gao <zegao2021@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20240907050830.6752-3-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-09-11perf list: Avoid potential out of bounds memory readIan Rogers
If a desc string is 0 length then -1 will be out of bounds, add a check. Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Cc: Benjamin Gray <bgray@linux.ibm.com> Cc: Changbin Du <changbin.du@huawei.com> Cc: Clément Le Goffic <clement.legoffic@foss.st.com> Cc: Colin Ian King <colin.i.king@gmail.com> Cc: Dominique Martinet <asmadeus@codewreck.org> Cc: Dr. David Alan Gilbert <linux@treblig.org> Cc: Howard Chu <howardchu95@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@linaro.org> Cc: Jing Zhang <renyu.zj@linux.alibaba.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.g.garry@oracle.com> Cc: Junhao He <hejunhao3@huawei.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linux.dev> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Oliver Upton <oliver.upton@linux.dev> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Sandipan Das <sandipan.das@amd.com> Cc: Sun Haiyong <sunhaiyong@loongson.cn> Cc: Tiezhu Yang <yangtiezhu@loongson.cn> Cc: Veronika Molnarova <vmolnaro@redhat.com> Cc: Weilin Wang <weilin.wang@intel.com> Cc: Will Deacon <will@kernel.org> Cc: Xu Yang <xu.yang_2@nxp.com> Cc: Yang Jihong <yangjihong@bytedance.com> Cc: Yicong Yang <yangyicong@hisilicon.com> Cc: Ze Gao <zegao2021@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20240907050830.6752-2-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-09-11perf help: Fix a typo ("bellow")Andrew Kreimer
Fix a typo in comments. Reported-by: Matthew Wilcox <willy@infradead.org> Reviewed-by: Ian Rogers <irogers@google.com> Signed-off-by: Andrew Kreimer <algonell@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: kernel-janitors@vger.kernel.org Link: https://lore.kernel.org/r/20240907131006.18510-1-algonell@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-09-11ALSA: pcm: Fix breakage of PCM rates used for topologyTakashi Iwai
It turned out that the topology ABI takes the standard PCM rate bits as is, and it means that the recent change of the PCM rate bits would lead to the inconsistent rate values used for topology. This patch reverts the original PCM rate bit definitions while adding the new rates to the extended bits instead. This needed the change of snd_pcm_known_rates, too. And this also required to fix the handling in snd_pcm_hw_limit_rates() that blindly assumed that the list is sorted while it became unsorted now. Fixes: 090624b7dc83 ("ALSA: pcm: add more sample rate definitions") Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Closes: https://lore.kernel.org/1ab3efaa-863c-4dd0-8f81-b50fd9775fad@linux.intel.com Reviewed-by: Jaroslav Kysela <perex@perex.cz> Tested-by: Jerome Brunet <jbrunet@baylibre.com> Tested-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://patch.msgid.link/20240911135756.24434-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit (git 2.34.1) at 2025-09-18 02:33:38 +0000