| Age | Commit message (Collapse) | Author |
|---|
|
On CPUs without FEAT_E2H0, HCR_EL2.E2H is RES1, but may reset to an
UNKNOWN value out of reset and consequently may not read as 1 unless it
has been explicitly initialized.
We handled this for the head.S boot code in commits:
3944382fa6f22b54 ("arm64: Treat HCR_EL2.E2H as RES1 when ID_AA64MMFR4_EL1.E2H0 is negative")
b3320142f3db9b3f ("arm64: Fix early handling of FEAT_E2H0 not being implemented")
Unfortunately, we forgot to apply a similar fix to the KVM PSCI entry
points used when relaying CPU_ON, CPU_SUSPEND, and SYSTEM SUSPEND. When
KVM is entered via these entry points, the value of HCR_EL2.E2H may be
consumed before it has been initialized (e.g. by the 'init_el2_state'
macro).
Initialize HCR_EL2.E2H early in these paths such that it can be consumed
reliably. The existing code in head.S is factored out into a new
'init_el2_hcr' macro, and this is used in the __kvm_hyp_init_cpu()
function common to all the relevant PSCI entry points.
For clarity, I've tweaked the assembly used to check whether
ID_AA64MMFR4_EL1.E2H0 is negative. The bitfield is extracted as a signed
value, and this is checked with a signed-greater-or-equal (GE) comparison.
As the hyp code will reconfigure HCR_EL2 later in ___kvm_hyp_init(), all
bits other than E2H are initialized to zero in __kvm_hyp_init_cpu().
Fixes: 3944382fa6f22b54 ("arm64: Treat HCR_EL2.E2H as RES1 when ID_AA64MMFR4_EL1.E2H0 is negative")
Fixes: b3320142f3db9b3f ("arm64: Fix early handling of FEAT_E2H0 not being implemented")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Ahmed Genidi <ahmed.genidi@arm.com>
Cc: Ben Horgan <ben.horgan@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250227180526.1204723-2-mark.rutland@arm.com
[maz: fixed LT->GE thinko]
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
snd_seq_client_use_ptr() is supposed to return the snd_seq_client
object for the given client ID, and it tries to handle the module
auto-loading when no matching object is found. Although the module
handling is performed only conditionally with "!in_interrupt()", this
condition may be fragile, e.g. when the code is called from the ALSA
timer callback where the spinlock is temporarily disabled while the
irq is disabled. Then his doesn't fit well and spews the error about
sleep from invalid context, as complained recently by syzbot.
Also, in general, handling the module-loading at each time if no
matching object is found is really an overkill. It can be still
useful when performed at the top-level ioctl or proc reads, but it
shouldn't be done at event delivery at all.
For addressing the issues above, this patch disables the module
handling in snd_seq_client_use_ptr() in normal cases like event
deliveries, but allow only in limited and safe situations.
A new function client_load_and_use_ptr() is used for the cases where
the module loading can be done safely, instead.
Reported-by: syzbot+4cb9fad083898f54c517@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/67c272e5.050a0220.dc10f.0159.GAE@google.com
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250301114530.8975-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Pull smb client fix from Steve French:
"Fix SMB1 netfs client regression"
* tag 'v6.14-rc4-smb3-client-fix' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Fix the smb1 readv callback to correctly call netfs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"Ryan's been hard at work finding and fixing mm bugs in the arm64 code,
so here's a small crop of fixes for -rc5.
The main changes are to fix our zapping of non-present PTEs for
hugetlb entries created using the contiguous bit in the page-table
rather than a block entry at the level above. Prior to these fixes, we
were pulling the contiguous bit back out of the PTE in order to
determine the size of the hugetlb page but this is clearly bogus if
the thing isn't present and consequently both the clearing of the
PTE(s) and the TLB invalidation were unreliable.
Although the problem was found by code inspection, we really don't
want this sitting around waiting to trigger and the changes are CC'd
to stable accordingly.
Note that the diffstat looks a lot worse than it really is;
huge_ptep_get_and_clear() now takes a size argument from the core code
and so all the arch implementations of that have been updated in a
pretty mechanical fashion.
- Fix a sporadic boot failure due to incorrect randomization of the
linear map on systems that support it
- Fix the zapping (both clearing the entries *and* invalidating the
TLB) of hugetlb PTEs constructed using the contiguous bit"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: hugetlb: Fix flush_hugetlb_tlb_range() invalidation level
arm64: hugetlb: Fix huge_ptep_get_and_clear() for non-present ptes
mm: hugetlb: Add huge page size param to huge_ptep_get_and_clear()
arm64/mm: Fix Boot panic on Ampere Altra
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"All driver fixes this time:
- fix interrupt initialization sequence (npcm)
- fix frequency setting (ls2x)
- re-enable interrupts properly at irq handler's exit (amd-asf)"
* tag 'i2c-for-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: amd-asf: Fix EOI register write to enable successive interrupts
i2c: ls2x: Fix frequency division register access
i2c: npcm: disable interrupt enable bit before devm_request_irq
|
|
There is a fairly obvious race between perf_init_event() doing
idr_find() and perf_pmu_register() doing idr_alloc() with an
incompletely initialized PMU pointer.
Avoid by doing idr_alloc() on a NULL pointer to register the id, and
swizzling the real struct pmu pointer at the end using idr_replace().
Also making sure to not set struct pmu members after publishing
the struct pmu, duh.
[ introduce idr_cmpxchg() in order to better handle the idr_replace()
error case -- if it were to return an unexpected pointer, it will
already have replaced the value and there is no going back. ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20241104135517.858805880@infradead.org
|
|
Commit a63fbed776c7 ("perf/tracing/cpuhotplug: Fix locking order")
placed pmus_lock inside pmus_srcu, this makes perf_pmu_unregister()
trip lockdep.
Move the locking about such that only pmu_idr and pmus (list) are
modified while holding pmus_lock. This avoids doing synchronize_srcu()
while holding pmus_lock and all is well again.
Fixes: a63fbed776c7 ("perf/tracing/cpuhotplug: Fix locking order")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20241104135517.679556858@infradead.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fixes from Niklas Cassel:
- Fix a regression where the enablement of the PHYs would be skipped
for device trees without any port child nodes (me)
- Revert ATA_QUIRK_NOLPM for Samsung SSD 870 QVO drives, as it stops
systems from entering lower package states. LPM works on newer
firmware versions. We will need a more refined quirk that only
targets the older firmware versions (me)
* tag 'ata-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
Revert "ata: libata-core: Add ATA_QUIRK_NOLPM for Samsung SSD 870 QVO drives"
ata: ahci: Make ahci_ignore_port() handle empty mask_port_map
|
|
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Fix TCR_EL2 configuration to not use the ASID in TTBR1_EL2 and not
mess-up T1SZ/PS by using the HCR_EL2.E2H==0 layout.
- Bring back the VMID allocation to the vcpu_load phase, ensuring
that we only setup VTTBR_EL2 once on VHE. This cures an ugly race
that would lead to running with an unallocated VMID.
RISC-V:
- Fix hart status check in SBI HSM extension
- Fix hart suspend_type usage in SBI HSM extension
- Fix error returned by SBI IPI and TIME extensions for unsupported
function IDs
- Fix suspend_type usage in SBI SUSP extension
- Remove unnecessary vcpu kick after injecting interrupt via IMSIC
guest file
x86:
- Fix an nVMX bug where KVM fails to detect that, after nested
VM-Exit, L1 has a pending IRQ (or NMI).
- To avoid freeing the PIC while vCPUs are still around, which would
cause a NULL pointer access with the previous patch, destroy vCPUs
before any VM-level destruction.
- Handle failures to create vhost_tasks"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
kvm: retry nx_huge_page_recovery_thread creation
vhost: return task creation error instead of NULL
KVM: nVMX: Process events on nested VM-Exit if injectable IRQ or NMI is pending
KVM: x86: Free vCPUs before freeing VM state
riscv: KVM: Remove unnecessary vcpu kick
KVM: arm64: Ensure a VMID is allocated before programming VTTBR_EL2
KVM: arm64: Fix tcr_el2 initialisation in hVHE mode
riscv: KVM: Fix SBI sleep_type use
riscv: KVM: Fix SBI TIME error generation
riscv: KVM: Fix SBI IPI error generation
riscv: KVM: Fix hart suspend_type use
riscv: KVM: Fix hart suspend status check
|
|
This reverts commit cc77e2ce187d26cc66af3577bf896d7410eb25ab.
It was reported that adding ATA_QUIRK_NOLPM for Samsung SSD 870 QVO drives
breaks entering lower package states for certain systems.
It turns out that Samsung SSD 870 QVO actually has working LPM when using
a recent SSD firmware version.
The author of commit cc77e2ce187d ("ata: libata-core: Add ATA_QUIRK_NOLPM
for Samsung SSD 870 QVO drives") reported himself that only older SSD
firmware versions have broken LPM:
https://lore.kernel.org/stable/93c10d38-718c-459d-84a5-4d87680b4da7@debian.org/
Unfortunately, he did not specify which older firmware version he was using
which had broken LPM.
Let's revert this quirk, which has FW version field specified as NULL
(which means that it applies for all Samsung SSD 870 QVO firmware versions)
for now. Once the author reports which older firmware version(s) that are
broken, we can create a more fine grained quirk, which populates the FW
version field accordingly.
Fixes: cc77e2ce187d ("ata: libata-core: Add ATA_QUIRK_NOLPM for Samsung SSD 870 QVO drives")
Reported-by: Dieter Mummenschanz <dmummenschanz@web.de>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219747
Link: https://lore.kernel.org/r/20250228122603.91814-2-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
|
A VMM may send a non-fatal signal to its threads, including vCPU tasks,
at any time, and thus may signal vCPU tasks during KVM_RUN. If a vCPU
task receives the signal while its trying to spawn the huge page recovery
vhost task, then KVM_RUN will fail due to copy_process() returning
-ERESTARTNOINTR.
Rework call_once() to mark the call complete if and only if the called
function succeeds, and plumb the function's true error code back to the
call_once() invoker. This provides userspace with the correct, non-fatal
error code so that the VMM doesn't terminate the VM on -ENOMEM, and allows
subsequent KVM_RUN a succeed by virtue of retrying creation of the NX huge
page task.
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
[implemented the kvm user side]
Signed-off-by: Keith Busch <kbusch@kernel.org>
Message-ID: <20250227230631.303431-3-kbusch@meta.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Lets callers distinguish why the vhost task creation failed. No one
currently cares why it failed, so no real runtime change from this
patch, but that will not be the case for long.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Message-ID: <20250227230631.303431-2-kbusch@meta.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
del_vqs() frees virtqueues, therefore cfv->vq_tx pointer should be checked
for NULL before calling it, not cfv->vdev. Also the current implementation
is redundant because the pointer cfv->vdev is dereferenced before it is
checked for NULL.
Fix this by checking cfv->vq_tx for NULL instead of cfv->vdev before
calling del_vqs().
Fixes: 0d2e1a2926b1 ("caif_virtio: Introduce caif over virtio")
Signed-off-by: Vitaliy Shevtsov <v.shevtsov@mt-integration.ru>
Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Link: https://patch.msgid.link/20250227184716.4715-1-v.shevtsov@mt-integration.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"These fix the processing of DT thermal properties and the Power
Allocator thermal governor:
- Fix parsing cooling-maps in DT for trip points with more than one
cooling device (Rafael Wysocki)
- Fix granted_power computation in the Power Allocator thermal
governor and make it update total_weight on configuration changes
after the thermal zone has been registered (Yu-Che Cheng)"
* tag 'thermal-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: gov_power_allocator: Update total_weight on bind and cdev updates
thermal/of: Fix cdev lookup in thermal_of_should_bind()
thermal: gov_power_allocator: Fix incorrect calculation in divvy_up_power()
|
|
Fabio Porcedda says:
====================
Add usb net support for Telit Cinterion FN990B
Add usb net support for Telit Cinterion FE990B.
Also fix Telit Cinterion FE990A name.
Connection with ModemManager was tested also AT ports.
There is a different patch set for the usb option part.
0x10b0: rmnet + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) +
tty (diag) + DPL + QDSS (Qualcomm Debug SubSystem) + adb
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 7 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1bc7 ProdID=10b0 Rev=05.15
S: Manufacturer=Telit Cinterion
S: Product=FE990
S: SerialNumber=28c2595e
C: #Ifs= 9 Cfg#= 1 Atr=e0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none)
E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none)
E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
0x10b1: MBIM + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) +
tty (diag) + DPL + QDSS (Qualcomm Debug SubSystem) + adb
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 8 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1bc7 ProdID=10b1 Rev=05.15
S: Manufacturer=Telit Cinterion
S: Product=FE990
S: SerialNumber=28c2595e
C: #Ifs=10 Cfg#= 1 Atr=e0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none)
E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 8 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none)
E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
0x10b2: RNDIS + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) +
tty (diag) + DPL + QDSS (Qualcomm Debug SubSystem) + adb
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 9 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1bc7 ProdID=10b2 Rev=05.15
S: Manufacturer=Telit Cinterion
S: Product=FE990
S: SerialNumber=28c2595e
C: #Ifs=10 Cfg#= 1 Atr=e0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=04 Prot=01 Driver=rndis_host
E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none)
E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 8 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none)
E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
0x10d3: ECM + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) +
tty (diag) + DPL + QDSS (Qualcomm Debug SubSystem) + adb
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 11 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1bc7 ProdID=10b3 Rev=05.15
S: Manufacturer=Telit Cinterion
S: Product=FE990
S: SerialNumber=28c2595e
C: #Ifs=10 Cfg#= 1 Atr=e0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether
E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl=32ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none)
E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 8 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none)
E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
====================
Link: https://patch.msgid.link/20250227112441.3653819-1-fabio.porcedda@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The correct name for FE990 is FE990A so use it in order to avoid
confusion with FE990B.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Link: https://patch.msgid.link/20250227112441.3653819-4-fabio.porcedda@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The correct name for FE990 is FE990A so use it in order to avoid
confusion with FE990B.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Link: https://patch.msgid.link/20250227112441.3653819-3-fabio.porcedda@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add the following Telit Cinterion FE990B composition:
0x10b0: rmnet + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) +
tty (diag) + DPL + QDSS (Qualcomm Debug SubSystem) + adb
usb-devices:
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 7 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1bc7 ProdID=10b0 Rev=05.15
S: Manufacturer=Telit Cinterion
S: Product=FE990
S: SerialNumber=28c2595e
C: #Ifs= 9 Cfg#= 1 Atr=e0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none)
E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none)
E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Cc: stable@vger.kernel.org
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Link: https://patch.msgid.link/20250227112441.3653819-2-fabio.porcedda@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Fix the handling of processors that stop the TSC in deeper C-states in
the intel_idle driver (Thomas Gleixner)"
* tag 'pm-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
intel_idle: Handle older CPUs, which stop the TSC in deeper C states, correctly
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
- Fix conflicts between devicetree and ACPI SMP discovery & setup
- Fix a warm-boot lockup on AMD SC1100 SoC systems
- Fix a W=1 build warning related to x86 IRQ trace event setup
- Fix a kernel-doc warning
* tag 'x86-urgent-2025-02-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/entry: Fix kernel-doc warning
x86/irq: Define trace events conditionally
x86/CPU: Fix warm boot hang regression on AMD SC1100 SoC systems
x86/of: Don't use DTB for SMP setup if ACPI is enabled
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Ingo Molnar:
"Prevent cond_resched() based preemption when interrupts are disabled,
on PREEMPT_NONE and PREEMPT_VOLUNTARY kernels"
* tag 'sched-urgent-2025-02-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/core: Prevent rescheduling when interrupts are disabled
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf event fixes from Ingo Molnar:
"Miscellaneous perf events fixes and a minor HW enablement change:
- Fix missing RCU protection in perf_iterate_ctx()
- Fix pmu_ctx_list ordering bug
- Reject the zero page in uprobes
- Fix a family of bugs related to low frequency sampling
- Add Intel Arrow Lake U CPUs to the generic Arrow Lake RAPL support
table
- Fix a lockdep-assert false positive in uretprobes"
* tag 'perf-urgent-2025-02-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
uprobes: Remove too strict lockdep_assert() condition in hprobe_expire()
perf/x86/rapl: Add support for Intel Arrow Lake U
perf/x86/intel: Use better start period for frequency mode
perf/core: Fix low freq setting via IOC_PERIOD
perf/x86: Fix low freqency setting issue
uprobes: Reject the shared zeropage in uprobe_write_opcode()
perf/core: Order the PMU list to fix warning about unordered pmu_ctx_list
perf/core: Add RCU read lock protection to perf_iterate_ctx()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Ingo Molnar:
"Fix an objtool false positive, and objtool related build warnings that
happens on PIE-enabled architectures such as LoongArch"
* tag 'objtool-urgent-2025-02-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Add bch2_trans_unlocked_or_in_restart_error() to bcachefs noreturns
objtool: Fix C jump table annotations for Clang
vmlinux.lds: Ensure that const vars with relocations are mapped R/O
|
|
In __udp_gso_segment the skb destructor is removed before segmenting the
skb but the socket reference is kept as-is. This is an issue if the
original skb is later orphaned as we can hit the following bug:
kernel BUG at ./include/linux/skbuff.h:3312! (skb_orphan)
RIP: 0010:ip_rcv_core+0x8b2/0xca0
Call Trace:
ip_rcv+0xab/0x6e0
__netif_receive_skb_one_core+0x168/0x1b0
process_backlog+0x384/0x1100
__napi_poll.constprop.0+0xa1/0x370
net_rx_action+0x925/0xe50
The above can happen following a sequence of events when using
OpenVSwitch, when an OVS_ACTION_ATTR_USERSPACE action precedes an
OVS_ACTION_ATTR_OUTPUT action:
1. OVS_ACTION_ATTR_USERSPACE is handled (in do_execute_actions): the skb
goes through queue_gso_packets and then __udp_gso_segment, where its
destructor is removed.
2. The segments' data are copied and sent to userspace.
3. OVS_ACTION_ATTR_OUTPUT is handled (in do_execute_actions) and the
same original skb is sent to its path.
4. If it later hits skb_orphan, we hit the bug.
Fix this by also removing the reference to the socket in
__udp_gso_segment.
Fixes: ad405857b174 ("udp: better wmem accounting on gso")
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Link: https://patch.msgid.link/20250226171352.258045-1-atenart@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We shouldn't be setting incompatible bits or the incompatible version
field unless explicitly request or allowed - otherwise we break mounting
with old kernels or userspace.
Reported-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fix from Ingo Molnar:
"Fix an rcuref_put() slowpath race"
* tag 'locking-urgent-2025-02-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rcuref: Plug slowpath race in rcuref_put()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix crash from bad histogram entry
An error path in the histogram creation could leave an entry in a
link list that gets freed. Then when a new entry is added it can
cause a u-a-f bug. This is fixed by restructuring the code so that
the histogram is consistent on failure and everything is cleaned up
appropriately.
- Fix fprobe self test
The fprobe self test relies on no function being attached by ftrace.
BPF programs can attach to functions via ftrace and systemd now does
so. This causes those functions to appear in the enabled_functions
list which holds all functions attached by ftrace. The selftest also
uses that file to see if functions are being connected correctly. It
counts the functions in the file, but if there's already functions in
the file, it fails. Instead, add the number of functions in the file
at the start of the test to all the calculations during the test.
- Fix potential division by zero of the function profiler stddev
The calculated divisor that calculates the standard deviation of the
function times can overflow. If the overflow happens to land on zero,
that can cause a division by zero. Check for zero from the
calculation before doing the division.
TODO: Catch when it ever overflows and report it accordingly. For
now, just prevent the system from crashing.
* tag 'trace-v6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ftrace: Avoid potential division by zero in function_stat_show()
selftests/ftrace: Let fprobe test consider already enabled functions
tracing: Fix bad hist from corrupting named_triggers list
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu fixes from Joerg Roedel:
- Intel VT-d fixes:
- Fix suspicious RCU usage splat
- Fix passthrough for devices under PCIe-PCI bridge
- AMD-Vi fix:
- Fix to preserve bits when updating device table entries
* tag 'iommu-fixes-v6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
iommu/vt-d: Fix suspicious RCU usage
iommu/vt-d: Remove device comparison in context_setup_pass_through_cb
iommu/amd: Preserve default DTE fields when updating Host Page Table Root
|
|
Eric Dumazet says:
====================
inet: ping: remove extra skb_clone()/consume_skb()
First patch in the series moves ICMP_EXT_ECHOREPLY handling in icmp_rcv()
to prepare the second patch.
The second patch removes one skb_clone()/consume_skb() pair
when processing ICMP_EXT_REPLY packets. Some people
use hundreds of "ping -fq ..." to stress hosts :)
====================
Link: https://patch.msgid.link/20250226183437.1457318-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ping_rcv() callers currently call skb_free() or consume_skb(),
forcing ping_rcv() to clone the skb.
After this patch ping_rcv() is now 'consuming' the original skb,
either moving to a socket receive queue, or dropping it.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250226183437.1457318-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is no point processing ICMP_EXT_ECHOREPLY for routes
which would drop ICMP_ECHOREPLY (RFC 1122 3.2.2.6, 3.2.2.8)
This seems an oversight of the initial implementation.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250226183437.1457318-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- mgmt: Check return of mgmt_alloc_skb
- btusb: Initialize .owner field of force_poll_sync_fops
* tag 'for-net-2025-02-27' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: Add check for mgmt_alloc_skb() in mgmt_device_connected()
Bluetooth: Add check for mgmt_alloc_skb() in mgmt_remote_name()
bluetooth: btusb: Initialize .owner field of force_poll_sync_fops
====================
Link: https://patch.msgid.link/20250227223802.3299088-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Property "supports-sd" isn't documented anywhere and is unnecessary for
mainline driver to function. It seems a property used by downstream
kernel was brought into mainline.
This should be reported by dtbs_check, but mmc-controller-common.yaml
defaults additionalProperties to true thus allows it. Remove the
property to clean the devicetree up and avoid possible confusion.
Fixes: 8d94da58de53 ("arm64: dts: rockchip: Add EmbedFire LubanCat 1")
Signed-off-by: Yao Zi <ziyao@disroot.org>
Link: https://lore.kernel.org/r/20250228163117.47318-2-ziyao@disroot.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The Intel idle driver is preferred over the ACPI processor idle driver,
but fails to implement the work around for Core2 generation CPUs, where
the TSC stops in C2 and deeper C-states. This causes stalls and boot
delays, when the clocksource watchdog does not catch the unstable TSC
before the CPU goes deep idle for the first time.
The ACPI driver marks the TSC unstable when it detects that the CPU
supports C2 or deeper and the CPU does not have a non-stop TSC.
Add the equivivalent work around to the Intel idle driver to cure that.
Fixes: 18734958e9bf ("intel_idle: Use ACPI _CST for processor models without C-state tables")
Reported-by: Fab Stz <fabstz-it@yahoo.fr>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Fab Stz <fabstz-it@yahoo.fr>
Cc: All applicable <stable@vger.kernel.org>
Closes: https://lore.kernel.org/all/10cf96aa-1276-4bd4-8966-c890377030c3@yahoo.fr
Link: https://patch.msgid.link/87bjupfy7f.ffs@tglx
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Russell King says:
====================
net: stmmac: cleanup transmit clock setting
A lot of stmmac platform code which sets the transmit clock is very
similar - they decode the speed to the clock rate (125, 25 or 2.5 MHz)
and then set a clock to that rate.
The DWMAC core appears to have a clock input for the transmit section
called clk_tx_i which requires this rate.
This series moves the code which sets this clock into the core stmmac
code.
Patch 1 adds a hook that platforms can use to configure the clock rate.
Patch 2 adds a generic implementation.
The remainder of the patches convert the glue code for various platforms
to use this new infrastructure.
====================
Link: https://patch.msgid.link/Z8AtX-wyPal1auVO@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Switch from using the fix_mac_speed() hook to set_clk_tx_rate() to
manage the transmit clock.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1tna14-0052tT-S4@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Switch from using the fix_mac_speed() hook to set_clk_tx_rate() to
manage the transmit clock.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1tna0z-0052tN-O1@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Switch from using the fix_mac_speed() hook to set_clk_tx_rate() to
manage the transmit clock.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1tna0u-0052tH-KQ@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Switch from using the fix_mac_speed() hook to set_clk_tx_rate() to
manage the transmit clock.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1tna0p-0052t8-Gn@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert non-i.MX93 users to use the generic stmmac_set_clk_tx_rate() to
configure the MAC transmit clock rate.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1tna0k-0052t2-Cc@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use the generic stmmac_set_clk_tx_rate() to configure the MAC transmit
clock.
Note that given the current unpatched driver structure,
plat_dat->fix_mac_speed will always be populated with
kmb_eth_fix_mac_speed(), even when no clock is present. We preserve
this behaviour in this patch by always initialising plat_dat->clk_tx_i
and plat_dat->set_clk_tx_rate.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1tna0f-0052sw-8r@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use the generic stmmac_set_clk_tx_rate() to configure the MAC transmit
clock.
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1tna0a-0052sq-59@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use the generic stmmac_set_clk_tx_rate() to configure the MAC transmit
clock.
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1tna0V-0052sk-1L@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use the generic stmmac_set_clk_tx_rate() to configure the MAC transmit
clock.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1tna0P-0052se-Tv@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Provide a generic implementation for the set_clk_tx_rate method
introduced by the previous patch, which is capable of configuring the
MAC transmit clock for 10M, 100M and 1000M speeds for at least MII,
GMII, RGMII and RMII interface modes.
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1tna0K-0052sY-QF@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Several stmmac sub-drivers which support RGMII follow the same pattern.
They calculate the transmit clock rate, and then call clk_set_rate().
Analysis of several implementation documents suggests that the platform
is responsible for providing the transmit clock to the DWMAC core's
clk_tx_i. The expected rates are:
10Mbps 100Mbps 1Gbps
MII 2.5MHz 25MHz
RMII 2.5MHz 25MHz
GMII 125MHz
RGMI 2.5MHz 25MHz 125MHz
It seems some platforms require this clock to be manually configured,
but there are outputs from the MAC core that indicate the speed, so a
platform may use these to automatically configure the clock. Thus, we
can't just provide one solution to configure this clock rate.
Moreover, the clock may need to be derived from one of several sources
depending on the interface mode.
Provide a platform hook that is passed the transmit clock, interface
mode and speed.
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1tna0F-0052sS-Lr@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull block fixes from Jens Axboe:
- Fix plugging for native zone writes
- Fix segment limit settings for != 4K page size archs
- Fix for slab names overflowing
* tag 'block-6.14-20250228' of git://git.kernel.dk/linux:
block: fix 'kmem_cache of name 'bio-108' already exists'
block: Remove zone write plugs when handling native zone append writes
block: make segment size limit workable for > 4K PAGE_SIZE
|
|
Snapshot the host's DEBUGCTL after disabling IRQs, as perf can toggle
debugctl bits from IRQ context, e.g. when enabling/disabling events via
smp_call_function_single(). Taking the snapshot (long) before IRQs are
disabled could result in KVM effectively clobbering DEBUGCTL due to using
a stale snapshot.
Cc: stable@vger.kernel.org
Reviewed-and-tested-by: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20250227222411.3490595-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Manually load the guest's DEBUGCTL prior to VMRUN (and restore the host's
value on #VMEXIT) if it diverges from the host's value and LBR
virtualization is disabled, as hardware only context switches DEBUGCTL if
LBR virtualization is fully enabled. Running the guest with the host's
value has likely been mildly problematic for quite some time, e.g. it will
result in undesirable behavior if BTF diverges (with the caveat that KVM
now suppresses guest BTF due to lack of support).
But the bug became fatal with the introduction of Bus Lock Trap ("Detect"
in kernel paralance) support for AMD (commit 408eb7417a92
("x86/bus_lock: Add support for AMD")), as a bus lock in the guest will
trigger an unexpected #DB.
Note, suppressing the bus lock #DB, i.e. simply resuming the guest without
injecting a #DB, is not an option. It wouldn't address the general issue
with DEBUGCTL, e.g. for things like BTF, and there are other guest-visible
side effects if BusLockTrap is left enabled.
If BusLockTrap is disabled, then DR6.BLD is reserved-to-1; any attempts to
clear it by software are ignored. But if BusLockTrap is enabled, software
can clear DR6.BLD:
Software enables bus lock trap by setting DebugCtl MSR[BLCKDB] (bit 2)
to 1. When bus lock trap is enabled, ... The processor indicates that
this #DB was caused by a bus lock by clearing DR6[BLD] (bit 11). DR6[11]
previously had been defined to be always 1.
and clearing DR6.BLD is "sticky" in that it's not set (i.e. lowered) by
other #DBs:
All other #DB exceptions leave DR6[BLD] unmodified
E.g. leaving BusLockTrap enable can confuse a legacy guest that writes '0'
to reset DR6.
Reported-by: rangemachine@gmail.com
Reported-by: whanos@sergal.fun
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219787
Closes: https://lore.kernel.org/all/bug-219787-28872@https.bugzilla.kernel.org%2F
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: stable@vger.kernel.org
Reviewed-and-tested-by: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20250227222411.3490595-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Move KVM's snapshot of DEBUGCTL to kvm_vcpu_arch and take the snapshot in
common x86, so that SVM can also use the snapshot.
Opportunistically change the field to a u64. While bits 63:32 are reserved
on AMD, not mentioned at all in Intel's SDM, and managed as an "unsigned
long" by the kernel, DEBUGCTL is an MSR and therefore a 64-bit value.
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Cc: stable@vger.kernel.org
Reviewed-and-tested-by: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20250227222411.3490595-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
