Age | Commit message (Collapse) | Author |
|
The MAX_H_TILES_PER_DISPLAY const is only used by the DPU driver, move
it to the corresponding header.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/622536/
Link: https://lore.kernel.org/r/20241031-dpu-move-topology-v1-2-8ffa8122d3b6@linaro.org
|
|
The struct msm_display_topology is only used by the DPU driver. Remove
it from the global header and move it to DPU-specific header.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/622534/
Link: https://lore.kernel.org/r/20241031-dpu-move-topology-v1-1-8ffa8122d3b6@linaro.org
|
|
There may be a potential integer overflow issue in
_dpu_core_perf_calc_clk(). crtc_clk is defined as u64, while
mode->vtotal, mode->hdisplay, and drm_mode_vrefresh(mode) are defined as
a smaller data type. The result of the calculation will be limited to
"int" in this case without correct casting. In screen with high
resolution and high refresh rate, integer overflow may happen.
So, we recommend adding an extra cast to prevent potential
integer overflow.
Fixes: c33b7c0389e1 ("drm/msm/dpu: add support for clk and bw scaling for display")
Signed-off-by: Zichen Xie <zichenxie0106@gmail.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/622206/
Link: https://lore.kernel.org/r/20241029194209.23684-1-zichenxie0106@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Follow the established symbol name pattern and rename platform data
structures.
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/622213/
Link: https://lore.kernel.org/r/20241029-msm-dp-rename-v2-3-13c5c03fad44@linaro.org
|
|
Follow the estalished prefix and rename eDP bridge symbols to use
msm_edp_ prefix, moving the edp to the end of the symbol name.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/622210/
Link: https://lore.kernel.org/r/20241029-msm-dp-rename-v2-2-13c5c03fad44@linaro.org
|
|
For historical reasons a lot of symbols in the MSM DisplayPort driver
used the generic dp_ prefix. Perform a mass-rename of those symbols to
use msm_dp prefix.
Basically this is a result of the following script:
sed drivers/gpu/drm/msm/dp/* -i -e 's/\<dp_/msm_dp_/g'
sed drivers/gpu/drm/msm/dp/* -i -e 's/"msm_dp_/"dp_/g'
sed drivers/gpu/drm/msm/dp/* -i -e 's/msm_\(dp_sdp_header\|dp_sdp\)\>/\1/g'
Yes, this also results in renaming of several struct fields in addition
to renaming the structs and functions, but I think the simple solution
is better than the more complex one.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202410250305.UHKDhtxy-lkp@intel.com/
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/622211/
Link: https://lore.kernel.org/r/20241029-msm-dp-rename-v2-1-13c5c03fad44@linaro.org
|
|
Merging to pick up commit 785324db2d7a ("drm/msm/dp: migrate the
ycbcr_420_allowed to drm_bridge").
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
Fix Panthor documentation build errors uncovered by the makedocs target
when building with extra warnings enabled.
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Fixes: 6a797bdfde77 ("drm/panthor: add sysfs knob for enabling job profiling")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241009214346.2308917-1-adrian.larumbe@collabora.com
|
|
Function drm_gem_shmem_create_with_mnt() creates an object
without using the mountpoint if gemfs is NULL.
Drop the else branch calling drm_gem_shmem_create().
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241029-v3d-v2-1-c0d3dd328d1b@gmail.com
|
|
drm_kms_helper_poll_init needs to be called after zynqmp_dpsub_kms_init.
zynqmp_dpsub_kms_init creates the connector and without it we don't
enable hotplug detection.
Fixes: eb2d64bfcc17 ("drm: xlnx: zynqmp_dpsub: Report HPD through the bridge")
Cc: stable@vger.kernel.org
Signed-off-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241028134218.54727-1-lists@steffen.cc
|
|
layer->info can be null if we have an error on the first layer in
zynqmp_disp_create_layers
Fixes: 1836fd5ed98d ("drm: xlnx: zynqmp_dpsub: Minimize usage of global flag")
Signed-off-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241028133941.54264-1-lists@steffen.cc
|
|
Add a debugfs interface for exercising the various test modes supported
by the DisplayPort controller. This allows performing compliance
testing, or performing signal integrity measurements on a failing link.
At the moment, we do not support sink-driven link quality testing,
although such support would be fairly easy to add.
Additionally, add some debugfs files for ignoring AUX errors and HPD
events, as this can allow testing with equipment that cannot emulate a
DPRX.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
[Tomi: fixed a few minor formatting issues]
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240809193600.3360015-9-sean.anderson@linux.dev
|
|
Add a non-locking version of zynqmp_dp_bridge_detect and use it in
zynqmp_dp_hpd_work_func so we can take the lock explicitly. This will
make it easier to check for hpd_ignore when we add debugfs support.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240809193600.3360015-8-sean.anderson@linux.dev
|
|
In preparation for supporting compliance testing, split off several
helper functions. No functional change intended.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240809193600.3360015-7-sean.anderson@linux.dev
|
|
Instead of polling the status register for the AUX status, just enable
the IRQs and signal a completion.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240809193600.3360015-6-sean.anderson@linux.dev
|
|
Now that all of the sleeping work is done outside of the IRQ, we can
convert it to a hard IRQ. Shared IRQs may be triggered even after
calling disable_irq, so use free_irq instead which removes our callback
altogether.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240809193600.3360015-5-sean.anderson@linux.dev
|
|
Retraining the link can take a while, and might involve waiting for
DPCD reads/writes to complete. In preparation for unthreading the IRQ
handler, move this into its own work function.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240809193600.3360015-4-sean.anderson@linux.dev
|
|
Add some locking to prevent the IRQ/workers/bridge API calls from stepping
on each other's toes. This lock protects:
- Non-atomic registers configuring the link. That is, everything but the
IRQ registers (since these are accessed in an atomic fashion), and the DP
AUX registers (since these don't affect the link). We also access AUX
while holding this lock, so it would be very tricky to support.
- Link configuration. This is effectively everything in zynqmp_dp which
isn't read-only after probe time. So from next_bridge onward.
This lock is designed to protect configuration changes so we don't have to
do anything tricky. Configuration should never be in the hot path, so I'm
not worried about performance.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240809193600.3360015-3-sean.anderson@linux.dev
|
|
Prevent userspace accesses to the DRM device from causing
use-after-frees by unplugging the device before we remove it. This
causes any further userspace accesses to result in an error without
further calls into this driver's internals.
Fixes: d76271d22694 ("drm: xlnx: DRM/KMS driver for Xilinx ZynqMP DisplayPort Subsystem")
Closes: https://lore.kernel.org/dri-devel/4d8f4c9b-2efb-4774-9a37-2f257f79b2c9@linux.dev/
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240809193600.3360015-2-sean.anderson@linux.dev
|
|
Secondary preemption buffer is accessible by NPU's DMA and can be
allocated with addresses above 4 GB. Move secondary preemption buffer
allocation from SHAVE range which is much smaller (2GB) to DMA range.
This allows to allocate more command queues with corresponding
preemption buffers without running out of address range.
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241017145817.121590-12-jacek.lawrynowicz@linux.intel.com
|
|
Increase DMA address range to:
* 128 GB on 37xx (due to MMU limitations)
* 256 GB on other generations
Merge User and DMA ranges on 40xx and above as it is possible
to access whole 256 GBs from both FW and DMA.
Increase User range on 37xx from 255MB to 511MB
to allow loading very large models.
Do not set global_alias_pio_base/size on other generations than 37xx
as it's only used on 37xx anyway.
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Signed-off-by: Andrzej Kacprowski <Andrzej.Kacprowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241017145817.121590-11-jacek.lawrynowicz@linux.intel.com
|
|
Add CONFIG_DRM_ACCEL_IVPU_DEBUG option that:
- Adds -DDEBUG that enables printk regardless of the kernel config
- Enables unsafe module params (that are now disabled by default)
Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241017145817.121590-10-jacek.lawrynowicz@linux.intel.com
|
|
Do not allocate preemption buffers when Mid Inference Preemption (MIP)
is disabled through test mode.
Rename IVPU_TEST_MODE_PREEMPTION_DISABLE to IVPU_TEST_MODE_MIP_DISABLE
to better describe that this test mode only disables MIP - job level
preemption will still occur.
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241017145817.121590-9-jacek.lawrynowicz@linux.intel.com
|
|
Use XArray for dynamic command queue ID allocations instead of fixed
ones. This is required by upcoming changes to UAPI that will allow to
manage command queues by user space instead of having predefined number
of queues in a context.
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241017145817.121590-8-jacek.lawrynowicz@linux.intel.com
|
|
Remove custom ivpu_id_alloc() wrapper used for ID allocations
and replace it with standard xa_alloc_cyclic() API.
The idea behind ivpu_id_alloc() was to have monotonic IDs, so the driver
is easier to debug because same IDs are not reused all over. The same
can be achieved just by using appropriate Linux API.
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241017145817.121590-7-jacek.lawrynowicz@linux.intel.com
|
|
Ensure that all buffers that were created only partially through
allocated scatter-gather table are unmapped from MMU600 in case of errors.
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241017145817.121590-6-jacek.lawrynowicz@linux.intel.com
|
|
Don't leave a context descriptor in case CFGI_ALL flush fails.
Mark it as invalid (by clearing valid bit) so nothing is left in
partially-initialized state.
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241017145817.121590-5-jacek.lawrynowicz@linux.intel.com
|
|
Copy engine was deprecated by the FW and is no longer supported.
Compute engine includes all copy engine functionality and should be used
instead.
This change does not affect user space as the copy engine was never
used outside of a couple of tests.
Signed-off-by: Andrzej Kacprowski <Andrzej.Kacprowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241017145817.121590-4-jacek.lawrynowicz@linux.intel.com
|
|
Defer root page table allocation and unify context init/fini functions.
Move allocation of the root page table from the file_priv_open function to
perform a lazy allocation approach during ivpu_bo_pin().
By doing so, we avoid the overhead of allocating page tables for simple
operations like GET_PARAM that do not require them.
Additionally, the MMU context descriptor table initialization has been
moved to the ivpu_mmu_context_map_page function.
This change streamlines the process and ensures that the descriptor table
is only initialized when it is actually needed.
Refactor init/fini functions to remove redundant code and make the context
management more straightforward.
Overall, these changes lead to a reduction in the time taken by the file
descriptor open operation, as the costly root page table allocation is now
avoided for operations that do not require it.
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241017145817.121590-3-jacek.lawrynowicz@linux.intel.com
|
|
Allow TILE_FUSE register to disable more than 1 tile.
The driver should not prevent such configurations from being functional.
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241017145817.121590-2-jacek.lawrynowicz@linux.intel.com
|
|
When the call to gf100_grctx_generate() fails, unlock gr->fecs.mutex
before returning the error.
Fixes smatch warning:
drivers/gpu/drm/nouveau/nvkm/engine/gr/gf100.c:480 gf100_gr_chan_new() warn: inconsistent returns '&gr->fecs.mutex'.
Fixes: ca081fff6ecc ("drm/nouveau/gr/gf100-: generate golden context during first object alloc")
Signed-off-by: Li Huafei <lihuafei1@huawei.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241026173844.2392679-1-lihuafei1@huawei.com
|
|
Add job that executes the IGT test suite for sm8350-hdk.
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241022094509.85510-3-vignesh.raman@collabora.com
|
|
Add job that executes the IGT test suite for acer-cb317-1h-c3z6-dedede.
dedede boards use 64 bit Intel Jasper Lake processors.
Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241022094509.85510-2-vignesh.raman@collabora.com
|
|
Clang-19 and above sometimes end up with multiple copies of the large
a6xx_hfi_msg_bw_table structure on the stack. The problem is that
a6xx_hfi_send_bw_table() calls a number of device specific functions to
fill the structure, but these create another copy of the structure on
the stack which gets copied to the first.
If the functions get inlined, that busts the warning limit:
drivers/gpu/drm/msm/adreno/a6xx_hfi.c:631:12: error: stack frame size (1032) exceeds limit (1024) in 'a6xx_hfi_send_bw_table' [-Werror,-Wframe-larger-than]
Fix this by kmalloc-ating struct a6xx_hfi_msg_bw_table instead of using
the stack. Also, use this opportunity to skip re-initializing this table
to optimize gpu wake up latency.
Cc: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/621814/
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
The driver configures mostly Pixel PLL from the clock cached in
local copy of the mode. Make sure the driver uses adjusted mode
which contains the updated Pixel PLL settings negotiated in
tc_dpi_atomic_check()/tc_edp_atomic_check().
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241026041057.247640-1-marex@denx.de
|
|
dispc_enable_fifomerge() last use was removed by 2012's
commit 85099f11bd03 ("Revert "OMAPDSS: APPLY: add fifo merge support
funcs"")
dispc_has_writeback(), dispc_wb_get_framedone_irq(), dispc_wb_go(),
dispc_wb_go_busy() and dispc_wb_setup() were changed from statics
to public symbols and unwired from a structure by 2020's
commit dac62bcafeaa ("drm/omap: remove dispc_ops")
but didn't have any users.
dispc_mgr_get_clock_div() got renamed from dispc_get_clock_div()
and it's last use was removed in 2011 by commit
42c9dee82129 ("OMAP: DSS2: Remove FB_OMAP_BOOTLOADER_INIT support")
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241026220010.93773-1-linux@treblig.org
|
|
There is a need to check the returned value of the registration function.
In case of returned error, print that and stop the init process.
Fixes: 7c0ffcd40b16 ("drm/msm/gpu: Respect PM QoS constraints")
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Patchwork: https://patchwork.freedesktop.org/patch/620336/
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
disable_irq() after request_irq() still has a time gap in which
interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will
disable IRQ auto-enable when request IRQ.
Fixes: 4b565ca5a2cb ("drm/msm: Add A6XX device support")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Patchwork: https://patchwork.freedesktop.org/patch/614075/
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
Fixed some spelling errors, the details are as follows:
-in the code comments:
collpase->collapse
firwmare->firmware
everwhere->everywhere
Fixes: 2401a0084614 ("drm/msm: gpu: Add support for the GPMU")
Fixes: 5a903a44a984 ("drm/msm/a6xx: Introduce GMU wrapper support")
Fixes: f97decac5f4c ("drm/msm: Support multiple ringbuffers")
Signed-off-by: Shen Lichuan <shenlichuan@vivo.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/614109/
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
Document Adreno 663 GMU in the dt-binding specification.
Signed-off-by: Puranam V G Tejaswi <quic_pvgtejas@quicinc.com>
Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/620771/
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
Add support for Adreno 663 found on sa8775p based platforms.
Signed-off-by: Puranam V G Tejaswi <quic_pvgtejas@quicinc.com>
Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/620768/
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
The ternary operator never returns -1 as `ring` will never be NULL.
Thus, the ternary operator is not needed.
Fix this by removing the ternary operation and only including the
value it will return when the `ring` is not NULL.
This was reported by Coverity Scan.
https://scan7.scan.coverity.com/#/project-view/51525/11354?selectedIssue=1600286
Fixes: 35d36dc1692f ("drm/msm/a6xx: Add traces for preemption")
Signed-off-by: Everest K.C. <everestkc@everestkc.com.np>
Patchwork: https://patchwork.freedesktop.org/patch/619349/
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
The msm_disp_state_dump_regs():
- Doesn't allocate if the caller already allocated. ...but there's one
caller and it doesn't allocate so we don't need this check.
- Checks for allocation failure over and over even though it could
just do it once right after the allocation.
Clean this up.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/619660/
Link: https://lore.kernel.org/r/20241014093605.3.I66049c2c17bd82767661f0ecd741b20453da02b2@changeid
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
The Sahara protocol has a crashdump functionality. In the hello
exchange, the device can advertise it has a memory dump available for
the host to collect. Instead of the device making requests of the host,
the host requests data from the device which can be later analyzed.
Implement this functionality and utilize the devcoredump framework for
handing the dump over to userspace.
Similar to how firmware loading in Sahara involves multiple files,
crashdump can consist of multiple files for different parts of the dump.
Structure these into a single buffer that userspace can parse and
extract the original files from.
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241021200355.544126-1-quic_jhugo@quicinc.com
|
|
drm_sched_job_init()'s name suggests that after the function succeeded,
parameter "job" will be fully initialized. This is not the case; some
members are only later set, notably drm_sched_job.sched by
drm_sched_job_arm().
Document that drm_sched_job_init() does not set all struct members.
Document the lifetime of drm_sched_job.sched.
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241023141530.113370-2-pstanner@redhat.com
|
|
The id_mask field of struct panfrost_model has never been used.
Fixes: f3ba91228e8e ("drm/panfrost: Add initial panfrost driver")
Signed-off-by: Steven Price <steven.price@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241025140008.385081-1-steven.price@arm.com
|
|
Allow meson to be built with COMPILE_TEST=y for greater
coverage. Builds fine on x86/x86_64 at least.
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: linux-amlogic@lists.infradead.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241003111851.10453-11-ville.syrjala@linux.intel.com
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
Allow mediatek to be built with COMPILE_TEST=y for greater
coverage. Builds fine on x86/x86_64 at least.
Cc: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: linux-mediatek@lists.infradead.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241003111851.10453-10-ville.syrjala@linux.intel.com
Reviewed-by: CK Hu <ck.hu@mediatek.com>
|
|
Allow imx/dcss to be built with COMPILE_TEST=y for greater
coverage. Builds fine on x86/x86_64 at least.
Cc: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241003111851.10453-8-ville.syrjala@linux.intel.com
Reviewed-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
|
|
Use the appropriate 64bit division helpers to make the code
build on 32bit architectures.
Cc: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241003111851.10453-7-ville.syrjala@linux.intel.com
Reviewed-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
|