| Age | Commit message (Collapse) | Author |
|---|
|
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap into soc/dt
ARM: dts: ti/omap/dra7: minor updates for v6.14
* tag 'omap-for-v6.14/dt-signed' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap:
ARM: dts: ti/omap: omap3-gta04: use proper touchscreen properties
ARM: dts: ti: am437x-l4: remove autoidle for UART
ARM: dts: ti/omap: gta04: fix pm issues caused by spi module
ARM: dts: dra7: Add bus_dma_limit for l4 cfg bus
Link: https://lore.kernel.org/r/7hmsg2b42q.fsf@baylibre.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/dt
Microchip AT91 device tree updates for v6.14
This update includes:
- power monitor support for the SAM9X75 Curiosity board (using the PAC1934
device)
- fix the VDDSDMMC rail to 3.3V to avoid breaking USB (for SAMA5D27 WLSOM1
EK and SAMA5D29 Curiosity boards)
- partial support for the SAMA7D65 SoC
- cleanups
* tag 'at91-dt-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: microchip: sam9x7: Add address/size to spi-controller nodes
ARM: dts: microchip: sam9x60: Add address/size to spi-controller nodes
ARM: dts: microchip: sama5d27_wlsom1_ek: Add no-1-8-v property to sdmmc0 node
ARM: dts: microchip: sama5d29_curiosity: Add no-1-8-v property to sdmmc0 node
ARM: dts: at91: Add sama7d65 pinmux
dt-bindings: atmel-sysreg: add sama7d65 RAM and PIT
dt-bindings: ARM: at91: Document Microchip SAMA7D65 Curiosity
ARM: dts: microchip: sam9x75_curiosity: Add power monitor support
ARM: dts: microchip: sam9x7: Move i2c address/size to dtsi
Link: https://lore.kernel.org/r/20250107081424.758980-2-claudiu.beznea@tuxon.dev
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.14 (take two)
- Add pin control support for the RZ/G3E SoC and the RZ/G3E SMARC
Carrier-II EVK development board,
- Add Image Signal Processor helper block (FCPVX and VSPX) support for
the R-Car V4H SoC,
- Describe odd C-PHY wiring on the White Hawk CSI/DSI sub-board,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.14-tag2' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: white-hawk-csi-dsi: Define CSI-2 data line orders
arm64: dts: renesas: r8a779g0: Add VSPX instances
arm64: dts: renesas: r8a779g0: Add FCPVX instances
arm64: dts: renesas: r9a09g047e57-smarc: Add SCIF pincontrol
arm64: dts: renesas: r9a09g047: Add pincontrol node
arm64: dts: renesas: r9a09g057h44-rzv2h-evk: Replace RZG2L macros
dt-bindings: pinctrl: renesas: Document RZ/G3E SoC
dt-bindings: pinctrl: renesas: Add alpha-numerical port support for RZ/V2H
Link: https://lore.kernel.org/r/cover.1736180859.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/dt
Amlogic ARM64 DT changes for v6.13:
- remove broadcom wifi compatible from GX reference boards
* tag 'amlogic-arm64-dt-for-v6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
arm64: dts: meson: remove broadcom wifi compatible from GX reference boards
Link: https://lore.kernel.org/r/72d71d3f-99c3-4767-8c80-8fa7a865c846@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/dt
Amlogic ARM DT changes for v6.14:
- remove size and address cells from USB nodes
* tag 'amlogic-arm-dt-for-v6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
ARM: dts: amlogic: meson: remove size and address cells from USB nodes
Link: https://lore.kernel.org/r/77c645b3-0cdf-49f4-84e9-11c74074b9a8@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti into soc/dt
Add and enable MALI400 support for STiH410-b2260
* tag 'sti-dt-for-v6.14-round1' of https://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti:
ARM: dts: st: enable the MALI gpu on the stih410-b2260
ARM: dts: st: add node for the MALI gpu on stih410.dtsi
dt-bindings: gpu: mali-utgard: Add st,stih410-mali compatible
Link: https://lore.kernel.org/r/f44cb1f0-4d91-4e25-8b1f-3dd9a7bed62b@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX arm64 device tree change for 6.14:
- Add simple-framebuffer support for imx8mn-bsh-smm-s2/pro board
(Dario Binacchi)
- Add LVDS compatible string for imx8mm-phg board (Fabio Estevam)
- Add P3T1085 temperature sensor support for imx93-9x9-qsb board (Frank Li)
- Add support for i.MX8MP based aristainetos3 boards from ABB
(Heiko Schocher)
- Add PCA9452 system PMIC support for imx93-14x14-evk board (Joy Zou)
- Support NXP LVDS to HDMI adapter cards for imx8mp-evk board with DT
overlays (Liu Ying)
- A couple of changes from Markus Niebel to enable Open Drain for MDIO
on imx93-tqma9352 boards
- A series from Peng Fan to enable wdog3 fsl,ext-reset-output support
for NXP i.MX93 boards
- A couple changes from Wei Fang to add NETC support for i.MX95
* tag 'imx-dt64-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: freescale: imx93-9x9-qsb: enable fsl,ext-reset-output for wdog3
arm64: dts: freescale: imx93-14x14-evk: enable fsl,ext-reset-output for wdog3
arm64: dts: freescale: imx93-11x11-evk: enable fsl,ext-reset-output for wdog3
arm64: dts: imx95-19x19-evk: add ENETC 0 support
arm64: dts: imx95: add NETC related nodes
arm64: dts: imx8mm-phg: Add LVDS compatible string
arm64: dts: imx93: add pca9452 support
arm64: dts: imx8mn-bsh-smm-s2/pro: add simple-framebuffer
arm64: dts: imx93-tqma9352-mba93xxla: enable Open Drain for MDIO
arm64: dts: imx93-tqma9352-mba93xxca: enable Open Drain for MDIO
arm64: dts: imx93-9x9-qsb: add temp-sensor nxp,p3t1085
arm64: dts: imx8mp-evk: Add NXP LVDS to HDMI adapter cards
arm64: dts: imx8mp-skov-revb-mi1010ait-1cp1: Set "media_disp2_pix" clock rate to 70MHz
arm64: dts: imx8mp: add aristainetos3 board support
arm64: dts: imx8mq-zii-ultra: remove #address-cells of eeprom@a4
arm64: dts: imx: Switch to simple-audio-card,hp-det-gpios
Link: https://lore.kernel.org/r/20250105095139.714590-4-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX ARM device tree change for 6.14:
- Clean up TQMa7x device trees (Alexander Stein)
- Correct node name pattern for mdio-gpio devices (Fabio Estevam)
- Update deprecated GPIO properties for Generic ASoC Sound Card device
(Geert Uytterhoeven)
- Set USB dr_mode property to OTG explicitly for imx6qdl-sabresd based
boards (Hui Wang)
- Update MAINTAINERS entry for DH electronics DHSOM boards (Marek Vasut)
- A series from Stefan Kerkmann to add phy-3p0-supply for usb phys
* tag 'imx-dt-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: imx: Use the correct mdio pattern
ARM: dts: imx6qdl-sabresd: add dr_mode to usbotg
ARM: dts: imx6qdl-apalis: Change to "adi,force-bt656-4"
ARM: dts: imx6sx: add phy-3p0-supply to usb phys
ARM: dts: imx6sl: add phy-3p0-supply to usb phys
ARM: dts: imx6qdl: add phy-3p0-supply to usb phys
MAINTAINERS: Update entry for DH electronics DHSOM SoMs and boards
ARM: dts: imx7[d]-mba7: add Ethernet PHY IRQ support
ARM: dts: imx7-mba7: Remove duplicated power supply
ARM: dts: imx7-mba7: Fix SD card vmmc-supply
ARM: dts: imx7-mba7: Add 3.3V and 5.0V regulators
ARM: dts: imx7-tqma7: add missing vs-supply for LM75A (rev. 01xxx)
ARM: dts: imx7-tqma7: Remove superfluous status="okay" property
ARM: dts: imx7-mba7: remove LVDS transmitter regulator
ARM: dts: imx: Switch to {hp,mic}-det-gpios
Link: https://lore.kernel.org/r/20250105095139.714590-3-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX dt-bindings change for 6.14:
- Add compatibles for i.MX8MP based SoM and carrier from ABB
* tag 'imx-bindings-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
dt-bindings: arm: fsl: Add ABB SoM and carrier
Link: https://lore.kernel.org/r/20250105095139.714590-2-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into soc/dt
SoCFPGA DTS updates for v6.14
- Remove unused and undocumented property "snps,max-mtu"
- Add gpio and spi node for Agilex5
- Add VGIC maintenance interrupt for Agilex
- Use correct reset name of "stmmaceth-ocp" instead of "ahb"
- Drop unused #address-cells/#size-cells in the cyclone5-mcvevk
* tag 'socfpga_dts_updates_v6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
arm64: dts: altera: Remove unused and undocumented "snps,max-mtu" property
arm64: dts: socfpga: agilex5: Add gpio0 node and spi dma handshake id
arm64: dts: socfpga: agilex: Add VGIC maintenance interrupt
arm: dts: socfpga: use reset-name "stmmaceth-ocp" instead of "ahb"
ARM: dts: socfpga_cyclone5_mcvevk: Drop unused #address-cells/#size-cells
Link: https://lore.kernel.org/r/20250103023012.1268627-1-dinguyen@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://github.com/hisilicon/linux-hisi into soc/dt
ARM64: DT: HiSilicon ARM64 DT updates for v6.14
- Remove "enable-dma" and "bus-id" properties from the spi node on hi6220
* tag 'hisi-arm64-dt-for-6.14' of https://github.com/hisilicon/linux-hisi:
arm64: dts: hisilicon: Remove unused and undocumented "enable-dma" and "bus-id" properties
Link: https://lore.kernel.org/r/67767DCA.8060902@hisilicon.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into soc/dt
Minor improvements in ARM DTS for v6.14
1. Marvell: Use un-deprecated hp-det-gpios (no ABI impact expected).
2. SoCFPGA: Drop spidev devices which are not properly described in DTS,
but are using some other compatibles. This was part of wider tree
effort to fix such incorrect hardware descriptions.
Important: Dropping this device node will have user-visible impact:
spidev device will not register.
* tag 'dt-cleanup-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt:
ARM: dts: socfpga: remove non-existent DAC from CycloneV devkit
ARM: dts: marvell: mmp2-olpc-xo-1-75: Switch to {hp,mic}-det-gpios
Link: https://lore.kernel.org/r/20241231132847.135814-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into soc/dt
Minor improvements in ARM64 DTS for v6.14
1. Spreadtrum:
- Correct few issues pointed out by DT schema around properties and
node names.
- Move fuel-gauge from DTSI to DTS, because it belongs to the board.
- Use undeprecated properties, like battery-detect-gpios, already
supported by Linux.
2. Uniphier: Use un-deprecated hp-det-gpios (no ABI impact expected).
* tag 'dt64-cleanup-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt:
arm64: dts: sprd: Fix battery-detect-gpios property
arm64: dts: uniphier: Switch to hp-det-gpios
arm64: dts: sprd: sc9863a: reorder clocks, clock-names per bindings
arm64: dts: sprd: sc9863a: fix in-ports property
arm64: dts: sprd: sc2731: move fuel-gauge monitored-battery to device DTS
arm64: dts: sprd: sp9860g-1h10: fix factory-internal-resistance-micro-ohms property
arm64: dts: sprd: sp9860g-1h10: fix constant-charge-voltage-max-microvolt property
Link: https://lore.kernel.org/r/20241231132847.135814-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM64 changes for v6.14
1. Exynos8895: Add UART nodes, PMU (performance) for the M2 cluster and
I2C controllers in the camera block (HSI2C in CAM0-3).
2. Exynos990: Add Power Management Unit (Samsung block), PMU
(performance) for M5 cluster and two clock controllers.
3. ExynosAutov920: Add watchdog and DMA controllers.
4. Google GS101: Minor fixes for phy and USB. Add USB Type-C.
5. Exynos850-e850-96 board: Drop gap in memory layout.
6. New SoC: Exynos9810.
7. New boards, all mobile phones:
- Exynos9810:
Samsung Galaxy S9 (SM-G960F)
- Exynos990:
Samsung Galaxy S20 FE (SM-G780F)
Samsung Galaxy S20 5G (SM-G980F)
* tag 'samsung-dt64-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (23 commits)
arm64: dts: exynos8895: Add camera hsi2c nodes
arm64: dts: exynos990: Add clock management unit nodes
arm64: dts: exynos: gs101-oriole: add pd-disable and typec-power-opmode
arm64: dts: exynos: gs101-oriole: enable Maxim max77759 TCPCi
arm64: dts: exynos: Add initial support for Samsung Galaxy S9 (SM-G960F)
arm64: dts: exynos: Add Exynos9810 SoC support
arm64: dts: exynos850-e850-96: Specify reserved secure memory explicitly
arm64: dts: exynos990: Add a PMU node for the third cluster
arm64: dts: exynosautov920: Add DMA nodes
arm64: dts: exynos8895: Add a PMU node for the second cluster
dt-bindings: clock: samsung: Add Exynos990 SoC CMU bindings
arm64: dts: exynosautov920: add watchdog DT node
arm64: dts: exynos: Add initial support for Samsung Galaxy S20 (x1slte)
arm64: dts: exynos: Add initial support for Samsung Galaxy S20 5G (x1s)
arm64: dts: exynos: Add initial support for Samsung Galaxy S20 Series boards (x1s-common)
dt-bindings: arm: samsung: samsung-boards: Add bindings for SM-G981B and SM-G980F board
arm64: dts: exynos: gs101: allow stable USB phy Vbus detection
arm64: dts: exynos: gs101: phy region for exynos5-usbdrd is larger
MAINTAINERS: add myself and Tudor as reviewers for Google Tensor SoC
arm64: dts: exynos990: Add pmu and syscon-reboot nodes
...
Link: https://lore.kernel.org/r/20241231131742.134329-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
thead-dt-for-v6.14: T-HEAD Devicetrees for v6.14
Add mailbox node for the T-Head TH1520 RISC-V SoC. The mailbox bindings
and driver were already merged in v6.13:
b2cf36e4a2ac ("dt-bindings: mailbox: Add thead,th1520-mailbox bindings")
5d4d263e1c6b ("mailbox: Introduce support for T-head TH1520 Mailbox driver")
Signed-off-by: Drew Fustini <drew@pdp7.com>
* tag 'thead-dt-for-v6.14' of https://github.com/pdp7/linux:
riscv: dts: thead: Add mailbox node
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM changes for v6.14
Few fixes and improvements for sound on Galaxy Tab3 (Exynos4212).
* tag 'samsung-dt-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: samsung: exynos4212-tab3: Drop interrupt from WM1811 codec
ARM: dts: samsung: exynos4212-tab3: Add MCLK2 clock to WM1811 codec config
ARM: dts: samsung: exynos4212-tab3: Fix headset mic, add jack detection
Link: https://lore.kernel.org/r/20241231131742.134329-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Specify the dimensions of the touchscreen propertly so that
no userspace configuration is needed for it.
Tested with x11 and weston on Debian bookworm.
What is in now is some debris from earlier tries to handle
scaling in kernel:
https://lore.kernel.org/linux-input/cover.1482936802.git.hns@goldelico.com/
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://lore.kernel.org/r/20241205204413.2466775-3-akemnade@kernel.org
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
According to the TRM [0] in 21.5.1.42 UART_SYSC Register,
the autoidle bit should not be set for UART, so remove the
appropriate SYSC_OMAP2_AUTOIDLE flag.
[0] https://www.ti.com/lit/ug/spruhl7i/spruhl7i.pdf
Signed-off-by: Judith Mendez <jm@ti.com>
Reviewed-by: Sukrut Bellary <sbellary@baylibre.com>
Link: https://lore.kernel.org/r/20241220223523.2125278-1-jm@ti.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
Despite CM_IDLEST1_CORE and CM_FCLKEN1_CORE behaving normal,
disabling SPI leads to messages like when suspending:
Powerdomain (core_pwrdm) didn't enter target state 0
and according to /sys/kernel/debug/pm_debug/count off state is not
entered. That was not connected to SPI during the discussion
of disabling SPI. See:
https://lore.kernel.org/linux-omap/20230122100852.32ae082c@aktux/
The reason is that SPI is per default in slave mode. Linux driver
will turn it to master per default. It slave mode, the powerdomain seems to
be kept active if active chip select input is sensed.
Fix that by explicitly disabling the SPI3 pins which used to be muxed by
the bootloader since they are available on an optionally fitted header
which would require dtb overlays anyways.
Fixes: a622310f7f01 ("ARM: dts: gta04: fix excess dma channel usage")
CC: stable@vger.kernel.org
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20241204174152.2360431-1-andreas@kemnade.info
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
The second CSI-2 C-PHY data-lanes have different line orders (BCA) than
the two other data-lanes (ABC) for both connected CSI-2 receivers,
describe this in the device tree.
This has worked in the past as the R-Car CSI-2 driver did not have
documentation for the line order configuration, hence magic values were
written to the registers for this specific setup. Now the registers
involved are documented, the hardware description as well as the driver
needs to be updated.
Note that the numerical values will be replaced by symbolic values
later.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250106104458.3596109-1-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add device nodes for the VSPX instances on R-Car V4H (R8A779G0) SoC.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Link: https://lore.kernel.org/20241220-rcar-v4h-vspx-v4-4-7dc1812585ad@ideasonboard.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add device nodes for the FCPVX instances on R-Car V4H (R8A779G0) SoC.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Link: https://lore.kernel.org/20241220-rcar-v4h-vspx-v4-2-7dc1812585ad@ideasonboard.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add device node for SCIF pincontrol.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/20241216195325.164212-8-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Enable the GPU on the stih410-b2260 board.
Signed-off-by: Alain Volmat <avolmat@me.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
|
|
Add the entry for the GPU (Mali400) on the stih410.dtsi
Signed-off-by: Alain Volmat <avolmat@me.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
|
|
ST STiH410 SoC has a Mali400. Add a compatible for it.
Signed-off-by: Alain Volmat <avolmat@me.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
|
|
Renesas RZ/G3E Pin Control DT Binding Definitions
Pin control DT bindings and binding definitions for the Renesas RZ/G3E
(R9A09G047) SoC, shared by driver and DT source files.
|
|
Add pincontrol node to RZ/G3E ("R9A09G047") SoC DTSI.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/20241216195325.164212-7-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Replace RZG2L_* macros with RZV2H_* macros, so that we can define
port names in alpha-numeric.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/20241216195325.164212-6-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Renesas RZ/V2H Pin Control DT Binding Definitions
Pin control DT binding definitions for the Renesas RZ/V2H (R9A09G057)
SoC, shared by driver and DT source files.
|
|
Add documentation for the pin controller found on the Renesas RZ/G3E
(R9A09G047) SoC. The RZ/G3E PFC is similar to the RZ/V2H SoC but has more
pins(P00-PS3).
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20241216195325.164212-3-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
RZ/V2H has ports P0-P9 and PA-PB. Add support for defining alpha-numerical
ports in DT using RZV2H_* macros.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20241216195325.164212-2-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Since these properties are common for all spi subnodes,
add them to SoC dtsi instead of board dts.
Signed-off-by: Mihai Sain <mihai.sain@microchip.com>
Link: https://lore.kernel.org/r/20241218080333.2225-3-mihai.sain@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
Since these properties are common for all spi subnodes,
add them to SoC dtsi instead of board dts.
Signed-off-by: Mihai Sain <mihai.sain@microchip.com>
Link: https://lore.kernel.org/r/20241218080333.2225-2-mihai.sain@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
Add no-1-8-v property to sdmmc0 node to keep VDDSDMMC power rail at 3.3V.
This property will stop the LDO regulator from switching to 1.8V when the
MMC core detects an UHS SD Card. VDDSDMMC power rail is used by all the
SDMMC interface pins in GPIO mode (PA0 - PA13).
On this board, PA10 is used as GPIO to enable the power switch controlling
USB Vbus for the USB Host. The change is needed to fix the PA10 voltage
level to 3.3V instead of 1.8V.
Fixes: 5d4c3cfb63fe ("ARM: dts: at91: sama5d27_wlsom1: add SAMA5D27 wlsom1 and wlsom1-ek")
Suggested-by: Mihai Sain <mihai.sain@microchip.com>
Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com>
Tested-by: Andrei Simion <andrei.simion@microchip.com>
Link: https://lore.kernel.org/r/20241119160107.598411-3-cristian.birsan@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
Add no-1-8-v property to sdmmc0 node to keep VDDSDMMC power rail at 3.3V.
This property will stop the LDO regulator from switching to 1.8V when the
MMC core detects an UHS SD Card. VDDSDMMC power rail is used by all the
SDMMC interface pins in GPIO mode (PA0 - PA13).
On this board, PA6 is used as GPIO to enable the power switch controlling
USB Vbus for the USB Host. The change is needed to fix the PA6 voltage
level to 3.3V instead of 1.8V.
Fixes: d85c4229e925 ("ARM: dts: at91: sama5d29_curiosity: Add device tree for sama5d29_curiosity board")
Suggested-by: Mihai Sain <mihai.sain@microchip.com>
Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com>
Tested-by: Andrei Simion <andrei.simion@microchip.com>
Link: https://lore.kernel.org/r/20241119160107.598411-2-cristian.birsan@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
Add sama7d65 pin descriptions.
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Link: https://lore.kernel.org/r/a8f880b89cd4470526a2955a0b6aaaaa24ba65b8.1733505542.git.Ryan.Wanner@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
The only board that actually requires these properties is
meson8b-odroidc1.dts but that already sets it on it's own. Drop these
properties from meson.dtsi because otherwise they can cause dtc
warnings:
/soc/usb@c9040000: unnecessary #address-cells/#size-cells without
"ranges", "dma-ranges" or child "reg" property
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20241226220352.965505-1-martin.blumenstingl@googlemail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
The WDOG_B is connected to external PMIC, so set "fsl,ext-reset-output"
to enable triggering PMIC reset.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The WDOG_B is connected to external PMIC, so set "fsl,ext-reset-output"
to enable triggering PMIC reset.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The WDOG_B is connected to external PMIC, so set "fsl,ext-reset-output"
to enable triggering PMIC reset.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add ENETC 0 (1G ethernet port) support for i.MX95-19x19-EVK board. In
addition, because all ENETC instances share MDIO bus, so enable EMDIO
at the same time.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add NETC related nodes for i.MX95.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
mdio-gpio is not a valid pattern according to mdio-gpio.yaml.
Use the generic 'mdio' name to fix the following dt-schema warnings:
'mdio-gpio' does not match '^mdio(-(bus|external))?(@.+|-([0-9]+))?$'
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Currently there are 3 type of boards (imx6q|imx6qp|imx6dl-sabresd)
based on imx6qdl-sabresd.dtsi, they all do not set the dr_mode for
usbotg device node. The chipidea usb driver will configure it to otg
mode by default if the dr_mode is not set, but some testcases need to
parse the dr_mode from DT and decide the follow-up test strategy, here
set the dr_mode to otg explicitly for these 3 imx6qdl-sabresd based
boards.
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The imx8mm-phg board has an AUO G084SN05 V9 8.4" 800x600 LVDS panel.
Improve the devicetree description by passing the LVDS compatible
string to fix the following dt-schema warning:
imx8mm-phg.dtb: panel: compatible:0: 'panel-lvds' is not one of
['admatec,9904379', 'auo,b101ew05', 'auo,g084sn05',
'chunghwa,claa070wp03xg','edt,etml0700z9ndha', 'hannstar,hsd101pww2',
'hydis,hv070wx2-1e0', 'jenson,bl-jt60050-01a', 'tbs,a711-panel']
...
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add nodes for hsi2c1-4 (CAM0-3), which allows using them.
Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
Link: https://lore.kernel.org/r/20241221152803.1663820-1-ivo.ivanov.ivanov1@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Add CMU nodes for:
- cmu_top: provides clocks for other blocks
- cmu_hsi0: provides clocks for usb31
Signed-off-by: Igor Belwon <igor.belwon@mentallysanemainliners.org>
Link: https://lore.kernel.org/r/20241224-cmu-v3-1-33ca24b2413c@mentallysanemainliners.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
|
|
Support pca9452 on imx93-14x14-evk.
Signed-off-by: Joy Zou <joy.zou@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
