summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-01-13Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm fixes from Paolo Bonzini: "ARM: - Fix the PMCR_EL0 reset value after the PMU rework - Correctly handle S2 fault triggered by a S1 page table walk by not always classifying it as a write, as this breaks on R/O memslots - Document why we cannot exit with KVM_EXIT_MMIO when taking a write fault from a S1 PTW on a R/O memslot - Put the Apple M2 on the naughty list for not being able to correctly implement the vgic SEIS feature, just like the M1 before it - Reviewer updates: Alex is stepping down, replaced by Zenghui x86: - Fix various rare locking issues in Xen emulation and teach lockdep to detect them - Documentation improvements - Do not return host topology information from KVM_GET_SUPPORTED_CPUID" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86/xen: Avoid deadlock by adding kvm->arch.xen.xen_lock leaf node lock KVM: Ensure lockdep knows about kvm->lock vs. vcpu->mutex ordering rule KVM: x86/xen: Fix potential deadlock in kvm_xen_update_runstate_guest() KVM: x86/xen: Fix lockdep warning on "recursive" gpc locking Documentation: kvm: fix SRCU locking order docs KVM: x86: Do not return host topology information from KVM_GET_SUPPORTED_CPUID KVM: nSVM: clarify recalc_intercepts() wrt CR8 MAINTAINERS: Remove myself as a KVM/arm64 reviewer MAINTAINERS: Add Zenghui Yu as a KVM/arm64 reviewer KVM: arm64: vgic: Add Apple M2 cpus to the list of broken SEIS implementations KVM: arm64: Convert FSC_* over to ESR_ELx_FSC_* KVM: arm64: Document the behaviour of S1PTW faults on RO memslots KVM: arm64: Fix S1PTW handling on RO memslots KVM: arm64: PMU: Fix PMCR_EL0 reset value
2023-01-13lockref: stop doing cpu_relax in the cmpxchg loopMateusz Guzik
On the x86-64 architecture even a failing cmpxchg grants exclusive access to the cacheline, making it preferable to retry the failed op immediately instead of stalling with the pause instruction. To illustrate the impact, below are benchmark results obtained by running various will-it-scale tests on top of the 6.2-rc3 kernel and Cascade Lake (2 sockets * 24 cores * 2 threads) CPU. All results in ops/s. Note there is some variance in re-runs, but the code is consistently faster when contention is present. open3 ("Same file open/close"): proc stock no-pause 1 805603 814942 (+%1) 2 1054980 1054781 (-0%) 8 1544802 1822858 (+18%) 24 1191064 2199665 (+84%) 48 851582 1469860 (+72%) 96 609481 1427170 (+134%) fstat2 ("Same file fstat"): proc stock no-pause 1 3013872 3047636 (+1%) 2 4284687 4400421 (+2%) 8 3257721 5530156 (+69%) 24 2239819 5466127 (+144%) 48 1701072 5256609 (+209%) 96 1269157 6649326 (+423%) Additionally, a kernel with a private patch to help access() scalability: access2 ("Same file access"): proc stock patched patched +nopause 24 2378041 2005501 5370335 (-15% / +125%) That is, fixing the problems in access itself *reduces* scalability after the cacheline ping-pong only happens in lockref with the pause instruction. Note that fstat and access benchmarks are not currently integrated into will-it-scale, but interested parties can find them in pull requests to said project. Code at hand has a rather tortured history. First modification showed up in commit d472d9d98b46 ("lockref: Relax in cmpxchg loop"), written with Itanium in mind. Later it got patched up to use an arch-dependent macro to stop doing it on s390 where it caused a significant regression. Said macro had undergone revisions and was ultimately eliminated later, going back to cpu_relax. While I intended to only remove cpu_relax for x86-64, I got the following comment from Linus: I would actually prefer just removing it entirely and see if somebody else hollers. You have the numbers to prove it hurts on real hardware, and I don't think we have any numbers to the contrary. So I think it's better to trust the numbers and remove it as a failure, than say "let's just remove it on x86-64 and leave everybody else with the potentially broken code" Additionally, Will Deacon (maintainer of the arm64 port, one of the architectures previously benchmarked): So, from the arm64 side of the fence, I'm perfectly happy just removing the cpu_relax() calls from lockref. As such, come back full circle in history and whack it altogether. Signed-off-by: Mateusz Guzik <mjguzik@gmail.com> Link: https://lore.kernel.org/all/CAGudoHHx0Nqg6DE70zAVA75eV-HXfWyhVMWZ-aSeOofkA_=WdA@mail.gmail.com/ Acked-by: Tony Luck <tony.luck@intel.com> # ia64 Acked-by: Nicholas Piggin <npiggin@gmail.com> # powerpc Acked-by: Will Deacon <will@kernel.org> # arm64 Acked-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-01-13x86/pci: Treat EfiMemoryMappedIO as reservation of ECAM spaceBjorn Helgaas
Normally we reject ECAM space unless it is reported as reserved in the E820 table or via a PNP0C02 _CRS method (PCI Firmware, r3.3, sec 4.1.2). 07eab0901ede ("efi/x86: Remove EfiMemoryMappedIO from E820 map"), removes E820 entries that correspond to EfiMemoryMappedIO regions because some other firmware uses EfiMemoryMappedIO for PCI host bridge windows, and the E820 entries prevent Linux from allocating BAR space for hot-added devices. Some firmware doesn't report ECAM space via PNP0C02 _CRS methods, but does mention it as an EfiMemoryMappedIO region via EFI GetMemoryMap(), which is normally converted to an E820 entry by a bootloader or EFI stub. After 07eab0901ede, that E820 entry is removed, so we reject this ECAM space, which makes PCI extended config space (offsets 0x100-0xfff) inaccessible. The lack of extended config space breaks anything that relies on it, including perf, VSEC telemetry, EDAC, QAT, SR-IOV, etc. Allow use of ECAM for extended config space when the region is covered by an EfiMemoryMappedIO region, even if it's not included in E820 or PNP0C02 _CRS. Link: https://lore.kernel.org/r/ac2693d8-8ba3-72e0-5b66-b3ae008d539d@linux.intel.com Link: https://bugzilla.kernel.org/show_bug.cgi?id=216891 Fixes: 07eab0901ede ("efi/x86: Remove EfiMemoryMappedIO from E820 map") Link: https://lore.kernel.org/r/20230110180243.1590045-3-helgaas@kernel.org Reported-by: Kan Liang <kan.liang@linux.intel.com> Reported-by: Tony Luck <tony.luck@intel.com> Reported-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Reported-by: Yunying Sun <yunying.sun@intel.com> Reported-by: Baowen Zheng <baowen.zheng@corigine.com> Reported-by: Zhenzhong Duan <zhenzhong.duan@intel.com> Reported-by: Yang Lixiao <lixiao.yang@intel.com> Tested-by: Tony Luck <tony.luck@intel.com> Tested-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Tested-by: Kan Liang <kan.liang@linux.intel.com> Tested-by: Yunying Sun <yunying.sun@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Rafael J. Wysocki <rafael@kernel.org>
2023-01-13ixgbe: Filter out spurious link up indicationSebastian Czapla
Add delayed link state recheck to filter false link up indication caused by transceiver with no fiber cable attached. Signed-off-by: Sebastian Czapla <sebastianx.czapla@intel.com> Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-01-13ixgbe: XDP: fix checker warning from rcu pointerJesse Brandeburg
The ixgbe driver uses an older style failure mode when initializing the XDP program and the queues. It causes some warnings when running C=2 checking builds (and it's the last one in the ethernet/intel tree). $ make W=1 C=2 M=`pwd`/drivers/net/ethernet/intel modules .../ixgbe_main.c:10301:25: error: incompatible types in comparison expression (different address spaces): .../ixgbe_main.c:10301:25: struct bpf_prog [noderef] __rcu * .../ixgbe_main.c:10301:25: struct bpf_prog * Fix the problem by removing the line that tried to re-xchg "the old_prog pointer" if there was an error, to make this driver act like the other drivers which return the error code without "pointer restoration." Also, update the "copy the pointer" logic to use WRITE_ONCE as many/all the other drivers do, which required making a change in two separate functions that write the xdp_prog variable in the ring. The code here was modeled after the code in i40e/i40e_xdp_setup(). NOTE: Compile-tested only. CC: Maciej Fijalkowski <maciej.fijalkowski@intel.com> CC: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-01-13Merge tag 'efi-fixes-for-v6.2-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi Pull EFI fixes from Ard Biesheuvel: - avoid a potential crash on the efi_subsys_init() error path - use more appropriate error code for runtime services calls issued after a crash in the firmware occurred - avoid READ_ONCE() for accessing firmware tables that may appear misaligned in memory * tag 'efi-fixes-for-v6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: efi: tpm: Avoid READ_ONCE() for accessing the event log efi: rt-wrapper: Add missing include efi: fix userspace infinite retry read efivars after EFI runtime services page fault efi: fix NULL-deref in init error path
2023-01-13Merge tag 'docs-6.2-fixes' of git://git.lwn.net/linuxLinus Torvalds
Pull documentation fixes from Jonathan Corbet: "Three documentation fixes (or rather two and one warning): - Sphinx 6.0 broke our configuration mechanism, so fix it - I broke our configuration for non-Alabaster themes; Akira fixed it - Deprecate Sphinx < 2.4 with an eye toward future removal" * tag 'docs-6.2-fixes' of git://git.lwn.net/linux: docs/conf.py: Use about.html only in sidebar of alabaster theme docs: Deprecate use of Sphinx < 2.4.x docs: Fix the docs build with Sphinx 6.0
2023-01-13bpf: Fix pointer-leak due to insufficient speculative store bypass mitigationLuis Gerhorst
To mitigate Spectre v4, 2039f26f3aca ("bpf: Fix leakage due to insufficient speculative store bypass mitigation") inserts lfence instructions after 1) initializing a stack slot and 2) spilling a pointer to the stack. However, this does not cover cases where a stack slot is first initialized with a pointer (subject to sanitization) but then overwritten with a scalar (not subject to sanitization because the slot was already initialized). In this case, the second write may be subject to speculative store bypass (SSB) creating a speculative pointer-as-scalar type confusion. This allows the program to subsequently leak the numerical pointer value using, for example, a branch-based cache side channel. To fix this, also sanitize scalars if they write a stack slot that previously contained a pointer. Assuming that pointer-spills are only generated by LLVM on register-pressure, the performance impact on most real-world BPF programs should be small. The following unprivileged BPF bytecode drafts a minimal exploit and the mitigation: [...] // r6 = 0 or 1 (skalar, unknown user input) // r7 = accessible ptr for side channel // r10 = frame pointer (fp), to be leaked // r9 = r10 # fp alias to encourage ssb *(u64 *)(r9 - 8) = r10 // fp[-8] = ptr, to be leaked // lfence added here because of pointer spill to stack. // // Ommitted: Dummy bpf_ringbuf_output() here to train alias predictor // for no r9-r10 dependency. // *(u64 *)(r10 - 8) = r6 // fp[-8] = scalar, overwrites ptr // 2039f26f3aca: no lfence added because stack slot was not STACK_INVALID, // store may be subject to SSB // // fix: also add an lfence when the slot contained a ptr // r8 = *(u64 *)(r9 - 8) // r8 = architecturally a scalar, speculatively a ptr // // leak ptr using branch-based cache side channel: r8 &= 1 // choose bit to leak if r8 == 0 goto SLOW // no mispredict // architecturally dead code if input r6 is 0, // only executes speculatively iff ptr bit is 1 r8 = *(u64 *)(r7 + 0) # encode bit in cache (0: slow, 1: fast) SLOW: [...] After running this, the program can time the access to *(r7 + 0) to determine whether the chosen pointer bit was 0 or 1. Repeat this 64 times to recover the whole address on amd64. In summary, sanitization can only be skipped if one scalar is overwritten with another scalar. Scalar-confusion due to speculative store bypass can not lead to invalid accesses because the pointer bounds deducted during verification are enforced using branchless logic. See 979d63d50c0c ("bpf: prevent out of bounds speculation on pointer arithmetic") for details. Do not make the mitigation depend on !env->allow_{uninit_stack,ptr_leaks} because speculative leaks are likely unexpected if these were enabled. For example, leaking the address to a protected log file may be acceptable while disabling the mitigation might unintentionally leak the address into the cached-state of a map that is accessible to unprivileged processes. Fixes: 2039f26f3aca ("bpf: Fix leakage due to insufficient speculative store bypass mitigation") Signed-off-by: Luis Gerhorst <gerhorst@cs.fau.de> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Henriette Hofmeier <henriette.hofmeier@rub.de> Link: https://lore.kernel.org/bpf/edc95bad-aada-9cfc-ffe2-fa9bb206583c@cs.fau.de Link: https://lore.kernel.org/bpf/20230109150544.41465-1-gerhorst@cs.fau.de
2023-01-13efi: tpm: Avoid READ_ONCE() for accessing the event logArd Biesheuvel
Nathan reports that recent kernels built with LTO will crash when doing EFI boot using Fedora's GRUB and SHIM. The culprit turns out to be a misaligned load from the TPM event log, which is annotated with READ_ONCE(), and under LTO, this gets translated into a LDAR instruction which does not tolerate misaligned accesses. Interestingly, this does not happen when booting the same kernel straight from the UEFI shell, and so the fact that the event log may appear misaligned in memory may be caused by a bug in GRUB or SHIM. However, using READ_ONCE() to access firmware tables is slightly unusual in any case, and here, we only need to ensure that 'event' is not dereferenced again after it gets unmapped, but this is already taken care of by the implicit barrier() semantics of the early_memunmap() call. Cc: <stable@vger.kernel.org> Cc: Peter Jones <pjones@redhat.com> Cc: Jarkko Sakkinen <jarkko@kernel.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Reported-by: Nathan Chancellor <nathan@kernel.org> Tested-by: Nathan Chancellor <nathan@kernel.org> Link: https://github.com/ClangBuiltLinux/linux/issues/1782 Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2023-01-13io_uring: lock overflowing for IOPOLLPavel Begunkov
syzbot reports an issue with overflow filling for IOPOLL: WARNING: CPU: 0 PID: 28 at io_uring/io_uring.c:734 io_cqring_event_overflow+0x1c0/0x230 io_uring/io_uring.c:734 CPU: 0 PID: 28 Comm: kworker/u4:1 Not tainted 6.2.0-rc3-syzkaller-16369-g358a161a6a9e #0 Workqueue: events_unbound io_ring_exit_work Call trace:  io_cqring_event_overflow+0x1c0/0x230 io_uring/io_uring.c:734  io_req_cqe_overflow+0x5c/0x70 io_uring/io_uring.c:773  io_fill_cqe_req io_uring/io_uring.h:168 [inline]  io_do_iopoll+0x474/0x62c io_uring/rw.c:1065  io_iopoll_try_reap_events+0x6c/0x108 io_uring/io_uring.c:1513  io_uring_try_cancel_requests+0x13c/0x258 io_uring/io_uring.c:3056  io_ring_exit_work+0xec/0x390 io_uring/io_uring.c:2869  process_one_work+0x2d8/0x504 kernel/workqueue.c:2289  worker_thread+0x340/0x610 kernel/workqueue.c:2436  kthread+0x12c/0x158 kernel/kthread.c:376  ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:863 There is no real problem for normal IOPOLL as flush is also called with uring_lock taken, but it's getting more complicated for IOPOLL|SQPOLL, for which __io_cqring_overflow_flush() happens from the CQ waiting path. Reported-and-tested-by: syzbot+6805087452d72929404e@syzkaller.appspotmail.com Cc: stable@vger.kernel.org # 5.10+ Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-13Merge tag 'sound-6.2-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "This became a slightly big update, but it's more or less expected, as the first batch after holidays. All changes (but for the last two last-minute fixes) have been stewed in linux-next long enough, so it's fairly safe to take: - PCM UAF fix in 32bit compat layer - ASoC board-specific fixes for Intel, AMD, Medathek, Qualcomm - SOF power management fixes - ASoC Intel link failure fixes - A series of fixes for USB-audio regressions - CS35L41 HD-audio codec regression fixes - HD-audio device-specific fixes / quirks Note that one SPI patch has been taken in ASoC subtree mistakenly, and the same fix is found in spi tree, but it should be OK to apply" * tag 'sound-6.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (39 commits) ALSA: pcm: Move rwsem lock inside snd_ctl_elem_read to prevent UAF ALSA: usb-audio: Fix possible NULL pointer dereference in snd_usb_pcm_has_fixed_rate() ALSA: hda/realtek: Enable mute/micmute LEDs on HP Spectre x360 13-aw0xxx ASoC: fsl-asoc-card: Fix naming of AC'97 CODEC widgets ASoC: fsl_ssi: Rename AC'97 streams to avoid collisions with AC'97 CODEC ALSA: hda/hdmi: Add a HP device 0x8715 to force connect list ALSA: control-led: use strscpy in set_led_id() ALSA: usb-audio: Always initialize fixed_rate in snd_usb_find_implicit_fb_sync_format() ASoC: dt-bindings: qcom,lpass-tx-macro: correct clocks on SC7280 ASoC: dt-bindings: qcom,lpass-wsa-macro: correct clocks on SM8250 ASoC: qcom: Fix building APQ8016 machine driver without SOUNDWIRE ALSA: hda: cs35l41: Check runtime suspend capability at runtime_idle ALSA: hda: cs35l41: Don't return -EINVAL from system suspend/resume ASoC: fsl_micfil: Correct the number of steps on SX controls ALSA: hda/realtek: fix mute/micmute LEDs don't work for a HP platform Revert "ALSA: usb-audio: Drop superfluous interface setup at parsing" ALSA: usb-audio: More refactoring of hw constraint rules ALSA: usb-audio: Relax hw constraints for implicit fb sync ALSA: usb-audio: Make sure to stop endpoints before closing EPs ALSA: hda - Enable headset mic on another Dell laptop with ALC3254 ...
2023-01-13tomoyo: Update website linkTetsuo Handa
SourceForge.JP was renamed to OSDN in May 2015. Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
2023-01-13tomoyo: Remove "select SRCU"Paul E. McKenney
Now that the SRCU Kconfig option is unconditionally selected, there is no longer any point in selecting it. Therefore, remove the "select SRCU" Kconfig statements. Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
2023-01-13Merge tag 'pm-6.2-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix assorted issues in the ARM cpufreq drivers and in the AMD P-state driver. Specifics: - Fix cpufreq policy reference counting in amd-pstate to prevent it from crashing on removal (Perry Yuan) - Fix double initialization and set suspend-freq for Apple's cpufreq driver (Arnd Bergmann, Hector Martin) - Fix reading of "reg" property, update cpufreq-dt's blocklist and update DT documentation for Qualcomm's cpufreq driver (Konrad Dybcio, Krzysztof Kozlowski) - Replace 0 with NULL in the Armada cpufreq driver (Miles Chen) - Fix potential overflows in the CPPC cpufreq driver (Pierre Gondois) - Update blocklist for the Tegra234 Soc cpufreq driver (Sumit Gupta)" * tag 'pm-6.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: amd-pstate: fix kernel hang issue while amd-pstate unregistering cpufreq: armada-37xx: stop using 0 as NULL pointer cpufreq: apple-soc: Switch to the lowest frequency on suspend dt-bindings: cpufreq: cpufreq-qcom-hw: document interrupts cpufreq: Add SM6375 to cpufreq-dt-platdev blocklist cpufreq: Add Tegra234 to cpufreq-dt-platdev blocklist cpufreq: qcom-hw: Fix reading "reg" with address/size-cells != 2 cpufreq: CPPC: Add u64 casts to avoid overflowing cpufreq: apple: remove duplicate intializer
2023-01-13Merge tag 'acpi-6.2-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "These add one more ACPI IRQ override quirk, improve ACPI companion lookup for backlight devices and add missing kernel command line option values for backlight detection. Specifics: - Improve ACPI companion lookup for backlight devices in the cases when there is more than one candidate ACPI device object (Hans de Goede) - Add missing support for manual selection of NVidia-WMI-EC or Apple GMUX backlight in the kernel command line to the ACPI backlight driver (Hans de Goede) - Skip ACPI IRQ override on Asus Expertbook B2402CBA (Tamim Khan)" * tag 'acpi-6.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: Fix selecting wrong ACPI fwnode for the iGPU on some Dell laptops ACPI: video: Allow selecting NVidia-WMI-EC or Apple GMUX backlight from the cmdline ACPI: resource: Skip IRQ override on Asus Expertbook B2402CBA
2023-01-13Merge tag 'platform-drivers-x86-v6.2-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Hans de Goede: "A set of assorted fixes and hardware-id additions" * tag 'platform-drivers-x86-v6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86: thinkpad_acpi: Fix profile mode display in AMT mode platform/x86: int3472/discrete: Ensure the clk/power enable pins are in output mode platform/x86/amd: Fix refcount leak in amd_pmc_probe platform/x86: intel/pmc/core: Add Meteor Lake mobile support platform/x86: simatic-ipc: add another model platform/x86: simatic-ipc: correct name of a model platform/x86: dell-privacy: Only register SW_CAMERA_LENS_COVER if present platform/x86: dell-privacy: Fix SW_CAMERA_LENS_COVER reporting platform/x86: asus-wmi: Don't load fan curves without fan platform/x86: asus-wmi: Ignore fan on E410MA platform/x86: asus-wmi: Add quirk wmi_ignore_fan platform/x86: asus-nb-wmi: Add alternate mapping for KEY_SCREENLOCK platform/x86: asus-nb-wmi: Add alternate mapping for KEY_CAMERA platform/surface: aggregator: Add missing call to ssam_request_sync_free() platform/surface: aggregator: Ignore command messages not intended for us platform/x86: touchscreen_dmi: Add info for the CSL Panther Tab HD platform/x86: ideapad-laptop: Add Legion 5 15ARH05 DMI id to set_fn_lock_led_list[] platform/x86: sony-laptop: Don't turn off 0x153 keyboard backlight during probe
2023-01-13Merge tag 'drm-fixes-2023-01-13' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "There is a bit of a post-holiday build up here I expect, small fixes across the board, amdgpu and msm being the main leaders, with others having a few. One code removal patch for nouveau: buddy: - benchmark regression fix for top-down buddy allocation panel: - add Lenovo panel orientation quirk ttm: - fix kernel oops regression amdgpu: - fix missing fence references - fix missing pipeline sync fencing - SMU13 fan speed fix - SMU13 fix power cap handling - SMU13 BACO fix - Fix a possible segfault in bo validation error case - Delay removal of firmware framebuffer - Fix error when unloading amdkfd: - SVM fix when clearing vram - GC11 fix for multi-GPU i915: - Reserve enough fence slot for i915_vma_unbind_vsync - Fix potential use after free - Reset engines twice in case of reset failure - Use multi-cast registers for SVG Unit registers msm: - display: - doc warning fixes - dt attribs cleanups - memory leak fix - error handing in hdmi probe fix - dp_aux_isr incorrect signalling fix - shutdown path fix - accel: - a5xx: fix quirks to be a bitmask - a6xx: fix gx halt to avoid 1s hang - kexec shutdown fix - fix potential double free vmwgfx: - drop rcu usage to make code more robust virtio: - fix use-after-free in gem handle code nouveau: - drop unused nouveau_fbcon.c" * tag 'drm-fixes-2023-01-13' of git://anongit.freedesktop.org/drm/drm: (35 commits) drm: Optimize drm buddy top-down allocation method drm/ttm: Fix a regression causing kernel oops'es drm/i915/gt: Cover rest of SVG unit MCR registers drm/nouveau: Remove file nouveau_fbcon.c drm/amdkfd: Fix NULL pointer error for GC 11.0.1 on mGPU drm/amd/pm/smu13: BACO is supported when it's in BACO state drm/amdkfd: Add sync after creating vram bo drm/i915/gt: Reset twice drm/amdgpu: fix pipeline sync v2 drm/vmwgfx: Remove rcu locks from user resources drm/virtio: Fix GEM handle creation UAF drm/amdgpu: Fixed bug on error when unloading amdgpu drm/amd: Delay removal of the firmware framebuffer drm/amdgpu: Fix potential NULL dereference drm/i915: Fix potential context UAFs drm/i915: Reserve enough fence slot for i915_vma_unbind_async drm: Add orientation quirk for Lenovo ideapad D330-10IGL drm/msm/a6xx: Avoid gx gbit halt during rpm suspend drm/msm/adreno: Make adreno quirks not overwrite each other drm/msm: another fix for the headless Adreno GPU ...
2023-01-13ALSA: pcm: Move rwsem lock inside snd_ctl_elem_read to prevent UAFClement Lecigne
Takes rwsem lock inside snd_ctl_elem_read instead of snd_ctl_elem_read_user like it was done for write in commit 1fa4445f9adf1 ("ALSA: control - introduce snd_ctl_notify_one() helper"). Doing this way we are also fixing the following locking issue happening in the compat path which can be easily triggered and turned into an use-after-free. 64-bits: snd_ctl_ioctl snd_ctl_elem_read_user [takes controls_rwsem] snd_ctl_elem_read [lock properly held, all good] [drops controls_rwsem] 32-bits: snd_ctl_ioctl_compat snd_ctl_elem_write_read_compat ctl_elem_write_read snd_ctl_elem_read [missing lock, not good] CVE-2023-0266 was assigned for this issue. Cc: stable@kernel.org # 5.13+ Signed-off-by: Clement Lecigne <clecigne@google.com> Reviewed-by: Jaroslav Kysela <perex@perex.cz> Link: https://lore.kernel.org/r/20230113120745.25464-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-01-13Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "Here's a sizeable batch of Friday the 13th arm64 fixes for -rc4. What could possibly go wrong? The obvious reason we have so much here is because of the holiday season right after the merge window, but we've also brought back an erratum workaround that was previously dropped at the last minute and there's an MTE coredumping fix that strays outside of the arch/arm64 directory. Summary: - Fix PAGE_TABLE_CHECK failures on hugepage splitting path - Fix PSCI encoding of MEM_PROTECT_RANGE function in UAPI header - Fix NULL deref when accessing debugfs node if PSCI is not present - Fix MTE core dumping when VMA list is being updated concurrently - Fix SME signal frame handling when SVE is not implemented by the CPU - Fix asm constraints for cmpxchg_double() to hazard both words - Fix build failure with stack tracer and older versions of Clang - Bring back workaround for Cortex-A715 erratum 2645198" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: Fix build with CC=clang, CONFIG_FTRACE=y and CONFIG_STACK_TRACER=y arm64/mm: Define dummy pud_user_exec() when using 2-level page-table arm64: errata: Workaround possible Cortex-A715 [ESR|FAR]_ELx corruption firmware/psci: Don't register with debugfs if PSCI isn't available firmware/psci: Fix MEM_PROTECT_RANGE function numbers arm64/signal: Always allocate SVE signal frames on SME only systems arm64/signal: Always accept SVE signal frames on SME only systems arm64/sme: Fix context switch for SME only systems arm64: cmpxchg_double*: hazard against entire exchange variable arm64/uprobes: change the uprobe_opcode_t typedef to fix the sparse warning arm64: mte: Avoid the racy walk of the vma list during core dump elfcore: Add a cprm parameter to elf_core_extra_{phdrs,data_size} arm64: mte: Fix double-freeing of the temporary tag storage during coredump arm64: ptrace: Use ARM64_SME to guard the SME register enumerations arm64/mm: add pud_user_exec() check in pud_user_accessible_page() arm64/mm: fix incorrect file_map_count for invalid pmd
2023-01-13iommu/mediatek-v1: Fix an error handling path in mtk_iommu_v1_probe()Christophe JAILLET
A clk, prepared and enabled in mtk_iommu_v1_hw_init(), is not released in the error handling path of mtk_iommu_v1_probe(). Add the corresponding clk_disable_unprepare(), as already done in the remove function. Fixes: b17336c55d89 ("iommu/mediatek: add support for mtk iommu generation one HW") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/593e7b7d97c6e064b29716b091a9d4fd122241fb.1671473163.git.christophe.jaillet@wanadoo.fr Signed-off-by: Joerg Roedel <jroedel@suse.de>
2023-01-13iommu/iova: Fix alloc iova overflows issueYunfei Wang
In __alloc_and_insert_iova_range, there is an issue that retry_pfn overflows. The value of iovad->anchor.pfn_hi is ~0UL, then when iovad->cached_node is iovad->anchor, curr_iova->pfn_hi + 1 will overflow. As a result, if the retry logic is executed, low_pfn is updated to 0, and then new_pfn < low_pfn returns false to make the allocation successful. This issue occurs in the following two situations: 1. The first iova size exceeds the domain size. When initializing iova domain, iovad->cached_node is assigned as iovad->anchor. For example, the iova domain size is 10M, start_pfn is 0x1_F000_0000, and the iova size allocated for the first time is 11M. The following is the log information, new->pfn_lo is smaller than iovad->cached_node. Example log as follows: [ 223.798112][T1705487] sh: [name:iova&]__alloc_and_insert_iova_range start_pfn:0x1f0000,retry_pfn:0x0,size:0xb00,limit_pfn:0x1f0a00 [ 223.799590][T1705487] sh: [name:iova&]__alloc_and_insert_iova_range success start_pfn:0x1f0000,new->pfn_lo:0x1efe00,new->pfn_hi:0x1f08ff 2. The node with the largest iova->pfn_lo value in the iova domain is deleted, iovad->cached_node will be updated to iovad->anchor, and then the alloc iova size exceeds the maximum iova size that can be allocated in the domain. After judging that retry_pfn is less than limit_pfn, call retry_pfn+1 to fix the overflow issue. Signed-off-by: jianjiao zeng <jianjiao.zeng@mediatek.com> Signed-off-by: Yunfei Wang <yf.wang@mediatek.com> Cc: <stable@vger.kernel.org> # 5.15.* Fixes: 4e89dce72521 ("iommu/iova: Retry from last rb tree node if iova search fails") Acked-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/20230111063801.25107-1-yf.wang@mediatek.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2023-01-13iommu: Fix refcount leak in iommu_device_claim_dma_ownerMiaoqian Lin
iommu_group_get() returns the group with the reference incremented. Move iommu_group_get() after owner check to fix the refcount leak. Fixes: 89395ccedbc1 ("iommu: Add device-centric DMA ownership interfaces") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/20221230083100.1489569-1-linmq006@gmail.com [ joro: Remove *group = NULL initialization ] Signed-off-by: Joerg Roedel <jroedel@suse.de>
2023-01-13iommu/arm-smmu-v3: Don't unregister on shutdownVladimir Oltean
Similar to SMMUv2, this driver calls iommu_device_unregister() from the shutdown path, which removes the IOMMU groups with no coordination whatsoever with their users - shutdown methods are optional in device drivers. This can lead to NULL pointer dereferences in those drivers' DMA API calls, or worse. Instead of calling the full arm_smmu_device_remove() from arm_smmu_device_shutdown(), let's pick only the relevant function call - arm_smmu_device_disable() - more or less the reverse of arm_smmu_device_reset() - and call just that from the shutdown path. Fixes: 57365a04c921 ("iommu: Move bus setup to IOMMU device registration") Suggested-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20221215141251.3688780-2-vladimir.oltean@nxp.com Signed-off-by: Will Deacon <will@kernel.org>
2023-01-13iommu/arm-smmu: Don't unregister on shutdownVladimir Oltean
Michael Walle says he noticed the following stack trace while performing a shutdown with "reboot -f". He suggests he got "lucky" and just hit the correct spot for the reboot while there was a packet transmission in flight. Unable to handle kernel NULL pointer dereference at virtual address 0000000000000098 CPU: 0 PID: 23 Comm: kworker/0:1 Not tainted 6.1.0-rc5-00088-gf3600ff8e322 #1930 Hardware name: Kontron KBox A-230-LS (DT) pc : iommu_get_dma_domain+0x14/0x20 lr : iommu_dma_map_page+0x9c/0x254 Call trace: iommu_get_dma_domain+0x14/0x20 dma_map_page_attrs+0x1ec/0x250 enetc_start_xmit+0x14c/0x10b0 enetc_xmit+0x60/0xdc dev_hard_start_xmit+0xb8/0x210 sch_direct_xmit+0x11c/0x420 __dev_queue_xmit+0x354/0xb20 ip6_finish_output2+0x280/0x5b0 __ip6_finish_output+0x15c/0x270 ip6_output+0x78/0x15c NF_HOOK.constprop.0+0x50/0xd0 mld_sendpack+0x1bc/0x320 mld_ifc_work+0x1d8/0x4dc process_one_work+0x1e8/0x460 worker_thread+0x178/0x534 kthread+0xe0/0xe4 ret_from_fork+0x10/0x20 Code: d503201f f9416800 d503233f d50323bf (f9404c00) ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Oops: Fatal exception in interrupt This appears to be reproducible when the board has a fixed IP address, is ping flooded from another host, and "reboot -f" is used. The following is one more manifestation of the issue: $ reboot -f kvm: exiting hardware virtualization cfg80211: failed to load regulatory.db arm-smmu 5000000.iommu: disabling translation sdhci-esdhc 2140000.mmc: Removing from iommu group 11 sdhci-esdhc 2150000.mmc: Removing from iommu group 12 fsl-edma 22c0000.dma-controller: Removing from iommu group 17 dwc3 3100000.usb: Removing from iommu group 9 dwc3 3110000.usb: Removing from iommu group 10 ahci-qoriq 3200000.sata: Removing from iommu group 2 fsl-qdma 8380000.dma-controller: Removing from iommu group 20 platform f080000.display: Removing from iommu group 0 etnaviv-gpu f0c0000.gpu: Removing from iommu group 1 etnaviv etnaviv: Removing from iommu group 1 caam_jr 8010000.jr: Removing from iommu group 13 caam_jr 8020000.jr: Removing from iommu group 14 caam_jr 8030000.jr: Removing from iommu group 15 caam_jr 8040000.jr: Removing from iommu group 16 fsl_enetc 0000:00:00.0: Removing from iommu group 4 arm-smmu 5000000.iommu: Blocked unknown Stream ID 0x429; boot with "arm-smmu.disable_bypass=0" to allow, but this may have security implications arm-smmu 5000000.iommu: GFSR 0x80000002, GFSYNR0 0x00000002, GFSYNR1 0x00000429, GFSYNR2 0x00000000 fsl_enetc 0000:00:00.1: Removing from iommu group 5 arm-smmu 5000000.iommu: Blocked unknown Stream ID 0x429; boot with "arm-smmu.disable_bypass=0" to allow, but this may have security implications arm-smmu 5000000.iommu: GFSR 0x80000002, GFSYNR0 0x00000002, GFSYNR1 0x00000429, GFSYNR2 0x00000000 arm-smmu 5000000.iommu: Blocked unknown Stream ID 0x429; boot with "arm-smmu.disable_bypass=0" to allow, but this may have security implications arm-smmu 5000000.iommu: GFSR 0x80000002, GFSYNR0 0x00000000, GFSYNR1 0x00000429, GFSYNR2 0x00000000 fsl_enetc 0000:00:00.2: Removing from iommu group 6 fsl_enetc_mdio 0000:00:00.3: Removing from iommu group 8 mscc_felix 0000:00:00.5: Removing from iommu group 3 fsl_enetc 0000:00:00.6: Removing from iommu group 7 pcieport 0001:00:00.0: Removing from iommu group 18 arm-smmu 5000000.iommu: Blocked unknown Stream ID 0x429; boot with "arm-smmu.disable_bypass=0" to allow, but this may have security implications arm-smmu 5000000.iommu: GFSR 0x00000002, GFSYNR0 0x00000000, GFSYNR1 0x00000429, GFSYNR2 0x00000000 pcieport 0002:00:00.0: Removing from iommu group 19 Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a8 pc : iommu_get_dma_domain+0x14/0x20 lr : iommu_dma_unmap_page+0x38/0xe0 Call trace: iommu_get_dma_domain+0x14/0x20 dma_unmap_page_attrs+0x38/0x1d0 enetc_unmap_tx_buff.isra.0+0x6c/0x80 enetc_poll+0x170/0x910 __napi_poll+0x40/0x1e0 net_rx_action+0x164/0x37c __do_softirq+0x128/0x368 run_ksoftirqd+0x68/0x90 smpboot_thread_fn+0x14c/0x190 Code: d503201f f9416800 d503233f d50323bf (f9405400) ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Oops: Fatal exception in interrupt ---[ end Kernel panic - not syncing: Oops: Fatal exception in interrupt ]--- The problem seems to be that iommu_group_remove_device() is allowed to run with no coordination whatsoever with the shutdown procedure of the enetc PCI device. In fact, it almost seems as if it implies that the pci_driver :: shutdown() method is mandatory if DMA is used with an IOMMU, otherwise this is inevitable. That was never the case; shutdown methods are optional in device drivers. This is the call stack that leads to iommu_group_remove_device() during reboot: kernel_restart -> device_shutdown -> platform_shutdown -> arm_smmu_device_shutdown -> arm_smmu_device_remove -> iommu_device_unregister -> bus_for_each_dev -> remove_iommu_group -> iommu_release_device -> iommu_group_remove_device I don't know much about the arm_smmu driver, but arm_smmu_device_shutdown() invoking arm_smmu_device_remove() looks suspicious, since it causes the IOMMU device to unregister and that's where everything starts to unravel. It forces all other devices which depend on IOMMU groups to also point their ->shutdown() to ->remove(), which will make reboot slower overall. There are 2 moments relevant to this behavior. First was commit b06c076ea962 ("Revert "iommu/arm-smmu: Make arm-smmu explicitly non-modular"") when arm_smmu_device_shutdown() was made to run the exact same thing as arm_smmu_device_remove(). Prior to that, there was no iommu_device_unregister() call in arm_smmu_device_shutdown(). However, that was benign until commit 57365a04c921 ("iommu: Move bus setup to IOMMU device registration"), which made iommu_device_unregister() call remove_iommu_group(). Restore the old shutdown behavior by making remove() call shutdown(), but shutdown() does not call the remove() specific bits. Fixes: 57365a04c921 ("iommu: Move bus setup to IOMMU device registration") Reported-by: Michael Walle <michael@walle.cc> Tested-by: Michael Walle <michael@walle.cc> # on kontron-sl28 Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20221215141251.3688780-1-vladimir.oltean@nxp.com Signed-off-by: Will Deacon <will@kernel.org>
2023-01-13iommu/arm-smmu: Report IOMMU_CAP_CACHE_COHERENCY even bettererRobin Murphy
Although it's vanishingly unlikely that anyone would integrate an SMMU within a coherent interconnect without also making the pagetable walk interface coherent, the same effect happens if a coherent SMMU fails to advertise CTTW correctly. This turns out to be the case on some popular NXP SoCs, where VFIO started failing the IOMMU_CAP_CACHE_COHERENCY test, even though IOMMU_CACHE *was* previously achieving the desired effect anyway thanks to the underlying integration. While those SoCs stand to gain some more general benefits from a firmware update to override CTTW correctly in DT/ACPI, it's also easy to work around this in Linux as well, to avoid imposing too much on affected users - since the upstream client devices *are* correctly marked as coherent, we can trivially infer their coherent paths through the SMMU as well. Reported-by: Vladimir Oltean <vladimir.oltean@nxp.com> Fixes: df198b37e72c ("iommu/arm-smmu: Report IOMMU_CAP_CACHE_COHERENCY better") Signed-off-by: Robin Murphy <robin.murphy@arm.com> Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/d6dc41952961e5c7b21acac08a8bf1eb0f69e124.1671123115.git.robin.murphy@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2023-01-13platform/x86: thinkpad_acpi: Fix profile mode display in AMT modeMark Pearson
Recently AMT mode was enabled (somewhat unexpectedly) on the Lenovo Z13 platform. The FW is advertising it is available and the driver tries to use it - unfortunately it reports the profile mode incorrectly. Note, there is also some extra work needed to enable the dynamic aspect of AMT support that I will be following up with; but more testing is needed first. This patch just fixes things so the profiles are reported correctly. Link: https://gitlab.freedesktop.org/hadess/power-profiles-daemon/-/issues/115 Fixes: 46dcbc61b739 ("platform/x86: thinkpad-acpi: Add support for automatic mode transitions") Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca> Link: https://lore.kernel.org/r/20230112221228.490946-1-mpearson-lenovo@squebb.ca Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-01-13sock: add tracepoint for send recv lengthYunhui Cui
Add 2 tracepoints to monitor the tcp/udp traffic of per process and per cgroup. Regarding monitoring the tcp/udp traffic of each process, there are two existing solutions, the first one is https://www.atoptool.nl/netatop.php. The second is via kprobe/kretprobe. Netatop solution is implemented by registering the hook function at the hook point provided by the netfilter framework. These hook functions may be in the soft interrupt context and cannot directly obtain the pid. Some data structures are added to bind packets and processes. For example, struct taskinfobucket, struct taskinfo ... Every time the process sends and receives packets it needs multiple hashmaps,resulting in low performance and it has the problem fo inaccurate tcp/udp traffic statistics(for example: multiple threads share sockets). We can obtain the information with kretprobe, but as we know, kprobe gets the result by trappig in an exception, which loses performance compared to tracepoint. We compared the performance of tracepoints with the above two methods, and the results are as follows: ab -n 1000000 -c 1000 -r http://127.0.0.1/index.html without trace: Time per request: 39.660 [ms] (mean) Time per request: 0.040 [ms] (mean, across all concurrent requests) netatop: Time per request: 50.717 [ms] (mean) Time per request: 0.051 [ms] (mean, across all concurrent requests) kr: Time per request: 43.168 [ms] (mean) Time per request: 0.043 [ms] (mean, across all concurrent requests) tracepoint: Time per request: 41.004 [ms] (mean) Time per request: 0.041 [ms] (mean, across all concurrent requests It can be seen that tracepoint has better performance. Signed-off-by: Yunhui Cui <cuiyunhui@bytedance.com> Signed-off-by: Xiongchun Duan <duanxiongchun@bytedance.com> Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-13Merge branch 'rmnet-tx-pkt-aggregation'David S. Miller
Daniele Palmas says: ==================== net: add tx packets aggregation to ethtool and rmnet Hello maintainers and all, this patchset implements tx qmap packets aggregation in rmnet and generic ethtool support for that. Some low-cat Thread-x based modems are not capable of properly reaching the maximum allowed throughput both in tx and rx during a bidirectional test if tx packets aggregation is not enabled. I verified this problem with rmnet + qmi_wwan by using a MDM9207 Cat. 4 based modem (50Mbps/150Mbps max throughput). What is actually happening is pictured at https://drive.google.com/file/d/1gSbozrtd9h0X63i6vdkNpN68d-9sg8f9/view Testing with iperf TCP, when rx and tx flows are tested singularly there's no issue in tx and minor issues in rx (not able to reach max throughput). When there are concurrent tx and rx flows, tx throughput has an huge drop. rx a minor one, but still present. The same scenario with tx aggregation enabled is pictured at https://drive.google.com/file/d/1jcVIKNZD7K3lHtwKE5W02mpaloudYYih/view showing a regular graph. This issue does not happen with high-cat modems (e.g. SDX20), or at least it does not happen at the throughputs I'm able to test currently: maybe the same could happen when moving close to the maximum rates supported by those modems. Anyway, having the tx aggregation enabled should not hurt. The first attempt to solve this issue was in qmi_wwan qmap implementation, see the discussion at https://lore.kernel.org/netdev/20221019132503.6783-1-dnlplm@gmail.com/ However, it turned out that rmnet was a better candidate for the implementation. Moreover, Greg and Jakub suggested also to use ethtool for the configuration: not sure if I got their advice right, but this patchset add also generic ethtool support for tx aggregation. The patches have been tested mainly against an MDM9207 based modem through USB and SDX55 through PCI (MHI). v2 should address the comments highlighted in the review: the implementation is still in rmnet, due to Subash's request of keeping tx aggregation there. v3 fixes ethtool-netlink.rst content out of table bounds and a W=1 build warning for patch 2. v4 solves a race related to egress_agg_params. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-13net: qualcomm: rmnet: add ethtool support for configuring tx aggregationDaniele Palmas
Add support for ETHTOOL_COALESCE_TX_AGGR for configuring the tx aggregation settings. Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-13net: qualcomm: rmnet: add tx packets aggregationDaniele Palmas
Add tx packets aggregation. Bidirectional TCP throughput tests through iperf with low-cat Thread-x based modems revelead performance issues both in tx and rx. The Windows driver does not show this issue: inspecting USB packets revealed that the only notable change is the driver enabling tx packets aggregation. Tx packets aggregation is by default disabled and can be enabled by increasing the value of ETHTOOL_A_COALESCE_TX_MAX_AGGR_FRAMES. The maximum aggregated size is by default set to a reasonably low value in order to support the majority of modems. This implementation is based on patches available in Code Aurora repositories (msm kernel) whose main authors are Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Sean Tranchetti <stranche@codeaurora.org> Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Reviewed-by: Subash Abhinov Kasiviswanathan <quic_subashab@quicinc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-13ethtool: add tx aggregation parametersDaniele Palmas
Add the following ethtool tx aggregation parameters: ETHTOOL_A_COALESCE_TX_AGGR_MAX_BYTES Maximum size in bytes of a tx aggregated block of frames. ETHTOOL_A_COALESCE_TX_AGGR_MAX_FRAMES Maximum number of frames that can be aggregated into a block. ETHTOOL_A_COALESCE_TX_AGGR_TIME_USECS Time in usecs after the first packet arrival in an aggregated block for the block to be sent. Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-13Merge branches 'acpi-resource' and 'acpi-video'Rafael J. Wysocki
Merge an ACPI resource management quirk and an ACPI backlight driver fix for 6.2-rc4: - Skip ACPI IRQ override on Asus Expertbook B2402CBA (Tamim Khan). - Add missing support for manual selection of NVidia-WMI-EC or Apple GMUX backlight in the kernel command line to the ACPI backlight driver (Hans de Goede). * acpi-resource: ACPI: resource: Skip IRQ override on Asus Expertbook B2402CBA * acpi-video: ACPI: video: Allow selecting NVidia-WMI-EC or Apple GMUX backlight from the cmdline
2023-01-13ALSA: usb-audio: Fix possible NULL pointer dereference in ↵Jaroslav Kysela
snd_usb_pcm_has_fixed_rate() The subs function argument may be NULL, so do not use it before the NULL check. Fixes: 291e9da91403 ("ALSA: usb-audio: Always initialize fixed_rate in snd_usb_find_implicit_fb_sync_format()") Reported-by: coverity-bot <keescook@chromium.org> Link: https://lore.kernel.org/alsa-devel/202301121424.4A79A485@keescook/ Signed-off-by: Jaroslav Kysela <perex@perex.cz> Link: https://lore.kernel.org/r/20230113085311.623325-1-perex@perex.cz Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-01-13Merge branch 'dsa-microchip-ptp'David S. Miller
Arun Ramadoss says: ==================== net: dsa: microchip: add PTP support for KSZ9563/KSZ8563 and LAN937x KSZ9563/KSZ8563 and LAN937x switch are capable for supporting IEEE 1588 PTP protocol. LAN937x has the same PTP register set similar to KSZ9563, hence the implementation has been made common for the KSZ switches. KSZ9563 does not support two step timestamping but LAN937x supports both. Tested the 1step & 2step p2p timestamping in LAN937x and p2p1step timestamping in KSZ9563. This patch series is based on the Christian Eggers PTP support for KSZ9563. Applied the Christian patch and updated as per the latest refactoring of KSZ series code. The features added on top are PTP packet Interrupt implementation based on nested handler, LAN937x two step timestamping and programmable per_out pins. Link: https://www.spinics.net/lists/netdev/msg705531.html Patch v7 -> v8 - set skb->ip_summed = CHECKSUM_NONE after updating the checksum Patch v6 -> v7 - Corrected the misplaced spaces and tabs - Added mutex lock in do_aux_work - Replaced 0/1 with false/true for ts_en - SKB_TX_INPROGRESS flag is set before dsa_enqueue_skb - Removed the fallthrough keyword - pdelay_resp header correction is performed based on KSZ_SKB_CB(skb)->update_correction instead of clone Patch v5 -> v6 - Rebased to latest net-next and renamed from RFC to patch net-next. Patch v4 -> v5 - Replaced irq_domain_add_simple with irq_doamin_add_linear - Used the helper diff_by_scaled_ppm() for adjfine. Patch v3 -> v4 - removed IRQF_TRIGGER_FALLING from the request_threaded_irq of ptp msg - addressed review comments on patch 10 periodic output - added sign off in patch 6 & 9 - reverted to set PTP_1STEP bit for lan937x which is missed during v3 regression Patch v2-> v3 - used port_rxtstamp for reconstructing the absolute timestamp instead of tagger function pointer. - Reverted to setting of 802.1As bit. Patch v1 -> v2 - GPIO perout enable bit is different for LAN937x and KSZ9x. Added new patch for configuring LAN937x programmable pins. - PTP enabled in hardware based on both tx and rx timestamping of all the user ports. - Replaced setting of 802.1AS bit with P2P bit in PTP_MSG_CONF1 register. RFC v2 -> Patch v1 - Changed the patch author based on past patch submission - Changed the commit message prefix as net: dsa: microchip: ptp Individual patch changes are listed in correspondig commits. RFC v1 -> v2 - Added the p2p1step timestamping and conditional execution of 2 step for LAN937x only. - Added the periodic output support ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-13net: dsa: microchip: ptp: lan937x: Enable periodic output in LED pinsArun Ramadoss
There is difference in implementation of per_out pins between KSZ9563 and LAN937x. In KSZ9563, Timestamping control register (0x052C) bit 6, if 1 - timestamp input and 0 - trigger output. But it is opposite for LAN937x 1 - trigger output and 0 - timestamp input. As per per_out gpio pins, KSZ9563 has four Led pins and two dedicated gpio pins. But in LAN937x dedicated gpio pins are removed instead there are up to 10 LED pins out of which LED_0 and LED_1 can be mapped to PTP tou 0, 1 or 2. This patch sets the bit 6 in 0x052C register and configure the LED override and source register for LAN937x series of switches alone. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-13net: dsa: microchip: ptp: lan937x: add 2 step timestampingArun Ramadoss
LAN937x series of switches support 2 step timestamping mechanism. There are timestamp correction calculation performed in ksz_rcv_timestamp and ksz_xmit_timestamp which are applicable only for p2p1step. To check whether the 2 step is enabled or not in tag_ksz.c introduced the helper function in taggger_data to query it from ksz_ptp.c. Based on whether 2 step is enabled or not, timestamp calculation are performed. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-13net: dsa: microchip: ptp: add support for perout programmable pinsArun Ramadoss
There are two programmable pins available for Trigger output unit to generate periodic pulses. This patch add verify_pin for the available 2 pins and configure it with respect to GPIO index for the TOU unit. Tested using testptp ./testptp -i 0 -L 0,2 ./testptp -i 0 -d /dev/ptp0 -p 1000000000 ./testptp -i 1 -L 1,2 ./testptp -i 1 -d /dev/ptp0 -p 100000000 Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-13net: dsa: microchip: ptp: add periodic output signalChristian Eggers
LAN937x and KSZ PTP supported switches has Three Trigger output unit. This TOU can used to generate the periodic signal for PTP. TOU has the cycle width register of 32 bit in size and period width register of 24 bit, each value is of 8ns so the pulse width can be maximum 125ms. Tested using ./testptp -d /dev/ptp0 -p 1000000000 -w 100000000 for generating the 10ms pulse width Signed-off-by: Christian Eggers <ceggers@arri.de> Co-developed-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-13net: dsa: microchip: ptp: move pdelay_rsp correction field to tail tagChristian Eggers
For PDelay_Resp messages we will likely have a negative value in the correction field. The switch hardware cannot correctly update such values (produces an off by one error in the UDP checksum), so it must be moved to the time stamp field in the tail tag. Format of the correction field is 48 bit ns + 16 bit fractional ns. After updating the correction field, clone is no longer required hence it is freed. Signed-off-by: Christian Eggers <ceggers@arri.de> Co-developed-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-13net: dsa: microchip: ptp: add packet transmission timestampingChristian Eggers
This patch adds the routines for transmission of ptp packets. When the ptp pdelay_req packet to be transmitted, it uses the deferred xmit worker to schedule the packets. During irq_setup, interrupt for Sync, Pdelay_req and Pdelay_rsp are enabled. So interrupt is triggered for all three packets. But for p2p1step, we require only time stamp of Pdelay_req packet. Hence to avoid posting of the completion from ISR routine for Sync and Pdelay_resp packets, ts_en flag is introduced. This controls which packets need to processed for timestamp. After the packet is transmitted, ISR is triggered. The time at which packet transmitted is recorded to separate register. This value is reconstructed to absolute time and posted to the user application through socket error queue. Signed-off-by: Christian Eggers <ceggers@arri.de> Co-developed-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-13net: dsa: microchip: ptp: add packet reception timestampingChristian Eggers
Rx Timestamping is done through 4 additional bytes in tail tag. Whenever the ptp packet is received, the 4 byte hardware time stamped value is added before 1 byte tail tag. Also, bit 7 in tail tag indicates it as PTP frame. This 4 byte value is extracted from the tail tag and reconstructed to absolute time and assigned to skb hwtstamp. If the packet received in PDelay_Resp, then partial ingress timestamp is subtracted from the correction field. Since user space tools expects to be done in hardware. Signed-off-by: Christian Eggers <ceggers@arri.de> Co-developed-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-13net: ptp: add helper for one-step P2P clocksChristian Eggers
For P2P delay measurement, the ingress time stamp of the PDelay_Req is required for the correction field of the PDelay_Resp. The application echoes back the correction field of the PDelay_Req when sending the PDelay_Resp. Some hardware (like the ZHAW InES PTP time stamping IP core) subtracts the ingress timestamp autonomously from the correction field, so that the hardware only needs to add the egress timestamp on tx. Other hardware (like the Microchip KSZ9563) reports the ingress time stamp via an interrupt and requires that the software provides this time stamp via tail-tag on tx. In order to avoid introducing a further application interface for this, the driver can simply emulate the behavior of the InES device and subtract the ingress time stamp in software from the correction field. On egress, the correction field can either be kept as it is (and the time stamp field in the tail-tag is set to zero) or move the value from the correction field back to the tail-tag. Changing the correction field requires updating the UDP checksum (if UDP is used as transport). Signed-off-by: Christian Eggers <ceggers@arri.de> Co-developed-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-13net: dsa: microchip: ptp: enable interrupt for timestampingArun Ramadoss
PTP Interrupt mask and status register differ from the global and port interrupt mechanism by two methods. One is that for global/port interrupt enabling we have to clear the bit but for ptp interrupt we have to set the bit. And other is bit12:0 is reserved in ptp interrupt registers. This forced to not use the generic implementation of global/port interrupt method routine. This patch implement the ptp interrupt mechanism to read the timestamp register for sync, pdelay_req and pdelay_resp. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-13net: dsa: microchip: ptp: manipulating absolute time using ptp hw clockChristian Eggers
This patch is used for reconstructing the absolute time from the 32bit hardware time stamping value. The do_aux ioctl is used for reading the ptp hardware clock and store it to global variable. The timestamped value in tail tag during rx and register during tx are 32 bit value (2 bit seconds and 30 bit nanoseconds). The time taken to read entire ptp clock will be time consuming. In order to speed up, the software clock is maintained. This clock time will be added to 32 bit timestamp to get the absolute time stamp. Signed-off-by: Christian Eggers <ceggers@arri.de> Co-developed-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-13net: dsa: microchip: ptp: add 4 bytes in tail tag when ptp enabledArun Ramadoss
When the PTP is enabled in hardware bit 6 of PTP_MSG_CONF1 register, the transmit frame needs additional 4 bytes before the tail tag. It is needed for all the transmission packets irrespective of PTP packets or not. The 4-byte timestamp field is 0 for frames other than Pdelay_Resp. For the one-step Pdelay_Resp, the switch needs the receive timestamp of the Pdelay_Req message so that it can put the turnaround time in the correction field. Since PTP has to be enabled for both Transmission and reception timestamping, driver needs to track of the tx and rx setting of the all the user ports in the switch. Two flags hw_tx_en and hw_rx_en are added in ksz_port to track the timestampping setting of each port. When any one of ports has tx or rx timestampping enabled, bit 6 of PTP_MSG_CONF1 is set and it is indicated to tag_ksz.c through tagger bytes. This flag adds 4 additional bytes to the tail tag. When tx and rx timestamping of all the ports are disabled, then 4 bytes are not added. Tested using hwstamp -i <interface> Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> # mostly api Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-13net: dsa: microchip: ptp: Initial hardware time stamping supportChristian Eggers
This patch adds the routine for get_ts_info, hwstamp_get, set. This enables the PTP support towards userspace applications such as linuxptp. Signed-off-by: Christian Eggers <ceggers@arri.de> Co-developed-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-13net: dsa: microchip: ptp: add the posix clock supportChristian Eggers
This patch implement routines (adjfine, adjtime, gettime and settime) for manipulating the chip's PTP clock. It registers the ptp caps to posix clock register. Signed-off-by: Christian Eggers <ceggers@arri.de> Co-developed-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> # mostly api Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-12ethtool: add netlink attr in rss get reply only if value is not nullSudheer Mogilappagari
Current code for RSS_GET ethtool command includes netlink attributes in reply message to user space even if they are null. Added checks to include netlink attribute in reply message only if a value is received from driver. Drivers might return null for RSS indirection table or hash key. Instead of including attributes with empty value in the reply message, add netlink attribute only if there is content. Fixes: 7112a04664bf ("ethtool: add netlink based get rss support") Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Link: https://lore.kernel.org/r/20230111235607.85509-1-sudheer.mogilappagari@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-12rxrpc: Fix wrong error return in rxrpc_connect_call()David Howells
Fix rxrpc_connect_call() to return -ENOMEM rather than 0 if it fails to look up a peer. This generated a smatch warning: net/rxrpc/call_object.c:303 rxrpc_connect_call() warn: missing error code 'ret' I think this also fixes a syzbot-found bug: rxrpc: Assertion failed - 1(0x1) == 11(0xb) is false ------------[ cut here ]------------ kernel BUG at net/rxrpc/call_object.c:645! where the call being put is in the wrong state - as would be the case if we failed to clear up correctly after the error in rxrpc_connect_call(). Fixes: 9d35d880e0e4 ("rxrpc: Move client call connection to the I/O thread") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <error27@gmail.com> Reported-and-tested-by: syzbot+4bb6356bb29d6299360e@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/r/202301111153.9eZRYLf1-lkp@intel.com/ Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Link: https://lore.kernel.org/r/2438405.1673460435@warthog.procyon.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-12Merge branch 'amd-xgbe-pfc-and-kr-training-fixes'Jakub Kicinski
Raju Rangoju says: ==================== amd-xgbe: PFC and KR-Training fixes This patch series fixes the issues in kr-training and pfc 0001 - There is difference in the TX Flow Control registers (TFCR) between the revisions of the hardware. Update the driver to use the TFCR based on the reported version of the hardware. 0002 - AN restart triggered during KR training not only aborts the KR training process but also move the HW to unstable state. Add the necessary changes to fix kr-taining. ==================== Link: https://lore.kernel.org/r/20230111172852.1875384-1-Raju.Rangoju@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-16 07:26:34 +0000