summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-10-25ARM: dts: stm32: relax qspi pins slew-rate for stm32mp157Patrice Chotard
Relax qspi pins slew-rate to minimize peak currents. Fixes: 844030057339 ("ARM: dts: stm32: add flash nor support on stm32mp157c eval board") Link: https://lore.kernel.org/r/20191025130122.11407-1-alexandre.torgue@st.com Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-10-23Merge tag 'arm-soc/for-5.5/maintainers' of ↵Olof Johansson
https://github.com/Broadcom/stblinux into arm/fixes This pull request contains MAINTAINERS file updates for Broadcom SoCs for the 5.5 kernel, please pull the following: - Simon adds a .mailmap alias for his old email - Stefan updates the existing BCM2835 with BCM2711 which is the chip name for the Raspberry Pi 4 - Florian removes Gregory and Brian from the MAINTAINERS file for BRCMSTB SoCs * tag 'arm-soc/for-5.5/maintainers' of https://github.com/Broadcom/stblinux: MAINTAINERS: Remove Gregory and Brian for ARCH_BRCMSTB mailmap: Add Simon Arlott (replacement for expired email address) MAINTAINERS: Add BCM2711 to BCM2835 ARCH Link: https://lore.kernel.org/r/20191023212814.30622-3-f.fainelli@gmail.com Signed-off-by: Olof Johansson <olof@lixom.net>
2019-10-23MAINTAINERS: Update the Spreadtrum SoC maintainerBaolin Wang
Change my email address, and add more Spreadtrum SC27xx series PMIC drivers to maintain. Link: https://lore.kernel.org/r/a48483d13243450ecf3b777d49e741b6367f2c6b.1571881956.git.baolin.wang@linaro.org Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-10-23MAINTAINERS: Remove Gregory and Brian for ARCH_BRCMSTBFlorian Fainelli
The last time Gregory and Brian did a review was sometime around 2015, since then, they have not been active for ARCH_BRCMSTB changes. Following the position of other maintainers and Harald Welte's position here: [1] http://laforge.gnumonks.org/blog/20180307-mchardy-gpl/ remove both of them. Acked-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2019-10-23Merge tag 'omap-for-v5.4/fixes-rc4-signed' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Three fixes for omaps for v5.4-rc cycle Two regression fixes for omap3 iommu. I missed applying two omap3 related iommu pdata quirks patches earlier because the kbuild test robot produced errors on them for missing dependencies. Fix ti-sysc interconnect target module driver handling for watchdog quirk. I must have tested this earlier only with watchdog service running, but clearly it does not do what it needs to do. * tag 'omap-for-v5.4/fixes-rc4-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: bus: ti-sysc: Fix watchdog quirk handling ARM: OMAP2+: Add pdata for OMAP3 ISP IOMMU ARM: OMAP2+: Plug in device_enable/idle ops for IOMMUs Link: https://lore.kernel.org/r/pull-1571848757-282222@atomide.com Signed-off-by: Olof Johansson <olof@lixom.net>
2019-10-23Merge tag 'sunxi-fixes-for-5.4-1' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes A number of fixes for this release, but mostly: - A fixup for the A10 CSI DT binding merged during the 5.4-rc1 window - A fix for a dt-binding error - Addition of phy regulator delays - The PMU on the A64 was found to be non-functional, so we've dropped it for now * tag 'sunxi-fixes-for-5.4-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: dts: sun7i: Drop the module clock from the device tree dt-bindings: media: sun4i-csi: Drop the module clock media: dt-bindings: Fix building error for dt_binding_check arm64: dts: allwinner: a64: sopine-baseboard: Add PHY regulator delay arm64: dts: allwinner: a64: Drop PMU node arm64: dts: allwinner: a64: pine64-plus: Add PHY regulator delay Link: https://lore.kernel.org/r/80085a57-c40f-4bed-a9c3-19858d87564e.lettre@localhost Signed-off-by: Olof Johansson <olof@lixom.net>
2019-10-21Merge tag 'arm-soc/for-5.4/devicetree-fixes-part2' of ↵Olof Johansson
https://github.com/Broadcom/stblinux into arm/fixes This pull request contains Broadcom ARM-based SoC Device Tree fixes for 5.4, please pull the following: - Stefan removes the activity LED node from the CM3 DTS since there is no driver for that LED yet and leds-gpio cannot drive it either * tag 'arm-soc/for-5.4/devicetree-fixes-part2' of https://github.com/Broadcom/stblinux: ARM: dts: bcm2837-rpi-cm3: Avoid leds-gpio probing issue Link: https://lore.kernel.org/r/20191021194302.21024-1-f.fainelli@gmail.com Signed-off-by: Olof Johansson <olof@lixom.net>
2019-10-21Merge tag 'arm-soc/for-5.4/devicetree-fixes' of ↵Olof Johansson
https://github.com/Broadcom/stblinux into arm/fixes This pull request contains Broadcom ARM-based SoCs Device Tree fixes for 5.4, please pull the following: - Stefan fixes the MMC controller bus-width property for the Raspberry Pi Zero Wireless which was incorrect after a prior refactoring * tag 'arm-soc/for-5.4/devicetree-fixes' of https://github.com/Broadcom/stblinux: ARM: dts: bcm2835-rpi-zero-w: Fix bus-width of sdhci Link: https://lore.kernel.org/r/20191015172356.9650-1-f.fainelli@gmail.com Signed-off-by: Olof Johansson <olof@lixom.net>
2019-10-21Merge tag 'davinci-fixes-for-v5.4' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into arm/fixes DaVinci fixes for v5.4 ====================== * fix GPIO backlight support on DA850 by enabling the needed config in davinci_all_defconfig. This is a fix because the driver and board support got converted to use BACKLIGHT_GPIO driver, but defconfig update is still missing in v5.4. * fix for McBSP DMA on DM365 * tag 'davinci-fixes-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: ARM: davinci_all_defconfig: enable GPIO backlight ARM: davinci: dm365: Fix McBSP dma_slave_map entry Link: https://lore.kernel.org/r/7f3393f9-59be-a2d4-c1e1-ba6e407681d1@ti.com Signed-off-by: Olof Johansson <olof@lixom.net>
2019-10-21Merge tag 'v5.4-rockchip-dtsfixes1' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes A number of fixes for individual boards like the rockpro64, and Hugsun X99 as well as a fix for the Gru-Kevin display override and fixing the dt- binding for Theobroma boards to the correct naming that is also actually used in the wild. * tag 'v5.4-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: Fix override mode for rk3399-kevin panel arm64: dts: rockchip: Fix usb-c on Hugsun X99 TV Box arm64: dts: rockchip: fix RockPro64 sdmmc settings arm64: dts: rockchip: fix RockPro64 sdhci settings arm64: dts: rockchip: fix RockPro64 vdd-log regulator settings dt-bindings: arm: rockchip: fix Theobroma-System board bindings arm64: dts: rockchip: fix Rockpro64 RK808 interrupt line Link: https://lore.kernel.org/r/1599050.HRXuSXmxRg@phil Signed-off-by: Olof Johansson <olof@lixom.net>
2019-10-21Merge tag 'imx-fixes-5.4' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.4: - Re-enable SNVS power key for imx6q-logicpd board which was accidentally disabled by a SoC level change. - Fix I2C switches on vf610-zii-scu4-aib board by specifying property i2c-mux-idle-disconnect. - A fix on imx-scu API that reads UID from firmware to avoid kernel NULL pointer dump. - A series from Anson to correct i.MX7 GPT and i.MX8 USDHC IPG clock. - A fix on DRM_MSM Kconfig regression on i.MX5 by adding the option explicitly into imx_v6_v7_defconfig. - Fix ARM regulator states issue for zii-ultra board, which is impacting stability of the board. - A correction on CPU core idle state name for LayerScape LX2160A SoC. * tag 'imx-fixes-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: imx_v6_v7_defconfig: Enable CONFIG_DRM_MSM arm64: dts: imx8mn: Use correct clock for usdhc's ipg clk arm64: dts: imx8mm: Use correct clock for usdhc's ipg clk arm64: dts: imx8mq: Use correct clock for usdhc's ipg clk ARM: dts: imx7s: Correct GPT's ipg clock source ARM: dts: vf610-zii-scu4-aib: Specify 'i2c-mux-idle-disconnect' ARM: dts: imx6q-logicpd: Re-Enable SNVS power key arm64: dts: lx2160a: Correct CPU core idle state name arm64: dts: zii-ultra: fix ARM regulator states soc: imx: imx-scu: Getting UID from SCU should have response Link: https://lore.kernel.org/r/20191017141851.GA22506@dragon Signed-off-by: Olof Johansson <olof@lixom.net>
2019-10-21Merge tag 'omap-for-v5.4/fixes-rc3-signed' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Fixes for omaps for v5.4-rc cycle More fixes for omap variants: - Update more panel options in omap2plus_defconfig that got changed as we moved to use generic LCD panels - Remove unused twl_keypad for logicpd-torpedo-som to avoid boot time warnings. This is only a cosmetic fix, but at least dmesg output is now getting more readable after all the fixes to remove pointless warnings - Fix gpu_cm node name as we still have a non-standard node name dependency for clocks. This should eventually get fixed by use of domain specific compatible property - Fix use of i2c-mux-idle-disconnect for m3874-iceboard - Use level interrupt for omap4 & 5 wlcore to avoid lost edge interrupts * tag 'omap-for-v5.4/fixes-rc3-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: Use level interrupt for omap4 & 5 wlcore ARM: dts: am3874-iceboard: Fix 'i2c-mux-idle-disconnect' usage ARM: dts: omap5: fix gpu_cm clock provider name ARM: dts: logicpd-torpedo-som: Remove twl_keypad ARM: omap2plus_defconfig: Fix selected panels after generic panel changes Link: https://lore.kernel.org/r/pull-1571242890-118432@atomide.com Signed-off-by: Olof Johansson <olof@lixom.net>
2019-10-21Merge tag 'arm-soc/for-5.4/devicetree-arm64-fixes' of ↵Olof Johansson
https://github.com/Broadcom/stblinux into arm/fixes This pull request contains Broadcom ARM64-based SoCs Device Tree fixes for 5.4, please pull the following: - Rayangonda fixes the GPIO pins assignment for the Stringray SoCs * tag 'arm-soc/for-5.4/devicetree-arm64-fixes' of https://github.com/Broadcom/stblinux: arm64: dts: Fix gpio to pinmux mapping Link: https://lore.kernel.org/r/20191015172356.9650-2-f.fainelli@gmail.com Signed-off-by: Olof Johansson <olof@lixom.net>
2019-10-18ARM: dts: bcm2837-rpi-cm3: Avoid leds-gpio probing issueStefan Wahren
bcm2835-rpi.dtsi defines the behavior of the ACT LED, which is available on all Raspberry Pi boards. But there is no driver for this particual GPIO on CM3 in mainline yet, so this node was left incomplete without the actual GPIO definition. Since commit 025bf37725f1 ("gpio: Fix return value mismatch of function gpiod_get_from_of_node()") this causing probe issues of the leds-gpio driver for users of the CM3 dtsi file. leds-gpio: probe of leds failed with error -2 Until we have the necessary GPIO driver hide the ACT node for CM3 to avoid this. Reported-by: Fredrik Yhlen <fredrik.yhlen@endian.se> Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Fixes: a54fe8a6cf66 ("ARM: dts: add Raspberry Pi Compute Module 3 and IO board") Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2019-10-18Merge branch 'watchdog-fix' into fixesTony Lindgren
2019-10-18bus: ti-sysc: Fix watchdog quirk handlingTony Lindgren
I noticed that when probed with ti-sysc, watchdog can trigger on am3, am4 and dra7 causing a device reset. Turns out I made several mistakes implementing the watchdog quirk handling: 1. We must do both writes to spr register 2. We must also call the reset quirk on disable 3. On am3 and am4 we need to also set swsup quirk flag I probably only tested this earlier with watchdog service running when the watchdog never gets disabled. Fixes: 4e23be473e30 ("bus: ti-sysc: Add support for module specific reset quirks") Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-10-18ARM: OMAP2+: Add pdata for OMAP3 ISP IOMMUSuman Anna
The OMAP3 ISP IOMMU does not have any reset lines, so it didn't need any pdata previously. The OMAP IOMMU driver now requires the platform data ops for device_enable/idle on all the IOMMU devices after commit db8918f61d51 ("iommu/omap: streamline enable/disable through runtime pm callbacks") to enable/disable the clocks properly and maintain the reference count and the omap_hwmod state machine. So, add these callbacks through iommu pdata quirks for the OMAP3 ISP IOMMU. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-10-18ARM: OMAP2+: Plug in device_enable/idle ops for IOMMUsSuman Anna
The OMAP IOMMU driver requires the device_enable/idle platform data ops on all the IOMMU devices to be able to enable and disable the clocks after commit db8918f61d51 ("iommu/omap: streamline enable/disable through runtime pm callbacks"). Plug in these pdata ops for all the existing IOMMUs through pdata quirks to maintain functionality. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-10-17ARM: davinci_all_defconfig: enable GPIO backlightBartosz Golaszewski
DA850 EVM has been converted to use GPIO backlight device for display backlight GPIO control. Enable the GPIO backlight module in davinci_all_defconfig to keep backlight support working. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> [nsekhar@ti.com: edits to commit message for context] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-10-17ARM: davinci: dm365: Fix McBSP dma_slave_map entryPeter Ujfalusi
dm365 have only single McBSP, so the device name is without .0 Fixes: 0c750e1fe481d ("ARM: davinci: dm365: Add dma_slave_map to edma") Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-10-16Merge tag 'tags/bcm2835-maintainers-next-2019-10-15' into maintainers/nextFlorian Fainelli
This pull request clarifies maintainership of the BCM2711 and adds a replacement mail address for a former contributor. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2019-10-15ARM: dts: bcm2835-rpi-zero-w: Fix bus-width of sdhciStefan Wahren
The commit e7774049ff25 ("ARM: dts: bcm283x: Define MMC interfaces at board level") accidently dropped the bus width for the sdhci on the RPi Zero W, because the board file was relying on the defaults from bcm2835-rpi.dtsi. So fix this performance regression by adding the bus width to the board file. Fixes: e7774049ff25 ("ARM: dts: bcm283x: Define MMC interfaces at board level") Reported-by: Phil Elwell <phil@raspberrypi.org> Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2019-10-14ARM: imx_v6_v7_defconfig: Enable CONFIG_DRM_MSMFabio Estevam
Since commit 2eba69071b4b ("drm/msm: Remove Kconfig default") the CONFIG_DRM_MSM option is no longer selected by default on i.MX5. Explicitly select CONFIG_DRM_MSM so that we can get GPU support by default on i.MX51 and i.MX53. Fixes: 2eba69071b4b ("drm/msm: Remove Kconfig default") Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-14arm64: dts: imx8mn: Use correct clock for usdhc's ipg clkAnson Huang
On i.MX8MN, usdhc's ipg clock is from IMX8MN_CLK_IPG_ROOT, assign it explicitly instead of using IMX8MN_CLK_DUMMY. Fixes: 6c3debcbae47 ("arm64: dts: freescale: Add i.MX8MN dtsi support") Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-14arm64: dts: imx8mm: Use correct clock for usdhc's ipg clkAnson Huang
On i.MX8MM, usdhc's ipg clock is from IMX8MM_CLK_IPG_ROOT, assign it explicitly instead of using IMX8MM_CLK_DUMMY. Fixes: a05ea40eb384 ("arm64: dts: imx: Add i.mx8mm dtsi support") Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-14arm64: dts: imx8mq: Use correct clock for usdhc's ipg clkAnson Huang
On i.MX8MQ, usdhc's ipg clock is from IMX8MQ_CLK_IPG_ROOT, assign it explicitly instead of using IMX8MQ_CLK_DUMMY. Fixes: 748f908cc882 ("arm64: add basic DTS for i.MX8MQ") Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-14ARM: dts: imx7s: Correct GPT's ipg clock sourceAnson Huang
i.MX7S/D's GPT ipg clock should be from GPT clock root and controlled by CCM's GPT CCGR, using correct clock source for GPT ipg clock instead of IMX7D_CLK_DUMMY. Fixes: 3ef79ca6bd1d ("ARM: dts: imx7d: use imx7s.dtsi as base device tree") Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-14ARM: dts: vf610-zii-scu4-aib: Specify 'i2c-mux-idle-disconnect'Andrey Smirnov
Specify 'i2c-mux-idle-disconnect' for both I2C switches present on the board, since both are connected to the same parent bus and all of their children have the same I2C address. Fixes: ca4b4d373fcc ("ARM: dts: vf610: Add ZII SCU4 AIB board") Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Chris Healy <cphealy@gmail.com> Cc: Cory Tusar <cory.tusar@zii.aero> Cc: Jeff White <jeff.white@zii.aero> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Tested-by: Chris Healy <cphealy@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-14ARM: dts: imx6q-logicpd: Re-Enable SNVS power keyAdam Ford
A previous patch disabled the SNVS power key by default which breaks the ability for the imx6q-logicpd board to wake from sleep. This patch re-enables this feature for this board. Fixes: 770856f0da5d ("ARM: dts: imx6qdl: Enable SNVS power key according to board design") Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-14arm64: dts: lx2160a: Correct CPU core idle state nameRan Wang
lx2160a support PW15 but not PW20, correct name to avoid confusing. Signed-off-by: Ran Wang <ran.wang_1@nxp.com> Fixes: 00c5ce8ac023 ("arm64: dts: lx2160a: add cpu idle support") Acked-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-12mailmap: Add Simon Arlott (replacement for expired email address)Simon Arlott
Add replacement email address for the one on my expired domain. Signed-off-by: Simon Arlott <simon@octiron.net> Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
2019-10-11Merge tag 'wlcore-fix' into fixesTony Lindgren
2019-10-11Merge tag 'mvebu-fixes-5.4-1' of git://git.infradead.org/linux-mvebu into ↵Olof Johansson
arm/fixes mvebu fixes for 5.4 (part 1) Fix regression on USB for Turris Mox (Armada 3720 based board) * tag 'mvebu-fixes-5.4-1' of git://git.infradead.org/linux-mvebu: arm64: dts: armada-3720-turris-mox: convert usb-phy to phy-supply Link: https://lore.kernel.org/r/87blunsm43.fsf@FE-laptop Signed-off-by: Olof Johansson <olof@lixom.net>
2019-10-10arm64: dts: rockchip: Fix override mode for rk3399-kevin panelDouglas Anderson
When I re-posted Sean's original commit to add the override mode for the kevin panel, for some reason I didn't notice that the pixel clock wasn't quite right. Looking at /sys/kernel/debug/clk/clk_summary on downstream kernels it can be seen that the VOP clock is supposed to be 266,666,667 Hz achieved by dividing the 800 MHz PLL by 3. Looking at history, it seems that even Sean's first patch [1] had this funny clock rate. I'm not sure where it came from since the commit message specifically mentioned 26666 kHz and the Chrome OS tree [2] can be seen to request 266667 kHz. In any case, let's fix it up. This together with my patch [3] to do the proper rounding when setting the clock rate makes the VOP clock more proper as seen in /sys/kernel/debug/clk/clk_summary. [1] https://lore.kernel.org/r/20180206165626.37692-4-seanpaul@chromium.org [2] https://chromium.googlesource.com/chromiumos/third_party/kernel/+/chromeos-4.4/drivers/gpu/drm/panel/panel-simple.c#1172 [3] https://lkml.kernel.org/r/20191003114726.v2.1.Ib233b3e706cf6317858384264d5b0ed35657456e@changeid Fixes: 84ebd2da6d04 ("arm64: dts: rockchip: Specify override mode for kevin panel") Cc: Sean Paul <seanpaul@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20191008124949.1.I674acd441997dd0690c86c9003743aacda1cf5dd@changeid Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-10-10arm64: dts: rockchip: Fix usb-c on Hugsun X99 TV BoxVivek Unune
Fix usb-c on X99 TV Box. Tested with armbian w/ kernel 5.3 Signed-off-by: Vivek Unune <npcomplete13@gmail.com> Link: https://lore.kernel.org/r/20190929032230.24628-1-npcomplete13@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-10-10arm64: dts: rockchip: fix RockPro64 sdmmc settingsSoeren Moch
According to the RockPro64 schematic [1] the rk3399 sdmmc controller is connected to a microSD (TF card) slot. Remove the cap-mmc-highspeed property of the sdmmc controller, since no mmc card can be connected here. [1] http://files.pine64.org/doc/rockpro64/rockpro64_v21-SCH.pdf Fixes: e4f3fb490967 ("arm64: dts: rockchip: add initial dts support for Rockpro64") Signed-off-by: Soeren Moch <smoch@web.de> Link: https://lore.kernel.org/r/20191004203213.4995-1-smoch@web.de Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-10-10MAINTAINERS: Add BCM2711 to BCM2835 ARCHStefan Wahren
Clarify that BCM2711 belongs to the BCM2835 ARCH. Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Acked-by: Eric Anholt <eric@anholt.net>
2019-10-09ARM: dts: Use level interrupt for omap4 & 5 wlcoreTony Lindgren
Commit 572cf7d7b07d ("ARM: dts: Improve omap l4per idling with wlcore edge sensitive interrupt") changed wlcore interrupts to use edge interrupt based on what's specified in the wl1835mod.pdf data sheet. However, there are still cases where we can have lost interrupts as described in omap_gpio_unidle(). And using a level interrupt instead of edge interrupt helps as we avoid the check for untriggered GPIO interrupts in omap_gpio_unidle(). And with commit e6818d29ea15 ("gpio: gpio-omap: configure edge detection for level IRQs for idle wakeup") GPIOs idle just fine with level interrupts. Let's change omap4 and 5 wlcore users back to using level interrupt instead of edge interrupt. Let's not change the others as I've only seen this on omap4 and 5, probably because the other SoCs don't have l4per idle independent of the CPUs. Fixes: 572cf7d7b07d ("ARM: dts: Improve omap l4per idling with wlcore edge sensitive interrupt") Depends-on: e6818d29ea15 ("gpio: gpio-omap: configure edge detection for level IRQs for idle wakeup") Cc: Anders Roxell <anders.roxell@linaro.org> Cc: Eyal Reizer <eyalr@ti.com> Cc: Guy Mishol <guym@ti.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-10-09arm64: dts: armada-3720-turris-mox: convert usb-phy to phy-supplyMarek Behún
Update Turris Mox device tree to use the phy-supply property of the generic PHY framework instead of the legacy usb-phy property. This is needed since it caused a regression on Turris Mox since "usb: host: xhci-plat: Prevent an abnormally restrictive PHY init skipping". Signed-off-by: Marek Behún <marek.behun@nic.cz> Fixes: eb6c2eb6c7fb ("usb: host: xhci-plat: Prevent an abnormally restrictive PHY init skipping") Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2019-10-08ARM: dts: am3874-iceboard: Fix 'i2c-mux-idle-disconnect' usageAndrey Smirnov
According to Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt, i2c-mux-idle-disconnect is a property of a parent node since it pertains to the mux/switch as a whole, so move it there and drop all of the concurrences in child nodes. Fixes: d031773169df ("ARM: dts: Adds device tree file for McGill's IceBoard, based on TI AM3874") Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Benoît Cousson <bcousson@baylibre.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Graeme Smecher <gsmecher@threespeedlogic.com> Cc: linux-omap@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Tested-by: Graeme Smecher <gsmecher@threespeedlogic.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-10-08ARM: dts: omap5: fix gpu_cm clock provider nameTero Kristo
The clkctrl code searches for the parent clockdomain based on the name of the CM provider node. The introduction of SGX node for omap5 made the node name for the gpu_cm to be clock-controller. There is no clockdomain named like this, so the lookup fails. Fix by changing the node name properly. Fixes: 394534cb07d8 ("ARM: dts: Configure sgx for omap5") Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-10-07ARM: dts: sun7i: Drop the module clock from the device treeMaxime Ripard
What we thought would be the module clock is actually the clock meant to be used by the sensors, and play no role in the CSI controller. Now that the binding has been updated to reflect that, let's update the device tree too. Fixes: d2b9c6444301 ("ARM: dts: sun7i: Add CSI0 controller") Reported-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <mripard@kernel.org>
2019-10-07dt-bindings: media: sun4i-csi: Drop the module clockMaxime Ripard
It turns out that what was thought to be the module clock was actually the clock meant to be used by the sensor, and isn't playing any role with the CSI controller itself. Let's drop that clock from our binding. Fixes: c5e8f4ccd775 ("media: dt-bindings: media: Add Allwinner A10 CSI binding") Reported-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <mripard@kernel.org>
2019-10-07media: dt-bindings: Fix building error for dt_binding_checkPragnesh Patel
$id doesn't match the actual filename, so update the $id Fixes: c5e8f4ccd7750 ("media: dt-bindings: media: Add Allwinner A10 CSI binding") Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Signed-off-by: Maxime Ripard <mripard@kernel.org>
2019-10-06arm64: dts: zii-ultra: fix ARM regulator statesLucas Stach
The GPIO controlled regulator for the ARM power supply is supplying the higher voltage when the GPIO is driven high. This is opposite to the similar regulator setup on the EVK board and is impacting stability of the board as the ARM domain has been supplied with a too low voltage when to faster OPPs are in use. Fixes: 4a13b3bec3b4 (arm64: dts: imx: add Zii Ultra board support) Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-06soc: imx: imx-scu: Getting UID from SCU should have responseAnson Huang
The SCU firmware API for getting UID should have response, otherwise, the message stored in function stack could be released and then the response data received from SCU will be stored into that released stack and cause kernel NULL pointer dump. Fixes: 73feb4d0f8f1 ("soc: imx-scu: Add SoC UID(unique identifier) support") Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-04arm64: dts: rockchip: fix RockPro64 sdhci settingsSoeren Moch
The RockPro64 schematics [1], [2] show that the rk3399 EMMC_STRB pin is connected to the RESET pin instead of the DATA_STROBE pin of the eMMC module. So the data strobe cannot be used for its intended purpose on this board, and so the HS400 eMMC mode is not functional. Limit the controller to HS200. [1] http://files.pine64.org/doc/rockpro64/rockpro64_v21-SCH.pdf [2] http://files.pine64.org/doc/rock64/PINE64_eMMC_Module_20170719.pdf Fixes: e4f3fb490967 ("arm64: dts: rockchip: add initial dts support for Rockpro64") Signed-off-by: Soeren Moch <smoch@web.de> Link: https://lore.kernel.org/r/20191003215036.15023-2-smoch@web.de Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-10-04arm64: dts: rockchip: fix RockPro64 vdd-log regulator settingsSoeren Moch
The RockPro64 schematic [1] page 18 states a min voltage of 0.8V and a max voltage of 1.4V for the VDD_LOG pwm regulator. However, there is an additional note that the pwm parameter needs to be modified. From the schematics a voltage range of 0.8V to 1.7V can be calculated. Additional voltage measurements on the board show that this fix indeed leads to the correct voltage, while without this fix the voltage was set too high. [1] http://files.pine64.org/doc/rockpro64/rockpro64_v21-SCH.pdf Fixes: e4f3fb490967 ("arm64: dts: rockchip: add initial dts support for Rockpro64") Signed-off-by: Soeren Moch <smoch@web.de> Link: https://lore.kernel.org/r/20191003215036.15023-1-smoch@web.de Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-10-04ARM: multi_v7_defconfig: Fix SPI_STM32_QSPI supportPatrice Chotard
SPI_STM32_QSPI must be set in buildin as rootfs can be located on QSPI memory device. Link: https://lore.kernel.org/r/20191004124025.17394-1-patrice.chotard@st.com Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-10-04ARM: dts: logicpd-torpedo-som: Remove twl_keypadAdam Ford
The TWL4030 used on the Logit PD Torpedo SOM does not have the keypad pins routed. This patch disables the twl_keypad driver to remove some splat during boot: twl4030_keypad 48070000.i2c:twl@48:keypad: missing or malformed property linux,keymap: -22 twl4030_keypad 48070000.i2c:twl@48:keypad: Failed to build keymap twl4030_keypad: probe of 48070000.i2c:twl@48:keypad failed with error -22 Signed-off-by: Adam Ford <aford173@gmail.com> [tony@atomide.com: removed error time stamps] Signed-off-by: Tony Lindgren <tony@atomide.com>
generated by cgit (git 2.34.1) at 2025-09-09 02:53:09 +0000