Age | Commit message (Collapse) | Author |
|
These two commits preallocated two per-cpu variables in
ip6_route_info_create() as fib_nh_common_init() and fib6_nh_init()
were expected to be called under RCU.
* commit d27b9c40dbd6 ("ipv6: Preallocate nhc_pcpu_rth_output in
ip6_route_info_create().")
* commit 5720a328c3e9 ("ipv6: Preallocate rt->fib6_nh->rt6i_pcpu in
ip6_route_info_create().")
Now these functions can be called without RCU and can use GFP_KERNEL.
Let's revert the commits.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250516022759.44392-8-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since commit c4837b9853e5 ("ipv6: Split ip6_route_info_create()."),
ip6_route_info_create_nh() uses GFP_ATOMIC as it was expected to be
called under RCU.
Now, we can call it without RCU and use GFP_KERNEL.
Let's pass gfp_flags to ip6_route_info_create_nh().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250516022759.44392-7-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 71c0efb6d12f ("ipv6: Factorise ip6_route_multipath_add().") split
a loop in ip6_route_multipath_add() so that we can put rcu_read_lock()
between ip6_route_info_create() and ip6_route_info_create_nh().
We no longer need to do so as ip6_route_info_create_nh() does not require
RCU now.
Let's revert the commit to simplify the code.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250516022759.44392-6-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
seg6local LWT setup"
The previous patch fixed the same issue mentioned in
commit 14a0087e7236 ("ipv6: sr: switch to GFP_ATOMIC
flag to allocate memory during seg6local LWT setup").
Let's revert it.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Link: https://patch.msgid.link/20250516022759.44392-5-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 169fd62799e8 ("ipv6: Get rid of RTNL for SIOCADDRT and
RTM_NEWROUTE.") added rcu_read_lock() covering
ip6_route_info_create_nh() and __ip6_ins_rt() to guarantee that
nexthop and netdev will not go away.
However, as reported by syzkaller [0], ip_tun_build_state() calls
dst_cache_init() with GFP_KERNEL during the RCU critical section.
ip6_route_info_create_nh() fetches nexthop or netdev depending on
whether RTA_NH_ID is set, and struct fib6_info holds a refcount
of either of them by nexthop_get() or netdev_get_by_index().
netdev_get_by_index() looks up a dev and calls dev_hold() under RCU.
So, we need RCU only around nexthop_find_by_id() and nexthop_get()
( and a few more nexthop code).
Let's add rcu_read_lock() there and remove rcu_read_lock() in
ip6_route_add() and ip6_route_multipath_add().
Now these functions called from fib6_add() need RCU:
- inet6_rt_notify()
- fib6_drop_pcpu_from() (via fib6_purge_rt())
- rt6_flush_exceptions() (via fib6_purge_rt())
- ip6_ignore_linkdown() (via rt6_multipath_rebalance())
All callers of inet6_rt_notify() need RCU, so rcu_read_lock() is
added there.
[0]:
[ BUG: Invalid wait context ]
6.15.0-rc4-syzkaller-00746-g836b313a14a3 #0 Tainted: G W
----------------------------
syz-executor234/5832 is trying to lock:
ffffffff8e021688 (pcpu_alloc_mutex){+.+.}-{4:4}, at:
pcpu_alloc_noprof+0x284/0x16b0 mm/percpu.c:1782
other info that might help us debug this:
context-{5:5}
1 lock held by syz-executor234/5832:
0: ffffffff8df3b860 (rcu_read_lock){....}-{1:3}, at: rcu_lock_acquire
include/linux/rcupdate.h:331 [inline]
0: ffffffff8df3b860 (rcu_read_lock){....}-{1:3}, at: rcu_read_lock
include/linux/rcupdate.h:841 [inline]
0: ffffffff8df3b860 (rcu_read_lock){....}-{1:3}, at:
ip6_route_add+0x4d/0x2f0 net/ipv6/route.c:3913
stack backtrace:
CPU: 0 UID: 0 PID: 5832 Comm: syz-executor234 Tainted: G W
6.15.0-rc4-syzkaller-00746-g836b313a14a3 #0 PREEMPT(full)
Tainted: [W]=WARN
Hardware name: Google Google Compute Engine/Google Compute Engine,
BIOS Google 04/29/2025
Call Trace:
<TASK>
dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120
print_lock_invalid_wait_context kernel/locking/lockdep.c:4831 [inline]
check_wait_context kernel/locking/lockdep.c:4903 [inline]
__lock_acquire+0xbcf/0xd20 kernel/locking/lockdep.c:5185
lock_acquire+0x120/0x360 kernel/locking/lockdep.c:5866
__mutex_lock_common kernel/locking/mutex.c:601 [inline]
__mutex_lock+0x182/0xe80 kernel/locking/mutex.c:746
pcpu_alloc_noprof+0x284/0x16b0 mm/percpu.c:1782
dst_cache_init+0x37/0xc0 net/core/dst_cache.c:145
ip_tun_build_state+0x193/0x6b0 net/ipv4/ip_tunnel_core.c:687
lwtunnel_build_state+0x381/0x4c0 net/core/lwtunnel.c:137
fib_nh_common_init+0x129/0x460 net/ipv4/fib_semantics.c:635
fib6_nh_init+0x15e4/0x2030 net/ipv6/route.c:3669
ip6_route_info_create_nh+0x139/0x870 net/ipv6/route.c:3866
ip6_route_add+0xf6/0x2f0 net/ipv6/route.c:3915
inet6_rtm_newroute+0x284/0x1c50 net/ipv6/route.c:5732
rtnetlink_rcv_msg+0x7cc/0xb70 net/core/rtnetlink.c:6955
netlink_rcv_skb+0x219/0x490 net/netlink/af_netlink.c:2534
netlink_unicast_kernel net/netlink/af_netlink.c:1313 [inline]
netlink_unicast+0x758/0x8d0 net/netlink/af_netlink.c:1339
netlink_sendmsg+0x805/0xb30 net/netlink/af_netlink.c:1883
sock_sendmsg_nosec net/socket.c:712 [inline]
__sock_sendmsg+0x219/0x270 net/socket.c:727
____sys_sendmsg+0x505/0x830 net/socket.c:2566
___sys_sendmsg+0x21f/0x2a0 net/socket.c:2620
__sys_sendmsg net/socket.c:2652 [inline]
__do_sys_sendmsg net/socket.c:2657 [inline]
__se_sys_sendmsg net/socket.c:2655 [inline]
__x64_sys_sendmsg+0x19b/0x260 net/socket.c:2655
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xf6/0x210 arch/x86/entry/syscall_64.c:94
Fixes: 169fd62799e8 ("ipv6: Get rid of RTNL for SIOCADDRT and RTM_NEWROUTE.")
Reported-by: syzbot+bcc12d6799364500fbec@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=bcc12d6799364500fbec
Reported-by: Eric Dumazet <edumazet@google.com>
Closes: https://lore.kernel.org/netdev/CANn89i+r1cGacVC_6n3-A-WSkAa_Nr+pmxJ7Gt+oP-P9by2aGw@mail.gmail.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250516022759.44392-4-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit f130a0cc1b4f ("inet: fix lwtunnel_valid_encap_type() lock
imbalance") added the rtnl_is_held argument as a temporary fix while
I'm converting nexthop and IPv6 routing table to per-netns RTNL or RCU.
Now all callers of lwtunnel_valid_encap_type() do not hold RTNL.
Let's remove the argument.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250516022759.44392-3-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Once allocated, the IPv6 routing table is not freed until
netns is dismantled.
fib6_get_table() uses rcu_read_lock() while iterating
net->ipv6.fib_table_hash[], but it's not needed and
rather confusing.
Because some callers have this pattern,
table = fib6_get_table();
rcu_read_lock();
/* ... use table here ... */
rcu_read_unlock();
[ See: addrconf_get_prefix_route(), ip6_route_del(),
rt6_get_route_info(), rt6_get_dflt_router() ]
and this looks illegal but is actually safe.
Let's remove rcu_read_lock() in fib6_get_table() and pass true
to the last argument of hlist_for_each_entry_rcu() to bypass
the RCU check.
Note that protection is not needed but RCU helper is used to
avoid data-race.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250516022759.44392-2-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Instances of 'struct target_opcode_descriptor' are not modified in this
driver.
Constifying this structure moves some data to a read-only section, so
increase overall security, especially when the structure holds some
function pointers.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
53602 19750 0 73352 11e88 drivers/target/target_core_spc.o
After:
=====
text data bss dec hex filename
58594 14758 0 73352 11e88 drivers/target/target_core_spc.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/889ee46e75db33e8ab997a627a1d3d651ad648db.1747592774.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Constify the first argument of the enabled() function in struct
target_opcode_descriptor.
This is the first step in order to constify struct
target_opcode_descriptor.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/4290cf1dbe100c1b1edf2ede5e5aef19b04ee7f2.1747592774.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
LKP reports below warning when building for RISC-V with randconfig
configuration.
drivers/scsi/hisi_sas/hisi_sas_v3_hw.c:4554:25: sparse:
sparse: incorrect type in argument 4 (different base types)
@@ expected restricted __le32 [usertype] *[assigned] ptr
@@ got unsigned int * @@
Type cast to fix this warning.
Fixes: 4ca7fe99fc84 ("scsi: hisi_sas: Use macro instead of magic number")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202505150705.k9ZzMxf1-lkp@intel.com/
Signed-off-by: Yihang Li <liyihang9@huawei.com>
Link: https://lore.kernel.org/r/20250515013504.3234016-1-liyihang9@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fix _ctl_get_mpt_mctp_passthru_adapter() to return the correct IOC
pointer to caller based on dev_index.
Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Link: https://lore.kernel.org/r/1747213781-31545-1-git-send-email-shivasharan.srikanteshwara@broadcom.com
Fixes: c72be4b5bb7c ("scsi: mpt3sas: Add support for MCTP Passthrough commands")
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
unregister_sysctl_table() checks for NULL pointers internally. Remove
unneeded NULL check here.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Link: https://lore.kernel.org/r/20250514032845.2317700-1-nichen@iscas.ac.cn
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
netdev_lock is already held when calling bnxt_ulp_irq_stop() and
bnxt_ulp_irq_restart(). When converting rtnl_lock to netdev_lock,
the original code was rtnl_dereference() to indicate that rtnl_lock
was already held. rcu_dereference_protected() is the correct
conversion after replacing rtnl_lock with netdev_lock.
Add a new helper netdev_lock_dereference() similar to
rtnl_dereference().
Fixes: 004b5008016a ("eth: bnxt: remove most dependencies on RTNL")
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250519204130.3097027-2-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After UFS_ABORT_TASK has been processed successfully, the host will
generate MCQ IRQ for ABORT TAG with response OCS_ABORTED. This results in
ufshcd_compl_one_cqe() calling ufshcd_release_scsi_cmd().
But ufshcd_mcq_abort() already calls ufshcd_release_scsi_cmd(), resulting
in __ufshcd_release() being called twice. This means
hba->clk_gating.active_reqs will be decreased twice, making it go
negative.
Delete ufshcd_release_scsi_cmd() in ufshcd_mcq_abort().
Fixes: f1304d442077 ("scsi: ufs: mcq: Added ufshcd_mcq_abort()")
Signed-off-by: ping.gao <ping.gao@samsung.com>
Link: https://lore.kernel.org/r/20250516083812.3894396-1-ping.gao@samsung.com
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Maintenance of the ravb driver will be handled by Niklas for now. I
still intend to review patches, and will be using my own email address
going forward.
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Acked-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://patch.msgid.link/20250519133354.6564-1-paul.barker.ct@bp.renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Zak Kemble says:
====================
net: bcmgenet: 64bit stats and expose more stats in ethtool
Hi, this patchset updates the bcmgenet driver with new 64bit statistics via
ndo_get_stats64 and rtnl_link_stats64, now reports hardware discarded
packets in the rx_missed_errors stat and exposes more stats in ethtool.
v1: https://lore.kernel.org/20250513144107.1989-1-zakkemble@gmail.com
v2: https://lore.kernel.org/20250515145142.1415-1-zakkemble@gmail.com
====================
Link: https://patch.msgid.link/20250519113257.1031-1-zakkemble@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Expose more per-queue and overall stats in ethtool
Signed-off-by: Zak Kemble <zakkemble@gmail.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250519113257.1031-4-zakkemble@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Hardware discarded packets are now counted in their own missed stat
instead of being lumped in with general errors.
Signed-off-by: Zak Kemble <zakkemble@gmail.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250519113257.1031-3-zakkemble@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Update the driver to use ndo_get_stats64, rtnl_link_stats64 and
u64_stats_t counters for statistics.
Signed-off-by: Zak Kemble <zakkemble@gmail.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250519113257.1031-2-zakkemble@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
While the MDIO address of the internal PHY on Allwinner sun8i chips is
generally 1, of_mdio_parse_addr is used to cleanly parse the address
from the device-tree instead of hardcoding it.
A commit reworking the code ditched the parsed value and hardcoded the
value 1 instead, which didn't really break anything but is more fragile
and not future-proof.
Restore the initial behavior using the parsed address returned from the
helper.
Fixes: 634db83b8265 ("net: stmmac: dwmac-sun8i: Handle integrated/external MDIOs")
Signed-off-by: Paul Kocialkowski <paulk@sys-base.io>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Corentin LABBE <clabbe.montjoie@gmail.com>
Tested-by: Corentin LABBE <clabbe.montjoie@gmail.com>
Link: https://patch.msgid.link/20250519164936.4172658-1-paulk@sys-base.io
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Document the UFS Controller on the SM8750 Platform.
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Signed-off-by: Melody Olvera <melody.olvera@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250327-sm8750_ufs_master-v3-1-bad1f5398d0a@oss.qualcomm.com
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Correct spelling mistakes of the SAS/SATA Vendor Specific Port Registers.
Fixed "Vednor" to "Vendor" in VSR_PHY_VS0 and VSR_PHY_VS1 comments. This
is a non-functional change aimed at improving code clarity.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Link: https://lore.kernel.org/r/20250517192422.310489-1-alok.a.tiwari@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2025-05-19 (ice, idpf)
For ice:
Jake removes incorrect incrementing of MAC filter count.
Dave adds check for, prerequisite, switchdev mode before setting up LAG.
For idpf:
Pavan stores max_tx_hdr_size to prevent NULL pointer dereference during
reset.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
idpf: fix null-ptr-deref in idpf_features_check
ice: Fix LACP bonds without SRIOV environment
ice: fix vf->num_mac count with port representors
====================
Link: https://patch.msgid.link/20250519210523.1866503-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use eth_zero_addr() to assign the zero address to the given address array
instead of memset() when second argument is address of zero.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Link: https://lore.kernel.org/r/20250519085457.918720-1-nichen@iscas.ac.cn
Reviewed-by: Karan Tilak Kumar <kartilak@cisco.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Heiner Kallweit says:
====================
net: phy: fixed_phy: simplifications and improvements
This series includes two types of changes:
- All callers pass PHY_POLL, therefore remove irq argument
- constify the passed struct fixed_phy_status *status
====================
Link: https://patch.msgid.link/4d4c468e-300d-42c7-92a1-eabbdb6be748@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Constify the passed struct fixed_phy_status *status where possible.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/d1764b62-8538-408b-a4e3-b63715481a38@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
All callers pass PHY_POLL, therefore remove irq argument from
fixed_phy_register().
Note: I keep the irq argument in fixed_phy_add_gpiod() for now,
for the case that somebody may want to use a GPIO interrupt in
the future, by e.g. adding a call to fwnode_irq_get() to
fixed_phy_get_gpiod().
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/31cdb232-a5e9-4997-a285-cb9a7d208124@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
All callers pass PHY_POLL, therefore remove irq argument from
fixed_phy_add().
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Acked-by: Greg Ungerer <gerg@linux-m68k.org>
Link: https://patch.msgid.link/b3b9b3bc-c310-4a54-b376-c909c83575de@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
AFAIU always returning -1 from lockdep's compare function
basically disables checking of dependencies between given
locks. Try to be a little more precise about what guarantees
that instance locks won't deadlock.
Right now we only nest them under protection of rtnl_lock.
Mostly in unregister_netdevice_many() and dev_close_many().
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250517200810.466531-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix "withouth" to "without"
Fix "instaces" to "instances"
Signed-off-by: Sumanth Gavini <sumanth.gavini@yahoo.com>
Reviewed-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Link: https://patch.msgid.link/20250517032535.1176351-1-sumanth.gavini@yahoo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix misspelling reported by codespell
Signed-off-by: Sumanth Gavini <sumanth.gavini@yahoo.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250517020003.1159640-1-sumanth.gavini@yahoo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cover three recent cases:
1. missing ops locking for the lowers during netdev_sync_lower_features
2. missing locking for dev_set_promiscuity (plus netdev_ops_assert_locked
with a comment on why/when it's needed)
3. rcu lock during team_change_rx_flags
Verified that each one triggers when the respective fix is reverted.
Not sure about the placement, but since it all relies on teaming,
added to the teaming directory.
One ugly bit is that I add NETIF_F_LRO to netdevsim; there is no way
to trigger netdev_sync_lower_features without it.
Signed-off-by: Stanislav Fomichev <stfomichev@gmail.com>
Link: https://patch.msgid.link/20250516232205.539266-1-stfomichev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Replace the pattern of calling and validating kzalloc then
fbnic_fw_init_cmpl with a single function, fbnic_fw_alloc_cmpl.
Signed-off-by: Lee Trager <lee@trager.us>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250516164804.741348-1-lee@trager.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Using random mac address is not an error since the driver continues to
function, it should be informative that the system has not assigned
a MAC address. This is inline with other drivers such as ax88796c,
dm9051 etc. Drop the error level to info level.
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://patch.msgid.link/20250516122655.442808-1-nm@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Sky Huang says:
====================
Add built-in 2.5G ethernet phy support on MT7988
From: Sky Huang <skylake.huang@mediatek.com>
This patchset adds support for built-in 2.5Gphy on MT7988, sort file
and config sequence in related Kconfig and Makefile.
====================
Link: https://patch.msgid.link/20250516102327.2014531-1-SkyLake.Huang@mediatek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for internal 2.5Gphy on MT7988. This driver will load
necessary firmware and add appropriate time delay to make sure
that firmware works stably. The firmware loading procedure takes
about 11ms in this driver.
Signed-off-by: Sky Huang <skylake.huang@mediatek.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250516102327.2014531-3-SkyLake.Huang@mediatek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Sort config and file names in Kconfig and Makefile in
drivers/net/phy/mediatek/ in alphabetical order.
Signed-off-by: Sky Huang <skylake.huang@mediatek.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250516102327.2014531-2-SkyLake.Huang@mediatek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Function __sctp_write_space() doesn't set poll key, which leads to
ep_poll_callback() waking up all waiters, not only these waiting
for the socket being writable. Set the key properly using
wake_up_interruptible_poll(), which is preferred over the sync
variant, as writers are not woken up before at least half of the
queue is available. Also, TCP does the same.
Signed-off-by: Petr Malat <oss@malat.biz>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20250516081727.1361451-1-oss@malat.biz
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
RTL8127-internal PHY is RTL8261C which is a integrated 10Gbps PHY with ID
0x001cc890. It follows the code path of RTL8125/RTL8126 internal NBase-T
PHY.
Signed-off-by: ChunHao Lin <hau@realtek.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250516055622.3772-1-hau@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The current implementation of per-pdev frequency range updates assumes that
each pdev supports only a single band. As a result in ath12k_regd_update(),
bands are handled using an if-else structure, which limits updates to only
one of the band per pdev. This assumption does not hold for all chipsets.
For example, the WCN7850 supports multiple bands within a single pdev.
Hence to accommodate such cases, update the logic to account for all band
cases by handling each band in a separate if conditions instead of the
previous if-else structure.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Fixes: 13324cecbb2c ("wifi: ath12k: Update frequency range if reg rules changes")
Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250520-fix_freq_range_update-v1-1-e061fd147b87@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
The function calls bitmap_empty() just before find_first_bit(). Both
functions are O(N). Because find_first_bit() returns >= nbits in case of
empty bitmap, the bitmap_empty() test may be avoided.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Acked-by: Christian Lamparter <chunkeey@gmail.com>
Link: https://patch.msgid.link/20250326155200.39895-1-yury.norov@gmail.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Fix the handling of err_wq_init and err_reg_netdev paths in
enetc4_pf_netdev_create() function.
Fixes: 6c5bafba347b ("net: enetc: add MAC filtering for i.MX95 ENETC PF")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250516052734.3624191-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Allow to inherit valid properties from the dsi-controller. This fixes the
following warning when adding a panel property:
rzg2lc.dtb: dsi@10850000: '#address-cells', '#size-cells', 'panel@0' do not
match any of the regexes: 'pinctrl-[0-9]+'
from schema $id:
http://devicetree.org/schemas/display/bridge/renesas,dsi.yaml#
Also add a panel property to the example.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250520151112.3278569-1-hugo@hugovil.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Add sgx,vz89te part number since it is similar to sgx,vz89x,
which is documented in trivial-devices.yaml.
Signed-off-by: Rodrigo Gobbi <rodrigo.gobbi.7@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250515000225.79239-1-rodrigo.gobbi.7@gmail.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Alan Maguire says:
====================
libbpf: support multi-split BTF
In discussing handling of inlines in BTF [1], one area which we may need
support for in the future is multiple split BTF, where split BTF sits
atop another split BTF which sits atop base BTF. This two-patch series
fixes one issue discovered when testing multi-split BTF and extends the
split BTF test to cover multi-split BTF also.
[1] https://lore.kernel.org/dwarves/20250416-btf_inline-v1-0-e4bd2f8adae5@meta.com/
====================
Link: https://patch.msgid.link/20250519165935.261614-1-alan.maguire@oracle.com
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
|
|
Extend split BTF test to cover case where we create split BTF on top of
existing split BTF and add info to it; ensure that such BTF can be
created and handled by searching within it, dumping/comparing to expected.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250519165935.261614-3-alan.maguire@oracle.com
|
|
libbpf handling of split BTF has been written largely with the
assumption that multiple splits are possible, i.e. split BTF on top of
split BTF on top of base BTF. One area where this does not quite work
is string handling in split BTF; the start string offset should be the
base BTF string section length + the base BTF string offset. This
worked in the past because for a single split BTF with base the start
string offset was always 0.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250519165935.261614-2-alan.maguire@oracle.com
|
|
As discussed in the thread containing
https://lore.kernel.org/linux-crypto/20250510053308.GB505731@sol/, the
Power10-optimized Poly1305 code is currently not safe to call in softirq
context. Disable it for now. It can be re-enabled once it is fixed.
Fixes: ba8f8624fde2 ("crypto: poly1305-p10 - Glue code for optmized Poly1305 implementation for ppc64le")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This reverts commit c66d7ebbe2fa14e41913adb421090a7426f59786.
Link: https://lore.kernel.org/all/02c22854-eebf-4ad1-b89e-8c2b65ab8236@csgroup.eu/
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Commit 3ef9f710efcb ("pinctrl: mediatek: Add EINT support for multiple
addresses") introduced an access to the 'soc' field of struct
mtk_pinctrl in mtk_eint_do_init() and for that an include of
pinctrl-mtk-common-v2.h.
However, pinctrl drivers relying on the v1 common driver include
pinctrl-mtk-common.h instead, which provides another definition of
struct mtk_pinctrl that does not contain an 'soc' field.
Since mtk_eint_do_init() can be called both by v1 and v2 drivers, it
will now try to dereference an invalid pointer when called on v1
platforms. This has been observed on Genio 350 EVK (MT8365), which
crashes very early in boot (the kernel trace can only be seen with
earlycon).
In order to fix this, since 'struct mtk_pinctrl' was only needed to get
a 'struct mtk_eint_pin', make 'struct mtk_eint_pin' a parameter
of mtk_eint_do_init() so that callers need to supply it, removing
mtk_eint_do_init()'s dependency on any particular 'struct mtk_pinctrl'.
Fixes: 3ef9f710efcb ("pinctrl: mediatek: Add EINT support for multiple addresses")
Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/20250520-genio-350-eint-null-ptr-deref-fix-v2-1-6a3ca966a7ba@collabora.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|