| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
idpf: add initial PTP support
Milena Olech says:
This patch series introduces support for Precision Time Protocol (PTP) to
Intel(R) Infrastructure Data Path Function (IDPF) driver. PTP feature is
supported when the PTP capability is negotiated with the Control
Plane (CP). IDPF creates a PTP clock and sets a set of supported
functions.
During the PTP initialization, IDPF requests a set of PTP capabilities
and receives a writeback from the CP with the set of supported options.
These options are:
- get time of the PTP clock
- set the time of the PTP clock
- adjust the PTP clock
- Tx timestamping
Each feature is considered to have direct access, where the operations
on PCIe BAR registers are allowed, or the mailbox access, where the
virtchnl messages are used to perform any PTP action. Mailbox access
means that PTP requests are sent to the CP through dedicated secondary
mailbox and the CP reads/writes/modifies desired resource - PTP Clock
or Tx timestamp registers.
Tx timestamp capabilities are negotiated only for vports that have
UPLINK_VPORT flag set by the CP. Capabilities provide information about
the number of available Tx timestamp latches, their indexes and size of
the Tx timestamp value. IDPF requests Tx timestamp by setting the
TSYN bit and the requested timestamp index in the context descriptor for
the PTP packets. When the completion tag for that packet is received,
IDPF schedules a worker to read the Tx timestamp value.
* '200GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
idpf: add support for Rx timestamping
idpf: add Tx timestamp flows
idpf: add Tx timestamp capabilities negotiation
idpf: add PTP clock configuration
idpf: add mailbox access to read PTP clock time
idpf: negotiate PTP capabilities and get PTP clock
idpf: move virtchnl structures to the header file
virtchnl: add PTP virtchnl definitions
idpf: add initial PTP support
idpf: change the method for mailbox workqueue allocation
====================
Link: https://patch.msgid.link/20250516170645.1172700-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If there is no stream data in file, v_len is zero.
So, If position(*pos) is zero, stream write will fail
due to stream write position validation check.
This patch reorganize stream write position validation.
Fixes: 0ca6df4f40cf ("ksmbd: prevent out-of-bounds stream writes by validating *pos")
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Multiple pointers in struct cifs_search_info (ntwrk_buf_start,
srch_entries_start, and last_entry) point to the same allocated buffer.
However, when freeing this buffer, only ntwrk_buf_start was set to NULL,
while the other pointers remained pointing to freed memory.
This is defensive programming to prevent potential issues with stale
pointers. While the active UAF vulnerability is fixed by the previous
patch, this change ensures consistent pointer state and more robust error
handling.
Signed-off-by: Wang Zhaolong <wangzhaolong1@huawei.com>
Cc: stable@vger.kernel.org
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Add function short descriptions to the kernel-doc where missing.
Correct a verb and add ending periods to sentences.
smackfs.c:1080: warning: missing initial short description on line:
* smk_net4addr_insert
smackfs.c:1343: warning: missing initial short description on line:
* smk_net6addr_insert
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Cc: linux-security-module@vger.kernel.org
Cc: Paul Moore <paul@paul-moore.com>
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
|
|
Fix misspelling reported by codespell
Signed-off-by: Sumanth Gavini <sumanth.gavini@yahoo.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250516225156.1122058-1-sumanth.gavini@yahoo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Seems like the extack cookie hasn't found any users outside
of wireless, which always uses nl_set_extack_cookie_u64().
Thus, allocating 20 bytes for it is pointless, reduce that
to 8 bytes, and add a BUILD_BUG_ON() to ensure it's enough
(obviously it is, for a u64, but in case it changes again.)
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250516115927.38209-2-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The USB-audio MIDI code initializes the timer, but in a rare case, the
driver might be freed without the disconnect call. This leaves the
timer in an active state while the assigned object is released via
snd_usbmidi_free(), which ends up with a kernel warning when the debug
configuration is enabled, as spotted by fuzzer.
For avoiding the problem, put timer_shutdown_sync() at
snd_usbmidi_free(), so that the timer can be killed properly.
While we're at it, replace the existing timer_delete_sync() at the
disconnect callback with timer_shutdown_sync(), too.
Reported-by: syzbot+d8f72178ab6783a7daea@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/681c70d7.050a0220.a19a9.00c6.GAE@google.com
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250519212031.14436-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
An unprivileged user is allowed to create an fanotify group and add
inode marks, but not filesystem, mntns and mount marks.
Add limited support for setting up filesystem, mntns and mount marks by
an unprivileged user under the following conditions:
1. User has CAP_SYS_ADMIN in the user ns where the group was created
2.a. User has CAP_SYS_ADMIN in the user ns where the sb was created
OR (in case setting up a mntns mark)
2.b. User has CAP_SYS_ADMIN in the user ns associated with the mntns
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20250516192803.838659-3-amir73il@gmail.com
|
|
FAN_UNLIMITED_QUEUE and FAN_UNLIMITED_MARK flags are already checked
as part of the CAP_SYS_ADMIN check for any FANOTIFY_ADMIN_INIT_FLAGS.
Remove the individual CAP_SYS_ADMIN checks for these flags.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20250516192803.838659-2-amir73il@gmail.com
|
|
One more PCI ID.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250519080855.16977-6-peter.ujfalusi@linux.intel.com
|
|
WCL uses the same receipt as PTL and PTL-H
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250519080855.16977-5-peter.ujfalusi@linux.intel.com
|
|
Clone PTL and adjust the number of cores from 5 to 3.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250519080855.16977-4-peter.ujfalusi@linux.intel.com
|
|
Add HDMI codec ID for Intel Wildcat Lake platform.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250519080855.16977-3-peter.ujfalusi@linux.intel.com
|
|
Add Wildcat Lake (WCL) audio Device ID.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Acked-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250519080855.16977-2-peter.ujfalusi@linux.intel.com
|
|
strcpy() is deprecated; use strscpy() instead.
Both the destination and source buffer are of fixed length
so strscpy with 2-arguments is used.
Link: https://github.com/KSPP/linux/issues/88
Signed-off-by: Siddarth Gundu <siddarthsgml@gmail.com>
Link: https://patch.msgid.link/20250519194833.106463-1-siddarthsgml@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The calls to css_rstat_init() occur at different places depending on the
context. Document the conditions that determine which point of
initialization is used.
Signed-off-by: JP Kobryn <inwardvessel@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
There are a few places where a conditional check is performed to validate a
given css on its rstat participation. This new helper tries to make the
code more readable where this check is performed.
Signed-off-by: JP Kobryn <inwardvessel@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
It is possible to eliminate contention between subsystems when
updating/flushing stats by using subsystem-specific locks. Let the existing
rstat locks be dedicated to the cgroup base stats and rename them to
reflect that. Add similar locks to the cgroup_subsys struct for use with
individual subsystems.
Lock initialization is done in the new function ss_rstat_init(ss) which
replaces cgroup_rstat_boot(void). If NULL is passed to this function, the
global base stat locks will be initialized. Otherwise, the subsystem locks
will be initialized.
Change the existing lock helper functions to accept a reference to a css.
Then within these functions, conditionally select the appropriate locks
based on the subsystem affiliation of the given css. Add helper functions
for this selection routine to avoid repeated code.
Signed-off-by: JP Kobryn <inwardvessel@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Different subsystems may call cgroup_rstat_updated() within the same
cgroup, resulting in a tree of pending updates from multiple subsystems.
When one of these subsystems is flushed via cgroup_rstat_flushed(), all
other subsystems with pending updates on the tree will also be flushed.
Change the paradigm of having a single rstat tree for all subsystems to
having separate trees for each subsystem. This separation allows for
subsystems to perform flushes without the side effects of other subsystems.
As an example, flushing the cpu stats will no longer cause the memory stats
to be flushed and vice versa.
In order to achieve subsystem-specific trees, change the tree node type
from cgroup to cgroup_subsys_state pointer. Then remove those pointers from
the cgroup and instead place them on the css. Finally, change update/flush
functions to make use of the different node type (css). These changes allow
a specific subsystem to be associated with an update or flush. Separate
rstat trees will now exist for each unique subsystem.
Since updating/flushing will now be done at the subsystem level, there is
no longer a need to keep track of updated css nodes at the cgroup level.
The list management of these nodes done within the cgroup (rstat_css_list
and related) has been removed accordingly.
Conditional guards for checking validity of a given css were placed within
css_rstat_updated/flush() to prevent undefined behavior occuring from kfunc
usage in bpf programs. Guards were also placed within css_rstat_init/exit()
in order to help consolidate calls to them. At call sites for all four
functions, the existing guards were removed.
Signed-off-by: JP Kobryn <inwardvessel@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Remove hard-coded strings by using the str_read_write() helper.
Signed-off-by: Feng Wei <feng.wei8@zte.com.cn>
Signed-off-by: Shao Mingyin <shao.mingyin@zte.com.cn>
Link: https://lore.kernel.org/r/20250401192603311H5OxuFmUSbPc4VnQQkhZr@zte.com.cn
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
thunderx enables its PCI device with pcim_enable_device(). This,
implicitly, switches the function pci_request_regions() into managed
mode, where it becomes a devres function.
The PCI subsystem wants to remove this hybrid nature from its
interfaces. To do so, users of the aforementioned combination of
functions must be ported to non-hybrid functions.
Replace the call to sometimes-managed pci_request_regions() with one to
the always-managed pcim_request_all_regions().
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20250417082511.22272-3-phasta@kernel.org
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
ismt enables its PCI device with pcim_enable_device(). This,
implicitly, switches the function pci_request_region() into managed
mode, where it becomes a devres function.
The PCI subsystem wants to remove this hybrid nature from its
interfaces. To do so, users of the aforementioned combination of
functions must be ported to non-hybrid functions.
Replace the call to sometimes-managed pci_request_region() with one to
the always-managed pcim_request_region().
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20250417082511.22272-2-phasta@kernel.org
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
The driver do support I2C_M_IGNORE_NAK, so add
I2C_FUNC_PROTOCOL_MANGLING to the feature list.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Acked-by: Mukesh Kumar Savaliya <quic_msavaliy@quicinc.com>
Link: https://lore.kernel.org/r/20250326-i2c-v1-1-82409ebe9f2b@gmail.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Document I2C controllers integrated in RK3528, which are compatible with
the RK3399 variant.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250417120118.17610-4-ziyao@disroot.org
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Some SMBus controllers may restrict writes to addresses where SPD sensors
may reside. This may lead to some SPD sensors not functioning correctly,
and might need extra handling. Introduce new SPD-instantiating functions
that are aware of this, and use them instead.
Signed-off-by: Yo-Jung Lin (Leo) <leo.lin@canonical.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250430-for-upstream-i801-spd5118-no-instantiate-v2-1-2f54d91ae2c7@canonical.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Document support for the I2C Bus Interface (RIIC) found on the Renesas
RZ/V2N (R9A09G056) SoC. The RIIC IP is identical to that on RZ/V2H(P),
so `renesas,riic-r9a09g057` will be used as a fallback compatible,
enabling reuse of the existing driver without changes.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20250501203310.140137-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Implement I2C bus recovery support for the RIIC controller by making use
of software-controlled SCL and SDA line manipulation. The controller allows
forcing SCL and SDA levels through control bits, which enables generation
of manual clock pulses and a stop condition to free a stuck bus.
This implementation wires up the bus recovery mechanism using
i2c_generic_scl_recovery and provides get/set operations for SCL and SDA.
This allows the RIIC driver to recover from bus hang scenarios where SDA
is held low by a slave.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Link: https://lore.kernel.org/r/20250501204003.141134-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Add compatible string for Sophgo SG2044 SoC I2C controller which can be
used specifically for the SG2044 SoC.
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250413223507.46480-9-inochiama@gmail.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Each vendor have an items entry of its own compatible, It is needless
and some can be merged as it share the same base "snps,designware-i2c"
compatible.
Merge the duplicate compatible entry into one item entry.
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250413223507.46480-2-inochiama@gmail.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
For SMBUS block read, do not continue to read if the message length
passed from the device is '0' or greater than the maximum allowed bytes.
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20250424053320.19211-1-akhilrajeev@nvidia.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
This ensures we get all information we need to debug issues when users
forward us their logs.
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Link: https://lore.kernel.org/r/20250427-pasemi-fixes-v3-4-af28568296c0@svenpeter.dev
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Add handling for all the missing error condition, and better recovery in
pasemi_smb_clear().
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
Co-developed-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Link: https://lore.kernel.org/r/20250427-pasemi-fixes-v3-3-af28568296c0@svenpeter.dev
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
The hardware (supposedly) has a 25ms timeout for clock stretching
and the driver uses 100ms which should be plenty.
The interrupt path however misses handling for errors while waiting for
the completion and the polling path uses an open-coded readx_poll_timeout.
Note that we drop reg_write(smbus, REG_SMSTA, status) while fixing those
issues here which will be done anyway whenever the next transaction starts
via pasemi_smb_clear.
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Link: https://lore.kernel.org/r/20250427-pasemi-fixes-v3-2-af28568296c0@svenpeter.dev
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
The I2C bus can get stuck under some conditions (desync between
controller and device). The pasemi controllers include an unjam feature
that is enabled on reset, but was being disabled by the driver. Keep it
enabled by explicitly setting the UJM bit in the CTL register. This
should help recover the bus from certain conditions, which would
otherwise remain stuck forever.
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Link: https://lore.kernel.org/r/20250427-pasemi-fixes-v3-1-af28568296c0@svenpeter.dev
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
True is true when greater than '0', no need for double negation
inside the if statement.
Link: https://lore.kernel.org/r/20250418211635.2666234-11-andi.shyti@kernel.org
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
If the xfer fails, it indicates a real error. Log it with an
error message instead of a debug message to reflect its severity.
Link: https://lore.kernel.org/r/20250418211635.2666234-10-andi.shyti@kernel.org
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Shuffle a bit the code in order to avoid prototypes.
Link: https://lore.kernel.org/r/20250426201920.272135-1-andi.shyti@kernel.org
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Adjust the indentation of the bcm_iproc_i2c_slave_init() function
definition to match standard kernel coding style. Don't end the
line with an open parenthesis.
Link: https://lore.kernel.org/r/20250418211635.2666234-8-andi.shyti@kernel.org
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Replace udelay(100) with usleep_range(100, 200) as recommended
by kernel documentation. The delay is not in atomic context, so
busy-waiting is unnecessary.
Also update the comment for clarity.
Link: https://lore.kernel.org/r/20250418211635.2666234-7-andi.shyti@kernel.org
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Drop an unnecessary blank line in bcm_iproc_i2c_slave_isr().
Link: https://lore.kernel.org/r/20250418211635.2666234-6-andi.shyti@kernel.org
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Alignment should match the open parenthesis but in some places it
didn't
Link: https://lore.kernel.org/r/20250418211635.2666234-5-andi.shyti@kernel.org
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
In the kernel u32 should be used instead of unit32_t.
Link: https://lore.kernel.org/r/20250418211635.2666234-4-andi.shyti@kernel.org
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Use dev_err_probe() instead of dev_err() and then return.
Link: https://lore.kernel.org/r/20250418211635.2666234-3-andi.shyti@kernel.org
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
The 'ret' variable doesn't need to be initialised, as it is
always assigned before use.
While here, reorder the variable declarations in reverse
Christmas tree style, by line length.
Link: https://lore.kernel.org/r/20250418211635.2666234-2-andi.shyti@kernel.org
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
The camera sensor is connected via ISP I2C bus in AMD SOC
architectures. Add new I2C designware driver to support
new camera sensors on AMD HW.
Co-developed-by: Venkata Narendra Kumar Gutta <vengutta@amd.com>
Signed-off-by: Venkata Narendra Kumar Gutta <vengutta@amd.com>
Co-developed-by: Bin Du <bin.du@amd.com>
Signed-off-by: Bin Du <bin.du@amd.com>
Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250424184952.1290019-1-pratap.nirujogi@amd.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Add support for the MediaTek Dimensity 1200 (MT6893) SoC; this
chip's multiple I2C controller instances are fully compatible
with the ones found in the MT8192 SoC.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250416120303.148017-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Add functions to perform block read and write operations. This applies
for cases where the requested operation is for >8 bytes of data.
When not using the block mode transfer, the driver will attempt a series
of 8 byte i2c operations until it reaches the desired total. For
example, for a 40 byte request the driver will complete 5 separate
transactions. This results in large transactions taking a significant
amount of time to process.
Add block mode such that the driver can request larger transactions, up
to 1024 bytes per transfer.
Many aspects of the block mode transfer is common with the regular 8
byte operations. Use generic functions for parts of the message
construction and sending the message. The key difference for the block
mode is the usage of separate FIFO buffer to store data.
Write to this buffer in the case of a write (before command send).
Read from this buffer in the case of a read (after command send).
Data is written into this buffer by placing data into the MSB onwards.
This means the bottom 8 bits of the data will match the top 8 bits, and
so on and so forth.
Set specific bits in message for block mode, enable block mode transfers
from global i2c management registers, construct message, send message,
read or write from FIFO buffer as required.
The block-mode transactions result in a significant speed increase in
large i2c requests.
Signed-off-by: Aryan Srivastava <aryan.srivastava@alliedtelesis.co.nz>
Link: https://lore.kernel.org/r/20250324192946.3078712-2-aryan.srivastava@alliedtelesis.co.nz
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
No functional changes.
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Link: https://lore.kernel.org/r/20250415-pasemi-fixes-v2-2-c543bf53151a@svenpeter.dev
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
When changing the #defines to use BIT and GENMASK the bitfield.h include
was added instead of the correct bits.h include.
Reported-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Link: https://lore.kernel.org/r/20250415-pasemi-fixes-v2-1-c543bf53151a@svenpeter.dev
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
When we use constants in a time or frequency related contexts,
it's better to utilise the respective definitions that have
encoded units in them. This will make code better to read and
understand.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: Mukesh Kumar Savaliya <quic_msavaliy@quicinc.com>
Link: https://lore.kernel.org/r/20250416101702.2128740-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
