| Age | Commit message (Collapse) | Author |
|---|
|
This makes the name consistent with both other x1e80100 devices and the
dictionary. A UCM fix was merged already and is required in order for
sound to work after this commit.
Signed-off-by: Maya Matuszczyk <maccraft123mc@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241019190214.3337-2-maccraft123mc@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Allowing these GDSCs to collapse makes the QMP combo PHYs lose their
configuration on machine suspend. Currently, the QMP combo PHY driver
doesn't reinitialise the HW on resume. Under such conditions, the USB
SuperSpeed support is broken. To avoid this, mark the pwrsts flags with
RET_ON. This has been already done for USB 0 and 1 SS PHY GDSCs,
Do this also for the USB MP SS1 PHY GDSC config. The USB MP SS0 PHY GDSC
already has it.
Fixes: 161b7c401f4b ("clk: qcom: Add Global Clock controller (GCC) driver for X1E80100")
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20241021-x1e80100-clk-gcc-fix-usb-mp-phy-gdsc-pwrsts-flags-v2-1-0bfd64556238@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The memory barriers in list_del_init_careful() and list_empty_careful()
in pairs already handle the proper ordering between data.got_token
and data.wq.entry. So remove the redundant explicit barriers. And also
change a "break" statement to "return" to avoid redundant calling of
finish_wait().
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Link: https://lore.kernel.org/r/20241021085251.73353-1-songmuchun@bytedance.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Commit 15c7fab0e047 ("ASoC: qcom: Move Soundwire runtime stream alloc to
soundcards") moved the allocation of Soundwire stream runtime from the
Qualcomm Soundwire driver to each individual machine sound card driver,
except that it forgot to update SC7280 card.
Just like for other Qualcomm sound cards using Soundwire, the card
driver should allocate and release the runtime. Otherwise sound
playback will result in a NULL pointer dereference or other effect of
uninitialized memory accesses (which was confirmed on SDM845 having
similar issue).
Cc: stable@vger.kernel.org
Cc: Alexey Klimov <alexey.klimov@linaro.org>
Cc: Steev Klimaszewski <steev@kali.org>
Fixes: 15c7fab0e047 ("ASoC: qcom: Move Soundwire runtime stream alloc to soundcards")
Link: https://lore.kernel.org/r/20241010054109.16938-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20241012101108.129476-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In bpf_parse_param(), keep the value of param->string intact so it can
be freed later. Otherwise, the kmalloc area pointed to by param->string
will be leaked as shown below:
unreferenced object 0xffff888118c46d20 (size 8):
comm "new_name", pid 12109, jiffies 4295580214
hex dump (first 8 bytes):
61 6e 79 00 38 c9 5c 7e any.8.\~
backtrace (crc e1b7f876):
[<00000000c6848ac7>] kmemleak_alloc+0x4b/0x80
[<00000000de9f7d00>] __kmalloc_node_track_caller_noprof+0x36e/0x4a0
[<000000003e29b886>] memdup_user+0x32/0xa0
[<0000000007248326>] strndup_user+0x46/0x60
[<0000000035b3dd29>] __x64_sys_fsconfig+0x368/0x3d0
[<0000000018657927>] x64_sys_call+0xff/0x9f0
[<00000000c0cabc95>] do_syscall_64+0x3b/0xc0
[<000000002f331597>] entry_SYSCALL_64_after_hwframe+0x4b/0x53
Fixes: 6c1752e0b6ca ("bpf: Support symbolic BPF FS delegation mount options")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20241022130133.3798232-1-houtao@huaweicloud.com
|
|
During boot, users sometimes observe the following warning:
[7.841431] WARNING: CPU: 4 PID: 492 at
drivers/interconnect/core.c:685 __icc_enable
(drivers/interconnect/core.c:685 (discriminator 7))
[..]
[7.841541] Call trace:
[7.841542] __icc_enable (drivers/interconnect/core.c:685 (discriminator 7))
[7.841545] icc_disable (drivers/interconnect/core.c:708)
[7.841547] geni_icc_disable (drivers/soc/qcom/qcom-geni-se.c:862)
[7.841553] spi_geni_runtime_suspend+0x3c/0x4c spi_geni_qcom
This occurs when the spi-geni driver receives an -EPROBE_DEFER error
from spi_geni_grab_gpi_chan(), causing devres to start releasing all
resources as shown below:
[7.138679] geni_spi 880000.spi: DEVRES REL ffff800081443800 devm_icc_release (8 bytes)
[7.138751] geni_spi 880000.spi: DEVRES REL ffff800081443800 devm_icc_release (8 bytes)
[7.138827] geni_spi 880000.spi: DEVRES REL ffff800081443800 pm_runtime_disable_action (16 bytes)
[7.139494] geni_spi 880000.spi: DEVRES REL ffff800081443800 devm_pm_opp_config_release (16 bytes)
[7.139512] geni_spi 880000.spi: DEVRES REL ffff800081443800 devm_spi_release_controller (8 bytes)
[7.139516] geni_spi 880000.spi: DEVRES REL ffff800081443800 devm_clk_release (16 bytes)
[7.139519] geni_spi 880000.spi: DEVRES REL ffff800081443800 devm_ioremap_release (8 bytes)
[7.139524] geni_spi 880000.spi: DEVRES REL ffff800081443800 devm_region_release (24 bytes)
[7.139527] geni_spi 880000.spi: DEVRES REL ffff800081443800 devm_kzalloc_release (22 bytes)
[7.139530] geni_spi 880000.spi: DEVRES REL ffff800081443800 devm_pinctrl_release (8 bytes)
[7.139539] geni_spi 880000.spi: DEVRES REL ffff800081443800 devm_kzalloc_release (40 bytes)
The issue here is that pm_runtime_disable_action() results in a call to
spi_geni_runtime_suspend(), which attempts to suspend the device and
disable an interconnect path that devm_icc_release() has just released.
Resolve this by calling geni_icc_get() before enabling runtime PM. This
approach ensures that when devres releases resources in reverse order,
it will start with pm_runtime_disable_action(), suspending the device,
and then proceed to free the remaining resources.
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Closes: https://lore.kernel.org/r/CA+G9fYtsjFtddG8i+k-SpV8U6okL0p4zpsTiwGfNH5GUA8dWAA@mail.gmail.com
Fixes: 89e362c883c6 ("spi: geni-qcom: Undo runtime PM changes at driver exit time")
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Link: https://patch.msgid.link/20241008231615.430073-1-djakov@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Clarify the distinction between filesystem variables (mandatory)
and all others (optional).
For optional variables, explain the difference between unset variables
(no access check performed) and empty variables (nothing allowed for
lists of allowed paths/ports, or no effect for lists of scopes).
List the known LL_SCOPED values and their effect.
Signed-off-by: Matthieu Buffet <matthieu@buffet.re>
Link: https://lore.kernel.org/r/20241019151534.1400605-4-matthieu@buffet.re
[mic: Add a missing colon]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
Help message is getting larger with each new supported feature (scopes,
and soon UDP). Also the large number of calls to fprintf with
environment variables make it hard to read. Refactor it away into a
single simpler constant format string.
Signed-off-by: Matthieu Buffet <matthieu@buffet.re>
Link: https://lore.kernel.org/r/20241019151534.1400605-3-matthieu@buffet.re
[mic: Move the small cleanups in the next commit]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
If you want to specify that no port can be bind()ed, you would think
(looking quickly at both help message and code) that setting
LL_TCP_BIND="" would do it.
However the code splits on ":" then applies atoi(), which does not allow
checking for errors. Passing an empty string returns 0, which is
interpreted as "allow bind(0)", which means bind to any ephemeral port.
This bug occurs whenever passing an empty string or when leaving a
trailing/leading colon, making it impossible to completely deny bind().
To reproduce:
export LL_FS_RO="/" LL_FS_RW="" LL_TCP_BIND=""
./sandboxer strace -e bind nc -n -vvv -l -p 0
Executing the sandboxed command...
bind(3, {sa_family=AF_INET, sin_port=htons(0),
sin_addr=inet_addr("0.0.0.0")}, 16) = 0
Listening on 0.0.0.0 37629
Use strtoull(3) instead, which allows error checking. Check that the
entire string has been parsed correctly without overflows/underflows,
but not that the __u64 (the type of struct landlock_net_port_attr.port)
is a valid __u16 port: that is already done by the kernel.
Fixes: 5e990dcef12e ("samples/landlock: Support TCP restrictions")
Signed-off-by: Matthieu Buffet <matthieu@buffet.re>
Link: https://lore.kernel.org/r/20241019151534.1400605-2-matthieu@buffet.re
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
The ATL will fail early if the DF register access fails due to missing
PCI IDs in the amd_nb code. There aren't any clear indicators on why the
ATL will fail to load in this case.
Add a couple of debug print statements to highlight reasons for failure.
A common scenario is missing support for new hardware. If the ATL fails
to load on a system, and there is interest to support it, then dynamic
debugging can be enabled to help find the cause for failure. If there is
no interest in supporting ATL on a new system, then these failures will
be silent.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20241021152158.2525669-1-yazen.ghannam@amd.com
|
|
On some platforms, for example i.MX93, there is only one
audio PLL source, so some sample rate can't be supported.
If the PLL source is used for 8kHz series rates, then 11kHz
series rates can't be supported.
So add constraints according to the frequency of available
clock sources, then alsa-lib will help to convert the
unsupported rate for the driver.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/1728884313-6778-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The BlueField EDAC driver supports the first generation BlueField-1 SoC, but
not the second generation BlueField-2 SoC. The BlueField-2 SoC is different in
that only secure accesses are allowed to the External Memory Interface (EMI)
register block. On BlueField-2, all read/write accesses from Linux to EMI
registers are routed via the Arm Secure Monitor Call (SMC) through Arm Trusted
Firmware (ATF), which runs at EL3 privileged state.
On BlueField-1, EMI registers are mapped and accessed directly. In order to
support BlueField-2, the driver's read and write access methods must be
extended with additional logic to include secure access to the EMI registers
via SMCs.
[ bp: Move struct member comments above them, simplify. ]
Signed-off-by: David Thompson <davthompson@nvidia.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shravan Kumar Ramani <shravankr@nvidia.com>
Link: https://lore.kernel.org/r/20241021233013.18405-1-davthompson@nvidia.com
|
|
The number of CNS bits in the command is specific to the nvme spec
version compliance. The existing check is not sufficient for possible
CNS values the driver uses that may create confusion between host and
device, so enhance the check to consider the version and desired CNS
value.
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
This function should've been split a long time ago because it is used in
two paths:
1) On the late loading path, when the microcode is loaded through the
request_firmware interface
2) In the save_microcode_in_initrd() path which collects all the
microcode patches which are relevant for the current system before
the initrd with the microcode container has been jettisoned.
In that path, it is not really necessary to iterate over the nodes on
a system and match a patch however it didn't cause any trouble so it
was left for a later cleanup
However, that later cleanup was expedited by the fact that Jens was
enabling "Use L3 as a NUMA node" in the BIOS setting in his machine and
so this causes the NUMA CPU masks used in cpumask_of_node() to be
generated *after* 2) above happened on the first node. Which means, all
those masks were funky, wrong, uninitialized and whatnot, leading to
explosions when dereffing c->microcode in load_microcode_amd().
So split that function and do only the necessary work needed at each
stage.
Fixes: 94838d230a6c ("x86/microcode/AMD: Use the family,model,stepping encoded in the patch ID")
Reported-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/91194406-3fdf-4e38-9838-d334af538f74@kernel.dk
|
|
MAXAG is a legitimate value for bmp->db_numag
Fixes: e63866a47556 ("jfs: fix out-of-bounds in dbNextAG() and diAlloc()")
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
|
|
Commit in Fixes changed how a microcode patch is loaded on Zen and newer but
the patch matching needs to happen with different rigidity, depending on what
is being done:
1) When the patch is added to the patches cache, the stepping must be ignored
because the driver still supports different steppings per system
2) When the patch is matched for loading, then the stepping must be taken into
account because each CPU needs the patch matching its exact stepping
Take care of that by making the matching smarter.
Fixes: 94838d230a6c ("x86/microcode/AMD: Use the family,model,stepping encoded in the patch ID")
Reported-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/91194406-3fdf-4e38-9838-d334af538f74@kernel.dk
|
|
Command implementations shouldn't be directly looking into io_uring_cmd
to carve free space. Use an io_uring helper, which will also do build
time size sanitisation.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Merge in block/fs prep patches for the atomic write support.
* for-6.13/block-atomic:
block: Add bdev atomic write limits helpers
fs/block: Check for IOCB_DIRECT in generic_atomic_write_valid()
block/fs: Pass an iocb to generic_atomic_write_valid()
|
|
When a process migrates to another cgroup and the original cgroup is deleted,
the restrictions of throttled bios cannot be removed. If the restrictions
are set too low, it will take a long time to complete these bios.
Refer to the process of deleting a disk to remove the restrictions and
issue bios when deleting the cgroup.
This makes difference on the behavior of throttled bios:
Before: the limit of the throttled bios can't be changed and the bios will
complete under this limit;
Now: the limit will be canceled and the throttled bios will be flushed
immediately.
References:
[1] https://lore.kernel.org/r/20220318130144.1066064-4-ming.lei@redhat.com
[2] https://lore.kernel.org/all/da861d63-58c6-3ca0-2535-9089993e9e28@huaweicloud.com/
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20240817071108.1919729-1-lilingfeng@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Supposing first scenario with a virtio_blk driver.
CPU0 CPU1
blk_mq_try_issue_directly()
__blk_mq_issue_directly()
q->mq_ops->queue_rq()
virtio_queue_rq()
blk_mq_stop_hw_queue()
virtblk_done()
blk_mq_request_bypass_insert() 1) store
blk_mq_start_stopped_hw_queue()
clear_bit(BLK_MQ_S_STOPPED) 3) store
blk_mq_run_hw_queue()
if (!blk_mq_hctx_has_pending()) 4) load
return
blk_mq_sched_dispatch_requests()
blk_mq_run_hw_queue()
if (!blk_mq_hctx_has_pending())
return
blk_mq_sched_dispatch_requests()
if (blk_mq_hctx_stopped()) 2) load
return
__blk_mq_sched_dispatch_requests()
Supposing another scenario.
CPU0 CPU1
blk_mq_requeue_work()
blk_mq_insert_request() 1) store
virtblk_done()
blk_mq_start_stopped_hw_queue()
blk_mq_run_hw_queues() clear_bit(BLK_MQ_S_STOPPED) 3) store
blk_mq_run_hw_queue()
if (!blk_mq_hctx_has_pending()) 4) load
return
blk_mq_sched_dispatch_requests()
if (blk_mq_hctx_stopped()) 2) load
continue
blk_mq_run_hw_queue()
Both scenarios are similar, the full memory barrier should be inserted
between 1) and 2), as well as between 3) and 4) to make sure that either
CPU0 sees BLK_MQ_S_STOPPED is cleared or CPU1 sees dispatch list.
Otherwise, either CPU will not rerun the hardware queue causing
starvation of the request.
The easy way to fix it is to add the essential full memory barrier into
helper of blk_mq_hctx_stopped(). In order to not affect the fast path
(hardware queue is not stopped most of the time), we only insert the
barrier into the slow path. Actually, only slow path needs to care about
missing of dispatching the request to the low-level device driver.
Fixes: 320ae51feed5 ("blk-mq: new multi-queue block IO queueing mechanism")
Cc: stable@vger.kernel.org
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20241014092934.53630-4-songmuchun@bytedance.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Supposing the following scenario.
CPU0 CPU1
blk_mq_insert_request() 1) store
blk_mq_unquiesce_queue()
blk_queue_flag_clear() 3) store
blk_mq_run_hw_queues()
blk_mq_run_hw_queue()
if (!blk_mq_hctx_has_pending()) 4) load
return
blk_mq_run_hw_queue()
if (blk_queue_quiesced()) 2) load
return
blk_mq_sched_dispatch_requests()
The full memory barrier should be inserted between 1) and 2), as well as
between 3) and 4) to make sure that either CPU0 sees QUEUE_FLAG_QUIESCED
is cleared or CPU1 sees dispatch list or setting of bitmap of software
queue. Otherwise, either CPU will not rerun the hardware queue causing
starvation.
So the first solution is to 1) add a pair of memory barrier to fix the
problem, another solution is to 2) use hctx->queue->queue_lock to
synchronize QUEUE_FLAG_QUIESCED. Here, we chose 2) to fix it since
memory barrier is not easy to be maintained.
Fixes: f4560ffe8cec ("blk-mq: use QUEUE_FLAG_QUIESCED to quiesce queue")
Cc: stable@vger.kernel.org
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20241014092934.53630-3-songmuchun@bytedance.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Supposing the following scenario with a virtio_blk driver.
CPU0 CPU1 CPU2
blk_mq_try_issue_directly()
__blk_mq_issue_directly()
q->mq_ops->queue_rq()
virtio_queue_rq()
blk_mq_stop_hw_queue()
virtblk_done()
blk_mq_try_issue_directly()
if (blk_mq_hctx_stopped())
blk_mq_request_bypass_insert() blk_mq_run_hw_queue()
blk_mq_run_hw_queue() blk_mq_run_hw_queue()
blk_mq_insert_request()
return
After CPU0 has marked the queue as stopped, CPU1 will see the queue is
stopped. But before CPU1 puts the request on the dispatch list, CPU2
receives the interrupt of completion of request, so it will run the
hardware queue and marks the queue as non-stopped. Meanwhile, CPU1 also
runs the same hardware queue. After both CPU1 and CPU2 complete
blk_mq_run_hw_queue(), CPU1 just puts the request to the same hardware
queue and returns. It misses dispatching a request. Fix it by running
the hardware queue explicitly. And blk_mq_request_issue_directly()
should handle a similar situation. Fix it as well.
Fixes: d964f04a8fde ("blk-mq: fix direct issue")
Cc: stable@vger.kernel.org
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20241014092934.53630-2-songmuchun@bytedance.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This reverts commit 5b7048b89745c3c5fb4b3080fb7bced61dba2a2b.
The main purpose of this patch is cleanup.
The throtl_adjusted_limit function was removed after
commit bf20ab538c81 ("blk-throttle: remove
CONFIG_BLK_DEV_THROTTLING_LOW"), so the problem of not being
able to scale after setting bps or iops to 1 will not occur.
So revert this commit that bps/iops can be set to 1.
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Xiuhong Wang <xiuhong.wang@unisoc.com>
Signed-off-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20241016024508.3340330-1-xiuhong.wang@unisoc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Since SLOB was removed and since
commit 6c6c47b063b5 ("mm, slab: call kvfree_rcu_barrier() from kmem_cache_destroy()"),
it is not necessary to use call_rcu when the callback only performs
kmem_cache_free. Use kfree_rcu() directly.
The changes were made using Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Link: https://lore.kernel.org/r/20241013201704.49576-10-Julia.Lawall@inria.fr
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
After a SED drive is provisioned, there is no way to change the SID
password via the ioctl() interface. A new ioctl IOC_OPAL_SET_SID_PW
will allow the password to be changed. The valid current password is
required.
Signed-off-by: Greg Joyce <gjoyce@linux.ibm.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Link: https://lore.kernel.org/r/20240829175639.6478-2-gjoyce@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20241007182419.3263186-6-ushankar@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
ublk currently supports the following behaviors on ublk server exit:
A: outstanding I/Os get errors, subsequently issued I/Os get errors
B: outstanding I/Os get errors, subsequently issued I/Os queue
C: outstanding I/Os get reissued, subsequently issued I/Os queue
and the following behaviors for recovery of preexisting block devices by
a future incarnation of the ublk server:
1: ublk devices stopped on ublk server exit (no recovery possible)
2: ublk devices are recoverable using start/end_recovery commands
The userspace interface allows selection of combinations of these
behaviors using flags specified at device creation time, namely:
default behavior: A + 1
UBLK_F_USER_RECOVERY: B + 2
UBLK_F_USER_RECOVERY|UBLK_F_USER_RECOVERY_REISSUE: C + 2
The behavior A + 2 is currently unsupported. Add support for this
behavior under the new flag combination
UBLK_F_USER_RECOVERY|UBLK_F_USER_RECOVERY_FAIL_IO.
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20241007182419.3263186-5-ushankar@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Save some lines by merging stop_work and quiesce_work into nosrv_work,
which looks at the recovery flags and does the right thing when the "no
ublk server" condition is detected.
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20241007182419.3263186-4-ushankar@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
ublk currently supports the following behaviors on ublk server exit:
A: outstanding I/Os get errors, subsequently issued I/Os get errors
B: outstanding I/Os get errors, subsequently issued I/Os queue
C: outstanding I/Os get reissued, subsequently issued I/Os queue
and the following behaviors for recovery of preexisting block devices by
a future incarnation of the ublk server:
1: ublk devices stopped on ublk server exit (no recovery possible)
2: ublk devices are recoverable using start/end_recovery commands
The userspace interface allows selection of combinations of these
behaviors using flags specified at device creation time, namely:
default behavior: A + 1
UBLK_F_USER_RECOVERY: B + 2
UBLK_F_USER_RECOVERY|UBLK_F_USER_RECOVERY_REISSUE: C + 2
We can't easily change the userspace interface to allow independent
selection of one of {A, B, C} and one of {1, 2}, but we can refactor the
internal helpers which test for the flags. Replace the existing helpers
with the following set:
ublk_nosrv_should_reissue_outstanding: tests for behavior C
ublk_nosrv_[dev_]should_queue_io: tests for behavior B
ublk_nosrv_should_stop_dev: tests for behavior 1
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20241007182419.3263186-3-ushankar@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Setting UBLK_F_USER_RECOVERY_REISSUE without also setting
UBLK_F_USER_RECOVERY is currently silently equivalent to not setting any
recovery flags at all, even though that's obviously not intended. Check
for this case and fail add_dev (with a paranoid warning to aid debugging
any program which might rely on the old behavior) with EINVAL if it is
detected.
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20241007182419.3263186-2-ushankar@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Applications using the passthrough interfaces for IO want to continue
seeing the disk stats. These requests had been fenced off from this
block layer feature. While the block layer doesn't necessarily know what
a passthrough command does, we do know the data size and direction,
which is enough to account for the command's stats.
Since tracking these has the potential to produce unexpected results,
the passthrough stats are locked behind a new queue flag that needs to
be enabled with the /sys/block/<dev>/queue/iostats_passthrough
attribute.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241007153236.2818562-1-kbusch@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Requesting a module either succeeds or does nothing, return an error from
this method does not make sense.
Also move the load_module after the store method in the struct
declaration to keep the important show and store methods together.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20241008050841.104602-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Both most common formats have uuid in addition to partition name:
GPT: standard uuid xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
DOS: 4 byte disk signature and 1 byte partition xxxxxxxx-xx
Tools from util-linux use the same notation for them.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Reviewed-by: Kyle Fortin <kyle.fortin@oracle.com>
[dianders: rebased to modern kernels]
Signed-off-by: Douglas Anderson <dianders@google.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241004171340.v2.1.I938c91d10e454e841fdf5d64499a8ae8514dc004@changeid
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
It's known needed at that point, and it's cleaner to just assign it
there rather than rely on it being reliably set before hitting the
IO accounting. Hence, move it out of blk_mq_rq_time_init(), which is
now only doing the allocation side timing.
While at it, get rid of the '0' time passing to blk_mq_rq_time_init(),
just pass in blk_time_get_ns() for the two cases where 0 is being
explicitly passed in. The rest pass in the previously cached allocation
time.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
A previous commit moved RQF_IO_STAT into blk_account_io_done(), where
it's being set rather than at allocation time. Unfortunately we do check
for that flag in blk_mq_rq_time_init(), and hence setting the
start_time_ns wasn't being done. This lead to unwieldy inflight IO counts
and times, as IO completion accounting would a 0 value rather than the
issue time for it's subtraction math.
Fix this by switching the blk_mq_rq_time_init() check to use the queue
state rather than the request state.
Fixes: b8f762400ae8 ("block: move iostat check into blk_acount_io_start()")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202410062110.512391df-oliver.sang@intel.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Document support for defining a partition table in the mmc-card node.
This is needed if the eMMC doesn't have a partition table written and
the bootloader of the device load data by using absolute offset of the
block device. This is common on embedded device that have eMMC installed
to save space and have non removable block devices.
If an OF partition table is detected, any partition table written in the
eMMC will be ignored and won't be parsed.
eMMC provide a generic disk for user data and if supported (JEDEC 4.4+)
also provide two additional disk ("boot1" and "boot2") for special usage
of boot operation where normally is stored the bootloader or boot info.
New JEDEC version also supports up to 4 GP partition for other usage
called "gp1", "gp2", "gp3", "gp4".
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20241002221306.4403-7-ansuelsmth@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add support for partition table defined in Device Tree. Similar to how
it's done with MTD, add support for defining a fixed partition table in
device tree.
A common scenario for this is fixed block (eMMC) embedded devices that
have no MBR or GPT partition table to save storage space. Bootloader
access the block device with absolute address of data.
This is to complete the functionality with an equivalent implementation
with providing partition table with bootargs, for case where the booargs
can't be modified and tweaking the Device Tree is the only solution to
have an usabe partition table.
The implementation follow the fixed-partitions parser used on MTD
devices where a "partitions" node is expected to be declared with
"fixed-partitions" compatible in the OF node of the disk device
(mmc-card for eMMC for example) and each child node declare a label
and a reg with offset and size. If label is not declared, the node name
is used as fallback. Eventually is also possible to declare the read-only
property to flag the partition as read-only.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241002221306.4403-6-ansuelsmth@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Attach partitions fwnode if found in mmc-card and register disk with it.
This permits block partition to reference the node and register a
partition table defined in DT for the special case for embedded device
that doesn't have a partition table flashed but have an hardcoded
partition table passed from the system.
JEDEC BOOT partition boot0/boot1 are supported but in DT we refer with
the JEDEC name of boot1 and boot2 to better adhere to documentation.
Also JEDEC GP partition gp0/1/2/3 are supported but in DT we refer with
the JEDEC name of gp1/2/3/4 to better adhere to documentration.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20241002221306.4403-5-ansuelsmth@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Introduce add_disk_fwnode() as a replacement of device_add_disk() that
permits to pass and attach a fwnode to disk dev.
This variant can be useful for eMMC that might have the partition table
for the disk defined in DT. A parser can later make use of the attached
fwnode to parse the related table and init the hardcoded partition for
the disk.
device_add_disk() is converted to a simple wrapper of add_disk_fwnode()
with the fwnode entry set as NULL.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241002221306.4403-4-ansuelsmth@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Document support for read-only partition in cmdline partition for block
devices by appending "ro" after the (partition name).
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20241002221306.4403-3-ansuelsmth@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add support for defining read-only partitions and complete support for
it in the cmdline partition parser as the additional "ro" after a
partition is scanned but never actually applied.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241002221306.4403-2-ansuelsmth@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
It's now just checking whether or not RQF_IO_STAT is set, so let's get
rid of it and just open-code the specific flag that is being checked.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If RQF_IO_STAT is set, then accounting is enabled. There's no need to
further gate this on req->part being set or not, RQF_IO_STAT should
never be set if accounting is not being done for this request.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Simply checking the rq_flags is enough to determine if accounting is
being done for this request.
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Rather than have blk_do_io_stat() check for both RQF_IO_STAT and whether
the request is a passthrough requests every time, move both of those
checks into blk_account_io_start(). Then blk_do_io_stat() can be reduced
to just checking for RQF_IO_STAT.
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The ret may be zero in btrfs_search_dir_index_item() and should not
passed to ERR_PTR(). Now btrfs_unlink_subvol() is the only caller to
this, reconstructed it to check ERR_PTR(-ENOENT) while ret >= 0.
This fixes smatch warnings:
fs/btrfs/dir-item.c:353
btrfs_search_dir_index_item() warn: passing zero to 'ERR_PTR'
Fixes: 9dcbe16fccbb ("btrfs: use btrfs_for_each_slot in btrfs_search_dir_index_item")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[BUG]
Syzbot reports the following crash:
BTRFS info (device loop0 state MCS): disabling free space tree
BTRFS info (device loop0 state MCS): clearing compat-ro feature flag for FREE_SPACE_TREE (0x1)
BTRFS info (device loop0 state MCS): clearing compat-ro feature flag for FREE_SPACE_TREE_VALID (0x2)
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000003: 0000 [#1] PREEMPT SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f]
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
RIP: 0010:backup_super_roots fs/btrfs/disk-io.c:1691 [inline]
RIP: 0010:write_all_supers+0x97a/0x40f0 fs/btrfs/disk-io.c:4041
Call Trace:
<TASK>
btrfs_commit_transaction+0x1eae/0x3740 fs/btrfs/transaction.c:2530
btrfs_delete_free_space_tree+0x383/0x730 fs/btrfs/free-space-tree.c:1312
btrfs_start_pre_rw_mount+0xf28/0x1300 fs/btrfs/disk-io.c:3012
btrfs_remount_rw fs/btrfs/super.c:1309 [inline]
btrfs_reconfigure+0xae6/0x2d40 fs/btrfs/super.c:1534
btrfs_reconfigure_for_mount fs/btrfs/super.c:2020 [inline]
btrfs_get_tree_subvol fs/btrfs/super.c:2079 [inline]
btrfs_get_tree+0x918/0x1920 fs/btrfs/super.c:2115
vfs_get_tree+0x90/0x2b0 fs/super.c:1800
do_new_mount+0x2be/0xb40 fs/namespace.c:3472
do_mount fs/namespace.c:3812 [inline]
__do_sys_mount fs/namespace.c:4020 [inline]
__se_sys_mount+0x2d6/0x3c0 fs/namespace.c:3997
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
[CAUSE]
To support mounting different subvolume with different RO/RW flags for
the new mount APIs, btrfs introduced two workaround to support this feature:
- Skip mount option/feature checks if we are mounting a different
subvolume
- Reconfigure the fs to RW if the initial mount is RO
Combining these two, we can have the following sequence:
- Mount the fs ro,rescue=all,clear_cache,space_cache=v1
rescue=all will mark the fs as hard read-only, so no v2 cache clearing
will happen.
- Mount a subvolume rw of the same fs.
We go into btrfs_get_tree_subvol(), but fc_mount() returns EBUSY
because our new fc is RW, different from the original fs.
Now we enter btrfs_reconfigure_for_mount(), which switches the RO flag
first so that we can grab the existing fs_info.
Then we reconfigure the fs to RW.
- During reconfiguration, option/features check is skipped
This means we will restart the v2 cache clearing, and convert back to
v1 cache.
This will trigger fs writes, and since the original fs has "rescue=all"
option, it skips the csum tree read.
And eventually causing NULL pointer dereference in super block
writeback.
[FIX]
For reconfiguration caused by different subvolume RO/RW flags, ensure we
always run btrfs_check_options() to ensure we have proper hard RO
requirements met.
In fact the function btrfs_check_options() doesn't really do many
complex checks, but hard RO requirement and some feature dependency
checks, thus there is no special reason not to do the check for mount
reconfiguration.
Reported-by: syzbot+56360f93efa90ff15870@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-btrfs/0000000000008c5d090621cb2770@google.com/
Fixes: f044b318675f ("btrfs: handle the ro->rw transition for mounting different subvolumes")
CC: stable@vger.kernel.org # 6.8+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
In debugging some corrupt squashfs files, we observed symptoms of
corrupt page cache pages but correct on-disk contents. Further
investigation revealed that the exact symptom was a correct page
followed by an incorrect, duplicate, page. This got us thinking about
extent maps.
commit ac05ca913e9f ("Btrfs: fix race between using extent maps and merging them")
enforces a reference count on the primary `em` extent_map being merged,
as that one gets modified.
However, since,
commit 3d2ac9922465 ("btrfs: introduce new members for extent_map")
both 'em' and 'merge' get modified, which started modifying 'merge'
and thus introduced the same race.
We were able to reproduce this by looping the affected squashfs workload
in parallel on a bunch of separate btrfs-es while also dropping caches.
We are still working on a simple enough reproducer to make into an fstest.
The simplest fix is to stop modifying 'merge', which is not essential,
as it is dropped immediately after the merge. This behavior is simply
a consequence of the order of the two extent maps being important in
computing the new values. Modify merge_ondisk_extents to take prev and
next by const* and also take a third merged parameter that it puts the
results in. Note that this introduces the rather odd behavior of passing
'em' to merge_ondisk_extents as a const * and as a regular ptr.
Fixes: 3d2ac9922465 ("btrfs: introduce new members for extent_map")
CC: stable@vger.kernel.org # 6.11+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Inside lock_delalloc_folios(), there are several problems related to
sector size < page size handling:
- Set the writer locks without checking if the folio is still valid
We call btrfs_folio_start_writer_lock() just like it's folio_lock().
But since the folio may not even be the folio of the current mapping,
we can easily screw up the folio->private.
- The range is not clamped inside the page
This means we can over write other bitmaps if the start/len is not
properly handled, and trigger the btrfs_subpage_assert().
- @processed_end is always rounded up to page end
If the delalloc range is not page aligned, and we need to retry
(returning -EAGAIN), then we will unlock to the page end.
Thankfully this is not a huge problem, as now
btrfs_folio_end_writer_lock() can handle range larger than the locked
range, and only unlock what is already locked.
Fix all these problems by:
- Lock and check the folio first, then call
btrfs_folio_set_writer_lock()
So that if we got a folio not belonging to the inode, we won't
touch folio->private.
- Properly truncate the range inside the page
- Update @processed_end to the locked range end
Fixes: 1e1de38792e0 ("btrfs: make process_one_page() to handle subpage locking")
CC: stable@vger.kernel.org # 6.1+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Since commit 011b46c30476 ("btrfs: skip subtree scan if it's too high to
avoid low stall in btrfs_commit_transaction()"), btrfs qgroup can
automatically skip large subtree scan at the cost of marking qgroup
inconsistent.
It's designed to address the final performance problem of snapshot drop
with qgroup enabled, but to be safe the default value is
BTRFS_MAX_LEVEL, requiring a user space daemon to set a different value
to make it work.
I'd say it's not a good idea to rely on user space tool to set this
default value, especially when some operations (snapshot dropping) can
be triggered immediately after mount, leaving a very small window to
that that sysfs interface.
So instead of disabling this new feature by default, enable it with a
low threshold (3), so that large subvolume tree drop at mount time won't
cause huge qgroup workload.
CC: stable@vger.kernel.org # 6.1
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
