summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-07-06Input: gpio_keys_polled - allow specifying name of input deviceEnrico Weigelt, metux IT consult
Instead of hardcoding the input name to the driver name ('gpio-keys-polled'), allow specifying the name of the device via "label" property. If the property is not present (nor name is set in board-supplied platform data), we'll default to the old name. Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-07-06xfs: don't update lastino for FSBULKSTAT_SINGLEDarrick J. Wong
The kernel test robot found a regression of xfs/054 in the conversion of bulkstat to use the new iwalk infrastructure -- if a caller set *lastip = 128 and invoked FSBULKSTAT_SINGLE, the bstat info would be for inode 128, but *lastip would be increased by the kernel to 129. FSBULKSTAT_SINGLE never incremented lastip before, so it's incorrect to make such an update to the internal lastino value now. Fixes: 2810bd6840e463 ("xfs: convert bulkstat to new iwalk infrastructure") Reported-by: kernel test robot <rong.a.chen@intel.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Allison Collins <allison.henderson@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
2019-07-07security/commoncap: Use xattr security prefix lenCarmeli Tamir
Using the existing defined XATTR_SECURITY_PREFIX_LEN instead of sizeof(XATTR_SECURITY_PREFIX) - 1. Pretty simple cleanup. Signed-off-by: Carmeli Tamir <carmeli.tamir@gmail.com> Signed-off-by: James Morris <jamorris@linux.microsoft.com>
2019-07-06Merge tag 'wireless-drivers-next-for-davem-2019-07-06' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 5.3 Second, and last, set of patches for 5.3. Major changes: mt76 * use NAPI polling for tx cleanup on mt7603/mt7615 * add support for toggling edcca on mt7603 * fix rate control / tx status reporting issues on mt76x02/mt7603 * add support for eeprom calibration data from mtd on mt7615 * support configuring tx power on mt7615 * per-chain signal reporting on mt7615 iwlwifi * Update the FW API for Channel State Information (CSI) * Special Specific Absorption Rate (SAR) implementation for South Korea ath10k * fixes for SDIO support * add support for firmware logging via WMI ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-06Merge tag 'nand/for-5.3' of ↵Richard Weinberger
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into mtd/next NAND core changes: - use longest matching pattern in ->exec_op() default parser - export NAND operation tracer - add flag to indicate panic_write in MTD - use kzalloc() instead of kmalloc() and memset() Raw NAND controller drivers changes: - brcmnand: * fix BCH ECC layout for large page NAND parts * fallback to detected ecc-strength, ecc-step-size * when oops in progress use pio and interrupt polling * code refactor code to introduce helper functions * add support for v7.3 controller - FSMC: * use nand_op_trace for operation tracing - GPMI: * move all driver code into single file * various cleanups (including dmaengine changes) * use runtime PM to manage clocks * implement exec_op - MTK: * correct low level time calculation of r/w cycle * improve data sampling timing for read cycle * add validity check for CE# pin setting * fix wrongly assigned OOB buffer pointer issue * re-license MTK NAND driver as Dual MIT/GPL - STM32: * manage the get_irq error case * increase DMA completion timeouts Raw NAND chips drivers changes: - Macronix: add read-retry support Onenand driver changes: - add support for 8Gb datasize chips - avoid fall-through warnings SPI-NAND changes: - define macros for page-read ops with three-byte addresses - add support for two-byte device IDs and then for GigaDevice GD5F1GQ4UFxxG - add initial support for Paragon PN26G0xA - handle the case where the last page read has bitflips
2019-07-06perf annotate TUI browser: Do not use member from variable within its own ↵Arnaldo Carvalho de Melo
initialization Some compilers will complain when using a member of a struct to initialize another member, in the same struct initialization. For instance: debian:8 Debian clang version 3.5.0-10 (tags/RELEASE_350/final) (based on LLVM 3.5.0) oraclelinux:7 clang version 3.4.2 (tags/RELEASE_34/dot2-final) Produce: ui/browsers/annotate.c:104:12: error: variable 'ops' is uninitialized when used within its own initialization [-Werror,-Wuninitialized] (!ops.current_entry || ^~~ 1 error generated. So use an extra variable, initialized just before that struct, to have the value used in the expressions used to init two of the struct members. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Fixes: c298304bd747 ("perf annotate: Use a ops table for annotation_line__write()") Link: https://lkml.kernel.org/n/tip-f9nexro58q62l3o9hez8hr0i@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-06Bluetooth: btusb: Add protocol support for MediaTek MT7663U USB devicesSean Wang
This adds the support of enabling MT7663U Bluetooth function running on the top of btusb driver. The information in /sys/kernel/debug/usb/devices about the Bluetooth device is listed as the below. T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 5 Spd=5000 MxCh= 0 D: Ver= 3.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=0e8d ProdID=7663 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=160mA A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06Bluetooth: btusb: Add protocol support for MediaTek MT7668U USB devicesSean Wang
This adds the support of enabling MT7668U Bluetooth function running on the top of btusb driver. The information in /sys/kernel/debug/usb/devices about the Bluetooth device is listed as the below. T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0 D: Ver= 3.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=0e8d ProdID=7668 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=160mA A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06Bluetooth: 6lowpan: always check destination addressJosua Mayer
BLE based 6LoWPAN networks are highly constrained in bandwidth. Do not take a short-cut, always check if the destination address is known to belong to a peer. As a side-effect this also removes any behavioral differences between one, and two or more connected peers. Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Tested-by: Michael Scott <mike@foundries.io> Signed-off-by: Josua Mayer <josua.mayer@jm0.eu> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06Bluetooth: 6lowpan: check neighbour table for SLAACJosua Mayer
Like any IPv6 capable device, 6LNs can have multiple addresses assigned using SLAAC and made known through neighbour advertisements. After checking the destination address against all peers link-local addresses, consult the neighbour cache for additional known addresses. RFC7668 defines the scope of Neighbor Advertisements in Section 3.2.3: 1. "A Bluetooth LE 6LN MUST NOT register its link-local address" 2. "A Bluetooth LE 6LN MUST register its non-link-local addresses with the 6LBR by sending Neighbor Solicitation (NS) messages ..." Due to these constranits both the link-local addresses tracked in the list of 6lowpan peers, and the neighbour cache have to be used when identifying the 6lowpan peer for a destination address. Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Tested-by: Michael Scott <mike@foundries.io> Signed-off-by: Josua Mayer <josua.mayer@jm0.eu> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06Bluetooth: 6lowpan: search for destination address in all peersJosua Mayer
Handle overlooked case where the target address is assigned to a peer and neither route nor gateway exist. For one peer, no checks are performed to see if it is meant to receive packets for a given address. As soon as there is a second peer however, checks are performed to deal with routes and gateways for handling complex setups with multiple hops to a target address. This logic assumed that no route and no gateway imply that the destination address can not be reached, which is false in case of a direct peer. Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Tested-by: Michael Scott <mike@foundries.io> Signed-off-by: Josua Mayer <josua.mayer@jm0.eu> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06SUNRPC: Fix possible autodisconnect during connect due to old last_usedDave Wysochanski
Ensure last_used is updated before calling mod_timer inside xprt_schedule_autodisconnect. This avoids a possible xprt_autoclose firing immediately after a successful connect when xprt_unlock_connect calls xprt_schedule_autodisconnect with an old value of last_used. Signed-off-by: Dave Wysochanski <dwysocha@redhat.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-07-06SUNRPC: Drop redundant CONFIG_ from CONFIG_SUNRPC_DISABLE_INSECURE_ENCTYPESAnna Schumaker
The "CONFIG_" portion is added automatically, so this was being expanded into "CONFIG_CONFIG_SUNRPC_DISABLE_INSECURE_ENCTYPES" Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-07-06NFS: Cleanup if nfs_match_client is interruptedBenjamin Coddington
Don't bail out before cleaning up a new allocation if the wait for searching for a matching nfs client is interrupted. Memory leaks. Reported-by: syzbot+7fe11b49c1cc30e3fce2@syzkaller.appspotmail.com Fixes: 950a578c6128 ("NFS: make nfs_match_client killable") Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-07-06nfs: disable client side deduplicationDarrick J. Wong
The NFS protocol doesn't support deduplication, so turn it off again. Fixes: ce96e888fe48e ("Fix nfs4.2 return -EINVAL when do dedupe operation") Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-07-06NFSv4: Add lease_time and lease_expired to 'nfs4:' line of mountstatsDave Wysochanski
On the NFS client there is no low-impact way to determine the nfs4 lease time or whether the lease is expired, so add these to mountstats with times displayed in seconds. If the lease is not expired, display lease_expired=0. Otherwise, display lease_expired=seconds_since_expired, similar to 'age:' line in mountstats. Signed-off-by: Dave Wysochanski <dwysocha@redhat.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-07-06NFS: Clean up writeback codeTrond Myklebust
Now that the VM promises never to recurse back into the filesystem layer on writeback, remove all the GFP_NOFS references etc from the generic writeback code. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-07-06Merge branch 'multipath_tcp'Trond Myklebust
2019-07-06Merge branch 'containers'Trond Myklebust
2019-07-06Merge branch 'cache_consistency'Trond Myklebust
2019-07-06SUNRPC: Remove warning in debugfs.c when compiling with W=1Trond Myklebust
Remove the following warning: net/sunrpc/debugfs.c:13: warning: cannot understand function prototype: 'struct dentry *topdir; Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-07-06Merge branch 'bh-remove'Trond Myklebust
2019-07-06SUNRPC: add links for all client xprts to debugfsNeilBrown
Now that a client can have multiple xprts, we need to add them all to debugs. The first one is still "xprt" Subsequent xprts are "xprt1", "xprt2", etc. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-07-06SUNRPC: Count ops completing with tk_status < 0Dave Wysochanski
We often see various error conditions with NFS4.x that show up with a very high operation count all completing with tk_status < 0 in a short period of time. Add a count to rpc_iostats to record on a per-op basis the ops that complete in this manner, which will enable lower overhead diagnostics. Signed-off-by: Dave Wysochanski <dwysocha@redhat.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-07-06SUNRPC: enhance rpc_clnt_show_stats() to report on all xprts.NeilBrown
Now that a client can have multiple xprts, we need to report the statistics for all of them. Reported-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-07-06SUNRPC: Use proper printk specifiers for unsigned long longDave Wysochanski
Update the printk specifiers inside _print_rpc_iostats to avoid a checkpatch warning. Signed-off-by: Dave Wysochanski <dwysocha@redhat.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-07-06SUNRPC: Move call to rpc_count_iostats before rpc_call_doneDave Wysochanski
For diagnostic purposes, it would be useful to have an rpc_iostats metric of RPCs completing with tk_status < 0. Unfortunately, tk_status is reset inside the rpc_call_done functions for each operation, and the call to tally the per-op metrics comes after rpc_call_done. Refactor the call to rpc_count_iostat earlier in rpc_exit_task so we can count these RPCs completing in error. Signed-off-by: Dave Wysochanski <dwysocha@redhat.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-07-06NFS: send state management on a single connection.NeilBrown
With NFSv4.1, different network connections need to be explicitly bound to a session. During session startup, this is not possible so only a single connection must be used for session startup. So add a task flag to disable the default round-robin choice of connections (when nconnect > 1) and force the use of a single connection. Then use that flag on all requests for session management - for consistence, include NFSv4.0 management (SETCLIENTID) and session destruction Reported-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-07-06NFS: Allow multiple connections to a NFSv2 or NFSv3 serverTrond Myklebust
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-07-06NFS: Display the "nconnect" mount option if it is set.Trond Myklebust
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2019-07-06pNFS: Allow multiple connections to the DSTrond Myklebust
If the user specifies -onconnect=<number> mount option, and the transport protocol is TCP, then set up <number> connections to the pNFS data server as well. The connections will all go to the same IP address. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2019-07-06NFSv4: Allow multiple connections to NFSv4.x (x>0) serversTrond Myklebust
If the user specifies the -onconn=<number> mount option, and the transport protocol is TCP, then set up <number> connections to the server. The connections will all go to the same IP address. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2019-07-06NFS: Add a mount option to specify number of TCP connections to useTrond Myklebust
Allow the user to specify that the client should use multiple connections to the server. For the moment, this functionality will be limited to TCP and to NFSv4.x (x>0). Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2019-07-06SUNRPC: Allow creation of RPC clients with multiple connectionsTrond Myklebust
Add an argument to struct rpc_create_args that allows the specification of how many transport connections you want to set up to the server. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2019-07-06NFS: Add sysfs support for per-container identifierTrond Myklebust
In order to identify containers to the NFS client, we add a per-net sysfs attribute that udev can fill with the appropriate identifier. The identifier could be a unique hostname, but in most cases it will probably be a persisted uuid. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-07-06NFS: Add deferred cache invalidation for close-to-open consistency violationsTrond Myklebust
If the client detects that close-to-open cache consistency has been violated, and that the file or directory has been changed on the server, then do a cache invalidation when we're done working with the file. The reason we don't do an immediate cache invalidation is that we want to avoid performance problems due to false positives. Also, note that we cannot guarantee cache consistency in this situation even if we do invalidate the cache. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-07-06SUNRPC: Remove the bh-safe lock requirement on the rpc_wait_queue->lockTrond Myklebust
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-07-06SUNRPC: Add basic load balancing to the transport switchTrond Myklebust
For now, just count the queue length. It is less accurate than counting number of bytes queued, but easier to implement. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2019-07-06NFS: Cleanup - add nfs_clients_exit to mirror nfs_clients_initTrond Myklebust
Add a helper to clean up the struct nfs_net when it is being destroyed. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-07-06NFS: Create a root NFS directory in /sys/fs/nfsTrond Myklebust
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-07-06SUNRPC: Remove the bh-safe lock requirement on xprt->transport_lockTrond Myklebust
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-07-06SUNRPC: Replace direct task wakeups from softirq contextTrond Myklebust
Replace the direct task wakeups from inside a softirq context with wakeups from a process context. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-07-06SUNRPC: Replace the queue timer with a delayed work functionTrond Myklebust
The queue timer function, which walks the RPC queue in order to locate candidates for waking up is one of the current constraints against removing the bh-safe queue spin locks. Replace it with a delayed work queue, so that we can do the actual rpc task wake ups from an ordinary process context. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-07-06NFSv4: Handle the special Linux file open access modeTrond Myklebust
According to the open() manpage, Linux reserves the access mode 3 to mean "check for read and write permission on the file and return a file descriptor that can't be used for reading or writing." Currently, the NFSv4 code will ask the server to open the file, and will use an incorrect share access mode of 0. Since it has an incorrect share access mode, the client later forgets to send a corresponding close, meaning it can leak stateids on the server. Fixes: ce4ef7c0a8a05 ("NFS: Split out NFS v4 file operations") Cc: stable@vger.kernel.org # 3.6+ Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-07-06NFSv4: Handle open for execute correctlyTrond Myklebust
When mapping the NFSv4 context to an open mode and access mode, we need to treat the FMODE_EXEC flag differently. For the open mode, FMODE_EXEC means we need read share access. For the access mode checking, we need to verify that the user actually has execute access. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-07-06Merge tag 'for-linus-20190706' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fix from Jens Axboe: "Just a single fix for a patch from Greg KH, which reportedly break block debugfs locations for certain setups. Trivial enough that I think we should include it now, rather than wait and release 5.2 with it, since it's a regression in this series" * tag 'for-linus-20190706' of git://git.kernel.dk/linux-block: blk-mq: fix up placement of debugfs directory of queue files
2019-07-06Revert "gpio: tegra: Clean-up debugfs initialisation"Linus Walleij
This reverts commit a4de43049a1d0e2ed2a1d95e18e74b82cd9ca058. The commit creates build errors. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-07-06gpiolib: Use spinlock_t instead of struct spinlockSebastian Andrzej Siewior
For spinlocks the type spinlock_t should be used instead of "struct spinlock". Use spinlock_t for spinlock's definition. Cc: linux-gpio@vger.kernel.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Link: https://lore.kernel.org/r/20190704153803.12739-8-bigeasy@linutronix.de Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-07-06Merge tag 'mips_fixes_5.2_2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS fixes from Paul Burton: "A few more MIPS fixes: - Fix a silly typo in virt_addr_valid which led to completely bogus behavior (that happened to stop tripping up hardened usercopy despite being broken). - Fix UART parity setup on AR933x systems. - A build fix for non-Linux build machines. - Have the 'all' make target build DTBs, primarily to fit in with the behavior of scripts/package/builddeb. - Handle an execution hazard in TLB exceptions that use KScratch registers, which could inadvertently clobber the $1 register on some generally higher-end out-of-order CPUs. - A MAINTAINERS update to fix the path to the NAND driver for Ingenic systems" * tag 'mips_fixes_5.2_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MAINTAINERS: Correct path to moved files MIPS: Add missing EHB in mtc0 -> mfc0 sequence. MIPS: have "plain" make calls build dtbs for selected platforms MIPS: fix build on non-linux hosts MIPS: ath79: fix ar933x uart parity mode MIPS: Fix bounds check virt_addr_valid
2019-07-06perf tests: Fix record+probe_libc_inet_pton.sh for powerpc64Seeteena Thoufeek
'probe libc's inet_pton & backtrace it with ping' testcase sometimes fails on powerpc because distro ping binary does not have symbol information and thus it prints "[unknown]" function name in the backtrace. Accept "[unknown]" as valid function name for powerpc as well. # perf test -v "probe libc's inet_pton & backtrace it with ping" Before: 59: probe libc's inet_pton & backtrace it with ping : --- start --- test child forked, pid 79695 ping 79718 [077] 96483.787025: probe_libc:inet_pton: (7fff83a754c8) 7fff83a754c8 __GI___inet_pton+0x8 (/usr/lib64/power9/libc-2.28.so) 7fff83a2b7a0 gaih_inet.constprop.7+0x1020 (/usr/lib64/power9/libc-2.28.so) 7fff83a2c170 getaddrinfo+0x160 (/usr/lib64/power9/libc-2.28.so) 1171830f4 [unknown] (/usr/bin/ping) FAIL: expected backtrace entry ".*\+0x[[:xdigit:]]+[[:space:]]\(.*/bin/ping.*\)$" got "1171830f4 [unknown] (/usr/bin/ping)" test child finished with -1 ---- end ---- probe libc's inet_pton & backtrace it with ping: FAILED! After: 59: probe libc's inet_pton & backtrace it with ping : --- start --- test child forked, pid 79085 ping 79108 [045] 96400.214177: probe_libc:inet_pton: (7fffbb9654c8) 7fffbb9654c8 __GI___inet_pton+0x8 (/usr/lib64/power9/libc-2.28.so) 7fffbb91b7a0 gaih_inet.constprop.7+0x1020 (/usr/lib64/power9/libc-2.28.so) 7fffbb91c170 getaddrinfo+0x160 (/usr/lib64/power9/libc-2.28.so) 132e830f4 [unknown] (/usr/bin/ping) test child finished with 0 ---- end ---- probe libc's inet_pton & backtrace it with ping: Ok Signed-off-by: Seeteena Thoufeek <s1seetee@linux.vnet.ibm.com> Reviewed-by: Kim Phillips <kim.phillips@amd.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Hendrik Brueckner <brueckner@linux.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sandipan Das <sandipan@linux.ibm.com> Fixes: 1632936480a5 ("perf tests: Fix record+probe_libc_inet_pton.sh without ping's debuginfo") Link: http://lkml.kernel.org/r/1561630614-3216-1-git-send-email-s1seetee@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-23 20:16:36 +0000