| Age | Commit message (Collapse) | Author |
|---|
|
In several situations the CM may send a reply to a received MAD
without the reply being directly linked with a cm_id. For
example, it may send a REJ in response to a REQ which does not
match a listener. Or, it may send a DREP in response to a DREQ
if the cm_id has already been destroyed. This can happen if the
original DREP was lost and the DREQ was retried.
When such a response MAD completes, it updates a counter tracking
how many MADs were retried. However, not all response MADs issued
directly by the CM may be retries. The REJ mentioned in the example
above is such a case. To distinguish between responses which were
retries versus those that are not, the send_handler performs the
following check: is a retry if the response is not associated with
a cm_id and the response is not a REJ message.
Replace this indirect method of checking if a response is a retry
with an explicit check. Note that these retries are generated
directly by the CM, rather than retried by the MAD layer.
This change will be needed by later changes which would otherwise
break the indirect check.
Signed-off-by: Sean Hefty <shefty@nvidia.com>
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Signed-off-by: Vlad Dumitrescu <vdumitrescu@nvidia.com>
Link: https://patch.msgid.link/1ee6e2a68f8de1992b9da23aa1d7e3f9f25e0036.1731495873.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
When we load SSDT from efi variable (specified with efivar_ssdt=<var>
boot command line argument) a name for the variable is allocated
dynamically because we traverse all EFI variables. Unlike ACPI table
data, which is later used by ACPI engine, the name is no longer needed
once traverse is complete -- don't forget to free this memory.
Same time we silently ignore any errors happened here let's print a
message if something went wrong (but do not exit since this is not a
critical error and the system should continue to boot).
Also while here -- add a note why we keep SSDT table on success.
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
When CONFIG_CMDLINE_OVERRIDE or CONFIG_CMDLINE_FORCE are configured, the
command line provided by the boot stack should be ignored, and only the
built-in command line should be taken into account.
Add the required handling of this when dealing with initrd= or dtb=
command line options in the EFI stub.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
CONFIG_CMDLINE, when set, is supposed to serve either as a fallback when
no command line is provided by the bootloader, or to be taken into account
unconditionally, depending on the configured options.
The initrd and dtb loader ignores CONFIG_CMDLINE in either case, and
only takes the EFI firmware provided load options into account. This
means that configuring the kernel with initrd= or dtb= on the built-in
command line does not produce the expected result.
Fix this by doing a separate pass over the built-in command line when
dealing with initrd= or dtb= options.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
<linux/compiler.h> defines __must_be_array() and __must_be_cstr() and
both expand to BUILD_BUG_ON_ZERO(), but <linux/build_bug.h> defines
BUILD_BUG_ON_ZERO(). Including <linux/build_bug.h> in
<linux/compiler.h> would create a cyclic dependency as
<linux/build_bug.h> already includes <linux/compiler.h>.
Fix that by defining __BUILD_BUG_ON_ZERO_MSG() in <linux/compiler.h>
and using that for __must_be_array() and __must_be_cstr().
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Link: https://lore.kernel.org/r/20241115204602.249590-1-philipp.reisner@linbit.com
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull hotfixes from Andrew Morton:
"10 hotfixes, 7 of which are cc:stable. All singletons, please see the
changelogs for details"
* tag 'mm-hotfixes-stable-2024-11-16-15-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: revert "mm: shmem: fix data-race in shmem_getattr()"
ocfs2: uncache inode which has failed entering the group
mm: fix NULL pointer dereference in alloc_pages_bulk_noprof
mm, doc: update read_ahead_kb for MADV_HUGEPAGE
fs/proc/task_mmu: prevent integer overflow in pagemap_scan_get_args()
sched/task_stack: fix object_is_on_stack() for KASAN tagged pointers
crash, powerpc: default to CRASH_DUMP=n on PPC_BOOK3S_32
mm/mremap: fix address wraparound in move_page_tables()
tools/mm: fix compile error
mm, swap: fix allocation and scanning race with swapoff
|
|
Revert d949d1d14fa2 ("mm: shmem: fix data-race in shmem_getattr()") as
suggested by Chuck [1]. It is causing deadlocks when accessing tmpfs over
NFS.
As Hugh commented, "added just to silence a syzbot sanitizer splat: added
where there has never been any practical problem".
Link: https://lkml.kernel.org/r/ZzdxKF39VEmXSSyN@tissot.1015granger.net [1]
Fixes: d949d1d14fa2 ("mm: shmem: fix data-race in shmem_getattr()")
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Jeongjun Park <aha310510@gmail.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Pull ARM fixes from Russell King:
- Fix kernel mapping for XIP kernels
- Fix SMP support for XIP kernels
- Fix complication corner case with CFI
- Fix a typo in nommu code
- Fix cacheflush syscall when PAN is enabled on LPAE platforms
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
ARM: fix cacheflush with PAN
ARM: 9435/1: ARM/nommu: Fix typo "absence"
ARM: 9434/1: cfi: Fix compilation corner case
ARM: 9420/1: smp: Fix SMP for xip kernels
ARM: 9419/1: mm: Fix kernel memory mapping for xip kernels
|
|
Pull drm fix from Dave Airlie:
"Alex sent on a last minute revert for a amdgpu/swsmu regression:
- revert patch to fix swsmu regression"
* tag 'drm-fixes-2024-11-17' of https://gitlab.freedesktop.org/drm/kernel:
Revert "drm/amd/pm: correct the workload setting"
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.12-2024-11-16:
amdgpu:
- Revert a swsmu patch to fix a regression
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241116145320.2507156-1-alexander.deucher@amd.com
|
|
Due to an apparent copy-paste bug, the parisc implementation of
ftrace_disable_ftrace_graph_caller() doesn't actually do anything.
It enables the (already-enabled) static key rather than disabling it.
The result is that after function graph tracing has been "disabled", any
subsequent (non-graph) function tracing will inadvertently also enable
the slow fgraph return address hijacking.
Fixes: 98f2926171ae ("parisc/ftrace: use static key to enable/disable function graph tracer")
Cc: stable@vger.kernel.org # 5.16+
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Merge the slab feature branch for 6.13:
- Add new slab_strict_numa parameter for per-object memory policies
(Christoph Lameter)
|
|
When kobject_init_and_add() fails during cache creation,
kobj->name can be leaked because SLUB does not call kobject_put(),
which should be invoked per the kobject API documentation.
This has a bit of historical context, though; SLUB does not call
kobject_put() to avoid double-free for struct kmem_cache because
1) simply calling it would free all resources related to the cache, and
2) struct kmem_cache descriptor is always freed by cache_cache()'s
error handling path, causing struct kmem_cache to be freed twice.
This issue can be reproduced by creating new slab caches while applying
failslab for kernfs_node_cache. This makes kobject_add_varg() succeed,
but causes kobject_add_internal() to fail in kobject_init_and_add()
during cache creation.
Historically, this issue has attracted developers' attention several times.
Each time a fix addressed either the leak or the double-free,
it caused the other issue. Let's summarize a bit of history here:
The leak has existed since the early days of SLUB.
Commit 54b6a731025f ("slub: fix leak of 'name' in sysfs_slab_add")
introduced a double-free bug while fixing the leak.
Commit 80da026a8e5d ("mm/slub: fix slab double-free in case of duplicate
sysfs filename") re-introduced the leak while fixing the double-free
error.
Commit dde3c6b72a16 ("mm/slub: fix a memory leak in sysfs_slab_add()")
fixed the memory leak, but it was later reverted by commit 757fed1d0898
("Revert "mm/slub: fix a memory leak in sysfs_slab_add()"") to avoid
the double-free error.
This is where we are now: we've chosen a memory leak over a double-free.
To resolve this memory leak, skip creating sysfs files if it fails
and continue with cache creation regardless (as suggested by Christoph).
This resolves the memory leak because both the cache and the kobject
remain alive on kobject_init_and_add() failure.
If SLUB tries to create an alias for a cache without sysfs files,
its symbolic link will not be generated.
Since a slab cache might not have associated sysfs files, call kobject_del()
only if such files exist.
Signed-off-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Boot with slub_debug=UFPZ.
If allocated object failed in alloc_consistency_checks, all objects of
the slab will be marked as used, and then the slab will be removed from
the partial list.
When an object belonging to the slab got freed later, the remove_full()
function is called. Because the slab is neither on the partial list nor
on the full list, it eventually lead to a list corruption (actually a
list poison being detected).
So we need to mark and isolate the slab page with metadata corruption,
do not put it back in circulation.
Because the debug caches avoid all the fastpaths, reusing the frozen bit
to mark slab page with metadata corruption seems to be fine.
[ 4277.385669] list_del corruption, ffffea00044b3e50->next is LIST_POISON1 (dead000000000100)
[ 4277.387023] ------------[ cut here ]------------
[ 4277.387880] kernel BUG at lib/list_debug.c:56!
[ 4277.388680] invalid opcode: 0000 [#1] PREEMPT SMP PTI
[ 4277.389562] CPU: 5 PID: 90 Comm: kworker/5:1 Kdump: loaded Tainted: G OE 6.6.1-1 #1
[ 4277.392113] Workqueue: xfs-inodegc/vda1 xfs_inodegc_worker [xfs]
[ 4277.393551] RIP: 0010:__list_del_entry_valid_or_report+0x7b/0xc0
[ 4277.394518] Code: 48 91 82 e8 37 f9 9a ff 0f 0b 48 89 fe 48 c7 c7 28 49 91 82 e8 26 f9 9a ff 0f 0b 48 89 fe 48 c7 c7 58 49 91
[ 4277.397292] RSP: 0018:ffffc90000333b38 EFLAGS: 00010082
[ 4277.398202] RAX: 000000000000004e RBX: ffffea00044b3e50 RCX: 0000000000000000
[ 4277.399340] RDX: 0000000000000002 RSI: ffffffff828f8715 RDI: 00000000ffffffff
[ 4277.400545] RBP: ffffea00044b3e40 R08: 0000000000000000 R09: ffffc900003339f0
[ 4277.401710] R10: 0000000000000003 R11: ffffffff82d44088 R12: ffff888112cf9910
[ 4277.402887] R13: 0000000000000001 R14: 0000000000000001 R15: ffff8881000424c0
[ 4277.404049] FS: 0000000000000000(0000) GS:ffff88842fd40000(0000) knlGS:0000000000000000
[ 4277.405357] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 4277.406389] CR2: 00007f2ad0b24000 CR3: 0000000102a3a006 CR4: 00000000007706e0
[ 4277.407589] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 4277.408780] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 4277.410000] PKRU: 55555554
[ 4277.410645] Call Trace:
[ 4277.411234] <TASK>
[ 4277.411777] ? die+0x32/0x80
[ 4277.412439] ? do_trap+0xd6/0x100
[ 4277.413150] ? __list_del_entry_valid_or_report+0x7b/0xc0
[ 4277.414158] ? do_error_trap+0x6a/0x90
[ 4277.414948] ? __list_del_entry_valid_or_report+0x7b/0xc0
[ 4277.415915] ? exc_invalid_op+0x4c/0x60
[ 4277.416710] ? __list_del_entry_valid_or_report+0x7b/0xc0
[ 4277.417675] ? asm_exc_invalid_op+0x16/0x20
[ 4277.418482] ? __list_del_entry_valid_or_report+0x7b/0xc0
[ 4277.419466] ? __list_del_entry_valid_or_report+0x7b/0xc0
[ 4277.420410] free_to_partial_list+0x515/0x5e0
[ 4277.421242] ? xfs_iext_remove+0x41a/0xa10 [xfs]
[ 4277.422298] xfs_iext_remove+0x41a/0xa10 [xfs]
[ 4277.423316] ? xfs_inodegc_worker+0xb4/0x1a0 [xfs]
[ 4277.424383] xfs_bmap_del_extent_delay+0x4fe/0x7d0 [xfs]
[ 4277.425490] __xfs_bunmapi+0x50d/0x840 [xfs]
[ 4277.426445] xfs_itruncate_extents_flags+0x13a/0x490 [xfs]
[ 4277.427553] xfs_inactive_truncate+0xa3/0x120 [xfs]
[ 4277.428567] xfs_inactive+0x22d/0x290 [xfs]
[ 4277.429500] xfs_inodegc_worker+0xb4/0x1a0 [xfs]
[ 4277.430479] process_one_work+0x171/0x340
[ 4277.431227] worker_thread+0x277/0x390
[ 4277.431962] ? __pfx_worker_thread+0x10/0x10
[ 4277.432752] kthread+0xf0/0x120
[ 4277.433382] ? __pfx_kthread+0x10/0x10
[ 4277.434134] ret_from_fork+0x2d/0x50
[ 4277.434837] ? __pfx_kthread+0x10/0x10
[ 4277.435566] ret_from_fork_asm+0x1b/0x30
[ 4277.436280] </TASK>
Fixes: 643b113849d8 ("slub: enable tracking of full slabs")
Suggested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Suggested-by: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: yuan.gao <yuan.gao@ucloud.cn>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Acked-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Danilo Krummrich raised issue about krealloc+GFP_ZERO [1], and Vlastimil
suggested to add some test case which can sanity test the kmalloc-redzone
and zeroing by utilizing the kmalloc's 'orig_size' debug feature.
It covers the grow and shrink case of krealloc() re-using current kmalloc
object, and the case of re-allocating a new bigger object.
[1]. https://lore.kernel.org/lkml/20240812223707.32049-1-dakr@kernel.org/
Suggested-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
For current krealloc(), one problem is its caller doesn't pass the old
request size, say the object is 64 bytes kmalloc one, but caller may
only requested 48 bytes. Then when krealloc() shrinks or grows in the
same object, or allocate a new bigger object, it lacks this 'original
size' information to do accurate data preserving or zeroing (when
__GFP_ZERO is set).
Thus with slub debug redzone and object tracking enabled, parts of the
object after krealloc() might contain redzone data instead of zeroes,
which is violating the __GFP_ZERO guarantees. Good thing is in this
case, kmalloc caches do have this 'orig_size' feature. So solve the
problem by utilize 'org_size' to do accurate data zeroing and preserving.
[Thanks to syzbot and V, Narasimhan for discovering kfence and big
kmalloc related issues in early patch version]
Suggested-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Feng Tang <feng.tang@intel.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
When 'orig_size' of kmalloc object is enabled by debug option, it
should either contains the actual requested size or the cache's
'object_size'.
But it's not true if that object is a kfence-allocated one, and the
data at 'orig_size' offset of metadata could be zero or other values.
This is not a big issue for current 'orig_size' usage, as init_object()
and check_object() during alloc/free process will be skipped for kfence
addresses. But it could cause trouble for other usage in future.
Use the existing kfence helper kfence_ksize() which can return the
real original request size.
Signed-off-by: Feng Tang <feng.tang@intel.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
del_perf_probe_events() last use was removed by commit 3d6dfae889174340
("perf parse-events: Remove BPF event support")
Remove it.
It was the last user of probe_file__del_events(), so remove it as well.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241022002940.302946-1-linux@treblig.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Move pmu_metrics_table__find() to the jevents.py generated pmu-events.c
and remove indirection override for ARM.
The movement removes perf_pmu__find_metrics_table that exists to enable
the ARM override.
The ARM override isn't necessary as just the CPUID, not PMU, is used in
the metric table lookup.
On non-ARM the CPU argument is just ignored for the CPUID, for ARM -1 is
passed so that the CPUID for the first logical CPU is read.
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Xu Yang <xu.yang_2@nxp.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ben Zong-You Xie <ben717@andestech.com>
Cc: Benjamin Gray <bgray@linux.ibm.com>
Cc: Bibo Mao <maobibo@loongson.cn>
Cc: Clément Le Goffic <clement.legoffic@foss.st.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-riscv@lists.infradead.org
Link: https://lore.kernel.org/r/20241107162035.52206-9-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The PMU is no longer part of the map finding process and for metrics
doesn't make sense as they lack a PMU.
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Xu Yang <xu.yang_2@nxp.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ben Zong-You Xie <ben717@andestech.com>
Cc: Benjamin Gray <bgray@linux.ibm.com>
Cc: Bibo Mao <maobibo@loongson.cn>
Cc: Clément Le Goffic <clement.legoffic@foss.st.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-riscv@lists.infradead.org
Link: https://lore.kernel.org/r/20241107162035.52206-8-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
On ARM the cpuid is dependent on the core type of the CPU in
question. The PMU was passed for the sake of the CPU map but this
means in places a temporary PMU is created just to pass a CPU
value. Just pass the CPU and fix up the callers.
As there are no longer PMU users in header.h, shuffle forward
declarations earlier to work around build failures.
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Xu Yang <xu.yang_2@nxp.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ben Zong-You Xie <ben717@andestech.com>
Cc: Benjamin Gray <bgray@linux.ibm.com>
Cc: Bibo Mao <maobibo@loongson.cn>
Cc: Clément Le Goffic <clement.legoffic@foss.st.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-riscv@lists.infradead.org
Link: https://lore.kernel.org/r/20241107162035.52206-7-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Currently satisfied via header.h. Note, pmu.h includes parse-events.h.
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Xu Yang <xu.yang_2@nxp.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ben Zong-You Xie <ben717@andestech.com>
Cc: Benjamin Gray <bgray@linux.ibm.com>
Cc: Bibo Mao <maobibo@loongson.cn>
Cc: Clément Le Goffic <clement.legoffic@foss.st.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-riscv@lists.infradead.org
Link: https://lore.kernel.org/r/20241107162035.52206-6-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Use the cpu to read the MIDR file requested. If the "any" value (-1) is
passed that keep the behavior of returning the first MIDR file that can
be read.
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Xu Yang <xu.yang_2@nxp.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ben Zong-You Xie <ben717@andestech.com>
Cc: Benjamin Gray <bgray@linux.ibm.com>
Cc: Bibo Mao <maobibo@loongson.cn>
Cc: Clément Le Goffic <clement.legoffic@foss.st.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-riscv@lists.infradead.org
Link: https://lore.kernel.org/r/20241107162035.52206-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
ARM BIG.little has no notion of a constant CPUID for both core
types. To reflect this reality, change the get_cpuid function to also
pass in a possibly unused logical cpu.
If the dummy value (-1) is passed in then ARM can, as currently happens,
select the first logical CPU's "CPUID".
The changes to ARM getcpuid happen in a follow up change.
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Xu Yang <xu.yang_2@nxp.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ben Zong-You Xie <ben717@andestech.com>
Cc: Benjamin Gray <bgray@linux.ibm.com>
Cc: Bibo Mao <maobibo@loongson.cn>
Cc: Clément Le Goffic <clement.legoffic@foss.st.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-riscv@lists.infradead.org
Link: https://lore.kernel.org/r/20241107162035.52206-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The helper function is only used in the NUMA benchmark as typically
online CPUs are determined through perf_cpu_map__new_online_cpus().
Reduce the scope of the function for now.
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Xu Yang <xu.yang_2@nxp.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ben Zong-You Xie <ben717@andestech.com>
Cc: Benjamin Gray <bgray@linux.ibm.com>
Cc: Bibo Mao <maobibo@loongson.cn>
Cc: Clément Le Goffic <clement.legoffic@foss.st.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-riscv@lists.infradead.org
Link: https://lore.kernel.org/r/20241107162035.52206-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When do perf stat on sys metric, perf tool output nothing now:
$ perf stat -a -M imx95_ddr_read.all -I 1000
$
This command runs on an arm64 machine and the Soc has one DDR hw pmu
except one armv8_cortex_a55 pmu. Their maps show as follows:
const struct pmu_events_map pmu_events_map[] = {
{
.arch = "arm64",
.cpuid = "0x00000000410fd050",
.event_table = {
.pmus = pmu_events__arm_cortex_a55,
.num_pmus = ARRAY_SIZE(pmu_events__arm_cortex_a55)
},
.metric_table = {
.pmus = NULL,
.num_pmus = 0
}
},
static const struct pmu_sys_events pmu_sys_event_tables[] = {
{
.event_table = {
.pmus = pmu_events__freescale_imx95_sys,
.num_pmus = ARRAY_SIZE(pmu_events__freescale_imx95_sys)
},
.metric_table = {
.pmus = pmu_metrics__freescale_imx95_sys,
.num_pmus = ARRAY_SIZE(pmu_metrics__freescale_imx95_sys)
},
.name = "pmu_events__freescale_imx95_sys",
},
Currently, pmu_metrics_table__find() will return NULL when only do perf
stat on sys metric. Then parse_groups() will never be called to parse
sys metric_name, finally perf tool will exit directly. This should be a
common problem.
To fix the issue, this will keep the logic before commit f20c15d13f01
("perf pmu-events: Remember the perf_events_map for a PMU") to return a
empty metric table rather than a NULL pointer.
This should be fine since the removed part just check if the table match
provided metric_name. Without these code, the code in parse_groups()
will also check the validity of metrci_name too.
Fixes: f20c15d13f017d4b ("perf pmu-events: Remember the perf_events_map for a PMU")
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Tested-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Benjamin Gray <bgray@linux.ibm.com>
Cc: Ben Zong-You Xie <ben717@andestech.com>
Cc: Bibo Mao <maobibo@loongson.cn>
Cc: Clément Le Goffic <clement.legoffic@foss.st.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-riscv@lists.infradead.org
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20241107162035.52206-2-irogers@google.com
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Address sanitizer flagged the missing parse_events_error__exit when
testing on ARM.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241115201258.509477-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Arm a57 only has speculative branch events so this test fails there. The
test doesn't depend on branch instructions so change it to instructions
which is pretty much guaranteed to be everywhere. The
test_branch_counter() test above already tests for the existence of the
branches event and skips if its not present.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Veronika Molnarova <vmolnaro@redhat.com>
Link: https://lore.kernel.org/r/20241115161600.228994-1-james.clark@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
fetch_kernel_version() has been unused since Ian's 2023 commit
3d6dfae889174340 ("perf parse-events: Remove BPF event support")
Remove it, and it's helpers.
I noticed there are a bunch of kernel-version macros that are also
unused nearby.
Also remove them.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241116155850.113129-1-linux@treblig.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
isn't resolved
The purpose of this test is to test for races in the exit of 'perf
trace' missing the last events, it was failing when the COMM wasn't
resolved either because we missed some PERF_RECORD_COMM or somehow
raced on getting it from procfs.
Add --no-comm to the 'perf trace' command line so that we get a
consistent, pid only output, which allows the test to achieve its goal.
This is the output from
'perf trace --no-comm -e syscalls:sys_enter_exit_group':
0.000 21953 syscalls:sys_enter_exit_group()
0.000 21955 syscalls:sys_enter_exit_group()
0.000 21957 syscalls:sys_enter_exit_group()
0.000 21959 syscalls:sys_enter_exit_group()
0.000 21961 syscalls:sys_enter_exit_group()
0.000 21963 syscalls:sys_enter_exit_group()
0.000 21965 syscalls:sys_enter_exit_group()
0.000 21967 syscalls:sys_enter_exit_group()
0.000 21969 syscalls:sys_enter_exit_group()
0.000 21971 syscalls:sys_enter_exit_group()
Now it passes:
root@number:~# perf test "trace exit race"
110: perf trace exit race : Ok
root@number:~#
root@number:~# perf test -v "trace exit race"
110: perf trace exit race : Ok
root@number:~#
If we artificially make it run just 9 times instead of the 10 it runs,
i.e. by manually doing:
trace_shutdown_race() {
for _ in $(seq 9); do
that 9 is $iter, 10 in the patch, we get:
root@number:~# vim ~acme/libexec/perf-core/tests/shell/trace_exit_race.sh
root@number:~# perf test -v "trace exit race"
--- start ---
test child forked, pid 24629
Missing output, expected 10 but only got 9
---- end(-1) ----
110: perf trace exit race : FAILED!
root@number:~#
I.e. 9 'perf trace' calls produced the expected output, the inverse grep
didn't show anything, so the patch provided by Howard for the previous
patch kicks in and shows a more informative message.
Tested-by: Howard Chu <howardchu95@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Benjamin Peterson <benjamin@engflow.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/lkml/ZzdknoHqrJbojb6P@x1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The hash_combine() could be trapped when compiled with sanitizer like "zig cc"
or clang with signed-integer-overflow option. This patch parameters and return
type to unsigned long to remove the potential overflow.
Signed-off-by: Sidong Yang <sidong.yang@furiosa.ai>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20241116081054.65195-1-sidong.yang@furiosa.ai
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
llvm 19 fails to compile arena self test:
CLNG-BPF [test_progs] verifier_arena_large.bpf.o
progs/verifier_arena_large.c:90:24: error: unsupported signed division, please convert to unsigned div/mod.
90 | pg_idx = (pg - base) / PAGE_SIZE;
Though llvm <= 18 and llvm >= 20 don't have this issue,
fix the test to avoid the build error.
Reported-by: Jiri Olsa <olsajiri@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The advertised resizable BAR size was fixed in commit 72e34b8593e0 ("PCI:
dwc: endpoint: Fix advertised resizable BAR size").
Commit 867ab111b242 ("PCI: dwc: ep: Add a generic dw_pcie_ep_linkdown()
API to handle Link Down event") was included shortly after this, and
moved the code to another function. When the code was moved, this fix
was mistakenly lost.
According to the spec, it is illegal to not have a bit set in
PCI_REBAR_CAP, and 1 MB is the smallest size allowed.
So, set bit 4 in PCI_REBAR_CAP, so that we actually advertise support
for a 1 MB BAR size.
Fixes: 867ab111b242 ("PCI: dwc: ep: Add a generic dw_pcie_ep_linkdown() API to handle Link Down event")
Link: https://lore.kernel.org/r/20241116005950.2480427-2-cassel@kernel.org
Link: https://lore.kernel.org/r/20240606-pci-deinit-v1-3-4395534520dc@linaro.org
Link: https://lore.kernel.org/r/20240307111520.3303774-1-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Cc: stable@vger.kernel.org
|
|
The use of of_property_read_bool() for non-boolean properties is
deprecated in favor of of_property_present() when testing for property
presence.
Link: https://lore.kernel.org/r/20241104190714.275977-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
If platform_get_resource_byname() fails and returns NULL because DT lacks
an 'mmio' property for the MHI endpoint, dereferencing res->start will
cause a NULL pointer access. Add a check to prevent it.
Fixes: 1bf5f25324f7 ("PCI: endpoint: Add PCI Endpoint function driver for MHI bus")
Link: https://lore.kernel.org/r/20241105120735.1240728-1-quic_zhonhan@quicinc.com
Signed-off-by: Zhongqiu Han <quic_zhonhan@quicinc.com>
[kwilczynski: error message update per the review feedback]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
|
|
pci_epf_test_clean_dma_chan()
Remove a surplus return statement from the void function that has been
added in the commit commit 8353813c88ef ("PCI: endpoint: Enable DMA
tests for endpoints with DMA capabilities").
Especially, as an empty return statements at the end of a void functions
serve little purpose.
This fixes the following checkpatch.pl script warning:
WARNING: void function return statements are not generally useful
#296: FILE: drivers/pci/endpoint/functions/pci-epf-test.c:296:
+ return;
+}
Link: https://lore.kernel.org/r/tencent_F250BEE2A65745A524E2EFE70CF615CA8F06@qq.com
Signed-off-by: Wang Jiang <jiangwang@kylinos.cn>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
Use the dw_pcie_ep_align_addr() function to calculate the alignment in
dw_pcie_ep_raise_{msi,msix}_irq() instead of open coding the same.
Link: https://lore.kernel.org/r/20241017132052.4014605-6-cassel@kernel.org
Link: https://lore.kernel.org/r/20241104205144.409236-2-cassel@kernel.org
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
[kwilczynski: squashed patch that fixes memory map sizes]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull ring buffer fixes from Steven Rostedt:
- Revert: "ring-buffer: Do not have boot mapped buffers hook to CPU
hotplug"
A crash that happened on cpu hotplug was actually caused by the
incorrect ref counting that was fixed by commit 2cf9733891a4
("ring-buffer: Fix refcount setting of boot mapped buffers"). The
removal of calling cpu hotplug callbacks on memory mapped buffers was
not an issue even though the tests at the time pointed toward it. But
in fact, there's a check in that code that tests to see if the
buffers are already allocated or not, and will not allocate them
again if they are. Not calling the cpu hotplug callbacks ended up not
initializing the non boot CPU buffers.
Simply remove that change.
- Clear all CPU buffers when starting tracing in a boot mapped buffer
To properly process events from a previous boot, the address space
needs to be accounted for due to KASLR and the events in the buffer
are updated accordingly when read. This also requires that when the
buffer has tracing enabled again in the current boot that the buffers
are reset so that events from the previous boot do not interact with
the events of the current boot and cause confusing due to not having
the proper meta data.
It was found that if a CPU is taken offline, that its per CPU buffer
is not reset when tracing starts. This allows for events to be from
both the previous boot and the current boot to be in the buffer at
the same time. Clear all CPU buffers when tracing is started in a
boot mapped buffer.
* tag 'trace-ringbuffer-v6.12-rc7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/ring-buffer: Clear all memory mapped CPU ring buffers on first recording
Revert: "ring-buffer: Do not have boot mapped buffers hook to CPU hotplug"
|
|
6cf57be0f78e ("PCI: Add pcie_get_speed_cap() to find max supported link
speed") and c70b65fb7f12 ("PCI: Add pcie_get_width_cap() to find max
supported link width") added declarations to drivers/pci/pci.h.
576c7218a154 ("PCI: Export pcie_get_speed_cap and pcie_get_width_cap")
subsequently added duplicates to include/linux/pci.h.
Remove the originals from drivers/pci/pci.h. Both interfaces are used by
amdgpu, so they must be in include/linux/pci.h.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Krzysztof Wilczyński <kw@linux.com>
|
|
Create selftests for PCIe BW control through the PCIe cooling device sysfs
interface.
First, the BW control selftest finds the PCIe Port to test with. By
default, the PCIe Port with the highest Link Speed is selected but
another PCIe Port can be provided with -d parameter.
The actual test steps the cur_state of the cooling device one-by-one
from max_state to what the cur_state was initially. The speed change
is confirmed by observing the current_link_speed for the corresponding
PCIe Port.
Link: https://lore.kernel.org/r/20241018144755.7875-10-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add a thermal cooling driver to provide path to access PCIe bandwidth
controller using the usual thermal interfaces.
A cooling device is instantiated for controllable PCIe Ports from the
bwctrl service driver.
If registering the cooling device fails, allow bwctrl's probe to succeed
regardless. As cdev in that case contains IS_ERR() pseudo "pointer", clean
that up inside the probe function so the remove side doesn't need to
suddenly make an odd looking IS_ERR() check.
The thermal side state 0 means no throttling, i.e., maximum supported PCIe
Link Speed.
Link: https://lore.kernel.org/r/20241018144755.7875-9-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
[bhelgaas: dropped data->cdev test per
https://lore.kernel.org/r/ZzRm1SJTwEMRsAr8@wunner.de]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org> # From the cooling device interface perspective
|
|
Currently, PCIe Link Speeds are adjusted by custom code rather than in a
common function provided in PCI core. The PCIe bandwidth controller
(bwctrl) introduces an in-kernel API, pcie_set_target_speed(), to set PCIe
Link Speed.
Convert Target Speed quirk to use the new API. The Target Speed quirk runs
very early when bwctrl is not yet probed for a Port and can also run later
when bwctrl is already setup for the Port, which requires the per port
mutex (set_speed_mutex) to be only taken if the bwctrl setup is already
complete.
The new API is also intended to be used in an upcoming commit that adds a
thermal cooling device to throttle PCIe bandwidth when thermal thresholds
are reached.
The PCIe bandwidth control procedure is as follows. The highest speed
supported by the Port and the PCIe device which is not higher than the
requested speed is selected and written into the Target Link Speed in the
Link Control 2 Register. Then bandwidth controller retrains the PCIe Link.
Bandwidth Notifications enable the cur_bus_speed in the struct pci_bus to
keep track PCIe Link Speed changes. While Bandwidth Notifications should
also be generated when bandwidth controller alters the PCIe Link Speed, a
few platforms do not deliver LMBS interrupt after Link Training as
expected. Thus, after changing the Link Speed, bandwidth controller makes
additional read for the Link Status Register to ensure cur_bus_speed is
consistent with the new PCIe Link Speed.
Link: https://lore.kernel.org/r/20241018144755.7875-8-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
[bhelgaas: squash devm_mutex_init() error checking from
https://lore.kernel.org/r/20241030163139.2111689-1-andriy.shevchenko@linux.intel.com,
drop export of pcie_set_target_speed()]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
This mostly reverts the commit b4c7d2076b4e ("PCI/LINK: Remove bandwidth
notification"). An upcoming commit extends this driver building PCIe
bandwidth controller on top of it.
PCIe bandwidth notifications were first added in the commit e8303bb7a75c
("PCI/LINK: Report degraded links via link bandwidth notification") but
later had to be removed. The significant changes compared with the old
bandwidth notification driver include:
1) Don't print the notifications into kernel log, just keep the Link
Speed cached in struct pci_bus updated. While somewhat unfortunate,
the log spam was the source of complaints that eventually lead to
the removal of the bandwidth notifications driver (see the links
below for further information).
2) Besides the Link Bandwidth Management Interrupt, also enable Link
Autonomous Bandwidth Interrupt to cover the other source of bandwidth
changes.
3) Handle Link Speed updates robustly. Refresh the cached Link Speed
when enabling Bandwidth Notification Interrupts, and solve the race
between Link Speed read and LBMS/LABS update in
pcie_bwnotif_irq_thread().
4) Use concurrency safe LNKCTL RMW operations.
5) The driver is now called PCIe bwctrl (bandwidth controller) instead
of just bandwidth notifications because of increased scope and
functionality within the driver.
6) Coexist with the Target Link Speed quirk in pcie_failed_link_retrain().
Provide LBMS counting API for it.
7) Tweaks to variable/functions names for consistency and length reasons.
Bandwidth Notifications enable the cur_bus_speed in the struct pci_bus to
keep track PCIe Link Speed changes.
[bhelgaas: This is based on previous work by Alexandru Gagniuc
<mr.nuke.me@gmail.com>; see e8303bb7a75c ("PCI/LINK: Report degraded links
via link bandwidth notification")]
Link: https://lore.kernel.org/r/20241018144755.7875-7-ilpo.jarvinen@linux.intel.com
Link: https://lore.kernel.org/all/20190429185611.121751-1-helgaas@kernel.org/
Link: https://lore.kernel.org/linux-pci/20190501142942.26972-1-keith.busch@intel.com/
Link: https://lore.kernel.org/linux-pci/20200115221008.GA191037@google.com/
Suggested-by: Lukas Wunner <lukas@wunner.de> # Building bwctrl on top of bwnotif
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
[bhelgaas: squash fix to drop IRQF_ONESHOT and convert to hardirq handler:
https://lore.kernel.org/r/20241115165717.15233-1-ilpo.jarvinen@linux.intel.com]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
This operation is used by alienware-wmi driver to avoid brute-forcing
operation 0x03.
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20241111183639.14726-1-kuurtb@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
WMAX_METHOD_THERMAL_INFORMATION has a *system description* operation
that outputs a buffer with the following structure:
out[0] -> Number of fans
out[1] -> Number of sensors
out[2] -> 0x00
out[3] -> Number of thermal modes
This is now used by create_thermal_profile() to retrieve available thermal
codes instead of brute-forcing every ID.
Tested on an Alienware x15 R1. Verified by checking ACPI tables of
supported models.
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20241111183623.14691-1-kuurtb@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Adds support to Alienware x17 R2
Tested-by: Samith Castro <SamithNarayam@hotmail.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20241111183609.14653-1-kuurtb@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Adds thermal + gmode quirk to:
- Dell G15 5510
- Dell G15 5511
- Dell G15 5515
- Dell G3 3500
- Dell G3 3590
- Dell G5 5500
Adds thermal quirk to:
- Alienware m18 R2
- Alienware m17 R5 AMD
Support for these models was manually verified by reading their
respective ACPI tables.
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20241111183546.14617-1-kuurtb@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
alienware_quirks[] entries are now ordered alphabetically
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20241111183520.14573-1-kuurtb@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
This reverts commit 74e1006430a5377228e49310f6d915628609929e.
This causes a regression in the workload selection.
A more extensive fix is being worked on.
For now, revert.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3618
Fixes: 74e1006430a5 ("drm/amd/pm: correct the workload setting")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
cocci report a double assignment warning.'wcss->version' was assigned
twice in 'q6v5_wcss_probe()'.
Signed-off-by: Yuesong Li <liyuesong@vivo.com>
Link: https://lore.kernel.org/r/20240823065546.3371378-1-liyuesong@vivo.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
