summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-08-21bnxt_en: Fix double DMA unmapping for XDP_REDIRECTSomnath Kotur
Remove the dma_unmap_page_attrs() call in the driver's XDP_REDIRECT code path. This should have been removed when we let the page pool handle the DMA mapping. This bug causes the warning: WARNING: CPU: 7 PID: 59 at drivers/iommu/dma-iommu.c:1198 iommu_dma_unmap_page+0xd5/0x100 CPU: 7 PID: 59 Comm: ksoftirqd/7 Tainted: G W 6.8.0-1010-gcp #11-Ubuntu Hardware name: Dell Inc. PowerEdge R7525/0PYVT1, BIOS 2.15.2 04/02/2024 RIP: 0010:iommu_dma_unmap_page+0xd5/0x100 Code: 89 ee 48 89 df e8 cb f2 69 ff 48 83 c4 08 5b 41 5c 41 5d 41 5e 41 5f 5d 31 c0 31 d2 31 c9 31 f6 31 ff 45 31 c0 e9 ab 17 71 00 <0f> 0b 48 83 c4 08 5b 41 5c 41 5d 41 5e 41 5f 5d 31 c0 31 d2 31 c9 RSP: 0018:ffffab1fc0597a48 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff99ff838280c8 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffab1fc0597a78 R08: 0000000000000002 R09: ffffab1fc0597c1c R10: ffffab1fc0597cd3 R11: ffff99ffe375acd8 R12: 00000000e65b9000 R13: 0000000000000050 R14: 0000000000001000 R15: 0000000000000002 FS: 0000000000000000(0000) GS:ffff9a06efb80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000565c34c37210 CR3: 00000005c7e3e000 CR4: 0000000000350ef0 ? show_regs+0x6d/0x80 ? __warn+0x89/0x150 ? iommu_dma_unmap_page+0xd5/0x100 ? report_bug+0x16a/0x190 ? handle_bug+0x51/0xa0 ? exc_invalid_op+0x18/0x80 ? iommu_dma_unmap_page+0xd5/0x100 ? iommu_dma_unmap_page+0x35/0x100 dma_unmap_page_attrs+0x55/0x220 ? bpf_prog_4d7e87c0d30db711_xdp_dispatcher+0x64/0x9f bnxt_rx_xdp+0x237/0x520 [bnxt_en] bnxt_rx_pkt+0x640/0xdd0 [bnxt_en] __bnxt_poll_work+0x1a1/0x3d0 [bnxt_en] bnxt_poll+0xaa/0x1e0 [bnxt_en] __napi_poll+0x33/0x1e0 net_rx_action+0x18a/0x2f0 Fixes: 578fcfd26e2a ("bnxt_en: Let the page pool manage the DMA mapping") Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20240820203415.168178-1-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-21Merge branch 'ipv6-fix-possible-uaf-in-output-paths'Jakub Kicinski
Eric Dumazet says: ==================== ipv6: fix possible UAF in output paths First patch fixes an issue spotted by syzbot, and the two other patches fix error paths after skb_expand_head() adoption. ==================== Link: https://patch.msgid.link/20240820160859.3786976-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-21ipv6: prevent possible UAF in ip6_xmit()Eric Dumazet
If skb_expand_head() returns NULL, skb has been freed and the associated dst/idev could also have been freed. We must use rcu_read_lock() to prevent a possible UAF. Fixes: 0c9f227bee11 ("ipv6: use skb_expand_head in ip6_xmit") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Vasily Averin <vasily.averin@linux.dev> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20240820160859.3786976-4-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-21ipv6: fix possible UAF in ip6_finish_output2()Eric Dumazet
If skb_expand_head() returns NULL, skb has been freed and associated dst/idev could also have been freed. We need to hold rcu_read_lock() to make sure the dst and associated idev are alive. Fixes: 5796015fa968 ("ipv6: allocate enough headroom in ip6_finish_output2()") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Vasily Averin <vasily.averin@linux.dev> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20240820160859.3786976-3-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-21ipv6: prevent UAF in ip6_send_skb()Eric Dumazet
syzbot reported an UAF in ip6_send_skb() [1] After ip6_local_out() has returned, we no longer can safely dereference rt, unless we hold rcu_read_lock(). A similar issue has been fixed in commit a688caa34beb ("ipv6: take rcu lock in rawv6_send_hdrinc()") Another potential issue in ip6_finish_output2() is handled in a separate patch. [1] BUG: KASAN: slab-use-after-free in ip6_send_skb+0x18d/0x230 net/ipv6/ip6_output.c:1964 Read of size 8 at addr ffff88806dde4858 by task syz.1.380/6530 CPU: 1 UID: 0 PID: 6530 Comm: syz.1.380 Not tainted 6.11.0-rc3-syzkaller-00306-gdf6cbc62cc9b #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:93 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:119 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 kasan_report+0x143/0x180 mm/kasan/report.c:601 ip6_send_skb+0x18d/0x230 net/ipv6/ip6_output.c:1964 rawv6_push_pending_frames+0x75c/0x9e0 net/ipv6/raw.c:588 rawv6_sendmsg+0x19c7/0x23c0 net/ipv6/raw.c:926 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x1a6/0x270 net/socket.c:745 sock_write_iter+0x2dd/0x400 net/socket.c:1160 do_iter_readv_writev+0x60a/0x890 vfs_writev+0x37c/0xbb0 fs/read_write.c:971 do_writev+0x1b1/0x350 fs/read_write.c:1018 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f936bf79e79 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f936cd7f038 EFLAGS: 00000246 ORIG_RAX: 0000000000000014 RAX: ffffffffffffffda RBX: 00007f936c115f80 RCX: 00007f936bf79e79 RDX: 0000000000000001 RSI: 0000000020000040 RDI: 0000000000000004 RBP: 00007f936bfe7916 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 00007f936c115f80 R15: 00007fff2860a7a8 </TASK> Allocated by task 6530: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 unpoison_slab_object mm/kasan/common.c:312 [inline] __kasan_slab_alloc+0x66/0x80 mm/kasan/common.c:338 kasan_slab_alloc include/linux/kasan.h:201 [inline] slab_post_alloc_hook mm/slub.c:3988 [inline] slab_alloc_node mm/slub.c:4037 [inline] kmem_cache_alloc_noprof+0x135/0x2a0 mm/slub.c:4044 dst_alloc+0x12b/0x190 net/core/dst.c:89 ip6_blackhole_route+0x59/0x340 net/ipv6/route.c:2670 make_blackhole net/xfrm/xfrm_policy.c:3120 [inline] xfrm_lookup_route+0xd1/0x1c0 net/xfrm/xfrm_policy.c:3313 ip6_dst_lookup_flow+0x13e/0x180 net/ipv6/ip6_output.c:1257 rawv6_sendmsg+0x1283/0x23c0 net/ipv6/raw.c:898 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x1a6/0x270 net/socket.c:745 ____sys_sendmsg+0x525/0x7d0 net/socket.c:2597 ___sys_sendmsg net/socket.c:2651 [inline] __sys_sendmsg+0x2b0/0x3a0 net/socket.c:2680 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 45: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 kasan_save_free_info+0x40/0x50 mm/kasan/generic.c:579 poison_slab_object+0xe0/0x150 mm/kasan/common.c:240 __kasan_slab_free+0x37/0x60 mm/kasan/common.c:256 kasan_slab_free include/linux/kasan.h:184 [inline] slab_free_hook mm/slub.c:2252 [inline] slab_free mm/slub.c:4473 [inline] kmem_cache_free+0x145/0x350 mm/slub.c:4548 dst_destroy+0x2ac/0x460 net/core/dst.c:124 rcu_do_batch kernel/rcu/tree.c:2569 [inline] rcu_core+0xafd/0x1830 kernel/rcu/tree.c:2843 handle_softirqs+0x2c4/0x970 kernel/softirq.c:554 __do_softirq kernel/softirq.c:588 [inline] invoke_softirq kernel/softirq.c:428 [inline] __irq_exit_rcu+0xf4/0x1c0 kernel/softirq.c:637 irq_exit_rcu+0x9/0x30 kernel/softirq.c:649 instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1043 [inline] sysvec_apic_timer_interrupt+0xa6/0xc0 arch/x86/kernel/apic/apic.c:1043 asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:702 Last potentially related work creation: kasan_save_stack+0x3f/0x60 mm/kasan/common.c:47 __kasan_record_aux_stack+0xac/0xc0 mm/kasan/generic.c:541 __call_rcu_common kernel/rcu/tree.c:3106 [inline] call_rcu+0x167/0xa70 kernel/rcu/tree.c:3210 refdst_drop include/net/dst.h:263 [inline] skb_dst_drop include/net/dst.h:275 [inline] nf_ct_frag6_queue net/ipv6/netfilter/nf_conntrack_reasm.c:306 [inline] nf_ct_frag6_gather+0xb9a/0x2080 net/ipv6/netfilter/nf_conntrack_reasm.c:485 ipv6_defrag+0x2c8/0x3c0 net/ipv6/netfilter/nf_defrag_ipv6_hooks.c:67 nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline] nf_hook_slow+0xc3/0x220 net/netfilter/core.c:626 nf_hook include/linux/netfilter.h:269 [inline] __ip6_local_out+0x6fa/0x800 net/ipv6/output_core.c:143 ip6_local_out+0x26/0x70 net/ipv6/output_core.c:153 ip6_send_skb+0x112/0x230 net/ipv6/ip6_output.c:1959 rawv6_push_pending_frames+0x75c/0x9e0 net/ipv6/raw.c:588 rawv6_sendmsg+0x19c7/0x23c0 net/ipv6/raw.c:926 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x1a6/0x270 net/socket.c:745 sock_write_iter+0x2dd/0x400 net/socket.c:1160 do_iter_readv_writev+0x60a/0x890 Fixes: 0625491493d9 ("ipv6: ip6_push_pending_frames() should increment IPSTATS_MIB_OUTDISCARDS") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20240820160859.3786976-2-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-21netpoll: do not export netpoll_poll_[disable|enable]()Eric Dumazet
netpoll_poll_disable() and netpoll_poll_enable() are only used from core networking code, there is no need to export them. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20240820162053.3870927-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-21selftests: mlxsw: ethtool_lanes: Source ethtool lib from correct pathIdo Schimmel
Source the ethtool library from the correct path and avoid the following error: ./ethtool_lanes.sh: line 14: ./../../../net/forwarding/ethtool_lib.sh: No such file or directory Fixes: 40d269c000bd ("selftests: forwarding: Move several selftests") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/2112faff02e536e1ac14beb4c2be09c9574b90ae.1724150067.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-21udp: fix receiving fraglist GSO packetsFelix Fietkau
When assembling fraglist GSO packets, udp4_gro_complete does not set skb->csum_start, which makes the extra validation in __udp_gso_segment fail. Fixes: 89add40066f9 ("net: drop bad gso csum_start and offset in virtio_net_hdr") Signed-off-by: Felix Fietkau <nbd@nbd.name> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20240819150621.59833-1-nbd@nbd.name Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-20Merge branch 'mptcp-pm-fix-ids-not-being-reusable'Jakub Kicinski
Matthieu Baerts says: ==================== mptcp: pm: fix IDs not being reusable Here are more fixes for the MPTCP in-kernel path-manager. In this series, the fixes are around the endpoint IDs not being reusable for on-going connections when re-creating endpoints with previously used IDs. - Patch 1 fixes this case for endpoints being used to send ADD_ADDR. Patch 2 validates this fix. The issue is present since v5.10. - Patch 3 fixes this case for endpoints being used to establish new subflows. Patch 4 validates this fix. The issue is present since v5.10. - Patch 5 fixes this case when all endpoints are flushed. Patch 6 validates this fix. The issue is present since v5.13. - Patch 7 removes a helper that is confusing, and introduced in v5.10. It helps simplifying the next patches. - Patch 8 makes sure a 'subflow' counter is only decremented when removing a 'subflow' endpoint. Can be backported up to v5.13. - Patch 9 is similar, but for a 'signal' counter. Can be backported up to v5.10. - Patch 10 checks the last max accepted ADD_ADDR limit before accepting new ADD_ADDR. For v5.10 as well. - Patch 11 removes a wrong restriction for the userspace PM, added during a refactoring in v6.5. - Patch 12 makes sure the fullmesh mode sets the ID 0 when a new subflow using the source address of the initial subflow is created. Patch 13 covers this case. This issue is present since v5.15. - Patch 14 avoid possible UaF when selecting an address from the endpoints list. ==================== Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-0-38035d40de5b@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-20mptcp: pm: avoid possible UaF when selecting endpMatthieu Baerts (NGI0)
select_local_address() and select_signal_address() both select an endpoint entry from the list inside an RCU protected section, but return a reference to it, to be read later on. If the entry is dereferenced after the RCU unlock, reading info could cause a Use-after-Free. A simple solution is to copy the required info while inside the RCU protected section to avoid any risk of UaF later. The address ID might need to be modified later to handle the ID0 case later, so a copy seems OK to deal with. Reported-by: Paolo Abeni <pabeni@redhat.com> Closes: https://lore.kernel.org/45cd30d3-7710-491c-ae4d-a1368c00beb1@redhat.com Fixes: 01cacb00b35c ("mptcp: add netlink-based PM") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-14-38035d40de5b@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-20selftests: mptcp: join: validate fullmesh endp on 1st sfMatthieu Baerts (NGI0)
This case was not covered, and the wrong ID was set before the previous commit. The rest is not modified, it is just that it will increase the code coverage. The right address ID can be verified by looking at the packet traces. We could automate that using Netfilter with some cBPF code for example, but that's always a bit cryptic. Packetdrill seems better fitted for that. Fixes: 4f49d63352da ("selftests: mptcp: add fullmesh testcases") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-13-38035d40de5b@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-20mptcp: pm: fullmesh: select the right ID laterMatthieu Baerts (NGI0)
When reacting upon the reception of an ADD_ADDR, the in-kernel PM first looks for fullmesh endpoints. If there are some, it will pick them, using their entry ID. It should set the ID 0 when using the endpoint corresponding to the initial subflow, it is a special case imposed by the MPTCP specs. Note that msk->mpc_endpoint_id might not be set when receiving the first ADD_ADDR from the server. So better to compare the addresses. Fixes: 1a0d6136c5f0 ("mptcp: local addresses fullmesh") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-12-38035d40de5b@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-20mptcp: pm: only in-kernel cannot have entries with ID 0Matthieu Baerts (NGI0)
The ID 0 is specific per MPTCP connections. The per netns entries cannot have this special ID 0 then. But that's different for the userspace PM where the entries are per connection, they can then use this special ID 0. Fixes: f40be0db0b76 ("mptcp: unify pm get_flags_and_ifindex_by_id") Cc: stable@vger.kernel.org Acked-by: Geliang Tang <geliang@kernel.org> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-11-38035d40de5b@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-20mptcp: pm: check add_addr_accept_max before accepting new ADD_ADDRMatthieu Baerts (NGI0)
The limits might have changed in between, it is best to check them before accepting new ADD_ADDR. Fixes: d0876b2284cf ("mptcp: add the incoming RM_ADDR support") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-10-38035d40de5b@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-20mptcp: pm: only decrement add_addr_accepted for MPJ reqMatthieu Baerts (NGI0)
Adding the following warning ... WARN_ON_ONCE(msk->pm.add_addr_accepted == 0) ... before decrementing the add_addr_accepted counter helped to find a bug when running the "remove single subflow" subtest from the mptcp_join.sh selftest. Removing a 'subflow' endpoint will first trigger a RM_ADDR, then the subflow closure. Before this patch, and upon the reception of the RM_ADDR, the other peer will then try to decrement this add_addr_accepted. That's not correct because the attached subflows have not been created upon the reception of an ADD_ADDR. A way to solve that is to decrement the counter only if the attached subflow was an MP_JOIN to a remote id that was not 0, and initiated by the host receiving the RM_ADDR. Fixes: d0876b2284cf ("mptcp: add the incoming RM_ADDR support") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-9-38035d40de5b@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-20mptcp: pm: only mark 'subflow' endp as availableMatthieu Baerts (NGI0)
Adding the following warning ... WARN_ON_ONCE(msk->pm.local_addr_used == 0) ... before decrementing the local_addr_used counter helped to find a bug when running the "remove single address" subtest from the mptcp_join.sh selftests. Removing a 'signal' endpoint will trigger the removal of all subflows linked to this endpoint via mptcp_pm_nl_rm_addr_or_subflow() with rm_type == MPTCP_MIB_RMSUBFLOW. This will decrement the local_addr_used counter, which is wrong in this case because this counter is linked to 'subflow' endpoints, and here it is a 'signal' endpoint that is being removed. Now, the counter is decremented, only if the ID is being used outside of mptcp_pm_nl_rm_addr_or_subflow(), only for 'subflow' endpoints, and if the ID is not 0 -- local_addr_used is not taking into account these ones. This marking of the ID as being available, and the decrement is done no matter if a subflow using this ID is currently available, because the subflow could have been closed before. Fixes: 06faa2271034 ("mptcp: remove multi addresses and subflows in PM") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-8-38035d40de5b@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-20mptcp: pm: remove mptcp_pm_remove_subflow()Matthieu Baerts (NGI0)
This helper is confusing. It is in pm.c, but it is specific to the in-kernel PM and it cannot be used by the userspace one. Also, it simply calls one in-kernel specific function with the PM lock, while the similar mptcp_pm_remove_addr() helper requires the PM lock. What's left is the pr_debug(), which is not that useful, because a similar one is present in the only function called by this helper: mptcp_pm_nl_rm_subflow_received() After these modifications, this helper can be marked as 'static', and the lock can be taken only once in mptcp_pm_flush_addrs_and_subflows(). Note that it is not a bug fix, but it will help backporting the following commits. Fixes: 0ee4261a3681 ("mptcp: implement mptcp_pm_remove_subflow") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-7-38035d40de5b@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-20selftests: mptcp: join: test for flush/re-add endpointsMatthieu Baerts (NGI0)
After having flushed endpoints that didn't cause the creation of new subflows, it is important to check endpoints can be re-created, re-using previously used IDs. Before the previous commit, the client would not have been able to re-create the subflow that was previously rejected. The 'Fixes' tag here below is the same as the one from the previous commit: this patch here is not fixing anything wrong in the selftests, but it validates the previous fix for an issue introduced by this commit ID. Fixes: 06faa2271034 ("mptcp: remove multi addresses and subflows in PM") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-6-38035d40de5b@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-20mptcp: pm: re-using ID of unused flushed subflowsMatthieu Baerts (NGI0)
If no subflows are attached to the 'subflow' endpoints that are being flushed, the corresponding addr IDs will not be marked as available again. Mark all ID as being available when flushing all the 'subflow' endpoints, and reset local_addr_used counter to cover these cases. Note that mptcp_pm_remove_addrs_and_subflows() helper is only called for flushing operations, not to remove a specific set of addresses and subflows. Fixes: 06faa2271034 ("mptcp: remove multi addresses and subflows in PM") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-5-38035d40de5b@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-20selftests: mptcp: join: check re-using ID of closed subflowMatthieu Baerts (NGI0)
This test extends "delete and re-add" to validate the previous commit. A new 'subflow' endpoint is added, but the subflow request will be rejected. The result is that no subflow will be established from this address. Later, the endpoint is removed and re-added after having cleared the firewall rule. Before the previous commit, the client would not have been able to create this new subflow. While at it, extra checks have been added to validate the expected numbers of MPJ and RM_ADDR. The 'Fixes' tag here below is the same as the one from the previous commit: this patch here is not fixing anything wrong in the selftests, but it validates the previous fix for an issue introduced by this commit ID. Fixes: b6c08380860b ("mptcp: remove addr and subflow in PM netlink") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-4-38035d40de5b@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-20mptcp: pm: re-using ID of unused removed subflowsMatthieu Baerts (NGI0)
If no subflow is attached to the 'subflow' endpoint that is being removed, the addr ID will not be marked as available again. Mark the linked ID as available when removing the 'subflow' endpoint if no subflow is attached to it. While at it, the local_addr_used counter is decremented if the ID was marked as being used to reflect the reality, but also to allow adding new endpoints after that. Fixes: b6c08380860b ("mptcp: remove addr and subflow in PM netlink") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-3-38035d40de5b@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-20selftests: mptcp: join: check re-using ID of unused ADD_ADDRMatthieu Baerts (NGI0)
This test extends "delete re-add signal" to validate the previous commit. An extra address is announced by the server, but this address cannot be used by the client. The result is that no subflow will be established to this address. Later, the server will delete this extra endpoint, and set a new one, with a valid address, but re-using the same ID. Before the previous commit, the server would not have been able to announce this new address. While at it, extra checks have been added to validate the expected numbers of MPJ, ADD_ADDR and RM_ADDR. The 'Fixes' tag here below is the same as the one from the previous commit: this patch here is not fixing anything wrong in the selftests, but it validates the previous fix for an issue introduced by this commit ID. Fixes: b6c08380860b ("mptcp: remove addr and subflow in PM netlink") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-2-38035d40de5b@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-20mptcp: pm: re-using ID of unused removed ADD_ADDRMatthieu Baerts (NGI0)
If no subflow is attached to the 'signal' endpoint that is being removed, the addr ID will not be marked as available again. Mark the linked ID as available when removing the address entry from the list to cover this case. Fixes: b6c08380860b ("mptcp: remove addr and subflow in PM netlink") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-1-38035d40de5b@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-20netem: fix return value if duplicate enqueue failsStephen Hemminger
There is a bug in netem_enqueue() introduced by commit 5845f706388a ("net: netem: fix skb length BUG_ON in __skb_to_sgvec") that can lead to a use-after-free. This commit made netem_enqueue() always return NET_XMIT_SUCCESS when a packet is duplicated, which can cause the parent qdisc's q.qlen to be mistakenly incremented. When this happens qlen_notify() may be skipped on the parent during destruction, leaving a dangling pointer for some classful qdiscs like DRR. There are two ways for the bug happen: - If the duplicated packet is dropped by rootq->enqueue() and then the original packet is also dropped. - If rootq->enqueue() sends the duplicated packet to a different qdisc and the original packet is dropped. In both cases NET_XMIT_SUCCESS is returned even though no packets are enqueued at the netem qdisc. The fix is to defer the enqueue of the duplicate packet until after the original packet has been guaranteed to return NET_XMIT_SUCCESS. Fixes: 5845f706388a ("net: netem: fix skb length BUG_ON in __skb_to_sgvec") Reported-by: Budimir Markovic <markovicbudimir@gmail.com> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20240819175753.5151-1-stephen@networkplumber.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-20net: dsa: mv88e6xxx: Fix out-of-bound accessJoseph Huang
If an ATU violation was caused by a CPU Load operation, the SPID could be larger than DSA_MAX_PORTS (the size of mv88e6xxx_chip.ports[] array). Fixes: 75c05a74e745 ("net: dsa: mv88e6xxx: Fix counting of ATU violations") Signed-off-by: Joseph Huang <Joseph.Huang@garmin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20240819235251.1331763-1-Joseph.Huang@garmin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-20net: dsa: microchip: fix PTP config failure when using multiple portsMartin Whitaker
When performing the port_hwtstamp_set operation, ptp_schedule_worker() will be called if hardware timestamoing is enabled on any of the ports. When using multiple ports for PTP, port_hwtstamp_set is executed for each port. When called for the first time ptp_schedule_worker() returns 0. On subsequent calls it returns 1, indicating the worker is already scheduled. Currently the ksz driver treats 1 as an error and fails to complete the port_hwtstamp_set operation, thus leaving the timestamping configuration for those ports unchanged. This patch fixes this by ignoring the ptp_schedule_worker() return value. Cc: stable@vger.kernel.org Link: https://lore.kernel.org/7aae307a-35ca-4209-a850-7b2749d40f90@martin-whitaker.me.uk Fixes: bb01ad30570b0 ("net: dsa: microchip: ptp: manipulating absolute time using ptp hw clock") Signed-off-by: Martin Whitaker <foss@martin-whitaker.me.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com> Link: https://patch.msgid.link/20240817094141.3332-1-foss@martin-whitaker.me.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-20igb: cope with large MAX_SKB_FRAGSPaolo Abeni
Sabrina reports that the igb driver does not cope well with large MAX_SKB_FRAG values: setting MAX_SKB_FRAG to 45 causes payload corruption on TX. An easy reproducer is to run ssh to connect to the machine. With MAX_SKB_FRAGS=17 it works, with MAX_SKB_FRAGS=45 it fails. This has been reported originally in https://bugzilla.redhat.com/show_bug.cgi?id=2265320 The root cause of the issue is that the driver does not take into account properly the (possibly large) shared info size when selecting the ring layout, and will try to fit two packets inside the same 4K page even when the 1st fraglist will trump over the 2nd head. Address the issue by checking if 2K buffers are insufficient. Fixes: 3948b05950fd ("net: introduce a config option to tweak MAX_SKB_FRAGS") Reported-by: Jan Tluka <jtluka@redhat.com> Reported-by: Jirka Hladky <jhladky@redhat.com> Reported-by: Sabrina Dubroca <sd@queasysnail.net> Tested-by: Sabrina Dubroca <sd@queasysnail.net> Tested-by: Corinna Vinschen <vinschen@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Corinna Vinschen <vinschen@redhat.com> Link: https://patch.msgid.link/20240816152034.1453285-1-vinschen@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-20cxgb4: add forgotten u64 ivlan cast before shiftNikolay Kuratov
It is done everywhere in cxgb4 code, e.g. in is_filter_exact_match() There is no reason it should not be done here Found by Linux Verification Center (linuxtesting.org) with SVACE Signed-off-by: Nikolay Kuratov <kniv@yandex-team.ru> Cc: stable@vger.kernel.org Fixes: 12b276fbf6e0 ("cxgb4: add support to create hash filters") Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20240819075408.92378-1-kniv@yandex-team.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-20dpaa2-switch: Fix error checking in dpaa2_switch_seed_bp()Dan Carpenter
The dpaa2_switch_add_bufs() function returns the number of bufs that it was able to add. It returns BUFS_PER_CMD (7) for complete success or a smaller number if there are not enough pages available. However, the error checking is looking at the total number of bufs instead of the number which were added on this iteration. Thus the error checking only works correctly for the first iteration through the loop and subsequent iterations are always counted as a success. Fix this by checking only the bufs added in the current iteration. Fixes: 0b1b71370458 ("staging: dpaa2-switch: handle Rx path on control interface") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> Link: https://patch.msgid.link/eec27f30-b43f-42b6-b8ee-04a6f83423b6@stanley.mountain Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-20Merge branch 'bonding-fix-xfrm-offload-bugs'Paolo Abeni
Nikolay Aleksandrov says: ==================== bonding: fix xfrm offload bugs I noticed these problems while reviewing a bond xfrm patch recently. The fixes are straight-forward, please review carefully the last one because it has side-effects. This set has passed bond's selftests and my custom bond stress tests which crash without these fixes. Note the first patch is not critical, but it simplifies the next fix. ==================== Link: https://patch.msgid.link/20240816114813.326645-1-razor@blackwall.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-20bonding: fix xfrm state handling when clearing active slaveNikolay Aleksandrov
If the active slave is cleared manually the xfrm state is not flushed. This leads to xfrm add/del imbalance and adding the same state multiple times. For example when the device cannot handle anymore states we get: [ 1169.884811] bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA because it's filled with the same state after multiple active slave clearings. This change also has a few nice side effects: user-space gets a notification for the change, the old device gets its mac address and promisc/mcast adjusted properly. Fixes: 18cb261afd7b ("bonding: support hardware encryption offload to slaves") Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-20bonding: fix xfrm real_dev null pointer dereferenceNikolay Aleksandrov
We shouldn't set real_dev to NULL because packets can be in transit and xfrm might call xdo_dev_offload_ok() in parallel. All callbacks assume real_dev is set. Example trace: kernel: BUG: unable to handle page fault for address: 0000000000001030 kernel: bond0: (slave eni0np1): making interface the new active one kernel: #PF: supervisor write access in kernel mode kernel: #PF: error_code(0x0002) - not-present page kernel: PGD 0 P4D 0 kernel: Oops: 0002 [#1] PREEMPT SMP kernel: CPU: 4 PID: 2237 Comm: ping Not tainted 6.7.7+ #12 kernel: Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014 kernel: RIP: 0010:nsim_ipsec_offload_ok+0xc/0x20 [netdevsim] kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA kernel: Code: e0 0f 0b 48 83 7f 38 00 74 de 0f 0b 48 8b 47 08 48 8b 37 48 8b 78 40 e9 b2 e5 9a d7 66 90 0f 1f 44 00 00 48 8b 86 80 02 00 00 <83> 80 30 10 00 00 01 b8 01 00 00 00 c3 0f 1f 80 00 00 00 00 0f 1f kernel: bond0: (slave eni0np1): making interface the new active one kernel: RSP: 0018:ffffabde81553b98 EFLAGS: 00010246 kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA kernel: kernel: RAX: 0000000000000000 RBX: ffff9eb404e74900 RCX: ffff9eb403d97c60 kernel: RDX: ffffffffc090de10 RSI: ffff9eb404e74900 RDI: ffff9eb3c5de9e00 kernel: RBP: ffff9eb3c0a42000 R08: 0000000000000010 R09: 0000000000000014 kernel: R10: 7974203030303030 R11: 3030303030303030 R12: 0000000000000000 kernel: R13: ffff9eb3c5de9e00 R14: ffffabde81553cc8 R15: ffff9eb404c53000 kernel: FS: 00007f2a77a3ad00(0000) GS:ffff9eb43bd00000(0000) knlGS:0000000000000000 kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 kernel: CR2: 0000000000001030 CR3: 00000001122ab000 CR4: 0000000000350ef0 kernel: bond0: (slave eni0np1): making interface the new active one kernel: Call Trace: kernel: <TASK> kernel: ? __die+0x1f/0x60 kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA kernel: ? page_fault_oops+0x142/0x4c0 kernel: ? do_user_addr_fault+0x65/0x670 kernel: ? kvm_read_and_reset_apf_flags+0x3b/0x50 kernel: bond0: (slave eni0np1): making interface the new active one kernel: ? exc_page_fault+0x7b/0x180 kernel: ? asm_exc_page_fault+0x22/0x30 kernel: ? nsim_bpf_uninit+0x50/0x50 [netdevsim] kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA kernel: ? nsim_ipsec_offload_ok+0xc/0x20 [netdevsim] kernel: bond0: (slave eni0np1): making interface the new active one kernel: bond_ipsec_offload_ok+0x7b/0x90 [bonding] kernel: xfrm_output+0x61/0x3b0 kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA kernel: ip_push_pending_frames+0x56/0x80 Fixes: 18cb261afd7b ("bonding: support hardware encryption offload to slaves") Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-20bonding: fix null pointer deref in bond_ipsec_offload_okNikolay Aleksandrov
We must check if there is an active slave before dereferencing the pointer. Fixes: 18cb261afd7b ("bonding: support hardware encryption offload to slaves") Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-20bonding: fix bond_ipsec_offload_ok return typeNikolay Aleksandrov
Fix the return type which should be bool. Fixes: 955b785ec6b3 ("bonding: fix suspicious RCU usage in bond_ipsec_offload_ok()") Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-20ip6_tunnel: Fix broken GROThomas Bogendoerfer
GRO code checks for matching layer 2 headers to see, if packet belongs to the same flow and because ip6 tunnel set dev->hard_header_len this check fails in cases, where it shouldn't. To fix this don't set hard_header_len, but use needed_headroom like ipv4/ip_tunnel.c does. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Link: https://patch.msgid.link/20240815151419.109864-1-tbogendoerfer@suse.de Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-19kcm: Serialise kcm_sendmsg() for the same socket.Kuniyuki Iwashima
syzkaller reported UAF in kcm_release(). [0] The scenario is 1. Thread A builds a skb with MSG_MORE and sets kcm->seq_skb. 2. Thread A resumes building skb from kcm->seq_skb but is blocked by sk_stream_wait_memory() 3. Thread B calls sendmsg() concurrently, finishes building kcm->seq_skb and puts the skb to the write queue 4. Thread A faces an error and finally frees skb that is already in the write queue 5. kcm_release() does double-free the skb in the write queue When a thread is building a MSG_MORE skb, another thread must not touch it. Let's add a per-sk mutex and serialise kcm_sendmsg(). [0]: BUG: KASAN: slab-use-after-free in __skb_unlink include/linux/skbuff.h:2366 [inline] BUG: KASAN: slab-use-after-free in __skb_dequeue include/linux/skbuff.h:2385 [inline] BUG: KASAN: slab-use-after-free in __skb_queue_purge_reason include/linux/skbuff.h:3175 [inline] BUG: KASAN: slab-use-after-free in __skb_queue_purge include/linux/skbuff.h:3181 [inline] BUG: KASAN: slab-use-after-free in kcm_release+0x170/0x4c8 net/kcm/kcmsock.c:1691 Read of size 8 at addr ffff0000ced0fc80 by task syz-executor329/6167 CPU: 1 PID: 6167 Comm: syz-executor329 Tainted: G B 6.8.0-rc5-syzkaller-g9abbc24128bc #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024 Call trace: dump_backtrace+0x1b8/0x1e4 arch/arm64/kernel/stacktrace.c:291 show_stack+0x2c/0x3c arch/arm64/kernel/stacktrace.c:298 __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd0/0x124 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:377 [inline] print_report+0x178/0x518 mm/kasan/report.c:488 kasan_report+0xd8/0x138 mm/kasan/report.c:601 __asan_report_load8_noabort+0x20/0x2c mm/kasan/report_generic.c:381 __skb_unlink include/linux/skbuff.h:2366 [inline] __skb_dequeue include/linux/skbuff.h:2385 [inline] __skb_queue_purge_reason include/linux/skbuff.h:3175 [inline] __skb_queue_purge include/linux/skbuff.h:3181 [inline] kcm_release+0x170/0x4c8 net/kcm/kcmsock.c:1691 __sock_release net/socket.c:659 [inline] sock_close+0xa4/0x1e8 net/socket.c:1421 __fput+0x30c/0x738 fs/file_table.c:376 ____fput+0x20/0x30 fs/file_table.c:404 task_work_run+0x230/0x2e0 kernel/task_work.c:180 exit_task_work include/linux/task_work.h:38 [inline] do_exit+0x618/0x1f64 kernel/exit.c:871 do_group_exit+0x194/0x22c kernel/exit.c:1020 get_signal+0x1500/0x15ec kernel/signal.c:2893 do_signal+0x23c/0x3b44 arch/arm64/kernel/signal.c:1249 do_notify_resume+0x74/0x1f4 arch/arm64/kernel/entry-common.c:148 exit_to_user_mode_prepare arch/arm64/kernel/entry-common.c:169 [inline] exit_to_user_mode arch/arm64/kernel/entry-common.c:178 [inline] el0_svc+0xac/0x168 arch/arm64/kernel/entry-common.c:713 el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:730 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:598 Allocated by task 6166: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x40/0x78 mm/kasan/common.c:68 kasan_save_alloc_info+0x70/0x84 mm/kasan/generic.c:626 unpoison_slab_object mm/kasan/common.c:314 [inline] __kasan_slab_alloc+0x74/0x8c mm/kasan/common.c:340 kasan_slab_alloc include/linux/kasan.h:201 [inline] slab_post_alloc_hook mm/slub.c:3813 [inline] slab_alloc_node mm/slub.c:3860 [inline] kmem_cache_alloc_node+0x204/0x4c0 mm/slub.c:3903 __alloc_skb+0x19c/0x3d8 net/core/skbuff.c:641 alloc_skb include/linux/skbuff.h:1296 [inline] kcm_sendmsg+0x1d3c/0x2124 net/kcm/kcmsock.c:783 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] sock_sendmsg+0x220/0x2c0 net/socket.c:768 splice_to_socket+0x7cc/0xd58 fs/splice.c:889 do_splice_from fs/splice.c:941 [inline] direct_splice_actor+0xec/0x1d8 fs/splice.c:1164 splice_direct_to_actor+0x438/0xa0c fs/splice.c:1108 do_splice_direct_actor fs/splice.c:1207 [inline] do_splice_direct+0x1e4/0x304 fs/splice.c:1233 do_sendfile+0x460/0xb3c fs/read_write.c:1295 __do_sys_sendfile64 fs/read_write.c:1362 [inline] __se_sys_sendfile64 fs/read_write.c:1348 [inline] __arm64_sys_sendfile64+0x160/0x3b4 fs/read_write.c:1348 __invoke_syscall arch/arm64/kernel/syscall.c:37 [inline] invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:51 el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:136 do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:155 el0_svc+0x54/0x168 arch/arm64/kernel/entry-common.c:712 el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:730 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:598 Freed by task 6167: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x40/0x78 mm/kasan/common.c:68 kasan_save_free_info+0x5c/0x74 mm/kasan/generic.c:640 poison_slab_object+0x124/0x18c mm/kasan/common.c:241 __kasan_slab_free+0x3c/0x78 mm/kasan/common.c:257 kasan_slab_free include/linux/kasan.h:184 [inline] slab_free_hook mm/slub.c:2121 [inline] slab_free mm/slub.c:4299 [inline] kmem_cache_free+0x15c/0x3d4 mm/slub.c:4363 kfree_skbmem+0x10c/0x19c __kfree_skb net/core/skbuff.c:1109 [inline] kfree_skb_reason+0x240/0x6f4 net/core/skbuff.c:1144 kfree_skb include/linux/skbuff.h:1244 [inline] kcm_release+0x104/0x4c8 net/kcm/kcmsock.c:1685 __sock_release net/socket.c:659 [inline] sock_close+0xa4/0x1e8 net/socket.c:1421 __fput+0x30c/0x738 fs/file_table.c:376 ____fput+0x20/0x30 fs/file_table.c:404 task_work_run+0x230/0x2e0 kernel/task_work.c:180 exit_task_work include/linux/task_work.h:38 [inline] do_exit+0x618/0x1f64 kernel/exit.c:871 do_group_exit+0x194/0x22c kernel/exit.c:1020 get_signal+0x1500/0x15ec kernel/signal.c:2893 do_signal+0x23c/0x3b44 arch/arm64/kernel/signal.c:1249 do_notify_resume+0x74/0x1f4 arch/arm64/kernel/entry-common.c:148 exit_to_user_mode_prepare arch/arm64/kernel/entry-common.c:169 [inline] exit_to_user_mode arch/arm64/kernel/entry-common.c:178 [inline] el0_svc+0xac/0x168 arch/arm64/kernel/entry-common.c:713 el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:730 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:598 The buggy address belongs to the object at ffff0000ced0fc80 which belongs to the cache skbuff_head_cache of size 240 The buggy address is located 0 bytes inside of freed 240-byte region [ffff0000ced0fc80, ffff0000ced0fd70) The buggy address belongs to the physical page: page:00000000d35f4ae4 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x10ed0f flags: 0x5ffc00000000800(slab|node=0|zone=2|lastcpupid=0x7ff) page_type: 0xffffffff() raw: 05ffc00000000800 ffff0000c1cbf640 fffffdffc3423100 dead000000000004 raw: 0000000000000000 00000000000c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff0000ced0fb80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff0000ced0fc00: fb fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc >ffff0000ced0fc80: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff0000ced0fd00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fc fc ffff0000ced0fd80: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb Fixes: ab7ac4eb9832 ("kcm: Kernel Connection Multiplexor module") Reported-by: syzbot+b72d86aa5df17ce74c60@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=b72d86aa5df17ce74c60 Tested-by: syzbot+b72d86aa5df17ce74c60@syzkaller.appspotmail.com Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20240815220437.69511-1-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-19net: mctp: test: Use correct skb for route input checkJeremy Kerr
In the MCTP route input test, we're routing one skb, then (when delivery is expected) checking the resulting routed skb. However, we're currently checking the original skb length, rather than the routed skb. Check the routed skb instead; the original will have been freed at this point. Fixes: 8892c0490779 ("mctp: Add route input to socket tests") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/kernel-janitors/4ad204f0-94cf-46c5-bdab-49592addf315@kili.mountain/ Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20240816-mctp-kunit-skb-fix-v1-1-3c367ac89c27@codeconstruct.com.au Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-19tcp: prevent concurrent execution of tcp_sk_exit_batchFlorian Westphal
Its possible that two threads call tcp_sk_exit_batch() concurrently, once from the cleanup_net workqueue, once from a task that failed to clone a new netns. In the latter case, error unwinding calls the exit handlers in reverse order for the 'failed' netns. tcp_sk_exit_batch() calls tcp_twsk_purge(). Problem is that since commit b099ce2602d8 ("net: Batch inet_twsk_purge"), this function picks up twsk in any dying netns, not just the one passed in via exit_batch list. This means that the error unwind of setup_net() can "steal" and destroy timewait sockets belonging to the exiting netns. This allows the netns exit worker to proceed to call WARN_ON_ONCE(!refcount_dec_and_test(&net->ipv4.tcp_death_row.tw_refcount)); without the expected 1 -> 0 transition, which then splats. At same time, error unwind path that is also running inet_twsk_purge() will splat as well: WARNING: .. at lib/refcount.c:31 refcount_warn_saturate+0x1ed/0x210 ... refcount_dec include/linux/refcount.h:351 [inline] inet_twsk_kill+0x758/0x9c0 net/ipv4/inet_timewait_sock.c:70 inet_twsk_deschedule_put net/ipv4/inet_timewait_sock.c:221 inet_twsk_purge+0x725/0x890 net/ipv4/inet_timewait_sock.c:304 tcp_sk_exit_batch+0x1c/0x170 net/ipv4/tcp_ipv4.c:3522 ops_exit_list+0x128/0x180 net/core/net_namespace.c:178 setup_net+0x714/0xb40 net/core/net_namespace.c:375 copy_net_ns+0x2f0/0x670 net/core/net_namespace.c:508 create_new_namespaces+0x3ea/0xb10 kernel/nsproxy.c:110 ... because refcount_dec() of tw_refcount unexpectedly dropped to 0. This doesn't seem like an actual bug (no tw sockets got lost and I don't see a use-after-free) but as erroneous trigger of debug check. Add a mutex to force strict ordering: the task that calls tcp_twsk_purge() blocks other task from doing final _dec_and_test before mutex-owner has removed all tw sockets of dying netns. Fixes: e9bd0cca09d1 ("tcp: Don't allocate tcp_death_row outside of struct netns_ipv4.") Reported-by: syzbot+8ea26396ff85d23a8929@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/0000000000003a5292061f5e4e19@google.com/ Link: https://lore.kernel.org/netdev/20240812140104.GA21559@breakpoint.cc/ Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Jason Xing <kerneljasonxing@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20240812222857.29837-1-fw@strlen.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-19Merge branch 'selftests-udpgro-fixes'David S. Miller
Hangbin Liu says: ==================== selftests: Fix udpgro failures There are 2 issues for the current udpgro test. The first one is the testing doesn't record all the failures, which may report pass but the test actually failed. e.g. https://netdev-3.bots.linux.dev/vmksft-net/results/725661/45-udpgro-sh/stdout The other one is after commit d7db7775ea2e ("net: veth: do not manipulate GRO when using XDP"), there is no need to load xdp program to enable GRO on veth device. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2024-08-19selftests: udpgro: no need to load xdp for groHangbin Liu
After commit d7db7775ea2e ("net: veth: do not manipulate GRO when using XDP"), there is no need to load XDP program to enable GRO. On the other hand, the current test is failed due to loading the XDP program. e.g. # selftests: net: udpgro.sh # ipv4 # no GRO ok # no GRO chk cmsg ok # GRO ./udpgso_bench_rx: recv: bad packet len, got 1472, expected 14720 # # failed [...] # bad GRO lookup ok # multiple GRO socks ./udpgso_bench_rx: recv: bad packet len, got 1452, expected 14520 # # ./udpgso_bench_rx: recv: bad packet len, got 1452, expected 14520 # # failed ok 1 selftests: net: udpgro.sh After fix, all the test passed. # ./udpgro.sh ipv4 no GRO ok [...] multiple GRO socks ok Fixes: d7db7775ea2e ("net: veth: do not manipulate GRO when using XDP") Reported-by: Yi Chen <yiche@redhat.com> Closes: https://issues.redhat.com/browse/RHEL-53858 Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-08-19selftests: udpgro: report error when receive failedHangbin Liu
Currently, we only check the latest senders's exit code. If the receiver report failed, it is not recoreded. Fix it by checking the exit code of all the involved processes. Before: bad GRO lookup ok multiple GRO socks ./udpgso_bench_rx: recv: bad packet len, got 1452, expected 14520 ./udpgso_bench_rx: recv: bad packet len, got 1452, expected 14520 failed $ echo $? 0 After: bad GRO lookup ok multiple GRO socks ./udpgso_bench_rx: recv: bad packet len, got 1452, expected 14520 ./udpgso_bench_rx: recv: bad packet len, got 1452, expected 14520 failed $ echo $? 1 Fixes: 3327a9c46352 ("selftests: add functionals test for UDP GRO") Suggested-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-08-16Merge tag 'for-net-2024-08-15' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - MGMT: Add error handling to pair_device() - HCI: Invert LE State quirk to be opt-out rather then opt-in - hci_core: Fix LE quote calculation - SMP: Fix assumption of Central always being Initiator * tag 'for-net-2024-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: MGMT: Add error handling to pair_device() Bluetooth: SMP: Fix assumption of Central always being Initiator Bluetooth: hci_core: Fix LE quote calculation Bluetooth: HCI: Invert LE State quirk to be opt-out rather then opt-in ==================== Link: https://patch.msgid.link/20240815171950.1082068-1-luiz.dentz@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-16tc-testing: don't access non-existent variable on exceptionSimon Horman
Since commit 255c1c7279ab ("tc-testing: Allow test cases to be skipped") the variable test_ordinal doesn't exist in call_pre_case(). So it should not be accessed when an exception occurs. This resolves the following splat: ... During handling of the above exception, another exception occurred: Traceback (most recent call last): File ".../tdc.py", line 1028, in <module> main() File ".../tdc.py", line 1022, in main set_operation_mode(pm, parser, args, remaining) File ".../tdc.py", line 966, in set_operation_mode catresults = test_runner_serial(pm, args, alltests) File ".../tdc.py", line 642, in test_runner_serial (index, tsr) = test_runner(pm, args, alltests) File ".../tdc.py", line 536, in test_runner res = run_one_test(pm, args, index, tidx) File ".../tdc.py", line 419, in run_one_test pm.call_pre_case(tidx) File ".../tdc.py", line 146, in call_pre_case print('test_ordinal is {}'.format(test_ordinal)) NameError: name 'test_ordinal' is not defined Fixes: 255c1c7279ab ("tc-testing: Allow test cases to be skipped") Signed-off-by: Simon Horman <horms@kernel.org> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Link: https://patch.msgid.link/20240815-tdc-test-ordinal-v1-1-0255c122a427@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-16Merge branch 'mlx5-misc-fixes-2024-08-15'Jakub Kicinski
Tariq Toukan says: ==================== mlx5 misc fixes 2024-08-15 This patchset provides misc bug fixes from the team to the mlx5 driver. ==================== Link: https://patch.msgid.link/20240815071611.2211873-1-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-16net/mlx5: Fix IPsec RoCE MPV trace callPatrisious Haddad
Prevent the call trace below from happening, by not allowing IPsec creation over a slave, if master device doesn't support IPsec. WARNING: CPU: 44 PID: 16136 at kernel/locking/rwsem.c:240 down_read+0x75/0x94 Modules linked in: esp4_offload esp4 act_mirred act_vlan cls_flower sch_ingress mlx5_vdpa vringh vhost_iotlb vdpa mst_pciconf(OE) nfsv3 nfs_acl nfs lockd grace fscache netfs xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4 nft_compat nft_counter nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 rfkill cuse fuse rpcrdma sunrpc rdma_ucm ib_srpt ib_isert iscsi_target_mod target_core_mod ib_umad ib_iser libiscsi scsi_transport_iscsi rdma_cm ib_ipoib iw_cm ib_cm ipmi_ssif intel_rapl_msr intel_rapl_common amd64_edac edac_mce_amd kvm_amd kvm irqbypass crct10dif_pclmul crc32_pclmul mlx5_ib ghash_clmulni_intel sha1_ssse3 dell_smbios ib_uverbs aesni_intel crypto_simd dcdbas wmi_bmof dell_wmi_descriptor cryptd pcspkr ib_core acpi_ipmi sp5100_tco ccp i2c_piix4 ipmi_si ptdma k10temp ipmi_devintf ipmi_msghandler acpi_power_meter acpi_cpufreq ext4 mbcache jbd2 sd_mod t10_pi sg mgag200 drm_kms_helper syscopyarea sysfillrect mlx5_core sysimgblt fb_sys_fops cec ahci libahci mlxfw drm pci_hyperv_intf libata tg3 sha256_ssse3 tls megaraid_sas i2c_algo_bit psample wmi dm_mirror dm_region_hash dm_log dm_mod [last unloaded: mst_pci] CPU: 44 PID: 16136 Comm: kworker/44:3 Kdump: loaded Tainted: GOE 5.15.0-20240509.el8uek.uek7_u3_update_v6.6_ipsec_bf.x86_64 #2 Hardware name: Dell Inc. PowerEdge R7525/074H08, BIOS 2.0.3 01/15/2021 Workqueue: events xfrm_state_gc_task RIP: 0010:down_read+0x75/0x94 Code: 00 48 8b 45 08 65 48 8b 14 25 80 fc 01 00 83 e0 02 48 09 d0 48 83 c8 01 48 89 45 08 5d 31 c0 89 c2 89 c6 89 c7 e9 cb 88 3b 00 <0f> 0b 48 8b 45 08 a8 01 74 b2 a8 02 75 ae 48 89 c2 48 83 ca 02 f0 RSP: 0018:ffffb26387773da8 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffffa08b658af900 RCX: 0000000000000001 RDX: 0000000000000000 RSI: ff886bc5e1366f2f RDI: 0000000000000000 RBP: ffffa08b658af940 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffa0a9bfb31540 R13: ffffa0a9bfb37900 R14: 0000000000000000 R15: ffffa0a9bfb37905 FS: 0000000000000000(0000) GS:ffffa0a9bfb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055a45ed814e8 CR3: 000000109038a000 CR4: 0000000000350ee0 Call Trace: <TASK> ? show_trace_log_lvl+0x1d6/0x2f9 ? show_trace_log_lvl+0x1d6/0x2f9 ? mlx5_devcom_for_each_peer_begin+0x29/0x60 [mlx5_core] ? down_read+0x75/0x94 ? __warn+0x80/0x113 ? down_read+0x75/0x94 ? report_bug+0xa4/0x11d ? handle_bug+0x35/0x8b ? exc_invalid_op+0x14/0x75 ? asm_exc_invalid_op+0x16/0x1b ? down_read+0x75/0x94 ? down_read+0xe/0x94 mlx5_devcom_for_each_peer_begin+0x29/0x60 [mlx5_core] mlx5_ipsec_fs_roce_tx_destroy+0xb1/0x130 [mlx5_core] tx_destroy+0x1b/0xc0 [mlx5_core] tx_ft_put+0x53/0xc0 [mlx5_core] mlx5e_xfrm_free_state+0x45/0x90 [mlx5_core] ___xfrm_state_destroy+0x10f/0x1a2 xfrm_state_gc_task+0x81/0xa9 process_one_work+0x1f1/0x3c6 worker_thread+0x53/0x3e4 ? process_one_work.cold+0x46/0x3c kthread+0x127/0x144 ? set_kthread_struct+0x60/0x52 ret_from_fork+0x22/0x2d </TASK> ---[ end trace 5ef7896144d398e1 ]--- Fixes: dfbd229abeee ("net/mlx5: Configure IPsec steering for egress RoCEv2 MPV traffic") Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Patrisious Haddad <phaddad@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/20240815071611.2211873-5-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-16net/mlx5e: XPS, Fix oversight of Multi-PF Netdev changesCarolina Jubran
The offending commit overlooked the Multi-PF Netdev changes. Revert mlx5e_set_default_xps_cpumasks to incorporate Multi-PF Netdev changes. Fixes: bcee093751f8 ("net/mlx5e: Modifying channels number and updating TX queues") Signed-off-by: Carolina Jubran <cjubran@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/20240815071611.2211873-4-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-16net/mlx5e: SHAMPO, Release in progress headersDragos Tatulea
The change in the fixes tag cleaned up too much: it removed the part that was releasing header pages that were posted via UMR but haven't been acknowledged yet on the ICOSQ. This patch corrects this omission by setting the bits between pi and ci to on when shutting down a queue with SHAMPO. To be consistent with the Striding RQ code, this action is done in mlx5e_free_rx_missing_descs(). Fixes: e839ac9a89cb ("net/mlx5e: SHAMPO, Simplify header page release in teardown") Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/20240815071611.2211873-3-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-16net/mlx5e: SHAMPO, Fix page leakDragos Tatulea
When SHAMPO is used, a receive queue currently almost always leaks one page on shutdown. A page has MLX5E_SHAMPO_WQ_HEADER_PER_PAGE (8) headers. These headers are tracked in the SHAMPO bitmap. Each page is released when the last header index in the group is processed. During header allocation, there can be leftovers from a page that will be used in a subsequent allocation. This is normally fine, except for the following scenario (simplified a bit): 1) Allocate N new page fragments, showing only the relevant last 4 fragments: 0: new page 1: new page 2: new page 3: new page 4: page from previous allocation 5: page from previous allocation 6: page from previous allocation 7: page from previous allocation 2) NAPI processes header indices 4-7 because they are the oldest allocated. Bit 7 will be set to 0. 3) Receive queue shutdown occurs. All the remaining bits are being iterated on to release the pages. But the page assigned to header indices 0-3 will not be freed due to what happened in step 2. This patch fixes the issue by making sure that on allocation, header fragments are always allocated in groups of MLX5E_SHAMPO_WQ_HEADER_PER_PAGE so that there is never a partial page left over between allocations. A more appropriate fix would be a refactoring of mlx5e_alloc_rx_hd_mpwqe() and mlx5e_build_shampo_hd_umr(). But this refactoring is too big for net. It will be targeted for net-next. Fixes: e839ac9a89cb ("net/mlx5e: SHAMPO, Simplify header page release in teardown") Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/20240815071611.2211873-2-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-16Merge branch 'vln-ocelot-fixes'David S. Miller
Vladimir Oltean says: ==================== VLAN fixes for Ocelot driver This is a collection of patches I've gathered over the past several months. Patches 1-6/14 are supporting patches for selftests. Patch 9/14 fixes PTP TX from a VLAN upper of a VLAN-aware bridge port when using the "ocelot-8021q" tagging protocol. Patch 7/14 is its supporting selftest. Patch 10/14 fixes the QoS class used by PTP in the same case as above. It is hard to quantify - there is no selftest. Patch 11/14 fixes potential data corruption during PTP TX in the same case as above. Again, there is no selftest. Patch 13/14 fixes RX in the same case as above - 8021q upper of a VLAN-aware bridge port, with the "ocelot-8021q" tagging protocol. Patch 12/14 is a supporting patch for this in the DSA core, and 7/14 is also its selftest. Patch 14/14 ensures that VLAN-aware bridges offloaded to Ocelot only react to the ETH_P_8021Q TPID, and treat absolutely everything else as VLAN-untagged, including ETH_P_8021AD. Patch 8/14 is the supporting selftest. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2024-08-16net: mscc: ocelot: treat 802.1ad tagged traffic as 802.1Q-untaggedVladimir Oltean
I was revisiting the topic of 802.1ad treatment in the Ocelot switch [0] and realized that not only is its basic VLAN classification pipeline improper for offloading vlan_protocol 802.1ad bridges, but also improper for offloading regular 802.1Q bridges already. Namely, 802.1ad-tagged traffic should be treated as VLAN-untagged by bridged ports, but this switch treats it as if it was 802.1Q-tagged with the same VID as in the 802.1ad header. This is markedly different to what the Linux bridge expects; see the "other_tpid()" function in tools/testing/selftests/net/forwarding/bridge_vlan_aware.sh. An idea came to me that the VCAP IS1 TCAM is more powerful than I'm giving it credit for, and that it actually overwrites the classified VID before the VLAN Table lookup takes place. In other words, it can be used even to save a packet from being dropped on ingress due to VLAN membership. Add a sophisticated TCAM rule hardcoded into the driver to force the switch to behave like a Linux bridge with vlan_filtering 1 vlan_protocol 802.1Q. Regarding the lifetime of the filter: eventually the bridge will disappear, and vlan_filtering on the port will be restored to 0 for standalone mode. Then the filter will be deleted. [0]: https://lore.kernel.org/netdev/20201009122947.nvhye4hvcha3tljh@skbuf/ Fixes: 7142529f1688 ("net: mscc: ocelot: add VLAN filtering") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-11 02:24:02 +0000