summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-08-23cifs: check for NULL session passwordJeff Layton
It's possible for a cifsSesInfo struct to have a NULL password, so we need to check for that prior to running strncmp on it. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-08-23missing changes during ntlmv2/ntlmssp auth and signShirish Pargaonkar
Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-08-23Merge branch 'misc' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'misc' of git://git.kernel.dk/linux-2.6-block: ipheth: add support for iPhone 4
2010-08-23Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ASoC: i.MX ssi: use SSI_STCCR in synchronous mode ALSA: hda - Add support for Lenovo S10-3t ALSA: hda - Fix stream and channel-ids codec-bus wide ALSA: hda - Fix conflict of sticky PCM parameter in HDMI codecs ALSA: intel8x0: Mute External Amplifier by default for ThinkPad X31 ALSA: hda - Fix build error with CONFIG_PROC_FS=n ALSA: hda - Add support for IDT 92HD89XX codecs
2010-08-23Merge branch 'fix/asoc' into for-linusTakashi Iwai
2010-08-23ASoC: i.MX ssi: use SSI_STCCR in synchronous modeSascha Hauer
In synchronous mode the SSI_SRCCR values are ignored. Instead SSI_STCCR must be used for both receiving and transmitting. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-23block: switch s390 tape_block and mg_disk to elevator_change()Jens Axboe
Now that we have this API, switch the two in-kernel users to it. Resolves an oops introduced by commit 1abec4fdbb142e3ccb6ce99832fae42129134a96. Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-23block: add function call to switch the IO scheduler from a driverJens Axboe
Currently drivers must do an elevator_exit() + elevator_init() to switch IO schedulers. There are a few problems with this: - Since commit 1abec4fdbb142e3ccb6ce99832fae42129134a96, elevator_init() requires a zeroed out q->elevator pointer. The two existing in-kernel users don't do that. - It will only work at initialization time, since using the above two-staged construct does not properly quisce the queue. So add elevator_change() which takes care of this, and convert the elv_iosched_store() sysfs interface to use this helper as well. Reported-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Reported-by: Kevin Vigor <kevin@vigor.nu> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-23powerpc/47x: Add an isync before the tlbivax instructionDave Kleikamp
Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2010-08-23powerpc/4xx: Index interrupt stacks by physical cpuDave Kleikamp
The interrupt stacks need to be indexed by the physical cpu since the critical, debug and machine check handlers use the contents of SPRN_PIR to index the critirq_ctx, dbgirq_ctx, and mcheckirq_ctx arrays. Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2010-08-23powerpc/47x: Remove redundant line from cputable.cDave Kleikamp
There are two entries for .cpu_user_features in arch/powerpc/kernel/cputable.c. Remove the one that doesn't belong Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2010-08-23fs/bio-integrity.c: return -ENOMEM on kmalloc failureAndrew Morton
Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-23powerpc/47x: Make sure mcsr is cleared before enabling machine check interruptsDave Kleikamp
Clear the machine check syndrom register before enabling machine check interrupts. The initial state of the tlb can lead to parity errors being flagged early after a cold boot. Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2010-08-23bio-integrity.c: remove dependency on __GFP_NOFAILDavid Rientjes
The kmalloc() in bio_integrity_prep() is failable, so remove __GFP_NOFAIL from its mask. Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-23powerpc/4xx: Device tree update for the 460ex DWC SATARupjyoti Sarmah
Device tree update for the Applied micro processor 460ex on-chip SATA Signed-off-by: Rupjyoti Sarmah <rsarmah@amcc.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2010-08-23xen: pvhvm: make it clearer that XEN_UNPLUG_* define bits in a bitfieldIan Campbell
by defining in terms of (1<<N). XEN_UNPLUG_UNNECESSARY and XEN_UNPLUG_NEVER are only used within the kernel and are not defined as a bit on the unplug IO port. Therefore use a bit which is outside the potentially valid range of the 16 bit IO port. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Acked-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Acked-by: Stefano Stabellini <Stefano.Stabellini@eu.citrix.com>
2010-08-23xen: pvhvm: rename xen_emul_unplug=ignore to =unnnecessaryIan Campbell
It is not immediately clear what this option causes to become ignored. The actual meaning is that it is not necessary to unplug the emulated devices to safely use the PV ones, even if the platform does not support the unplug protocol. (pressumably the user will only add this option if they have ensured that their domain configuration is safe). I think xen_emul_unplug=unnecessary better captures this. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Acked-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Acked-by: Stefano Stabellini <Stefano.Stabellini@eu.citrix.com>
2010-08-23xen: pvhvm: allow user to request no emulated device unplugIan Campbell
this allows the user to disable pvhvm and revert to emulated devices in case of a system misconfiguration (e.g. initramfs with only emulated drivers in it). Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Acked-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Acked-by: Stefano Stabellini <Stefano.Stabellini@eu.citrix.com>
2010-08-23ipheth: add support for iPhone 4Jens Axboe
This adds support for the iPhone 4 to the ipheth driver. Acked-by: Diego Giagio <diego@giagio.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-23BLOCK: fix bio.bi_rw handlingJiri Slaby
Return of the bi_rw tests is no longer bool after commit 74450be1. But results of such tests are stored in bools. This doesn't fit in there for some compilers (gcc 4.5 here), so either use !! magic to get real bools or use ulong where the result is assigned somewhere. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Christoph Hellwig <hch@lst.de> Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-23block: put dev->kobj in blk_register_queue fail pathXiaotian Feng
kernel needs to kobject_put on dev->kobj if elv_register_queue fails. Signed-off-by: Xiaotian Feng <dfeng@redhat.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Nikanth Karthikesan <knikanth@suse.de> Cc: David Teigland <teigland@redhat.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-23cciss: handle allocation failureDan Carpenter
If kmalloc() fails then cleanup and return failure (-1). Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-23cfq-iosched: Documentation help for new tunablesVivek Goyal
Some documentation to provide help with tunables. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Acked-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-23cfq-iosched: blktrace print per slice sector statsVivek Goyal
o Divyesh had gotten rid of this code in the past. I want to re-introduce it back as it helps me a lot during debugging. Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Reviewed-by: Divyesh Shah <dpshah@google.com> Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-23cfq-iosched: Implement tunable group_idleVivek Goyal
o Implement a new tunable group_idle, which allows idling on the group instead of a cfq queue. Hence one can set slice_idle = 0 and not idle on the individual queues but idle on the group. This way on fast storage we can get fairness between groups at the same time overall throughput improves. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Acked-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-23cfq-iosched: Do group share accounting in IOPS when slice_idle=0Vivek Goyal
o Implement another CFQ mode where we charge group in terms of number of requests dispatched instead of measuring the time. Measuring in terms of time is not possible when we are driving deeper queue depths and there are requests from multiple cfq queues in the request queue. o This mode currently gets activated if one sets slice_idle=0 and associated disk supports NCQ. Again the idea is that on an NCQ disk with idling disabled most of the queues will dispatch 1 or more requests and then cfq queue expiry happens and we don't have a way to measure time. So start providing fairness in terms of IOPS. o Currently IOPS mode works only with cfq group scheduling. CFQ is following different scheduling algorithms for queue and group scheduling. These IOPS stats are used only for group scheduling hence in non-croup mode nothing should change. o For CFQ group scheduling one can disable slice idling so that we don't idle on queue and drive deeper request queue depths (achieving better throughput), at the same time group idle is enabled so one should get service differentiation among groups. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Acked-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-23cfq-iosched: Do not idle if slice_idle=0Vivek Goyal
Do not idle either on cfq queue or service tree if slice_idle=0. User does not want any queue or service tree idling. Currently even if slice_idle=0, we were waiting for request to finish before expiring the queue and that can lead to lower queue depths. Acked-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-23workqueue: mark lock acquisition on worker_maybe_bind_and_lock()Namhyung Kim
worker_maybe_bind_and_lock() actually grabs gcwq->lock but was missing proper annotation. Add it. So this patch will remove following sparse warnings: kernel/workqueue.c:1214:13: warning: context imbalance in 'worker_maybe_bind_and_lock' - wrong count at exit arch/x86/include/asm/irqflags.h:44:9: warning: context imbalance in 'worker_rebind_fn' - unexpected unlock kernel/workqueue.c:1991:17: warning: context imbalance in 'rescuer_thread' - unexpected unlock Signed-off-by: Namhyung Kim <namhyung@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2010-08-23workqueue: annotate lock context changeNamhyung Kim
Some of internal functions called within gcwq->lock context releases and regrabs the lock but were missing proper annotations. Add it. Signed-off-by: Namhyung Kim <namhyung@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2010-08-23cciss: disable doorbell reset on reset_devicesStephen M. Cameron
The doorbell reset initially appears to work correctly, the controller resets, comes up, some i/o can even be done, but on at least some Smart Arrays in some servers, it eventually causes a subsequent controller lockup due to some kind of PCIe error, and kdump can end up leaving the root filesystem in an unbootable state. For this reason, until the problem is fixed, or at least isolated to certain hardware enough to be avoided, the doorbell reset should not be used at all. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-23blkio: Fix return code for mkdir callsCiju Rajan K
If the cgroup hierarchy for blkio control groups is deeper than two levels, kernel should not allow the creation of further levels. mkdir system call does not except EINVAL as a return value. This patch replaces EINVAL with more appropriate EPERM Signed-off-by: Ciju Rajan K <ciju@linux.vnet.ibm.com> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-23mutex: Improve the scalability of optimistic spinningTim Chen
There is a scalability issue for current implementation of optimistic mutex spin in the kernel. It is found on a 8 node 64 core Nehalem-EX system (HT mode). The intention of the optimistic mutex spin is to busy wait and spin on a mutex if the owner of the mutex is running, in the hope that the mutex will be released soon and be acquired, without the thread trying to acquire mutex going to sleep. However, when we have a large number of threads, contending for the mutex, we could have the mutex grabbed by other thread, and then another ……, and we will keep spinning, wasting cpu cycles and adding to the contention. One possible fix is to quit spinning and put the current thread on wait-list if mutex lock switch to a new owner while we spin, indicating heavy contention (see the patch included). I did some testing on a 8 socket Nehalem-EX system with a total of 64 cores. Using Ingo's test-mutex program that creates/delete files with 256 threads (http://lkml.org/lkml/2006/1/8/50) , I see the following speed up after putting in the mutex spin fix: ./mutex-test V 256 10 Ops/sec 2.6.34 62864 With fix 197200 Repeating the test with Aim7 fserver workload, again there is a speed up with the fix: Jobs/min 2.6.34 91657 With fix 149325 To look at the impact on the distribution of mutex acquisition time, I collected the mutex acquisition time on Aim7 fserver workload with some instrumentation. The average acquisition time is reduced by 48% and number of contentions reduced by 32%. #contentions Time to acquire mutex (cycles) 2.6.34 72973 44765791 With fix 49210 23067129 The histogram of mutex acquisition time is listed below. The acquisition time is in 2^bin cycles. We see that without the fix, the acquisition time is mostly around 2^26 cycles. With the fix, we the distribution get spread out a lot more towards the lower cycles, starting from 2^13. However, there is an increase of the tail distribution with the fix at 2^28 and 2^29 cycles. It seems a small price to pay for the reduced average acquisition time and also getting the cpu to do useful work. Mutex acquisition time distribution (acq time = 2^bin cycles): 2.6.34 With Fix bin #occurrence % #occurrence % 11 2 0.00% 120 0.24% 12 10 0.01% 790 1.61% 13 14 0.02% 2058 4.18% 14 86 0.12% 3378 6.86% 15 393 0.54% 4831 9.82% 16 710 0.97% 4893 9.94% 17 815 1.12% 4667 9.48% 18 790 1.08% 5147 10.46% 19 580 0.80% 6250 12.70% 20 429 0.59% 6870 13.96% 21 311 0.43% 1809 3.68% 22 255 0.35% 2305 4.68% 23 317 0.44% 916 1.86% 24 610 0.84% 233 0.47% 25 3128 4.29% 95 0.19% 26 63902 87.69% 122 0.25% 27 619 0.85% 286 0.58% 28 0 0.00% 3536 7.19% 29 0 0.00% 903 1.83% 30 0 0.00% 0 0.00% I've done similar experiments with 2.6.35 kernel on smaller boxes as well. One is on a dual-socket Westmere box (12 cores total, with HT). Another experiment is on an old dual-socket Core 2 box (4 cores total, no HT) On the 12-core Westmere box, I see a 250% increase for Ingo's mutex-test program with my mutex patch but no significant difference in aim7's fserver workload. On the 4-core Core 2 box, I see the difference with the patch for both mutex-test and aim7 fserver are negligible. So far, it seems like the patch has not caused regression on smaller systems. Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: <stable@kernel.org> # .35.x LKML-Reference: <1282168827.9542.72.camel@schen9-DESK> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-08-23watchdog: Don't throttle the watchdogPeter Zijlstra
Stephane reported that when the machine locks up, the regular ticks, which are responsible to resetting the throttle count, stop too. Hence the NMI watchdog can end up being throttled before it reports on the locked up state, and we end up being sad.. Cure this by having the watchdog overflow reset its own throttle count. Reported-by: Stephane Eranian <eranian@google.com> Tested-by: Stephane Eranian <eranian@google.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1282215916.1926.4696.camel@laptop> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-08-23Blackfin: wire up new fanotify/prlimit64 syscallsMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-08-23ADI/ASoC: add MAINTAINERS entriesMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-08-23Blackfin: fix hweight breakageMike Frysinger
The recent commit to add constant optimization to hweight implicitly broke the Blackfin arch. Seems we were missed when all the other arches were fixed with renames. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-08-23Merge branch 'fix/hda' into for-linusTakashi Iwai
2010-08-23ALSA: hda - Add support for Lenovo S10-3tJerone Young
This patch adds quirk for the Lenovo S10-3t so the headphone & microphone jacks will now work. Signed-off-by: Jerone Young <jerone.young@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-08-22isdn/avm: fix build when PCMCIA is not enabledRandy Dunlap
Why wouldn't kconfig symbol ISDN_DRV_AVMB1_B1PCMCIA also depend on PCMCIA? Fix build for PCMCIA not enabled: ERROR: "b1_free_card" [drivers/isdn/hardware/avm/b1pcmcia.ko] undefined! ERROR: "b1ctl_proc_fops" [drivers/isdn/hardware/avm/b1pcmcia.ko] undefined! ERROR: "b1_reset_ctr" [drivers/isdn/hardware/avm/b1pcmcia.ko] undefined! ERROR: "b1_load_firmware" [drivers/isdn/hardware/avm/b1pcmcia.ko] undefined! ERROR: "b1_send_message" [drivers/isdn/hardware/avm/b1pcmcia.ko] undefined! ERROR: "b1_release_appl" [drivers/isdn/hardware/avm/b1pcmcia.ko] undefined! ERROR: "b1_register_appl" [drivers/isdn/hardware/avm/b1pcmcia.ko] undefined! ERROR: "b1_getrevision" [drivers/isdn/hardware/avm/b1pcmcia.ko] undefined! ERROR: "b1_detect" [drivers/isdn/hardware/avm/b1pcmcia.ko] undefined! ERROR: "b1_interrupt" [drivers/isdn/hardware/avm/b1pcmcia.ko] undefined! ERROR: "b1_alloc_card" [drivers/isdn/hardware/avm/b1pcmcia.ko] undefined! Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Carsten Paeth <calle@calle.de> Cc: Karsten Keil <isdn@linux-pingi.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-22ceph: fix osd request lru adjustment when sending requestHenry C Chang
Fix argument order. We want to move the item to the end of the list, not change the position of the head. Signed-off-by: Henry C Chang <henry_c_chang@tcloudcomputing.com> Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-22ceph: don't improperly set dir complete when holding EXCL capSage Weil
If we hold the EXCL cap, we cannot trust the dir stats from the MDS (num files, subdirs) and must not incorrectly conclude that the directory is empty. If we do, we get can bad results from lookup (bad ENOENT) and bad readdir results. Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-22header: fix broken headers for user spaceChangli Gao
__packed is only defined in kernel space, so we should use __attribute__((packed)) for the code shared between kernel and user space. Two __attribute() annotations are replaced with __attribute__() too. Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-22Merge branch 'radix-tree' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dgc/xfsdev * 'radix-tree' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/xfsdev: radix-tree: radix_tree_range_tag_if_tagged() can set incorrect tags radix-tree: clear all tags in radix_tree_node_rcu_free
2010-08-23ARM: S5P: VMALLOC_END should be unsigned longKyungmin Park
Silences following build warning: arch/arm/mm/init.c: In function 'mem_init': arch/arm/mm/init.c:644: warning: format '%08lx' expects type 'long unsigned int', but argument 12 has type 'unsigned int' Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-08-22Linux 2.6.36-rc2Linus Torvalds
2010-08-23radix-tree: radix_tree_range_tag_if_tagged() can set incorrect tagsDave Chinner
Commit ebf8aa44beed48cd17893a83d92a4403e5f9d9e2 ("radix-tree: omplement function radix_tree_range_tag_if_tagged") does not safely set tags on on intermediate tree nodes. The code walks down the tree setting tags before it has fully resolved the path to the leaf under the assumption there will be a leaf slot with the tag set in the range it is searching. Unfortunately, this is not a valid assumption - we can abort after setting a tag on an intermediate node if we overrun the number of tags we are allowed to set in a batch, or stop scanning because we we have passed the last scan index before we reach a leaf slot with the tag we are searching for set. As a result, we can leave the function with tags set on intemediate nodes which can be tripped over later by tag-based lookups. The result of these stale tags is that lookup may end prematurely or livelock because the lookup cannot make progress. The fix for the problem involves reocrding the traversal path we take to the leaf nodes, and only propagating the tags back up the tree once the tag is set in the leaf node slot. We are already recording the path for efficient traversal, so there is no additional overhead to do the intermediately node tag setting in this manner. This fixes a radix tree lookup livelock triggered by the new writeback sync livelock avoidance code introduced in commit f446daaea9d4a420d16c606f755f3689dcb2d0ce ("mm: implement writeback livelock avoidance using page tagging"). Signed-off-by: Dave Chinner <dchinner@redhat.com> Acked-by: Jan Kara <jack@suse.cz>
2010-08-23radix-tree: clear all tags in radix_tree_node_rcu_freeDave Chinner
Commit f446daaea9d4a420d16c606f755f3689dcb2d0ce ("mm: implement writeback livelock avoidance using page tagging") introduced a new radix tree tag, increasing the number of tags in each node from 2 to 3. It did not, however, fix up the code in radix_tree_node_rcu_free() that cleans up after radix_tree_shrink() and hence could leave stray tags set in the new tag array. The result is that the livelock avoidance code added in the the above commit would hit stale tags when doing tag based lookups, resulting in livelocks when trying to traverse the tree. Fix this problem in radix_tree_node_rcu_free() so it doesn't happen again in the future by using a loop to walk all the tags up to RADIX_TREE_MAX_TAGS to clear the stray tags radix_tree_shrink() leaves behind. Signed-off-by: Dave Chinner <dchinner@redhat.com> Acked-by: Nick Piggin <npiggin@kernel.dk> Acked-by: Jan Kara <jack@suse.cz>
2010-08-22fanotify: drop duplicate pr_debug statementTvrtko Ursulin
This reminded me... you have two pr_debugs in fanotify_should_send_event which output redundant information. Maybe you intended it like that so it is selectable how much log spam you want, or if not you may want to apply this patch. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@sophos.com> Signed-off-by: Eric Paris <eparis@redhat.com>
2010-08-22fanotify: flush outstanding perm requests on group destroyEric Paris
When an fanotify listener is closing it may cause a deadlock between the listener and the original task doing an fs operation. If the original task is waiting for a permissions response it will be holding the srcu lock. The listener cannot clean up and exit until after that srcu lock is syncronized. Thus deadlock. The fix introduced here is to stop accepting new permissions events when a listener is shutting down and to grant permission for all outstanding events. Thus the original task will eventually release the srcu lock and the listener can complete shutdown. Reported-by: Andreas Gruenbacher <agruen@suse.de> Cc: Andreas Gruenbacher <agruen@suse.de> Signed-off-by: Eric Paris <eparis@redhat.com>
2010-08-22fsnotify: fix ignored mask handling between inode and vfsmount marksEric Paris
The interesting 2 list lockstep walking didn't quite work out if the inode marks only had ignores and the vfsmount list requested events. The code to shortcut list traversal would not run the inode list since it didn't have real event requests. This code forces inode list traversal when a vfsmount mark matches the event type. Maybe we could add an i_fsnotify_ignored_mask field to struct inode to get the shortcut back, but it doesn't seem worth it to grow struct inode again. I bet with the recent changes to lock the way we do now it would actually not be a major perf hit to just drop i_fsnotify_mark_mask altogether. But that is for another day. Signed-off-by: Eric Paris <eparis@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-19 16:50:55 +0000