summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-10-10libertas: call into generic suspend code before turning off powerDaniel Mack
When powering down a SDIO connected card during suspend, make sure to call into the generic lbs_suspend() function before pulling the plug. This will make sure the card is successfully deregistered from the system to avoid communication to the card starving out. Fixes: 7444a8092906 ("libertas: fix suspend and resume for SDIO connected cards") Signed-off-by: Daniel Mack <daniel@zonque.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-10-10of: unittest: Disable interrupt node tests for old world MAC systemsGuenter Roeck
On systems with OF_IMAP_OLDWORLD_MAC set in of_irq_workarounds, the devicetree interrupt parsing code is different, causing unit tests of devicetree interrupt nodes to fail. Due to a bug in unittest code, which tries to dereference an uninitialized pointer, this results in a crash. OF: /testcase-data/phandle-tests/consumer-a: arguments longer than property Unable to handle kernel paging request for data at address 0x00bc616e Faulting instruction address: 0xc08e9468 Oops: Kernel access of bad area, sig: 11 [#1] BE PREEMPT PowerMac Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 4.14.72-rc1-yocto-standard+ #1 task: cf8e0000 task.stack: cf8da000 NIP: c08e9468 LR: c08ea5bc CTR: c08ea5ac REGS: cf8dbb50 TRAP: 0300 Not tainted (4.14.72-rc1-yocto-standard+) MSR: 00001032 <ME,IR,DR,RI> CR: 82004044 XER: 00000000 DAR: 00bc616e DSISR: 40000000 GPR00: c08ea5bc cf8dbc00 cf8e0000 c13ca517 c13ca517 c13ca8a0 00000066 00000002 GPR08: 00000063 00bc614e c0b05865 000affff 82004048 00000000 c00047f0 00000000 GPR16: c0a80000 c0a9cc34 c13ca517 c0ad1134 05ffffff 000affff c0b05860 c0abeef8 GPR24: cecec278 cecec278 c0a8c4d0 c0a885e0 c13ca8a0 05ffffff c13ca8a0 c13ca517 NIP [c08e9468] device_node_gen_full_name+0x30/0x15c LR [c08ea5bc] device_node_string+0x190/0x3c8 Call Trace: [cf8dbc00] [c007f670] trace_hardirqs_on_caller+0x118/0x1fc (unreliable) [cf8dbc40] [c08ea5bc] device_node_string+0x190/0x3c8 [cf8dbcb0] [c08eb794] pointer+0x25c/0x4d0 [cf8dbd00] [c08ebcbc] vsnprintf+0x2b4/0x5ec [cf8dbd60] [c08ec00c] vscnprintf+0x18/0x48 [cf8dbd70] [c008e268] vprintk_store+0x4c/0x22c [cf8dbda0] [c008ecac] vprintk_emit+0x94/0x130 [cf8dbdd0] [c008ff54] printk+0x5c/0x6c [cf8dbe10] [c0b8ddd4] of_unittest+0x2220/0x26f8 [cf8dbea0] [c0004434] do_one_initcall+0x4c/0x184 [cf8dbf00] [c0b4534c] kernel_init_freeable+0x13c/0x1d8 [cf8dbf30] [c0004814] kernel_init+0x24/0x118 [cf8dbf40] [c0013398] ret_from_kernel_thread+0x5c/0x64 The problem was observed when running a qemu test for the g3beige machine with devicetree unittests enabled. Disable interrupt node tests on affected systems to avoid both false unittest failures and the crash. With this patch in place, unittest on the affected system passes with the following message. dt-test ### end of unittest - 144 passed, 0 failed Fixes: 53a42093d96ef ("of: Add device tree selftests") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org>
2018-10-10Merge tag 'tag-chrome-platform-fixes-for-v4.19-rc8' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform Benson writes: "chrome-platform fix for v4.19-rc8 This contains a fix to 57e94c8b974d ("mfd: cros-ec: Increase maximum mkbp event size"), which caused cros_ec based chromebooks to truncate an entire column of their built-in keyboard." * tag 'tag-chrome-platform-fixes-for-v4.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform: mfd: cros-ec: copy the whole event in get_next_event_xfer
2018-10-10Merge branch 'for-4.19-fixes' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu Dennis writes: "percpu fixes for-4.19-rc8 The new percpu allocator introduced in 4.14 had a missing free for the percpu metadata. This caused a memory leak when percpu memory is being churned resulting in the allocation and deallocation of percpu memory chunks" * 'for-4.19-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu: percpu: stop leaking bitmap metadata blocks
2018-10-10Merge tag 'gfs2-4.19.fixes2' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2 Andreas writes: "gfs2 4.19 fix: This fixes a regression introduced in commit 64bc06bb32ee "gfs2: iomap buffered write support"" * tag 'gfs2-4.19.fixes2' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: gfs2: Fix iomap buffered write support for journaled files
2018-10-10Merge tag 's390-4.19-4' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Martin writes: "s390 fixes for 4.19-rc8 Four more patches for 4.19: - Fix resume after suspend-to-disk if resume-CPU != suspend-CPU - Fix vfio-ccw check for pinned pages - Two patches to avoid a usercopy-whitelist warning in vfio-ccw" * tag 's390-4.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/cio: Fix how vfio-ccw checks pinned pages s390/cio: Refactor alloc of ccw_io_region s390/cio: Convert ccw_io_region to pointer s390/hibernate: fix error handling when suspend cpu != resume cpu
2018-10-10Merge tag 'mips_fixes_4.19_2' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Paul writes: "A few MIPS fixes for 4.19: - Avoid suboptimal placement of our VDSO when using the legacy mmap layout, which can prevent statically linked programs that were able to allocate large amounts of memory using the brk syscall prior to the introduction of our VDSO from functioning correctly. - Fix up CONFIG_CMDLINE handling for platforms which ought to ignore DT arguments but have incorrectly used them & lost other arguments since v3.16. - Fix a path in MAINTAINERS to use valid wildcards. - Fixup a regression from v4.17 in memset() for systems using CPU_DADDI_WORKAROUNDS." * tag 'mips_fixes_4.19_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: memset: Fix CPU_DADDI_WORKAROUNDS `small_fixup' regression MAINTAINERS: MIPS/LOONGSON2 ARCHITECTURE - Use the normal wildcard style MIPS: Fix CONFIG_CMDLINE handling MIPS: VDSO: Always map near top of user memory
2018-10-10MAINTAINERS: update the SELinux mailing list locationPaul Moore
Signed-off-by: Paul Moore <paul@paul-moore.com>
2018-10-09tools/bpf: use proper type and uapi perf_event.h header for libbpfYonghong Song
Use __u32 instead u32 in libbpf.c and also use uapi perf_event.h instead of tools/perf/perf-sys.h. Signed-off-by: Yonghong Song <yhs@fb.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-09Merge branch 'xdp-vlan'Alexei Starovoitov
Jesper Dangaard Brouer says: ==================== While implementing PoC building blocks for eBPF code XDP+TC that can manipulate VLANs headers, I discovered a bug in generic-XDP. The fix should be backported to stable kernels. Even-though generic-XDP was introduced in v4.12, I think the bug is not exposed until v4.14 in the mentined fixes commit. ==================== Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-09selftests/bpf: add XDP selftests for modifying and popping VLAN headersJesper Dangaard Brouer
This XDP selftest also contain a small TC-bpf component. It provoke the generic-XDP bug fixed in previous commit. The selftest itself shows how to do VLAN manipulation from XDP and TC. The test demonstrate how XDP ingress can remove a VLAN tag, and how TC egress can add back a VLAN tag. This use-case originates from a production need by ISP (kviknet.dk), who gets DSL-lines terminated as VLAN Q-in-Q tagged packets, and want to avoid having an net_device for every end-customer on the box doing the L2 to L3 termination. The test-setup is done via a veth-pair and creating two network namespaces (ns1 and ns2). The 'ns1' simulate the ISP network that are loading the BPF-progs stripping and adding VLAN IDs. The 'ns2' simulate the DSL-customer that are using VLAN tagged packets. Running the script with --interactive, will simply not call the cleanup function. This gives the effect of creating a testlab, that the users can inspect and play with. The --verbose option will simply request that the shell will print input lines as they are read, this include comments, which in effect make the comments visible docs. Reported-by: Yoel Caspersen <yoel@kviknet.dk> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-09bpf: make TC vlan bpf_helpers avail to selftestsJesper Dangaard Brouer
The helper bpf_skb_vlan_push is needed by next patch, and the helper bpf_skb_vlan_pop is added for completeness, regarding VLAN helpers. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-09net: fix generic XDP to handle if eth header was mangledJesper Dangaard Brouer
XDP can modify (and resize) the Ethernet header in the packet. There is a bug in generic-XDP, because skb->protocol and skb->pkt_type are setup before reaching (netif_receive_)generic_xdp. This bug was hit when XDP were popping VLAN headers (changing eth->h_proto), as skb->protocol still contains VLAN-indication (ETH_P_8021Q) causing invocation of skb_vlan_untag(skb), which corrupt the packet (basically popping the VLAN again). This patch catch if XDP changed eth header in such a way, that SKB fields needs to be updated. V2: on request from Song Liu, use ETH_HLEN instead of mac_len, in __skb_push() as eth_type_trans() use ETH_HLEN in paired skb_pull_inline(). Fixes: d445516966dc ("net: xdp: support xdp generic on virtual devices") Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-09Merge branch 'unsupported-map-lookup'Alexei Starovoitov
Prashant Bhole says: ==================== Currently when map a lookup fails, user space API can not make any distinction whether given key was not found or lookup is not supported by particular map. In this series we modify return value of maps which do not support lookup. Lookup on such map implementation will return -EOPNOTSUPP. bpf() syscall with BPF_MAP_LOOKUP_ELEM command will set EOPNOTSUPP errno. We also handle this error in bpftool to print appropriate message. Patch 1: adds handling of BPF_MAP_LOOKUP ELEM command of bpf syscall such that errno will set to EOPNOTSUPP when map doesn't support lookup Patch 2: Modifies the return value of map_lookup_elem() to EOPNOTSUPP for maps which do not support lookup Patch 3: Splits do_dump() in bpftool/map.c. Element printing code is moved out into new function dump_map_elem(). This was done in order to reduce deep indentation and accomodate further changes. Patch 4: Changes in bpftool to print strerror() message when lookup error is occured. This will result in appropriate message like "Operation not supported" when map doesn't support lookup. Patch 5: test_verifier: change fixup map naming convention as suggested by Alexei Patch 6: Added verifier tests to check whether verifier rejects call to bpf_map_lookup_elem from bpf program. For all map types those do not support map lookup. ==================== Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-09selftests/bpf: test_verifier, check bpf_map_lookup_elem access in bpf progPrashant Bhole
map_lookup_elem isn't supported by certain map types like: - BPF_MAP_TYPE_PROG_ARRAY - BPF_MAP_TYPE_STACK_TRACE - BPF_MAP_TYPE_XSKMAP - BPF_MAP_TYPE_SOCKMAP/BPF_MAP_TYPE_SOCKHASH Let's add verfier tests to check whether verifier prevents bpf_map_lookup_elem call on above programs from bpf program. Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-09selftests/bpf: test_verifier, change names of fixup mapsPrashant Bhole
Currently fixup map are named like fixup_map1, fixup_map2, and so on. As suggested by Alexei let's change change map names such that we can identify map type by looking at the name. This patch is basically a find and replace change: fixup_map1 -> fixup_map_hash_8b fixup_map2 -> fixup_map_hash_48b fixup_map3 -> fixup_map_hash_16b fixup_map4 -> fixup_map_array_48b Suggested-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-09tools/bpf: bpftool, print strerror when map lookup error occursPrashant Bhole
Since map lookup error can be ENOENT or EOPNOTSUPP, let's print strerror() as error message in normal and JSON output. This patch adds helper function print_entry_error() to print entry from lookup error occurs Example: Following example dumps a map which does not support lookup. Output before: root# bpftool map -jp dump id 40 [ "key": ["0x0a","0x00","0x00","0x00" ], "value": { "error": "can\'t lookup element" }, "key": ["0x0b","0x00","0x00","0x00" ], "value": { "error": "can\'t lookup element" } ] root# bpftool map dump id 40 can't lookup element with key: 0a 00 00 00 can't lookup element with key: 0b 00 00 00 Found 0 elements Output after changes: root# bpftool map dump -jp id 45 [ "key": ["0x0a","0x00","0x00","0x00" ], "value": { "error": "Operation not supported" }, "key": ["0x0b","0x00","0x00","0x00" ], "value": { "error": "Operation not supported" } ] root# bpftool map dump id 45 key: 0a 00 00 00 value: Operation not supported key: 0b 00 00 00 value: Operation not supported Found 0 elements Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-09tools/bpf: bpftool, split the function do_dump()Prashant Bhole
do_dump() function in bpftool/map.c has deep indentations. In order to reduce deep indent, let's move element printing code out of do_dump() into dump_map_elem() function. Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-09bpf: return EOPNOTSUPP when map lookup isn't supportedPrashant Bhole
Return ERR_PTR(-EOPNOTSUPP) from map_lookup_elem() methods of below map types: - BPF_MAP_TYPE_PROG_ARRAY - BPF_MAP_TYPE_STACK_TRACE - BPF_MAP_TYPE_XSKMAP - BPF_MAP_TYPE_SOCKMAP/BPF_MAP_TYPE_SOCKHASH Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-09bpf: error handling when map_lookup_elem isn't supportedPrashant Bhole
The error value returned by map_lookup_elem doesn't differentiate whether lookup was failed because of invalid key or lookup is not supported. Lets add handling for -EOPNOTSUPP return value of map_lookup_elem() method of map, with expectation from map's implementation that it should return -EOPNOTSUPP if lookup is not supported. The errno for bpf syscall for BPF_MAP_LOOKUP_ELEM command will be set to EOPNOTSUPP if map lookup is not supported. Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-09bpf: btf: Fix a missing check bugWenwen Wang
In btf_parse_hdr(), the length of the btf data header is firstly copied from the user space to 'hdr_len' and checked to see whether it is larger than 'btf_data_size'. If yes, an error code EINVAL is returned. Otherwise, the whole header is copied again from the user space to 'btf->hdr'. However, after the second copy, there is no check between 'btf->hdr->hdr_len' and 'hdr_len' to confirm that the two copies get the same value. Given that the btf data is in the user space, a malicious user can race to change the data between the two copies. By doing so, the user can provide malicious data to the kernel and cause undefined behavior. This patch adds a necessary check after the second copy, to make sure 'btf->hdr->hdr_len' has the same value as 'hdr_len'. Otherwise, an error code EINVAL will be returned. Signed-off-by: Wenwen Wang <wang6495@umn.edu> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-09mfd: cros-ec: copy the whole event in get_next_event_xferEmil Karlson
Commit 57e94c8b974db2d83c60e1139c89a70806abbea0 caused cros-ec keyboard events be truncated on many chromebooks so that Left and Right keys on Column 12 were always 0. Use ret as memcpy len to fix this. The old code was using ec_dev->event_size, which is the event payload/data size excluding event_type header, for the length of the memcpy operation. Use ret as memcpy length to avoid the off by one and copy the whole msg->data. Fixes: 57e94c8b974d ("mfd: cros-ec: Increase maximum mkbp event size") Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by: Emil Renner Berthing <kernel@esmil.dk> Signed-off-by: Emil Karlson <jekarlson@gmail.com> Signed-off-by: Benson Leung <bleung@chromium.org>
2018-10-09sparc: Wire up io_pgetevents system call.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-09mm: Preserve _PAGE_DEVMAP across mprotect() callsJan Kara
Currently _PAGE_DEVMAP bit is not preserved in mprotect(2) calls. As a result we will see warnings such as: BUG: Bad page map in process JobWrk0013 pte:800001803875ea25 pmd:7624381067 addr:00007f0930720000 vm_flags:280000f9 anon_vma: (null) mapping:ffff97f2384056f0 index:0 file:457-000000fe00000030-00000009-000000ca-00000001_2001.fileblock fault:xfs_filemap_fault [xfs] mmap:xfs_file_mmap [xfs] readpage: (null) CPU: 3 PID: 15848 Comm: JobWrk0013 Tainted: G W 4.12.14-2.g7573215-default #1 SLE12-SP4 (unreleased) Hardware name: Intel Corporation S2600WFD/S2600WFD, BIOS SE5C620.86B.01.00.0833.051120182255 05/11/2018 Call Trace: dump_stack+0x5a/0x75 print_bad_pte+0x217/0x2c0 ? enqueue_task_fair+0x76/0x9f0 _vm_normal_page+0xe5/0x100 zap_pte_range+0x148/0x740 unmap_page_range+0x39a/0x4b0 unmap_vmas+0x42/0x90 unmap_region+0x99/0xf0 ? vma_gap_callbacks_rotate+0x1a/0x20 do_munmap+0x255/0x3a0 vm_munmap+0x54/0x80 SyS_munmap+0x1d/0x30 do_syscall_64+0x74/0x150 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 ... when mprotect(2) gets used on DAX mappings. Also there is a wide variety of other failures that can result from the missing _PAGE_DEVMAP flag when the area gets used by get_user_pages() later. Fix the problem by including _PAGE_DEVMAP in a set of flags that get preserved by mprotect(2). Fixes: 69660fd797c3 ("x86, mm: introduce _PAGE_DEVMAP") Fixes: ebd31197931d ("powerpc/mm: Add devmap support for ppc64") Cc: <stable@vger.kernel.org> Signed-off-by: Jan Kara <jack@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-10-09dm: fix report zone remapping to account for partition offsetDamien Le Moal
If dm-linear or dm-flakey are layered on top of a partition of a zoned block device, remapping of the start sector and write pointer position of the zones reported by a report zones BIO must be modified to account for the target table entry mapping (start offset within the device and entry mapping with the dm device). If the target's backing device is a partition of a whole disk, the start sector on the physical device of the partition must also be accounted for when modifying the zone information. However, dm_remap_zone_report() was not considering this last case, resulting in incorrect zone information remapping with targets using disk partitions. Fix this by calculating the target backing device start sector using the position of the completed report zones BIO and the unchanged position and size of the original report zone BIO. With this value calculated, the start sector and write pointer position of the target zones can be correctly remapped. Fixes: 10999307c14e ("dm: introduce dm_remap_zone_report()") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-10-09cxgb4: Add thermal zone supportGanesh Goudar
Add thermal zone support to monitor ASIC's temperature. Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-09net/mlx4_en: Use minimal rx and tx ring sizes on kdump kernelAlaa Hleihel
When memory is limited (on kdump kernel), reduce size of rx and tx rings. Also reduce the number of rx rings. Signed-off-by: Alaa Hleihel <alaa@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-09dm cache: destroy migration_cache if cache target registration failedShenghui Wang
Commit 7e6358d244e47 ("dm: fix various targets to dm_register_target after module __init resources created") inadvertently introduced this bug when it moved dm_register_target() after the call to KMEM_CACHE(). Fixes: 7e6358d244e47 ("dm: fix various targets to dm_register_target after module __init resources created") Cc: stable@vger.kernel.org Signed-off-by: Shenghui Wang <shhuiw@foxmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-10-09Merge branch 'ena-fixes'David S. Miller
Arthur Kiyanovski says: ==================== minor bug fixes for ENA Ethernet driver Arthur Kiyanovski (4): net: ena: fix warning in rmmod caused by double iounmap net: ena: fix rare bug when failed restart/resume is followed by driver removal net: ena: fix NULL dereference due to untimely napi initialization net: ena: fix auto casting to boolean ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-09net: ena: fix auto casting to booleanArthur Kiyanovski
Eliminate potential auto casting compilation error. Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-09net: ena: fix NULL dereference due to untimely napi initializationArthur Kiyanovski
napi poll functions should be initialized before running request_irq(), to handle a rare condition where there is a pending interrupt, causing the ISR to fire immediately while the poll function wasn't set yet, causing a NULL dereference. Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-09net: ena: fix rare bug when failed restart/resume is followed by driver removalArthur Kiyanovski
In a rare scenario when ena_device_restore() fails, followed by device remove, an FLR will not be issued. In this case, the device will keep sending asynchronous AENQ keep-alive events, even after driver removal, leading to memory corruption. Fixes: 8c5c7abdeb2d ("net: ena: add power management ops to the ENA driver") Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-09net: ena: fix warning in rmmod caused by double iounmapArthur Kiyanovski
Memory mapped with devm_ioremap is automatically freed when the driver is disconnected from the device. Therefore there is no need to explicitly call devm_iounmap. Fixes: 0857d92f71b6 ("net: ena: add missing unmap bars on device removal") Fixes: 411838e7b41c ("net: ena: fix rare kernel crash when bar memory remap fails") Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-09Merge tag 'kvmarm-fixes-for-4.19-2' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master KVM/arm fixes for 4.19, take #2 - Correctly order GICv3 SGI registers in the cp15 array
2018-10-09KVM: x86: support CONFIG_KVM_AMD=y with CONFIG_CRYPTO_DEV_CCP_DD=mPaolo Bonzini
SEV requires access to the AMD cryptographic device APIs, and this does not work when KVM is builtin and the crypto driver is a module. Actually the Kconfig conditions for CONFIG_KVM_AMD_SEV try to disable SEV in that case, but it does not work because the actual crypto calls are not culled, only sev_hardware_setup() is. This patch adds two CONFIG_KVM_AMD_SEV checks that gate all the remaining SEV code; it fixes this particular configuration, and drops 5 KiB of code when CONFIG_KVM_AMD_SEV=n. Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-09gfs2: Fix iomap buffered write support for journaled filesAndreas Gruenbacher
Commit 64bc06bb32ee broke buffered writes to journaled files (chattr +j): we'll try to journal the buffer heads of the page being written to in gfs2_iomap_journaled_page_done. However, the iomap code no longer creates buffer heads, so we'll BUG() in gfs2_page_add_databufs. Fix that by creating buffer heads ourself when needed. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2018-10-09usb: xhci: pci: Enable Intel USB role mux on Apollo Lake platformsHeikki Krogerus
Intel Apollo Lake has the same internal USB role mux as Intel Cherry Trail. Cc: <stable@vger.kernel.org> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-09usb: roles: intel_xhci: Fix Unbalanced pm_runtime_enableWan Ahmad Zainie
Add missing pm_runtime_disable() to remove(), in order to avoid an Unbalanced pm_runtime_enable when the module is removed and re-probed. Error log: root@intel-corei7-64:~# modprobe -r intel_xhci_usb_role_switch root@intel-corei7-64:~# modprobe intel_xhci_usb_role_switch intel_xhci_usb_sw intel_xhci_usb_sw: Unbalanced pm_runtime_enable! Fixes: cb2968468605 (usb: roles: intel_xhci: Enable runtime PM) Cc: <stable@vger.kernel.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-09cdc-acm: correct counting of UART states in serial state notificationTobias Herzog
The usb standard ("Universal Serial Bus Class Definitions for Communication Devices") distiguishes between "consistent signals" (DSR, DCD), and "irregular signals" (break, ring, parity error, framing error, overrun). The bits of "irregular signals" are set, if this error/event occurred on the device side and are immeadeatly unset, if the serial state notification was sent. Like other drivers of real serial ports do, just the occurence of those events should be counted in serial_icounter_struct (but no 1->0 transitions). Signed-off-by: Tobias Herzog <t-herzog@gmx.de> Acked-by: Oliver Neukum <oneukum@suse.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-09cdc-acm: do not reset notification buffer index upon urb unlinkingTobias Herzog
Resetting the write index of the notification buffer on urb unlink (e.g. closing a cdc-acm device from userspace) may lead to wrong interpretation of further received notifications, in case the index is not 0 when urb unlink happens (i.e. when parts of a notification already have been transferred). On the device side there is no "reset" of the notification transimission and thus we would get out of sync with the device. Signed-off-by: Tobias Herzog <t-herzog@gmx.de> Acked-by: Oliver Neukum <oneukum@suse.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-09cdc-acm: fix race between reset and control messagingOliver Neukum
If a device splits up a control message and a reset() happens between the parts, the message is lost and already recieved parts must be dropped. Signed-off-by: Oliver Neukum <oneukum@suse.com> Fixes: 1aba579f3cf51 ("cdc-acm: handle read pipe errors") Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-09usb: usbip: Fix BUG: KASAN: slab-out-of-bounds in vhci_hub_control()Shuah Khan (Samsung OSG)
vhci_hub_control() accesses port_status array with out of bounds port value. Fix it to reference port_status[] only with a valid rhport value when invalid_rhport flag is true. The invalid_rhport flag is set early on after detecting in port value is within the bounds or not. The following is used reproduce the problem and verify the fix: C reproducer: https://syzkaller.appspot.com/x/repro.c?x=14ed8ab6400000 Reported-by: syzbot+bccc1fe10b70fadc78d0@syzkaller.appspotmail.com Cc: stable <stable@vger.kernel.org> Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-09selftests: usbip: add wait after attach and before checking port statusShuah Khan (Samsung OSG)
Add sleep between attach and "usbip port" check to make sure status is updated. Running attach and query back shows incorrect status. Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-09Revert "perf tools: Fix PMU term format max value calculation"Jiri Olsa
This reverts commit ac0e2cd555373ae6f8f3a3ad3fbbf5b6d1e7aaaa. Michael reported an issue with oversized terms values assignment and I noticed there was actually a misunderstanding of the max value check in the past. The above commit's changelog says: If bit 21 is set, there is parsing issues as below. $ perf stat -a -e uncore_qpi_0/event=0x200002,umask=0x8/ event syntax error: '..pi_0/event=0x200002,umask=0x8/' \___ value too big for format, maximum is 511 But there's no issue there, because the event value is distributed along the value defined by the format. Even if the format defines separated bit, the value is treated as a continual number, which should follow the format definition. In above case it's 9-bit value with last bit separated: $ cat uncore_qpi_0/format/event config:0-7,21 Hence the value 0x200002 is correctly reported as format violation, because it exceeds 9 bits. It should have been 0x102 instead, which sets the 9th bit - the bit 21 of the format. $ perf stat -vv -a -e uncore_qpi_0/event=0x102,umask=0x8/ Using CPUID GenuineIntel-6-2D ... ------------------------------------------------------------ perf_event_attr: type 10 size 112 config 0x200802 sample_type IDENTIFIER ... Reported-by: Michael Petlan <mpetlan@redhat.com> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Fixes: ac0e2cd55537 ("perf tools: Fix PMU term format max value calculation") Link: http://lkml.kernel.org/r/20181003072046.29276-1-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-10-09ARM: KVM: Correctly order SGI register entries in the cp15 arrayMarc Zyngier
The ICC_ASGI1R and ICC_SGI0R register entries in the cp15 array are not correctly ordered, leading to a BUG() at boot time. Move them to their natural location. Fixes: 3e8a8a50c7ef ("KVM: arm: vgic-v3: Add support for ICC_SGI0R and ICC_ASGI1R accesses") Reported-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-10-09mmc: block: avoid multiblock reads for the last sector in SPI modeChris Boot
On some SD cards over SPI, reading with the multiblock read command the last sector will leave the card in a bad state. Remove last sectors from the multiblock reading cmd. Signed-off-by: Chris Boot <bootc@bootc.net> Signed-off-by: Clément Péron <peron.clem@gmail.com> Cc: stable@vger.kernel.org # v4.10+ Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-10-09Merge tag 'arc-4.19-rc8' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Vineet writes: "ARC updates for 4.19-rc8 - Fix clone syscall to update Thread pointer register - Make/build updates (needed for AGL/OE builds) [Alexey] - Typo fix [Colin Ian King]" * tag 'arc-4.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: clone syscall to setp r25 as thread pointer ARC: build: Don't set CROSS_COMPILE in arch's Makefile ARC: fix spelling mistake "entires" -> "entries" ARC: build: Get rid of toolchain check ARCv2: build: use mcpu=hs38 iso generic mcpu=archs
2018-10-09x86/mm: Avoid VLA in pgd_alloc()Kees Cook
Arnd Bergmann reported that turning on -Wvla found a new (unintended) VLA usage: arch/x86/mm/pgtable.c: In function 'pgd_alloc': include/linux/build_bug.h:29:45: error: ISO C90 forbids variable length array 'u_pmds' [-Werror=vla] arch/x86/mm/pgtable.c:190:34: note: in expansion of macro 'static_cpu_has' #define PREALLOCATED_USER_PMDS (static_cpu_has(X86_FEATURE_PTI) ? \ ^~~~~~~~~~~~~~ arch/x86/mm/pgtable.c:431:16: note: in expansion of macro 'PREALLOCATED_USER_PMDS' pmd_t *u_pmds[PREALLOCATED_USER_PMDS]; ^~~~~~~~~~~~~~~~~~~~~~ Use the actual size of the array that is used for X86_FEATURE_PTI, which is known at build time, instead of the variable size. [ mingo: Squashed original fix with followup fix to avoid bisection breakage, wrote new changelog. ] Reported-by: Arnd Bergmann <arnd@arndb.de> Original-written-by: Arnd Bergmann <arnd@arndb.de> Reported-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Toshi Kani <toshi.kani@hpe.com> Fixes: 1be3f247c288 ("x86/mm: Avoid VLA in pgd_alloc()") Link: http://lkml.kernel.org/r/20181008235434.GA35035@beast Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-10-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller
Alexei Starovoitov says: ==================== pull-request: bpf-next 2018-10-08 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) sk_lookup_[tcp|udp] and sk_release helpers from Joe Stringer which allow BPF programs to perform lookups for sockets in a network namespace. This would allow programs to determine early on in processing whether the stack is expecting to receive the packet, and perform some action (eg drop, forward somewhere) based on this information. 2) per-cpu cgroup local storage from Roman Gushchin. Per-cpu cgroup local storage is very similar to simple cgroup storage except all the data is per-cpu. The main goal of per-cpu variant is to implement super fast counters (e.g. packet counters), which don't require neither lookups, neither atomic operations in a fast path. The example of these hybrid counters is in selftests/bpf/netcnt_prog.c 3) allow HW offload of programs with BPF-to-BPF function calls from Quentin Monnet 4) support more than 64-byte key/value in HW offloaded BPF maps from Jakub Kicinski 5) rename of libbpf interfaces from Andrey Ignatov. libbpf is maturing as a library and should follow good practices in library design and implementation to play well with other libraries. This patch set brings consistent naming convention to global symbols. 6) relicense libbpf as LGPL-2.1 OR BSD-2-Clause from Alexei Starovoitov to let Apache2 projects use libbpf 7) various AF_XDP fixes from Björn and Magnus ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-09mm, sched/numa: Remove remaining traces of NUMA rate-limitingSrikar Dronamraju
Remove the leftover pglist_data::numabalancing_migrate_lock and its initialization, we stopped using this lock with: efaffc5e40ae ("mm, sched/numa: Remove rate-limiting of automatic NUMA balancing migration") [ mingo: Rewrote the changelog. ] Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Linux-MM <linux-mm@kvack.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1538824999-31230-1-git-send-email-srikar@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-15 05:45:08 +0000