| Age | Commit message (Collapse) | Author |
|---|
|
Recent attempt to ensure PREROUTING hook is executed again when a
decrypted ipsec packet received on a bridge passes through the network
stack a second time broke the physdev match in INPUT hook.
We can't discard the nf_bridge info strct from sabotage_in hook, as
this is needed by the physdev match.
Keep the struct around and handle this with another conditional instead.
Fixes: 2b272bb558f1 ("netfilter: br_netfilter: disable sabotage_in hook after first suppression")
Reported-and-tested-by: Farid BENAMROUCHE <fariouche@yahoo.fr>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 6.3, 2nd round:
- Fix 'reg' address length for i.MX8MP LCDIF2 device.
- A couple of changes from Fabio Estevam to fix DTC warnings caused
unnecessary address/size cells.
- Re-enable PCI driver support in imx_v6_v7_defconfig.
- Fix PMIC clock source property for imx8mm-evk board.
- A couple of fixes from Peng Fan to correct off-on delay property for
i.MX8 Verdin boards.
* tag 'imx-fixes-6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v6_v7_defconfig: Fix unintentional disablement of PCI
ARM: dts: imx6ull-colibri: Remove unnecessary #address-cells/#size-cells
ARM: dts: imx7d-remarkable2: Remove unnecessary #address-cells/#size-cells
arm64: dts: imx8mp-verdin: correct off-on-delay
arm64: dts: imx8mm-verdin: correct off-on-delay
arm64: dts: imx8mm-evk: correct pmic clock source
arm64: dts: imx8mp: fix address length for LCDIF2
Link: https://lore.kernel.org/r/20230406021602.GP11367@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
ConnectX-7 devices don't have ability to send TX hard/soft limits
events. As a possible workaround, let's rely on existing infrastructure
and use periodic check of cached flow counter. In these periodic checks,
we call to xfrm_state_check_expire() to check and mark state accordingly.
Once the state is marked as XFRM_STATE_EXPIRED, the SA flow rule is
changed to drop all the traffic.
Link: https://lore.kernel.org/r/94a5d82c0c399747117d8a558f9beebfbcf26154.1680162300.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
IPsec logic has two work structs which are submitted to same workqueue.
As a preparation to addition of new work which needs to be submitted
too, let's generalize struct mlx5e_ipsec_work.
Link: https://lore.kernel.org/r/285a1550242363de181bab3a07a69296f66ad9a8.1680162300.git.leonro@nvidia.com
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
IPsec workqueue shouldn't be declared as ordered queue with one work
per-CPU, and can be safely changed to be unordered with default number
of works per-CPU.
Link: https://lore.kernel.org/r/5dc224a4decd09c14f645d38173e1a1710802cd8.1680162300.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
"ip xfrm state ..." command allows users to configure replay sequence
numbers with replay-seq* arguments for RX and replay-oseq* for TX.
Add the needed driver logic to support setting them.
Link: https://lore.kernel.org/r/a9b17827eff2b29a4951225efa684a6cd38f74fe.1680162300.git.leonro@nvidia.com
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
There is no need in implementation of .xdo_dev_state_advance_esn() and
setting work as it will never be called in packet offload mode.
Link: https://lore.kernel.org/r/2fc9fade32e31f03b100d6086a82ad36269349dc.1680162300.git.leonro@nvidia.com
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
In packet offload mode, the hardware is responsible to manage
replay window and advance ESN. In that mode, there won't any
call to .xdo_dev_state_advance_esn callback.
So relax current check for existence of that callback.
Link: https://lore.kernel.org/r/9f3dfc3fef2cfcd191f0c5eee7cf0aa74e7f7786.1680162300.git.leonro@nvidia.com
Reviewed-by: Raed Salem <raeds@nvidia.com>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
It could have never worked, as snd_emu10k1_fx8010_playback_prepare() and
snd_emu10k1_fx8010_playback_hw_free() assume the emu10k1 offset for the
ETRAM, and the default DSP code includes no handler for it. It also
wouldn't make a lot of sense to make it work, as Audigy has an own, much
simpler, pass-through mechanism. So just skip creation of the device.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230405201220.2197938-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Due to two copy/pastos, closing the MIC or EFX capture device would
make a running ADC capture hang due to unsetting its interrupt handler.
In principle, this would have also allowed dereferencing dangling
pointers, but we're actually rather thorough at disabling and flushing
the ints.
While it may sound like one, this actually wasn't a hypothetical bug:
PortAudio will open a capture stream at startup (and close it right
away) even if not asked to. If the first device is busy, it will just
proceed with the next one ... thus killing a concurrent capture.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230405201220.2197923-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The BIOS botches this one completely - it says the 2nd S/PDIF output is
used, while in fact it's the 1st one. This is tested on DP45SG, but I'm
assuming it's valid for the other boards in the series as well.
Also add some comments regarding the pins.
FWIW, the codec is apparently still sold by Tempo Semiconductor, Inc.,
where one can download the documentation.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230405201220.2197826-2-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Like the other boards from the D*45* series, this one sets up the
outputs not quite correctly.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230405201220.2197826-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
snd_cs8427_iec958_active() would always delete
SNDRV_CTL_ELEM_ACCESS_INACTIVE, even though the function has an
argument `active`.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230405201219.2197811-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Functions for searching module kallsyms should have non-empty
definitions only if CONFIG_MODULES=y and CONFIG_KALLSYMS=y. Until now,
only CONFIG_MODULES check was used for many of these, which may have
caused complilation errors on some configs.
This patch moves all relevant functions under the correct configs.
Fixes: bd5314f8dd2d ("kallsyms, bpf: Move find_kallsyms_symbol_value out of internal header")
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202303181535.RFDCnz3E-lkp@intel.com/
Link: https://lore.kernel.org/r/20230330102001.2183693-1-vmalik@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Quentin Monnet says:
====================
This set contains some improvements for bpftool's "visual" program dump
option, which produces the control flow graph in a DOT format. The main
objective is to add support for inline annotations on such graphs, so that
we can have the C source code for the program showing up alongside the
instructions, when available. The last commits also make it possible to
display the line numbers or the bare opcodes in the graph, as supported by
regular program dumps.
v3:
- Fixed formatting of DOT graph: escape spaces, and remove indent that
would cause some unwanted spaces to show up in the resulting graph.
- Don't print line information if the record is empty.
- Add '<' and ' ' to the list of escaped characters for generting the
DOT graph.
- Truncate long file paths, use shorter field names ("line", "col") for
code location information in the graph, add missing separator space.
- Add a commit to return an error if JSON output and CFG are both
required.
- Add a drive-by, clean up commit for bash completion (avoid unnecessary
calls to _bpftool_once_attr()).
v2: Replace fputc(..., stdout) with putchar(...) in dotlabel_puts().
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
In bpftool's bash completion file, function _bpftool_once_attr() is able
to process multiple arguments. There are a few locations where this
function is called multiple times in a row, each time for a single
argument; let's pass all arguments instead to minimize the number of
function calls required for the completion.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20230405132120.59886-8-quentin@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add support for displaying opcodes or/and file references (filepath,
line and column numbers) when dumping the control flow graphs of loaded
BPF programs with bpftool.
The filepaths in the records are absolute. To avoid blocks on the graph
to get too wide, we truncate them when they get too long (but we always
keep the entire file name). In the unlikely case where the resulting
file name is ambiguous, it remains possible to get the full path with a
regular dump (no CFG).
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20230405132120.59886-7-quentin@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
When dumping a program, the keywords "opcodes" (for printing the raw
opcodes), "linum" (for displaying the filename, line number, column
number along with the source code), and "visual" (for generating the
control flow graph for translated programs) are mutually exclusive. But
there's no reason why they should be. Let's make it possible to pass
several of them at once. The "file FILE" option, which makes bpftool
output a binary image to a file, remains incompatible with the others.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20230405132120.59886-6-quentin@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
We do not support JSON output for control flow graphs of programs with
bpftool. So far, requiring both the CFG and JSON output would result in
producing a null JSON object. It makes more sense to raise an error
directly when parsing command line arguments and options, so that users
know they won't get any output they might expect.
If JSON is required for the graph, we leave it to Graphviz instead:
# bpftool prog dump xlated <REF> visual | dot -Tjson
Suggested-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20230405132120.59886-5-quentin@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
We support dumping the control flow graph of loaded programs to the DOT
format with bpftool, but so far this feature wouldn't display the source
code lines available through BTF along with the eBPF bytecode. Let's add
support for these annotations, to make it easier to read the graph.
In prog.c, we move the call to dump_xlated_cfg() in order to pass and
use the full struct dump_data, instead of creating a minimal one in
draw_bb_node().
We pass the pointer to this struct down to dump_xlated_for_graph() in
xlated_dumper.c, where most of the logics is added. We deal with BTF
mostly like we do for plain or JSON output, except that we cannot use a
"nr_skip" value to skip a given number of linfo records (we don't
process the BPF instructions linearly, and apart from the root of the
graph we don't know how many records we should skip, so we just store
the last linfo and make sure the new one we find is different before
printing it).
When printing the source instructions to the label of a DOT graph node,
there are a few subtleties to address. We want some special newline
markers, and there are some characters that we must escape. To deal with
them, we introduce a new dedicated function btf_dump_linfo_dotlabel() in
btf_dumper.c. We'll reuse this function in a later commit to format the
filepath, line, and column references as well.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20230405132120.59886-4-quentin@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
When dumping the control flow graphs for programs using the 16-byte long
load instruction, we need to skip the second part of this instruction
when looking for the next instruction to process. Otherwise, we end up
printing "BUG_ld_00" from the kernel disassembler in the CFG.
Fixes: efcef17a6d65 ("tools: bpftool: generate .dot graph from CFG information")
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20230405132120.59886-3-quentin@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The documentation states that when line_info is available when dumping a
program, the source line will be displayed "by default". There is no
notion of "default" here: the line is always displayed if available,
there is no way currently to turn it off.
In the next sentence, the documentation states that if "linum" is used
on the command line, the relevant filename, line, and column will be
displayed "on top of the source line". This is incorrect, as they are
currently displayed on the right side of the source line (or on top of
the eBPF instruction, not the source).
This commit fixes the documentation to address these points.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20230405132120.59886-2-quentin@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Since SQE memory is shared with userspace, we should only be reading it
once. We cannot read it multiple times, particularly when it's read once
for validation and then read again for the actual use.
ublk_ch_uring_cmd() is safe when called as a retry operation, as the
memory backing is stable at that point. But for normal issue, we want
to ensure that we only read ublksrv_io_cmd once. Wrap the function in
a helper that reads the value into an on-stack copy of the struct.
Cc: stable@vger.kernel.org # 6.0+
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Queue reset was moved out from __init_dma_rx_desc_rings() and
__init_dma_tx_desc_rings() functions. Thus, the driver fails to transmit
and receive packet after XDP prog setup.
This commit adds the missing queue reset into stmmac_xdp_open() function.
Fixes: f9ec5723c3db ("net: ethernet: stmicro: stmmac: move queue reset to dedicated functions")
Cc: <stable@vger.kernel.org> # 6.0+
Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://lore.kernel.org/r/20230404044823.3226144-1-yoong.siang.song@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The patch addresses an issue with the reset logic on the i.MX93 SoC, which
requires configuration of the correct interface speed under RMII mode to
complete the reset. The patch implements a fix_soc_reset function and uses
it specifically for the i.MX93 SoCs.
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230403222302.328262-2-shenwei.wang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch adds support for platform-specific reset logic in the
stmmac driver. Some SoCs require a different reset mechanism than
the standard dwmac IP reset. To support these platforms, a new function
pointer 'fix_soc_reset' is added to the plat_stmmacenet_data structure.
The stmmac_reset in hwif.h is modified to call the 'fix_soc_reset'
function if it exists. This enables the driver to use the platform-specific
reset logic when necessary.
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230403222302.328262-1-shenwei.wang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When deleting the netns and recreating a new one while re-adding the
veth interface, there is a small window of time during which the old
veth interface has not yet been removed. This can cause the new addition
to fail. To resolve this issue, we can either wait for a short while to
ensure that the old veth interface is deleted, or we can specifically
remove the veth interface.
Before this patch:
# ./rps_default_mask.sh
empty rps_default_mask [ ok ]
changing rps_default_mask dont affect existing devices [ ok ]
changing rps_default_mask dont affect existing netns [ ok ]
changing rps_default_mask affect newly created devices [ ok ]
changing rps_default_mask don't affect newly child netns[II][ ok ]
rps_default_mask is 0 by default in child netns [ ok ]
RTNETLINK answers: File exists
changing rps_default_mask in child ns don't affect the main one[ ok ]
cat: /sys/class/net/vethC11an1/queues/rx-0/rps_cpus: No such file or directory
changing rps_default_mask in child ns affects new childns devices./rps_default_mask.sh: line 36: [: -eq: unary operator expected
[fail] expected 1 found
changing rps_default_mask in child ns don't affect existing devices[ ok ]
After this patch:
# ./rps_default_mask.sh
empty rps_default_mask [ ok ]
changing rps_default_mask dont affect existing devices [ ok ]
changing rps_default_mask dont affect existing netns [ ok ]
changing rps_default_mask affect newly created devices [ ok ]
changing rps_default_mask don't affect newly child netns[II][ ok ]
rps_default_mask is 0 by default in child netns [ ok ]
changing rps_default_mask in child ns don't affect the main one[ ok ]
changing rps_default_mask in child ns affects new childns devices[ ok ]
changing rps_default_mask in child ns don't affect existing devices[ ok ]
Fixes: 3a7d84eae03b ("self-tests: more rps self tests")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20230404072411.879476-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Not all fec MDIO bus drivers support C45 mode transactions. The older fec
hardware block in many ColdFire SoCs does not appear to support them, at
least according to most of the different ColdFire SoC reference manuals.
The bits used to generate C45 access on the iMX parts, in the OP field
of the MMFR register, are documented as generating non-compliant MII
frames (it is not documented as to exactly how they are non-compliant).
Commit 8d03ad1ab0b0 ("net: fec: Separate C22 and C45 transactions")
means the fec driver will always register c45 MDIO read and write
methods. During probe these will always be accessed now generating
non-compliant MII accesses on ColdFire based devices.
Add a quirk define, FEC_QUIRK_HAS_MDIO_C45, that can be used to
distinguish silicon that supports MDIO C45 framing or not. Add this to
all the existing iMX quirks, so they will be behave as they do now (*).
(*) it seems that some iMX parts may not support C45 transactions either.
The iMX25 and iMX50 Reference Manuals contain similar wording to
the ColdFire Reference Manuals on this.
Fixes: 8d03ad1ab0b0 ("net: fec: Separate C22 and C45 transactions")
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230404052207.3064861-1-gerg@linux-m68k.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove nesting level before SQ's SW state title and before SQ's SW
state capabilities line.
Preceding the SQ's SW state with a nameless nesting, wraps the inner SW
state map/dictionary with a nameless dictionary which is prohibited in
JSON file format.
Removing preceding SW state nest by removing function call
devlink_fmsg_obj_nest_start() and devlink_fmsg_obj_nest_end().
Signed-off-by: Adham Faris <afaris@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Remove nesting level before RQ's SW state title and before RQ's SW
state capabilities line.
Preceding the RQ's SW state with a nameless nesting, wraps the inner SW
state map/dictionary with a nameless dictionary which is prohibited in
JSON file format.
Removing preceding SW state nest by removing function call
devlink_fmsg_obj_nest_start() and devlink_fmsg_obj_nest_end().
Signed-off-by: Adham Faris <afaris@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The 'skb_pc/cc' naming is misleading as the values hold the
producer/consumer indices (masked values), not the counters. Rename to
'skb_pi/ci'.
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Adham Faris <afaris@nvidia.com>
|
|
precision
Multiplier values are equivalent to 2^(shift constant) since all mlx5
devices advertise a 1Ghz frequency for the internal timer. The previous
shift constant of 23 led to internal timer adjustments only taking place
when the provided adjustment values were greater than or equal to ~120 ppb
or ~7864 scaled ppm. Using a shift constant of 31 enables adjustments when
an adjustment parameter is greater than or equal to ~0.47 ppb or ~30.8
scaled ppm.
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Bar Shapira <bshapira@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Currently macsec_fs_tx_create uses memset to set
two parameters to zeros when they are already
initialized to zeros.
Don't pass macsec_ctx to mlx5e_macsec_fs_add_rule
since it's not used.
Signed-off-by: Emeel Hakim <ehakim@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Sample action before a ct nat action was not supported when only
chain was restored on misses. As to work around that limitation,
ct action was reordered to be first (so if hw misses on ct
action, packet wasn't modified). This reordering wasn't possible
if there was a sample action before the ct nat action, as we had to
sample the packet before the nat operation.
Now that the misses continue from the relevant tc ct action
in software and ct action is no longer reordered, this case
is supported.
Remove this limitation.
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Mirror action before a ct nat action was not supported when only
chain was restored on misses. As to work around that limitation,
ct action was reordered to be first (so if hw misses on ct
action, packet wasn't modified). This reordering wasn't possible
if there was mirror action before the ct nat action, as we had to
mirror the packet before the nat operation.
Now that the misses continue from the relevant tc ct action
in software and ct action is no longer reordered, this case
is supported.
Remove this limitation.
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Tuple rewrite and ct action was not supported when only chain was
restored on misses. To work around that limitation, ct action was
reordered to be first (so if hw misses on ct action, packet wasn't
modified). This reordering wasn't possible for tuple rewrite
actions before ct action since the ct action result was
dependent on the tuple info.
Now that the misses continue from the relevant tc ct action
in software and ct action is no longer reordered, this case
is supported.
Remove this limitation.
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Multiple ct actions was not supported when only chain was
restored on misses, as CT is a modifying action which could
modify the packet and cause the sw ct rule to not match again
and continue processing.
Now that the misses continue from the relevant tc ct action
in software, this case is supported.
Remove this limitation.
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
CT action has special treating as a per-flow action since
it was assumed to be singular and reordered to be first on
the action list.
This isn't the case anymore, and can be converted to just a
FWD to pre_ct + MODIFY_HEAD, and handled per post_act rule.
Remove special handling of CT action, and offload it while
post parsing each ct attribute.
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
CT action reordering was done as a workaround when CT misses
used to restore the relevant filter's tc chain and continuing sw processing
from that chain. As such, there was a need to reorder CT action to be before
any packet modifying actions (e.g mac rewrite).
Currently (after patch "net/mlx5e: TC, Set CT miss to the specific ct
action instance"), CT misses continues from the relevant ct action in
software, and so reordering isn't needed anymore.
Remove the reordering.
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
CT action can miss in a middle of an action list, use
per action stats to correctly report stats for missed
packets.
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Actions that can be setup per flow attribute (so per split rule)
are cleaned up from mlx5_free_flow_attr(), mlx5e_tc_del_fdb_flow(),
and free_flow_post_acts().
Remove the duplication by re-using the helper function for
the main flow attribute and split rules attributes.
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
vf_tun is being assigned but never being used so remove it.
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Many parsers of tc actions just return true on their can_offload()
implementation, without checking the input flow/action.
Set the default can_offload action to true (allow), and avoid
having many can_offload implementations that do just that.
This patch doesn't change any functionality.
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Since commit 75c2f26da03f ("PCI: imx6: Add i.MX PCIe EP mode support")
the i.MX6 PCI driver is no longer selected by default. The
existing PCI_IMX6 was made a hidden option, selected by new options
PCI_IMX6_HOST (for the existing support) and PCI_IMX6_EP (for the
endpoint mode), but there has been no corresponding update to
imx_v6_v7_defconfig so the PCI_IMX6 ends up getting disabled.
Switch imx_v6_v7_defconfig to PCI_IMX6_HOST to preserve the existing
functionality.
This is based on the same fix done in commit 0cd5780eb625 ("arm64:
defconfig: Fix unintentional disablement of PCI on i.MX").
Fixes: 75c2f26da03f ("PCI: imx6: Add i.MX PCIe EP mode support")
Reported-by: Mattias Barthel <mattiasbarthel@gmail.com>
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
For the sake of readability, use the netlink payload helpers from
the 'nla_get_*()' family to parse the attributes.
tdc results:
1..5
ok 1 9903 - Add mqprio Qdisc to multi-queue device (8 queues)
ok 2 453a - Delete nonexistent mqprio Qdisc
ok 3 5292 - Delete mqprio Qdisc twice
ok 4 45a9 - Add mqprio Qdisc to single-queue device
ok 5 2ba9 - Show mqprio class
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230404203449.1627033-1-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is a concurrency bug that may cause the wrong value to be loaded
when a CPU is modifying the maple tree.
CPU1:
mtree_insert_range()
mas_insert()
mas_store_root()
...
mas_root_expand()
...
rcu_assign_pointer(mas->tree->ma_root, mte_mk_root(mas->node));
ma_set_meta(node, maple_leaf_64, 0, slot); <---IP
CPU2:
mtree_load()
mtree_lookup_walk()
ma_data_end();
When CPU1 is about to execute the instruction pointed to by IP, the
ma_data_end() executed by CPU2 may return the wrong end position, which
will cause the value loaded by mtree_load() to be wrong.
An example of triggering the bug:
Add mdelay(100) between rcu_assign_pointer() and ma_set_meta() in
mas_root_expand().
static DEFINE_MTREE(tree);
int work(void *p) {
unsigned long val;
for (int i = 0 ; i< 30; ++i) {
val = (unsigned long)mtree_load(&tree, 8);
mdelay(5);
pr_info("%lu",val);
}
return 0;
}
mt_init_flags(&tree, MT_FLAGS_USE_RCU);
mtree_insert(&tree, 0, (void*)12345, GFP_KERNEL);
run_thread(work)
mtree_insert(&tree, 1, (void*)56789, GFP_KERNEL);
In RCU mode, mtree_load() should always return the value before or after
the data structure is modified, and in this example mtree_load(&tree, 8)
may return 56789 which is not expected, it should always return NULL. Fix
it by put ma_set_meta() before rcu_assign_pointer().
Link: https://lkml.kernel.org/r/20230314124203.91572-4-zhangpeng.00@bytedance.com
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
if (likely(offset > end))
max = pivots[offset];
The above code should be changed to if (likely(offset < end)), which is
correct. This affects the correctness of ma_data_end(). Now it seems
that the final result will not be wrong, but it is best to change it.
This patch does not change the code as above, because it simplifies the
code by the way.
Link: https://lkml.kernel.org/r/20230314124203.91572-1-zhangpeng.00@bytedance.com
Link: https://lkml.kernel.org/r/20230314124203.91572-2-zhangpeng.00@bytedance.com
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The si->lock must be held when deleting the si from the available list.
Otherwise, another thread can re-add the si to the available list, which
can lead to memory corruption. The only place we have found where this
happens is in the swapoff path. This case can be described as below:
core 0 core 1
swapoff
del_from_avail_list(si) waiting
try lock si->lock acquire swap_avail_lock
and re-add si into
swap_avail_head
acquire si->lock but missing si already being added again, and continuing
to clear SWP_WRITEOK, etc.
It can be easily found that a massive warning messages can be triggered
inside get_swap_pages() by some special cases, for example, we call
madvise(MADV_PAGEOUT) on blocks of touched memory concurrently, meanwhile,
run much swapon-swapoff operations (e.g. stress-ng-swap).
However, in the worst case, panic can be caused by the above scene. In
swapoff(), the memory used by si could be kept in swap_info[] after
turning off a swap. This means memory corruption will not be caused
immediately until allocated and reset for a new swap in the swapon path.
A panic message caused: (with CONFIG_PLIST_DEBUG enabled)
------------[ cut here ]------------
top: 00000000e58a3003, n: 0000000013e75cda, p: 000000008cd4451a
prev: 0000000035b1e58a, n: 000000008cd4451a, p: 000000002150ee8d
next: 000000008cd4451a, n: 000000008cd4451a, p: 000000008cd4451a
WARNING: CPU: 21 PID: 1843 at lib/plist.c:60 plist_check_prev_next_node+0x50/0x70
Modules linked in: rfkill(E) crct10dif_ce(E)...
CPU: 21 PID: 1843 Comm: stress-ng Kdump: ... 5.10.134+
Hardware name: Alibaba Cloud ECS, BIOS 0.0.0 02/06/2015
pstate: 60400005 (nZCv daif +PAN -UAO -TCO BTYPE=--)
pc : plist_check_prev_next_node+0x50/0x70
lr : plist_check_prev_next_node+0x50/0x70
sp : ffff0018009d3c30
x29: ffff0018009d3c40 x28: ffff800011b32a98
x27: 0000000000000000 x26: ffff001803908000
x25: ffff8000128ea088 x24: ffff800011b32a48
x23: 0000000000000028 x22: ffff001800875c00
x21: ffff800010f9e520 x20: ffff001800875c00
x19: ffff001800fdc6e0 x18: 0000000000000030
x17: 0000000000000000 x16: 0000000000000000
x15: 0736076307640766 x14: 0730073007380731
x13: 0736076307640766 x12: 0730073007380731
x11: 000000000004058d x10: 0000000085a85b76
x9 : ffff8000101436e4 x8 : ffff800011c8ce08
x7 : 0000000000000000 x6 : 0000000000000001
x5 : ffff0017df9ed338 x4 : 0000000000000001
x3 : ffff8017ce62a000 x2 : ffff0017df9ed340
x1 : 0000000000000000 x0 : 0000000000000000
Call trace:
plist_check_prev_next_node+0x50/0x70
plist_check_head+0x80/0xf0
plist_add+0x28/0x140
add_to_avail_list+0x9c/0xf0
_enable_swap_info+0x78/0xb4
__do_sys_swapon+0x918/0xa10
__arm64_sys_swapon+0x20/0x30
el0_svc_common+0x8c/0x220
do_el0_svc+0x2c/0x90
el0_svc+0x1c/0x30
el0_sync_handler+0xa8/0xb0
el0_sync+0x148/0x180
irq event stamp: 2082270
Now, si->lock locked before calling 'del_from_avail_list()' to make sure
other thread see the si had been deleted and SWP_WRITEOK cleared together,
will not reinsert again.
This problem exists in versions after stable 5.10.y.
Link: https://lkml.kernel.org/r/20230404154716.23058-1-rongwei.wang@linux.alibaba.com
Fixes: a2468cc9bfdff ("swap: choose swap device according to numa node")
Tested-by: Yongchen Yin <wb-yyc939293@alibaba-inc.com>
Signed-off-by: Rongwei Wang <rongwei.wang@linux.alibaba.com>
Cc: Bagas Sanjaya <bagasdotme@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Aaron Lu <aaron.lu@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The current nilfs2 sysfs support has issues with the timing of creation
and deletion of sysfs entries, potentially leading to null pointer
dereferences, use-after-free, and lockdep warnings.
Some of the sysfs attributes for nilfs2 per-filesystem instance refer to
metadata file "cpfile", "sufile", or "dat", but
nilfs_sysfs_create_device_group that creates those attributes is executed
before the inodes for these metadata files are loaded, and
nilfs_sysfs_delete_device_group which deletes these sysfs entries is
called after releasing their metadata file inodes.
Therefore, access to some of these sysfs attributes may occur outside of
the lifetime of these metadata files, resulting in inode NULL pointer
dereferences or use-after-free.
In addition, the call to nilfs_sysfs_create_device_group() is made during
the locking period of the semaphore "ns_sem" of nilfs object, so the
shrinker call caused by the memory allocation for the sysfs entries, may
derive lock dependencies "ns_sem" -> (shrinker) -> "locks acquired in
nilfs_evict_inode()".
Since nilfs2 may acquire "ns_sem" deep in the call stack holding other
locks via its error handler __nilfs_error(), this causes lockdep to report
circular locking. This is a false positive and no circular locking
actually occurs as no inodes exist yet when
nilfs_sysfs_create_device_group() is called. Fortunately, the lockdep
warnings can be resolved by simply moving the call to
nilfs_sysfs_create_device_group() out of "ns_sem".
This fixes these sysfs issues by revising where the device's sysfs
interface is created/deleted and keeping its lifetime within the lifetime
of the metadata files above.
Link: https://lkml.kernel.org/r/20230330205515.6167-1-konishi.ryusuke@gmail.com
Fixes: dd70edbde262 ("nilfs2: integrate sysfs support into driver")
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+979fa7f9c0d086fdc282@syzkaller.appspotmail.com
Link: https://lkml.kernel.org/r/0000000000003414b505f7885f7e@google.com
Reported-by: syzbot+5b7d542076d9bddc3c6a@syzkaller.appspotmail.com
Link: https://lkml.kernel.org/r/0000000000006ac86605f5f44eb9@google.com
Cc: Viacheslav Dubeyko <slava@dubeyko.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Device exclusive page table entries are used to prevent CPU access to a
page whilst it is being accessed from a device. Typically this is used to
implement atomic operations when the underlying bus does not support
atomic access. When a CPU thread encounters a device exclusive entry it
locks the page and restores the original entry after calling mmu notifiers
to signal drivers that exclusive access is no longer available.
The device exclusive entry holds a reference to the page making it safe to
access the struct page whilst the entry is present. However the fault
handling code does not hold the PTL when taking the page lock. This means
if there are multiple threads faulting concurrently on the device
exclusive entry one will remove the entry whilst others will wait on the
page lock without holding a reference.
This can lead to threads locking or waiting on a folio with a zero
refcount. Whilst mmap_lock prevents the pages getting freed via munmap()
they may still be freed by a migration. This leads to warnings such as
PAGE_FLAGS_CHECK_AT_FREE due to the page being locked when the refcount
drops to zero.
Fix this by trying to take a reference on the folio before locking it.
The code already checks the PTE under the PTL and aborts if the entry is
no longer there. It is also possible the folio has been unmapped, freed
and re-allocated allowing a reference to be taken on an unrelated folio.
This case is also detected by the PTE check and the folio is unlocked
without further changes.
Link: https://lkml.kernel.org/r/20230330012519.804116-1-apopple@nvidia.com
Fixes: b756a3b5e7ea ("mm: device exclusive memory access")
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
