summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-05-14phy: renesas: rcar-gen3-usb2: Assert PLL reset on PHY power offClaudiu Beznea
Assert PLL reset on PHY power off. This saves power. Fixes: f3b5a8d9b50d ("phy: rcar-gen3-usb2: Add R-Car Gen3 USB2 PHY driver") Cc: stable@vger.kernel.org Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Link: https://lore.kernel.org/r/20250507125032.565017-5-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2025-05-14phy: renesas: rcar-gen3-usb2: Lock around hardware registers and driver dataClaudiu Beznea
The phy-rcar-gen3-usb2 driver exposes four individual PHYs that are requested and configured by PHY users. The struct phy_ops APIs access the same set of registers to configure all PHYs. Additionally, PHY settings can be modified through sysfs or an IRQ handler. While some struct phy_ops APIs are protected by a driver-wide mutex, others rely on individual PHY-specific mutexes. This approach can lead to various issues, including: 1/ the IRQ handler may interrupt PHY settings in progress, racing with hardware configuration protected by a mutex lock 2/ due to msleep(20) in rcar_gen3_init_otg(), while a configuration thread suspends to wait for the delay, another thread may try to configure another PHY (with phy_init() + phy_power_on()); re-running the phy_init() goes to the exact same configuration code, re-running the same hardware configuration on the same set of registers (and bits) which might impact the result of the msleep for the 1st configuring thread 3/ sysfs can configure the hardware (though role_store()) and it can still race with the phy_init()/phy_power_on() APIs calling into the drivers struct phy_ops To address these issues, add a spinlock to protect hardware register access and driver private data structures (e.g., calls to rcar_gen3_is_any_rphy_initialized()). Checking driver-specific data remains necessary as all PHY instances share common settings. With this change, the existing mutex protection is removed and the cleanup.h helpers are used. While at it, to keep the code simpler, do not skip regulator_enable()/regulator_disable() APIs in rcar_gen3_phy_usb2_power_on()/rcar_gen3_phy_usb2_power_off() as the regulators enable/disable operations are reference counted anyway. Fixes: f3b5a8d9b50d ("phy: rcar-gen3-usb2: Add R-Car Gen3 USB2 PHY driver") Cc: stable@vger.kernel.org Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Link: https://lore.kernel.org/r/20250507125032.565017-4-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2025-05-14phy: renesas: rcar-gen3-usb2: Move IRQ request in probeClaudiu Beznea
Commit 08b0ad375ca6 ("phy: renesas: rcar-gen3-usb2: move IRQ registration to init") moved the IRQ request operation from probe to struct phy_ops::phy_init API to avoid triggering interrupts (which lead to register accesses) while the PHY clocks (enabled through runtime PM APIs) are not active. If this happens, it results in a synchronous abort. One way to reproduce this issue is by enabling CONFIG_DEBUG_SHIRQ, which calls free_irq() on driver removal. Move the IRQ request and free operations back to probe, and take the runtime PM state into account in IRQ handler. This commit is preparatory for the subsequent fixes in this series. Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Link: https://lore.kernel.org/r/20250507125032.565017-3-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2025-05-14phy: renesas: rcar-gen3-usb2: Fix role detection on unbind/bindClaudiu Beznea
It has been observed on the Renesas RZ/G3S SoC that unbinding and binding the PHY driver leads to role autodetection failures. This issue occurs when PHY 3 is the first initialized PHY. PHY 3 does not have an interrupt associated with the USB2_INT_ENABLE register (as rcar_gen3_int_enable[3] = 0). As a result, rcar_gen3_init_otg() is called to initialize OTG without enabling PHY interrupts. To resolve this, add rcar_gen3_is_any_otg_rphy_initialized() and call it in role_store(), role_show(), and rcar_gen3_init_otg(). At the same time, rcar_gen3_init_otg() is only called when initialization for a PHY with interrupt bits is in progress. As a result, the struct rcar_gen3_phy::otg_initialized is no longer needed. Fixes: 549b6b55b005 ("phy: renesas: rcar-gen3-usb2: enable/disable independent irqs") Cc: stable@vger.kernel.org Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Link: https://lore.kernel.org/r/20250507125032.565017-2-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2025-05-14phy: tegra: xusb: remove a stray unlockDan Carpenter
We used to take a lock in tegra186_utmi_bias_pad_power_on() but now we have moved the lock into the caller. Unfortunately, when we moved the lock this unlock was left behind and it results in a double unlock. Delete it now. Fixes: b47158fb4295 ("phy: tegra: xusb: Use a bitmask for UTMI pad power state tracking") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Link: https://lore.kernel.org/r/aAjmR6To4EnvRl4G@stanley.mountain Signed-off-by: Vinod Koul <vkoul@kernel.org>
2025-05-14ALSA: es1968: Add error handling for snd_pcm_hw_constraint_pow2()Wentao Liang
The function snd_es1968_capture_open() calls the function snd_pcm_hw_constraint_pow2(), but does not check its return value. A proper implementation can be found in snd_cx25821_pcm_open(). Add error handling for snd_pcm_hw_constraint_pow2() and propagate its error code. Fixes: b942cf815b57 ("[ALSA] es1968 - Fix stuttering capture") Cc: stable@vger.kernel.org # v2.6.22 Signed-off-by: Wentao Liang <vulab@iscas.ac.cn> Link: https://patch.msgid.link/20250514092444.331-1-vulab@iscas.ac.cn Signed-off-by: Takashi Iwai <tiwai@suse.de>
2025-05-14octeontx2-pf: Fix ethtool support for SDP representorsHariprasad Kelam
The hardware supports multiple MAC types, including RPM, SDP, and LBK. However, features such as link settings and pause frames are only available on RPM MAC, and not supported on SDP or LBK. This patch updates the ethtool operations logic accordingly to reflect this behavior. Fixes: 2f7f33a09516 ("octeontx2-pf: Add representors for sdp MAC") Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-05-14regulator: max20086: fix invalid memory accessCosmin Tanislav
max20086_parse_regulators_dt() calls of_regulator_match() using an array of struct of_regulator_match allocated on the stack for the matches argument. of_regulator_match() calls devm_of_regulator_put_matches(), which calls devres_alloc() to allocate a struct devm_of_regulator_matches which will be de-allocated using devm_of_regulator_put_matches(). struct devm_of_regulator_matches is populated with the stack allocated matches array. If the device fails to probe, devm_of_regulator_put_matches() will be called and will try to call of_node_put() on that stack pointer, generating the following dmesg entries: max20086 6-0028: Failed to read DEVICE_ID reg: -121 kobject: '\xc0$\xa5\x03' (000000002cebcb7a): is not initialized, yet kobject_put() is being called. Followed by a stack trace matching the call flow described above. Switch to allocating the matches array using devm_kcalloc() to avoid accessing the stack pointer long after it's out of scope. This also has the advantage of allowing multiple max20086 to probe without overriding the data stored inside the global of_regulator_match. Fixes: bfff546aae50 ("regulator: Add MAX20086-MAX20089 driver") Signed-off-by: Cosmin Tanislav <demonsingur@gmail.com> Link: https://patch.msgid.link/20250508064947.2567255-1-demonsingur@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-05-14spi: spi-sun4i: fix early activationAlessandro Grassi
The SPI interface is activated before the CPOL setting is applied. In that moment, the clock idles high and CS goes low. After a short delay, CPOL and other settings are applied, which may cause the clock to change state and idle low. This transition is not part of a clock cycle, and it can confuse the receiving device. To prevent this unexpected transition, activate the interface while CPOL and the other settings are being applied. Signed-off-by: Alessandro Grassi <alessandro.grassi@mailbox.org> Link: https://patch.msgid.link/20250502095520.13825-1-alessandro.grassi@mailbox.org Signed-off-by: Mark Brown <broonie@kernel.org>
2025-05-14phy: phy-rockchip-samsung-hdptx: Fix PHY PLL output 50.25MHz errorAlgea Cao
When using HDMI PLL frequency division coefficient at 50.25MHz that is calculated by rk_hdptx_phy_clk_pll_calc(), it fails to get PHY LANE lock. Although the calculated values are within the allowable range of PHY PLL configuration. In order to fix the PHY LANE lock error and provide the expected 50.25MHz output, manually compute the required PHY PLL frequency division coefficient and add it to ropll_tmds_cfg configuration table. Signed-off-by: Algea Cao <algea.cao@rock-chips.com> Reviewed-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20250427095124.3354439-1-algea.cao@rock-chips.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2025-05-14phy: starfive: jh7110-usb: Fix USB 2.0 host occasional detection failureHal Feng
JH7110 USB 2.0 host fails to detect USB 2.0 devices occasionally. With a long time of debugging and testing, we found that setting Rx clock gating control signal to normal power consumption mode can solve this problem. Signed-off-by: Hal Feng <hal.feng@starfivetech.com> Link: https://lore.kernel.org/r/20250422101244.51686-1-hal.feng@starfivetech.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2025-05-14nvme: multipath: enable BLK_FEAT_ATOMIC_WRITES for multipathingAlan Adamson
A change to QEMU resulted in all nvme controllers (single and multi-controller subsystems) to have its CMIC.MCTRS bit set which indicates the subsystem supports multiple controllers and it is possible a namespace can be shared between those multiple controllers in a multipath configuration. When a namespace of a CMIC.MCTRS enabled subsystem is allocated, a multipath node is created. The queue limits for this node are inherited from the namespace being allocated. When inheriting queue limits, the features being inherited need to be specified. The atomic write feature (BLK_FEAT_ATOMIC_WRITES) was not specified so the atomic queue limits were not inherited by the multipath disk node which resulted in the sysfs atomic write attributes being zeroed. The fix is to include BLK_FEAT_ATOMIC_WRITES in the list of features to be inherited. Signed-off-by: Alan Adamson <alan.adamson@oracle.com> Reviewed-by: John Garry <john.g.garry@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2025-05-13qlcnic: fix memory leak in qlcnic_sriov_channel_cfg_cmd()Abdun Nihaal
In one of the error paths in qlcnic_sriov_channel_cfg_cmd(), the memory allocated in qlcnic_sriov_alloc_bc_mbx_args() for mailbox arguments is not freed. Fix that by jumping to the error path that frees them, by calling qlcnic_free_mbx_args(). This was found using static analysis. Fixes: f197a7aa6288 ("qlcnic: VF-PF communication channel implementation") Signed-off-by: Abdun Nihaal <abdun.nihaal@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250512044829.36400-1-abdun.nihaal@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-13docs: networking: timestamping: improve stacked PHC sentenceVladimir Oltean
The first paragraph makes no grammatical sense. I suppose a portion of the intended sentece is missing: "[The challenge with ] stacked PHCs (...) is that they uncover bugs". Rephrase, and at the same time simplify the structure of the sentence a little bit, it is not easy to follow. Fixes: 94d9f78f4d64 ("docs: networking: timestamping: add section for stacked PHC devices") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Link: https://patch.msgid.link/20250512131751.320283-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-13net/mlx5e: Disable MACsec offload for uplink representor profileCarolina Jubran
MACsec offload is not supported in switchdev mode for uplink representors. When switching to the uplink representor profile, the MACsec offload feature must be cleared from the netdevice's features. If left enabled, attempts to add offloads result in a null pointer dereference, as the uplink representor does not support MACsec offload even though the feature bit remains set. Clear NETIF_F_HW_MACSEC in mlx5e_fix_uplink_rep_features(). Kernel log: Oops: general protection fault, probably for non-canonical address 0xdffffc000000000f: 0000 [#1] SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000078-0x000000000000007f] CPU: 29 UID: 0 PID: 4714 Comm: ip Not tainted 6.14.0-rc4_for_upstream_debug_2025_03_02_17_35 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:__mutex_lock+0x128/0x1dd0 Code: d0 7c 08 84 d2 0f 85 ad 15 00 00 8b 35 91 5c fe 03 85 f6 75 29 49 8d 7e 60 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 a6 15 00 00 4d 3b 76 60 0f 85 fd 0b 00 00 65 ff RSP: 0018:ffff888147a4f160 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000001 RDX: 000000000000000f RSI: 0000000000000000 RDI: 0000000000000078 RBP: ffff888147a4f2e0 R08: ffffffffa05d2c19 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: dffffc0000000000 R14: 0000000000000018 R15: ffff888152de0000 FS: 00007f855e27d800(0000) GS:ffff88881ee80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000004e5768 CR3: 000000013ae7c005 CR4: 0000000000372eb0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 Call Trace: <TASK> ? die_addr+0x3d/0xa0 ? exc_general_protection+0x144/0x220 ? asm_exc_general_protection+0x22/0x30 ? mlx5e_macsec_add_secy+0xf9/0x700 [mlx5_core] ? __mutex_lock+0x128/0x1dd0 ? lockdep_set_lock_cmp_fn+0x190/0x190 ? mlx5e_macsec_add_secy+0xf9/0x700 [mlx5_core] ? mutex_lock_io_nested+0x1ae0/0x1ae0 ? lock_acquire+0x1c2/0x530 ? macsec_upd_offload+0x145/0x380 ? lockdep_hardirqs_on_prepare+0x400/0x400 ? kasan_save_stack+0x30/0x40 ? kasan_save_stack+0x20/0x40 ? kasan_save_track+0x10/0x30 ? __kasan_kmalloc+0x77/0x90 ? __kmalloc_noprof+0x249/0x6b0 ? genl_family_rcv_msg_attrs_parse.constprop.0+0xb5/0x240 ? mlx5e_macsec_add_secy+0xf9/0x700 [mlx5_core] mlx5e_macsec_add_secy+0xf9/0x700 [mlx5_core] ? mlx5e_macsec_add_rxsa+0x11a0/0x11a0 [mlx5_core] macsec_update_offload+0x26c/0x820 ? macsec_set_mac_address+0x4b0/0x4b0 ? lockdep_hardirqs_on_prepare+0x284/0x400 ? _raw_spin_unlock_irqrestore+0x47/0x50 macsec_upd_offload+0x2c8/0x380 ? macsec_update_offload+0x820/0x820 ? __nla_parse+0x22/0x30 ? genl_family_rcv_msg_attrs_parse.constprop.0+0x15e/0x240 genl_family_rcv_msg_doit+0x1cc/0x2a0 ? genl_family_rcv_msg_attrs_parse.constprop.0+0x240/0x240 ? cap_capable+0xd4/0x330 genl_rcv_msg+0x3ea/0x670 ? genl_family_rcv_msg_dumpit+0x2a0/0x2a0 ? lockdep_set_lock_cmp_fn+0x190/0x190 ? macsec_update_offload+0x820/0x820 netlink_rcv_skb+0x12b/0x390 ? genl_family_rcv_msg_dumpit+0x2a0/0x2a0 ? netlink_ack+0xd80/0xd80 ? rwsem_down_read_slowpath+0xf90/0xf90 ? netlink_deliver_tap+0xcd/0xac0 ? netlink_deliver_tap+0x155/0xac0 ? _copy_from_iter+0x1bb/0x12c0 genl_rcv+0x24/0x40 netlink_unicast+0x440/0x700 ? netlink_attachskb+0x760/0x760 ? lock_acquire+0x1c2/0x530 ? __might_fault+0xbb/0x170 netlink_sendmsg+0x749/0xc10 ? netlink_unicast+0x700/0x700 ? __might_fault+0xbb/0x170 ? netlink_unicast+0x700/0x700 __sock_sendmsg+0xc5/0x190 ____sys_sendmsg+0x53f/0x760 ? import_iovec+0x7/0x10 ? kernel_sendmsg+0x30/0x30 ? __copy_msghdr+0x3c0/0x3c0 ? filter_irq_stacks+0x90/0x90 ? stack_depot_save_flags+0x28/0xa30 ___sys_sendmsg+0xeb/0x170 ? kasan_save_stack+0x30/0x40 ? copy_msghdr_from_user+0x110/0x110 ? do_syscall_64+0x6d/0x140 ? lock_acquire+0x1c2/0x530 ? __virt_addr_valid+0x116/0x3b0 ? __virt_addr_valid+0x1da/0x3b0 ? lock_downgrade+0x680/0x680 ? __delete_object+0x21/0x50 __sys_sendmsg+0xf7/0x180 ? __sys_sendmsg_sock+0x20/0x20 ? kmem_cache_free+0x14c/0x4e0 ? __x64_sys_close+0x78/0xd0 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7f855e113367 Code: 0e 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b9 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10 RSP: 002b:00007ffd15e90c88 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f855e113367 RDX: 0000000000000000 RSI: 00007ffd15e90cf0 RDI: 0000000000000004 RBP: 00007ffd15e90dbc R08: 0000000000000028 R09: 000000000045d100 R10: 00007f855e011dd8 R11: 0000000000000246 R12: 0000000000000019 R13: 0000000067c6b785 R14: 00000000004a1e80 R15: 0000000000000000 </TASK> Modules linked in: 8021q garp mrp sch_ingress openvswitch nsh mlx5_ib mlx5_fwctl mlx5_dpll mlx5_core rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm ib_uverbs ib_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry overlay zram zsmalloc fuse [last unloaded: mlx5_core] ---[ end trace 0000000000000000 ]--- Fixes: 8ff0ac5be144 ("net/mlx5: Add MACsec offload Tx command support") Signed-off-by: Carolina Jubran <cjubran@nvidia.com> Reviewed-by: Shahar Shitrit <shshitrit@nvidia.com> Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/1746958552-561295-1-git-send-email-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-13vsock/test: Fix occasional failure in SIOCOUTQ testsKonstantin Shkolnyy
These tests: "SOCK_STREAM ioctl(SIOCOUTQ) 0 unsent bytes" "SOCK_SEQPACKET ioctl(SIOCOUTQ) 0 unsent bytes" output: "Unexpected 'SIOCOUTQ' value, expected 0, got 64 (CLIENT)". They test that the SIOCOUTQ ioctl reports 0 unsent bytes after the data have been received by the other side. However, sometimes there is a delay in updating this "unsent bytes" counter, and the test fails even though the counter properly goes to 0 several milliseconds later. The delay occurs in the kernel because the used buffer notification callback virtio_vsock_tx_done(), called upon receipt of the data by the other side, doesn't update the counter itself. It delegates that to a kernel thread (via vsock->tx_work). Sometimes that thread is delayed more than the test expects. Change the test to poll SIOCOUTQ until it returns 0 or a timeout occurs. Signed-off-by: Konstantin Shkolnyy <kshk@linux.ibm.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Fixes: 18ee44ce97c1 ("test/vsock: add ioctl unsent bytes test") Link: https://patch.msgid.link/20250507151456.2577061-1-kshk@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-13tools: ynl-gen: Allow multi-attr without nested-attributes againLukas Wunner
Since commit ce6cb8113c84 ("tools: ynl-gen: individually free previous values on double set"), specifying the "multi-attr" property raises an error unless the "nested-attributes" property is specified as well: File "tools/net/ynl/./pyynl/ynl_gen_c.py", line 1147, in _load_nested_sets child = self.pure_nested_structs.get(nested) ^^^^^^ UnboundLocalError: cannot access local variable 'nested' where it is not associated with a value This appears to be a bug since there are existing specs which omit "nested-attributes" on "multi-attr" attributes. Also, according to Documentation/userspace-api/netlink/specs.rst, multi-attr "is the recommended way of implementing arrays (no extra nesting)", suggesting that nesting should even be avoided in favor of multi-attr. Fix the indentation of the if-block introduced by the commit to avoid the error. Fixes: ce6cb8113c84 ("tools: ynl-gen: individually free previous values on double set") Signed-off-by: Lukas Wunner <lukas@wunner.de> Link: https://patch.msgid.link/d6b58684b7e5bfb628f7313e6893d0097904e1d1.1746940107.git.lukas@wunner.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-13x86/its: Fix build errors when CONFIG_MODULES=nEric Biggers
Fix several build errors when CONFIG_MODULES=n, including the following: ../arch/x86/kernel/alternative.c:195:25: error: incomplete definition of type 'struct module' 195 | for (int i = 0; i < mod->its_num_pages; i++) { Fixes: 872df34d7c51 ("x86/its: Use dynamic thunks for indirect branches") Cc: stable@vger.kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Dave Hansen <dave.hansen@intel.com> Tested-by: Steven Rostedt (Google) <rostedt@goodmis.org> Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2025-05-13perf trace: Support --summary-mode=cgroupNamhyung Kim
Add a new summary mode to collect stats for each cgroup. $ sudo ./perf trace -as --bpf-summary --summary-mode=cgroup -- sleep 1 Summary of events: cgroup /user.slice/user-657345.slice/user@657345.service/session.slice/org.gnome.Shell@x11.service, 535 events syscall calls errors total min avg max stddev (msec) (msec) (msec) (msec) (%) --------------- -------- ------ -------- --------- --------- --------- ------ ppoll 15 0 373.600 0.004 24.907 197.491 55.26% poll 15 0 1.325 0.001 0.088 0.369 38.76% close 66 0 0.567 0.007 0.009 0.026 3.55% write 150 0 0.471 0.001 0.003 0.010 3.29% recvmsg 94 83 0.290 0.000 0.003 0.037 16.39% ioctl 26 0 0.237 0.001 0.009 0.096 50.13% timerfd_create 66 0 0.236 0.003 0.004 0.024 8.92% timerfd_settime 70 0 0.160 0.001 0.002 0.012 7.66% writev 10 0 0.118 0.001 0.012 0.019 18.17% read 9 0 0.021 0.001 0.002 0.004 14.07% getpid 14 0 0.019 0.000 0.001 0.004 20.28% cgroup /system.slice/polkit.service, 94 events syscall calls errors total min avg max stddev (msec) (msec) (msec) (msec) (%) --------------- -------- ------ -------- --------- --------- --------- ------ ppoll 22 0 19.811 0.000 0.900 9.273 63.88% write 30 0 0.040 0.001 0.001 0.003 12.09% recvmsg 12 0 0.018 0.001 0.002 0.006 28.15% read 18 0 0.013 0.000 0.001 0.003 21.99% poll 12 0 0.006 0.000 0.001 0.001 4.48% cgroup /user.slice/user-657345.slice/user@657345.service/app.slice/app-org.gnome.Terminal.slice/gnome-terminal-server.service, 21 events syscall calls errors total min avg max stddev (msec) (msec) (msec) (msec) (%) --------------- -------- ------ -------- --------- --------- --------- ------ ppoll 4 0 17.476 0.003 4.369 13.298 69.65% recvmsg 15 12 0.068 0.002 0.005 0.014 26.53% writev 1 0 0.033 0.033 0.033 0.033 0.00% poll 1 0 0.005 0.005 0.005 0.005 0.00% ... It works only for --bpf-summary for now. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Howard Chu <howardchu95@gmail.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <song@kernel.org> Link: https://lore.kernel.org/r/20250501225337.928470-1-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2025-05-13x86/CPU/AMD: Add X86_FEATURE_ZEN6Yazen Ghannam
Add a synthetic feature flag for Zen6. [ bp: Move the feature flag to a free slot and avoid future merge conflicts from incoming stuff. ] Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/20250513204857.3376577-1-yazen.ghannam@amd.com
2025-05-13perf report: Add 'tgid' sort keyNamhyung Kim
Sometimes we need to analyze the data in process level but current sort keys only work on thread level. Let's add 'tgid' sort key for that as 'pid' is already taken for thread. This will look mostly the same, but it only uses tgid instead of tid. Here's an example of a process with two threads (thloop). $ perf record -- perf test -w thloop $ perf report --stdio -s tgid,pid -H ... # # Overhead Tgid:Command / Pid:Command # ........... .......................... # 100.00% 2018407:perf 50.34% 2018407:perf 49.66% 2018409:perf Suggested-by: Stephane Eranian <eranian@google.com> Reviewed-by: Ian Rogers <irogers@google.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20250509210421.197245-1-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2025-05-13perf test: Update sysfs path for core PMU capsNamhyung Kim
While CPU is a system device, it'd be better to use a path for event_source devices when it checks PMU capability. Reviewed-by: Ian Rogers <irogers@google.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20250509213017.204343-2-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2025-05-13perf test: Fix LBR test by ignoring idle taskNamhyung Kim
I found 'perf record LBR tests' failing due to empty branch stacks. $ perf test -v LBR ... LBR system wide any branch test Lowering default frequency rate from 4000 to 1000. Please consider tweaking /proc/sys/kernel/perf_event_max_sample_rate. [ perf record: Woken up 8 times to write data ] [ perf record: Captured and wrote 3.142 MB /tmp/__perf_test.perf.data.dgSBl (3572 samples) ] LBR system wide any branch test: 3572 samples LBR system wide any branch test [Failed empty br stack ratio exceed 2%: 3%] LBR system wide any call test Lowering default frequency rate from 4000 to 1000. Please consider tweaking /proc/sys/kernel/perf_event_max_sample_rate. [ perf record: Woken up 8 times to write data ] [ perf record: Captured and wrote 3.337 MB /tmp/__perf_test.perf.data.dgSBl (3967 samples) ] LBR system wide any call test: 3967 samples LBR system wide any call test [Failed empty br stack ratio exceed 2%: 9%] ... The failing cases were in system-wide mode and I realized that the samples were from the idle tasks (swapper). I suspect going to/from idle state may affect the LBR contents. If we can skip empty branch stacks from the idle tasks, the failure should go away. I can see the following output in perf report -D. $ perf report -D | grep -m5 -A3 'branch stack: nr:0' ... -- ... branch stack: nr:0 ... thread: swapper:0 ...... dso: /proc/kcore -- ... branch stack: nr:0 ... thread: swapper:0 ...... dso: /proc/kcore -- ... branch stack: nr:0 ... thread: DefaultEventMan:10282 ...... dso: /proc/kcore -- ... branch stack: nr:0 ... thread: swapper:0 ...... dso: /proc/kcore -- ... branch stack: nr:0 ... thread: swapper:0 ...... dso: /proc/kcore $ perf report -D | grep -c 'branch stack: nr:0' 145 $ perf report -D | grep -A3 'branch stack: nr:0' | grep thread | grep -c swapper i36 $ perf report -D | grep -A3 'branch stack: nr:0' | grep thread | grep -cv swapper 9 Reviewed-by: Ian Rogers <irogers@google.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20250509213017.204343-1-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2025-05-13perf tools: Fix arm64 source package buildJames Clark
Syscall tables are generated from rules in the kernel tree. Add the related files to the MANIFEST to fix the Perf source package build. Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com> Fixes: bfb713ea53c746b0 ("perf tools: Fix arm64 build by generating unistd_64.h") Signed-off-by: James Clark <james.clark@linaro.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20250513-james-perf-src-pkg-fix-v1-1-bcfd0486dbd6@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2025-05-13perf test: Hybrid improvements for metric value validation testIan Rogers
On my alderlake I currently see for the "perf metrics value validation" test: ``` Total Test Count: 142 Passed Test Count: 139 [ Metric Relationship Error: The collected value of metric ['tma_fetch_latency', 'tma_fetch_bandwidth', 'tma_frontend_bound'] is [31.137028] in workload(s): ['perf bench futex hash -r 2 -s'] but expected value range is [tma_frontend_bound, tma_frontend_bound] Relationship rule description: 'Sum of the level 2 children should equal level 1 parent', Metric Relationship Error: The collected value of metric ['tma_memory_bound', 'tma_core_bound', 'tma_backend_bound'] is [6.564442] in workload(s): ['perf bench futex hash -r 2 -s'] but expected value range is [tma_backend_bound, tma_backend_bound] Relationship rule description: 'Sum of the level 2 children should equal level 1 parent', Metric Relationship Error: The collected value of metric ['tma_light_operations', 'tma_heavy_operations', 'tma_retiring'] is [57.806179] in workload(s): ['perf bench futex hash -r 2 -s'] but expected value range is [tma_retiring, tma_retiring] Relationship rule description: 'Sum of the level 2 children should equal level 1 parent'] Metric validation return with erros. Please check metrics reported with errors. ``` I suspect it is due to two metrics for different CPU types being enabled. Add a -cputype option to avoid this. The test still fails with: ``` Total Test Count: 115 Passed Test Count: 114 [ Wrong Metric Value Error: The collected value of metric ['tma_l2_hit_latency'] is [117.947088] in workload(s): ['perf bench futex hash -r 2 -s'] but expected value range is [0, 100]] Metric validation return with errors. Please check metrics reported with errors. ``` which is a reproducible genuine error and likely requires a metric fix. Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Thomas Falcon <thomas.falcon@intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@linaro.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Weilin Wang <weilin.wang@intel.com> Link: https://lore.kernel.org/r/20250512184700.11691-2-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2025-05-13drm/xe: Fix the gem shrinker nameThomas Hellström
The xe buffer object shrinker name is visible in the <debugfs>/shrinker directory and most if not all other shinkers follow a naming convention that looks like <subsystem>-<driver>_<objects>:<unique> Follow the same convention for xe, changing the name to drm-xe_gem:<unique>. Other shrinkers typically use the device node for <unique> but since drm drivers typically don't have a single unique device- node, instead use the unique name in the drm device. Fixes: 00c8efc3180f ("drm/xe: Add a shrinker for xe bos") Cc: Matthew Brost <matthew.brost@intel.com> Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Francois Dugast <francois.dugast@intel.com> Link: https://lore.kernel.org/r/20250508112931.3347-1-thomas.hellstrom@linux.intel.com (cherry picked from commit 243bf99e2fe75edf8df1711c1377b6fc020b806c) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2025-05-13perf list: Display the PMU name associated with a perf metric in JSONIan Rogers
The 'perf stat --cputype' option can be used to filter which metrics will be applied, for this reason the JSON metrics have an associated PMU. List this PMU name in the 'perf list' output in JSON mode so that tooling may access it. An example of the new field is: ``` { "MetricGroup": "Backend", "MetricName": "tma_core_bound", "MetricExpr": "max(0, tma_backend_bound - tma_memory_bound)", "MetricThreshold": "tma_core_bound > 0.1 & tma_backend_bound > 0.2", "ScaleUnit": "100%", "BriefDescription": "This metric represents fraction of slots where ... "PublicDescription": "This metric represents fraction of slots where ... "Unit": "cpu_core" }, ``` Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@linaro.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Weilin Wang <weilin.wang@intel.com> Link: https://lore.kernel.org/r/20250512184700.11691-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2025-05-13perf metricgroup: Binary search when resolving referred to metricsIan Rogers
Unlike with events, metrics can be matched by name or a list of metric groups. However, when a metric refers to another metric it isn't referring to a group but the singular metric in question. Prior to this change every "id" in a metric expression is checked to see if it is a metric by scanning all the metrics in the metrics table. As the table is sorted my metric name we can speed the search in the resolution case by binary searching for the metric. Rename some of the metricgroup functions to make it clearer whether they match a metric by name or by both name and group. Before: ``` $ time perf test -v 10 10: PMU JSON event tests : 10.1: PMU event table sanity : Ok 10.2: PMU event map aliases : Ok 10.3: Parsing of PMU event table metrics : Ok 10.4: Parsing of PMU event table metrics with fake PMUs : Ok 10.5: Parsing of metric thresholds with fake PMUs : Ok real 0m15.972s user 0m13.176s sys 0m3.001s ``` After: ``` $ time perf test -v 10 10: PMU JSON event tests : 10.1: PMU event table sanity : Ok 10.2: PMU event map aliases : Ok 10.3: Parsing of PMU event table metrics : Ok 10.4: Parsing of PMU event table metrics with fake PMUs : Ok 10.5: Parsing of metric thresholds with fake PMUs : Ok real 0m5.343s user 0m1.871s sys 0m2.128s ``` Committer testing: root@number:~# grep -m1 'model name' /proc/cpuinfo model name : AMD Ryzen 9 9950X3D 16-Core Processor root@number:~# Before: root@number:~# time perf test "Parsing of PMU event table metrics" 10.3: Parsing of PMU event table metrics : Ok 10.4: Parsing of PMU event table metrics with fake PMUs : Ok real 0m9.286s user 0m9.354s sys 0m0.062s root@number:~# After: root@number:~# time perf test "Parsing of PMU event table metrics" 10.3: Parsing of PMU event table metrics : Ok 10.4: Parsing of PMU event table metrics with fake PMUs : Ok real 0m0.689s user 0m0.766s sys 0m0.042s root@number:~# time perf test 10 10: PMU JSON event tests : 10.1: PMU event table sanity : Ok 10.2: PMU event map aliases : Ok 10.3: Parsing of PMU event table metrics : Ok 10.4: Parsing of PMU event table metrics with fake PMUs : Ok 10.5: Parsing of metric thresholds with fake PMUs : Ok real 0m0.696s user 0m0.807s sys 0m0.064s root@number:~# Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@linaro.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Xu Yang <xu.yang_2@nxp.com> Link: https://lore.kernel.org/r/20250512194622.33258-4-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2025-05-13perf pmu: Change aliases from list to hashmapIan Rogers
Finding an alias for things like perf_pmu__have_event() would need to search the aliases list, whilst this happens relatively infrequently it can be a significant overhead in testing. Switch to using a hashmap. Move common initialization code to perf_pmu__init(). Refactor the test 'struct perf_pmu_test_pmu' to not have perf pmu within it to better support the perf_pmu__init() function. Before: ``` $ time perf test "Parsing of PMU event table metrics" 10.3: Parsing of PMU event table metrics : Ok 10.4: Parsing of PMU event table metrics with fake PMUs : Ok real 0m13.287s user 0m13.026s sys 0m0.532s ``` After: ``` $ time perf test "Parsing of PMU event table metrics" 10.3: Parsing of PMU event table metrics : Ok 10.4: Parsing of PMU event table metrics with fake PMUs : Ok real 0m13.011s user 0m12.885s sys 0m0.485s ``` Committer testing: root@number:~# grep -m1 'model name' /proc/cpuinfo model name : AMD Ryzen 9 9950X3D 16-Core Processor root@number:~# Before: root@number:~# time perf test "Parsing of PMU event table metrics" 10.3: Parsing of PMU event table metrics : Ok 10.4: Parsing of PMU event table metrics with fake PMUs : Ok real 0m9.296s user 0m9.361s sys 0m0.063s root@number:~# After: root@number:~# time perf test "Parsing of PMU event table metrics" 10.3: Parsing of PMU event table metrics : Ok 10.4: Parsing of PMU event table metrics with fake PMUs : Ok real 0m9.286s user 0m9.354s sys 0m0.062s root@number:~# Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@linaro.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Xu Yang <xu.yang_2@nxp.com> Link: https://lore.kernel.org/r/20250512194622.33258-3-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2025-05-13perf fncache: Switch to using hashmapIan Rogers
The existing fncache can get large in testing situations. As the bucket array is a fixed size this leads to it degrading to O(n) performance. Use a regular hashmap that can dynamically reallocate its array. Before: ``` $ time perf test "Parsing of PMU event table metrics" 10.3: Parsing of PMU event table metrics : Ok 10.4: Parsing of PMU event table metrics with fake PMUs : Ok real 0m14.132s user 0m17.806s sys 0m0.557s ``` After: ``` $ time perf test "Parsing of PMU event table metrics" 10.3: Parsing of PMU event table metrics : Ok 10.4: Parsing of PMU event table metrics with fake PMUs : Ok real 0m13.287s user 0m13.026s sys 0m0.532s ``` Committer notes: root@number:~# grep -m1 'model name' /proc/cpuinfo model name : AMD Ryzen 9 9950X3D 16-Core Processor root@number:~# Before: root@number:~# time perf test "Parsing of PMU event table metrics" 10.3: Parsing of PMU event table metrics : Ok 10.4: Parsing of PMU event table metrics with fake PMUs : Ok real 0m9.277s user 0m9.979s sys 0m0.055s root@number:~# After: root@number:~# time perf test "Parsing of PMU event table metrics" 10.3: Parsing of PMU event table metrics : Ok 10.4: Parsing of PMU event table metrics with fake PMUs : Ok real 0m9.296s user 0m9.361s sys 0m0.063s root@number:~# Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@linaro.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Xu Yang <xu.yang_2@nxp.com> Link: https://lore.kernel.org/r/20250512194622.33258-2-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2025-05-13Merge tag 'probes-fixes-v6.15-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull probes fixes from Masami Hiramatsu: - fprobe: Fix RCU warning message in list traversal fprobe_module_callback() using hlist_for_each_entry_rcu() traverse the fprobe list but it locks fprobe_mutex() instead of rcu lock because it is enough. So add lockdep_is_held() to avoid warning. - tracing: eprobe: Add missing trace_probe_log_clear for eprobe __trace_eprobe_create() uses trace_probe_log but forgot to clear it at exit. Add trace_probe_log_clear() calls. - tracing: probes: Fix possible race in trace_probe_log APIs trace_probe_log APIs are used in probe event (dynamic_events, kprobe_events and uprobe_events) creation. Only dynamic_events uses the dyn_event_ops_mutex mutex to serialize it. This makes kprobe and uprobe events to lock the same mutex to serialize its creation to avoid race in trace_probe_log APIs. * tag 'probes-fixes-v6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing: probes: Fix a possible race in trace_probe_log APIs tracing: add missing trace_probe_log_clear for eprobes tracing: fprobe: Fix RCU warning message in list traversal
2025-05-13drm/amd/display: Avoid flooding unnecessary info messagesWayne Lin
It's expected that we'll encounter temporary exceptions during aux transactions. Adjust logging from drm_info to drm_dbg_dp to prevent flooding with unnecessary log messages. Fixes: 3637e457eb00 ("drm/amd/display: Fix wrong handling for AUX_DEFER case") Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Link: https://lore.kernel.org/r/20250513032026.838036-1-Wayne.Lin@amd.com Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 9a9c3e1fe5256da14a0a307dff0478f90c55fc8c) Cc: stable@vger.kernel.org
2025-05-13drm/amd/display: Fix null check of pipe_ctx->plane_state for update_dchubp_dppMelissa Wen
Similar to commit 6a057072ddd1 ("drm/amd/display: Fix null check for pipe_ctx->plane_state in dcn20_program_pipe") that addresses a null pointer dereference on dcn20_update_dchubp_dpp. This is the same function hooked for update_dchubp_dpp in dcn401, with the same issue. Fix possible null pointer deference on dcn401_program_pipe too. Fixes: 63ab80d9ac0a ("drm/amd/display: DML2.1 Post-Si Cleanup") Signed-off-by: Melissa Wen <mwen@igalia.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit d8d47f739752227957d8efc0cb894761bfe1d879)
2025-05-13drm/amd/display: check stream id dml21 wrapper to get plane_idAurabindo Pillai
[Why & How] Fix a false positive warning which occurs due to lack of correct checks when querying plane_id in DML21. This fixes the warning when performing a mode1 reset (cat /sys/kernel/debug/dri/1/amdgpu_gpu_recover): [ 35.751250] WARNING: CPU: 11 PID: 326 at /tmp/amd.PHpyAl7v/amd/amdgpu/../display/dc/dml2/dml2_dc_resource_mgmt.c:91 dml2_map_dc_pipes+0x243d/0x3f40 [amdgpu] [ 35.751434] Modules linked in: amdgpu(OE) amddrm_ttm_helper(OE) amdttm(OE) amddrm_buddy(OE) amdxcp(OE) amddrm_exec(OE) amd_sched(OE) amdkcl(OE) drm_suballoc_helper drm_ttm_helper ttm drm_display_helper cec rc_core i2c_algo_bit rfcomm qrtr cmac algif_hash algif_skcipher af_alg bnep amd_atl intel_rapl_msr intel_rapl_common snd_hda_codec_hdmi snd_hda_intel edac_mce_amd snd_intel_dspcfg snd_intel_sdw_acpi snd_hda_codec kvm_amd snd_hda_core snd_hwdep snd_pcm kvm snd_seq_midi snd_seq_midi_event snd_rawmidi crct10dif_pclmul polyval_clmulni polyval_generic btusb ghash_clmulni_intel sha256_ssse3 btrtl sha1_ssse3 snd_seq btintel aesni_intel btbcm btmtk snd_seq_device crypto_simd sunrpc cryptd bluetooth snd_timer ccp binfmt_misc rapl snd i2c_piix4 wmi_bmof gigabyte_wmi k10temp i2c_smbus soundcore gpio_amdpt mac_hid sch_fq_codel msr parport_pc ppdev lp parport efi_pstore nfnetlink dmi_sysfs ip_tables x_tables autofs4 hid_generic usbhid hid crc32_pclmul igc ahci xhci_pci libahci xhci_pci_renesas video wmi [ 35.751501] CPU: 11 UID: 0 PID: 326 Comm: kworker/u64:9 Tainted: G OE 6.11.0-21-generic #21~24.04.1-Ubuntu [ 35.751504] Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE [ 35.751505] Hardware name: Gigabyte Technology Co., Ltd. X670E AORUS PRO X/X670E AORUS PRO X, BIOS F30 05/22/2024 [ 35.751506] Workqueue: amdgpu-reset-dev amdgpu_debugfs_reset_work [amdgpu] [ 35.751638] RIP: 0010:dml2_map_dc_pipes+0x243d/0x3f40 [amdgpu] [ 35.751794] Code: 6d 0c 00 00 8b 84 24 88 00 00 00 41 3b 44 9c 20 0f 84 fc 07 00 00 48 83 c3 01 48 83 fb 06 75 b3 4c 8b 64 24 68 4c 8b 6c 24 40 <0f> 0b b8 06 00 00 00 49 8b 94 24 a0 49 00 00 89 c3 83 f8 07 0f 87 [ 35.751796] RSP: 0018:ffffbfa3805d7680 EFLAGS: 00010246 [ 35.751798] RAX: 0000000000010000 RBX: 0000000000000006 RCX: 0000000000000000 [ 35.751799] RDX: 0000000000000000 RSI: 0000000000000005 RDI: 0000000000000000 [ 35.751800] RBP: ffffbfa3805d78f0 R08: 0000000000000000 R09: 0000000000000000 [ 35.751801] R10: 0000000000000000 R11: 0000000000000000 R12: ffffbfa383249000 [ 35.751802] R13: ffffa0e68f280000 R14: ffffbfa383249658 R15: 0000000000000000 [ 35.751803] FS: 0000000000000000(0000) GS:ffffa0edbe580000(0000) knlGS:0000000000000000 [ 35.751804] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 35.751805] CR2: 00005d847ef96c58 CR3: 000000041de3e000 CR4: 0000000000f50ef0 [ 35.751806] PKRU: 55555554 [ 35.751807] Call Trace: [ 35.751810] <TASK> [ 35.751816] ? show_regs+0x6c/0x80 [ 35.751820] ? __warn+0x88/0x140 [ 35.751822] ? dml2_map_dc_pipes+0x243d/0x3f40 [amdgpu] [ 35.751964] ? report_bug+0x182/0x1b0 [ 35.751969] ? handle_bug+0x6e/0xb0 [ 35.751972] ? exc_invalid_op+0x18/0x80 [ 35.751974] ? asm_exc_invalid_op+0x1b/0x20 [ 35.751978] ? dml2_map_dc_pipes+0x243d/0x3f40 [amdgpu] [ 35.752117] ? math_pow+0x48/0xa0 [amdgpu] [ 35.752256] ? srso_alias_return_thunk+0x5/0xfbef5 [ 35.752260] ? math_pow+0x48/0xa0 [amdgpu] [ 35.752400] ? srso_alias_return_thunk+0x5/0xfbef5 [ 35.752403] ? math_pow+0x11/0xa0 [amdgpu] [ 35.752524] ? srso_alias_return_thunk+0x5/0xfbef5 [ 35.752526] ? core_dcn4_mode_programming+0xe4d/0x20d0 [amdgpu] [ 35.752663] ? srso_alias_return_thunk+0x5/0xfbef5 [ 35.752669] dml21_validate+0x3d4/0x980 [amdgpu] Reviewed-by: Austin Zheng <austin.zheng@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit f8ad62c0a93e5dd94243e10f1b742232e4d6411e)
2025-05-13drm/amd/display: fix link_set_dpms_off multi-display MST corner caseGeorge Shen
[Why & How] When MST config is unplugged/replugged too quickly, it can potentially result in a scenario where previous DC state has not been reset before the HPD link detection sequence begins. In this case, driver will disable the streams/link prior to re-enabling the link for link training. There is a bug in the current logic that does not account for the fact that current_state can be released and cleared prior to swapping to a new state (resulting in the pipe_ctx stream pointers to be cleared) in between disabling streams. To resolve this, cache the original streams prior to committing any stream updates. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 1561782686ccc36af844d55d31b44c938dd412dc)
2025-05-13drm/amd/display: Defer BW-optimization-blocked DRR adjustmentsJohn Olender
[Why & How] Instead of dropping DRR updates, defer them. This fixes issues where monitor continues to see incorrect refresh rate after VRR was turned off by userspace. Fixes: 32953485c558 ("drm/amd/display: Do not update DRR while BW optimizations pending") Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3546 Reviewed-by: Sun peng Li <sunpeng.li@amd.com> Signed-off-by: John Olender <john.olender@gmail.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 53761b7ecd83e6fbb9f2206f8c980a6aa308c844) Cc: stable@vger.kernel.org
2025-05-13Revert: "drm/amd/display: Enable urgent latency adjustment on DCN35"Gabe Teeger
This reverts commit 756c85e4d0dd ("drm/amd/display: Enable urgent latency adjustment on DCN35") Reason for revert: Negative power impact. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Gabe Teeger <Gabe.Teeger@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 9334c491cd8f388232b9a187bf0ddb728482bd6f)
2025-05-13drm/amd/display: Correct the reply value when AUX write incompleteWayne Lin
[Why] Now forcing aux->transfer to return 0 when incomplete AUX write is inappropriate. It should return bytes have been transferred. [How] aux->transfer is asked not to change original msg except reply field of drm_dp_aux_msg structure. Copy the msg->buffer when it's write request, and overwrite the first byte when sink reply 1 byte indicating partially written byte number. Then we can return the correct value without changing the original msg. Fixes: 3637e457eb00 ("drm/amd/display: Fix wrong handling for AUX_DEFER case") Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Ray Wu <ray.wu@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 7ac37f0dcd2e0b729fa7b5513908dc8ab802b540) Cc: stable@vger.kernel.org
2025-05-13drm/amdgpu: fix incorrect MALL size for GFX1151Tim Huang
On GFX1151, the reported MALL cache size reflects only half of its actual size; this adjustment corrects the discrepancy. Signed-off-by: Tim Huang <tim.huang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 0a5c060b593ad152318f89e5564bfdfcff8a6ac0) Cc: stable@vger.kernel.org
2025-05-13drm/amdgpu: csa unmap use uninterruptible lockPhilip Yang
After process exit to unmap csa and free GPU vm, if signal is accepted and then waiting to take vm lock is interrupted and return, it causes memory leaking and below warning backtrace. Change to use uninterruptible wait lock fix the issue. WARNING: CPU: 69 PID: 167800 at amd/amdgpu/amdgpu_kms.c:1525 amdgpu_driver_postclose_kms+0x294/0x2a0 [amdgpu] Call Trace: <TASK> drm_file_free.part.0+0x1da/0x230 [drm] drm_close_helper.isra.0+0x65/0x70 [drm] drm_release+0x6a/0x120 [drm] amdgpu_drm_release+0x51/0x60 [amdgpu] __fput+0x9f/0x280 ____fput+0xe/0x20 task_work_run+0x67/0xa0 do_exit+0x217/0x3c0 do_group_exit+0x3b/0xb0 get_signal+0x14a/0x8d0 arch_do_signal_or_restart+0xde/0x100 exit_to_user_mode_loop+0xc1/0x1a0 exit_to_user_mode_prepare+0xf4/0x100 syscall_exit_to_user_mode+0x17/0x40 do_syscall_64+0x69/0xc0 Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 7dbbfb3c171a6f63b01165958629c9c26abf38ab) Cc: stable@vger.kernel.org
2025-05-13x86/sev: Make sure pages are not skipped during kdumpAshish Kalra
When shared pages are being converted to private during kdump, additional checks are performed. They include handling the case of a GHCB page being contained within a huge page. Currently, this check incorrectly skips a page just below the GHCB page from being transitioned back to private during kdump preparation. This skipped page causes a 0x404 #VC exception when it is accessed later while dumping guest memory for vmcore generation. Correct the range to be checked for GHCB contained in a huge page. Also, ensure that the skipped huge page containing the GHCB page is transitioned back to private by applying the correct address mask later when changing GHCBs to private at end of kdump preparation. [ bp: Massage commit message. ] Fixes: 3074152e56c9 ("x86/sev: Convert shared memory back to private on kexec") Signed-off-by: Ashish Kalra <ashish.kalra@amd.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Tested-by: Srikanth Aithal <sraithal@amd.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/20250506183529.289549-1-Ashish.Kalra@amd.com
2025-05-13x86/sev: Do not touch VMSA pages during SNP guest memory kdumpAshish Kalra
When kdump is running makedumpfile to generate vmcore and dump SNP guest memory it touches the VMSA page of the vCPU executing kdump. It then results in unrecoverable #NPF/RMP faults as the VMSA page is marked busy/in-use when the vCPU is running and subsequently a causes guest softlockup/hang. Additionally, other APs may be halted in guest mode and their VMSA pages are marked busy and touching these VMSA pages during guest memory dump will also cause #NPF. Issue AP_DESTROY GHCB calls on other APs to ensure they are kicked out of guest mode and then clear the VMSA bit on their VMSA pages. If the vCPU running kdump is an AP, mark it's VMSA page as offline to ensure that makedumpfile excludes that page while dumping guest memory. Fixes: 3074152e56c9 ("x86/sev: Convert shared memory back to private on kexec") Signed-off-by: Ashish Kalra <ashish.kalra@amd.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Tested-by: Srikanth Aithal <sraithal@amd.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/20250428214151.155464-1-Ashish.Kalra@amd.com
2025-05-13HID: bpf: abort dispatch if device destroyedRong Zhang
The current HID bpf implementation assumes no output report/request will go through it after hid_bpf_destroy_device() has been called. This leads to a bug that unplugging certain types of HID devices causes a cleaned- up SRCU to be accessed. The bug was previously a hidden failure until a recent x86 percpu change [1] made it access not-present pages. The bug will be triggered if the conditions below are met: A) a device under the driver has some LEDs on B) hid_ll_driver->request() is uninplemented (e.g., logitech-djreceiver) If condition A is met, hidinput_led_worker() is always scheduled *after* hid_bpf_destroy_device(). hid_destroy_device ` hid_bpf_destroy_device ` cleanup_srcu_struct(&hdev->bpf.srcu) ` hid_remove_device ` ... ` led_classdev_unregister ` led_trigger_set(led_cdev, NULL) ` led_set_brightness(led_cdev, LED_OFF) ` ... ` input_inject_event ` input_event_dispose ` hidinput_input_event ` schedule_work(&hid->led_work) [hidinput_led_worker] This is fine when condition B is not met, where hidinput_led_worker() calls hid_ll_driver->request(). This is the case for most HID drivers, which implement it or use the generic one from usbhid. The driver itself or an underlying driver will then abort processing the request. Otherwise, hidinput_led_worker() tries hid_hw_output_report() and leads to the bug. hidinput_led_worker ` hid_hw_output_report ` dispatch_hid_bpf_output_report ` srcu_read_lock(&hdev->bpf.srcu) ` srcu_read_unlock(&hdev->bpf.srcu, idx) The bug has existed since the introduction [2] of dispatch_hid_bpf_output_report(). However, the same bug also exists in dispatch_hid_bpf_raw_requests(), and I've reproduced (no visible effect because of the lack of [1], but confirmed bpf.destroyed == 1) the bug against the commit (i.e., the Fixes:) introducing the function. This is because hidinput_led_worker() falls back to hid_hw_raw_request() when hid_ll_driver->output_report() is uninplemented (e.g., logitech- djreceiver). hidinput_led_worker ` hid_hw_output_report: -ENOSYS ` hid_hw_raw_request ` dispatch_hid_bpf_raw_requests ` srcu_read_lock(&hdev->bpf.srcu) ` srcu_read_unlock(&hdev->bpf.srcu, idx) Fix the issue by returning early in the two mentioned functions if hid_bpf has been marked as destroyed. Though dispatch_hid_bpf_device_event() handles input events, and there is no evidence that it may be called after the destruction, the same check, as a safety net, is also added to it to maintain the consistency among all dispatch functions. The impact of the bug on other architectures is unclear. Even if it acts as a hidden failure, this is still dangerous because it corrupts whatever is on the address calculated by SRCU. Thus, CC'ing the stable list. [1]: commit 9d7de2aa8b41 ("x86/percpu/64: Use relative percpu offsets") [2]: commit 9286675a2aed ("HID: bpf: add HID-BPF hooks for hid_hw_output_report") Closes: https://lore.kernel.org/all/20250506145548.GGaBoi9Jzp3aeJizTR@fat_crate.local/ Fixes: 8bd0488b5ea5 ("HID: bpf: add HID-BPF hooks for hid_hw_raw_requests") Cc: stable@vger.kernel.org Signed-off-by: Rong Zhang <i@rong.moe> Tested-by: Petr Tesarik <petr@tesarici.cz> Link: https://patch.msgid.link/20250512152420.87441-1-i@rong.moe Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
2025-05-13net: dsa: b53: prevent standalone from trying to forward to other portsJonas Gorski
When bridged ports and standalone ports share a VLAN, e.g. via VLAN uppers, or untagged traffic with a vlan unaware bridge, the ASIC will still try to forward traffic to known FDB entries on standalone ports. But since the port VLAN masks prevent forwarding to bridged ports, this traffic will be dropped. This e.g. can be observed in the bridge_vlan_unaware ping tests, where this breaks pinging with learning on. Work around this by enabling the simplified EAP mode on switches supporting it for standalone ports, which causes the ASIC to redirect traffic of unknown source MAC addresses to the CPU port. Since standalone ports do not learn, there are no known source MAC addresses, so effectively this redirects all incoming traffic to the CPU port. Fixes: ff39c2d68679 ("net: dsa: b53: Add bridge support") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://patch.msgid.link/20250508091424.26870-1-jonas.gorski@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-05-13tracing: probes: Fix a possible race in trace_probe_log APIsMasami Hiramatsu (Google)
Since the shared trace_probe_log variable can be accessed and modified via probe event create operation of kprobe_events, uprobe_events, and dynamic_events, it should be protected. In the dynamic_events, all operations are serialized by `dyn_event_ops_mutex`. But kprobe_events and uprobe_events interfaces are not serialized. To solve this issue, introduces dyn_event_create(), which runs create() operation under the mutex, for kprobe_events and uprobe_events. This also uses lockdep to check the mutex is held when using trace_probe_log* APIs. Link: https://lore.kernel.org/all/174684868120.551552.3068655787654268804.stgit@devnote2/ Reported-by: Paul Cacheux <paulcacheux@gmail.com> Closes: https://lore.kernel.org/all/20250510074456.805a16872b591e2971a4d221@kernel.org/ Fixes: ab105a4fb894 ("tracing: Use tracing error_log with probe events") Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
2025-05-13gpio: virtuser: fix potential out-of-bound writeMarkus Burri
If the caller wrote more characters, count is truncated to the max available space in "simple_write_to_buffer". Check that the input size does not exceed the buffer size. Write a zero termination afterwards. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202505091754.285hHbr2-lkp@intel.com/ Signed-off-by: Markus Burri <markus.burri@mt.com> Link: https://lore.kernel.org/r/20250509150459.115489-1-markus.burri@mt.com Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-05-13gpio: pca953x: fix IRQ storm on system wake upEmanuele Ghidoli
If an input changes state during wake-up and is used as an interrupt source, the IRQ handler reads the volatile input register to clear the interrupt mask and deassert the IRQ line. However, the IRQ handler is triggered before access to the register is granted, causing the read operation to fail. As a result, the IRQ handler enters a loop, repeatedly printing the "failed reading register" message, until `pca953x_resume()` is eventually called, which restores the driver context and enables access to registers. Fix by disabling the IRQ line before entering suspend mode, and re-enabling it after the driver context is restored in `pca953x_resume()`. An IRQ can be disabled with disable_irq() and still wake the system as long as the IRQ has wake enabled, so the wake-up functionality is preserved. Fixes: b76574300504 ("gpio: pca953x: Restore registers after suspend/resume cycle") Cc: stable@vger.kernel.org Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20250512095441.31645-1-francesco@dolcini.it Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-05-13ALSA: sh: SND_AICA should depend on SH_DMA_APIGeert Uytterhoeven
If CONFIG_SH_DMA_API=n: WARNING: unmet direct dependencies detected for G2_DMA Depends on [n]: SH_DREAMCAST [=y] && SH_DMA_API [=n] Selected by [y]: - SND_AICA [=y] && SOUND [=y] && SND [=y] && SND_SUPERH [=y] && SH_DREAMCAST [=y] SND_AICA selects G2_DMA. As the latter depends on SH_DMA_API, the former should depend on SH_DMA_API, too. Fixes: f477a538c14d07f8 ("sh: dma: fix kconfig dependency for G2_DMA") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202505131320.PzgTtl9H-lkp@intel.com/ Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://patch.msgid.link/b90625f8a9078d0d304bafe862cbe3a3fab40082.1747121335.git.geert+renesas@glider.be Signed-off-by: Takashi Iwai <tiwai@suse.de>
2025-05-13ALSA: usb-audio: Add sample rate quirk for Audioengine D1Christian Heusel
A user reported on the Arch Linux Forums that their device is emitting the following message in the kernel journal, which is fixed by adding the quirk as submitted in this patch: > kernel: usb 1-2: current rate 8436480 is different from the runtime rate 48000 There also is an entry for this product line added long time ago. Their specific device has the following ID: $ lsusb | grep Audio Bus 001 Device 002: ID 1101:0003 EasyPass Industrial Co., Ltd Audioengine D1 Link: https://bbs.archlinux.org/viewtopic.php?id=305494 Fixes: 93f9d1a4ac593 ("ALSA: usb-audio: Apply sample rate quirk for Audioengine D1") Cc: stable@vger.kernel.org Signed-off-by: Christian Heusel <christian@heusel.eu> Link: https://patch.msgid.link/20250512-audioengine-quirk-addition-v1-1-4c370af6eff7@heusel.eu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2025-05-13Merge branch 'address-eee-regressions-on-ksz-switches-since-v6-9-v6-14'Paolo Abeni
Oleksij Rempel says: ==================== address EEE regressions on KSZ switches since v6.9 (v6.14+) This patch series addresses a regression in Energy Efficient Ethernet (EEE) handling for KSZ switches with integrated PHYs, introduced in kernel v6.9 by commit fe0d4fd9285e ("net: phy: Keep track of EEE configuration"). The first patch updates the DSA driver to allow phylink to properly manage PHY EEE configuration. Since integrated PHYs handle LPI internally and ports without integrated PHYs do not document MAC-level LPI support, dummy MAC LPI callbacks are provided. The second patch removes outdated EEE workarounds from the micrel PHY driver, as they are no longer needed with correct phylink handling. This series addresses the regression for mainline and kernels starting from v6.14. It is not easily possible to fully fix older kernels due to missing infrastructure changes. Tested on KSZ9893 hardware. ==================== Link: https://patch.msgid.link/20250504081434.424489-1-o.rempel@pengutronix.de Signed-off-by: Paolo Abeni <pabeni@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-11 16:38:38 +0000