Age | Commit message (Collapse) | Author |
|
suspend"
Sean Nyekjaer <sean@geanix.com> says:
When downing the tcan4x5x there is no reason to keep the tcan4x5x in
"normal" mode and waste power. So set standby mode when the interface
is down and normal mode when interface is up.
Also when going into suspend, set the tcan4x5x into standby mode. The
tcan4x5x can still be used as a wake-source when in standby as low
power RX is enabled.
Link: https://patch.msgid.link/20241122-tcan-standby-v3-0-90bafaf5eccd@geanix.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
m_can user like the tcan4x5x device, can go into standby mode.
Low power RX mode is enabled to allow wake on can.
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Link: https://patch.msgid.link/20241122-tcan-standby-v3-3-90bafaf5eccd@geanix.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
At Vsup 12V, standby mode will save 7-8mA, when the interface is
down.
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Link: https://patch.msgid.link/20241122-tcan-standby-v3-2-90bafaf5eccd@geanix.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
This is added in preparation for calling standby mode in the tcan4x5x
driver or other users of m_can.
For the tcan4x5x; If Vsup 12V, standby mode will save 7-8mA, when the
interface is down.
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Link: https://patch.msgid.link/20241122-tcan-standby-v3-1-90bafaf5eccd@geanix.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
lib/muldi3.c:53:28: warning: asm output is not an lvalue
lib/muldi3.c:53:28: warning: asm output is not an lvalue
lib/muldi3.c:53:28: error: not addressable
lib/muldi3.c:53:28: warning: generating address of non-lvalue (11)
lib/muldi3.c:53:28: warning: generating address of non-lvalue (11)
Fix the lvalue warnings by replacing the casts on the output operands by
intermediate variables of the right type.
Fix the "not addressable" error by replacing the cast on the second
input operand by an intermediate variable, too. Treat the other input
operand the same for consistency.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501030516.uZrwnuQQ-lkp@intel.com/
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Greg Ungerer <gerg@linux-m68k.org>
Link: https://lore.kernel.org/c408cfb85bfde8929dcaa4ebea29ade4e1452d8e.1736356696.git.geert@linux-m68k.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
ipsec-next-2025-01-09
1) Implement the AGGFRAG protocol and basic IP-TFS (RFC9347) functionality.
From Christian Hopps.
2) Support ESN context update to hardware for TX.
From Jianbo Liu.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We have to lock the buffer before we can delete the dquot log item from
the buffer's log item list.
Cc: stable@vger.kernel.org # v6.13-rc3
Fixes: acc8f8628c3737 ("xfs: attach dquot buffer to dquot log item buffer")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
The use of of_property_read_bool() for non-boolean properties is
deprecated in favor of of_property_present() when testing for property
presence.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 493454445c95 ("drm/xe: switch to common PCI ID macros") removed
xe_pciids.h via drm-intel-next. In the mean time, commit ae78ec0a52c4
("drm/xe/ptl: Add another PTL PCI ID") added to xe_pciids.h via
drm-xe-next.
The two commits were merged in commit 8f109f287fdc ("Merge drm/drm-next
into drm-xe-next"), but xe_pciids.h wasn't removed, and the PCI ID
wasn't added to pciids.h.
Remove xe_pciids.h, and add the PCI ID to pciids.h.
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Fixes: 8f109f287fdc ("Merge drm/drm-next into drm-xe-next")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/r/20241125120921.1bbc1930@canb.auug.org.au
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250109105032.2585416-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Add vram based cgroup eviction to Xe.
Most hardware with VRAM uses TTM for its management, and can be
similarly trivially enabled.
Co-developed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20241204134410.1161769-5-dev@lankhorst.se
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
cgroup resource allocation has to be handled in TTM, so -EAGAIN from
cgroups can be converted into -ENOSPC, and the limitcg can be properly
evicted in ttm code.
When hitting a resource limit through -EAGAIN, the cgroup for which the
limit is hit is also returned. This allows eviction to delete only from
cgroups which are a subgroup of the current cgroup.
The returned CSS is used to determine if eviction is valuable for a
given resource, and allows TTM to only target specific resources to
lower memory usage.
Co-developed-by: Friedrich Vock <friedrich.vock@gmx.de>
Signed-off-by: Friedrich Vock <friedrich.vock@gmx.de>
Co-developed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20241204134410.1161769-4-dev@lankhorst.se
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
In the previous commit referenced below, I had to split
the short fops handling into different proxy fops. This
necessitated knowing out-of-band whether or not the ops
are short or full, when attempting to convert from fops
to allocated fsdata.
Unfortunately, I only converted full_proxy_open() which
is used for the new full_proxy_open_regular() and
full_proxy_open_short(), but forgot about the call in
open_proxy_open(), used for debugfs_create_file_unsafe().
Fix that, it never has short fops.
Fixes: f8f25893a477 ("fs: debugfs: differentiate short fops with proxy ops")
Reported-by: Suresh Kumar Kurmi <suresh.kumar.kurmi@intel.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202501101055.bb8bf3e7-lkp@intel.com
Reported-by: Venkat Rao Bagalkote <venkat88@linux.vnet.ibm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20250110085826.cd74f3b7a36b.I430c79c82ec3f954c2ff9665753bf6ac9e63eef8@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Max Makarov reported kernel panic [1] in perf user callchain code.
The reason for that is the race between uprobe_free_utask and bpf
profiler code doing the perf user stack unwind and is triggered
within uprobe_free_utask function:
- after current->utask is freed and
- before current->utask is set to NULL
general protection fault, probably for non-canonical address 0x9e759c37ee555c76: 0000 [#1] SMP PTI
RIP: 0010:is_uprobe_at_func_entry+0x28/0x80
...
? die_addr+0x36/0x90
? exc_general_protection+0x217/0x420
? asm_exc_general_protection+0x26/0x30
? is_uprobe_at_func_entry+0x28/0x80
perf_callchain_user+0x20a/0x360
get_perf_callchain+0x147/0x1d0
bpf_get_stackid+0x60/0x90
bpf_prog_9aac297fb833e2f5_do_perf_event+0x434/0x53b
? __smp_call_single_queue+0xad/0x120
bpf_overflow_handler+0x75/0x110
...
asm_sysvec_apic_timer_interrupt+0x1a/0x20
RIP: 0010:__kmem_cache_free+0x1cb/0x350
...
? uprobe_free_utask+0x62/0x80
? acct_collect+0x4c/0x220
uprobe_free_utask+0x62/0x80
mm_release+0x12/0xb0
do_exit+0x26b/0xaa0
__x64_sys_exit+0x1b/0x20
do_syscall_64+0x5a/0x80
It can be easily reproduced by running following commands in
separate terminals:
# while :; do bpftrace -e 'uprobe:/bin/ls:_start { printf("hit\n"); }' -c ls; done
# bpftrace -e 'profile:hz:100000 { @[ustack()] = count(); }'
Fixing this by making sure current->utask pointer is set to NULL
before we start to release the utask object.
[1] https://github.com/grafana/pyroscope/issues/3673
Fixes: cfa7f3d2c526 ("perf,x86: avoid missing caller address in stack traces captured in uprobe")
Reported-by: Max Makarov <maxpain@linux.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20250109141440.2692173-1-jolsa@kernel.org
|
|
Add support for Ayaneo Portable Game System.
System use 2 CS35L41 Amps with HDA, using Internal boost, with I2C
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250109165455.645810-1-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-fixes
Mediatek DRM Fixes - 20250104
1. Revert "drm/mediatek: dsi: Correct calculation formula of PHY Timing"
2. Set private->all_drm_private[i]->drm to NULL if mtk_drm_bind returns err
3. Move mtk_crtc_finish_page_flip() to ddp_cmdq_cb()
4. Only touch DISP_REG_OVL_PITCH_MSB if AFBC is supported
5. Add support for 180-degree rotation in the display driver
6. Stop selecting foreign drivers
7. Revert "drm/mediatek: Switch to for_each_child_of_node_scoped()"
8. Fix YCbCr422 color format issue for DP
9. Fix mode valid issue for dp
10. dp: Reference common DAI properties
11. dsi: Add registers to pdata to fix MT8186/MT8188
12. Remove unneeded semicolon
13. Add return value check when reading DPCD
14. Initialize pointer in mtk_drm_of_ddp_path_build_one()
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250104124227.45505-1-chunkuang.hu@kernel.org
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
Driver Changes:
- Avoid a NULL ptr deref when wedging (Lucas)
- Fix power gate sequence on DG1 (Rodrigo)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Z4AcqP3Io_r0pEsR@fedora
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.13-2025-01-09:
amdgpu:
- Display interrupt fixes
- Fix display max surface mismatches
- Fix divide error in DM plane scale calcs
- Display divide by 0 checks in dml helpers
- SMU 13 AD/DC interrrupt handling fix
- Fix locking around buddy trim handling
amdkfd:
- Fix page fault with shader debugger enabled
- Fix eviction fence wq handling
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250109164236.477295-1-alexander.deucher@amd.com
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes
- Revert "drm/i915/hdcp: Don't enable HDCP1.4 directly from check_link" [hdcp] (Suraj Kandpal)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tursulin@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Z37BPchEzY0ovIqF@linux
|
|
check_unreachable_inodes does work in online mode, with the one caveat
that it assumes check_dirents has also run - and check_dirents is not
PASS_ONLINE yet.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
No need to pull the whole alloc btree into the btree key cache.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This fixes various "dirent to missing inode" errors.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This fixes various locking asserts, and a null ptr deref in
bch2_btree_iter_peek_path().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Factor out a version of bch2_btree_pos_to_text() that doesn't take a
pointer to a in-memory btree node, to be used for btree node scrub.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Just emit a warning if errors=continue or fix_safe.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Factor out a small common helper.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
New helper for dropping all write locks; which is distinct from the
helper the transaction commit path uses, which is faster and only
touches updates.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Prep work for reworking btree node locking during interior btree
updates.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This is needed for the interior update locking rework, where we'll be
holding node write locks for the duration of the update - which is
needed for synchronizing with online check_allocations.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Now returns errors, prep work for check_allocations_done_lock
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
More asserts, more better.
Also, clean up the per-btree flags a bit.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The dirent that points to a subvolume root is in the parent subvolume.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
bch2_inum_path() should work even if the filesystem is corrupted - we
don't want it to cause fsck to fail.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
If the btree_path's lock seq is wrong, the next bch2_trans_relock()
operation is guaranteed to fail and we take an unnecessary transaction
restart.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
When evicting, we shouldn't leave a pointer to the key cache entry lying
around - that screws up btree path asserts we're adding.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Avoiding screwing up path->lock_seq.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Ensure that snapshot_tree.master_subvol is cleared when we delete the
master subvolume in a tree of snapshots, and allow for snapshot trees
that don't have a master subvolume in fsck.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Previously, fsck used the snapshot tree's master subvol for finding the
root inode number - but the master subvol might have been deleting, and
setting a new one should be a user operation; meaning we can't rely on
it existing.
Fortunately, for finding the root inode number in a tree of snapshots,
finding any associated subvolume works.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Add a version of kvmalloc() that doesn't have the INT_MAX limit; large
filesystems do hit this.
We'll want to get rid of the in-memory bucket gens array, but we're not
there quite yet.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We can't check if we're racing with fsck ending until mark_lock is held.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Locking considerations (possibly no longer relevant?) mean that when an
accounting update needs a new superblock replicas entry to be created,
it's deferred to the transaction commit error path.
But accounting updates for gc/fcsk aren't done from the transaction
commit path - so we need to handle
-BCH_ERR_btree_insert_need_mark_replicas locally.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
this addresses a key cache coherency bug
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
bch2_btree_iter_flags() now takes a level parameter; this fixes a bug
where using a node iterator on a leaf wouldn't set
BTREE_ITER_with_key_cache, leading to fun cache coherency bugs.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The btree node read error path already calls topology error, so this is
entirely redundant, and we're not specific enough about our error codes
- this was triggering for bucket_ref_update() errors.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Checking for writing past i_size after unlocking the folio and clearing
the dirty bit is racy, and we already check it at the start.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
In bcachefs, io_read and io_write counter record the amount
of data which has been read and written. They increase in
unit of sector, so to display correctly, they need to be
shifted to the left by the size of a sector. Other counters
like io_move, move_extent_{read, write, finish} also have
this problem.
In order to support different unit, we add extra column to
mark the counter type by using TYPE_COUNTER and TYPE_SECTORS
in BCH_PERSISTENT_COUNTERS().
Fixes: 1c6fdbd8f246 ("bcachefs: Initial commit")
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
It's time to make self healing the default: change the error action for
old filesystems to fix_safe, matching the default for current
filesystems.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|