summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-07-25media: ipu3-cio2: Parse information from firmware without using callbacksSakari Ailus
Instead of using the convenience function v4l2_async_notifier_parse_fwnode_endpoints(), parse the endpoints and set up the async sub-devices without using callbacks. While this adds a little bit of code, it makes parsing the endpoints quite a bit more simple and gives more control to the driver over the process. The parsing assumes D-PHY instead of letting the V4L2 fwnode framework guess it. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25media: ipu3-cio2: Proceed with notifier init even if there are no subdevsSakari Ailus
The notifier may be registered even if there are no subdevs. Do that to simplify the code. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25media: ipu3-cio2: Clean up notifier's subdev list if parsing endpoints failsSakari Ailus
The notifier must be cleaned up whenever parsing endpoints fails. Do that to avoid a memory leak in that case. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25media: v4l2-async: Safely clean up an uninitialised notifierSakari Ailus
Make the V4L2 async framework a bit more robust by allowing to clean up an uninitialised notifier. Otherwise the result would be a (close to) NULL pointer dereference. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25media: omap3isp: Rework OF endpoint parsingSakari Ailus
Rework OF endpoint parsing for the omap3isp driver. This does add some lines of code. The benefits are still clear: - the great complication related to callbacks in endpoint parsing is gone; instead endpoints are obtained port by port and - endpoints may now have a default bus configuration which was not possible while using callbacks. This driver does not benefit from that feature, but as the omap3isp is one of the exemplary drivers, this works as an example for driver developers. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25IB/mlx5: Fix RSS Toeplitz setup to be aligned with the HW specificationYishai Hadas
The specification for the Toeplitz function doesn't require to set the key explicitly to be symmetric. In case a symmetric functionality is required a symmetric key can be simply used. Wrongly forcing the algorithm to symmetric causes the wrong packet distribution and a performance degradation. Link: https://lore.kernel.org/r/20190723065733.4899-7-leon@kernel.org Cc: <stable@vger.kernel.org> # 4.7 Fixes: 28d6137008b2 ("IB/mlx5: Add RSS QP support") Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Reviewed-by: Alex Vainman <alexv@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-25IB/counters: Always initialize the port counter objectParav Pandit
Port counter objects should be initialized even if alloc_stats is unsupported, otherwise QP bind operations in user space can trigger a NULL pointer deference if they try to bind QP on RDMA device which doesn't support counters. Fixes: f34a55e497e8 ("RDMA/core: Get sum value of all counters when perform a sysfs stat read") Link: https://lore.kernel.org/r/20190723065733.4899-11-leon@kernel.org Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Mark Zhang <markz@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-25IB/core: Fix querying total rdma statsParav Pandit
rdma_counter_init() may fail for a device. In such case while calculating total sum, ignore NULL hstats. This fixes below observed call trace. BUG: kernel NULL pointer dereference, address: 00000000000000a0 PGD 8000001009b30067 P4D 8000001009b30067 PUD 10549c9067 PMD 0 Oops: 0000 [#1] SMP PTI CPU: 55 PID: 20887 Comm: cat Kdump: loaded Not tainted 5.2.0-rc6-jdc+ #13 RIP: 0010:rdma_counter_get_hwstat_value+0xf2/0x150 [ib_core] Call Trace: show_hw_stats+0x5e/0x130 [ib_core] dev_attr_show+0x15/0x50 sysfs_kf_seq_show+0xc6/0x1a0 seq_read+0x132/0x370 vfs_read+0x89/0x140 ksys_read+0x5c/0xd0 do_syscall_64+0x5a/0x240 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: f34a55e497e8 ("RDMA/core: Get sum value of all counters when perform a sysfs stat read") Link: https://lore.kernel.org/r/20190723065733.4899-10-leon@kernel.org Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Mark Zhang <markz@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-25IB/mlx5: Prevent concurrent MR updates during invalidationMoni Shoua
The device requires that memory registration work requests that update the address translation table of a MR will be fenced if posted together. This scenario can happen when address ranges are invalidated by the mmu in separate concurrent calls to the invalidation callback. We prefer to block concurrent address updates for a single MR over fencing since making the decision if a WQE needs fencing will be more expensive and fencing all WQEs is a too radical choice. Further, it isn't clear that this code can even run safely concurrently, so a lock is a safer choice. Fixes: b4cfe447d47b ("IB/mlx5: Implement on demand paging by adding support for MMU notifiers") Link: https://lore.kernel.org/r/20190723065733.4899-8-leon@kernel.org Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-25perf/x86/intel: Mark expected switch fall-throughsGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warnings: arch/x86/events/intel/core.c: In function ‘intel_pmu_init’: arch/x86/events/intel/core.c:4959:8: warning: this statement may fall through [-Wimplicit-fallthrough=] arch/x86/events/intel/core.c:5008:8: warning: this statement may fall through [-Wimplicit-fallthrough=] Warning level 3 was used: -Wimplicit-fallthrough=3 This patch is part of the ongoing efforts to enable -Wimplicit-fallthrough. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20190624161913.GA32270@embeddedor Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-25perf/core: Fix creating kernel counters for PMUs that override event->cpuLeonard Crestez
Some hardware PMU drivers will override perf_event.cpu inside their event_init callback. This causes a lockdep splat when initialized through the kernel API: WARNING: CPU: 0 PID: 250 at kernel/events/core.c:2917 ctx_sched_out+0x78/0x208 pc : ctx_sched_out+0x78/0x208 Call trace: ctx_sched_out+0x78/0x208 __perf_install_in_context+0x160/0x248 remote_function+0x58/0x68 generic_exec_single+0x100/0x180 smp_call_function_single+0x174/0x1b8 perf_install_in_context+0x178/0x188 perf_event_create_kernel_counter+0x118/0x160 Fix this by calling perf_install_in_context with event->cpu, just like perf_event_open Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Frank Li <Frank.li@nxp.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Link: https://lkml.kernel.org/r/c4ebe0503623066896d7046def4d6b1e06e0eb2e.1563972056.git.leonard.crestez@nxp.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-25perf/x86: Apply more accurate check on hypervisor platformZhenzhong Duan
check_msr is used to fix a bug report in guest where KVM doesn't support LBR MSR and cause #GP. The msr check is bypassed on real HW to workaround a false failure, see commit d0e1a507bdc7 ("perf/x86/intel: Disable check_msr for real HW") When running a guest with CONFIG_HYPERVISOR_GUEST not set or "nopv" enabled, current check isn't enough and #GP could trigger. Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/1564022366-18293-1-git-send-email-zhenzhong.duan@oracle.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-25perf/x86/intel: Fix invalid Bit 13 for Icelake MSR_OFFCORE_RSP_x registerYunying Sun
The Intel SDM states that bit 13 of Icelake's MSR_OFFCORE_RSP_x register is valid, and used for counting hardware generated prefetches of L3 cache. Update the bitmask to allow bit 13. Before: $ perf stat -e cpu/event=0xb7,umask=0x1,config1=0x1bfff/u sleep 3 Performance counter stats for 'sleep 3': <not supported> cpu/event=0xb7,umask=0x1,config1=0x1bfff/u After: $ perf stat -e cpu/event=0xb7,umask=0x1,config1=0x1bfff/u sleep 3 Performance counter stats for 'sleep 3': 9,293 cpu/event=0xb7,umask=0x1,config1=0x1bfff/u Signed-off-by: Yunying Sun <yunying.sun@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Kan Liang <kan.liang@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@kernel.org Cc: alexander.shishkin@linux.intel.com Cc: bp@alien8.de Cc: hpa@zytor.com Cc: jolsa@redhat.com Cc: namhyung@kernel.org Link: https://lkml.kernel.org/r/20190724082932.12833-1-yunying.sun@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-25perf/x86/intel: Fix SLOTS PEBS event constraintKan Liang
Sampling SLOTS event and ref-cycles event in a group on Icelake gives EINVAL. SLOTS event is the event stands for the fixed counter 3, not fixed counter 2. Wrong mask was set to SLOTS event in intel_icl_pebs_event_constraints[]. Reported-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 6017608936c1 ("perf/x86/intel: Add Icelake support") Link: https://lkml.kernel.org/r/20190723200429.8180-1-kan.liang@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-25locking/mutex: Test for initialized mutexSebastian Andrzej Siewior
An uninitialized/ zeroed mutex will go unnoticed because there is no check for it. There is a magic check in the unlock's slowpath path which might go unnoticed if the unlock happens in the fastpath. Add a ->magic check early in the mutex_lock() and mutex_trylock() path. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Will Deacon <will@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20190703092125.lsdf4gpsh2plhavb@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-25locking/lockdep: Clean up #ifdef checksArnd Bergmann
As Will Deacon points out, CONFIG_PROVE_LOCKING implies TRACE_IRQFLAGS, so the conditions I added in the previous patch, and some others in the same file can be simplified by only checking for the former. No functional change. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Will Deacon <will@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Bart Van Assche <bvanassche@acm.org> Cc: Frederic Weisbecker <frederic@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Waiman Long <longman@redhat.com> Cc: Yuyang Du <duyuyang@gmail.com> Fixes: 886532aee3cd ("locking/lockdep: Move mark_lock() inside CONFIG_TRACE_IRQFLAGS && CONFIG_PROVE_LOCKING") Link: https://lkml.kernel.org/r/20190628102919.2345242-1-arnd@arndb.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-25locking/lockdep: Hide unused 'class' variableArnd Bergmann
The usage is now hidden in an #ifdef, so we need to move the variable itself in there as well to avoid this warning: kernel/locking/lockdep_proc.c:203:21: error: unused variable 'class' [-Werror,-Wunused-variable] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Bart Van Assche <bvanassche@acm.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qian Cai <cai@lca.pw> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Waiman Long <longman@redhat.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Yuyang Du <duyuyang@gmail.com> Cc: frederic@kernel.org Fixes: 68d41d8c94a3 ("locking/lockdep: Fix lock used or unused stats error") Link: https://lkml.kernel.org/r/20190715092809.736834-1-arnd@arndb.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-25locking/rwsem: Add ACQUIRE commentsPeter Zijlstra
Since we just reviewed read_slowpath for ACQUIRE correctness, add a few coments to retain our findings. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Will Deacon <will@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-25tty/ldsem, locking/rwsem: Add missing ACQUIRE to read_failed sleep loopPeter Zijlstra
While reviewing rwsem down_slowpath, Will noticed ldsem had a copy of a bug we just found for rwsem. X = 0; CPU0 CPU1 rwsem_down_read() for (;;) { set_current_state(TASK_UNINTERRUPTIBLE); X = 1; rwsem_up_write(); rwsem_mark_wake() atomic_long_add(adjustment, &sem->count); smp_store_release(&waiter->task, NULL); if (!waiter.task) break; ... } r = X; Allows 'r == 0'. Reported-by: Will Deacon <will@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Will Deacon <will@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 4898e640caf0 ("tty: Add timed, writer-prioritized rw semaphore") Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-25lcoking/rwsem: Add missing ACQUIRE to read_slowpath sleep loopPeter Zijlstra
While reviewing another read_slowpath patch, both Will and I noticed another missing ACQUIRE, namely: X = 0; CPU0 CPU1 rwsem_down_read() for (;;) { set_current_state(TASK_UNINTERRUPTIBLE); X = 1; rwsem_up_write(); rwsem_mark_wake() atomic_long_add(adjustment, &sem->count); smp_store_release(&waiter->task, NULL); if (!waiter.task) break; ... } r = X; Allows 'r == 0'. Reported-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reported-by: Will Deacon <will@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Will Deacon <will@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-25locking/rwsem: Add missing ACQUIRE to read_slowpath exit when queue is emptyJan Stancek
LTP mtest06 has been observed to occasionally hit "still mapped when deleted" and following BUG_ON on arm64. The extra mapcount originated from pagefault handler, which handled pagefault for vma that has already been detached. vma is detached under mmap_sem write lock by detach_vmas_to_be_unmapped(), which also invalidates vmacache. When the pagefault handler (under mmap_sem read lock) calls find_vma(), vmacache_valid() wrongly reports vmacache as valid. After rwsem down_read() returns via 'queue empty' path (as of v5.2), it does so without an ACQUIRE on sem->count: down_read() __down_read() rwsem_down_read_failed() __rwsem_down_read_failed_common() raw_spin_lock_irq(&sem->wait_lock); if (list_empty(&sem->wait_list)) { if (atomic_long_read(&sem->count) >= 0) { raw_spin_unlock_irq(&sem->wait_lock); return sem; The problem can be reproduced by running LTP mtest06 in a loop and building the kernel (-j $NCPUS) in parallel. It does reproduces since v4.20 on arm64 HPE Apollo 70 (224 CPUs, 256GB RAM, 2 nodes). It triggers reliably in about an hour. The patched kernel ran fine for 10+ hours. Signed-off-by: Jan Stancek <jstancek@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Will Deacon <will@kernel.org> Acked-by: Waiman Long <longman@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dbueso@suse.de Fixes: 4b486b535c33 ("locking/rwsem: Exit read lock slowpath if queue empty & no writer") Link: https://lkml.kernel.org/r/50b8914e20d1d62bb2dee42d342836c2c16ebee7.1563438048.git.jstancek@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-25locking/rwsem: Don't call owner_on_cpu() on read-ownerWaiman Long
For writer, the owner value is cleared on unlock. For reader, it is left intact on unlock for providing better debugging aid on crash dump and the unlock of one reader may not mean the lock is free. As a result, the owner_on_cpu() shouldn't be used on read-owner as the task pointer value may not be valid and it might have been freed. That is the case in rwsem_spin_on_owner(), but not in rwsem_can_spin_on_owner(). This can lead to use-after-free error from KASAN. For example, BUG: KASAN: use-after-free in rwsem_down_write_slowpath (/home/miguel/kernel/linux/kernel/locking/rwsem.c:669 /home/miguel/kernel/linux/kernel/locking/rwsem.c:1125) Fix this by checking for RWSEM_READER_OWNED flag before calling owner_on_cpu(). Reported-by: Luis Henriques <lhenriques@suse.com> Tested-by: Luis Henriques <lhenriques@suse.com> Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jeff Layton <jlayton@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Will Deacon <will.deacon@arm.com> Cc: huang ying <huang.ying.caritas@gmail.com> Fixes: 94a9717b3c40e ("locking/rwsem: Make rwsem->owner an atomic_long_t") Link: https://lkml.kernel.org/r/81e82d5b-5074-77e8-7204-28479bbe0df0@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-25sched/fair: Use RCU accessors consistently for ->numa_groupJann Horn
The old code used RCU annotations and accessors inconsistently for ->numa_group, which can lead to use-after-frees and NULL dereferences. Let all accesses to ->numa_group use proper RCU helpers to prevent such issues. Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Fixes: 8c8a743c5087 ("sched/numa: Use {cpu, pid} to create task groups for shared faults") Link: https://lkml.kernel.org/r/20190716152047.14424-3-jannh@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-25sched/fair: Don't free p->numa_faults with concurrent readersJann Horn
When going through execve(), zero out the NUMA fault statistics instead of freeing them. During execve, the task is reachable through procfs and the scheduler. A concurrent /proc/*/sched reader can read data from a freed ->numa_faults allocation (confirmed by KASAN) and write it back to userspace. I believe that it would also be possible for a use-after-free read to occur through a race between a NUMA fault and execve(): task_numa_fault() can lead to task_numa_compare(), which invokes task_weight() on the currently running task of a different CPU. Another way to fix this would be to make ->numa_faults RCU-managed or add extra locking, but it seems easier to wipe the NUMA fault statistics on execve. Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Fixes: 82727018b0d3 ("sched/numa: Call task_numa_free() from do_execve()") Link: https://lkml.kernel.org/r/20190716152047.14424-1-jannh@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-25drm/tegra: Fix gpiod_get_from_of_node() regressionDmitry Osipenko
That function now returns ERR_PTR instead of NULL if "hpd-gpio" is not present in device-tree. The offending patch missed to adapt the Tegra's DRM driver for the API change. Fixes: 025bf37725f1 ("gpio: Fix return value mismatch of function gpiod_get_from_of_node()") Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-07-25test_firmware: fix a memory leak bugWenwen Wang
In test_firmware_init(), the buffer pointed to by the global pointer 'test_fw_config' is allocated through kzalloc(). Then, the buffer is initialized in __test_firmware_config_init(). In the case that the initialization fails, the following execution in test_firmware_init() needs to be terminated with an error code returned to indicate this failure. However, the allocated buffer is not freed on this execution path, leading to a memory leak bug. To fix the above issue, free the allocated buffer before returning from test_firmware_init(). Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu> Link: https://lore.kernel.org/r/1563084696-6865-1-git-send-email-wang6495@umn.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-25hpet: Fix division by zero in hpet_time_div()Kefeng Wang
The base value in do_div() called by hpet_time_div() is truncated from unsigned long to uint32_t, resulting in a divide-by-zero exception. UBSAN: Undefined behaviour in ../drivers/char/hpet.c:572:2 division by zero CPU: 1 PID: 23682 Comm: syz-executor.3 Not tainted 4.4.184.x86_64+ #4 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 0000000000000000 b573382df1853d00 ffff8800a3287b98 ffffffff81ad7561 ffff8800a3287c00 ffffffff838b35b0 ffffffff838b3860 ffff8800a3287c20 0000000000000000 ffff8800a3287bb0 ffffffff81b8f25e ffffffff838b35a0 Call Trace: [<ffffffff81ad7561>] __dump_stack lib/dump_stack.c:15 [inline] [<ffffffff81ad7561>] dump_stack+0xc1/0x120 lib/dump_stack.c:51 [<ffffffff81b8f25e>] ubsan_epilogue+0x12/0x8d lib/ubsan.c:166 [<ffffffff81b900cb>] __ubsan_handle_divrem_overflow+0x282/0x2c8 lib/ubsan.c:262 [<ffffffff823560dd>] hpet_time_div drivers/char/hpet.c:572 [inline] [<ffffffff823560dd>] hpet_ioctl_common drivers/char/hpet.c:663 [inline] [<ffffffff823560dd>] hpet_ioctl_common.cold+0xa8/0xad drivers/char/hpet.c:577 [<ffffffff81e63d56>] hpet_ioctl+0xc6/0x180 drivers/char/hpet.c:676 [<ffffffff81711590>] vfs_ioctl fs/ioctl.c:43 [inline] [<ffffffff81711590>] file_ioctl fs/ioctl.c:470 [inline] [<ffffffff81711590>] do_vfs_ioctl+0x6e0/0xf70 fs/ioctl.c:605 [<ffffffff81711eb4>] SYSC_ioctl fs/ioctl.c:622 [inline] [<ffffffff81711eb4>] SyS_ioctl+0x94/0xc0 fs/ioctl.c:613 [<ffffffff82846003>] tracesys_phase2+0x90/0x95 The main C reproducer autogenerated by syzkaller, syscall(__NR_mmap, 0x20000000, 0x1000000, 3, 0x32, -1, 0); memcpy((void*)0x20000100, "/dev/hpet\000", 10); syscall(__NR_openat, 0xffffffffffffff9c, 0x20000100, 0, 0); syscall(__NR_ioctl, r[0], 0x40086806, 0x40000000000000); Fix it by using div64_ul(). Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Zhang HongJun <zhanghongjun2@huawei.com> Cc: stable <stable@vger.kernel.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20190711132757.130092-1-wangkefeng.wang@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-25eeprom: make older eeprom drivers select NVMEM_SYSFSArseny Solokha
misc/eeprom/{at24,at25,eeprom_93xx46} drivers all register their corresponding devices in the nvmem framework in compat mode which requires nvmem sysfs interface to be present. The latter, however, has been split out from nvmem under a separate Kconfig in commit ae0c2d725512 ("nvmem: core: add NVMEM_SYSFS Kconfig"). As a result, probing certain I2C-attached EEPROMs now fails with at24: probe of 0-0050 failed with error -38 because of a stub implementation of nvmem_sysfs_setup_compat() in drivers/nvmem/nvmem.h. Update the nvmem dependency for these drivers so they could load again: at24 0-0050: 32768 byte 24c256 EEPROM, writable, 64 bytes/write Cc: Adrian Bunk <bunk@kernel.org> Cc: Bartosz Golaszewski <brgl@bgdev.pl> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: stable@vger.kernel.org # v5.2+ Signed-off-by: Arseny Solokha <asolokha@kb.kras.ru> Link: https://lore.kernel.org/r/20190716111236.27803-1-asolokha@kb.kras.ru Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-25media: v4l2-async: Add v4l2_async_notifier_add_fwnode_remote_subdevSakari Ailus
v4l2_async_notifier_add_fwnode_remote_subdev is a convenience function for parsing information on V4L2 fwnode subdevs. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25media: v4l2-async: Get fwnode reference when putting it to the notifier's listSakari Ailus
The v4l2_async_notifier_add_fwnode_subdev() did not take a reference of the added fwnode, relying on the caller to handle that instead, in essence putting the fwnode to be added if there was an error. As the reference is eventually released during the notifier cleanup, this is not intuitive nor logical. Improve this by always getting a reference when the function succeeds, and the caller releasing the reference when it does not *itself* need it anymore. Luckily, perhaps, there were just a handful of callers using the function. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25media: davinci-vpif: Don't dereference endpoint after putting it, fix ↵Sakari Ailus
refcounting The davinci-vpif driver dereferences its local endpoints after releasing the reference to them. The driver also puts its endpoints explicitly while the of_graph_get_next_endpoint() does that, too, leading to obtaining a reference once and releasing it twice. Both are fixed by this patch. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25vt: Grab console_lock around con_is_bound in show_bindDaniel Vetter
Not really harmful not to, but also not harm in grabbing the lock. And this shuts up a new WARNING I introduced in commit ddde3c18b700 ("vt: More locking checks"). Reported-by: Jens Remus <jremus@linux.ibm.com> Cc: linux-kernel@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linux-fbdev@vger.kernel.org Cc: linux-s390@vger.kernel.org Cc: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Martin Hostettler <textshell@uchuujin.de> Cc: Adam Borowski <kilobyte@angband.pl> Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Sam Ravnborg <sam@ravnborg.org> Fixes: ddde3c18b700 ("vt: More locking checks") Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Tested-by: Jens Remus <jremus@linux.ibm.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://lore.kernel.org/r/20190718080903.22622-1-daniel.vetter@ffwll.ch Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-25vmw_balloon: Remove Julien from the maintainers listNadav Amit
Julien will not be a maintainer anymore. Signed-off-by: Nadav Amit <namit@vmware.com> Link: https://lore.kernel.org/r/20190702100519.7464-1-namit@vmware.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-25staging: android: ion: Bail out upon SIGKILL when allocating memory.Tetsuo Handa
syzbot found that a thread can stall for minutes inside ion_system_heap_allocate() after that thread was killed by SIGKILL [1]. Let's check for SIGKILL before doing memory allocation. [1] https://syzkaller.appspot.com/bug?id=a0e3436829698d5824231251fad9d8e998f94f5e Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: stable <stable@vger.kernel.org> Reported-by: syzbot <syzbot+8ab2d0f39fb79fe6ca40@syzkaller.appspotmail.com> Acked-by: Laura Abbott <labbott@redhat.com> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Link: https://lore.kernel.org/r/d088f188-5f32-d8fc-b9a0-0b404f7501cc@I-love.SAKURA.ne.jp Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-25x86/speculation/mds: Apply more accurate check on hypervisor platformZhenzhong Duan
X86_HYPER_NATIVE isn't accurate for checking if running on native platform, e.g. CONFIG_HYPERVISOR_GUEST isn't set or "nopv" is enabled. Checking the CPU feature bit X86_FEATURE_HYPERVISOR to determine if it's running on native platform is more accurate. This still doesn't cover the platforms on which X86_FEATURE_HYPERVISOR is unsupported, e.g. VMware, but there is nothing which can be done about this scenario. Fixes: 8a4b06d391b0 ("x86/speculation/mds: Add sysfs reporting for MDS") Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/1564022349-17338-1-git-send-email-zhenzhong.duan@oracle.com
2019-07-25media: staging/intel-ipu3: Use dev_get_drvdata where possibleChuhong Yuan
Instead of using to_pci_dev + pci_get_drvdata, use dev_get_drvdata to make code simpler. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25media: v4l2-fwnode: Switch to use fwnode_property_count_uXX()Andy Shevchenko
Use fwnode_property_count_uXX() directly, that makes code neater. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25media: pci: Use dev_get_drvdata where possibleChuhong Yuan
Instead of using to_pci_dev + pci_get_drvdata, use dev_get_drvdata to make code simpler. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25media: ov2680: fix a typo in a function nameChristophe JAILLET
All functions in this file starts with 'ov2680_', except ov2860_parse_dt(). This is likely a typo. rename it to 'ov2680_parse_dt()' (6 and 8) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25media: Add support for Cadence CSI2TX 2.1Jan Kotas
This patch adds support for CSI2TX v2.1 version of the controller. Signed-off-by: Jan Kotas <jank@cadence.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25media: Fix Lane mapping in Cadence CSI2TXJan Kotas
This patch fixes mapping of lanes in DPHY_CFG register of the controller. In the register, bit 0 means first data lane. In Linux we currently assume lane 0 is clock. Signed-off-by: Jan Kotas <jank@cadence.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25media: Add lane checks for Cadence CSI2TXJan Kotas
This patch adds lane checks for CSI2TX, to prevent clock lane being used as a data lane. Signed-off-by: Jan Kotas <jank@cadence.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25media: dt-bindings: Update bindings for Cadence CSI2TX version 2.1Jan Kotas
This patch adds a DT bindings documentation for Cadence CSI2TX v2.1 controller. Signed-off-by: Jan Kotas <jank@cadence.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25media: i2c: ov5640: Fix the order for enabling regulatorsFabio Estevam
According to the OV5640 datasheet the following sequence needs to be followed when powering the OV5640 supplies: - DOVDD - AVDD - DVDD So follow this order inside the ov5640_supply_name[] array, so that the regulator_bulk() functions can enable the regulator in the correct sequence. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25media: i2c: ov5640: Check for devm_gpiod_get_optional() errorFabio Estevam
The power down and reset GPIO are optional, but the return value from devm_gpiod_get_optional() needs to be checked and propagated in the case of error, so that probe deferral can work. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25media: ov5645: Use regulator_bulk() functionsFabio Estevam
The code can be simplified by using the regulator_bulk() functions, so switch to it. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25media: ov5645: Remove unneeded regulator_set_voltage()Fabio Estevam
There is no need to call regulator_set_voltage() for each regulator that powers the camera. The voltage value for each regulator should be retrieved from the device tree, so remove the unneeded regulator_set_voltage(). Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25media: vivid: fix typo: use -> userHans Verkuil
Fix typo in two comments. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25media: staging: davinci: remove vpfe driverArnd Bergmann
The davinci_vpfe driver was merged into staging back in 2012 by Manjunath Hadli from TI, with a long TODO list. For all I can tell, since then it has only seen fixes for compile-time issues and global cleanups, but nobody has actually worked on the items on the TODO list. To make things worse, the driver in its current form is incompatible with the platform code in arch/arm/mach-davinci, i.e. the driver expects to get its platform_data passed to the device as a 'struct vpfe_config', but uses a differnet definition for that structure compared to what the platform uses. Finally, there is another driver for the same device in drivers/media/platform/davinci/vpfe_capture.c. From all I can tell, the staging version was originally a copy of a more featureful driver in TI's downstream kernels. However, that kernel no longer supports dm365 after linux-2.6.37, and the mainline version moved in a different direction. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25media: staging/media/bcm2048: remove driverHans Verkuil
This driver has seen no substantial effort to move it out of staging for 6 years. And after asking around nobody stepped up to do the remaining work. So remove it. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-15 20:42:02 +0000