summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-12-04netfilter: nft_set_hash: skip duplicated elements pending gc runPablo Neira Ayuso
rhashtable does not provide stable walk, duplicated elements are possible in case of resizing. I considered that checking for errors when calling rhashtable_walk_next() was sufficient to detect the resizing. However, rhashtable_walk_next() returns -EAGAIN only at the end of the iteration, which is too late, because a gc work containing duplicated elements could have been already scheduled for removal to the worker. Add a u32 gc worker sequence number per set, bump it on every workqueue run. Annotate gc worker sequence number on the expired element. Use it to skip those already seen in this gc workqueue run. Note that this new field is never reset in case gc transaction fails, so next gc worker run on the expired element overrides it. Wraparound of gc worker sequence number should not be an issue with stale gc worker sequence number in the element, that would just postpone the element removal in one gc run. Note that it is not possible to use flags to annotate that element is pending gc run to detect duplicates, given that gc transaction can be invalidated in case of update from the control plane, therefore, not allowing to clear such flag. On x86_64, pahole reports no changes in the size of nft_rhash_elem. Fixes: f6c383b8c31a ("netfilter: nf_tables: adapt set backend to use GC transaction API") Reported-by: Laurent Fasnacht <laurent.fasnacht@proton.ch> Tested-by: Laurent Fasnacht <laurent.fasnacht@proton.ch> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2024-12-04x86/cpu: Add Lunar Lake to list of CPUs with a broken MONITOR implementationLen Brown
Under some conditions, MONITOR wakeups on Lunar Lake processors can be lost, resulting in significant user-visible delays. Add Lunar Lake to X86_BUG_MONITOR so that wake_up_idle_cpu() always sends an IPI, avoiding this potential delay. Reported originally here: https://bugzilla.kernel.org/show_bug.cgi?id=219364 [ dhansen: tweak subject ] Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc:stable@vger.kernel.org Link: https://lore.kernel.org/all/a4aa8842a3c3bfdb7fe9807710eef159cbf0e705.1731463305.git.len.brown%40intel.com
2024-12-04fs/smb/client: avoid querying SMB2_OP_QUERY_WSL_EA for SMB3 POSIXRalph Boehme
Avoid extra roundtrip Cc: stable@vger.kernel.org Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com> Signed-off-by: Ralph Boehme <slow@samba.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2024-12-04Merge tag 'loongarch-fixes-6.13-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch fixes from Huacai Chen: "Fix bugs about EFI screen info, hugetlb pte clear and Lockdep-RCU splat in KVM, plus some trival cleanups" * tag 'loongarch-fixes-6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: LoongArch: KVM: Protect kvm_io_bus_{read,write}() with SRCU LoongArch: KVM: Protect kvm_check_requests() with SRCU LoongArch: BPF: Adjust the parameter of emit_jirl() LoongArch: Add architecture specific huge_pte_clear() LoongArch/irq: Use seq_put_decimal_ull_width() for decimal values LoongArch: Fix reserving screen info memory for above-4G firmware
2024-12-04Merge tag 'platform-drivers-x86-v6.13-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Ilpo Järvinen: - asus-nb-wmi: Silence unknown event warning when charger is plugged in - asus-wmi: Handle return code variations during thermal policy writing graciously - samsung-laptop: Correct module description * tag 'platform-drivers-x86-v6.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86: asus-nb-wmi: Ignore unknown event 0xCF platform/x86: asus-wmi: Ignore return value when writing thermal policy platform/x86: samsung-laptop: Match MODULE_DESCRIPTION() to functionality
2024-12-04scsi: scsi_debug: Fix hrtimer support for ndelayJohn Garry
Since commit 771f712ba5b0 ("scsi: scsi_debug: Fix cmd duration calculation"), ns_from_boot value is only evaluated in schedule_resp() for polled requests. However, ns_from_boot is also required for hrtimer support for when ndelay is less than INCLUSIVE_TIMING_MAX_NS, so fix up the logic to decide when to evaluate ns_from_boot. Fixes: 771f712ba5b0 ("scsi: scsi_debug: Fix cmd duration calculation") Signed-off-by: John Garry <john.g.garry@oracle.com> Link: https://lore.kernel.org/r/20241202130045.2335194-1-john.g.garry@oracle.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-12-04scsi: storvsc: Do not flag MAINTENANCE_IN return of SRB_STATUS_DATA_OVERRUN ↵Cathy Avery
as an error This partially reverts commit 812fe6420a6e ("scsi: storvsc: Handle additional SRB status values"). HyperV does not support MAINTENANCE_IN resulting in FC passthrough returning the SRB_STATUS_DATA_OVERRUN value. Now that SRB_STATUS_DATA_OVERRUN is treated as an error, multipath ALUA paths go into a faulty state as multipath ALUA submits RTPG commands via MAINTENANCE_IN. [ 3.215560] hv_storvsc 1d69d403-9692-4460-89f9-a8cbcc0f94f3: tag#230 cmd 0xa3 status: scsi 0x0 srb 0x12 hv 0xc0000001 [ 3.215572] scsi 1:0:0:32: alua: rtpg failed, result 458752 Make MAINTENANCE_IN return success to avoid the error path as is currently done with INQUIRY and MODE_SENSE. Suggested-by: Michael Kelley <mhklinux@outlook.com> Signed-off-by: Cathy Avery <cavery@redhat.com> Link: https://lore.kernel.org/r/20241127181324.3318443-1-cavery@redhat.com Reviewed-by: Michael Kelley <mhklinux@outlook.com> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-12-04scsi: ufs: core: Add missing post notify for power mode changePeter Wang
When the power mode change is successful but the power mode hasn't actually changed, the post notification was missed. Similar to the approach with hibernate/clock scale/hce enable, having pre/post notifications in the same function will make it easier to maintain. Additionally, supplement the description of power parameters for the pwr_change_notify callback. Fixes: 7eb584db73be ("ufs: refactor configuring power mode") Cc: stable@vger.kernel.org #6.11.x Signed-off-by: Peter Wang <peter.wang@mediatek.com> Link: https://lore.kernel.org/r/20241122024943.30589-1-peter.wang@mediatek.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-12-04scsi: sg: Fix slab-use-after-free read in sg_release()Suraj Sonawane
Fix a use-after-free bug in sg_release(), detected by syzbot with KASAN: BUG: KASAN: slab-use-after-free in lock_release+0x151/0xa30 kernel/locking/lockdep.c:5838 __mutex_unlock_slowpath+0xe2/0x750 kernel/locking/mutex.c:912 sg_release+0x1f4/0x2e0 drivers/scsi/sg.c:407 In sg_release(), the function kref_put(&sfp->f_ref, sg_remove_sfp) is called before releasing the open_rel_lock mutex. The kref_put() call may decrement the reference count of sfp to zero, triggering its cleanup through sg_remove_sfp(). This cleanup includes scheduling deferred work via sg_remove_sfp_usercontext(), which ultimately frees sfp. After kref_put(), sg_release() continues to unlock open_rel_lock and may reference sfp or sdp. If sfp has already been freed, this results in a slab-use-after-free error. Move the kref_put(&sfp->f_ref, sg_remove_sfp) call after unlocking the open_rel_lock mutex. This ensures: - No references to sfp or sdp occur after the reference count is decremented. - Cleanup functions such as sg_remove_sfp() and sg_remove_sfp_usercontext() can safely execute without impacting the mutex handling in sg_release(). The fix has been tested and validated by syzbot. This patch closes the bug reported at the following syzkaller link and ensures proper sequencing of resource cleanup and mutex operations, eliminating the risk of use-after-free errors in sg_release(). Reported-by: syzbot+7efb5850a17ba6ce098b@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=7efb5850a17ba6ce098b Tested-by: syzbot+7efb5850a17ba6ce098b@syzkaller.appspotmail.com Fixes: cc833acbee9d ("sg: O_EXCL and other lock handling") Signed-off-by: Suraj Sonawane <surajsonawane0215@gmail.com> Link: https://lore.kernel.org/r/20241120125944.88095-1-surajsonawane0215@gmail.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-12-04scsi: ufs: core: sysfs: Prevent div by zeroGwendal Grignou
Prevent a division by 0 when monitoring is not enabled. Fixes: 1d8613a23f3c ("scsi: ufs: core: Introduce HBA performance monitor sysfs nodes") Cc: stable@vger.kernel.org Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Link: https://lore.kernel.org/r/20241120062522.917157-1-gwendal@chromium.org Reviewed-by: Can Guo <quic_cang@quicinc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-12-04scsi: qla2xxx: Update version to 10.02.09.400-kNilesh Javali
Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20241115130313.46826-8-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-12-04scsi: qla2xxx: Supported speed displayed incorrectly for VPortsAnil Gurumurthy
The fc_function_template for vports was missing the .show_host_supported_speeds. The base port had the same. Add .show_host_supported_speeds to the vport template as well. Cc: stable@vger.kernel.org Fixes: 2c3dfe3f6ad8 ("[SCSI] qla2xxx: add support for NPIV") Signed-off-by: Anil Gurumurthy <agurumurthy@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20241115130313.46826-7-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-12-04scsi: qla2xxx: Fix NVMe and NPIV connect issueQuinn Tran
NVMe controller fails to send connect command due to failure to locate hw context buffer for NVMe queue 0 (blk_mq_hw_ctx, hctx_idx=0). The cause of the issue is NPIV host did not initialize the vha->irq_offset field. This field is given to blk-mq (blk_mq_pci_map_queues) to help locate the beginning of IO Queues which in turn help locate NVMe queue 0. Initialize this field to allow NVMe to work properly with NPIV host. kernel: nvme nvme5: Connect command failed, errno: -18 kernel: nvme nvme5: qid 0: secure concatenation is not supported kernel: nvme nvme5: NVME-FC{5}: create_assoc failed, assoc_id 2e9100 ret 401 kernel: nvme nvme5: NVME-FC{5}: reset: Reconnect attempt failed (401) kernel: nvme nvme5: NVME-FC{5}: Reconnect attempt in 2 seconds Cc: stable@vger.kernel.org Fixes: f0783d43dde4 ("scsi: qla2xxx: Use correct number of vectors for online CPUs") Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20241115130313.46826-6-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-12-04scsi: qla2xxx: Remove check req_sg_cnt should be equal to rsp_sg_cntSaurav Kashyap
Firmware supports multiple sg_cnt for request and response for CT commands, so remove the redundant check. A check is there where sg_cnt for request and response should be same. This is not required as driver and FW have code to handle multiple and different sg_cnt on request and response. Cc: stable@vger.kernel.org Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20241115130313.46826-5-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-12-04nvme-tcp: simplify nvme_tcp_teardown_io_queues()Chunguang.xu
As nvme_tcp_teardown_io_queues() is the only one caller of nvme_tcp_destroy_admin_queue(), so we can merge it into nvme_tcp_teardown_io_queues() to simplify the code. Signed-off-by: Chunguang.xu <chunguang.xu@shopee.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Keith Busch <kbusch@kernel.org>
2024-12-04nvme-tcp: no need to quiesce admin_q in nvme_tcp_teardown_io_queues()Chunguang.xu
As we quiesce admin_q in nvme_tcp_teardown_admin_queue(), so we should no need to quiesce it in nvme_tcp_reaardown_io_queues(), make things simple. Signed-off-by: Chunguang.xu <chunguang.xu@shopee.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Keith Busch <kbusch@kernel.org>
2024-12-04nvme-rdma: unquiesce admin_q before destroy itChunguang.xu
Kernel will hang on destroy admin_q while we create ctrl failed, such as following calltrace: PID: 23644 TASK: ff2d52b40f439fc0 CPU: 2 COMMAND: "nvme" #0 [ff61d23de260fb78] __schedule at ffffffff8323bc15 #1 [ff61d23de260fc08] schedule at ffffffff8323c014 #2 [ff61d23de260fc28] blk_mq_freeze_queue_wait at ffffffff82a3dba1 #3 [ff61d23de260fc78] blk_freeze_queue at ffffffff82a4113a #4 [ff61d23de260fc90] blk_cleanup_queue at ffffffff82a33006 #5 [ff61d23de260fcb0] nvme_rdma_destroy_admin_queue at ffffffffc12686ce #6 [ff61d23de260fcc8] nvme_rdma_setup_ctrl at ffffffffc1268ced #7 [ff61d23de260fd28] nvme_rdma_create_ctrl at ffffffffc126919b #8 [ff61d23de260fd68] nvmf_dev_write at ffffffffc024f362 #9 [ff61d23de260fe38] vfs_write at ffffffff827d5f25 RIP: 00007fda7891d574 RSP: 00007ffe2ef06958 RFLAGS: 00000202 RAX: ffffffffffffffda RBX: 000055e8122a4d90 RCX: 00007fda7891d574 RDX: 000000000000012b RSI: 000055e8122a4d90 RDI: 0000000000000004 RBP: 00007ffe2ef079c0 R8: 000000000000012b R9: 000055e8122a4d90 R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000004 R13: 000055e8122923c0 R14: 000000000000012b R15: 00007fda78a54500 ORIG_RAX: 0000000000000001 CS: 0033 SS: 002b This due to we have quiesced admi_q before cancel requests, but forgot to unquiesce before destroy it, as a result we fail to drain the pending requests, and hang on blk_mq_freeze_queue_wait() forever. Here try to reuse nvme_rdma_teardown_admin_queue() to fix this issue and simplify the code. Fixes: 958dc1d32c80 ("nvme-rdma: add clean action for failed reconnection") Reported-by: Yingfu.zhou <yingfu.zhou@shopee.com> Signed-off-by: Chunguang.xu <chunguang.xu@shopee.com> Signed-off-by: Yue.zhao <yue.zhao@shopee.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Keith Busch <kbusch@kernel.org>
2024-12-04nvme-tcp: fix the memleak while create new ctrl failedChunguang.xu
Now while we create new ctrl failed, we have not free the tagset occupied by admin_q, here try to fix it. Fixes: fd1418de10b9 ("nvme-tcp: avoid open-coding nvme_tcp_teardown_admin_queue()") Signed-off-by: Chunguang.xu <chunguang.xu@shopee.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Keith Busch <kbusch@kernel.org>
2024-12-04scsi: qla2xxx: Fix use after free on unloadQuinn Tran
System crash is observed with stack trace warning of use after free. There are 2 signals to tell dpc_thread to terminate (UNLOADING flag and kthread_stop). On setting the UNLOADING flag when dpc_thread happens to run at the time and sees the flag, this causes dpc_thread to exit and clean up itself. When kthread_stop is called for final cleanup, this causes use after free. Remove UNLOADING signal to terminate dpc_thread. Use the kthread_stop as the main signal to exit dpc_thread. [596663.812935] kernel BUG at mm/slub.c:294! [596663.812950] invalid opcode: 0000 [#1] SMP PTI [596663.812957] CPU: 13 PID: 1475935 Comm: rmmod Kdump: loaded Tainted: G IOE --------- - - 4.18.0-240.el8.x86_64 #1 [596663.812960] Hardware name: HP ProLiant DL380p Gen8, BIOS P70 08/20/2012 [596663.812974] RIP: 0010:__slab_free+0x17d/0x360 ... [596663.813008] Call Trace: [596663.813022] ? __dentry_kill+0x121/0x170 [596663.813030] ? _cond_resched+0x15/0x30 [596663.813034] ? _cond_resched+0x15/0x30 [596663.813039] ? wait_for_completion+0x35/0x190 [596663.813048] ? try_to_wake_up+0x63/0x540 [596663.813055] free_task+0x5a/0x60 [596663.813061] kthread_stop+0xf3/0x100 [596663.813103] qla2x00_remove_one+0x284/0x440 [qla2xxx] Cc: stable@vger.kernel.org Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20241115130313.46826-3-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-12-04scsi: qla2xxx: Fix abort in bsg timeoutQuinn Tran
Current abort of bsg on timeout prematurely clears the outstanding_cmds[]. Abort does not allow FW to return the IOCB/SRB. In addition, bsg_job_done() is not called to return the BSG (i.e. leak). Abort the outstanding bsg/SRB and wait for the completion. The completion IOCB will wake up the bsg_timeout thread. If abort is not successful, then driver will forcibly call bsg_job_done() and free the srb. Err Inject: - qaucli -z - assign CT Passthru IOCB's NportHandle with another initiator nport handle to trigger timeout. Remote port will drop CT request. - bsg_job_done is properly called as part of cleanup kernel: qla2xxx [0000:21:00.1]-7012:7: qla2x00_process_ct : 286 : Error Inject. kernel: qla2xxx [0000:21:00.1]-7016:7: bsg rqst type: FC_BSG_HST_CT else type: 101 - loop-id=1 portid=fffffa. kernel: qla2xxx [0000:21:00.1]-70bb:7: qla24xx_bsg_timeout CMD timeout. bsg ptr ffff9971a42f0838 msgcode 80000004 vendor cmd fa010000 kernel: qla2xxx [0000:21:00.1]-507c:7: Abort command issued - hdl=4b, type=5 kernel: qla2xxx [0000:21:00.1]-5040:7: ELS-CT pass-through-ct pass-through error hdl=4b comp_status-status=0x5 error subcode 1=0x0 error subcode 2=0xaf882e80. kernel: qla2xxx [0000:21:00.1]-7009:7: qla2x00_bsg_job_done: sp hdl 4b, result=70000 bsg ptr ffff9971a42f0838 kernel: qla2xxx [0000:21:00.1]-802c:7: Aborting bsg ffff9971a42f0838 sp=ffff99760b87ba80 handle=4b rval=0 kernel: qla2xxx [0000:21:00.1]-708a:7: bsg abort success. bsg ffff9971a42f0838 sp=ffff99760b87ba80 handle=0x4b kernel: qla2xxx [0000:21:00.1]-7012:7: qla2x00_process_ct : 286 : Error Inject. kernel: qla2xxx [0000:21:00.1]-7016:7: bsg rqst type: FC_BSG_HST_CT else type: 101 - loop-id=1 portid=fffffa. kernel: qla2xxx [0000:21:00.1]-70bb:7: qla24xx_bsg_timeout CMD timeout. bsg ptr ffff9971a42f43b8 msgcode 80000004 vendor cmd fa010000 kernel: qla2xxx [0000:21:00.1]-7012:7: qla_bsg_found : 2206 : Error Inject 2. kernel: qla2xxx [0000:21:00.1]-802c:7: Aborting bsg ffff9971a42f43b8 sp=ffff99762c304440 handle=5e rval=5 kernel: qla2xxx [0000:21:00.1]-704f:7: bsg abort fail. bsg=ffff9971a42f43b8 sp=ffff99762c304440 rval=5. kernel: qla2xxx [0000:21:00.1]-7051:7: qla_bsg_found bsg_job_done : bsg ffff9971a42f43b8 result 0xfffffffa sp ffff99762c304440. Cc: stable@vger.kernel.org Fixes: c449b4198701 ("scsi: qla2xxx: Use QP lock to search for bsg") Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20241115130313.46826-2-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-12-04nvme-pci: don't use dma_alloc_noncontiguous with 0 merge boundaryChristoph Hellwig
Only call into nvme_alloc_host_mem_single which uses dma_alloc_noncontiguous when there is non-null dma merge boundary. Without this we'll call into dma_alloc_noncontiguous for device using dma-direct, which can work fine as long as the preferred size is below the MAX_ORDER of the page allocator, but blows up with a warning if it is too large. Fixes: 63a5c7a4b4c4 ("nvme-pci: use dma_alloc_noncontigous if possible") Reported-by: Leon Romanovsky <leon@kernel.org> Reported-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Leon Romanovsky <leon@kernel.org> Tested-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Signed-off-by: Keith Busch <kbusch@kernel.org>
2024-12-04scsi: mpi3mr: Update driver version to 8.12.0.3.50Ranjan Kumar
Update driver version to 8.12.0.3.50. Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com> Link: https://lore.kernel.org/r/20241110194405.10108-6-ranjan.kumar@broadcom.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-12-04scsi: mpi3mr: Handling of fault code for insufficient powerRanjan Kumar
Before retrying initialization, check and abort if the fault code indicates insufficient power. Also mark the controller as unrecoverable instead of issuing reset in the watch dog timer if the fault code indicates insufficient power. Signed-off-by: Prayas Patel <prayas.patel@broadcom.com> Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com> Link: https://lore.kernel.org/r/20241110194405.10108-5-ranjan.kumar@broadcom.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-12-04scsi: mpi3mr: Start controller indexing from 0Ranjan Kumar
Instead of displaying the controller index starting from '1' make the driver display the controller index starting from '0'. Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com> Link: https://lore.kernel.org/r/20241110194405.10108-4-ranjan.kumar@broadcom.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-12-04scsi: mpi3mr: Fix corrupt config pages PHY state is switched in sysfsRanjan Kumar
The driver, through the SAS transport, exposes a sysfs interface to enable/disable PHYs in a controller/expander setup. When multiple PHYs are disabled and enabled in rapid succession, the persistent and current config pages related to SAS IO unit/SAS Expander pages could get corrupted. Use separate memory for each config request. Signed-off-by: Prayas Patel <prayas.patel@broadcom.com> Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com> Link: https://lore.kernel.org/r/20241110194405.10108-3-ranjan.kumar@broadcom.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-12-04scsi: mpi3mr: Synchronize access to ioctl data bufferRanjan Kumar
The driver serializes ioctls through a mutex lock but access to the ioctl data buffer is not guarded by the mutex. This results in multiple user threads being able to write to the driver's ioctl buffer simultaneously. Protect the ioctl buffer with the ioctl mutex. Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com> Link: https://lore.kernel.org/r/20241110194405.10108-2-ranjan.kumar@broadcom.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-12-04nvmet: replace kmalloc + memset with kzalloc for data allocationYu-Chun Lin
cocci warnings: (new ones prefixed by >>) >> drivers/nvme/target/pr.c:831:8-15: WARNING: kzalloc should be used for data, instead of kmalloc/memset The pattern of using 'kmalloc' followed by 'memset' is replaced with 'kzalloc', which is functionally equivalent to 'kmalloc' + 'memset', but more efficient. 'kzalloc' automatically zeroes the allocated memory, making it a faster and more streamlined solution. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202411301434.LEckbcWx-lkp@intel.com/ Reviewed-by: Kuan-Wei Chiu <visitorckw@gmail.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Yu-Chun Lin <eleanor15x@gmail.com> Signed-off-by: Keith Busch <kbusch@kernel.org>
2024-12-04nvme-fabrics: handle zero MAXCMD without closing the connectionMaurizio Lombardi
The NVMe specification states that MAXCMD is mandatory for NVMe-over-Fabrics implementations. However, some NVMe/TCP and NVMe/FC arrays from major vendors have buggy firmware that reports MAXCMD as zero in the Identify Controller data structure. Currently, the implementation closes the connection in such cases, completely preventing the host from connecting to the target. Fix the issue by printing a clear error message about the firmware bug and allowing the connection to proceed. It assumes that the target supports a MAXCMD value of SQSIZE + 1. If any issues arise, the user can manually adjust SQSIZE to mitigate them. Fixes: 4999568184e5 ("nvme-fabrics: check max outstanding commands") Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Reviewed-by: Laurence Oberman <loberman@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org>
2024-12-04Merge branch 'fixes-for-stack-with-allow_ptr_leaks'Alexei Starovoitov
Kumar Kartikeya Dwivedi says: ==================== Fixes for stack with allow_ptr_leaks Two fixes for usability/correctness gaps when interacting with the stack without CAP_PERFMON (i.e. with allow_ptr_leaks = false). See the commits for details. I've verified that the tests fail when run without the fixes. Changelog: ---------- v3 -> v4 v3: https://lore.kernel.org/bpf/20241202083814.1888784-1-memxor@gmail.com * Address Andrii's comments * Fix bug paperered over by missing CAP_NET_ADMIN in verifier_mtu test * Add warning when undefined CAP_ constant is specified, and fail test * Reorder annotations to be more clear * Verify that fixes fail without patches again * Add Acked-by from Andrii v2 -> v3 v2: https://lore.kernel.org/bpf/20241127212026.3580542-1-memxor@gmail.com * Address comments from Eduard * Fix comment for mark_stack_slot_misc * We can simply always return early when stype == STACK_INVALID * Drop allow_ptr_leaks conditionals * Add Eduard's __caps_unpriv patch into the series * Convert test_verifier_mtu to use it * Move existing tests to __caps_unpriv annotation and verifier_spill_fill.c * Add Acked-by from Eduard v1 -> v2 v1: https://lore.kernel.org/bpf/20241127185135.2753982-1-memxor@gmail.com * Fix CI errors in selftest by removing dependence on BPF_ST ==================== Link: https://patch.msgid.link/20241204044757.1483141-1-memxor@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-12-04selftests/bpf: Add test for narrow spill into 64-bit spilled scalarKumar Kartikeya Dwivedi
Add a test case to verify that without CAP_PERFMON, the test now succeeds instead of failing due to a verification error. Acked-by: Eduard Zingerman <eddyz87@gmail.com> Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Link: https://lore.kernel.org/r/20241204044757.1483141-6-memxor@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-12-04selftests/bpf: Add test for reading from STACK_INVALID slotsKumar Kartikeya Dwivedi
Ensure that when CAP_PERFMON is dropped, and the verifier sees allow_ptr_leaks as false, we are not permitted to read from a STACK_INVALID slot. Without the fix, the test will report unexpected success in loading. Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Link: https://lore.kernel.org/r/20241204044757.1483141-5-memxor@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-12-04selftests/bpf: Introduce __caps_unpriv annotation for testsEduard Zingerman
Add a __caps_unpriv annotation so that tests requiring specific capabilities while dropping the rest can conveniently specify them during selftest declaration instead of munging with capabilities at runtime from the testing binary. While at it, let us convert test_verifier_mtu to use this new support instead. Since we do not want to include linux/capability.h, we only defined the four main capabilities BPF subsystem deals with in bpf_misc.h for use in tests. If the user passes a CAP_SYS_NICE or anything else that's not defined in the header, capability parsing code will return a warning. Also reject strtol returning 0. CAP_CHOWN = 0 but we'll never need to use it, and strtol doesn't errno on failed conversion. Fail the test in such a case. The original diff for this idea is available at link [0]. [0]: https://lore.kernel.org/bpf/a1e48f5d9ae133e19adc6adf27e19d585e06bab4.camel@gmail.com Signed-off-by: Eduard Zingerman <eddyz87@gmail.com> [ Kartikeya: rebase on bpf-next, add warn to parse_caps, convert test_verifier_mtu ] Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Link: https://lore.kernel.org/r/20241204044757.1483141-4-memxor@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-12-04bpf: Fix narrow scalar spill onto 64-bit spilled scalar slotsTao Lyu
When CAP_PERFMON and CAP_SYS_ADMIN (allow_ptr_leaks) are disabled, the verifier aims to reject partial overwrite on an 8-byte stack slot that contains a spilled pointer. However, in such a scenario, it rejects all partial stack overwrites as long as the targeted stack slot is a spilled register, because it does not check if the stack slot is a spilled pointer. Incomplete checks will result in the rejection of valid programs, which spill narrower scalar values onto scalar slots, as shown below. 0: R1=ctx() R10=fp0 ; asm volatile ( @ repro.bpf.c:679 0: (7a) *(u64 *)(r10 -8) = 1 ; R10=fp0 fp-8_w=1 1: (62) *(u32 *)(r10 -8) = 1 attempt to corrupt spilled pointer on stack processed 2 insns (limit 1000000) max_states_per_insn 0 total_states 0 peak_states 0 mark_read 0. Fix this by expanding the check to not consider spilled scalar registers when rejecting the write into the stack. Previous discussion on this patch is at link [0]. [0]: https://lore.kernel.org/bpf/20240403202409.2615469-1-tao.lyu@epfl.ch Fixes: ab125ed3ec1c ("bpf: fix check for attempt to corrupt spilled pointer") Acked-by: Eduard Zingerman <eddyz87@gmail.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Tao Lyu <tao.lyu@epfl.ch> Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Link: https://lore.kernel.org/r/20241204044757.1483141-3-memxor@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-12-04bpf: Don't mark STACK_INVALID as STACK_MISC in mark_stack_slot_miscKumar Kartikeya Dwivedi
Inside mark_stack_slot_misc, we should not upgrade STACK_INVALID to STACK_MISC when allow_ptr_leaks is false, since invalid contents shouldn't be read unless the program has the relevant capabilities. The relaxation only makes sense when env->allow_ptr_leaks is true. However, such conversion in privileged mode becomes unnecessary, as invalid slots can be read without being upgraded to STACK_MISC. Currently, the condition is inverted (i.e. checking for true instead of false), simply remove it to restore correct behavior. Fixes: eaf18febd6eb ("bpf: preserve STACK_ZERO slots on partial reg spills") Acked-by: Andrii Nakryiko <andrii@kernel.org> Reported-by: Tao Lyu <tao.lyu@epfl.ch> Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Link: https://lore.kernel.org/r/20241204044757.1483141-2-memxor@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-12-04tools/testing/selftests/bpf/test_tc_tunnel.sh: Fix wait for server bindMarco Leogrande
Commit f803bcf9208a ("selftests/bpf: Prevent client connect before server bind in test_tc_tunnel.sh") added code that waits for the netcat server to start before the netcat client attempts to connect to it. However, not all calls to 'server_listen' were guarded. This patch adds the existing 'wait_for_port' guard after the remaining call to 'server_listen'. Fixes: f803bcf9208a ("selftests/bpf: Prevent client connect before server bind in test_tc_tunnel.sh") Signed-off-by: Marco Leogrande <leogrande@google.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://lore.kernel.org/r/20241202204530.1143448-1-leogrande@google.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-12-04scsi: mpt3sas: Update driver version to 51.100.00.00Ranjan Kumar
Update driver version to 51.100.00.00. Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com> Link: https://lore.kernel.org/r/20241110173341.11595-3-ranjan.kumar@broadcom.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-12-04scsi: mpt3sas: Diag-Reset when Doorbell-In-Use bit is set during driver load ↵Ranjan Kumar
time Issue a Diag-Reset when the "Doorbell-In-Use" bit is set during the driver load/initialization. Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com> Link: https://lore.kernel.org/r/20241110173341.11595-2-ranjan.kumar@broadcom.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-12-04Merge branch 'irq-save-restore'Alexei Starovoitov
Kumar Kartikeya Dwivedi says: ==================== IRQ save/restore This set introduces support for managing IRQ state from BPF programs. Two new kfuncs, bpf_local_irq_save, and bpf_local_irq_restore are introduced to enable this functionality. Intended use cases are writing IRQ safe data structures (e.g. memory allocator) in BPF programs natively, and use in new spin locking primitives intended to be introduced in the next few weeks. The set begins with some refactoring patches before the actual functionality is introduced. Patch 1 consolidates all resource related state in bpf_verifier_state, and moves it out from bpf_func_state. Patch 2 refactor acquire and release functions for reference state to make them reusable without duplication for other resource types. After this, patch 3 refactors stack slot liveness marking logic to be shared between dynptr, and iterators, in preparation for introducing same logic for irq flag object on stack. Finally, patch 4 and 7 introduce the new kfuncs and their selftests. For more details, please inspect the patch commit logs. Patch 5 makes the error message in case of resource leaks under BPF_EXIT a bit clearer. Patch 6 expands coverage of existing preempt-disable selftest to cover sleepable kfuncs. See individual patches for more details. Changelog: ---------- v5 -> v6 v5: https://lore.kernel.org/bpf/20241129001632.3828611-1-memxor@gmail.com * Add Eduard's Acked-by on patch 2 * Remove gen_id parameter to acquire_reference_state (Alexei) * Remove space before REF_TYPE_LOCK (Alexei) * Fix link to v4 in changelog v4 -> v5 v4: https://lore.kernel.org/bpf/20241127213535.3657472-1-memxor@gmail.com * Do regno - 1 when printing argument * Pass verifier state explicitly into print_{insn,verifier}_state (Eduard) * Pass frameno instead of bpf_func_state (Eduard) * Move bpf_reference_state *refs after parent to fill two holes in bpf_verifier_state (Eduard). The hunk fixing that bug is in the commit adding IRQ save/restore kfuncs, as it is only needed then. * Fix bug in release_reference_state breaking stack property (Eduard) * Add selftest for triggering and reproducing bug found by Eduard irq_ooo_refs_array in final patch * Print insn_idx and active_irq_id on error (Eduard) * Add more acks v3 -> v4 v3: https://lore.kernel.org/bpf/20241127165846.2001009-1-memxor@gmail.com * Add yet another missing kfunc declaration to silence s390 CI v2 -> v3 v2: https://lore.kernel.org/bpf/20241127153306.1484562-1-memxor@gmail.com * Drop REF_TYPE_LOCK_MASK * Add kfunc declarations to selftest to silence s390 CI errors v1 -> v2 v1: https://lore.kernel.org/bpf/20241121005329.408873-1-memxor@gmail.com * Drop reference -> resource renaming in the verifier (Eduard, Alexei) * Change verifier log for check_resource_leak for BPF_EXIT (Eduard) * Remove id parameter from acquire_resource_state, read s->id (Eduard) * Rename erase to release for reference state (Eduard) * Move resource state to bpf_verifier_state (Eduard, Alexei) * Drop unnecessary casting to/from u64 in helpers (Eduard) * Add test for arg != PTR_TO_STACK (Eduard) * Drop now redundant tests (Eduard) * Address some other misc nits * Add Reviewed-by and Acked-by from Eduard ==================== Link: https://patch.msgid.link/20241204030400.208005-1-memxor@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-12-04selftests/bpf: Add IRQ save/restore testsKumar Kartikeya Dwivedi
Include tests that check for rejection in erroneous cases, like unbalanced IRQ-disabled counts, within and across subprogs, invalid IRQ flag state or input to kfuncs, behavior upon overwriting IRQ saved state on stack, interaction with sleepable kfuncs/helpers, global functions, and out of order restore. Include some success scenarios as well to demonstrate usage. #128/1 irq/irq_save_bad_arg:OK #128/2 irq/irq_restore_bad_arg:OK #128/3 irq/irq_restore_missing_2:OK #128/4 irq/irq_restore_missing_3:OK #128/5 irq/irq_restore_missing_3_minus_2:OK #128/6 irq/irq_restore_missing_1_subprog:OK #128/7 irq/irq_restore_missing_2_subprog:OK #128/8 irq/irq_restore_missing_3_subprog:OK #128/9 irq/irq_restore_missing_3_minus_2_subprog:OK #128/10 irq/irq_balance:OK #128/11 irq/irq_balance_n:OK #128/12 irq/irq_balance_subprog:OK #128/13 irq/irq_global_subprog:OK #128/14 irq/irq_restore_ooo:OK #128/15 irq/irq_restore_ooo_3:OK #128/16 irq/irq_restore_3_subprog:OK #128/17 irq/irq_restore_4_subprog:OK #128/18 irq/irq_restore_ooo_3_subprog:OK #128/19 irq/irq_restore_invalid:OK #128/20 irq/irq_save_invalid:OK #128/21 irq/irq_restore_iter:OK #128/22 irq/irq_save_iter:OK #128/23 irq/irq_flag_overwrite:OK #128/24 irq/irq_flag_overwrite_partial:OK #128/25 irq/irq_ooo_refs_array:OK #128/26 irq/irq_sleepable_helper:OK #128/27 irq/irq_sleepable_kfunc:OK #128 irq:OK Summary: 1/27 PASSED, 0 SKIPPED, 0 FAILED Acked-by: Eduard Zingerman <eddyz87@gmail.com> Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Link: https://lore.kernel.org/r/20241204030400.208005-8-memxor@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-12-04selftests/bpf: Expand coverage of preempt tests to sleepable kfuncKumar Kartikeya Dwivedi
For preemption-related kfuncs, we don't test their interaction with sleepable kfuncs (we do test helpers) even though the verifier has code to protect against such a pattern. Expand coverage of the selftest to include this case. Acked-by: Eduard Zingerman <eddyz87@gmail.com> Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Link: https://lore.kernel.org/r/20241204030400.208005-7-memxor@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-12-04bpf: Improve verifier log for resource leak on exitKumar Kartikeya Dwivedi
The verifier log when leaking resources on BPF_EXIT may be a bit confusing, as it's a problem only when finally existing from the main prog, not from any of the subprogs. Hence, update the verifier error string and the corresponding selftests matching on it. Acked-by: Eduard Zingerman <eddyz87@gmail.com> Suggested-by: Eduard Zingerman <eddyz87@gmail.com> Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Link: https://lore.kernel.org/r/20241204030400.208005-6-memxor@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-12-04bpf: Introduce support for bpf_local_irq_{save,restore}Kumar Kartikeya Dwivedi
Teach the verifier about IRQ-disabled sections through the introduction of two new kfuncs, bpf_local_irq_save, to save IRQ state and disable them, and bpf_local_irq_restore, to restore IRQ state and enable them back again. For the purposes of tracking the saved IRQ state, the verifier is taught about a new special object on the stack of type STACK_IRQ_FLAG. This is a 8 byte value which saves the IRQ flags which are to be passed back to the IRQ restore kfunc. Renumber the enums for REF_TYPE_* to simplify the check in find_lock_state, filtering out non-lock types as they grow will become cumbersome and is unecessary. To track a dynamic number of IRQ-disabled regions and their associated saved states, a new resource type RES_TYPE_IRQ is introduced, which its state management functions: acquire_irq_state and release_irq_state, taking advantage of the refactoring and clean ups made in earlier commits. One notable requirement of the kernel's IRQ save and restore API is that they cannot happen out of order. For this purpose, when releasing reference we keep track of the prev_id we saw with REF_TYPE_IRQ. Since reference states are inserted in increasing order of the index, this is used to remember the ordering of acquisitions of IRQ saved states, so that we maintain a logical stack in acquisition order of resource identities, and can enforce LIFO ordering when restoring IRQ state. The top of the stack is maintained using bpf_verifier_state's active_irq_id. To maintain the stack property when releasing reference states, we need to modify release_reference_state to instead shift the remaining array left using memmove instead of swapping deleted element with last that might break the ordering. A selftest to test this subtle behavior is added in late patches. The logic to detect initialized and unitialized irq flag slots, marking and unmarking is similar to how it's done for iterators. No additional checks are needed in refsafe for REF_TYPE_IRQ, apart from the usual check_id satisfiability check on the ref[i].id. We have to perform the same check_ids check on state->active_irq_id as well. To ensure we don't get assigned REF_TYPE_PTR by default after acquire_reference_state, if someone forgets to assign the type, let's also renumber the enum ref_state_type. This way any unassigned types get caught by refsafe's default switch statement, don't assume REF_TYPE_PTR by default. The kfuncs themselves are plain wrappers over local_irq_save and local_irq_restore macros. Acked-by: Eduard Zingerman <eddyz87@gmail.com> Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Link: https://lore.kernel.org/r/20241204030400.208005-5-memxor@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-12-04bpf: Refactor mark_{dynptr,iter}_readKumar Kartikeya Dwivedi
There is possibility of sharing code between mark_dynptr_read and mark_iter_read for updating liveness information of their stack slots. Consolidate common logic into mark_stack_slot_obj_read function in preparation for the next patch which needs the same logic for its own stack slots. Acked-by: Eduard Zingerman <eddyz87@gmail.com> Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Link: https://lore.kernel.org/r/20241204030400.208005-4-memxor@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-12-04bpf: Refactor {acquire,release}_reference_stateKumar Kartikeya Dwivedi
In preparation for introducing support for more reference types which have to add and remove reference state, refactor the acquire_reference_state and release_reference_state functions to share common logic. The acquire_reference_state function simply handles growing the acquired refs and returning the pointer to the new uninitialized element, which can be filled in by the caller. The release_reference_state function simply erases a reference state entry in the acquired_refs array and shrinks it. The callers are responsible for finding the suitable element by matching on various fields of the reference state and requesting deletion through this function. It is not supposed to be called directly. Existing callers of release_reference_state were using it to find and remove state for a given ref_obj_id without scrubbing the associated registers in the verifier state. Introduce release_reference_nomark to provide this functionality and convert callers. We now use this new release_reference_nomark function within release_reference as well. It needs to operate on a verifier state instead of taking verifier env as mark_ptr_or_null_regs requires operating on verifier state of the two branches of a NULL condition check, therefore env->cur_state cannot be used directly. Acked-by: Eduard Zingerman <eddyz87@gmail.com> Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Link: https://lore.kernel.org/r/20241204030400.208005-3-memxor@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-12-04bpf: Consolidate locks and reference state in verifier stateKumar Kartikeya Dwivedi
Currently, state for RCU read locks and preemption is in bpf_verifier_state, while locks and pointer reference state remains in bpf_func_state. There is no particular reason to keep the latter in bpf_func_state. Additionally, it is copied into a new frame's state and copied back to the caller frame's state everytime the verifier processes a pseudo call instruction. This is a bit wasteful, given this state is global for a given verification state / path. Move all resource and reference related state in bpf_verifier_state structure in this patch, in preparation for introducing new reference state types in the future. Since we switch print_verifier_state and friends to print using vstate, we now need to explicitly pass in the verifier state from the caller along with the bpf_func_state, so modify the prototype and callers to do so. To ensure func state matches the verifier state when we're printing data, take in frame number instead of bpf_func_state pointer instead and avoid inconsistencies induced by the caller. Acked-by: Eduard Zingerman <eddyz87@gmail.com> Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Link: https://lore.kernel.org/r/20241204030400.208005-2-memxor@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-12-04tracing: Fix cmp_entries_dup() to respect sort() comparison rulesKuan-Wei Chiu
The cmp_entries_dup() function used as the comparator for sort() violated the symmetry and transitivity properties required by the sorting algorithm. Specifically, it returned 1 whenever memcmp() was non-zero, which broke the following expectations: * Symmetry: If x < y, then y > x. * Transitivity: If x < y and y < z, then x < z. These violations could lead to incorrect sorting and failure to correctly identify duplicate elements. Fix the issue by directly returning the result of memcmp(), which adheres to the required comparison properties. Cc: stable@vger.kernel.org Fixes: 08d43a5fa063 ("tracing: Add lock-free tracing_map") Link: https://lore.kernel.org/20241203202228.1274403-1-visitorckw@gmail.com Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2024-12-04netfilter: ipset: Hold module reference while requesting a modulePhil Sutter
User space may unload ip_set.ko while it is itself requesting a set type backend module, leading to a kernel crash. The race condition may be provoked by inserting an mdelay() right after the nfnl_unlock() call. Fixes: a7b4f989a629 ("netfilter: ipset: IP set core support") Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2024-12-04spi: intel: Add Panther Lake SPI controller supportAapo Vienamo
The Panther Lake SPI controllers are compatible with the Cannon Lake controllers. Add support for following SPI controller device IDs: - H-series: 0xe323 - P-series: 0xe423 - U-series: 0xe423 Signed-off-by: Aapo Vienamo <aapo.vienamo@iki.fi> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Link: https://patch.msgid.link/20241204080208.1036537-1-mika.westerberg@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-12-04net: sched: fix ordering of qlen adjustmentLion Ackermann
Changes to sch->q.qlen around qdisc_tree_reduce_backlog() need to happen _before_ a call to said function because otherwise it may fail to notify parent qdiscs when the child is about to become empty. Signed-off-by: Lion Ackermann <nnamrec@gmail.com> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-12-04net: sched: fix erspan_opt settings in cls_flowerXin Long
When matching erspan_opt in cls_flower, only the (version, dir, hwid) fields are relevant. However, in fl_set_erspan_opt() it initializes all bits of erspan_opt and its mask to 1. This inadvertently requires packets to match not only the (version, dir, hwid) fields but also the other fields that are unexpectedly set to 1. This patch resolves the issue by ensuring that only the (version, dir, hwid) fields are configured in fl_set_erspan_opt(), leaving the other fields to 0 in erspan_opt. Fixes: 79b1011cb33d ("net: sched: allow flower to match erspan options") Reported-by: Shuang Li <shuali@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: Cong Wang <cong.wang@bytedance.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-15 10:01:06 +0000