summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-01-16net/mlx5e: Rely on reqid in IPsec tunnel modeLeon Romanovsky
All packet offloads SAs have reqid in it to make sure they have corresponding policy. While it is not strictly needed for transparent mode, it is extremely important in tunnel mode. In that mode, policy and SAs have different match criteria. Policy catches the whole subnet addresses, and SA catches the tunnel gateways addresses. The source address of such tunnel is not known during egress packet traversal in flow steering as it is added only after successful encryption. As reqid is required for packet offload and it is unique for every SA, we can safely rely on it only. The output below shows the configured egress policy and SA by strongswan: [leonro@vm ~]$ sudo ip x s src 192.169.101.2 dst 192.169.101.1 proto esp spi 0xc88b7652 reqid 1 mode tunnel replay-window 0 flag af-unspec esn aead rfc4106(gcm(aes)) 0xe406a01083986e14d116488549094710e9c57bc6 128 anti-replay esn context: seq-hi 0x0, seq 0x0, oseq-hi 0x0, oseq 0x0 replay_window 1, bitmap-length 1 00000000 crypto offload parameters: dev eth2 dir out mode packet [leonro@064 ~]$ sudo ip x p src 192.170.0.0/16 dst 192.170.0.0/16 dir out priority 383615 ptype main tmpl src 192.169.101.2 dst 192.169.101.1 proto esp spi 0xc88b7652 reqid 1 mode tunnel crypto offload parameters: dev eth2 mode packet Fixes: b3beba1fb404 ("net/mlx5e: Allow policies with reqid 0, to support IKE policy holes") Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-16net/mlx5e: Fix inversion dependency warning while enabling IPsec tunnelLeon Romanovsky
Attempt to enable IPsec packet offload in tunnel mode in debug kernel generates the following kernel panic, which is happening due to two issues: 1. In SA add section, the should be _bh() variant when marking SA mode. 2. There is not needed flush_workqueue in SA delete routine. It is not needed as at this stage as it is removed from SADB and the running work will be canceled later in SA free. ===================================================== WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected 6.12.0+ #4 Not tainted ----------------------------------------------------- charon/1337 [HC0[0]:SC0[4]:HE1:SE0] is trying to acquire: ffff88810f365020 (&xa->xa_lock#24){+.+.}-{3:3}, at: mlx5e_xfrm_del_state+0xca/0x1e0 [mlx5_core] and this task is already holding: ffff88813e0f0d48 (&x->lock){+.-.}-{3:3}, at: xfrm_state_delete+0x16/0x30 which would create a new lock dependency: (&x->lock){+.-.}-{3:3} -> (&xa->xa_lock#24){+.+.}-{3:3} but this new dependency connects a SOFTIRQ-irq-safe lock: (&x->lock){+.-.}-{3:3} ... which became SOFTIRQ-irq-safe at: lock_acquire+0x1be/0x520 _raw_spin_lock_bh+0x34/0x40 xfrm_timer_handler+0x91/0xd70 __hrtimer_run_queues+0x1dd/0xa60 hrtimer_run_softirq+0x146/0x2e0 handle_softirqs+0x266/0x860 irq_exit_rcu+0x115/0x1a0 sysvec_apic_timer_interrupt+0x6e/0x90 asm_sysvec_apic_timer_interrupt+0x16/0x20 default_idle+0x13/0x20 default_idle_call+0x67/0xa0 do_idle+0x2da/0x320 cpu_startup_entry+0x50/0x60 start_secondary+0x213/0x2a0 common_startup_64+0x129/0x138 to a SOFTIRQ-irq-unsafe lock: (&xa->xa_lock#24){+.+.}-{3:3} ... which became SOFTIRQ-irq-unsafe at: ... lock_acquire+0x1be/0x520 _raw_spin_lock+0x2c/0x40 xa_set_mark+0x70/0x110 mlx5e_xfrm_add_state+0xe48/0x2290 [mlx5_core] xfrm_dev_state_add+0x3bb/0xd70 xfrm_add_sa+0x2451/0x4a90 xfrm_user_rcv_msg+0x493/0x880 netlink_rcv_skb+0x12e/0x380 xfrm_netlink_rcv+0x6d/0x90 netlink_unicast+0x42f/0x740 netlink_sendmsg+0x745/0xbe0 __sock_sendmsg+0xc5/0x190 __sys_sendto+0x1fe/0x2c0 __x64_sys_sendto+0xdc/0x1b0 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&xa->xa_lock#24); local_irq_disable(); lock(&x->lock); lock(&xa->xa_lock#24); <Interrupt> lock(&x->lock); *** DEADLOCK *** 2 locks held by charon/1337: #0: ffffffff87f8f858 (&net->xfrm.xfrm_cfg_mutex){+.+.}-{4:4}, at: xfrm_netlink_rcv+0x5e/0x90 #1: ffff88813e0f0d48 (&x->lock){+.-.}-{3:3}, at: xfrm_state_delete+0x16/0x30 the dependencies between SOFTIRQ-irq-safe lock and the holding lock: -> (&x->lock){+.-.}-{3:3} ops: 29 { HARDIRQ-ON-W at: lock_acquire+0x1be/0x520 _raw_spin_lock_bh+0x34/0x40 xfrm_alloc_spi+0xc0/0xe60 xfrm_alloc_userspi+0x5f6/0xbc0 xfrm_user_rcv_msg+0x493/0x880 netlink_rcv_skb+0x12e/0x380 xfrm_netlink_rcv+0x6d/0x90 netlink_unicast+0x42f/0x740 netlink_sendmsg+0x745/0xbe0 __sock_sendmsg+0xc5/0x190 __sys_sendto+0x1fe/0x2c0 __x64_sys_sendto+0xdc/0x1b0 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 IN-SOFTIRQ-W at: lock_acquire+0x1be/0x520 _raw_spin_lock_bh+0x34/0x40 xfrm_timer_handler+0x91/0xd70 __hrtimer_run_queues+0x1dd/0xa60 hrtimer_run_softirq+0x146/0x2e0 handle_softirqs+0x266/0x860 irq_exit_rcu+0x115/0x1a0 sysvec_apic_timer_interrupt+0x6e/0x90 asm_sysvec_apic_timer_interrupt+0x16/0x20 default_idle+0x13/0x20 default_idle_call+0x67/0xa0 do_idle+0x2da/0x320 cpu_startup_entry+0x50/0x60 start_secondary+0x213/0x2a0 common_startup_64+0x129/0x138 INITIAL USE at: lock_acquire+0x1be/0x520 _raw_spin_lock_bh+0x34/0x40 xfrm_alloc_spi+0xc0/0xe60 xfrm_alloc_userspi+0x5f6/0xbc0 xfrm_user_rcv_msg+0x493/0x880 netlink_rcv_skb+0x12e/0x380 xfrm_netlink_rcv+0x6d/0x90 netlink_unicast+0x42f/0x740 netlink_sendmsg+0x745/0xbe0 __sock_sendmsg+0xc5/0x190 __sys_sendto+0x1fe/0x2c0 __x64_sys_sendto+0xdc/0x1b0 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 } ... key at: [<ffffffff87f9cd20>] __key.18+0x0/0x40 the dependencies between the lock to be acquired and SOFTIRQ-irq-unsafe lock: -> (&xa->xa_lock#24){+.+.}-{3:3} ops: 9 { HARDIRQ-ON-W at: lock_acquire+0x1be/0x520 _raw_spin_lock_bh+0x34/0x40 mlx5e_xfrm_add_state+0xc5b/0x2290 [mlx5_core] xfrm_dev_state_add+0x3bb/0xd70 xfrm_add_sa+0x2451/0x4a90 xfrm_user_rcv_msg+0x493/0x880 netlink_rcv_skb+0x12e/0x380 xfrm_netlink_rcv+0x6d/0x90 netlink_unicast+0x42f/0x740 netlink_sendmsg+0x745/0xbe0 __sock_sendmsg+0xc5/0x190 __sys_sendto+0x1fe/0x2c0 __x64_sys_sendto+0xdc/0x1b0 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 SOFTIRQ-ON-W at: lock_acquire+0x1be/0x520 _raw_spin_lock+0x2c/0x40 xa_set_mark+0x70/0x110 mlx5e_xfrm_add_state+0xe48/0x2290 [mlx5_core] xfrm_dev_state_add+0x3bb/0xd70 xfrm_add_sa+0x2451/0x4a90 xfrm_user_rcv_msg+0x493/0x880 netlink_rcv_skb+0x12e/0x380 xfrm_netlink_rcv+0x6d/0x90 netlink_unicast+0x42f/0x740 netlink_sendmsg+0x745/0xbe0 __sock_sendmsg+0xc5/0x190 __sys_sendto+0x1fe/0x2c0 __x64_sys_sendto+0xdc/0x1b0 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 INITIAL USE at: lock_acquire+0x1be/0x520 _raw_spin_lock_bh+0x34/0x40 mlx5e_xfrm_add_state+0xc5b/0x2290 [mlx5_core] xfrm_dev_state_add+0x3bb/0xd70 xfrm_add_sa+0x2451/0x4a90 xfrm_user_rcv_msg+0x493/0x880 netlink_rcv_skb+0x12e/0x380 xfrm_netlink_rcv+0x6d/0x90 netlink_unicast+0x42f/0x740 netlink_sendmsg+0x745/0xbe0 __sock_sendmsg+0xc5/0x190 __sys_sendto+0x1fe/0x2c0 __x64_sys_sendto+0xdc/0x1b0 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 } ... key at: [<ffffffffa078ff60>] __key.48+0x0/0xfffffffffff210a0 [mlx5_core] ... acquired at: __lock_acquire+0x30a0/0x5040 lock_acquire+0x1be/0x520 _raw_spin_lock_bh+0x34/0x40 mlx5e_xfrm_del_state+0xca/0x1e0 [mlx5_core] xfrm_dev_state_delete+0x90/0x160 __xfrm_state_delete+0x662/0xae0 xfrm_state_delete+0x1e/0x30 xfrm_del_sa+0x1c2/0x340 xfrm_user_rcv_msg+0x493/0x880 netlink_rcv_skb+0x12e/0x380 xfrm_netlink_rcv+0x6d/0x90 netlink_unicast+0x42f/0x740 netlink_sendmsg+0x745/0xbe0 __sock_sendmsg+0xc5/0x190 __sys_sendto+0x1fe/0x2c0 __x64_sys_sendto+0xdc/0x1b0 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 stack backtrace: CPU: 7 UID: 0 PID: 1337 Comm: charon Not tainted 6.12.0+ #4 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x74/0xd0 check_irq_usage+0x12e8/0x1d90 ? print_shortest_lock_dependencies_backwards+0x1b0/0x1b0 ? check_chain_key+0x1bb/0x4c0 ? __lockdep_reset_lock+0x180/0x180 ? check_path.constprop.0+0x24/0x50 ? mark_lock+0x108/0x2fb0 ? print_circular_bug+0x9b0/0x9b0 ? mark_lock+0x108/0x2fb0 ? print_usage_bug.part.0+0x670/0x670 ? check_prev_add+0x1c4/0x2310 check_prev_add+0x1c4/0x2310 __lock_acquire+0x30a0/0x5040 ? lockdep_set_lock_cmp_fn+0x190/0x190 ? lockdep_set_lock_cmp_fn+0x190/0x190 lock_acquire+0x1be/0x520 ? mlx5e_xfrm_del_state+0xca/0x1e0 [mlx5_core] ? lockdep_hardirqs_on_prepare+0x400/0x400 ? __xfrm_state_delete+0x5f0/0xae0 ? lock_downgrade+0x6b0/0x6b0 _raw_spin_lock_bh+0x34/0x40 ? mlx5e_xfrm_del_state+0xca/0x1e0 [mlx5_core] mlx5e_xfrm_del_state+0xca/0x1e0 [mlx5_core] xfrm_dev_state_delete+0x90/0x160 __xfrm_state_delete+0x662/0xae0 xfrm_state_delete+0x1e/0x30 xfrm_del_sa+0x1c2/0x340 ? xfrm_get_sa+0x250/0x250 ? check_chain_key+0x1bb/0x4c0 xfrm_user_rcv_msg+0x493/0x880 ? copy_sec_ctx+0x270/0x270 ? check_chain_key+0x1bb/0x4c0 ? lockdep_set_lock_cmp_fn+0x190/0x190 ? lockdep_set_lock_cmp_fn+0x190/0x190 netlink_rcv_skb+0x12e/0x380 ? copy_sec_ctx+0x270/0x270 ? netlink_ack+0xd90/0xd90 ? netlink_deliver_tap+0xcd/0xb60 xfrm_netlink_rcv+0x6d/0x90 netlink_unicast+0x42f/0x740 ? netlink_attachskb+0x730/0x730 ? lock_acquire+0x1be/0x520 netlink_sendmsg+0x745/0xbe0 ? netlink_unicast+0x740/0x740 ? __might_fault+0xbb/0x170 ? netlink_unicast+0x740/0x740 __sock_sendmsg+0xc5/0x190 ? fdget+0x163/0x1d0 __sys_sendto+0x1fe/0x2c0 ? __x64_sys_getpeername+0xb0/0xb0 ? do_user_addr_fault+0x856/0xe30 ? lock_acquire+0x1be/0x520 ? __task_pid_nr_ns+0x117/0x410 ? lock_downgrade+0x6b0/0x6b0 __x64_sys_sendto+0xdc/0x1b0 ? lockdep_hardirqs_on_prepare+0x284/0x400 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7f7d31291ba4 Code: 7d e8 89 4d d4 e8 4c 42 f7 ff 44 8b 4d d0 4c 8b 45 c8 89 c3 44 8b 55 d4 8b 7d e8 b8 2c 00 00 00 48 8b 55 d8 48 8b 75 e0 0f 05 <48> 3d 00 f0 ff ff 77 34 89 df 48 89 45 e8 e8 99 42 f7 ff 48 8b 45 RSP: 002b:00007f7d2ccd94f0 EFLAGS: 00000297 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f7d31291ba4 RDX: 0000000000000028 RSI: 00007f7d2ccd96a0 RDI: 000000000000000a RBP: 00007f7d2ccd9530 R08: 00007f7d2ccd9598 R09: 000000000000000c R10: 0000000000000000 R11: 0000000000000297 R12: 0000000000000028 R13: 00007f7d2ccd9598 R14: 00007f7d2ccd96a0 R15: 00000000000000e1 </TASK> Fixes: 4c24272b4e2b ("net/mlx5e: Listen to ARP events to update IPsec L2 headers in tunnel mode") Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-16net/mlx5: Clear port select structure when fail to createMark Zhang
Clear the port select structure on error so no stale values left after definers are destroyed. That's because the mlx5_lag_destroy_definers() always try to destroy all lag definers in the tt_map, so in the flow below lag definers get double-destroyed and cause kernel crash: mlx5_lag_port_sel_create() mlx5_lag_create_definers() mlx5_lag_create_definer() <- Failed on tt 1 mlx5_lag_destroy_definers() <- definers[tt=0] gets destroyed mlx5_lag_port_sel_create() mlx5_lag_create_definers() mlx5_lag_create_definer() <- Failed on tt 0 mlx5_lag_destroy_definers() <- definers[tt=0] gets double-destroyed Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 Mem abort info: ESR = 0x0000000096000005 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x05: level 1 translation fault Data abort info: ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 user pgtable: 64k pages, 48-bit VAs, pgdp=0000000112ce2e00 [0000000000000008] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP Modules linked in: iptable_raw bonding ip_gre ip6_gre gre ip6_tunnel tunnel6 geneve ip6_udp_tunnel udp_tunnel ipip tunnel4 ip_tunnel rdma_ucm(OE) rdma_cm(OE) iw_cm(OE) ib_ipoib(OE) ib_cm(OE) ib_umad(OE) mlx5_ib(OE) ib_uverbs(OE) mlx5_fwctl(OE) fwctl(OE) mlx5_core(OE) mlxdevm(OE) ib_core(OE) mlxfw(OE) memtrack(OE) mlx_compat(OE) openvswitch nsh nf_conncount psample xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xfrm_user xfrm_algo xt_addrtype iptable_filter iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter bridge stp llc netconsole overlay efi_pstore sch_fq_codel zram ip_tables crct10dif_ce qemu_fw_cfg fuse ipv6 crc_ccitt [last unloaded: mlx_compat(OE)] CPU: 3 UID: 0 PID: 217 Comm: kworker/u53:2 Tainted: G OE 6.11.0+ #2 Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 Workqueue: mlx5_lag mlx5_do_bond_work [mlx5_core] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : mlx5_del_flow_rules+0x24/0x2c0 [mlx5_core] lr : mlx5_lag_destroy_definer+0x54/0x100 [mlx5_core] sp : ffff800085fafb00 x29: ffff800085fafb00 x28: ffff0000da0c8000 x27: 0000000000000000 x26: ffff0000da0c8000 x25: ffff0000da0c8000 x24: ffff0000da0c8000 x23: ffff0000c31f81a0 x22: 0400000000000000 x21: ffff0000da0c8000 x20: 0000000000000000 x19: 0000000000000001 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffff8b0c9350 x14: 0000000000000000 x13: ffff800081390d18 x12: ffff800081dc3cc0 x11: 0000000000000001 x10: 0000000000000b10 x9 : ffff80007ab7304c x8 : ffff0000d00711f0 x7 : 0000000000000004 x6 : 0000000000000190 x5 : ffff00027edb3010 x4 : 0000000000000000 x3 : 0000000000000000 x2 : ffff0000d39b8000 x1 : ffff0000d39b8000 x0 : 0400000000000000 Call trace: mlx5_del_flow_rules+0x24/0x2c0 [mlx5_core] mlx5_lag_destroy_definer+0x54/0x100 [mlx5_core] mlx5_lag_destroy_definers+0xa0/0x108 [mlx5_core] mlx5_lag_port_sel_create+0x2d4/0x6f8 [mlx5_core] mlx5_activate_lag+0x60c/0x6f8 [mlx5_core] mlx5_do_bond_work+0x284/0x5c8 [mlx5_core] process_one_work+0x170/0x3e0 worker_thread+0x2d8/0x3e0 kthread+0x11c/0x128 ret_from_fork+0x10/0x20 Code: a9025bf5 aa0003f6 a90363f7 f90023f9 (f9400400) ---[ end trace 0000000000000000 ]--- Fixes: dc48516ec7d3 ("net/mlx5: Lag, add support to create definers for LAG") Signed-off-by: Mark Zhang <markzhang@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-16net/mlx5: SF, Fix add port error handlingChris Mi
If failed to add SF, error handling doesn't delete the SF from the SF table. But the hw resources are deleted. So when unload driver, hw resources will be deleted again. Firmware will report syndrome 0x68def3 which means "SF is not allocated can not deallocate". Fix it by delete SF from SF table if failed to add SF. Fixes: 2597ee190b4e ("net/mlx5: Call mlx5_sf_id_erase() once in mlx5_sf_dealloc()") Signed-off-by: Chris Mi <cmi@nvidia.com> Reviewed-by: Shay Drori <shayd@nvidia.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-16net/mlx5: Fix a lockdep warning as part of the write combining testYishai Hadas
Fix a lockdep warning [1] observed during the write combining test. The warning indicates a potential nested lock scenario that could lead to a deadlock. However, this is a false positive alarm because the SF lock and its parent lock are distinct ones. The lockdep confusion arises because the locks belong to the same object class (i.e., struct mlx5_core_dev). To resolve this, the code has been refactored to avoid taking both locks. Instead, only the parent lock is acquired. [1] raw_ethernet_bw/2118 is trying to acquire lock: [ 213.619032] ffff88811dd75e08 (&dev->wc_state_lock){+.+.}-{3:3}, at: mlx5_wc_support_get+0x18c/0x210 [mlx5_core] [ 213.620270] [ 213.620270] but task is already holding lock: [ 213.620943] ffff88810b585e08 (&dev->wc_state_lock){+.+.}-{3:3}, at: mlx5_wc_support_get+0x10c/0x210 [mlx5_core] [ 213.622045] [ 213.622045] other info that might help us debug this: [ 213.622778] Possible unsafe locking scenario: [ 213.622778] [ 213.623465] CPU0 [ 213.623815] ---- [ 213.624148] lock(&dev->wc_state_lock); [ 213.624615] lock(&dev->wc_state_lock); [ 213.625071] [ 213.625071] *** DEADLOCK *** [ 213.625071] [ 213.625805] May be due to missing lock nesting notation [ 213.625805] [ 213.626522] 4 locks held by raw_ethernet_bw/2118: [ 213.627019] #0: ffff88813f80d578 (&uverbs_dev->disassociate_srcu){.+.+}-{0:0}, at: ib_uverbs_ioctl+0xc4/0x170 [ib_uverbs] [ 213.628088] #1: ffff88810fb23930 (&file->hw_destroy_rwsem){.+.+}-{3:3}, at: ib_init_ucontext+0x2d/0xf0 [ib_uverbs] [ 213.629094] #2: ffff88810fb23878 (&file->ucontext_lock){+.+.}-{3:3}, at: ib_init_ucontext+0x49/0xf0 [ib_uverbs] [ 213.630106] #3: ffff88810b585e08 (&dev->wc_state_lock){+.+.}-{3:3}, at: mlx5_wc_support_get+0x10c/0x210 [mlx5_core] [ 213.631185] [ 213.631185] stack backtrace: [ 213.631718] CPU: 1 UID: 0 PID: 2118 Comm: raw_ethernet_bw Not tainted 6.12.0-rc7_internal_net_next_mlx5_89a0ad0 #1 [ 213.632722] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 213.633785] Call Trace: [ 213.634099] [ 213.634393] dump_stack_lvl+0x7e/0xc0 [ 213.634806] print_deadlock_bug+0x278/0x3c0 [ 213.635265] __lock_acquire+0x15f4/0x2c40 [ 213.635712] lock_acquire+0xcd/0x2d0 [ 213.636120] ? mlx5_wc_support_get+0x18c/0x210 [mlx5_core] [ 213.636722] ? mlx5_ib_enable_lb+0x24/0xa0 [mlx5_ib] [ 213.637277] __mutex_lock+0x81/0xda0 [ 213.637697] ? mlx5_wc_support_get+0x18c/0x210 [mlx5_core] [ 213.638305] ? mlx5_wc_support_get+0x18c/0x210 [mlx5_core] [ 213.638902] ? rcu_read_lock_sched_held+0x3f/0x70 [ 213.639400] ? mlx5_wc_support_get+0x18c/0x210 [mlx5_core] [ 213.640016] mlx5_wc_support_get+0x18c/0x210 [mlx5_core] [ 213.640615] set_ucontext_resp+0x68/0x2b0 [mlx5_ib] [ 213.641144] ? debug_mutex_init+0x33/0x40 [ 213.641586] mlx5_ib_alloc_ucontext+0x18e/0x7b0 [mlx5_ib] [ 213.642145] ib_init_ucontext+0xa0/0xf0 [ib_uverbs] [ 213.642679] ib_uverbs_handler_UVERBS_METHOD_GET_CONTEXT+0x95/0xc0 [ib_uverbs] [ 213.643426] ? _copy_from_user+0x46/0x80 [ 213.643878] ib_uverbs_cmd_verbs+0xa6b/0xc80 [ib_uverbs] [ 213.644426] ? ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0x130/0x130 [ib_uverbs] [ 213.645213] ? __lock_acquire+0xa99/0x2c40 [ 213.645675] ? lock_acquire+0xcd/0x2d0 [ 213.646101] ? ib_uverbs_ioctl+0xc4/0x170 [ib_uverbs] [ 213.646625] ? reacquire_held_locks+0xcf/0x1f0 [ 213.647102] ? do_user_addr_fault+0x45d/0x770 [ 213.647586] ib_uverbs_ioctl+0xe0/0x170 [ib_uverbs] [ 213.648102] ? ib_uverbs_ioctl+0xc4/0x170 [ib_uverbs] [ 213.648632] __x64_sys_ioctl+0x4d3/0xaa0 [ 213.649060] ? do_user_addr_fault+0x4a8/0x770 [ 213.649528] do_syscall_64+0x6d/0x140 [ 213.649947] entry_SYSCALL_64_after_hwframe+0x4b/0x53 [ 213.650478] RIP: 0033:0x7fa179b0737b [ 213.650893] Code: ff ff ff 85 c0 79 9b 49 c7 c4 ff ff ff ff 5b 5d 4c 89 e0 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 7d 2a 0f 00 f7 d8 64 89 01 48 [ 213.652619] RSP: 002b:00007ffd2e6d46e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 213.653390] RAX: ffffffffffffffda RBX: 00007ffd2e6d47f8 RCX: 00007fa179b0737b [ 213.654084] RDX: 00007ffd2e6d47e0 RSI: 00000000c0181b01 RDI: 0000000000000003 [ 213.654767] RBP: 00007ffd2e6d47c0 R08: 00007fa1799be010 R09: 0000000000000002 [ 213.655453] R10: 00007ffd2e6d4960 R11: 0000000000000246 R12: 00007ffd2e6d487c [ 213.656170] R13: 0000000000000027 R14: 0000000000000001 R15: 00007ffd2e6d4f70 Fixes: d98995b4bf98 ("net/mlx5: Reimplement write combining test") Signed-off-by: Yishai Hadas <yishaih@nvidia.com> Reviewed-by: Michael Guralnik <michaelgur@nvidia.com> Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-16net/mlx5: Fix RDMA TX steering prioPatrisious Haddad
User added steering rules at RDMA_TX were being added to the first prio, which is the counters prio. Fix that so that they are correctly added to the BYPASS_PRIO instead. Fixes: 24670b1a3166 ("net/mlx5: Add support for RDMA TX steering") Signed-off-by: Patrisious Haddad <phaddad@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-16drm: xlnx: zynqmp_dpsub: Fix kernel docTomi Valkeinen
Fix two kernel doc warnings introduced by the recent DP audio patch: - Add a doc line for the new "audio" field - Remove a reference to zynqmp_dpsub.c from zynqmp.rst, as the .c file no longer has structured comments Fixes: 3ec5c1579305 ("drm: xlnx: zynqmp_dpsub: Add DP audio support") Closes: https://lore.kernel.org/all/20241220154208.720d990b@canb.auug.org.au/ Reviewed-by: Vishal Sagar <vishal.sagar@amd.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241220-xilinx-dp-audio-doc-fix-v1-1-cc488996e463@ideasonboard.com (cherry picked from commit 96b5d2e807f667320c66f41ddc1c473023a73ab2) Signed-off-by: Maxime Ripard <mripard@kernel.org>
2025-01-16Merge branch 'net-stmmac-rx-performance-improvement'Paolo Abeni
Furong Xu says: ==================== net: stmmac: RX performance improvement This series improves RX performance a lot, ~40% TCP RX throughput boost has been observed with DWXGMAC CORE 3.20a running on Cortex-A65 CPUs: from 2.18 Gbits/sec increased to 3.06 Gbits/sec. ==================== Link: https://patch.msgid.link/cover.1736910454.git.0x1207@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-16net: stmmac: Convert prefetch() to net_prefetch() for received framesFurong Xu
The size of DMA descriptors is 32 bytes at most. net_prefetch() for received frames, and keep prefetch() for descriptors. This patch brings ~4.8% driver performance improvement in a TCP RX throughput test with iPerf tool on a single isolated Cortex-A65 CPU core, 2.92 Gbits/sec increased to 3.06 Gbits/sec. Suggested-by: Joe Damato <jdamato@fastly.com> Signed-off-by: Furong Xu <0x1207@gmail.com> Reviewed-by: Yanteng Si <si.yanteng@linux.dev> Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com> Reviewed-by: Joe Damato <jdamato@fastly.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-16net: stmmac: Optimize cache prefetch in RX pathFurong Xu
Current code prefetches cache lines for the received frame first, and then dma_sync_single_for_cpu() against this frame, this is wrong. Cache prefetch should be triggered after dma_sync_single_for_cpu(). This patch brings ~2.8% driver performance improvement in a TCP RX throughput test with iPerf tool on a single isolated Cortex-A65 CPU core, 2.84 Gbits/sec increased to 2.92 Gbits/sec. Signed-off-by: Furong Xu <0x1207@gmail.com> Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com> Reviewed-by: Yanteng Si <si.yanteng@linux.dev> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-16net: stmmac: Set page_pool_params.max_len to a precise sizeFurong Xu
DMA engine will always write no more than dma_buf_sz bytes of a received frame into a page buffer, the remaining spaces are unused or used by CPU exclusively. Setting page_pool_params.max_len to almost the full size of page(s) helps nothing more, but wastes more CPU cycles on cache maintenance. For a standard MTU of 1500, then dma_buf_sz is assigned to 1536, and this patch brings ~16.9% driver performance improvement in a TCP RX throughput test with iPerf tool on a single isolated Cortex-A65 CPU core, from 2.43 Gbits/sec increased to 2.84 Gbits/sec. Signed-off-by: Furong Xu <0x1207@gmail.com> Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com> Reviewed-by: Yanteng Si <si.yanteng@linux.dev> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-16net: stmmac: Switch to zero-copy in non-XDP RX pathFurong Xu
Avoid memcpy in non-XDP RX path by marking all allocated SKBs to be recycled in the upper network stack. This patch brings ~11.5% driver performance improvement in a TCP RX throughput test with iPerf tool on a single isolated Cortex-A65 CPU core, from 2.18 Gbits/sec increased to 2.43 Gbits/sec. Signed-off-by: Furong Xu <0x1207@gmail.com> Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com> Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com> Reviewed-by: Yanteng Si <si.yanteng@linux.dev> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-16Merge patch series "lockref cleanups"Christian Brauner
Christoph Hellwig <hch@lst.de> says: This series has a bunch of cosmetic cleanups for the lockref code I came up with when reading the code in preparation of adding a new user of it. * patches from https://lore.kernel.org/r/20250115094702.504610-1-hch@lst.de: gfs2: use lockref_init for qd_lockref erofs: use lockref_init for pcl->lockref dcache: use lockref_init for d_lockref lockref: add a lockref_init helper lockref: drop superfluous externs lockref: use bool for false/true returns lockref: improve the lockref_get_not_zero description lockref: remove lockref_put_not_zero Link: https://lore.kernel.org/r/20250115094702.504610-1-hch@lst.de Signed-off-by: Christian Brauner <brauner@kernel.org>
2025-01-16gfs2: use lockref_init for qd_lockrefChristoph Hellwig
Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20250115094702.504610-9-hch@lst.de Signed-off-by: Christian Brauner <brauner@kernel.org>
2025-01-16erofs: use lockref_init for pcl->lockrefChristoph Hellwig
Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20250115094702.504610-8-hch@lst.de Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com> Signed-off-by: Christian Brauner <brauner@kernel.org>
2025-01-16dcache: use lockref_init for d_lockrefChristoph Hellwig
Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20250115094702.504610-7-hch@lst.de Signed-off-by: Christian Brauner <brauner@kernel.org>
2025-01-16lockref: add a lockref_init helperChristoph Hellwig
Add a helper to initialize the lockdep, that is initialize the spinlock and set a value. Having to open code them isn't a big deal, but having an initializer feels right for a proper primitive. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20250115094702.504610-6-hch@lst.de Signed-off-by: Christian Brauner <brauner@kernel.org>
2025-01-16lockref: drop superfluous externsChristoph Hellwig
Drop the superfluous externs from the remaining prototypes in lockref.h. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20250115094702.504610-5-hch@lst.de Signed-off-by: Christian Brauner <brauner@kernel.org>
2025-01-16lockref: use bool for false/true returnsChristoph Hellwig
Replace int used as bool with the actual bool type for return values that can only be true or false. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20250115094702.504610-4-hch@lst.de Signed-off-by: Christian Brauner <brauner@kernel.org>
2025-01-16lockref: improve the lockref_get_not_zero descriptionChristoph Hellwig
lockref_put_return returns exactly -1 and not "an error" when the lockref is dead or locked. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20250115094702.504610-3-hch@lst.de Signed-off-by: Christian Brauner <brauner@kernel.org>
2025-01-16lockref: remove lockref_put_not_zeroChristoph Hellwig
lockref_put_not_zero is not used anywhere, and unless I'm missing something didn't end up being used used at all. Remove it. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20250115094702.504610-2-hch@lst.de Signed-off-by: Christian Brauner <brauner@kernel.org>
2025-01-16fs: Fix return type of do_mount() from long to intSentaro Onizuka
Fix the return type of do_mount() function from long to int to match its ac tual behavior. The function only returns int values, and all callers, inclu ding those in fs/namespace.c and arch/alpha/kernel/osf_sys.c, already treat the return value as int. This change improves type consistency across the filesystem code and aligns the function signature with its existing impleme ntation and usage. Signed-off-by: Sentaro Onizuka <sentaro@amazon.com> Link: https://lore.kernel.org/r/20250113151400.55512-1-sentaro@amazon.com Signed-off-by: Christian Brauner <brauner@kernel.org>
2025-01-16KVM: arm64: nv: Fix doc header layout for timersMarc Zyngier
Stephen reports that 'make htmldocs' spits out a warning ("Documentation/virt/kvm/devices/vcpu.rst:147: WARNING: Definition list ends without a blank line; unexpected unindent."). Fix it by keeping all the timer attributes on a single line. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Marc Zyngier <maz@kernel.org>
2025-01-16HID: hid-asus: Disable OOBE mode on the ProArt P16Luke D. Jones
The new ASUS ProArt 16" laptop series come with their keyboards stuck in an Out-Of-Box-Experience mode. While in this mode most functions will not work such as LED control or Fn key combos. The correct init sequence is now done to disable this OOBE. This patch addresses only the ProArt series so far and it is unknown if there may be others, in which case a new quirk may be required. Signed-off-by: Luke D. Jones <luke@ljones.dev> Co-developed-by: Connor Belli <connorbelli2003@gmail.com> Signed-off-by: Connor Belli <connorbelli2003@gmail.com> Tested-by: Jan Schmidt <jan@centricular.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-01-16rust: device: Use as_char_ptr() to avoid explicit castViresh Kumar
Use as_char_ptr() to avoid explicit cast. Suggested-by: Alice Ryhl <aliceryhl@google.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Link: https://lore.kernel.org/r/a88cd29bf01c8fbafd5c2608357f54ea10f6e492.1737016320.git.viresh.kumar@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-16rust: device: Replace CString with CStr in property_present()Viresh Kumar
The property_present() method expects a &CString currently and will work only with heap allocated C strings. In order to make it work with compile-time string constants too, change the argument type to &CStr. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Link: https://lore.kernel.org/r/e97dcbe0418cc1053fb4bcfac65cc02a0afcdf78.1737005078.git.viresh.kumar@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-16HID: steelseries: remove unnecessary returnChristian Mayer
Remove unnecessary return in a void function. Signed-off-by: Christian Mayer <git@mayer-bgk.de> Reviewed-by: Bastien Nocera <hadess@hadess.net> Tested-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-01-16HID: steelseries: export model and manufacturerChristian Mayer
Export model and manufacturer with the power supply properties. This helps identifing the device in the battery overview. In the case of the Arctis 9 headset, the manufacturer is prefixed twice in the device name. Signed-off-by: Christian Mayer <git@mayer-bgk.de> Reviewed-by: Bastien Nocera <hadess@hadess.net> Tested-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-01-16HID: steelseries: export charging state for the SteelSeries Arctis 9 headsetChristian Mayer
The Arctis 9 headset provides the information if the power cable is plugged in and charging via the battery report. This information can be exported. Signed-off-by: Christian Mayer <git@mayer-bgk.de> Reviewed-by: Bastien Nocera <hadess@hadess.net> Tested-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-01-16HID: steelseries: add SteelSeries Arctis 9 supportChristian Mayer
Add support for the SteelSeries Arctis 9 headset. This driver will export the battery information like it already does for the Arcits 1 headset. Signed-off-by: Christian Mayer <git@mayer-bgk.de> Reviewed-by: Bastien Nocera <hadess@hadess.net> Tested-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-01-16HID: steelseries: preparation for adding SteelSeries Arctis 9 supportChristian Mayer
Refactor code and add calls to hid_hw_open/hid_hw_closed in preparation for adding support for the SteelSeries Arctis 9 headset. Signed-off-by: Christian Mayer <git@mayer-bgk.de> Reviewed-by: Bastien Nocera <hadess@hadess.net> Tested-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-01-16xfs: fix buffer lookup vs release raceChristoph Hellwig
Since commit 298f34224506 ("xfs: lockless buffer lookup") the buffer lookup fastpath is done without a hash-wide lock (then pag_buf_lock, now bc_lock) and only under RCU protection. But this means that nothing serializes lookups against the temporary 0 reference count for buffers that are added to the LRU after dropping the last regular reference, and a concurrent lookup would fail to find them. Fix this by doing all b_hold modifications under b_lock. We're already doing this for release so this "only" ~ doubles the b_lock round trips. We'll later look into the lockref infrastructure to optimize the number of lock round trips again. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Carlos Maiolino <cem@kernel.org>
2025-01-16xfs: check for dead buffers in xfs_buf_find_insertChristoph Hellwig
Commit 32dd4f9c506b ("xfs: remove a superflous hash lookup when inserting new buffers") converted xfs_buf_find_insert to use rhashtable_lookup_get_insert_fast and thus an operation that returns the existing buffer when an insert would duplicate the hash key. But this code path misses the check for a buffer with a reference count of zero, which could lead to reusing an about to be freed buffer. Fix this by using the same atomic_inc_not_zero pattern as xfs_buf_insert. Fixes: 32dd4f9c506b ("xfs: remove a superflous hash lookup when inserting new buffers") Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Cc: stable@vger.kernel.org # v6.0 Signed-off-by: Carlos Maiolino <cem@kernel.org>
2025-01-16dt-bindings: pinctrl: sunxi: add compatible for V853Andras Szemzo
Add compatible strings for V853 family pinctrl. Signed-off-by: Andras Szemzo <szemzo.andras@gmail.com> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Link: https://lore.kernel.org/20250110123923.270626-3-szemzo.andras@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-01-16genirq/generic_chip: Export irq_gc_mask_disable_and_ack_set()Dr. David Alan Gilbert
The recent conversion of brcmstb_l2_mask_and_ack() to irq_gc_mask_disable_and_ack_set() missed that the driver can be built as a module, but the generic function is not exported. Add the missing export. [ tglx: Converted it to a fix ] Fixes: dd1f17a9faf5 ("irqchip/irq-brcmstb-l2: Replace brcmstb_l2_mask_and_ack() by generic function") Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/20250116005920.626822-1-linux@treblig.org
2025-01-16timers: Optimize get_timer_[this_]cpu_base()Zhongqiu Han
If a timer is deferrable and NO_HZ_COMMON is enabled, get_timer_cpu_base() and get_timer_this_cpu_base() invoke per_cpu_ptr() and this_cpu_ptr() twice. While this seems to be cheap, get_timer_cpu_base() can be called in a loop in lock_timer_base(). Optimize the functions by updating the base index for deferrable timers and retrieving the actual base pointer once. In both cases the resulting assembly code of those helpers becomes smaller, which results in a ~30% execution time reduction for a lock_timer_base() micro bench mark. Signed-off-by: Zhongqiu Han <quic_zhonhan@quicinc.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lore.kernel.org/all/20241231150115.1978342-1-quic_zhonhan@quicinc.com
2025-01-16Merge tag 'amd-drm-fixes-6.13-2025-01-15' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-6.13-2025-01-15: amdgpu: - SMU 13 fix - DP MST fixes - DCN 3.5 fix - PSR fixes - eDP fix - VRR fix - Enforce isolation fixes - GFX 12 fix - PSP 14.x fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250115151602.210704-1-alexander.deucher@amd.com
2025-01-15ksmbd: fix integer overflows on 32 bit systemsDan Carpenter
On 32bit systems the addition operations in ipc_msg_alloc() can potentially overflow leading to memory corruption. Add bounds checking using KSMBD_IPC_MAX_PAYLOAD to avoid overflow. Fixes: 0626e6641f6b ("cifsd: add server handler for central processing and tranport layers") Cc: stable@vger.kernel.org Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2025-01-15ksmbd: browse interfaces list on FSCTL_QUERY_INTERFACE_INFO IOCTLNamjae Jeon
ksmbd.mount will give each interfaces list and bind_interfaces_only flags to ksmbd server. Previously, the interfaces list was sent only when bind_interfaces_only was enabled. ksmbd server browse only interfaces list given from ksmbd.conf on FSCTL_QUERY_INTERFACE_INFO IOCTL. Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2025-01-15ksmbd: Remove unused functionsDr. David Alan Gilbert
ksmbd_rpc_rap() was added in 2021 as part of commit 0626e6641f6b ("cifsd: add server handler for central processing and tranport layers") ksmbd_vfs_posix_lock_wait_timeout() was added in 2021 as part of commit f44158485826 ("cifsd: add file operations") both have remained unused. Remove them. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2025-01-15ocfs2: check dir i_size in ocfs2_find_entrySu Yue
syz reports an out of bounds read: ================================================================== BUG: KASAN: slab-out-of-bounds in ocfs2_match fs/ocfs2/dir.c:334 [inline] BUG: KASAN: slab-out-of-bounds in ocfs2_search_dirblock+0x283/0x6e0 fs/ocfs2/dir.c:367 Read of size 1 at addr ffff88804d8b9982 by task syz-executor.2/14802 CPU: 0 UID: 0 PID: 14802 Comm: syz-executor.2 Not tainted 6.13.0-rc4 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Sched_ext: serialise (enabled+all), task: runnable_at=-10ms Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x229/0x350 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0x164/0x530 mm/kasan/report.c:489 kasan_report+0x147/0x180 mm/kasan/report.c:602 ocfs2_match fs/ocfs2/dir.c:334 [inline] ocfs2_search_dirblock+0x283/0x6e0 fs/ocfs2/dir.c:367 ocfs2_find_entry_id fs/ocfs2/dir.c:414 [inline] ocfs2_find_entry+0x1143/0x2db0 fs/ocfs2/dir.c:1078 ocfs2_find_files_on_disk+0x18e/0x530 fs/ocfs2/dir.c:1981 ocfs2_lookup_ino_from_name+0xb6/0x110 fs/ocfs2/dir.c:2003 ocfs2_lookup+0x30a/0xd40 fs/ocfs2/namei.c:122 lookup_open fs/namei.c:3627 [inline] open_last_lookups fs/namei.c:3748 [inline] path_openat+0x145a/0x3870 fs/namei.c:3984 do_filp_open+0xe9/0x1c0 fs/namei.c:4014 do_sys_openat2+0x135/0x1d0 fs/open.c:1402 do_sys_open fs/open.c:1417 [inline] __do_sys_openat fs/open.c:1433 [inline] __se_sys_openat fs/open.c:1428 [inline] __x64_sys_openat+0x15d/0x1c0 fs/open.c:1428 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf6/0x210 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f01076903ad Code: c3 e8 a7 2b 00 00 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f01084acfc8 EFLAGS: 00000246 ORIG_RAX: 0000000000000101 RAX: ffffffffffffffda RBX: 00007f01077cbf80 RCX: 00007f01076903ad RDX: 0000000000105042 RSI: 0000000020000080 RDI: ffffffffffffff9c RBP: 00007f01077cbf80 R08: 0000000000000000 R09: 0000000000000000 R10: 00000000000001ff R11: 0000000000000246 R12: 0000000000000000 R13: 00007f01077cbf80 R14: 00007f010764fc90 R15: 00007f010848d000 </TASK> ================================================================== And a general protection fault in ocfs2_prepare_dir_for_insert: ================================================================== loop0: detected capacity change from 0 to 32768 JBD2: Ignoring recovery information on journal ocfs2: Mounting device (7,0) on (node local, slot 0) with ordered data mode. Oops: general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 0 UID: 0 PID: 5096 Comm: syz-executor792 Not tainted 6.11.0-rc4-syzkaller-00002-gb0da640826ba #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:ocfs2_find_dir_space_id fs/ocfs2/dir.c:3406 [inline] RIP: 0010:ocfs2_prepare_dir_for_insert+0x3309/0x5c70 fs/ocfs2/dir.c:4280 Code: 00 00 e8 2a 25 13 fe e9 ba 06 00 00 e8 20 25 13 fe e9 4f 01 00 00 e8 16 25 13 fe 49 8d 7f 08 49 8d 5f 09 48 89 f8 48 c1 e8 03 <42> 0f b6 04 20 84 c0 0f 85 bd 23 00 00 48 89 d8 48 c1 e8 03 42 0f RSP: 0018:ffffc9000af9f020 EFLAGS: 00010202 RAX: 0000000000000001 RBX: 0000000000000009 RCX: ffff88801e27a440 RDX: 0000000000000000 RSI: 0000000000000400 RDI: 0000000000000008 RBP: ffffc9000af9f830 R08: ffffffff8380395b R09: ffffffff838090a7 R10: 0000000000000002 R11: ffff88801e27a440 R12: dffffc0000000000 R13: ffff88803c660878 R14: f700000000000088 R15: 0000000000000000 FS: 000055555a677380(0000) GS:ffff888020800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000560bce569178 CR3: 000000001de5a000 CR4: 0000000000350ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ocfs2_mknod+0xcaf/0x2b40 fs/ocfs2/namei.c:292 vfs_mknod+0x36d/0x3b0 fs/namei.c:4088 do_mknodat+0x3ec/0x5b0 __do_sys_mknodat fs/namei.c:4166 [inline] __se_sys_mknodat fs/namei.c:4163 [inline] __x64_sys_mknodat+0xa7/0xc0 fs/namei.c:4163 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f2dafda3a99 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 f1 17 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffe336a6658 EFLAGS: 00000246 ORIG_RAX: 0000000000000103 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f2dafda3a99 RDX: 00000000000021c0 RSI: 0000000020000040 RDI: 00000000ffffff9c RBP: 00007f2dafe1b5f0 R08: 0000000000004480 R09: 000055555a6784c0 R10: 0000000000000103 R11: 0000000000000246 R12: 00007ffe336a6680 R13: 00007ffe336a68a8 R14: 431bde82d7b634db R15: 00007f2dafdec03b </TASK> ================================================================== The two reports are all caused invalid negative i_size of dir inode. For ocfs2, dir_inode can't be negative or zero. Here add a check in which is called by ocfs2_check_dir_for_entry(). It fixes the second report as ocfs2_check_dir_for_entry() must be called before ocfs2_prepare_dir_for_insert(). Also set a up limit for dir with OCFS2_INLINE_DATA_FL. The i_size can't be great than blocksize. Link: https://lkml.kernel.org/r/20250106140640.92260-1-glass.su@suse.com Reported-by: Jiacheng Xu <stitch@zju.edu.cn> Link: https://lore.kernel.org/ocfs2-devel/17a04f01.1ae74.19436d003fc.Coremail.stitch@zju.edu.cn/T/#u Reported-by: syzbot+5a64828fcc4c2ad9b04f@syzkaller.appspotmail.com Link: https://lore.kernel.org/all/0000000000005894f3062018caf1@google.com/T/ Signed-off-by: Su Yue <glass.su@suse.com> Reviewed-by: Heming Zhao <heming.zhao@suse.com> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Jun Piao <piaojun@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-01-15mailmap: update entry for Ethan Carter EdwardsEthan Carter Edwards
Map old gmail + name to my current full name and email. Link: https://lkml.kernel.org/r/xbfkmvmp4wyxrvlan57bjnul5icrwfyt67vnhhw2cyr5rzbnee@mfvihhd6s7l5 Signed-off-by: Ethan Carter Edwards <ethan@ethancedwards.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-01-15mm: zswap: move allocations during CPU init outside the lockYosry Ahmed
In zswap_cpu_comp_prepare(), allocations are made and assigned to various members of acomp_ctx under acomp_ctx->mutex. However, allocations may recurse into zswap through reclaim, trying to acquire the same mutex and deadlocking. Move the allocations before the mutex critical section. Only the initialization of acomp_ctx needs to be done with the mutex held. Link: https://lkml.kernel.org/r/20250113214458.2123410-1-yosryahmed@google.com Fixes: 12dcb0ef5406 ("mm: zswap: properly synchronize freeing resources during CPU hotunplug") Signed-off-by: Yosry Ahmed <yosryahmed@google.com> Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Nhat Pham <nphamcs@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-01-15mm: khugepaged: fix call hpage_collapse_scan_file() for anonymous vmaLiu Shixin
syzkaller reported such a BUG_ON(): ------------[ cut here ]------------ kernel BUG at mm/khugepaged.c:1835! Internal error: Oops - BUG: 00000000f2000800 [#1] SMP ... CPU: 6 UID: 0 PID: 8009 Comm: syz.15.106 Kdump: loaded Tainted: G W 6.13.0-rc6 #22 Tainted: [W]=WARN Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 pstate: 00400005 (nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : collapse_file+0xa44/0x1400 lr : collapse_file+0x88/0x1400 sp : ffff80008afe3a60 ... Call trace: collapse_file+0xa44/0x1400 (P) hpage_collapse_scan_file+0x278/0x400 madvise_collapse+0x1bc/0x678 madvise_vma_behavior+0x32c/0x448 madvise_walk_vmas.constprop.0+0xbc/0x140 do_madvise.part.0+0xdc/0x2c8 __arm64_sys_madvise+0x68/0x88 invoke_syscall+0x50/0x120 el0_svc_common.constprop.0+0xc8/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x34/0x128 el0t_64_sync_handler+0xc8/0xd0 el0t_64_sync+0x190/0x198 This indicates that the pgoff is unaligned. After analysis, I confirm the vma is mapped to /dev/zero. Such a vma certainly has vm_file, but it is set to anonymous by mmap_zero(). So even if it's mmapped by 2m-unaligned, it can pass the check in thp_vma_allowable_order() as it is an anonymous-mmap, but then be collapsed as a file-mmap. It seems the problem has existed for a long time, but actually, since we have khugepaged_max_ptes_none check before, we will skip collapse it as it is /dev/zero and so has no present page. But commit d8ea7cc8547c limit the check for only khugepaged, so the BUG_ON() can be triggered by madvise_collapse(). Add vma_is_anonymous() check to make such vma be processed by hpage_collapse_scan_pmd(). Link: https://lkml.kernel.org/r/20250111034511.2223353-1-liushixin2@huawei.com Fixes: d8ea7cc8547c ("mm/khugepaged: add flag to predicate khugepaged-only behavior") Signed-off-by: Liu Shixin <liushixin2@huawei.com> Reviewed-by: Yang Shi <yang@os.amperecomputing.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Chengming Zhou <chengming.zhou@linux.dev> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Mattew Wilcox <willy@infradead.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Nanyong Sun <sunnanyong@huawei.com> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-01-15mm: shmem: use signed int for version handling in casefold optionKaran Sanghavi
Fixes an issue where the use of an unsigned data type in `shmem_parse_opt_casefold()` caused incorrect evaluation of negative conditions. Link: https://lkml.kernel.org/r/20250111-unsignedcompare1601569-v3-1-c861b4221831@gmail.com Fixes: 58e55efd6c72 ("tmpfs: Add casefold lookup support") Reviewed-by: André Almeida <andrealmeid@igalia.com> Reviewed-by: Gabriel Krisman Bertazi <gabriel@krisman.be> Signed-off-by: Karan Sanghavi <karansanghvi98@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Hugh Dickens <hughd@google.com> Cc: Shuah khan <skhan@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-01-15alloc_tag: skip pgalloc_tag_swap if profiling is disabledSuren Baghdasaryan
When memory allocation profiling is disabled, there is no need to swap allocation tags during migration. Skip it to avoid unnecessary overhead. Once I added these checks, the overhead of the mode when memory profiling is enabled but turned off went down by about 50%. Link: https://lkml.kernel.org/r/20241226211639.1357704-2-surenb@google.com Fixes: e0a955bf7f61 ("mm/codetag: add pgalloc_tag_copy()") Signed-off-by: Suren Baghdasaryan <surenb@google.com> Cc: David Wang <00107082@163.com> Cc: Kent Overstreet <kent.overstreet@linux.dev> Cc: Yu Zhao <yuzhao@google.com> Cc: Zhenhua Huang <quic_zhenhuah@quicinc.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-01-15mm: page_alloc: fix missed updates of lowmem_reserve in ↵zihan zhou
adjust_managed_page_count In the kernel, the zone's lowmem_reserve and _watermark, and the global variable 'totalreserve_pages' depend on the value of managed_pages, but after running adjust_managed_page_count, these values aren't updated, which causes some problems. For example, in a system with six 1GB large pages, we found that the value of protection in zoneinfo (zone->lowmem_reserve), is not right. Its value seems to be calculated from the initial managed_pages, but after the managed_pages changed, was not updated. Only after reading the file /proc/sys/vm/lowmem_reserve_ratio, updates happen. read file /proc/sys/vm/lowmem_reserve_ratio: lowmem_reserve_ratio_sysctl_handler ----setup_per_zone_lowmem_reserve --------calculate_totalreserve_pages protection changed after reading file: [root@test ~]# cat /proc/zoneinfo | grep protection protection: (0, 2719, 57360, 0) protection: (0, 0, 54640, 0) protection: (0, 0, 0, 0) protection: (0, 0, 0, 0) [root@test ~]# cat /proc/sys/vm/lowmem_reserve_ratio 256 256 32 0 [root@test ~]# cat /proc/zoneinfo | grep protection protection: (0, 2735, 63524, 0) protection: (0, 0, 60788, 0) protection: (0, 0, 0, 0) protection: (0, 0, 0, 0) lowmem_reserve increased also makes the totalreserve_pages increased, which causes a decrease in available memory. The one above is just a test machine, and the increase is not significant. On our online machine, the reserved memory will increase by several GB due to reading this file. It is clearly unreasonable to cause a sharp drop in available memory just by reading a file. In this patch, we update reserve memory when update managed_pages, The size of reserved memory becomes stable. But it seems that the _watermark should also be updated along with the managed_pages. We have not done it because we are unsure if it is reasonable to set the watermark through the initial managed_pages. If it is not reasonable, we will propose new patch. Link: https://lkml.kernel.org/r/20241225021034.45693-1-15645113830zzh@gmail.com Signed-off-by: zihan zhou <15645113830zzh@gmail.com> Signed-off-by: yaowenchao <yaowenchao@jd.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-01-15Merge branch 'net-mlx5e-ct-add-support-for-hardware-steering'Jakub Kicinski
Tariq Toukan says: ==================== net/mlx5e: CT: Add support for hardware steering This series start with one more HWS patch by Yevgeny, followed by patches that add support for connection tracking in hardware steering mode. It consists of: - patch #2 hooks up the CT ops for the new mode in the right places. - patch #3 moves a function into a common file, so it can be reused. - patch #4 uses the HWS API to implement connection tracking. The main advantage of hardware steering compared to software steering is vastly improved performance when adding/removing/updating rules. Using the T-Rex traffic generator to initiate multi-million UDP flows per second, a kernel running with these patches was able to offload ~600K unique UDP flows per second, a number around ~7x larger than software steering was able to achieve on the same hardware (256-thread AMD EPYC, 512 GB RAM, ConnectX 7 b2b). ==================== Link: https://patch.msgid.link/20250114130646.1937192-1-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-15net/mlx5e: CT: Offload connections with hardware steering rulesCosmin Ratiu
This is modeled similar to how software steering works: - a reference-counted matcher is maintained for each combination of nat/no_nat x ipv4/ipv6 x tcp/udp/gre. - adding a rule involves finding+referencing or creating a corresponding matcher, then actually adding a rule. - updating rules is implemented using the bwc_rule update API, which can change a rule's actions without touching the match value. By using a T-Rex traffic generator to initiate multi-million UDP flows per second, a kernel running with these patches on the RX side was able to offload ~600K flows per second, which is about ~7x larger than what software steering could do on the same hardware (256-thread AMD EPYC, 512 GB RAM, ConnectX-7 b2b). Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com> Reviewed-by: Jianbo Liu <jianbol@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/20250114130646.1937192-5-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-15net/mlx5e: CT: Make mlx5_ct_fs_smfs_ct_validate_flow_rule reusableCosmin Ratiu
This function checks whether a flow_rule has the right flow dissector keys and masks used for a connection tracking flow offload. It is currently used locally by the tc_ct smfs module, but is about to be used from another place, so this commit moves it to a better place, renames it to mlx5e_tc_ct_is_valid_flow_rule and drops the unused fs argument. Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com> Reviewed-by: Jianbo Liu <jianbol@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/20250114130646.1937192-4-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-15 13:36:50 +0000