summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-01-24Merge tag 'v6.14-p1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Remove physical address skcipher walking - Fix boot-up self-test race Algorithms: - Optimisations for x86/aes-gcm - Optimisations for x86/aes-xts - Remove VMAC - Remove keywrap Drivers: - Remove n2 Others: - Fixes for padata UAF - Fix potential rhashtable deadlock by moving schedule_work outside lock" * tag 'v6.14-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (75 commits) rhashtable: Fix rhashtable_try_insert test dt-bindings: crypto: qcom,inline-crypto-engine: Document the SM8750 ICE dt-bindings: crypto: qcom,prng: Document SM8750 RNG dt-bindings: crypto: qcom-qce: Document the SM8750 crypto engine crypto: asymmetric_keys - Remove unused key_being_used_for[] padata: avoid UAF for reorder_work padata: fix UAF in padata_reorder padata: add pd get/put refcnt helper crypto: skcipher - call cond_resched() directly crypto: skcipher - optimize initializing skcipher_walk fields crypto: skcipher - clean up initialization of skcipher_walk::flags crypto: skcipher - fold skcipher_walk_skcipher() into skcipher_walk_virt() crypto: skcipher - remove redundant check for SKCIPHER_WALK_SLOW crypto: skcipher - remove redundant clamping to page size crypto: skcipher - remove unnecessary page alignment of bounce buffer crypto: skcipher - document skcipher_walk_done() and rename some vars crypto: omap - switch from scatter_walk to plain offset crypto: powerpc/p10-aes-gcm - simplify handling of linear associated data crypto: bcm - Drop unused setting of local 'ptr' variable crypto: hisilicon/qm - support new function communication ...
2025-01-24Merge tag 'tpmdd-next-6.14-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd Pull TPM update from Jarkko Sakkinen. * tag 'tpmdd-next-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd: tpm: Change to kvalloc() in eventlog/acpi.c
2025-01-24Merge tag 'pmdomain-v6.14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm Pull pmdomain updates from Ulf Hansson: "pmdomain core: - Add support for naming idlestates through DT pmdomain providers: - arm: Explicitly request the current state at init for the SCMI PM domain - mediatek: Add Airoha CPU PM Domain support for CPU frequency scaling - ti: Add per-device latency constraint management to the ti_sci PM domain cpuidle-psci: - Enable system-wakeup through GENPD_FLAG_ACTIVE_WAKEUP" * tag 'pmdomain-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: pmdomain: airoha: Fix compilation error with Clang-20 and Thumb2 mode pmdomain: arm: scmi_pm_domain: Send an explicit request to set the current state pmdomain: airoha: Add Airoha CPU PM Domain support pmdomain: ti_sci: handle wake IRQs for IO daisy chain wakeups pmdomain: ti_sci: add wakeup constraint management pmdomain: ti_sci: add per-device latency constraint management pmdomain: imx-gpcv2: Suppress bind attrs pmdomain: imx8m[p]-blk-ctrl: Suppress bind attrs pmdomain: core: Support naming idle states dt-bindings: power: domain-idle-state: Allow idle-state-name cpuidle: psci: Activate GENPD_FLAG_ACTIVE_WAKEUP with OSI
2025-01-24Merge tag 'pinctrl-v6.14-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "No core changes this time New drivers: - New subdriver for the Qualcomm MSM8917 SoC TLMM - New subdriver for the Mediatek MT7988 SoC - New subdriver for the Rockchip RK3562 SoC - New subdriver for the Renesas RZ/G3E SoC Improvements: - Fix some missing pins in the Qualcomm IPQ5424 TLMM - Fix some missing LVDS pins in the Sunxi A100/A133 - Support Sunxi V853 (simple compatible string) - Cleanups in the Samsung driver - Fix some AMD suspend behaviour - Cleanups" * tag 'pinctrl-v6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (29 commits) dt-bindings: pinctrl: sunxi: add compatible for V853 pinctrl: Use str_enable_disable-like helpers dt-bindings: pinctrl: Correct indentation and style in DTS example pinctrl: amd: Take suspend type into consideration which pins are non-wake pinctrl: stm32: Add check for clk_enable() pinctrl: renesas: rzg2l: Fix PFC_MASK for RZ/V2H and RZ/G3E pinctrl: sunxi: add missed lvds pins for a100/a133 pinctrl: mediatek: Drop mtk_pinconf_bias_set_pd() pinctrl: renesas: rzg2l: Add support for RZ/G3E SoC pinctrl: renesas: rzg2l: Update r9a09g057_variable_pin_cfg table dt-bindings: pinctrl: renesas: Document RZ/G3E SoC dt-bindings: pinctrl: renesas: Add alpha-numerical port support for RZ/V2H pinctrl: rockchip: add rk3562 support dt-bindings: pinctrl: Add rk3562 pinctrl support pinctrl: Fix the clean up on pinconf_apply_setting failure dt-bindings: pinctrl: add binding for MT7988 SoC pinctrl: mediatek: add MT7988 pinctrl driver pinctrl: mediatek: add support for MTK_PULL_PD_TYPE pinctrl: ocelot: Constify some structures pinctrl: renesas: rzg2l: Add audio clock pins on RZ/G3S ...
2025-01-24Merge tag 'iommu-updates-v6.14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux Pull iommu updates from Joerg Roedel: "Core changes: - PASID support for the blocked_domain ARM-SMMU Updates: - SMMUv2: - Implement per-client prefetcher configuration on Qualcomm SoCs - Support for the Adreno SMMU on Qualcomm's SDM670 SOC - SMMUv3: - Pretty-printing of event records - Drop the ->domain_alloc_paging implementation in favour of domain_alloc_paging_flags(flags==0) - IO-PGTable: - Generalisation of the page-table walker to enable external walkers (e.g. for debugging unexpected page-faults from the GPU) - Minor fix for handling concatenated PGDs at stage-2 with 16KiB pages - Misc: - Clean-up device probing and replace the crufty probe-deferral hack with a more robust implementation of arm_smmu_get_by_fwnode() - Device-tree binding updates for a bunch of Qualcomm platforms Intel VT-d Updates: - Remove domain_alloc_paging() - Remove capability audit code - Draining PRQ in sva unbind path when FPD bit set - Link cache tags of same iommu unit together AMD-Vi Updates: - Use CMPXCHG128 to update DTE - Cleanups of the domain_alloc_paging() path RiscV IOMMU: - Platform MSI support - Shutdown support Rockchip IOMMU: - Add DT bindings for Rockchip RK3576 More smaller fixes and cleanups" * tag 'iommu-updates-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: (66 commits) iommu: Use str_enable_disable-like helpers iommu/amd: Fully decode all combinations of alloc_paging_flags iommu/amd: Move the nid to pdom_setup_pgtable() iommu/amd: Change amd_iommu_pgtable to use enum protection_domain_mode iommu/amd: Remove type argument from do_iommu_domain_alloc() and related iommu/amd: Remove dev == NULL checks iommu/amd: Remove domain_alloc() iommu/amd: Remove unused amd_iommu_domain_update() iommu/riscv: Fixup compile warning iommu/arm-smmu-v3: Add missing #include of linux/string_choices.h iommu/arm-smmu-v3: Use str_read_write helper w/ logs iommu/io-pgtable-arm: Add way to debug pgtable walk iommu/io-pgtable-arm: Re-use the pgtable walk for iova_to_phys iommu/io-pgtable-arm: Make pgtable walker more generic iommu/arm-smmu: Add ACTLR data and support for qcom_smmu_500 iommu/arm-smmu: Introduce ACTLR custom prefetcher settings iommu/arm-smmu: Add support for PRR bit setup iommu/arm-smmu: Refactor qcom_smmu structure to include single pointer iommu/arm-smmu: Re-enable context caching in smmu reset operation iommu/vt-d: Link cache tags of same iommu unit together ...
2025-01-24Merge tag 'platform-drivers-x86-v6.14-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver updates from Ilpo Järvinen: "acer-wmi: - Add support for PH14-51, PH16-72, and Nitro AN515-58 - Add proper hwmon support - Improve error handling when reading "gaming system info" - Replace direct EC reads for the current platform profile with WMI calls to handle EC address variations - Replace custom platform_profile cycling with the generic one ACPI: - platform_profile: Major refactoring and improvements - Support registering multiple platform_profile handlers concurrently to avoid the need to quirk which handler takes precedence - Support reporting "custom" profile for cases where the current profile is ambiguous or when settings tweaks are done outside the pre-defined profile - Abstract and layer platform_profile API better using the class_dev and drvdata - Various minor improvements - Add Documentation and kerneldoc amd/hsmp: - Add support for HSMP protocol v7 amd/pmc: - Support AMD 1Ah family 70h - Support STB with Ryzen desktop SoCs amd/pmf: - Support Custom BIOS inputs for PMF TA - Support passing SRA sensor data from AMD SFH (HID) to PMF TA dell-smo8800: - Move SMO88xx quirk away from the generic i2c-i801 driver - Add accelerometer support for Dell Latitude E6330/E6430 and XPS 9550 - Support probing accelerometer for models yet to be listed in the DMI mapping table because ACPI lacks i2c-address for the accelerometer (behind a module parameter because probing might be dangerous) HID: - amd_sfh: Add support for exporting SRA sensor data hp-wmi: - Add fan and thermal support for Victus 16-s1000 input: - Add key for phone linking - i8042: Add context for the i8042 filter to enable cleaning up the filter related global variables from pdx86 drivers lenovo-wmi-camera: - Use SW_CAMERA_LENS_COVER instead of KEY_CAMERA_ACCESS mellanox mlxbf-pmc: - Add support for monitoring cycle count - Add Documentation thinkpad_acpi: - Add support for phone link key tools/power/x86/intel-speed-select: - Fix Turbo Ratio Limit restore x86-android-tables: - Add support for Vexia EDU ATLA 10 Bluetooth and EC battery driver And miscellaneous cleanups / refactoring / improvements" * tag 'platform-drivers-x86-v6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (133 commits) platform/x86: acer-wmi: Fix initialization of last_non_turbo_profile platform/x86: acer-wmi: Ignore AC events platform/mellanox: mlxreg-io: use sysfs_emit() instead of sprintf() platform/mellanox: mlxreg-hotplug: use sysfs_emit() instead of sprintf() platform/mellanox: mlxbf-bootctl: use sysfs_emit() instead of sprintf() platform/x86: hp-wmi: Add fan and thermal profile support for Victus 16-s1000 ACPI: platform_profile: Add a prefix to log messages ACPI: platform_profile: Add documentation ACPI: platform_profile: Clean platform_profile_handler ACPI: platform_profile: Move platform_profile_handler ACPI: platform_profile: Remove platform_profile_handler from exported symbols platform/x86: thinkpad_acpi: Use devm_platform_profile_register() platform/x86: inspur_platform_profile: Use devm_platform_profile_register() platform/x86: hp-wmi: Use devm_platform_profile_register() platform/x86: ideapad-laptop: Use devm_platform_profile_register() platform/x86: dell-pc: Use devm_platform_profile_register() platform/x86: asus-wmi: Use devm_platform_profile_register() platform/x86: amd: pmf: sps: Use devm_platform_profile_register() platform/x86: acer-wmi: Use devm_platform_profile_register() platform/surface: surface_platform_profile: Use devm_platform_profile_register() ...
2025-01-24drm/amd/display: Optimize cursor position updatesAric Cyr
[why] Updating the cursor enablement register can be a slow operation and accumulates when high polling rate cursors cause frequent updates asynchronously to the cursor position. [how] Since the cursor enable bit is cached there is no need to update the enablement register if there is no change to it. This removes the read-modify-write from the cursor position programming path in HUBP and DPP, leaving only the register writes. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Sung Lee <sung.lee@amd.com> Signed-off-by: Aric Cyr <Aric.Cyr@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-24drm/amd/display: Add hubp cache reset when powergatingAric Cyr
[Why] When HUBP is power gated, the SW state can get out of sync with the hardware state causing cursor to not be programmed correctly. [How] Similar to DPP, add a HUBP reset function which is called wherever HUBP is initialized or powergated. This function will clear the cursor position and attribute cache allowing for proper programming when the HUBP is brought back up. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Sung Lee <sung.lee@amd.com> Signed-off-by: Aric Cyr <Aric.Cyr@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-24drm/amd/amdgpu: Enable scratch data dump for mes 12Shaoyun Liu
MES internal will check CP_MES_MSCRATCH_LO/HI register to set scratch data location during ucode start, driver side need to start the MES one by one with different setting for each pipe Signed-off-by: Shaoyun Liu <shaoyun.liu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-24drm/amd: Clarify kdoc for amdgpu.gttsizeMario Limonciello
Effectively amdgpu.gttsize gets set to ~1/2 of RAM, but that's controlled by what the TTM page limit is set to. Clarify the kdoc. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-24drm/amd/amdgpu: Prevent null pointer dereference in GPU bandwidth calculationSrinivasan Shanmugam
If the parent is NULL, adev->pdev is used to retrieve the PCIe speed and width, ensuring that the function can still determine these capabilities from the device itself. Fixes the below: drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:6193 amdgpu_device_gpu_bandwidth() error: we previously assumed 'parent' could be null (see line 6180) drivers/gpu/drm/amd/amdgpu/amdgpu_device.c 6170 static void amdgpu_device_gpu_bandwidth(struct amdgpu_device *adev, 6171 enum pci_bus_speed *speed, 6172 enum pcie_link_width *width) 6173 { 6174 struct pci_dev *parent = adev->pdev; 6175 6176 if (!speed || !width) 6177 return; 6178 6179 parent = pci_upstream_bridge(parent); 6180 if (parent && parent->vendor == PCI_VENDOR_ID_ATI) { ^^^^^^ If parent is NULL 6181 /* use the upstream/downstream switches internal to dGPU */ 6182 *speed = pcie_get_speed_cap(parent); 6183 *width = pcie_get_width_cap(parent); 6184 while ((parent = pci_upstream_bridge(parent))) { 6185 if (parent->vendor == PCI_VENDOR_ID_ATI) { 6186 /* use the upstream/downstream switches internal to dGPU */ 6187 *speed = pcie_get_speed_cap(parent); 6188 *width = pcie_get_width_cap(parent); 6189 } 6190 } 6191 } else { 6192 /* use the device itself */ --> 6193 *speed = pcie_get_speed_cap(parent); ^^^^^^ Then we are toasted here. 6194 *width = pcie_get_width_cap(parent); 6195 } 6196 } Fixes: 757e8b951ce2 ("drm/amdgpu: cache gpu pcie link width") Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Suggested-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-24drm/amd/display: Fix error pointers in amdgpu_dm_crtc_mem_type_changedSrinivasan Shanmugam
The function amdgpu_dm_crtc_mem_type_changed was dereferencing pointers returned by drm_atomic_get_plane_state without checking for errors. This could lead to undefined behavior if the function returns an error pointer. This commit adds checks using IS_ERR to ensure that new_plane_state and old_plane_state are valid before dereferencing them. Fixes the below: drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:11486 amdgpu_dm_crtc_mem_type_changed() error: 'new_plane_state' dereferencing possible ERR_PTR() drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c 11475 static bool amdgpu_dm_crtc_mem_type_changed(struct drm_device *dev, 11476 struct drm_atomic_state *state, 11477 struct drm_crtc_state *crtc_state) 11478 { 11479 struct drm_plane *plane; 11480 struct drm_plane_state *new_plane_state, *old_plane_state; 11481 11482 drm_for_each_plane_mask(plane, dev, crtc_state->plane_mask) { 11483 new_plane_state = drm_atomic_get_plane_state(state, plane); 11484 old_plane_state = drm_atomic_get_plane_state(state, plane); ^^^^^^^^^^^^^^^^^^^^^^^^^^ These functions can fail. 11485 --> 11486 if (old_plane_state->fb && new_plane_state->fb && 11487 get_mem_type(old_plane_state->fb) != get_mem_type(new_plane_state->fb)) 11488 return true; 11489 } 11490 11491 return false; 11492 } Fixes: 4caacd1671b7 ("drm/amd/display: Do not elevate mem_type change to full update") Cc: Leo Li <sunpeng.li@amd.com> Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Roman Li <roman.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-24drm/amdgpu: fix ring timeout issue in gfx10 sr-iov environmentLin.Cao
commit 26c95e838e63 ("drm/amdgpu: set the VM pointer to NULL in amdgpu_job_prepare") set job->vm as NULL if there is no fence. It will cause emit switch buffer be skippen if job->vm set as NULL. Check job rather than vm could solve this problem. Fixes: 26c95e838e63 ("drm/amdgpu: set the VM pointer to NULL in amdgpu_job_prepare") Signed-off-by: Lin.Cao <lincao12@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-24drm/amd/pm: Fix smu v13.0.6 caps initializationLijo Lazar
Fix the initialization and usage of SMU v13.0.6 capability values. Use caps_set/clear functions to set/clear capability. Also, fix SET_UCLK_MAX capability on APUs, it is supported on APUs. Fixes: e9b86b841baf ("drm/amd/pm: Add capability flags for SMU v13.0.6") Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Reviewed-by: Asad Kamal <asad.kamal@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-24drm/amd/pm: Refactor SMU 13.0.6 SDMA reset firmware version checksJesse.zhang@amd.com
This patch refactors the firmware version checks in `smu_v13_0_6_reset_sdma` to support multiple SMU programs with different firmware version thresholds. V2: return -EOPNOTSUPP for unspported pmfw Suggested-by: Lazar Lijo <Lijo.Lazar@amd.com> Signed-off-by: Jesse Zhang <jesse.zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-24revert "drm/amdgpu/pm: add definition PPSMC_MSG_ResetSDMA2"Jesse.zhang@amd.com
pmfw now unifies PPSMC_MSG_ResetSDMA definitions for different devices. PPSMC_MSG_ResetSDMA2 is not needed. Signed-off-by: Jesse Zhang <jesse.zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-24revert "drm/amdgpu/pm: Implement SDMA queue reset for different asic"Jesse.zhang@amd.com
pmfw unified PPSMC_MSG_ResetSDMA definitions for different devices. PPSMC_MSG_ResetSDMA2 is not needed. Signed-off-by: Jesse Zhang <jesse.zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-24drm/amd/pm: Add capability flags for SMU v13.0.6Lijo Lazar
Add capability flags for SMU v13.0.6 variants. Initialize the flags based on firmware support. As there are multiple IP versions maintained, it is more manageable with one time initialization of caps flags based on IP version and firmware feature support. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Asad Kamal <asad.kamal@amd.com> Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-24drm/amd/display: fix SUBVP DC_DEBUG_MASK documentationAlex Deucher
This needs to be kerneldoc formatted. Fixes: 5349658fa4a1 ("drm/amd: Add debug option to disable subvp") Reviewed-by: Harry Wentland <harry.wentland@amd.com> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
2025-01-24drm/amd/display: fix CEC DC_DEBUG_MASK documentationAlex Deucher
This needs to be kerneldoc formatted. Fixes: 7594874227e1 ("drm/amd/display: add CEC notifier to amdgpu driver") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Kun Liu <Kun.Liu2@amd.com>
2025-01-24drm/amdgpu: fix the PCIe lanes reporting in the INFO IOCTLAlex Deucher
Combine the platform and GPU caps like we do for PCIe Gen. This aligns properly with expectations and documentation for the interface. Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3820 Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-24drm/amdgpu: cache gpu pcie link widthAlex Deucher
Get the PCIe link with of the device itself (or it's integrated upstream bridge) and cache that. v2: fix typo Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3820 Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-24drm/amd/display: mark static functions noinline_for_stackTzung-Bi Shih
When compiling allmodconfig (CONFIG_WERROR=y) with clang-19, see the following errors: .../display/dc/dml2/display_mode_core.c:6268:13: warning: stack frame size (3128) exceeds limit (3072) in 'dml_prefetch_check' [-Wframe-larger-than] .../display/dc/dml2/dml21/src/dml2_core/dml2_core_dcn4_calcs.c:7236:13: warning: stack frame size (3256) exceeds limit (3072) in 'dml_core_mode_support' [-Wframe-larger-than] Mark static functions called by dml_prefetch_check() and dml_core_mode_support() noinline_for_stack to avoid them become huge functions and thus exceed the frame size limit. A way to reproduce: $ git checkout next-20250107 $ mkdir build_dir $ export PATH=/tmp/llvm-19.1.6-x86_64/bin:$PATH $ make LLVM=1 O=build_dir allmodconfig $ make LLVM=1 O=build_dir drivers/gpu/drm/ -j The way how it chose static functions to mark: [0] Unset CONFIG_WERROR in build_dir/.config. To get display_mode_core.o without errors. [1] Get a function list called by dml_prefetch_check(). $ sed -n '6268,6711p' drivers/gpu/drm/amd/display/dc/dml2/display_mode_core.c \ | sed -n -r 's/.*\W(\w+)\(.*/\1/p' | sort -u >/tmp/syms [2] Get the non-inline function list. Objdump won't show the symbols if they are inline functions. $ make LLVM=1 O=build_dir drivers/gpu/drm/ -j $ objdump -d build_dir/.../display_mode_core.o | \ ./scripts/checkstack.pl x86_64 0 | \ grep -f /tmp/syms | cut -d' ' -f2- >/tmp/orig [3] Get the full function list. Append "-fno-inline" to `CFLAGS_.../display_mode_core.o` in drivers/gpu/drm/amd/display/dc/dml2/Makefile. $ make LLVM=1 O=build_dir drivers/gpu/drm/ -j $ objdump -d build_dir/.../display_mode_core.o | \ ./scripts/checkstack.pl x86_64 0 | \ grep -f /tmp/syms | cut -d' ' -f2- >/tmp/noinline [4] Get the inline function list. If a symbol only in /tmp/noinline but not in /tmp/orig, it is a good candidate to mark noinline. $ diff /tmp/orig /tmp/noinline Chosen functions and their stack sizes: CalculateBandwidthAvailableForImmediateFlip [display_mode_core.o]:144 CalculateExtraLatency [display_mode_core.o]:176 CalculateTWait [display_mode_core.o]:64 CalculateVActiveBandwithSupport [display_mode_core.o]:112 set_calculate_prefetch_schedule_params [display_mode_core.o]:48 CheckGlobalPrefetchAdmissibility [dml2_core_dcn4_calcs.o]:544 calculate_bandwidth_available [dml2_core_dcn4_calcs.o]:320 calculate_vactive_det_fill_latency [dml2_core_dcn4_calcs.o]:272 CalculateDCFCLKDeepSleep [dml2_core_dcn4_calcs.o]:208 CalculateODMMode [dml2_core_dcn4_calcs.o]:208 CalculateOutputLink [dml2_core_dcn4_calcs.o]:176 Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-24drm/amdkfd: Clear MODE.VSKIP in gfx9 trap handlerJay Cornwall
If user shader issues S_SETVSKIP then this state will persist when executing the trap handler, causing vector instructions to be skipped. VSKIP state is already saved/restored through the MODE register. Signed-off-by: Jay Cornwall <jay.cornwall@amd.com> Reviewed-by: Lancelot Six <lancelot.six@amd.com> Suggested-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-24drm/amdgpu: Refine ip detection log messageLijo Lazar
'add ip block' causes a confusion if the blocks are disabled later with ip_block_mask. Instead change to 'detected' and also add device context. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Asad Kamal <asad.kamal@amd.com> Suggested-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-24drm/amdgpu: Add handler for SDMA context emptyLijo Lazar
Context empty interrupt is enabled for SDMA 4.4.2. Add a handler for context empty interrupt so that it is disposed of fast, and not propagated to KFD layer. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Suggested-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-24drm/amd: Add debug option to disable subvpAurabindo Pillai
Some monitors flicker when subvp is enabled which maybe related to an uncommon timing they use. To isolate such issues, add a debug option to help isolate this the issue for debugging. Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Suggested-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-24drm/amdkfd: Sync trap handler binary with sourceJay Cornwall
Source and binary have become mismatched during branch activity. Signed-off-by: Jay Cornwall <jay.cornwall@amd.com> Reviewed-by: Lancelot Six <lancelot.six@amd.com> Suggested-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-24drm/amdkfd: Fix partial migrate issueEmily Deng
For partial migrate from ram to vram, the migrate->cpages is not equal to migrate->npages, should use migrate->npages to check all needed migrate pages which could be copied or not. And only need to set those pages could be migrated to migrate->dst[i], or the migrate_vma_pages will migrate the wrong pages based on the migrate->dst[i]. v2: Add mpages to break the loop earlier. v3: Uses MIGRATE_PFN_MIGRATE to identify whether page could be migrated. v4: Correct the error part. Signed-off-by: Emily Deng <Emily.Deng@amd.com> Reviewed-by: Philip Yang<Philip.Yang@amd.com> Suggested-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-24Merge tag 'x86_tdx_for_6.14-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 TDX updates from Dave Hansen: "Intel Trust Domain updates. The existing TDX code needs a _bit_ of metadata from the TDX module. But KVM is going to need a bunch more very shortly. Rework the interface with the TDX module to be more consistent and handle the new higher volume. The TDX module has added a few new features. The first is a promise not to clobber RBP under any circumstances. Basically the kernel now will refuse to use any modules that don't have this promise. Second, enable the new "REDUCE_VE" feature. This ensures that the TDX module will not send some silly virtualization exceptions that the guest had no good way to handle anyway. - Centralize global metadata infrastructure - Use new TDX module features for exception suppression and RBP clobbering" * tag 'x86_tdx_for_6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/virt/tdx: Require the module to assert it has the NO_RBP_MOD mitigation x86/virt/tdx: Switch to use auto-generated global metadata reading code x86/virt/tdx: Use dedicated struct members for PAMT entry sizes x86/virt/tdx: Use auto-generated code to read global metadata x86/virt/tdx: Start to track all global metadata in one structure x86/virt/tdx: Rename 'struct tdx_tdmr_sysinfo' to reflect the spec better x86/tdx: Dump attributes and TD_CTLS on boot x86/tdx: Disable unnecessary virtualization exceptions
2025-01-24Merge tag 'x86-boot-2025-01-21' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 boot updates from Ingo Molnar: - A large and involved preparatory series to pave the way to add exception handling for relocate_kernel - which will be a debugging facility that has aided in the field to debug an exceptionally hard to debug early boot bug. Plus assorted cleanups and fixes that were discovered along the way, by David Woodhouse: - Clean up and document register use in relocate_kernel_64.S - Use named labels in swap_pages in relocate_kernel_64.S - Only swap pages for ::preserve_context mode - Allocate PGD for x86_64 transition page tables separately - Copy control page into place in machine_kexec_prepare() - Invoke copy of relocate_kernel() instead of the original - Move relocate_kernel to kernel .data section - Add data section to relocate_kernel - Drop page_list argument from relocate_kernel() - Eliminate writes through kernel mapping of relocate_kernel page - Clean up register usage in relocate_kernel() - Mark relocate_kernel page as ROX instead of RWX - Disable global pages before writing to control page - Ensure preserve_context flag is set on return to kernel - Use correct swap page in swap_pages function - Fix stack and handling of re-entry point for ::preserve_context - Mark machine_kexec() with __nocfi - Cope with relocate_kernel() not being at the start of the page - Use typedef for relocate_kernel_fn function prototype - Fix location of relocate_kernel with -ffunction-sections (fix by Nathan Chancellor) - A series to remove the last remaining absolute symbol references from .head.text, and enforce this at build time, by Ard Biesheuvel: - Avoid WARN()s and panic()s in early boot code - Don't hang but terminate on failure to remap SVSM CA - Determine VA/PA offset before entering C code - Avoid intentional absolute symbol references in .head.text - Disable UBSAN in early boot code - Move ENTRY_TEXT to the start of the image - Move .head.text into its own output section - Reject absolute references in .head.text - The above build-time enforcement uncovered a handful of bugs of essentially non-working code, and a wrokaround for a toolchain bug, fixed by Ard Biesheuvel as well: - Fix spurious undefined reference when CONFIG_X86_5LEVEL=n, on GCC-12 - Disable UBSAN on SEV code that may execute very early - Disable ftrace branch profiling in SEV startup code - And miscellaneous cleanups: - kexec_core: Add and update comments regarding the KEXEC_JUMP flow (Rafael J. Wysocki) - x86/sysfs: Constify 'struct bin_attribute' (Thomas Weißschuh)" * tag 'x86-boot-2025-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits) x86/sev: Disable ftrace branch profiling in SEV startup code x86/kexec: Use typedef for relocate_kernel_fn function prototype x86/kexec: Cope with relocate_kernel() not being at the start of the page kexec_core: Add and update comments regarding the KEXEC_JUMP flow x86/kexec: Mark machine_kexec() with __nocfi x86/kexec: Fix location of relocate_kernel with -ffunction-sections x86/kexec: Fix stack and handling of re-entry point for ::preserve_context x86/kexec: Use correct swap page in swap_pages function x86/kexec: Ensure preserve_context flag is set on return to kernel x86/kexec: Disable global pages before writing to control page x86/sev: Don't hang but terminate on failure to remap SVSM CA x86/sev: Disable UBSAN on SEV code that may execute very early x86/boot/64: Fix spurious undefined reference when CONFIG_X86_5LEVEL=n, on GCC-12 x86/sysfs: Constify 'struct bin_attribute' x86/kexec: Mark relocate_kernel page as ROX instead of RWX x86/kexec: Clean up register usage in relocate_kernel() x86/kexec: Eliminate writes through kernel mapping of relocate_kernel page x86/kexec: Drop page_list argument from relocate_kernel() x86/kexec: Add data section to relocate_kernel x86/kexec: Move relocate_kernel to kernel .data section ...
2025-01-24Merge tag 'perf-tools-for-v6.14-2025-01-21' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools Pull perf-tools updates from Namhyung Kim: "There are a lot of changes in the perf tools in this cycle. build: - Use generic syscall table to generate syscall numbers on supported archs - This also enables to get rid of libaudit which was used for syscall numbers - Remove python2 support as it's deprecated for years - Fix issues on static build with libzstd perf record: - Intel-PT supports "aux-action" config term to pause or resume tracing in the aux-buffer. Users can start the intel_pt event as "started-paused" and configure other events to control the Intel-PT tracing: # perf record --kcore -e intel_pt/aux-action=start-paused/ \ -e syscalls:sys_enter_newuname/aux-action=resume/ \ -e syscalls:sys_exit_newuname/aux-action=pause/ -- uname This requires kernel support (which was added in v6.13) perf lock: - 'perf lock contention' command has an ability to symbolize locks in dynamically allocated objects using slab cache name when it runs with BPF. Those dynamic locks would have "&" prefix in the name to distinguish them from ordinary (static) locks # perf lock con -abl -E 5 sleep 1 contended total wait max wait avg wait address symbol 2 1.95 us 1.77 us 975 ns ffff9d5e852d3498 &task_struct (mutex) 1 1.18 us 1.18 us 1.18 us ffff9d5e852d3538 &task_struct (mutex) 4 1.12 us 354 ns 279 ns ffff9d5e841ca800 &kmalloc-cg-512 (mutex) 2 859 ns 617 ns 429 ns ffffffffa41c3620 delayed_uprobe_lock (mutex) 3 691 ns 388 ns 230 ns ffffffffa41c0940 pack_mutex (mutex) This also requires kernel/BPF support (which was added in v6.13) perf ftrace: - 'perf ftrace latency' command gets a couple of options to support linear buckets instead of exponential. Also it's possible to specify max and min latency for the linear buckets: # perf ftrace latency -abn -T switch_mm_irqs_off --bucket-range=100 \ --min-latency=200 --max-latency=800 -- sleep 1 # DURATION | COUNT | GRAPH | 0 - 200 ns | 186 | ### | 200 - 300 ns | 256 | ##### | 300 - 400 ns | 364 | ####### | 400 - 500 ns | 223 | #### | 500 - 600 ns | 111 | ## | 600 - 700 ns | 41 | | 700 - 800 ns | 141 | ## | 800 - ... ns | 169 | ### | # statistics (in nsec) total time: 2162212 avg time: 967 max time: 16817 min time: 132 count: 2236 - As you can see in the above example, it nows shows the statistics at the end so that users can see the avg/max/min latencies easily - 'perf ftrace profile' command has --graph-opts option like 'perf ftrace trace' so that it can control the tracing behaviors in the same way. For example, it can limit the function call depth or threshold perf script: - Improve physical memory resolution in 'mem-phys-addr' script by parsing /proc/iomem file # perf script mem-phys-addr -- find / ... Event: mem_inst_retired.all_loads:P Memory type count percentage ---------------------------------------- ---------- ---------- 100000000-85f7fffff : System RAM 8929 69.7 547600000-54785d23f : Kernel data 1240 9.7 546a00000-5474bdfff : Kernel rodata 490 3.8 5480ce000-5485fffff : Kernel bss 121 0.9 0-fff : Reserved 3860 30.1 100000-89c01fff : System RAM 18 0.1 8a22c000-8df6efff : System RAM 5 0.0 Others: - 'perf test' gets --runs-per-test option to run the test cases repeatedly. This would be helpful to see if it's flaky - Add 'parse_events' method to Python perf extension module, so that users can use the same event parsing logic in the python code. One more step towards implementing perf tools in Python. :) - Support opening tracepoint events without libtraceevent. This will be helpful if it won't use the tracing data like in 'perf stat' - Update ARM Neoverse N2/V2 JSON events and metrics" * tag 'perf-tools-for-v6.14-2025-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (176 commits) perf test: Update event_groups test to use instructions perf bench: Fix undefined behavior in cmpworker() perf annotate: Prefer passing evsel to evsel->core.idx perf lock: Rename fields in lock_type_table perf lock: Add percpu-rwsem for type filter perf lock: Fix parse_lock_type which only retrieve one lock flag perf lock: Fix return code for functions in __cmd_contention perf hist: Fix width calculation in hpp__fmt() perf hist: Fix bogus profiles when filters are enabled perf hist: Deduplicate cmp/sort/collapse code perf test: Improve verbose documentation perf test: Add a runs-per-test flag perf test: Fix parallel/sequential option documentation perf test: Send list output to stdout rather than stderr perf test: Rename functions and variables for better clarity perf tools: Expose quiet/verbose variables in Makefile.perf perf config: Add a function to set one variable in .perfconfig perf test perftool_testsuite: Return correct value for skipping perf test perftool_testsuite: Add missing description perf test record+probe_libc_inet_pton: Make test resilient ...
2025-01-24Merge tag 'arm-soc/for-6.14/defconfig-arm64' of ↵Arnd Bergmann
https://github.com/Broadcom/stblinux into soc/defconfig This pull request contains Broadcom ARM64-based SoCs defconfig updates for 6.14, please pull the following: - Stefan enables the pinctrl-based I2C mux driver which is used on Raspberry Pi 4 based systems since we switched the Device Tree files to use the i2c mux representation * tag 'arm-soc/for-6.14/defconfig-arm64' of https://github.com/Broadcom/stblinux: arm64: defconfig: Enable pinctrl-based I2C mux Link: https://lore.kernel.org/r/20250123203302.1491843-1-florian.fainelli@broadcom.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-24Merge tag 'drm-misc-fixes-2025-01-24' of ↵Simona Vetter
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next Short summary of fixes pull: bochs: - Fix double-free on driver removal client: - Improve support for tile-based modes - Fix fbdev Kconfig select rules xlnx: - zynqmp_dp: Add locking to DP-bridge enable helper Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20250124082932.GA13715@linux.fritz.box
2025-01-24Merge tag 'nand/for-6.14' into mtd/nextMiquel Raynal
* Raw NAND changes A new controller driver, from Nuvoton, has been merged. Bastien Curutchet has contributed a series improving the Davinci controller driver, both on the organization of the code, but also on the performance side. The binding has also been converted to yaml, received a new OOB layout and now supports on-die ECC engines. The Qualcomm controller driver has been deeply cleaned to extract some parts of the code into a shared file with the Qualcomm SPI memory controller. Aside from these main changes, the Cadence binding has been converted to yaml, the brcmnand controller driver has received a small fix, otherwise some more minor changes have also made their way in. * SPI NAND changes The SPI NAND subsystem has seen a great improvement, with the advent of DTR operations (DDR operations, which may be extended to the address cycles). The first vendor driver to benefit from these improvements is the Winbond driver. A new manufacturer driver is added SkyHigh, with a new constraint for the core, it is impossible to disable the on-die ECC engine. A Foresee device is also now supported.
2025-01-24Merge tag 'spi-nor/for-6.14' into mtd/nextMiquel Raynal
SPI NOR changes for 6.14 Notable changes: - Add flash entries for Atmel AT25SF321, Spansion S28HL256T, S28HL02GT. - Add support for vcc-supply regulators and their DT bindings. - Drop mx25u25635f entry. The flash shares its ID with mx25u25645g and both parts have an SFDP table. Removing their entry lets them be driven by the generic SFDP-based driver.
2025-01-24drm: zynqmp_dp: Unlock on error in zynqmp_dp_bridge_atomic_enable()Dan Carpenter
We added some locking to this function, but accidentally forgot to unlock if zynqmp_dp_mode_configure() failed. Use a guard lock to fix it. Fixes: a7d5eeaa57d7 ("drm: zynqmp_dp: Add locking") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Sean Anderson <sean.anderson@linux.dev> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/b4042bd9-c943-4738-a2e1-8647259137c6@stanley.mountain
2025-01-23Merge tag 'sched_ext-for-6.14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext Pull sched_ext updates from Tejun Heo: - scx_bpf_now() added so that BPF scheduler can access the cached timestamp in struct rq to avoid reading TSC multiple times within a locked scheduling operation. - Minor updates to the built-in idle CPU selection logic. - tool/sched_ext updates and other misc changes. * tag 'sched_ext-for-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext: sched_ext: fix kernel-doc warnings sched_ext: Use time helpers in BPF schedulers sched_ext: Replace bpf_ktime_get_ns() to scx_bpf_now() sched_ext: Add time helpers for BPF schedulers sched_ext: Add scx_bpf_now() for BPF scheduler sched_ext: Implement scx_bpf_now() sched_ext: Relocate scx_enabled() related code sched_ext: Add option -l in selftest runner to list all available tests sched_ext: Include remaining task time slice in error state dump sched_ext: update scx_bpf_dsq_insert() doc for SCX_DSQ_LOCAL_ON sched_ext: idle: small CPU iteration refactoring sched_ext: idle: introduce check_builtin_idle_enabled() helper sched_ext: idle: clarify comments sched_ext: idle: use assign_cpu() to update the idle cpumask sched_ext: Use str_enabled_disabled() helper in update_selcpu_topology() sched_ext: Use sizeof_field for key_len in dsq_hash_params tools/sched_ext: Receive updates from SCX repo sched_ext: Use the NUMA scheduling domain for NUMA optimizations
2025-01-23Merge tag 'trace-ringbuffer-v6.14-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull trace fing buffer fix from Steven Rostedt: "Fix atomic64 operations on some architectures for the tracing ring buffer: - Have emulating atomic64 use arch_spin_locks instead of raw_spin_locks The tracing ring buffer events have a small timestamp that holds the delta between itself and the event before it. But this can be tricky to update when interrupts come in. It originally just set the deltas to zero for events that interrupted the adding of another event which made all the events in the interrupt have the same timestamp as the event it interrupted. This was not suitable for many tools, so it was eventually fixed. But that fix required adding an atomic64 cmpxchg on the timestamp in cases where an event was added while another event was in the process of being added. Originally, for 32 bit architectures, the manipulation of the 64 bit timestamp was done by a structure that held multiple 32bit words to hold parts of the timestamp and a counter. But as updates to the ring buffer were done, maintaining this became too complex and was replaced by the atomic64 generic operations which are now used by both 64bit and 32bit architectures. Shortly after that, it was reported that riscv32 and other 32 bit architectures that just used the generic atomic64 were locking up. This was because the generic atomic64 operations defined in lib/atomic64.c uses a raw_spin_lock() to emulate an atomic64 operation. The problem here was that raw_spin_lock() can also be traced by the function tracer (which is commonly used for debugging raw spin locks). Since the function tracer uses the tracing ring buffer, which now is being traced internally, this was triggering a recursion and setting off a warning that the spin locks were recusing. There's no reason for the code that emulates atomic64 operations to be using raw_spin_locks which have a lot of debugging infrastructure attached to them (depending on the config options). Instead it should be using the arch_spin_lock() which does not have any infrastructure attached to them and is used by low level infrastructure like RCU locks, lockdep and of course tracing. Using arch_spin_lock()s fixes this issue. - Do not trace in NMI if the architecture uses emulated atomic64 operations Another issue with using the emulated atomic64 operations that uses spin locks to emulate the atomic64 operations is that they cannot be used in NMI context. As an NMI can trigger while holding the atomic64 spin locks it can try to take the same lock and cause a deadlock. Have the ring buffer fail recording events if in NMI context and the architecture uses the emulated atomic64 operations" * tag 'trace-ringbuffer-v6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: atomic64: Use arch_spin_locks instead of raw_spin_locks ring-buffer: Do not allow events in NMI with generic atomic64 cmpxchg()
2025-01-23Merge tag 'ftrace-v6.14-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull fgraph updates from Steven Rostedt: "Remove calltime and rettime from fgraph infrastructure The calltime and rettime were used by the function graph tracer to calculate the timings of functions where it traced their entry and exit. The calltime and rettime were stored in the generic structures that were used for the mechanisms to add an entry and exit callback. Now that function graph infrastructure is used by other subsystems than just the tracer, the calltime and rettime are not needed for them. Remove the calltime and rettime from the generic fgraph infrastructure and have the callers that require them handle them" * tag 'ftrace-v6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: fgraph: Remove calltime and rettime from generic operations
2025-01-23Merge tag 'trace-v6.14-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing updates from Steven Rostedt: - Cleanup with guard() and free() helpers There were several places in the code that had a lot of "goto out" in the error paths to either unlock a lock or free some memory that was allocated. But this is error prone. Convert the code over to use the guard() and free() helpers that let the compiler unlock locks or free memory when the function exits. - Update the Rust tracepoint code to use the C code too There was some duplication of the tracepoint code for Rust that did the same logic as the C code. Add a helper that makes it possible for both algorithms to use the same logic in one place. - Add poll to trace event hist files It is useful to know when an event is triggered, or even with some filtering. Since hist files of events get updated when active and the event is triggered, allow applications to poll the hist file and wake up when an event is triggered. This will let the application know that the event it is waiting for happened. - Add :mod: command to enable events for current or future modules The function tracer already has a way to enable functions to be traced in modules by writing ":mod:<module>" into set_ftrace_filter. That will enable either all the functions for the module if it is loaded, or if it is not, it will cache that command, and when the module is loaded that matches <module>, its functions will be enabled. This also allows init functions to be traced. But currently events do not have that feature. Add the command where if ':mod:<module>' is written into set_event, then either all the modules events are enabled if it is loaded, or cache it so that the module's events are enabled when it is loaded. This also works from the kernel command line, where "trace_event=:mod:<module>", when the module is loaded at boot up, its events will be enabled then. * tag 'trace-v6.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (26 commits) tracing: Fix output of set_event for some cached module events tracing: Fix allocation of printing set_event file content tracing: Rename update_cache() to update_mod_cache() tracing: Fix #if CONFIG_MODULES to #ifdef CONFIG_MODULES selftests/ftrace: Add test that tests event :mod: commands tracing: Cache ":mod:" events for modules not loaded yet tracing: Add :mod: command to enabled module events selftests/tracing: Add hist poll() support test tracing/hist: Support POLLPRI event for poll on histogram tracing/hist: Add poll(POLLIN) support on hist file tracing: Fix using ret variable in tracing_set_tracer() tracepoint: Reduce duplication of __DO_TRACE_CALL tracing/string: Create and use __free(argv_free) in trace_dynevent.c tracing: Switch trace_stat.c code over to use guard() tracing: Switch trace_stack.c code over to use guard() tracing: Switch trace_osnoise.c code over to use guard() and __free() tracing: Switch trace_events_synth.c code over to use guard() tracing: Switch trace_events_filter.c code over to use guard() tracing: Switch trace_events_trigger.c code over to use guard() tracing: Switch trace_events_hist.c code over to use guard() ...
2025-01-23Merge tag 'ktest-6.14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest Pull ktest updates from Steven Rostedt: - Fix use of KERNEL_VERSION in newly created output directory If a new output directory is created (O=/dir), and one of the options uses KERNEL_VERSION which will run a "make kernelversion" in the output directory, it will fail because there is no config file yet. In this case, have it do a "make allnoconfig" which is the minimal needed to run the "make kernelversion". - Remove unused variables - Fix some typos * tag 'ktest-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest: ktest.pl: Fix typo "accesing" ktest.pl: Fix typo in comment ktest.pl: Remove unused declarations in run_bisect_test function ktest.pl: Check kernelrelease return in get_version
2025-01-23Merge tag 'probes-v6.14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull probes updates from Masami Hiramatsu: - kprobes: Cleanups using guard() and __free(): Use cleanup.h macros to cleanup code and remove all gotos from kprobes code. - tracing/probes: Also cleanups tracing/*probe events code with guard() and __free(). These patches are just to simplify the parser codes. - kprobes: Reduce preempt disable scope in check_kprobe_access_safe() This reduces preempt disable time to only when getting the module refcount in check_kprobe_access_safe(). Previously it disabled preempt needlessly for other checks including jump_label_text_reserved(), which took a long time because of the linear search. * tag 'probes-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing/kprobes: Simplify __trace_kprobe_create() by removing gotos tracing: Use __free() for kprobe events to cleanup tracing: Use __free() in trace_probe for cleanup kprobes: Remove remaining gotos kprobes: Remove unneeded goto kprobes: Use guard for rcu_read_lock kprobes: Use guard() for external locks jump_label: Define guard() for jump_label_lock tracing/eprobe: Adopt guard() and scoped_guard() tracing/uprobe: Adopt guard() and scoped_guard() tracing/kprobe: Adopt guard() and scoped_guard() kprobes: Adopt guard() and scoped_guard() kprobes: Reduce preempt disable scope in check_kprobe_access_safe()
2025-01-23Merge tag 'v6.14-rc-smb3-client-fixes-part' of ↵Linus Torvalds
git://git.samba.org/sfrench/cifs-2.6 Pull smb client updates from Steve French: - Fix oops in DebugData when link speed 0 - Two reparse point fixes - Ten DFS (global namespace) fixes - Symlink error handling fix - Two SMB1 fixes - Four cleanup fixes - Improved debugging of status codes - Fix incorrect output of tracepoints for compounding, and add missing compounding tracepoint * tag 'v6.14-rc-smb3-client-fixes-part' of git://git.samba.org/sfrench/cifs-2.6: (23 commits) smb: client: handle lack of EA support in smb2_query_path_info() smb: client: don't check for @leaf_fullpath in match_server() smb: client: get rid of TCP_Server_Info::refpath_lock cifs: Remove duplicate struct reparse_symlink_data and SYMLINK_FLAG_RELATIVE cifs: Do not attempt to call CIFSGetSrvInodeNumber() without CAP_INFOLEVEL_PASSTHRU cifs: Do not attempt to call CIFSSMBRenameOpenFile() without CAP_INFOLEVEL_PASSTHRU cifs: Remove declaration of dead CIFSSMBQuerySymLink function cifs: Fix printing Status code into dmesg cifs: Add missing NT_STATUS_* codes from nterr.h to nterr.c cifs: Fix endian types in struct rfc1002_session_packet cifs: Use cifs_autodisable_serverino() for disabling CIFS_MOUNT_SERVER_INUM in readdir.c smb3: add missing tracepoint for querying wsl EAs smb: client: fix order of arguments of tracepoints smb: client: fix oops due to unset link speed smb: client: correctly handle ErrorContextData as a flexible array smb: client: don't retry DFS targets on server shutdown smb: client: fix return value of parse_dfs_referrals() smb: client: optimize referral walk on failed link targets smb: client: provide dns_resolve_{unc,name} helpers smb: client: parse DNS domain name from domain= option ...
2025-01-23Merge tag 'v6.14-rc-ksmbd-server-fixes' of git://git.samba.org/ksmbdLinus Torvalds
Pull smb server updates from Steve French: "Three ksmbd server fixes: - Fix potential memory corruption in IPC calls - Support FSCTL_QUERY_INTERFACE_INFO for more configurations - Remove some unused functions" * tag 'v6.14-rc-ksmbd-server-fixes' of git://git.samba.org/ksmbd: ksmbd: fix integer overflows on 32 bit systems ksmbd: browse interfaces list on FSCTL_QUERY_INTERFACE_INFO IOCTL ksmbd: Remove unused functions
2025-01-23docs: dt-bindings: Document preferred line wrappingKrzysztof Kozlowski
There are some patches with long lines as a result of checkpatch enforcing 100, not 80, but checkpatch is only a tool not a coding style. The Linux Kernel Coding Style is still clear here on preferred limit. Mentioned preferred style of wrapping long lines in DTS, based on Linux Kernel Coding Style. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20250118102247.18257-1-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2025-01-23Merge tag 'fsnotify_hsm_for_v6.14-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull fsnotify pre-content notification support from Jan Kara: "This introduces a new fsnotify event (FS_PRE_ACCESS) that gets generated before a file contents is accessed. The event is synchronous so if there is listener for this event, the kernel waits for reply. On success the execution continues as usual, on failure we propagate the error to userspace. This allows userspace to fill in file content on demand from slow storage. The context in which the events are generated has been picked so that we don't hold any locks and thus there's no risk of a deadlock for the userspace handler. The new pre-content event is available only for users with global CAP_SYS_ADMIN capability (similarly to other parts of fanotify functionality) and it is an administrator responsibility to make sure the userspace event handler doesn't do stupid stuff that can DoS the system. Based on your feedback from the last submission, fsnotify code has been improved and now file->f_mode encodes whether pre-content event needs to be generated for the file so the fast path when nobody wants pre-content event for the file just grows the additional file->f_mode check. As a bonus this also removes the checks whether the old FS_ACCESS event needs to be generated from the fast path. Also the place where the event is generated during page fault has been moved so now filemap_fault() generates the event if and only if there is no uptodate folio in the page cache. Also we have dropped FS_PRE_MODIFY event as current real-world users of the pre-content functionality don't really use it so let's start with the minimal useful feature set" * tag 'fsnotify_hsm_for_v6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: (21 commits) fanotify: Fix crash in fanotify_init(2) fs: don't block write during exec on pre-content watched files fs: enable pre-content events on supported file systems ext4: add pre-content fsnotify hook for DAX faults btrfs: disable defrag on pre-content watched files xfs: add pre-content fsnotify hook for DAX faults fsnotify: generate pre-content permission event on page fault mm: don't allow huge faults for files with pre content watches fanotify: disable readahead if we have pre-content watches fanotify: allow to set errno in FAN_DENY permission response fanotify: report file range info with pre-content events fanotify: introduce FAN_PRE_ACCESS permission event fsnotify: generate pre-content permission event on truncate fsnotify: pass optional file access range in pre-content event fsnotify: introduce pre-content permission events fanotify: reserve event bit of deprecated FAN_DIR_MODIFY fanotify: rename a misnamed constant fanotify: don't skip extra event info if no info_mode is set fsnotify: check if file is actually being watched for pre-content events on open fsnotify: opt-in for permission events at file open time ...
2025-01-23Merge tag 'fs_for_v6.14-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull isofs update from Jan Kara: "Partial conversion of isofs to folios" * tag 'fs_for_v6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: isofs: Partially convert zisofs_read_folio to use a folio
2025-01-23dt-bindings: ufs: Correct indentation and style in DTS exampleKrzysztof Kozlowski
DTS example in the bindings should be indented with 2- or 4-spaces and aligned with opening '- |', so correct any differences like 3-spaces or mixtures 2- and 4-spaces in one binding. No functional changes here, but saves some comments during reviews of new patches built on existing code. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> # renesas Link: https://lore.kernel.org/r/20250107131019.246517-1-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2025-01-23Merge tag 'fsnotify_for_v6.14-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull inotify update from Jan Kara: "A small inotify strcpy() cleanup" * tag 'fsnotify_for_v6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: inotify: Use strscpy() for event->name copies
generated by cgit (git 2.34.1) at 2025-09-12 13:07:44 +0000