| Age | Commit message (Collapse) | Author |
|---|
|
Test that very high constant map keys are not interpreted as an error
value by the verifier. This would previously fail.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/r/c0590b62eb9303f389b2f52c0c7e9cf22a358a30.1738689872.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Previously, we were trying to extract constant map keys for all
bpf_map_lookup_elem(), regardless of map type. This is an issue if the
map has a u64 key and the value is very high, as it can be interpreted
as a negative signed value. This in turn is treated as an error value by
check_func_arg() which causes a valid program to be incorrectly
rejected.
Fix by only extracting constant map keys for relevant maps. This fix
works because nullness elision is only allowed for {PERCPU_}ARRAY maps,
and keys for these are within u32 range. See next commit for an example
via selftest.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reported-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/r/aa868b642b026ff87ba6105ea151bc8693b35932.1738689872.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
On an aarch64 kernel with CONFIG_PAGE_SIZE_64KB=y,
arena_htab tests cause a segmentation fault and soft lockup.
The same failure is not observed with 4k pages on aarch64.
It turns out arena_map_free() is calling
apply_to_existing_page_range() with the address returned by
bpf_arena_get_kern_vm_start(). If this address is not page-aligned
the code ends up calling apply_to_pte_range() with that unaligned
address causing soft lockup.
Fix it by round up GUARD_SZ to PAGE_SIZE << 1 so that the
division by 2 in bpf_arena_get_kern_vm_start() returns
a page-aligned value.
Fixes: 317460317a02 ("bpf: Introduce bpf_arena.")
Reported-by: Colm Harrington <colm.harrington@oracle.com>
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/r/20250205170059.427458-1-alan.maguire@oracle.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Yan Zhai reported a BPF prog could trigger a null-ptr-deref [0]
in trace_kfree_skb if the prog does not check if rx_sk is NULL.
Commit c53795d48ee8 ("net: add rx_sk to trace_kfree_skb") added
rx_sk to trace_kfree_skb, but rx_sk is optional and could be NULL.
Let's add kfree_skb to raw_tp_null_args[] to let the BPF verifier
validate such a prog and prevent the issue.
Now we fail to load such a prog:
libbpf: prog 'drop': -- BEGIN PROG LOAD LOG --
0: R1=ctx() R10=fp0
; int BPF_PROG(drop, struct sk_buff *skb, void *location, @ kfree_skb_sk_null.bpf.c:21
0: (79) r3 = *(u64 *)(r1 +24)
func 'kfree_skb' arg3 has btf_id 5253 type STRUCT 'sock'
1: R1=ctx() R3_w=trusted_ptr_or_null_sock(id=1)
; bpf_printk("sk: %d, %d\n", sk, sk->__sk_common.skc_family); @ kfree_skb_sk_null.bpf.c:24
1: (69) r4 = *(u16 *)(r3 +16)
R3 invalid mem access 'trusted_ptr_or_null_'
processed 2 insns (limit 1000000) max_states_per_insn 0 total_states 0 peak_states 0 mark_read 0
-- END PROG LOAD LOG --
Note this fix requires commit 838a10bd2ebf ("bpf: Augment raw_tp
arguments with PTR_MAYBE_NULL").
[0]:
BUG: kernel NULL pointer dereference, address: 0000000000000010
PF: supervisor read access in kernel mode
PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
PREEMPT SMP
RIP: 0010:bpf_prog_5e21a6db8fcff1aa_drop+0x10/0x2d
Call Trace:
<TASK>
? __die+0x1f/0x60
? page_fault_oops+0x148/0x420
? search_bpf_extables+0x5b/0x70
? fixup_exception+0x27/0x2c0
? exc_page_fault+0x75/0x170
? asm_exc_page_fault+0x22/0x30
? bpf_prog_5e21a6db8fcff1aa_drop+0x10/0x2d
bpf_trace_run4+0x68/0xd0
? unix_stream_connect+0x1f4/0x6f0
sk_skb_reason_drop+0x90/0x120
unix_stream_connect+0x1f4/0x6f0
__sys_connect+0x7f/0xb0
__x64_sys_connect+0x14/0x20
do_syscall_64+0x47/0xc30
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Fixes: c53795d48ee8 ("net: add rx_sk to trace_kfree_skb")
Reported-by: Yan Zhai <yan@cloudflare.com>
Closes: https://lore.kernel.org/netdev/Z50zebTRzI962e6X@debian.debian/
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Tested-by: Yan Zhai <yan@cloudflare.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20250201030142.62703-1-kuniyu@amazon.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The following commit
bc235cdb423a ("bpf: Prevent deadlock from recursive bpf_task_storage_[get|delete]")
first introduced deadlock prevention for fentry/fexit programs attaching
on bpf_task_storage helpers. That commit also employed the logic in map
free path in its v6 version.
Later bpf_cgrp_storage was first introduced in
c4bcfb38a95e ("bpf: Implement cgroup storage available to non-cgroup-attached bpf progs")
which faces the same issue as bpf_task_storage, instead of its busy
counter, NULL was passed to bpf_local_storage_map_free() which opened
a window to cause deadlock:
<TASK>
(acquiring local_storage->lock)
_raw_spin_lock_irqsave+0x3d/0x50
bpf_local_storage_update+0xd1/0x460
bpf_cgrp_storage_get+0x109/0x130
bpf_prog_a4d4a370ba857314_cgrp_ptr+0x139/0x170
? __bpf_prog_enter_recur+0x16/0x80
bpf_trampoline_6442485186+0x43/0xa4
cgroup_storage_ptr+0x9/0x20
(holding local_storage->lock)
bpf_selem_unlink_storage_nolock.constprop.0+0x135/0x160
bpf_selem_unlink_storage+0x6f/0x110
bpf_local_storage_map_free+0xa2/0x110
bpf_map_free_deferred+0x5b/0x90
process_one_work+0x17c/0x390
worker_thread+0x251/0x360
kthread+0xd2/0x100
ret_from_fork+0x34/0x50
ret_from_fork_asm+0x1a/0x30
</TASK>
Progs:
- A: SEC("fentry/cgroup_storage_ptr")
- cgid (BPF_MAP_TYPE_HASH)
Record the id of the cgroup the current task belonging
to in this hash map, using the address of the cgroup
as the map key.
- cgrpa (BPF_MAP_TYPE_CGRP_STORAGE)
If current task is a kworker, lookup the above hash
map using function parameter @owner as the key to get
its corresponding cgroup id which is then used to get
a trusted pointer to the cgroup through
bpf_cgroup_from_id(). This trusted pointer can then
be passed to bpf_cgrp_storage_get() to finally trigger
the deadlock issue.
- B: SEC("tp_btf/sys_enter")
- cgrpb (BPF_MAP_TYPE_CGRP_STORAGE)
The only purpose of this prog is to fill Prog A's
hash map by calling bpf_cgrp_storage_get() for as
many userspace tasks as possible.
Steps to reproduce:
- Run A;
- while (true) { Run B; Destroy B; }
Fix this issue by passing its busy counter to the free procedure so
it can be properly incremented before storage/smap locking.
Fixes: c4bcfb38a95e ("bpf: Implement cgroup storage available to non-cgroup-attached bpf progs")
Signed-off-by: Abel Wu <wuyun.abel@bytedance.com>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20241221061018.37717-1-wuyun.abel@bytedance.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Jiayuan Chen says:
====================
A previous commit described in this topic
http://lore.kernel.org/bpf/20230523025618.113937-9-john.fastabend@gmail.com
directly updated 'sk->copied_seq' in the tcp_eat_skb() function when the
action of a BPF program was SK_REDIRECT. For other actions, like SK_PASS,
the update logic for 'sk->copied_seq' was moved to
tcp_bpf_recvmsg_parser() to ensure the accuracy of the 'fionread' feature.
That commit works for a single stream_verdict scenario, as it also
modified 'sk_data_ready->sk_psock_verdict_data_ready->tcp_read_skb'
to remove updating 'sk->copied_seq'.
However, for programs where both stream_parser and stream_verdict are
active (strparser purpose), tcp_read_sock() was used instead of
tcp_read_skb() (sk_data_ready->strp_data_ready->tcp_read_sock).
tcp_read_sock() now still updates 'sk->copied_seq', leading to duplicated
updates.
In summary, for strparser + SK_PASS, copied_seq is redundantly calculated
in both tcp_read_sock() and tcp_bpf_recvmsg_parser().
The issue causes incorrect copied_seq calculations, which prevent
correct data reads from the recv() interface in user-land.
Also we added test cases for bpf + strparser and separated them from
sockmap_basic, as strparser has more encapsulation and parsing
capabilities compared to sockmap.
====================
Link: https://patch.msgid.link/20250122100917.49845-1-mrpre@163.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Add test cases for bpf + strparser and separated them from
sockmap_basic, as strparser has more encapsulation and parsing
capabilities compared to standard sockmap.
Signed-off-by: Jiayuan Chen <mrpre@163.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://patch.msgid.link/20250122100917.49845-6-mrpre@163.com
|
|
SOCK_NONBLOCK flag is only effective during socket creation, not during
recv. Use MSG_DONTWAIT instead.
Signed-off-by: Jiayuan Chen <mrpre@163.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://patch.msgid.link/20250122100917.49845-5-mrpre@163.com
|
|
Currently, only TCP supports strparser, but sockmap doesn't intercept
non-TCP connections to attach strparser. For example, with UDP, although
the read/write handlers are replaced, strparser is not executed due to
the lack of a read_sock operation.
Furthermore, in udp_bpf_recvmsg(), it checks whether the psock has data,
and if not, it falls back to the native UDP read interface, making
UDP + strparser appear to read correctly. According to its commit history,
this behavior is unexpected.
Moreover, since UDP lacks the concept of streams, we intercept it directly.
Fixes: 1fa1fe8ff161 ("bpf, sockmap: Test shutdown() correctly exits epoll and recv()=0")
Signed-off-by: Jiayuan Chen <mrpre@163.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://patch.msgid.link/20250122100917.49845-4-mrpre@163.com
|
|
'sk->copied_seq' was updated in the tcp_eat_skb() function when the action
of a BPF program was SK_REDIRECT. For other actions, like SK_PASS, the
update logic for 'sk->copied_seq' was moved to tcp_bpf_recvmsg_parser()
to ensure the accuracy of the 'fionread' feature.
It works for a single stream_verdict scenario, as it also modified
sk_data_ready->sk_psock_verdict_data_ready->tcp_read_skb
to remove updating 'sk->copied_seq'.
However, for programs where both stream_parser and stream_verdict are
active (strparser purpose), tcp_read_sock() was used instead of
tcp_read_skb() (sk_data_ready->strp_data_ready->tcp_read_sock).
tcp_read_sock() now still updates 'sk->copied_seq', leading to duplicate
updates.
In summary, for strparser + SK_PASS, copied_seq is redundantly calculated
in both tcp_read_sock() and tcp_bpf_recvmsg_parser().
The issue causes incorrect copied_seq calculations, which prevent
correct data reads from the recv() interface in user-land.
We do not want to add new proto_ops to implement a new version of
tcp_read_sock, as this would introduce code complexity [1].
We could have added noack and copied_seq to desc, and then called
ops->read_sock. However, unfortunately, other modules didn’t fully
initialize desc to zero. So, for now, we are directly calling
tcp_read_sock_noack() in tcp_bpf.c.
[1]: https://lore.kernel.org/bpf/20241218053408.437295-1-mrpre@163.com
Fixes: e5c6de5fa025 ("bpf, sockmap: Incorrectly handling copied_seq")
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Jiayuan Chen <mrpre@163.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://patch.msgid.link/20250122100917.49845-3-mrpre@163.com
|
|
Added a new read_sock handler, allowing users to customize read operations
instead of relying on the native socket's read_sock.
Signed-off-by: Jiayuan Chen <mrpre@163.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://patch.msgid.link/20250122100917.49845-2-mrpre@163.com
|
|
We use map->freeze_mutex to prevent races between map_freeze() and
memory mapping BPF map contents with writable permissions. The way we
naively do this means we'll hold freeze_mutex for entire duration of all
the mm and VMA manipulations, which is completely unnecessary. This can
potentially also lead to deadlocks, as reported by syzbot in [0].
So, instead, hold freeze_mutex only during writeability checks, bump
(proactively) "write active" count for the map, unlock the mutex and
proceed with mmap logic. And only if something went wrong during mmap
logic, then undo that "write active" counter increment.
[0] https://lore.kernel.org/bpf/678dcbc9.050a0220.303755.0066.GAE@google.com/
Fixes: fc9702273e2e ("bpf: Add mmap() support for BPF_MAP_TYPE_ARRAY")
Reported-by: syzbot+4dc041c686b7c816a71e@syzkaller.appspotmail.com
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20250129012246.1515826-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
For all BPF maps we ensure that VM_MAYWRITE is cleared when
memory-mapping BPF map contents as initially read-only VMA. This is
because in some cases BPF verifier relies on the underlying data to not
be modified afterwards by user space, so once something is mapped
read-only, it shouldn't be re-mmap'ed as read-write.
As such, it's not necessary to check VM_MAYWRITE in bpf_map_mmap() and
map->ops->map_mmap() callbacks: VM_WRITE should be consistently set for
read-write mappings, and if VM_WRITE is not set, there is no way for
user space to upgrade read-only mapping to read-write one.
This patch cleans up this VM_WRITE vs VM_MAYWRITE handling within
bpf_map_mmap(), which is an entry point for any BPF map mmap()-ing
logic. We also drop unnecessary sanitization of VM_MAYWRITE in BPF
ringbuf's map_mmap() callback implementation, as it is already performed
by common code in bpf_map_mmap().
Note, though, that in bpf_map_mmap_{open,close}() callbacks we can't
drop VM_MAYWRITE use, because it's possible (and is outside of
subsystem's control) to have initially read-write memory mapping, which
is subsequently dropped to read-only by user space through mprotect().
In such case, from BPF verifier POV it's read-write data throughout the
lifetime of BPF map, and is counted as "active writer".
But its VMAs will start out as VM_WRITE|VM_MAYWRITE, then mprotect() can
change it to just VM_MAYWRITE (and no VM_WRITE), so when its finally
munmap()'ed and bpf_map_mmap_close() is called, vm_flags will be just
VM_MAYWRITE, but we still need to decrement active writer count with
bpf_map_write_active_dec() as it's still considered to be a read-write
mapping by the rest of BPF subsystem.
Similar reasoning applies to bpf_map_mmap_open(), which is called
whenever mmap(), munmap(), and/or mprotect() forces mm subsystem to
split original VMA into multiple discontiguous VMAs.
Memory-mapping handling is a bit tricky, yes.
Cc: Jann Horn <jannh@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20250129012246.1515826-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The function bpf_test_init() now returns an error if user_size
(.data_size_in) is less than ETH_HLEN, causing the tests to
fail. Adjust the data size to ensure it meets the requirement of
ETH_HLEN.
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250121150643.671650-2-syoshida@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
KMSAN reported a use-after-free issue in eth_skb_pkt_type()[1]. The
cause of the issue was that eth_skb_pkt_type() accessed skb's data
that didn't contain an Ethernet header. This occurs when
bpf_prog_test_run_xdp() passes an invalid value as the user_data
argument to bpf_test_init().
Fix this by returning an error when user_data is less than ETH_HLEN in
bpf_test_init(). Additionally, remove the check for "if (user_size >
size)" as it is unnecessary.
[1]
BUG: KMSAN: use-after-free in eth_skb_pkt_type include/linux/etherdevice.h:627 [inline]
BUG: KMSAN: use-after-free in eth_type_trans+0x4ee/0x980 net/ethernet/eth.c:165
eth_skb_pkt_type include/linux/etherdevice.h:627 [inline]
eth_type_trans+0x4ee/0x980 net/ethernet/eth.c:165
__xdp_build_skb_from_frame+0x5a8/0xa50 net/core/xdp.c:635
xdp_recv_frames net/bpf/test_run.c:272 [inline]
xdp_test_run_batch net/bpf/test_run.c:361 [inline]
bpf_test_run_xdp_live+0x2954/0x3330 net/bpf/test_run.c:390
bpf_prog_test_run_xdp+0x148e/0x1b10 net/bpf/test_run.c:1318
bpf_prog_test_run+0x5b7/0xa30 kernel/bpf/syscall.c:4371
__sys_bpf+0x6a6/0xe20 kernel/bpf/syscall.c:5777
__do_sys_bpf kernel/bpf/syscall.c:5866 [inline]
__se_sys_bpf kernel/bpf/syscall.c:5864 [inline]
__x64_sys_bpf+0xa4/0xf0 kernel/bpf/syscall.c:5864
x64_sys_call+0x2ea0/0x3d90 arch/x86/include/generated/asm/syscalls_64.h:322
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xd9/0x1d0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Uninit was created at:
free_pages_prepare mm/page_alloc.c:1056 [inline]
free_unref_page+0x156/0x1320 mm/page_alloc.c:2657
__free_pages+0xa3/0x1b0 mm/page_alloc.c:4838
bpf_ringbuf_free kernel/bpf/ringbuf.c:226 [inline]
ringbuf_map_free+0xff/0x1e0 kernel/bpf/ringbuf.c:235
bpf_map_free kernel/bpf/syscall.c:838 [inline]
bpf_map_free_deferred+0x17c/0x310 kernel/bpf/syscall.c:862
process_one_work kernel/workqueue.c:3229 [inline]
process_scheduled_works+0xa2b/0x1b60 kernel/workqueue.c:3310
worker_thread+0xedf/0x1550 kernel/workqueue.c:3391
kthread+0x535/0x6b0 kernel/kthread.c:389
ret_from_fork+0x6e/0x90 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
CPU: 1 UID: 0 PID: 17276 Comm: syz.1.16450 Not tainted 6.12.0-05490-g9bb88c659673 #8
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014
Fixes: be3d72a2896c ("bpf: move user_size out of bpf_test_init")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Suggested-by: Martin KaFai Lau <martin.lau@linux.dev>
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://patch.msgid.link/20250121150643.671650-1-syoshida@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
When loading BPF programs, bpf_sk_storage_tracing_allowed() does a
series of lookups to get a type name from the program's attach_btf_id,
making the assumption that the type is present in the vmlinux BTF along
the way. However, this results in btf_type_by_id() returning a null
pointer if a non-vmlinux kernel BTF is attached to. Proof-of-concept on
a kernel with CONFIG_IPV6=m:
$ cat bpfcrash.c
#include <unistd.h>
#include <linux/bpf.h>
#include <sys/syscall.h>
static int bpf(enum bpf_cmd cmd, union bpf_attr *attr)
{
return syscall(__NR_bpf, cmd, attr, sizeof(*attr));
}
int main(void)
{
const int btf_fd = bpf(BPF_BTF_GET_FD_BY_ID, &(union bpf_attr) {
.btf_id = BTF_ID,
});
if (btf_fd < 0)
return 1;
const int bpf_sk_storage_get = 107;
const struct bpf_insn insns[] = {
{ .code = BPF_JMP | BPF_CALL, .imm = bpf_sk_storage_get},
{ .code = BPF_JMP | BPF_EXIT },
};
return bpf(BPF_PROG_LOAD, &(union bpf_attr) {
.prog_type = BPF_PROG_TYPE_TRACING,
.expected_attach_type = BPF_TRACE_FENTRY,
.license = (unsigned long)"GPL",
.insns = (unsigned long)&insns,
.insn_cnt = sizeof(insns) / sizeof(insns[0]),
.attach_btf_obj_fd = btf_fd,
.attach_btf_id = TYPE_ID,
});
}
$ sudo bpftool btf list | grep ipv6
2: name [ipv6] size 928200B
$ sudo bpftool btf dump id 2 | awk '$3 ~ /inet6_sock_destruct/'
[130689] FUNC 'inet6_sock_destruct' type_id=130677 linkage=static
$ gcc -D_DEFAULT_SOURCE -DBTF_ID=2 -DTYPE_ID=130689 \
bpfcrash.c -o bpfcrash
$ sudo ./bpfcrash
This causes a null pointer dereference:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
Call trace:
bpf_sk_storage_tracing_allowed+0x8c/0xb0 P
check_helper_call.isra.0+0xa8/0x1730
do_check+0xa18/0xb40
do_check_common+0x140/0x640
bpf_check+0xb74/0xcb8
bpf_prog_load+0x598/0x9a8
__sys_bpf+0x580/0x980
__arm64_sys_bpf+0x28/0x40
invoke_syscall.constprop.0+0x54/0xe8
do_el0_svc+0xb4/0xd0
el0_svc+0x44/0x1f8
el0t_64_sync_handler+0x13c/0x160
el0t_64_sync+0x184/0x188
Resolve this by using prog->aux->attach_func_name and removing the
lookups.
Fixes: 8e4597c627fb ("bpf: Allow using bpf_sk_storage in FENTRY/FEXIT/RAW_TP")
Suggested-by: Martin KaFai Lau <martin.lau@linux.dev>
Signed-off-by: Jared Kangas <jkangas@redhat.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250121142504.1369436-1-jkangas@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Ingo Molnar:
"Fix a potential early boot crash in SEV-SNP guests, where certain
config and build environment combinations can generate absolute
references to symbols in the early boot code"
* tag 'x86-urgent-2025-01-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sev: Disable jump tables in SEV startup code
|
|
Pull NFS client updates from Anna Schumaker:
"New Features:
- Enable using direct IO with localio
- Added localio related tracepoints
Bugfixes:
- Sunrpc fixes for working with a very large cl_tasks list
- Fix a possible buffer overflow in nfs_sysfs_link_rpc_client()
- Fixes for handling reconnections with localio
- Fix how the NFS_FSCACHE kconfig option interacts with NETFS_SUPPORT
- Fix COPY_NOTIFY xdr_buf size calculations
- pNFS/Flexfiles fix for retrying requesting a layout segment for
reads
- Sunrpc fix for retrying on EKEYEXPIRED error when the TGT is
expired
Cleanups:
- Various other nfs & nfsd localio cleanups
- Prepratory patches for async copy improvements that are under
development
- Make OFFLOAD_CANCEL, LAYOUTSTATS, and LAYOUTERR moveable to other
xprts
- Add netns inum and srcaddr to debugfs rpc_xprt info"
* tag 'nfs-for-6.14-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (28 commits)
SUNRPC: do not retry on EKEYEXPIRED when user TGT ticket expired
sunrpc: add netns inum and srcaddr to debugfs rpc_xprt info
pnfs/flexfiles: retry getting layout segment for reads
NFSv4.2: make LAYOUTSTATS and LAYOUTERROR MOVEABLE
NFSv4.2: mark OFFLOAD_CANCEL MOVEABLE
NFSv4.2: fix COPY_NOTIFY xdr buf size calculation
NFS: Rename struct nfs4_offloadcancel_data
NFS: Fix typo in OFFLOAD_CANCEL comment
NFS: CB_OFFLOAD can return NFS4ERR_DELAY
nfs: Make NFS_FSCACHE select NETFS_SUPPORT instead of depending on it
nfs: fix incorrect error handling in LOCALIO
nfs: probe for LOCALIO when v3 client reconnects to server
nfs: probe for LOCALIO when v4 client reconnects to server
nfs/localio: remove redundant code and simplify LOCALIO enablement
nfs_common: add nfs_localio trace events
nfs_common: track all open nfsd_files per LOCALIO nfs_client
nfs_common: rename nfslocalio nfs_uuid_lock to nfs_uuids_lock
nfsd: nfsd_file_acquire_local no longer returns GC'd nfsd_file
nfsd: rename nfsd_serv_ prefixed methods and variables with nfsd_net_
nfsd: update percpu_ref to manage references on nfsd_net
...
|
|
Pull vfio updates from Alex Williamson:
- Extend vfio-pci 8-byte read/write support to include archs defining
CONFIG_GENERIC_IOMAP, such as x86, and remove now extraneous #ifdefs
around 64-bit accessors (Ramesh Thomas)
- Update vfio-pci shadow ROM handling and allow cached ROM from setup
data to be exposed as a functional ROM BAR region when available
(Yunxiang Li)
- Update nvgrace-gpu vfio-pci variant driver for new Grace Blackwell
hardware, conditionalizing the uncached BAR workaround for previous
generation hardware based on the presence of a flag in a new DVSEC
capability, and include a delay during probe for link training to
complete, a new requirement for GB devices (Ankit Agrawal)
* tag 'vfio-v6.14-rc1' of https://github.com/awilliam/linux-vfio:
vfio/nvgrace-gpu: Add GB200 SKU to the devid table
vfio/nvgrace-gpu: Check the HBM training and C2C link status
vfio/nvgrace-gpu: Expose the blackwell device PF BAR1 to the VM
vfio/nvgrace-gpu: Read dvsec register to determine need for uncached resmem
vfio/platform: check the bounds of read/write syscalls
vfio/pci: Expose setup ROM at ROM bar when needed
vfio/pci: Remove shadow ROM specific code paths
vfio/pci: Remove #ifdef iowrite64 and #ifdef ioread64
vfio/pci: Enable iowrite64 and ioread64 for vfio pci
|
|
When retpolines and IBT are both disabled, the compiler is free to use
jump tables to optimize switch instructions. However, these are emitted
by Clang as absolute references into .rodata:
jmp *-0x7dfffe90(,%r9,8)
R_X86_64_32S .rodata+0x170
Given that this code will execute before that address in .rodata has even
been mapped, it is guaranteed to crash a SEV-SNP guest in a way that is
difficult to diagnose.
So disable jump tables when building this code. It would be better if we
could attach this annotation to the __head macro but this appears to be
impossible.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Tested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250127114334.1045857-6-ardb+git@google.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core and debugfs updates from Greg KH:
"Here is the big set of driver core and debugfs updates for 6.14-rc1.
Included in here is a bunch of driver core, PCI, OF, and platform rust
bindings (all acked by the different subsystem maintainers), hence the
merge conflict with the rust tree, and some driver core api updates to
mark things as const, which will also require some fixups due to new
stuff coming in through other trees in this merge window.
There are also a bunch of debugfs updates from Al, and there is at
least one user that does have a regression with these, but Al is
working on tracking down the fix for it. In my use (and everyone
else's linux-next use), it does not seem like a big issue at the
moment.
Here's a short list of the things in here:
- driver core rust bindings for PCI, platform, OF, and some i/o
functions.
We are almost at the "write a real driver in rust" stage now,
depending on what you want to do.
- misc device rust bindings and a sample driver to show how to use
them
- debugfs cleanups in the fs as well as the users of the fs api for
places where drivers got it wrong or were unnecessarily doing
things in complex ways.
- driver core const work, making more of the api take const * for
different parameters to make the rust bindings easier overall.
- other small fixes and updates
All of these have been in linux-next with all of the aforementioned
merge conflicts, and the one debugfs issue, which looks to be resolved
"soon""
* tag 'driver-core-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (95 commits)
rust: device: Use as_char_ptr() to avoid explicit cast
rust: device: Replace CString with CStr in property_present()
devcoredump: Constify 'struct bin_attribute'
devcoredump: Define 'struct bin_attribute' through macro
rust: device: Add property_present()
saner replacement for debugfs_rename()
orangefs-debugfs: don't mess with ->d_name
octeontx2: don't mess with ->d_parent or ->d_parent->d_name
arm_scmi: don't mess with ->d_parent->d_name
slub: don't mess with ->d_name
sof-client-ipc-flood-test: don't mess with ->d_name
qat: don't mess with ->d_name
xhci: don't mess with ->d_iname
mtu3: don't mess wiht ->d_iname
greybus/camera - stop messing with ->d_iname
mediatek: stop messing with ->d_iname
netdevsim: don't embed file_operations into your structs
b43legacy: make use of debugfs_get_aux()
b43: stop embedding struct file_operations into their objects
carl9170: stop embedding file_operations into their objects
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull stop_machine update from Paul McKenney:
"Move a misplaced call to rcu_momentary_eqs() from multi_cpu_stop() to
ensure that interrupts are disabled as required"
* tag 'stop-machine.2025.01.28a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
stop_machine: Fix rcu_momentary_eqs() call in multi_cpu_stop()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull CSD-lock update from Paul McKenney:
"Allow runtime modification of the csd_lock_timeout and
panic_on_ipistall module parameters"
* tag 'csd-lock.2025.01.28a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
locking/csd-lock: make CSD lock debug tunables writable in /sys
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull bootconfig fix from Masami Hiramatsu:
- Fix wrong format specifier: use '%u' for unsigned int
* tag 'bootconfig-fixes-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tools/bootconfig: Fix the wrong format specifier
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver updates from Greg KH:
"Here is the tty/serial driver set of changes for 6.14-rc1. Nothing
major in here, it was delayed a bit due to a regression found in
linux-next which has now been reverted and verified that it is fixed.
Other than the reverts, highlights include:
- 8250 work to get the nbcon mode working (partially reverted)
- altera_jtaguart minor fixes
- fsl_lpuart minor updates
- sh-sci driver minor updatesa
- other tiny driver updates and cleanups
All of these have been in linux-next for a while, and now with no
reports of problems (thanks to the reverts)"
* tag 'tty-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (44 commits)
Revert "serial: 8250: Switch to nbcon console"
Revert "serial: 8250: Revert "drop lockdep annotation from serial8250_clear_IER()""
serial: sh-sci: Increment the runtime usage counter for the earlycon device
serial: sh-sci: Clean sci_ports[0] after at earlycon exit
serial: sh-sci: Do not probe the serial port if its slot in sci_ports[] is in use
serial: sh-sci: Move runtime PM enable to sci_probe_single()
serial: sh-sci: Drop __initdata macro for port_cfg
serial: kgdb_nmi: Remove unused knock code
tty: Permit some TIOCL_SETSEL modes without CAP_SYS_ADMIN
tty: xilinx_uartps: split sysrq handling
serial: 8250: Revert "drop lockdep annotation from serial8250_clear_IER()"
serial: 8250: Switch to nbcon console
serial: 8250: Provide flag for IER toggling for RS485
serial: 8250: Use high-level writing function for FIFO
serial: 8250: Use frame time to determine timeout
serial: 8250: Adjust the timeout for FIFO mode
tty: atmel_serial: Use of_property_present() for non-boolean properties
serial: sc16is7xx: Add polling mode if no IRQ pin is available
dt-bindings: serial: sc16is7xx: Add description for polling mode
tty: serial: atmel: make it selectable for ARCH_LAN969X
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull KVM/arm64 updates from Will Deacon:
"New features:
- Support for non-protected guest in protected mode, achieving near
feature parity with the non-protected mode
- Support for the EL2 timers as part of the ongoing NV support
- Allow control of hardware tracing for nVHE/hVHE
Improvements, fixes and cleanups:
- Massive cleanup of the debug infrastructure, making it a bit less
awkward and definitely easier to maintain. This should pave the way
for further optimisations
- Complete rewrite of pKVM's fixed-feature infrastructure, aligning
it with the rest of KVM and making the code easier to follow
- Large simplification of pKVM's memory protection infrastructure
- Better handling of RES0/RES1 fields for memory-backed system
registers
- Add a workaround for Qualcomm's Snapdragon X CPUs, which suffer
from a pretty nasty timer bug
- Small collection of cleanups and low-impact fixes"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (87 commits)
arm64/sysreg: Get rid of TRFCR_ELx SysregFields
KVM: arm64: nv: Fix doc header layout for timers
KVM: arm64: nv: Apply RESx settings to sysreg reset values
KVM: arm64: nv: Always evaluate HCR_EL2 using sanitising accessors
KVM: arm64: Fix selftests after sysreg field name update
coresight: Pass guest TRFCR value to KVM
KVM: arm64: Support trace filtering for guests
KVM: arm64: coresight: Give TRBE enabled state to KVM
coresight: trbe: Remove redundant disable call
arm64/sysreg/tools: Move TRFCR definitions to sysreg
tools: arm64: Update sysreg.h header files
KVM: arm64: Drop pkvm_mem_transition for host/hyp donations
KVM: arm64: Drop pkvm_mem_transition for host/hyp sharing
KVM: arm64: Drop pkvm_mem_transition for FF-A
KVM: arm64: Explicitly handle BRBE traps as UNDEFINED
KVM: arm64: vgic: Use str_enabled_disabled() in vgic_v3_probe()
arm64: kvm: Introduce nvhe stack size constants
KVM: arm64: Fix nVHE stacktrace VA bits mask
KVM: arm64: Fix FEAT_MTE in pKVM
Documentation: Update the behaviour of "kvm-arm.mode"
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Migrate to the generic rule for built-in DTB
- Disable FIX_EARLYCON_MEM when ARCH_IOREMAP is enabled
- Derive timer max_delta from PRCFG1's timer_bits
- Correct the cacheinfo sharing information
- Add pgprot_nx() implementation
- Add debugfs entries to switch SFB/TSO state
- Change the maximum number of watchpoints
- Some bug fixes and other small changes
* tag 'loongarch-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: Extend the maximum number of watchpoints
LoongArch: Change 8 to 14 for LOONGARCH_MAX_{BRP,WRP}
LoongArch: Add debugfs entries to switch SFB/TSO state
LoongArch: Fix warnings during S3 suspend
LoongArch: Adjust SETUP_SLEEP and SETUP_WAKEUP
LoongArch: Refactor bug_handler() implementation
LoongArch: Add pgprot_nx() implementation
LoongArch: Correct the __switch_to() prototype in comments
LoongArch: Correct the cacheinfo sharing information
LoongArch: Derive timer max_delta from PRCFG1's timer_bits
LoongArch: Disable FIX_EARLYCON_MEM when ARCH_IOREMAP is enabled
LoongArch: Migrate to the generic rule for built-in DTB
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/alarsson/linux-sparc
Pull sparc updates from Andreas Larsson:
- Improve performance for reading /proc/interrupts
- Simplify irq code for sun4v
- Replace zero-length array with flexible array in struct for pci for
sparc64
* tag 'sparc-for-6.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/alarsson/linux-sparc:
sparc/irq: Remove unneeded if check in sun4v_cookie_only_virqs()
sparc/irq: Use str_enabled_disabled() helper function
sparc: replace zero-length array with flexible-array member
sparc/irq: use seq_put_decimal_ull_width() for decimal values
|
|
Use '%u' instead of '%d' for unsigned int.
Link: https://lore.kernel.org/all/20241105011048.201629-1-luoyifan@cmss.chinamobile.com/
Fixes: 973780011106 ("tools/bootconfig: Suppress non-error messages")
Signed-off-by: Luo Yifan <luoyifan@cmss.chinamobile.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this series, there are several major improvements such as folio
conversion by Matthew, speed-up of block truncation, and caching more
dentry pages.
In addition, we implemented a linear dentry search to address recent
unicode regression, and figured out some false alarms that we could
get rid of.
Enhancements:
- foilio conversion in various IO paths
- optimize f2fs_truncate_data_blocks_range()
- cache more dentry pages
- remove unnecessary blk_finish_plug
- procfs: show mtime in segment_bits
Bug fixes:
- introduce linear search for dentries
- don't call block truncation for aliased file
- fix using wrong 'submitted' value in f2fs_write_cache_pages
- fix to do sanity check correctly on i_inline_xattr_size
- avoid trying to get invalid block address
- fix inconsistent dirty state of atomic file"
* tag 'f2fs-for-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (32 commits)
f2fs: fix inconsistent dirty state of atomic file
f2fs: fix to avoid changing 'check only' behaior of recovery
f2fs: Clean up the loop outside of f2fs_invalidate_blocks()
f2fs: procfs: show mtime in segment_bits
f2fs: fix to avoid return invalid mtime from f2fs_get_section_mtime()
f2fs: Fix format specifier in sanity_check_inode()
f2fs: avoid trying to get invalid block address
f2fs: fix to do sanity check correctly on i_inline_xattr_size
f2fs: remove blk_finish_plug
f2fs: Optimize f2fs_truncate_data_blocks_range()
f2fs: fix using wrong 'submitted' value in f2fs_write_cache_pages
f2fs: add parameter @len to f2fs_invalidate_blocks()
f2fs: update_sit_entry_for_release() supports consecutive blocks.
f2fs: introduce update_sit_entry_for_release/alloc()
f2fs: don't call block truncation for aliased file
f2fs: Introduce linear search for dentries
f2fs: add parameter @len to f2fs_invalidate_internal_cache()
f2fs: expand f2fs_invalidate_compress_page() to f2fs_invalidate_compress_pages_range()
f2fs: ensure that node info flags are always initialized
f2fs: The GC triggered by ioctl also needs to mark the segno as victim
...
|
|
Pull nfsd updates from Chuck Lever:
"Jeff Layton contributed an implementation of NFSv4.2+ attribute
delegation, as described here:
https://www.ietf.org/archive/id/draft-ietf-nfsv4-delstid-08.html
This interoperates with similar functionality introduced into the
Linux NFS client in v6.11. An attribute delegation permits an NFS
client to manage a file's mtime, rather than flushing dirty data to
the NFS server so that the file's mtime reflects the last write, which
is considerably slower.
Neil Brown contributed dynamic NFSv4.1 session slot table resizing.
This facility enables NFSD to increase or decrease the number of slots
per NFS session depending on server memory availability. More session
slots means greater parallelism.
Chuck Lever fixed a long-standing latent bug where NFSv4 COMPOUND
encoding screws up when crossing a page boundary in the encoding
buffer. This is a zero-day bug, but hitting it is rare and depends on
the NFS client implementation. The Linux NFS client does not happen to
trigger this issue.
A variety of bug fixes and other incremental improvements fill out the
list of commits in this release. Great thanks to all contributors,
reviewers, testers, and bug reporters who participated during this
development cycle"
* tag 'nfsd-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (42 commits)
sunrpc: Remove gss_{de,en}crypt_xdr_buf deadcode
sunrpc: Remove gss_generic_token deadcode
sunrpc: Remove unused xprt_iter_get_xprt
Revert "SUNRPC: Reduce thread wake-up rate when receiving large RPC messages"
nfsd: implement OPEN_ARGS_SHARE_ACCESS_WANT_OPEN_XOR_DELEGATION
nfsd: handle delegated timestamps in SETATTR
nfsd: add support for delegated timestamps
nfsd: rework NFS4_SHARE_WANT_* flag handling
nfsd: add support for FATTR4_OPEN_ARGUMENTS
nfsd: prepare delegation code for handing out *_ATTRS_DELEG delegations
nfsd: rename NFS4_SHARE_WANT_* constants to OPEN4_SHARE_ACCESS_WANT_*
nfsd: switch to autogenerated definitions for open_delegation_type4
nfs_common: make include/linux/nfs4.h include generated nfs4_1.h
nfsd: fix handling of delegated change attr in CB_GETATTR
SUNRPC: Document validity guarantees of the pointer returned by reserve_space
NFSD: Insulate nfsd4_encode_fattr4() from page boundaries in the encode buffer
NFSD: Insulate nfsd4_encode_secinfo() from page boundaries in the encode buffer
NFSD: Refactor nfsd4_do_encode_secinfo() again
NFSD: Insulate nfsd4_encode_readlink() from page boundaries in the encode buffer
NFSD: Insulate nfsd4_encode_read_plus_data() from page boundaries in the encode buffer
...
|
|
Pull drm fixes from Simona Vetter:
"cgroup:
- fix Koncfig fallout from new dmem controller
Driver Changes:
- v3d NULL pointer regression fix in fence signalling race
- virtio: uaf in dma_buf free path
- xlnx: fix kerneldoc
- bochs: fix double-free on driver removal
- zynqmp: add missing locking to DP bridge driver
- amdgpu fixes all over:
- documentation, display, sriov, various hw block drivers
- use drm/sched helper
- mark some debug module options as unsafe
- amdkfd: mark some debug module options as unsafe, trap handler
updates, fix partial migration handling
DRM core:
- fix fbdev Kconfig select rules, improve tiled-based display
support"
* tag 'drm-next-2025-01-27' of https://gitlab.freedesktop.org/drm/kernel: (40 commits)
drm/amd/display: Optimize cursor position updates
drm/amd/display: Add hubp cache reset when powergating
drm/amd/amdgpu: Enable scratch data dump for mes 12
drm/amd: Clarify kdoc for amdgpu.gttsize
drm/amd/amdgpu: Prevent null pointer dereference in GPU bandwidth calculation
drm/amd/display: Fix error pointers in amdgpu_dm_crtc_mem_type_changed
drm/amdgpu: fix ring timeout issue in gfx10 sr-iov environment
drm/amd/pm: Fix smu v13.0.6 caps initialization
drm/amd/pm: Refactor SMU 13.0.6 SDMA reset firmware version checks
revert "drm/amdgpu/pm: add definition PPSMC_MSG_ResetSDMA2"
revert "drm/amdgpu/pm: Implement SDMA queue reset for different asic"
drm/amd/pm: Add capability flags for SMU v13.0.6
drm/amd/display: fix SUBVP DC_DEBUG_MASK documentation
drm/amd/display: fix CEC DC_DEBUG_MASK documentation
drm/amdgpu: fix the PCIe lanes reporting in the INFO IOCTL
drm/amdgpu: cache gpu pcie link width
drm/amd/display: mark static functions noinline_for_stack
drm/amdkfd: Clear MODE.VSKIP in gfx9 trap handler
drm/amdgpu: Refine ip detection log message
drm/amdgpu: Add handler for SDMA context empty
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mikulas Patocka:
- fix a spelling error in dm-raid
- change kzalloc to kcalloc
- remove useless test in alloc_multiple_bios
- disable REQ_NOWAIT for flushes
- dm-transaction-manager: use red-black trees instead of linear lists
- atomic writes support for dm-linear, dm-stripe and dm-mirror
- dm-crypt: code cleanups and two bugfixes
* tag 'for-6.14/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm-crypt: track tag_offset in convert_context
dm-crypt: don't initialize cc_sector again
dm-crypt: don't update io->sector after kcryptd_crypt_write_io_submit()
dm-crypt: use bi_sector in bio when initialize integrity seed
dm-crypt: fully initialize clone->bi_iter in crypt_alloc_buffer()
dm-crypt: set atomic as false when calling crypt_convert() in kworker
dm-mirror: Support atomic writes
dm-io: Warn on creating multiple atomic write bios for a region
dm-stripe: Enable atomic writes
dm-linear: Enable atomic writes
dm: Ensure cloned bio is same length for atomic write
dm-table: atomic writes support
dm-transaction-manager: use red-black trees instead of linear lists
dm: disable REQ_NOWAIT for flushes
dm: remove useless test in alloc_multiple_bios
dm: change kzalloc to kcalloc
dm raid: fix spelling errors in raid_ctr()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull Char/Misc/IIO driver updates from Greg KH:
"Here is the "big" set of char/misc/iio and other smaller driver
subsystem updates for 6.14-rc1. Loads of different things in here this
development cycle, highlights are:
- ntsync "driver" to handle Windows locking types enabling Wine to
work much better on many workloads (i.e. games). The driver
framework was in 6.13, but now it's enabled and fully working
properly. Should make many SteamOS users happy. Even comes with
tests!
- Large IIO driver updates and bugfixes
- FPGA driver updates
- Coresight driver updates
- MHI driver updates
- PPS driver updatesa
- const bin_attribute reworking for many drivers
- binder driver updates
- smaller driver updates and fixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (311 commits)
ntsync: Fix reference leaks in the remaining create ioctls.
spmi: hisi-spmi-controller: Drop duplicated OF node assignment in spmi_controller_probe()
spmi: Set fwnode for spmi devices
ntsync: fix a file reference leak in drivers/misc/ntsync.c
scripts/tags.sh: Don't tag usages of DECLARE_BITMAP
dt-bindings: interconnect: qcom,msm8998-bwmon: Add SM8750 CPU BWMONs
dt-bindings: interconnect: OSM L3: Document sm8650 OSM L3 compatible
dt-bindings: interconnect: qcom-bwmon: Document QCS615 bwmon compatibles
interconnect: sm8750: Add missing const to static qcom_icc_desc
memstick: core: fix kernel-doc notation
intel_th: core: fix kernel-doc warnings
binder: log transaction code on failure
iio: dac: ad3552r-hs: clear reset status flag
iio: dac: ad3552r-common: fix ad3541/2r ranges
iio: chemical: bme680: Fix uninitialized variable in __bme680_read_raw()
misc: fastrpc: Fix copy buffer page size
misc: fastrpc: Fix registered buffer page address
misc: fastrpc: Deregister device nodes properly in error scenarios
nvmem: core: improve range check for nvmem_cell_write()
nvmem: qcom-spmi-sdam: Set size in struct nvmem_config
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver updates from Greg KH:
"Here's the pretty small staging driver tree update for 6.14-rc1. Not
much happened this development cycle:
- deleted some unused ioctl code from the rtl8723bs driver
- gpib driver cleanups and fixes
- other tiny minor coding style fixes.
All of these have been in linux-next for a while with no reported
issues"
* tag 'staging-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (38 commits)
staging: gpib: Agilent usb code cleanup
staging: gpib: Fix NULL pointer dereference in detach
staging: gpib: Fix inadvertent negative shift
staging: gpib: fix prefixing 0x with decimal output
staging: gpib: Use C99 syntax and make static
staging: gpib: Avoid plain integers as NULL pointers
staging: gpib: Use __user for user space pointers
staging: gpib: Use __iomem attribute for io addresses
staging: gpib: Add missing mutex unlock in ni usb driver
staging: gpib: Add missing mutex unlock in agilent usb driver
staging: gpib: Modernize gpib_interface_t initialization and make static
staging: gpib: Remove commented-out debug code
staging: rtl8723bs: Remove ioctl interface
staging: gpib: tnt4882: Handle gpib_register_driver() errors
staging: gpib: pc2: Handle gpib_register_driver() errors
staging: gpib: ni_usb: Handle gpib_register_driver() errors
staging: gpib: lpvo_usb: Return error value from gpib_register_driver()
staging: gpib: ines: Handle gpib_register_driver() errors
staging: gpib: hp_82341: Handle gpib_register_driver() errors
staging: gpib: hp_82335: Return error value from gpib_register_driver()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt driver updates from Greg KH:
"Here is the USB and Thunderbolt driver updates for 6.14-rc1. Nothing
huge in here, just lots of new hardware support and updates for
existing drivers. Changes here are:
- big gadget f_tcm driver update
- other gadget driver updates and fixes
- thunderbolt driver updates for new hardware and capabilities and
lots more debugging functionality to handle it when things aren't
working well.
- xhci driver updates
- new USB-serial device updates
- typec driver updates, including a chrome platform driver (acked by
the subsystem maintainers)
- other small driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (123 commits)
usb: hcd: Bump local buffer size in rh_string()
Revert "usb: gadget: u_serial: Disable ep before setting port to null to fix the crash caused by port being null"
usb: typec: tcpci: Prevent Sink disconnection before vPpsShutdown in SPR PPS
usb: xhci: tegra: Fix OF boolean read warning
usb: host: xhci-plat: add support compatible ID PNP0D15
usb: typec: ucsi: Add a macro definition for UCSI v1.0
usb: dwc3: core: Defer the probe until USB power supply ready
usbip: Correct format specifier for seqnum from %d to %u
usbip: Fix seqnum sign extension issue in vhci_tx_urb
dt-bindings: usb: snps,dwc3: Split core description
usb: quirks: Add NO_LPM quirk for TOSHIBA TransMemory-Mx device
usb: dwc3: gadget: Reinitiate stream for all host NoStream behavior
USB: Use str_enable_disable-like helpers
USB: gadget: Use str_enable_disable-like helpers
USB: phy: Use str_enable_disable-like helpers
USB: typec: Use str_enable_disable-like helpers
USB: host: Use str_enable_disable-like helpers
USB: Replace own str_plural with common one
USB: serial: quatech2: fix null-ptr-deref in qt2_process_read_urb()
usb: phy: Remove API devm_usb_put_phy()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm fixes from Uwe Kleine-König:
"Two fixes.
Conor Dooley found and fixed a problem in the pwm-microchip-core
driver that existed since the driver's birth in v6.5-rc1. It's about a
corner case that only happens if two pwm devices of the same chip are
set to the same long period.
The other problem is about the new pwm API that currently is only
supported by two hardware drivers. The fix prevents a NULL pointer
exception if one of the new functions is called for a pwm device with
a driver that only provides the old callbacks"
* tag 'pwm/for-6.14-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
pwm: Ensure callbacks exist before calling them
pwm: microchip-core: fix incorrect comparison with max period
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"Power-supply core:
- introduce power supply extensions, which allows adding properties
to a power supply device from a separate driver. This will be used
initially to extend the generic ACPI charger/battery driver with
vendor extensions for charge thresholds.
- convert all drivers from power_supply_for_each_device to new
power_supply_for_each_psy(), which avoids lots of casting being
done in the drivers.
- avoid LED trigger like values in uevent for
POWER_SUPPLY_PROP_CHARGE_BEHAVIOUR
- introduce POWER_SUPPLY_PROP_CHARGE_TYPES, which is similar to the
POWER_SUPPLY_PROP_CHARGE_TYPE property, but also lists the
available options on the specific platform
Power-supply drivers
- dell-laptop: use new power_supply_charge_types_show/_parse helpers
- stc3117: new driver for equally named fuel gauge chip
- bq24190: add support for new POWER_SUPPLY_PROP_CHARGE_TYPES
- bq24190: add BQ24297 support
- bq27xxx: add voltage min design for bq27000/bq27200
- cros_charge-control: convert to new power supply extension API
- multiple drivers: constify 'struct bin_attribute'
- ds2782: convert to device managed resources
- max1720x: add charge full property
- max1720x: support extra thermistor temperatures
- max17042: add max77705 support
- ip5xxx-power: add support for IP5306
- ltc4162-l-charger: add ltc4162-f/s and ltc4015 support
- gpio-charger: support for default charge current limit
- misc small cleanups and fixes
Reset drivers:
- at91-poweroff: add sam9x7 support"
* tag 'for-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (77 commits)
power: supply: max1720x: add support for reading internal and thermistor temperatures
power: supply: ltc4162l: Use GENMASK macro in bitmask operation
power: supply: max17042: add max77705 fuel gauge support
dt-bindings: power: supply: max17042: add max77705 support
power: supply: add undervoltage health status property
power: supply: max17042: add platform driver variant
power: supply: max17042: make interrupt shared
power: reset: keystone: Use syscon_regmap_lookup_by_phandle_args
power: supply: Use str_enable_disable-like helpers
platform/x86: dell-laptop: Use power_supply_charge_types_show/_parse() helpers
power: supply: bq2415x_charger: Immediately reschedule delayed work on notifier events
power: supply: Add STC3117 fuel gauge unit driver
dt-bindings: power: supply: Add STC3117 Fuel Gauge
power: supply: ug3105_battery: Let the core handle POWER_SUPPLY_PROP_TECHNOLOGY
power: supply: gpio-charger: add support for default charge current limit
dt-bindings: power: supply: gpio-charger: add support for default charge current limit
power: supply: Use power_supply_external_power_changed() in __power_supply_changed_work()
power: supply: core: fix build of extension sysfs group if CONFIG_SYSFS=n
power: supply: bq2415x_charger: report charging state changes to userspace
bq27xxx: add voltage min design for bq27000 and bq27200
...
|
|
Pull virtio updates from Michael Tsirkin:
"A small number of improvements all over the place:
- vdpa/octeon support for multiple interrupts
- virtio-pci support for error recovery
- vp_vdpa support for notification with data
- vhost/net fix to set num_buffers for spec compliance
- virtio-mem now works with kdump on s390
And small cleanups all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (23 commits)
virtio_blk: Add support for transport error recovery
virtio_pci: Add support for PCIe Function Level Reset
vhost/net: Set num_buffers for virtio 1.0
vdpa/octeon_ep: read vendor-specific PCI capability
virtio-pci: define type and header for PCI vendor data
vdpa/octeon_ep: handle device config change events
vdpa/octeon_ep: enable support for multiple interrupts per device
vdpa: solidrun: Replace deprecated PCI functions
s390/kdump: virtio-mem kdump support (CONFIG_PROC_VMCORE_DEVICE_RAM)
virtio-mem: support CONFIG_PROC_VMCORE_DEVICE_RAM
virtio-mem: remember usable region size
virtio-mem: mark device ready before registering callbacks in kdump mode
fs/proc/vmcore: introduce PROC_VMCORE_DEVICE_RAM to detect device RAM ranges in 2nd kernel
fs/proc/vmcore: factor out freeing a list of vmcore ranges
fs/proc/vmcore: factor out allocating a vmcore range and adding it to a list
fs/proc/vmcore: move vmcore definitions out of kcore.h
fs/proc/vmcore: prefix all pr_* with "vmcore:"
fs/proc/vmcore: disallow vmcore modifications while the vmcore is open
fs/proc/vmcore: replace vmcoredd_mutex by vmcore_mutex
fs/proc/vmcore: convert vmcore_cb_lock into vmcore_mutex
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Thomas Bogendoerfer:
"Cleanups and fixes"
* tag 'mips_6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: pci-legacy: Override pci_address_to_pio
MIPS: Loongson64: env: Use str_on_off() helper in prom_lefi_init_env()
MIPS: migrate to generic rule for built-in DTBs
mips: fix shmctl/semctl/msgctl syscall for o32
mips/math-emu: fix emulation of the prefx instruction
MIPS: Loongson: Add comments for interface_info
MIPS: Loongson64: remove ROM Size unit in boardinfo
MIPS: traps: Use str_enabled_disabled() in parity_protection_init()
MIPS: ftrace: Declare ftrace_get_parent_ra_addr() as static
Revert "MIPS: csrc-r4k: Select HAVE_UNSTABLE_SCHED_CLOCK if SMP && 64BIT"
MIPS: Fix the wrong format specifier
MIPS: Add a blank line after __HEAD
MIPS: kernel: Rename read/write_c0_ecc to read/writec0_errctl
|
|
Pull ARM updates from Russell King:
- fix typos in vfpmodule.c
- drop obsolete VFP accessor fallback for old assemblers
- add cache line identifier register accessor functions
- add cacheinfo support
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
ARM: 9440/1: cacheinfo fix format field mask
ARM: 9433/2: implement cacheinfo support
ARM: 9432/2: add CLIDR accessor functions
ARM: 9438/1: assembler: Drop obsolete VFP accessor fallback
ARM: 9437/1: vfp: Fix typographical errors in vfpmodule.c
|
|
NVIDIA is productizing the new Grace Blackwell superchip
SKU bearing device ID 0x2941.
Add the SKU devid to nvgrace_gpu_vfio_pci_table.
CC: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Ankit Agrawal <ankita@nvidia.com>
Link: https://lore.kernel.org/r/20250124183102.3976-5-ankita@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
In contrast to Grace Hopper systems, the HBM training has been moved
out of the UEFI on the Grace Blackwell systems. This reduces the system
bootup time significantly.
The onus of checking whether the HBM training has completed thus falls
on the module.
The HBM training status can be determined from a BAR0 register.
Similarly, another BAR0 register exposes the status of the CPU-GPU
chip-to-chip (C2C) cache coherent interconnect.
Based on testing, 30s is determined to be sufficient to ensure
initialization completion on all the Grace based systems. Thus poll
these register and check for 30s. If the HBM training is not complete
or if the C2C link is not ready, fail the probe.
While the time is not required on Grace Hopper systems, it is
beneficial to make the check to ensure the device is in an
expected state. Hence keeping it generalized to both the generations.
Ensure that the BAR0 is enabled before accessing the registers.
CC: Alex Williamson <alex.williamson@redhat.com>
CC: Kevin Tian <kevin.tian@intel.com>
CC: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Ankit Agrawal <ankita@nvidia.com>
Link: https://lore.kernel.org/r/20250124183102.3976-4-ankita@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
There is a HW defect on Grace Hopper (GH) to support the
Multi-Instance GPU (MIG) feature [1] that necessiated the presence
of a 1G region carved out from the device memory and mapped as
uncached. The 1G region is shown as a fake BAR (comprising region 2 and 3)
to workaround the issue.
The Grace Blackwell systems (GB) differ from GH systems in the following
aspects:
1. The aforementioned HW defect is fixed on GB systems.
2. There is a usable BAR1 (region 2 and 3) on GB systems for the
GPUdirect RDMA feature [2].
This patch accommodate those GB changes by showing the 64b physical
device BAR1 (region2 and 3) to the VM instead of the fake one. This
takes care of both the differences.
Moreover, the entire device memory is exposed on GB as cacheable to
the VM as there is no carveout required.
Link: https://www.nvidia.com/en-in/technologies/multi-instance-gpu/ [1]
Link: https://docs.nvidia.com/cuda/gpudirect-rdma/ [2]
Cc: Kevin Tian <kevin.tian@intel.com>
CC: Jason Gunthorpe <jgg@nvidia.com>
Suggested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Ankit Agrawal <ankita@nvidia.com>
Link: https://lore.kernel.org/r/20250124183102.3976-3-ankita@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
NVIDIA's recently introduced Grace Blackwell (GB) Superchip is a
continuation with the Grace Hopper (GH) superchip that provides a
cache coherent access to CPU and GPU to each other's memory with
an internal proprietary chip-to-chip cache coherent interconnect.
There is a HW defect on GH systems to support the Multi-Instance
GPU (MIG) feature [1] that necessiated the presence of a 1G region
with uncached mapping carved out from the device memory. The 1G
region is shown as a fake BAR (comprising region 2 and 3) to
workaround the issue. This is fixed on the GB systems.
The presence of the fix for the HW defect is communicated by the
device firmware through the DVSEC PCI config register with ID 3.
The module reads this to take a different codepath on GB vs GH.
Scan through the DVSEC registers to identify the correct one and use
it to determine the presence of the fix. Save the value in the device's
nvgrace_gpu_pci_core_device structure.
Link: https://www.nvidia.com/en-in/technologies/multi-instance-gpu/ [1]
CC: Jason Gunthorpe <jgg@nvidia.com>
CC: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Ankit Agrawal <ankita@nvidia.com>
Link: https://lore.kernel.org/r/20250124183102.3976-2-ankita@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Pull m68knommu update from Greg Ungerer:
"Just a single fix to correct the clock rate defined for the internal
timer hardware blocks of the ColdFire 5441x family of SoC devices"
* tag 'm68knommu-for-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68k: coldfire: Use proper clock rate for timers
|
|
Pull xtensa updates from Max Filippov:
- a few one-liner cleanups
* tag 'xtensa-20250126' of https://github.com/jcmvbkbc/linux-xtensa:
xtensa/simdisk: Use str_write_read() helper in simdisk_transfer()
xtensa: Remove zero-length alignment array
xtensa: annotate dtb_start variable as static __initdata
|
|
Add support for proper cleanup and re-initialization of virtio-blk devices
during transport reset error recovery flow.
This enhancement includes:
- Pre-reset handler (reset_prepare) to perform device-specific cleanup
- Post-reset handler (reset_done) to re-initialize the device
These changes allow the device to recover from various reset scenarios,
ensuring proper functionality after a reset event occurs.
Without this implementation, the device cannot properly recover from
resets, potentially leading to undefined behavior or device malfunction.
This feature has been tested using PCI transport with Function Level
Reset (FLR) as an example reset mechanism. The reset can be triggered
manually via sysfs (echo 1 > /sys/bus/pci/devices/$PCI_ADDR/reset).
Signed-off-by: Israel Rukshin <israelr@nvidia.com>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Message-Id: <1732690652-3065-3-git-send-email-israelr@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Implement support for Function Level Reset (FLR) in virtio_pci devices.
This change adds reset_prepare and reset_done callbacks, allowing
drivers to properly handle FLR operations.
Without this patch, performing and recovering from an FLR is not possible
for virtio_pci devices. This implementation ensures proper FLR handling
and recovery for both physical and virtual functions.
The device reset can be triggered in case of error or manually via
sysfs:
echo 1 > /sys/bus/pci/devices/$PCI_ADDR/reset
Signed-off-by: Israel Rukshin <israelr@nvidia.com>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Message-Id: <1732690652-3065-2-git-send-email-israelr@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The specification says the device MUST set num_buffers to 1 if
VIRTIO_NET_F_MRG_RXBUF has not been negotiated.
Fixes: 41e3e42108bc ("vhost/net: enable virtio 1.0")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240915-v1-v1-1-f10d2cb5e759@daynix.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
