summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-01-10Blackfin: bf561-ezkit: add SMP defconfigMike Frysinger
Since the SMP code paths tend to compile fail a lot, start a SMP defconfig so our nightly build tools will automatically test it. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10Blackfin: bf533: convert boards to gpio frameworkMike Frysinger
We don't want people banging on MMRs directly. As for the ip0x board, it shouldn't need to muck with the CS pin directly as the Blackfin SPI bus master driver takes care of driving this. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10Blackfin: push gpio (port) defines into common headersMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10Blackfin: bf54x: drop unused legacy MMR namesMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10Blackfin: dma: constify MMR pointer arrayMike Frysinger
The array of pointers is never written, so constify it. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10Blackfin: standardize DMAC traffic control MMRs & MDMA MMRsMike Frysinger
Use the same naming convention for DMA traffic MMRs (most were legacy anyways) so we can avoid useless ifdef trees. Same goes for MDMA names -- this actually allows us to undo a bunch of ifdef redirects that existed for this purpose alone. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10Blackfin: bfin_dma.h: start a header for DMA MMR layoutMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10Blackfin: switch to asm-generic/io.hMike Frysinger
Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10asm-generic/io.h: add reads[bwl]/writes[bwl] helpersMike Frysinger
A bunch of arches define reads[bwl]/writes[bwl] helpers for accessing memory mapped registers. Since the Blackfin ones aren't specific to Blackfin code, move them to the common asm-generic/io.h for people. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10net/irda: bfin_sir: back out transitional definesMike Frysinger
Now that the common header is sane, we can drop the transitional cruft. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10Blackfin: bfin_serial.h: unify heavily duplicated serial codeMike Frysinger
Each Blackfin port has been duplicating UART structures and defines when there really is no need for it. So start a new bfin_serial.h header to unify all these pieces and give ourselves a fresh start. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10net/irda: bfin_sir: pull in serial headers for definesMike Frysinger
We're in the process of cleaning up the global Blackfin namespace, so the bfin_sir driver needs to pull in the serial header explicitly now. This does add a little transitional cruft to keep things compiling, but a follow up patch in this series will cull that. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10Blackfin: musb-boards: push clkin value to platform resourcesBob Liu
In order to not touch the driver file for different xtal usage, push the clkin value to board file and calculate the register value instead of hardcoding it. Signed-off-by: Bob Liu <lliubbo@gmail.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10Blackfin: SMP: fix hotplug building after irq header shuffleGraf Yang
Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10ASoC: RX1950: Enable Mic Jack during glue driver initVasily Khoruzhick
Enable Mic Jack during glue driver init, otherwise capture will not work. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Acked-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-10ASoC: Taint the kernel if debugfs is used to write directly to CODECsMark Brown
Since direct register writes may confuse the drivers and are supposed to be used only in diagnostic situations discourage their use in production by tainting the kernel when we do a write. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-01-10ASoC: SAMSUNG: Move PCM specific definitions into pcm.cSeungwhan Youn
This patch moves PCM specific definitions, they doesn't need to be shared, into 'pcm.c' from 'pcm.h'. Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> Acked-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-10ASoC: SAMSUNG: Clean-up DMA header fileSeungwhan Youn
This patch moves DMA specific definitions, they doesn't need to be shared, into 'dma.c' from 'dma.h'. And remove unnecessery definitions on 'dma.h'. Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> Acked-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-10ASoC: SAMSUNG: Remove AC97 header fileSeungwhan Youn
This patch moves AC97 specific definitions, they doesn't need to be shared, into 'ac97.c' from 'ac97.h'. This patch also remove header file, 'ac97.h', and remove includes on machine drivers. Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> Acked-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-10ASoC: mid-x86 - remove the flag in makefileVinod Koul
previous commit e62255f2adf2 introduced DDEBUG flag in Makefile This causes all debug statemenets to be ON. This patch removes this flag Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Harsha Priya <priya.harsha@intel.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-10ASoC: sst platform - fix the style inconsistencyVinod Koul
this patch fixes the style inconsistency by removing empty space in MODULE_ALIAS also removes a redundant return statement Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Harsha Priya <priya.harsha@intel.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-10ASoC: sn95031 fix the code style and format inconsistenciesVinod Koul
this patch fixes inconsistencies commented by Mark. This also fixes few other style things in audio_map & header file Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Harsha Priya <priya.harsha@intel.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-10ALSA: Don't leak in sound/core/oss/pcm_oss.c::snd_pcm_hw_param_near()Jesper Juhl
snd_pcm_hw_param_near() will leak the memory allocated to 'save' if the call to snd_pcm_hw_param_max() returns less than zero. This patch makes sure we never leak. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-10ALSA: hda: Use vostro model quirk for Dell Vostro 1014Daniel T Chen
BugLink: https://bugtrack.alsa-project.org/alsa-bug/view.php?id=5184 A user reported on the alsa-devel mailing list that he needs to use the vostro model quirk to have audible playback, so apply it for his PCI SSID. Reported-and-tested-by: Fernando Lemos <fernandotcl@gmail.com> Cc: <stable@kernel.org> Signed-off-by: Daniel T Chen <crimsun@ubuntu.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-10ALSA: HDA: Add Lenovo vendor quirk for Conexant 205xxDavid Henningsson
BugLink: http://bugs.launchpad.net/bugs/689036 Many new Lenovos need the ideapad quirk. Also, since the auto parser for this chip is far from optimal, the regression risk is low (although not zero). Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-10ALSA: HDA: Fix volume control indices for Mics (Realtek)David Henningsson
If more than one mic is present with different locations, e g "Front Mic" and "Rear Mic", they can use the same index (0), since their names are different. Previous behavior was to have "Front Mic" as index 1, causing it to be ignored by e g PulseAudio. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-10ALSA: HDA: Rename "Mic Boost" to "Mic Boost Volume"David Henningsson
BugLink: http://bugs.launchpad.net/bugs/697240 If the "Volume" suffix is not given, alsa-lib gets confused and loses the dB information at the simple element level. Boosts generally affects both playback and capture, as they are applied early in the chain. Hence no "Playback" or "Capture" in the suffix. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-10ALSA: HDA: Add internal mic for IDT 92HD88BDavid Henningsson
BugLink: http://bugs.launchpad.net/bugs/696493 According to datasheet (and real-world testing), IDT 92HD88B can have internal mics at NID 0x11 and 0x20, so enable them accordingly. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-10Merge branch 'fix/hda' into topic/hdaTakashi Iwai
2011-01-10OMAP: DSS2: Introduce omap_channel as an omap_dss_device parameter, add new ↵Sumit Semwal
overlay manager. A panel connects to one of the overlay managers of DSS through some interface block. On OMAP4, specifying the type of the display is not sufficient to conclude which manager the panel should be connected to. Hence, a new member 'channel' is introduced in omap_dss_device structure to determine which manager the panel uses. The dss_recheck_connections() called in dss_driver_probe() uses this channel parameter to set the correct manager to the corresponding omap_dss_device. The channel parameter is used only once to ensure the correct managers are set for each panel. The parameter dssdev->manager->id will take care of ensuring that the panel and then the interface driver configures the correct DISPC channel. Also, add a new Overlay Manager in manager.c, make other changes needed for LCD2 channel. Signed-off-by: Sumit Semwal <sumit.semwal@ti.com> Signed-off-by: Mukund Mittal <mmittal@ti.com> Signed-off-by: Samreen <samreen@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2011-01-10OMAP: DSS2: Use dss_features to handle DISPC bits removed on OMAP4Archit Taneja
DISPC_CONFIG bits LCDENABLEPOL, LCDENABLESIGNAL, PCKFREEENABLE and FUNCGATED have been removed from OMAP4, use dss_features to handle them correctly. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2011-01-10OMAP: DSS2: LCD2 Channel Changes for DISPCSumit Semwal
DISPC functions are modified in order to work when the manager is LCD2. This includes: Adding new IRQs specific to LCD2 and their handling. Provide dumps of the new manager's registers. Provide dumps of the new manager's clocks. Checks for channel for registers DISPC_CONTROL2 and DISPC_CONFIG2 which can't be parametrized. Signed-off-by: Sumit Semwal <sumit.semwal@ti.com> Signed-off-by: Mukund Mittal <mmittal@ti.com> Signed-off-by: Samreen <samreen@ti.com> Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2011-01-10OMAP: DSS2: Change remaining DISPC functions for new omap_channel argumentSumit Semwal
The following dispc functions are also changed to incorporate channel as an argument: -dispc_lclk_rate() -dispc_pclk_rate() -dispc_set_pol_freq() -dispc_set_clock_div() -dispc_get_clock_div() Signed-off-by: Sumit Semwal <sumit.semwal@ti.com> Signed-off-by: Mukund Mittal <mmittal@ti.com> Signed-off-by: Samreen <samreen@ti.com> Signed-off-by: Archit Taneja <archit@ti.com> [tomi.valkeinen@nokia.com: fixed trivial compile error] Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2011-01-10OMAP: DSS2: Introduce omap_channel argument to DISPC functions used by ↵Sumit Semwal
interface drivers The interface drivers (dsi.c, sdi.c etc) need to call dispc functions with dssdev->manager->id as a parameter to specify the DISPC channel which they want to configure/use, this is required as the same functions are now used to configure dispc registers of different channels. The following dispc functions are changed to incorporate channel as an argument: -dispc_enable_fifohandcheck() -dispc_set_lcd_size() -dispc_set_parallel_interface_mode() -dispc_set_tft_data_lines() -dispc_set_lcd_display_type() -dispc_set_lcd_timings() Signed-off-by: Sumit Semwal <sumit.semwal@ti.com> Signed-off-by: Mukund Mittal <mmittal@ti.com> Signed-off-by: Samreen <samreen@ti.com> Signed-off-by: Archit Taneja <archit@ti.com> [tomi.valkeinen@nokia.com: fixed trivial compile error] Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2011-01-10OMAP: DSS2: Represent DISPC register defines with channel as parameterSumit Semwal
On OMAP4, we have a new DISPC channel for Overlay Manager LCD2. There is a set of regsiters for LCD2 channel similar to the existing LCD channel, like DISPC_CONTROL2, DISPC_DIVISOR2, DISPC_CONFIG2 and so on. Introduce new enum members for LCD2 Channel and corresponding Overlay Manager in display.h. Represent the following DISPC register defines with channel as a parameter to differentiate between LCD and LCD2 registers (and also DIGIT in some cases): DISPC_DEFAULT_COLOR, DISPC_TRANS_COLOR, DISPC_TIMING_H, DISPC_TIMING_V, DISPC_POL_FREQ, DISPC_DIVISOR, DISPC_SIZE_LCD, DISPC_DATA_CYCLEk, DISPC_CPR_COEF_R, DISPC_CPR_COEF_G and DISPC_CPR_COEF_B This parametrization helps in reducing the number of register defines for DISPC. Replace the existing reads/writes to these registers in this new way. Also, Introduce defines for registers DISPC_CONTROL2 and DISPC_CONFIG2 which are used exclusively for LCD2 channel. Signed-off-by: Sumit Semwal <sumit.semwal@ti.com> Signed-off-by: Mukund Mittal <mmittal@ti.com> Signed-off-by: Samreen <samreen@ti.com> Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2011-01-10OMAP: DSS2: Add dss_features for omap4 and overlay manager related featuresArchit Taneja
Initialize a dss_features struct for omap4. Add support for LCD2 manager by introducing a new member in dss_feat_id. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2011-01-10OMAP: DSS2: Clean up DISPC color mode validation checksArchit Taneja
The supported set of color modes varies for different DISPC pipelines(plane) and omap version. This makes the checks for validation of a color mode more complicated as new omap versions are added. A dss_feature function is created which tells if a color_mode is supported for a plane on the current omap revision. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2011-01-10OMAP: DSS2: Add back authors of panel-generic.c based driversBryan Wu
Signed-off-by: Bryan Wu <bryan.wu@canonical.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2011-01-10OMAP: DSS2: remove generic DPI panel driver duplicated panel driversBryan Wu
Still keep sharp_ls_panel driver, because it contains blacklight control driver. Signed-off-by: Bryan Wu <bryan.wu@canonical.com> Acked-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2011-01-10OMAP: use generic DPI panel driver in board filesBryan Wu
Still keep sharp_ls_panel, since the sharp_ls_panel driver contains blacklight control driver code which will be moved out later. Then we can use generic DPI driver for sharp_ls_panel. Signed-off-by: Bryan Wu <bryan.wu@canonical.com> Acked-by: Archit Taneja <archit@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2011-01-10OMAP: DSS2: Add generic DPI panel display driverBryan Wu
Generic DPI panel driver includes the driver and 4 similar panel configurations. It will match the panel name which is passed from platform data and setup the right configurations. With generic DPI panel driver, we can remove those 4 duplicated panel display drivers. In the future, it is simple for us just add new panel configuration date in panel-generic-dpi.c to support new display panel. Signed-off-by: Bryan Wu <bryan.wu@canonical.com> Acked-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2011-01-10OMAP: DSS2: OMAPFB: Add null pointer checkSamreen
A null pointer check added. And using kstrdup() instead of kmalloc() & strcpy() Signed-off-by: Samreen <samreen@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2011-01-10OMAP3: Enable display on ZOOM2/3/3630SDPKishore Y
Enable Display on zoom2, zoom3 and 3630sdp boards. Signed-off-by: Mukund Mittal <mmittal@ti.com> Signed-off-by: Kishore Y <kishore.y@ti.com> Signed-off-by: Samreen <samreen@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2011-01-10OMAP3: ZOOM2/3/3630SDP: Add display board file for OMAP3Kishore Y
Board-zoom-display.c added as a common file for display functionality on boards zoom2, zoom3 and 3630sdp. Signed-off-by: Mukund Mittal <mmittal@ti.com> Signed-off-by: Kishore Y <kishore.y@ti.com> Signed-off-by: Rajkumar N <rajkumar.nagarajan@ti.com> Signed-off-by: Samreen <samreen@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2011-01-10OMAP: DSS2: Add NEC NL8048HL11-01B display panelErik Gilling
NEC WVGA LCD NL8048HL11-01B panel support has been added. This panel is being used in zoom2/zoom3/3630 sdp boards. Signed-off-by: Mukund Mittal <mmittal@ti.com> Signed-off-by: Rajkumar N <rajkumar.nagarajan@ti.com> Signed-off-by: Samreen <samreen@ti.com> CC: Subbu Venkatesh <subramani.venkatesh@windriver.com> CC: Erik Gilling <konkers@android.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2011-01-10OMAP3630: DSS2: Enable Pre-Multiplied Alpha SupportRajkumar N
Enable dss to process color formats with pre-mulitplied alpha. With this we can have alpha values defined for each pixel and hence can have different blending values for each pixel. sysfs entry has been created for this and pre-multiplied alpha support is turned off by default. Signed-off-by: Sudeep Basavaraj <sudeep.basavaraj@ti.com> Signed-off-by: Rajkumar N <rajkumar.nagarajan@ti.com> Signed-off-by: Samreen <samreen@ti.com> Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2011-01-10OMAP3: DSS2: Split OMAP3 has feature for 3430 & 3630Samreen
Splitting the OMAP3 dss has feature separately for omap3430 & omap3630 Signed-off-by: Samreen <samreen@ti.com> Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2011-01-10OMAP: DSS2: Fix: Read correct bit in dispc_enable_alpha_blending()Archit Taneja
Read correct DISPC_CONFIG bit when the channel is DIGIT, remove extra line at the end of the function. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2011-01-10x86, lapic-timer: Increase the max_delta to 31 bitsPierre Tardy
Latest atom socs(penwell) does not have hpet timer. As their local APIC timer is clocked at 400KHZ, and the current code limit their Initial Counter register to 23 bits, they cannot sleep more than 1.34 seconds which leads to ~2 spurious wakeup per second (1 per thread) These SOCs support 32bit timer so we change the max_delta to at least 31bits. So we can at least sleep for 300 seconds. We could not find any previous chip errata where lapic would only have 23 bit precision As powertop is suggesting to activate HPET to "sleep longer", this could mean this problem is already known. Problem is here since very first implementation of lapic timer as a clock event e9e2cdb [PATCH] clockevents: i386 drivers. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Pierre Tardy <pierre.tardy@intel.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Adrian Bunk <bunk@stusta.de> Cc: H. Peter Anvin <hpa@linux.intel.com> Cc: john stultz <johnstul@us.ibm.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Andi Kleen <ak@suse.de> LKML-Reference: <1294327409-19426-1-git-send-email-pierre.tardy@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-10Merge branch 'x86/numa' into x86/urgentIngo Molnar
Merge reason: Topic is ready for upstream. Signed-off-by: Ingo Molnar <mingo@elte.hu>
generated by cgit (git 2.34.1) at 2025-10-02 12:40:15 +0000