| Age | Commit message (Collapse) | Author |
|---|
|
Commit a87036add092 ("KVM: x86: disable MPX if host did not enable
MPX XSAVE features") introduced kvm_mpx_supported() to return true
iff MPX is enabled in the host.
However, that commit seems to have missed replacing some calls to
kvm_x86_ops->mpx_supported() to kvm_mpx_supported().
Complete original commit by replacing remaining calls to
kvm_mpx_supported().
Fixes: a87036add092 ("KVM: x86: disable MPX if host did not enable
MPX XSAVE features")
Suggested-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Before this commit, KVM exposes MPX VMX controls to L1 guest only based
on if KVM and host processor supports MPX virtualization.
However, these controls should be exposed to guest only in case guest
vCPU supports MPX.
Without this change, a L1 guest running with kernel which don't have
commit 691bd4340bef ("kvm: vmx: allow host to access guest
MSR_IA32_BNDCFGS") asserts in QEMU on the following:
qemu-kvm: error: failed to set MSR 0xd90 to 0x0
qemu-kvm: .../qemu-2.10.0/target/i386/kvm.c:1801 kvm_put_msrs:
Assertion 'ret == cpu->kvm_msr_buf->nmsrs failed'
This is because L1 KVM kvm_init_msr_list() will see that
vmx_mpx_supported() (As it only checks MPX VMX controls support) and
therefore KVM_GET_MSR_INDEX_LIST IOCTL will include MSR_IA32_BNDCFGS.
However, later when L1 will attempt to set this MSR via KVM_SET_MSRS
IOCTL, it will fail because !guest_cpuid_has_mpx(vcpu).
Therefore, fix the issue by exposing MPX VMX controls to L1 guest only
when vCPU supports MPX.
Fixes: 36be0b9deb23 ("KVM: x86: Add nested virtualization support for MPX")
Reported-by: Eyal Moscovici <eyal.moscovici@oracle.com>
Reviewed-by: Nikita Leshchenko <nikita.leshchenko@oracle.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Not all execution modes are valid for a guest, and some of them
depend on what the HW actually supports. Let's verify that what
userspace provides is compatible with both the VM settings and
the HW capabilities.
Cc: <stable@vger.kernel.org>
Fixes: 0d854a60b1d7 ("arm64: KVM: enable initialization of a 32bit vcpu")
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
We currently allow userspace to access the core register file
in about any possible way, including straddling multiple
registers and doing unaligned accesses.
This is not the expected use of the ABI, and nobody is actually
using it that way. Let's tighten it by explicitly checking
the size and alignment for each field of the register file.
Cc: <stable@vger.kernel.org>
Fixes: 2f4a07c5f9fe ("arm64: KVM: guest one-reg interface")
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
[maz: rewrote Dave's initial patch to be more easily backported]
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
reg_process_hint_country_ie() can free regulatory_request and return
REG_REQ_ALREADY_SET. We shouldn't use regulatory_request after it's
called. KASAN error was observed when this happens.
BUG: KASAN: use-after-free in reg_process_hint+0x839/0x8aa [cfg80211]
Read of size 4 at addr ffff8800c430d434 by task kworker/1:3/89
<snipped>
Workqueue: events reg_todo [cfg80211]
Call Trace:
dump_stack+0xc1/0x10c
? _atomic_dec_and_lock+0x1ad/0x1ad
? _raw_spin_lock_irqsave+0xa0/0xd2
print_address_description+0x86/0x26f
? reg_process_hint+0x839/0x8aa [cfg80211]
kasan_report+0x241/0x29b
reg_process_hint+0x839/0x8aa [cfg80211]
reg_todo+0x204/0x5b9 [cfg80211]
process_one_work+0x55f/0x8d0
? worker_detach_from_pool+0x1b5/0x1b5
? _raw_spin_unlock_irq+0x65/0xdd
? _raw_spin_unlock_irqrestore+0xf3/0xf3
worker_thread+0x5dd/0x841
? kthread_parkme+0x1d/0x1d
kthread+0x270/0x285
? pr_cont_work+0xe3/0xe3
? rcu_read_unlock_sched_notrace+0xca/0xca
ret_from_fork+0x22/0x40
Allocated by task 2718:
set_track+0x63/0xfa
__kmalloc+0x119/0x1ac
regulatory_hint_country_ie+0x38/0x329 [cfg80211]
__cfg80211_connect_result+0x854/0xadd [cfg80211]
cfg80211_rx_assoc_resp+0x3bc/0x4f0 [cfg80211]
smsc95xx v1.0.6
ieee80211_sta_rx_queued_mgmt+0x1803/0x7ed5 [mac80211]
ieee80211_iface_work+0x411/0x696 [mac80211]
process_one_work+0x55f/0x8d0
worker_thread+0x5dd/0x841
kthread+0x270/0x285
ret_from_fork+0x22/0x40
Freed by task 89:
set_track+0x63/0xfa
kasan_slab_free+0x6a/0x87
kfree+0xdc/0x470
reg_process_hint+0x31e/0x8aa [cfg80211]
reg_todo+0x204/0x5b9 [cfg80211]
process_one_work+0x55f/0x8d0
worker_thread+0x5dd/0x841
kthread+0x270/0x285
ret_from_fork+0x22/0x40
<snipped>
Signed-off-by: Yu Zhao <yuzhao@google.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
key->sta is only valid after ieee80211_key_link, which is called later
in this function. Because of that, the IEEE80211_KEY_FLAG_RX_MGMT is
never set when management frame protection is enabled.
Fixes: e548c49e6dc6b ("mac80211: add key flag for management keys")
Cc: stable@vger.kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
cfg80211_wext_giwrate and sinfo.pertid might allocate sinfo.pertid via
rdev_get_station(), but never release it. Fix that.
Fixes: 8689c051a201 ("cfg80211: dynamically allocate per-tid stats for station info")
Signed-off-by: Stefan Seyfried <seife+kernel@b1-systems.com>
[johannes: fix error path, use cfg80211_sinfo_release_content(), add Fixes]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Instead of allocating a fake IOMMU domain for all Exynos DRM components,
simply reuse the default IOMMU domain of the already selected DMA device.
This allows some design changes in IOMMU framework without breaking IOMMU
support in Exynos DRM.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
The i2c-scmi driver crashes when the SMBus Write Block transaction is
executed:
WARNING: CPU: 9 PID: 2194 at mm/page_alloc.c:3931 __alloc_pages_slowpath+0x9db/0xec0
Call Trace:
? get_page_from_freelist+0x49d/0x11f0
? alloc_pages_current+0x6a/0xe0
? new_slab+0x499/0x690
__alloc_pages_nodemask+0x265/0x280
alloc_pages_current+0x6a/0xe0
kmalloc_order+0x18/0x40
kmalloc_order_trace+0x24/0xb0
? acpi_ut_allocate_object_desc_dbg+0x62/0x10c
__kmalloc+0x203/0x220
acpi_os_allocate_zeroed+0x34/0x36
acpi_ut_copy_eobject_to_iobject+0x266/0x31e
acpi_evaluate_object+0x166/0x3b2
acpi_smbus_cmi_access+0x144/0x530 [i2c_scmi]
i2c_smbus_xfer+0xda/0x370
i2cdev_ioctl_smbus+0x1bd/0x270
i2cdev_ioctl+0xaa/0x250
do_vfs_ioctl+0xa4/0x600
SyS_ioctl+0x79/0x90
do_syscall_64+0x73/0x130
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
ACPI Error: Evaluating _SBW: 4 (20170831/smbus_cmi-185)
This problem occurs because the length of ACPI Buffer object is not
defined/initialized in the code before a corresponding ACPI method is
called. The obvious patch below fixes this issue.
Signed-off-by: Edgar Cherkasov <echerkasov@dev.rtsoft.ru>
Acked-by: Viktor Krasnov <vkrasnov@dev.rtsoft.ru>
Acked-by: Michael Brunner <Michael.Brunner@kontron.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
|
Commit 01239d77b9dd ("xfs: fix a null pointer dereference in
xfs_bmap_extents_to_btree") attempted to fix a null pointer
dreference when a fuzzing corruption of some kind was found.
This fix was flawed, resulting in assert failures like:
XFS: Assertion failed: ifp->if_broot == NULL, file: fs/xfs/libxfs/xfs_bmap.c, line: 715
.....
Call Trace:
xfs_bmap_extents_to_btree+0x6b9/0x7b0
__xfs_bunmapi+0xae7/0xf00
? xfs_log_reserve+0x1c8/0x290
xfs_reflink_remap_extent+0x20b/0x620
xfs_reflink_remap_blocks+0x7e/0x290
xfs_reflink_remap_range+0x311/0x530
vfs_dedupe_file_range_one+0xd7/0xe0
vfs_dedupe_file_range+0x15b/0x1a0
do_vfs_ioctl+0x267/0x6c0
The problem is that the error handling code now asserts that the
inode fork is not in btree format before the error handling code
undoes the modifications that put the fork back in extent format.
Fix this by moving the assert back to after the xfs_iroot_realloc()
call that returns the fork to extent format, and clean up the jump
labels to be meaningful.
Also, returning ENOSPC when xfs_btree_get_bufl() fails to
instantiate the buffer that was allocated (the actual fix in the
commit mentioned above) is incorrect. This is a fatal error - only
an invalid block address or a filesystem shutdown can result in
failing to get a buffer here.
Hence change this to EFSCORRUPTED so that the higher layer knows
this was a corruption related failure and should not treat it as an
ENOSPC error. This should result in a shutdown (via cancelling a
dirty transaction) which is necessary as we do not attempt to clean
up the (invalid) block that we have already allocated.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
As reported by nixiaoming, with some minor clarifications:
1) memory leak in ramoops_register_dummy():
dummy_data = kzalloc(sizeof(*dummy_data), GFP_KERNEL);
but no kfree() if platform_device_register_data() fails.
2) memory leak in ramoops_init():
Missing platform_device_unregister(dummy) and kfree(dummy_data)
if platform_driver_register(&ramoops_driver) fails.
I've clarified the purpose of ramoops_register_dummy(), and added a
common cleanup routine for all three failure paths to call.
Reported-by: nixiaoming <nixiaoming@huawei.com>
Cc: stable@vger.kernel.org
Cc: Anton Vorontsov <anton@enomsg.org>
Cc: Colin Cross <ccross@android.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
When freeing the fw_priv the item is taken off the list. This causes an
oops in the FW_OPT_NOCACHE case as the list object is not initialized.
Make sure to initialize the list object regardless of this flag.
Fixes: 422b3db2a503 ("firmware: Fix security issue with request_firmware_into_buf()")
Cc: stable@vger.kernel.org
Cc: Rishabh Bhatnagar <rishabhb@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add flags #defines to kerneldoc documentation in a
useful place.
Signed-off-by: Alan Tull <atull@kernel.org>
Acked-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
fpga_bridge_dev_match() returns a FPGA bridge struct, not a
FPGA manager struct so s/manager/bridge/.
Signed-off-by: Alan Tull <atull@kernel.org>
Acked-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
'error' variable is left uninitialized in case we see an unknown operation.
As we don't immediately return and proceed to pwrite() we need to set it
to something, HV_E_FAIL sounds good enough.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
A couple drivers were accessing the region struct after it had been
freed. Save off the pointer to the mgr before the region struct gets
freed.
Signed-off-by: Alan Tull <atull@kernel.org>
Acked-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
With CONFIG_DEBUG_PREEMPT=y, I always see this warning:
BUG: using smp_processor_id() in preemptible [00000000]
Fix the false warning by using get/put_cpu().
Here vmbus_connect() sends a message to the host and waits for the
host's response. The host will deliver the response message and an
interrupt on CPU msg->target_vcpu, and later the interrupt handler
will wake up vmbus_connect(). vmbus_connect() doesn't really have
to run on the same cpu as CPU msg->target_vcpu, so it's safe to
call put_cpu() just here.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Cc: stable@vger.kernel.org
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
|
|
Miguel writes:
"A trivial fix for auxdisplay
- MAINTAINERS reference fix for moved file
Reported by Joe Perches"
* tag 'auxdisplay-for-greg-v4.19-rc6' of https://github.com/ojeda/linux:
MAINTAINERS: fix reference to moved drivers/{misc => auxdisplay}/panel.c
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Dan writes:
"filesystem-dax for 4.19-rc6
Fix a deadlock in the new for 4.19 dax_lock_mapping_entry() routine."
* tag 'libnvdimm-fixes2-4.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
dax: Fix deadlock in dax_lock_mapping_entry()
|
|
Commit 51c1e9b554c9 ("auxdisplay: Move panel.c to drivers/auxdisplay folder")
moved the file, but the MAINTAINERS reference was not updated.
Link: https://lore.kernel.org/lkml/20180928220131.31075-1-joe@perches.com/
Reported-by: Joe Perches <joe@perches.com>
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
|
|
Jens writes:
"Block fixes for 4.19-rc6
A set of fixes that should go into this release. This pull request
contains:
- A fix (hopefully) for the persistent grants for xen-blkfront. A
previous fix from this series wasn't complete, hence reverted, and
this one should hopefully be it. (Boris Ostrovsky)
- Fix for an elevator drain warning with SMR devices, which is
triggered when you switch schedulers (Damien)
- bcache deadlock fix (Guoju Fang)
- Fix for the block unplug tracepoint, which has had the
timer/explicit flag reverted since 4.11 (Ilya)
- Fix a regression in this series where the blk-mq timeout hook is
invoked with the RCU read lock held, hence preventing it from
blocking (Keith)
- NVMe pull from Christoph, with a single multipath fix (Susobhan Dey)"
* tag 'for-linus-20180929' of git://git.kernel.dk/linux-block:
xen/blkfront: correct purging of persistent grants
Revert "xen/blkfront: When purging persistent grants, keep them in the buffer"
blk-mq: I/O and timer unplugs are inverted in blktrace
bcache: add separate workqueue for journal_write to avoid deadlock
xen/blkfront: When purging persistent grants, keep them in the buffer
block: fix deadline elevator drain for zoned block devices
blk-mq: Allow blocking queue tag iter callbacks
nvme: properly propagate errors in nvme_mpath_init
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Thomas writes:
"A single fix for the AMD memory encryption boot code so it does not
read random garbage instead of the cached encryption bit when a kexec
kernel is allocated above the 32bit address limit."
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot: Fix kexec booting failure in the SEV bit detection code
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Thomas writes:
"Three small fixes for clocksource drivers:
- Proper error handling in the Atmel PIT driver
- Add CLOCK_SOURCE_SUSPEND_NONSTOP for TI SoCs so suspend works again
- Fix the next event function for Facebook Backpack-CMM BMC chips so
usleep(100) doesnt sleep several milliseconds"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/drivers/timer-atmel-pit: Properly handle error cases
clocksource/drivers/fttmr010: Fix set_next_event handler
clocksource/drivers/ti-32k: Add CLOCK_SOURCE_SUSPEND_NONSTOP flag for non-am43 SoCs
|
|
Fix a simple typo: attribuets -> attributes
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Disable the clk during suspend to save power. Note that tp->clk may be
NULL, the clk core functions handle this without problems.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Carlo Caione <carlo@endlessm.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In regular NIC transmission flow, driver always configures MAC using
Tx queue zero descriptor as a part of MAC learning flow.
But with multi Tx queue supported NIC, regular transmission can occur on
any non-zero Tx queue and from that context it uses
Tx queue zero descriptor to configure MAC, at the same time TX queue
zero could be used by another CPU for regular transmission
which could lead to Tx queue zero descriptor corruption and cause FW
abort.
This patch fixes this in such a way that driver always configures
learned MAC address from the same Tx queue which is used for
regular transmission.
Fixes: 7e2cf4feba05 ("qlcnic: change driver hardware interface mechanism")
Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We see the following scenario:
1) Link endpoint B on node 1 discovers that its peer endpoint is gone.
Since there is a second working link, failover procedure is started.
2) Link endpoint A on node 1 sends a FAILOVER message to peer endpoint
A on node 2. The node item 1->2 goes to state FAILINGOVER.
3) Linke endpoint A/2 receives the failover, and is supposed to take
down its parallell link endpoint B/2, while producing a FAILOVER
message to send back to A/1.
4) However, B/2 has already been deleted, so no FAILOVER message can
created.
5) Node 1->2 remains in state FAILINGOVER forever, refusing to receive
any messages that can bring B/1 up again. We are left with a non-
redundant link between node 1 and 2.
We fix this with letting endpoint A/2 build a dummy FAILOVER message
to send to back to A/1, so that the situation can be resolved.
Signed-off-by: LUU Duc Canh <canh.d.luu@dektech.com.au>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Thomas writes:
"A single fix for a missing sanity check when a pinned event is tried
to be read on the wrong CPU due to a legit event scheduling failure."
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Add sanity check to deal with pinned event failure
|
|
Florian Fainelli says:
====================
net: usb: Check for Wake-on-LAN modes
Most of our USB Ethernet drivers don't seem to be checking properly
whether the user is supplying a correct Wake-on-LAN mode to enter, so
the experience as an user could be confusing, since it would generally
lead to either no wake-up, or the device not being marked for wake-up.
Please review!
Changes in v2:
- fixed lan78xx handling, thanks Woojung!
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The driver does not check for Wake-on-LAN modes specified by an user,
but will conditionally set the device as wake-up enabled or not based on
that, which could be a very confusing user experience.
Fixes: e0e474a83c18 ("smsc95xx: add wol magic packet support")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The driver does not check for Wake-on-LAN modes specified by an user,
but will conditionally set the device as wake-up enabled or not based on
that, which could be a very confusing user experience.
Fixes: 6c636503260d ("smsc75xx: add wol magic packet support")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The driver does not check for Wake-on-LAN modes specified by an user,
but will conditionally set the device as wake-up enabled or not based on
that, which could be a very confusing user experience.
Fixes: 21ff2e8976b1 ("r8152: support WOL")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The driver currently silently accepts unsupported Wake-on-LAN modes
(other than WAKE_PHY or WAKE_MAGIC) without reporting that to the user,
which is confusing.
Fixes: 19a38d8e0aa3 ("USB2NET : SR9800 : One chip USB2.0 USB2NET SR9800 Device Driver Support")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The driver supports a fair amount of Wake-on-LAN modes, but is not
checking that the user specified one that is supported.
Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Woojung Huh <Woojung.Huh@Microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The driver currently silently accepts unsupported Wake-on-LAN modes
(other than WAKE_PHY or WAKE_MAGIC) without reporting that to the user,
which is confusing.
Fixes: e2ca90c276e1 ("ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The driver currently silently accepts unsupported Wake-on-LAN modes
(other than WAKE_PHY or WAKE_MAGIC) without reporting that to the user,
which is confusing.
Fixes: 2e55cc7210fe ("[PATCH] USB: usbnet (3/9) module for ASIX Ethernet adapters")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan
Stefan Schmidt says:
====================
pull-request: ieee802154 for net 2018-09-28
An update from ieee802154 for your *net* tree.
Some cleanup patches throughout the drivers from the Huawei tag team
Yue Haibing and Zhong Jiang.
Xue is replacing some magic numbers with defines in his mcr20a driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
David Howells says:
====================
rxrpc: Fixes
Here are some miscellaneous fixes for AF_RXRPC:
(1) Remove a duplicate variable initialisation.
(2) Fix one of the checks made when we decide to set up a new incoming
service call in which a flag is being checked in the wrong field of
the packet header. This check is abstracted out into helper
functions.
(3) Fix RTT gathering. The code has been trying to make use of socket
timestamps, but wasn't actually enabling them. The code has also been
recording a transmit time for the outgoing packet for which we're
going to measure the RTT after sending the message - but we can get
the incoming packet before we get to that and record a negative RTT.
(4) Fix the emission of BUSY packets (we are emitting ABORTs instead).
(5) Improve error checking on incoming packets.
(6) Try to fix a bug in new service call handling whereby a BUG we should
never be able to reach somehow got triggered. Do this by moving much
of the checking as early as possible and not repeating it later
(depends on (5) above).
(7) Fix the sockopts set on a UDP6 socket to include the ones set on a
UDP4 socket so that we receive UDP4 errors and packet-too-large
notifications too.
(8) Fix the distribution of errors so that we do it at the point of
receiving an error in the UDP callback rather than deferring it
thereby cutting short any transmissions that would otherwise occur in
the window.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Rafael writes:
"Power management fix for 4.19-rc6
Fix incorrect __init and __exit annotations in the Qualcomm
Kryo cpufreq driver (Nathan Chancellor)."
* tag 'pm-4.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: qcom-kryo: Fix section annotations
|
|
There is currently a warning when building the Kryo cpufreq driver into
the kernel image:
WARNING: vmlinux.o(.text+0x8aa424): Section mismatch in reference from
the function qcom_cpufreq_kryo_probe() to the function
.init.text:qcom_cpufreq_kryo_get_msm_id()
The function qcom_cpufreq_kryo_probe() references
the function __init qcom_cpufreq_kryo_get_msm_id().
This is often because qcom_cpufreq_kryo_probe lacks a __init
annotation or the annotation of qcom_cpufreq_kryo_get_msm_id is wrong.
Remove the '__init' annotation from qcom_cpufreq_kryo_get_msm_id
so that there is no more mismatch warning.
Additionally, Nick noticed that the remove function was marked as
'__init' when it should really be marked as '__exit'.
Fixes: 46e2856b8e18 (cpufreq: Add Kryo CPU scaling driver)
Fixes: 5ad7346b4ae2 (cpufreq: kryo: Add module remove and exit)
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: 4.18+ <stable@vger.kernel.org> # 4.18+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Christoph writes:
"dma mapping fix for 4.19-rc6
fix a missing Kconfig symbol for commits introduced in 4.19-rc"
* tag 'dma-mapping-4.19-3' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: add the missing ARCH_HAS_SYNC_DMA_FOR_CPU_ALL declaration
|
|
The iomap page fault mechanism currently dirties the associated page
after the full block range of the page has been allocated. This
leaves the page susceptible to delayed allocations without ever
being set dirty on sub-page block sized filesystems.
For example, consider a page fault on a page with one preexisting
real (non-delalloc) block allocated in the middle of the page. The
first iomap_apply() iteration performs delayed allocation on the
range up to the preexisting block, the next iteration finds the
preexisting block, and the last iteration attempts to perform
delayed allocation on the range after the prexisting block to the
end of the page. If the first allocation succeeds and the final
allocation fails with -ENOSPC, iomap_apply() returns the error and
iomap_page_mkwrite() fails to dirty the page having already
performed partial delayed allocation. This eventually results in the
page being invalidated without ever converting the delayed
allocation to real blocks.
This problem is reliably reproduced by generic/083 on XFS on ppc64
systems (64k page size, 4k block size). It results in leaked
delalloc blocks on inode reclaim, which triggers an assert failure
in xfs_fs_destroy_inode() and filesystem accounting inconsistency.
Move the set_page_dirty() call from iomap_page_mkwrite() to the
actor callback, similar to how the buffer head implementation works.
The actor callback is called iff ->iomap_begin() returns success, so
ensures the page is dirtied as soon as possible after an allocation.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
One of the first steps of log recovery is to check for the special
case of a zeroed log. If the first cycle in the log is zero or the
tail portion of the log is zeroed, the head is set to the first
instance of cycle 0. xlog_find_zeroed() includes a sanity check that
enforces that the first cycle in the log must be 1 if the last cycle
is 0. While this is true in most cases, the check is not totally
valid because it doesn't consider the case where the filesystem
crashed after a partial/out of order log buffer completion that
wraps around the end of the physical log.
For example, consider a filesystem that has completed most of the
first cycle of the log, reaches the end of the physical log and
splits the next single log buffer write into two in order to wrap
around the end of the log. If these I/Os are reordered, the second
(wrapped) I/O completes and the first happens to fail, the log is
left in a state where the last cycle of the log is 0 and the first
cycle is 2. This causes the xlog_find_zeroed() sanity check to fail
and prevents the filesystem from mounting. This situation has been
reproduced on particular systems via repeated runs of generic/475.
This is an expected state that log recovery already knows how to
deal with, however. Since the log is still partially zeroed, the
head is detected correctly and points to a valid tail. The
subsequent stale block detection clears blocks beyond the head up to
the tail (within a maximum range), with the express purpose of
clearing such out of order writes. As expected, this removes the out
of order cycle 2 blocks at the physical start of the log.
In other words, the only thing that prevents a clean mount and
recovery of the filesystem in this scenario is the specific (last ==
0 && first != 1) sanity check in xlog_find_zeroed(). Since the log
head/tail are now independently validated via cycle, log record and
CRC checks, this highly specific first cycle check is of dubious
value. Remove it and rely on the higher level validation to
determine whether log content is sane and recoverable.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
Verify the inode di_forkoff, lifted from xfs_repair's
process_check_inode_forkoff().
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
The iomap direct I/O code issues a single ->end_io call for the whole
I/O request, and if some of the extents cowered needed a COW operation
it will call xfs_reflink_end_cow over the whole range.
When we do AIO writes we drop the iolock after doing the initial setup,
but before the I/O completion. Between dropping the lock and completing
the I/O we can have a racing buffered write create new delalloc COW fork
extents in the region covered by the outstanding direct I/O write, and
thus see delalloc COW fork extents in xfs_reflink_end_cow. As
concurrent writes are fundamentally racy and no guarantees are given we
can simply skip those.
This can be easily reproduced with xfstests generic/208 in always_cow
mode.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
xchk_inode_flags2() currently treats any di_flags2 values that the
running kernel doesn't recognize as corruption, and calls
xchk_ino_set_corrupt() if they are set. However, it's entirely possible
that these flags were set in some newer kernel and are quite valid,
but ignored in this kernel.
(Validators don't care one bit about unknown di_flags2.)
Call xchk_ino_set_warning instead, because this may or may not actually
indicate a problem.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
Remove duplicated include xfs_alloc.h
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
This function is only used to punch out delayed allocations on I/O
failure, which means we need to have read the extents earlier.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
When xfs_reflink_allocate_cow() allocates a transaction, it drops
the ILOCK to perform the operation. This Introduces a race condition
where another thread modifying the file can perform the COW
allocation operation underneath us. This result in the retry loop
finding an allocated block and jumping straight to the conversion
code. It does not, however, cancel the transaction it holds and so
this gets leaked. This results in a lockdep warning:
================================================
WARNING: lock held when returning to user space!
4.18.5 #1 Not tainted
------------------------------------------------
worker/6123 is leaving the kernel with locks still held!
1 lock held by worker/6123:
#0: 000000009eab4f1b (sb_internal#2){.+.+}, at: xfs_trans_alloc+0x17c/0x220
And eventually the filesystem deadlocks because it runs out of log
space that is reserved by the leaked transaction and never gets
released.
The logic flow in xfs_reflink_allocate_cow() is a convoluted mess of
gotos - it's no surprise that it has bug where the flow through
several goto jumps then fails to clean up context from a non-obvious
logic path. CLean up the logic flow and make sure every path does
the right thing.
Reported-by: Alexander Y. Fomichev <git.user@gmail.com>
Tested-by: Alexander Y. Fomichev <git.user@gmail.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200981
Signed-off-by: Dave Chinner <dchinner@redhat.com>
[hch: slight refactor]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
