| Age | Commit message (Collapse) | Author |
|---|
|
In the for loop used to allocate the loc_array and bmap for each port, a
memory leak is possible when the allocation for loc_array succeeds,
but the allocation for bmap fails. This is because when the control flow
goes to the label free_eth_finfo, only the allocations starting from
(i-1)th iteration are freed.
Fix that by freeing the loc_array in the bmap allocation error path.
Fixes: d915c299f1da ("cxgb4: add skeleton for ethtool n-tuple filters")
Signed-off-by: Abdun Nihaal <abdun.nihaal@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250414170649.89156-1-abdun.nihaal@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If we race with the user changing the metadata_replicas setting, this
could cause us to get an incorrectly sized disk reservation.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Avoid double-copying of string literals. Use a "const char *" for each
string instead of copying from .rodata into stack and then into the skb.
We can go directly from .rodata to the skb.
This also works around a Clang bug (that has since been fixed[1]).
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202401250927.1poZERd6-lkp@intel.com/
Fixes: ab4e4380d4e1 ("Bluetooth: Add vhci devcoredump support")
Link: https://github.com/llvm/llvm-project/commit/ea2e66aa8b6e363b89df66dc44275a0d7ecd70ce [1]
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This is required for passing PTS test cases:
- L2CAP/COS/CED/BI-14-C
Multiple Signaling Command in one PDU, Data Truncated, BR/EDR,
Connection Request
- L2CAP/COS/CED/BI-15-C
Multiple Signaling Command in one PDU, Data Truncated, BR/EDR,
Disconnection Request
The test procedure defined in L2CAP.TS.p39 for both tests is:
1. The Lower Tester sends a C-frame to the IUT with PDU Length set
to 8 and Channel ID set to the correct signaling channel for the
logical link. The Information payload contains one L2CAP_ECHO_REQ
packet with Data Length set to 0 with 0 octets of echo data and
one command packet and Data Length set as specified in Table 4.6
and the correct command data.
2. The IUT sends an L2CAP_ECHO_RSP PDU to the Lower Tester.
3. Perform alternative 3A, 3B, 3C, or 3D depending on the IUT’s
response.
Alternative 3A (IUT terminates the link):
3A.1 The IUT terminates the link.
3A.2 The test ends with a Pass verdict.
Alternative 3B (IUT discards the frame):
3B.1 The IUT does not send a reply to the Lower Tester.
Alternative 3C (IUT rejects PDU):
3C.1 The IUT sends an L2CAP_COMMAND_REJECT_RSP PDU to the
Lower Tester.
Alternative 3D (Any other IUT response):
3D.1 The Upper Tester issues a warning and the test ends.
4. The Lower Tester sends a C-frame to the IUT with PDU Length set
to 4 and Channel ID set to the correct signaling channel for the
logical link. The Information payload contains Data Length set to
0 with an L2CAP_ECHO_REQ packet with 0 octets of echo data.
5. The IUT sends an L2CAP_ECHO_RSP PDU to the Lower Tester.
With expected outcome:
In Steps 2 and 5, the IUT responds with an L2CAP_ECHO_RSP.
In Step 3A.1, the IUT terminates the link.
In Step 3B.1, the IUT does not send a reply to the Lower Tester.
In Step 3C.1, the IUT rejects the PDU.
In Step 3D.1, the IUT sends any valid response.
Currently PTS fails with the following logs:
Failed to receive ECHO RESPONSE.
And HCI logs:
> ACL Data RX: Handle 11 flags 0x02 dlen 20
L2CAP: Information Response (0x0b) ident 2 len 12
Type: Fixed channels supported (0x0003)
Result: Success (0x0000)
Channels: 0x000000000000002e
L2CAP Signaling (BR/EDR)
Connectionless reception
AMP Manager Protocol
L2CAP Signaling (LE)
> ACL Data RX: Handle 11 flags 0x02 dlen 13
frame too long
08 01 00 00 08 02 01 00 aa .........
Cc: stable@vger.kernel.org
Signed-off-by: Frédéric Danis <frederic.danis@collabora.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- A couple of maintainers updates
- Remove obsolete Renesas TPU timer binding
- Add i.MX94 support to nxp,sysctr-timer and fsl,irqsteer
- Add support for 'data-lanes' property in fsl,imx8mq-nwl-dsi binding
* tag 'devicetree-fixes-for-6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: soc: fsl: fsl,ls1028a-reset: Fix maintainer entry
dt-bindings: timer: renesas,tpu: remove obsolete binding
dt-bindings: timer: nxp,sysctr-timer: Add i.MX94 support
dt-bindings: interrupt-controller: fsl,irqsteer: Add i.MX94 support
dt-bindings: display: nwl-dsi: Allow 'data-lanes' property for port@1
dt-bindings: xilinx: Remove myself from maintainership
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
- Disable ahash request chaining as it causes problems with the sa2ul
driver
- Fix a couple of bugs in the new scomp stream freeing code
- Fix an old caam refcount underflow that is possibly showing up now
because of the new parallel self-tests
- Fix regression in the tegra driver
* tag 'v6.15-p4' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: ahash - Disable request chaining
crypto: scomp - Fix wild memory accesses in scomp_free_streams
crypto: caam/qi - Fix drv_ctx refcount bug
crypto: scomp - Fix null-pointer deref when freeing streams
crypto: tegra - Fix IV usage for AES ECB
|
|
Filesystems with an internal zoned rt section use xfs_rtblock_t values
that are relative to the start of the data device. When fsmap reports
on internal rt sections, it reports the space used by the data section
as "OWN_FS".
Unfortunately, the logic for resuming a query isn't quite right, so
xfs/273 fails because it stress-tests GETFSMAP with a single-record
buffer. If we enter the "report fake space as OWN_FS" block with a
nonzero key[0].fmr_length, we should add that to key[0].fmr_physical
and recheck if we still need to emit the fake record. We should /not/
just return 0 from the whole function because that prevents all rmap
record iteration.
If we don't enter that block, the resumption is still wrong.
keys[*].fmr_physical is a reflection of what we copied out to userspace
on a previous query, which means that it already accounts for rgstart.
It is not correct to add rtstart_daddr when computing start_rtb or
end_rtb, so stop that.
While we're at it, add a xfs_has_zoned to make it clear that this is a
zoned filesystem thing.
Fixes: e50ec7fac81aa2 ("xfs: enable fsmap reporting for internal RT devices")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
There is a spelling mistake in fs/xfs/xfs_log.c. Fix it.
Signed-off-by: Zhang Xianwei <zhang.xianwei8@zte.com.cn>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
When filling the taskfile result for a successful NCQ command, we use
the SDB FIS from the FIS Receive Area, see e.g. ahci_qc_ncq_fill_rtf().
However, the SDB FIS only has fields STATUS and ERROR.
For a successful NCQ command that has sense data, we will have a
successful sense data descriptor, in the Sense Data for Successful NCQ
Commands log.
Since we have access to additional taskfile result fields, fill in these
additional fields in qc->result_tf.
This matches how for failing/aborted NCQ commands, we will use e.g.
ahci_qc_fill_rtf() to fill in some fields, but then for the command that
actually caused the NCQ error, we will use ata_eh_read_log_10h(), which
provides additional fields, saving additional fields/overriding the
qc->result_tf that was fetched using ahci_qc_fill_rtf().
Fixes: 18bd7718b5c4 ("scsi: ata: libata: Handle completion of CDL commands using policy 0xD")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
|
|
The ACPI byte code inside the ACPI control method responsible for
handling the WMI method calls uses a global buffer for constructing
the return value, yet the ACPI control method itself is not marked
as "Serialized".
This means that calling WMI methods on this WMI device is not
thread-safe, as concurrent WMI method calls will corrupt the global
buffer.
Fix this by serializing the WMI method calls using a mutex.
Cc: stable@vger.kernel.org # 6.x.x: 912d614ac99e: platform/x86: msi-wmi-platform: Rename "data" variable
Fixes: 9c0beb6b29e7 ("platform/x86: wmi: Add MSI WMI Platform driver")
Tested-by: Antheas Kapenekakis <lkml@antheas.dev>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20250414140453.7691-2-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2025-04-15
The first patch is by Davide Caratti and fixes the missing derement in
the protocol inuse counter for the J1939 CAN protocol.
The last patch is by Weizhao Ouyang and fixes a broken quirks check in
the rockchip CAN-FD driver.
* tag 'linux-can-fixes-for-6.15-20250415' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: rockchip_canfd: fix broken quirks checks
can: fix missing decrement of j1939_proto.inuse_idx
====================
Link: https://patch.msgid.link/20250415103401.445981-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It was originally meant to replace the dev_hold with netdev_hold. But this
was missed in batadv_hardif_enable_interface(). As result, there was an
imbalance and a hang when trying to remove the mesh-interface with
(previously) active hard-interfaces:
unregister_netdevice: waiting for batadv0 to become free. Usage count = 3
Fixes: 00b35530811f ("batman-adv: adopt netdev_hold() / netdev_put()")
Suggested-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot+ff3aa851d46ab82953a3@syzkaller.appspotmail.com
Reported-by: syzbot+4036165fc595a74b09b2@syzkaller.appspotmail.com
Reported-by: syzbot+c35d73ce910d86c0026e@syzkaller.appspotmail.com
Reported-by: syzbot+48c14f61594bdfadb086@syzkaller.appspotmail.com
Reported-by: syzbot+f37372d86207b3bb2941@syzkaller.appspotmail.com
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250414-double_hold_fix-v5-1-10e056324cde@narfation.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Ido Schimmel says:
====================
fib_rules: Fix iif / oif matching on L3 master device
Patch #1 fixes a recently reported regression regarding FIB rules that
match on iif / oif being a VRF device.
Patch #2 adds test cases to the FIB rules selftest.
====================
Link: https://patch.msgid.link/20250414172022.242991-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add tests for FIB rules that match on iif / oif being a VRF device. Test
both good and bad flows.
With previous patch ("net: fib_rules: Fix iif / oif matching on L3
master device"):
# ./fib_rule_tests.sh
[...]
Tests passed: 328
Tests failed: 0
Without it:
# ./fib_rule_tests.sh
[...]
Tests passed: 324
Tests failed: 4
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250414172022.242991-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Before commit 40867d74c374 ("net: Add l3mdev index to flow struct and
avoid oif reset for port devices") it was possible to use FIB rules to
match on a L3 domain. This was done by having a FIB rule match on iif /
oif being a L3 master device. It worked because prior to the FIB rule
lookup the iif / oif fields in the flow structure were reset to the
index of the L3 master device to which the input / output device was
enslaved to.
The above scheme made it impossible to match on the original input /
output device. Therefore, cited commit stopped overwriting the iif / oif
fields in the flow structure and instead stored the index of the
enslaving L3 master device in a new field ('flowi_l3mdev') in the flow
structure.
While the change enabled new use cases, it broke the original use case
of matching on a L3 domain. Fix this by interpreting the iif / oif
matching on a L3 master device as a match against the L3 domain. In
other words, if the iif / oif in the FIB rule points to a L3 master
device, compare the provided index against 'flowi_l3mdev' rather than
'flowi_{i,o}if'.
Before cited commit, a FIB rule that matched on 'iif vrf1' would only
match incoming traffic from devices enslaved to 'vrf1'. With the
proposed change (i.e., comparing against 'flowi_l3mdev'), the rule would
also match traffic originating from a socket bound to 'vrf1'. Avoid that
by adding a new flow flag ('FLOWI_FLAG_L3MDEV_OIF') that indicates if
the L3 domain was derived from the output interface or the input
interface (when not set) and take this flag into account when evaluating
the FIB rule against the flow structure.
Avoid unnecessary checks in the data path by detecting that a rule
matches on a L3 master device when the rule is installed and marking it
as such.
Tested using the following script [1].
Output before 40867d74c374 (v5.4.291):
default dev dummy1 table 100 scope link
default dev dummy1 table 200 scope link
Output after 40867d74c374:
default dev dummy1 table 300 scope link
default dev dummy1 table 300 scope link
Output with this patch:
default dev dummy1 table 100 scope link
default dev dummy1 table 200 scope link
[1]
#!/bin/bash
ip link add name vrf1 up type vrf table 10
ip link add name dummy1 up master vrf1 type dummy
sysctl -wq net.ipv4.conf.all.forwarding=1
sysctl -wq net.ipv4.conf.all.rp_filter=0
ip route add table 100 default dev dummy1
ip route add table 200 default dev dummy1
ip route add table 300 default dev dummy1
ip rule add prio 0 oif vrf1 table 100
ip rule add prio 1 iif vrf1 table 200
ip rule add prio 2 table 300
ip route get 192.0.2.1 oif dummy1 fibmatch
ip route get 192.0.2.1 iif dummy1 from 198.51.100.1 fibmatch
Fixes: 40867d74c374 ("net: Add l3mdev index to flow struct and avoid oif reset for port devices")
Reported-by: hanhuihui <hanhuihui5@huawei.com>
Closes: https://lore.kernel.org/netdev/ec671c4f821a4d63904d0da15d604b75@huawei.com/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250414172022.242991-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit under Fixes converted tx_prod to be free running but missed
masking it on the Tx error path. This crashes on error conditions,
for example when DMA mapping fails.
Fixes: 6d1add95536b ("bnxt_en: Modify TX ring indexing logic.")
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250414143210.458625-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A reference to the device tree node is stored in a private struct, thus
the reference count has to be incremented. Also, decrement the count on
device removal and in the error path.
Fixes: 93a76530316a ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver")
Signed-off-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250414083942.4015060-1-mwalle@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Adding error pointer check after calling otx2_mbox_get_rsp().
This is similar to the commit bd3110bc102a
("octeontx2-pf: handle otx2_mbox_get_rsp errors in otx2_flows.c").
Signed-off-by: Chenyuan Yang <chenyuan0y@gmail.com>
Fixes: 6c40ca957fe5 ("octeontx2-pf: Adds TC offload support")
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250412183327.3550970-1-chenyuan0y@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit 479380efe1625e251008d24b2810283db60d6fcd.
The reset_method attribute on a PCI device is only intended to manage the
availability of function scoped resets for a device. It was never intended
to restrict resets targeting the bus or slot.
In introducing a restriction that each device must support function level
reset by testing pci_reset_supported(), we essentially create a catch-22,
that a device must have a function scope reset in order to support bus/slot
reset, when we use bus/slot reset to effect a reset of a device that does
not support a function scoped reset, especially multi-function devices.
This breaks the majority of uses cases where vfio-pci uses bus/slot resets
to manage multifunction devices that do not support function scoped resets.
Fixes: 479380efe162 ("PCI: Avoid reset when disabled via sysfs")
Reported-by: Cal Peake <cp@absolutedigital.net>
Closes: https://lore.kernel.org/all/808e1111-27b7-f35b-6d5c-5b275e73677b@absolutedigital.net
Reported-by: Athul Krishna <athul.krishna.kr@protonmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220010
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250414211828.3530741-1-alex.williamson@redhat.com
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
On malfunctioning hardware, timeout error messages can appear thousands
of times, creating unnecessary system pressure and log bloat. This patch
makes two improvements:
1. Replace dev_err() with dev_err_ratelimited() to prevent log flooding
when hardware errors persist
2. Remove the redundant timeout value parameter from the error message,
as 'ret' is always zero in this error path
These changes reduce logging overhead while maintaining necessary error
reporting for debugging purposes.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250401-tegra-v2-2-126c293ec047@debian.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Some machines with tegra_qspi_combined_seq_xfer hardware issues generate
excessive kernel warnings, severely polluting the logs:
dmesg | grep -i "WARNING:.*tegra_qspi_transfer_one_message" | wc -l
94451
This patch replaces WARN_ON with WARN_ON_ONCE for timeout conditions to
reduce log spam. The subsequent error message still prints on each
occurrence, providing sufficient information about the failure, while
the stack trace is only needed once for debugging purposes.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250401-tegra-v2-1-126c293ec047@debian.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Let users know if incompatible features aren't enabled
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
extent poisoning is partly so that we don't keep spewing the dmesg log
when we've got unreadable data - we don't want to print these.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fixes from Borislav Petkov:
"Two fixes to the AMD translation library for the MI300 side of things:
- Use the row[13] bit when calculating the memory row to retire
- Mask the physical row address in order to avoid creating duplicate
error records"
* tag 'edac_urgent_for_v6.15_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
RAS/AMD/FMPM: Get masked address
RAS/AMD/ATL: Include row[13] bit in row retirement
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull isofs fix from Jan Kara:
"Fix a case where isofs could be reading beyond end of the passed
file handle if its type was incorrectly set"
* tag 'fs_for_v6.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
isofs: Prevent the use of too small fid
|
|
When ngbe_sw_init() is called, memory is allocated for wx->rss_key
in wx_init_rss_key(). However, in ngbe_probe() function, the subsequent
error paths after ngbe_sw_init() don't free the rss_key. Fix that by
freeing it in error path along with wx->mac_table.
Also change the label to which execution jumps when ngbe_sw_init()
fails, because otherwise, it could lead to a double free for rss_key,
when the mac_table allocation fails in wx_sw_init().
Fixes: 02338c484ab6 ("net: ngbe: Initialize sw info and register netdev")
Signed-off-by: Abdun Nihaal <abdun.nihaal@gmail.com>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/20250412154927.25908-1-abdun.nihaal@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Rename the "data" variable inside msi_wmi_platform_read() to avoid
a name collision when the driver adds support for a state container
struct (that is to be called "data" too) in the future.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20250414140453.7691-1-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Extend thermal control support to:
- Alienware Area-51m R2
- Alienware m16 R1
- Alienware m16 R2
- Dell G16 7630
- Dell G5 5505 SE
Cc: stable@vger.kernel.org
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250411-awcc-support-v1-2-09a130ec4560@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Some users report the Alienware m16 R1 models, support G-Mode. This was
manually verified by inspecting their ACPI tables.
Cc: stable@vger.kernel.org
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250411-awcc-support-v1-1-09a130ec4560@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
First get the devtype_data then check quirks.
Fixes: bbdffb341498 ("can: rockchip_canfd: add quirk for broken CAN-FD support")
Signed-off-by: Weizhao Ouyang <o451686892@gmail.com>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://patch.msgid.link/20250324114416.10160-1-o451686892@gmail.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Like other protocols on top of AF_CAN family, also j1939_proto.inuse_idx
needs to be decremented on socket dismantle.
Fixes: 6bffe88452db ("can: add protocol counter for AF_CAN sockets")
Reported-by: Oliver Hartkopp <socketcan@hartkopp.net>
Closes: https://lore.kernel.org/linux-can/7e35b13f-bbc4-491e-9081-fb939e1b8df0@hartkopp.net/
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/09ce71f281b9e27d1e3d1104430bf3fceb8c7321.1742292636.git.dcaratti@redhat.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
It's not safe to access nla_len(ovs_key) if the data is smaller than
the netlink header. Check that the attribute is OK first.
Fixes: ccb1352e76cf ("net: Add Open vSwitch kernel components.")
Reported-by: syzbot+b07a9da40df1576b8048@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=b07a9da40df1576b8048
Tested-by: syzbot+b07a9da40df1576b8048@syzkaller.appspotmail.com
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Reviewed-by: Eelco Chaudron <echaudro@redhat.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20250412104052.2073688-1-i.maximets@ovn.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
igc: Fix PTM timeout
Christopher S M Hall says:
There have been sporadic reports of PTM timeouts using i225/i226 devices
These timeouts have been root caused to:
1) Manipulating the PTM status register while PTM is enabled
and triggered
2) The hardware retrying too quickly when an inappropriate response
is received from the upstream device
The issue can be reproduced with the following:
$ sudo phc2sys -R 1000 -O 0 -i tsn0 -m
Note: 1000 Hz (-R 1000) is unrealistically large, but provides a way to
quickly reproduce the issue.
PHC2SYS exits with:
"ioctl PTP_OFFSET_PRECISE: Connection timed out" when the PTM transaction
fails
The first patch in this series also resolves an issue reported by Corinna
Vinschen relating to kdump:
This patch also fixes a hang in igc_probe() when loading the igc
driver in the kdump kernel on systems supporting PTM.
The igc driver running in the base kernel enables PTM trigger in
igc_probe(). Therefore the driver is always in PTM trigger mode,
except in brief periods when manually triggering a PTM cycle.
When a crash occurs, the NIC is reset while PTM trigger is enabled.
Due to a hardware problem, the NIC is subsequently in a bad busmaster
state and doesn't handle register reads/writes. When running
igc_probe() in the kdump kernel, the first register access to a NIC
register hangs driver probing and ultimately breaks kdump.
With this patch, igc has PTM trigger disabled most of the time,
and the trigger is only enabled for very brief (10 - 100 us) periods
when manually triggering a PTM cycle. Chances that a crash occurs
during a PTM trigger are not zero, but extremly reduced.
* '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
igc: add lock preventing multiple simultaneous PTM transactions
igc: cleanup PTP module if probe fails
igc: handle the IGC_PTP_ENABLED flag correctly
igc: move ktime snapshot into PTM retry loop
igc: increase wait time before retrying PTM
igc: fix PTM cycle trigger logic
====================
Link: https://patch.msgid.link/20250411162857.2754883-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
I have done quite some review on hugetlb code over the years, and some
work on it as well, the latest being the hugetlb pagewalk unification
which is a work in progress, and touches hugetlb code to great lengths.
HugeTLB does not have many reviewers, so I would like to help out by
offering myself as an official Reviewer.
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Link: https://lkml.kernel.org/r/20250409082452.269180-1-osalvador@suse.de
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Muchun Song <muchun.song@linux.dev>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
We started generating C code for OvS a while back, but actually
C codegen only supports fixed headers specified at the family
level right now (schema also allows specifying them per op).
ovs_flow and ovs_datapath already specify the fixed header
at the family level but ovs_vport does it per op.
Move the property, all ops use the same header.
This ensures YNL C sees the correct hdr_len:
const struct ynl_family ynl_ovs_vport_family = {
.name = "ovs_vport",
- .hdr_len = sizeof(struct genlmsghdr),
+ .hdr_len = sizeof(struct genlmsghdr) + sizeof(struct ovs_header),
};
Fixes: 7c59c9c8f202 ("tools: ynl: generate code for ovs families")
Link: https://patch.msgid.link/20250409145541.580674-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Lockdep found the following dependency:
&dev_instance_lock_key#3 -->
&rdev->wiphy.mtx -->
&net->xdp.lock -->
&xs->mutex -->
&dev_instance_lock_key#3
The first dependency is the problem. wiphy mutex should be outside
the instance locks. The problem happens in notifiers (as always)
for CLOSE. We only hold the instance lock for ops locked devices
during CLOSE, and WiFi netdevs are not ops locked. Unfortunately,
when we dev_close_many() during netns dismantle we may be holding
the instance lock of _another_ netdev when issuing a CLOSE for
a WiFi device.
Lockdep's "Possible unsafe locking scenario" only prints 3 locks
and we have 4, plus I think we'd need 3 CPUs, like this:
CPU0 CPU1 CPU2
---- ---- ----
lock(&xs->mutex);
lock(&dev_instance_lock_key#3);
lock(&rdev->wiphy.mtx);
lock(&net->xdp.lock);
lock(&xs->mutex);
lock(&rdev->wiphy.mtx);
lock(&dev_instance_lock_key#3);
Tho, I don't think that's possible as CPU1 and CPU2 would
be under rtnl_lock. Even if we have per-netns rtnl_lock and
wiphy can span network namespaces - CPU0 and CPU1 must be
in the same netns to see dev_instance_lock, so CPU0 can't
be installing a socket as CPU1 is tearing the netns down.
Regardless, our expected lock ordering is that wiphy lock
is taken before instance locks, so let's fix this.
Go over the ops locked and non-locked devices separately.
Note that calling dev_close_many() on an empty list is perfectly
fine. All processing (including RCU syncs) are conditional
on the list not being empty, already.
Fixes: 7e4d784f5810 ("net: hold netdev instance lock during rtnetlink operations")
Reported-by: syzbot+6f588c78bf765b62b450@syzkaller.appspotmail.com
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250412233011.309762-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull rdma fixes from Jason Gunthorpe:
- Fix hang in bnxt_re due to miscomputing the budget
- Avoid a -Wformat-security message in dev_set_name()
- Avoid an unused definition warning in fs.c with some kconfigs
- Fix error handling in usnic and remove IS_ERR_OR_NULL() usage
- Regression in RXE support foudn by blktests due to missing ODP
exclusions
- Set the dma_segment_size on HNS so it doesn't corrupt DMA when using
very large IOs
- Move a INIT_WORK to near when the work is allocated in cm.c to fix a
racey crash where work in progress was being init'd
- Use __GFP_NOWARN to not dump in kvcalloc() if userspace requests a
very big MR
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/bnxt_re: Remove unusable nq variable
RDMA/core: Silence oversized kvmalloc() warning
RDMA/cma: Fix workqueue crash in cma_netevent_work_handler
RDMA/hns: Fix wrong maximum DMA segment size
RDMA/rxe: Fix null pointer dereference in ODP MR check
RDMA/mlx5: Fix compilation warning when USER_ACCESS isn't set
RDMA/usnic: Fix passing zero to PTR_ERR in usnic_ib_pci_probe()
RDMA/ucaps: Avoid format-security warning
RDMA/bnxt_re: Fix budget handling of notification queue
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Fix NULL pointer dereference in virtiofs
- Fix slab OOB access in hfs/hfsplus
- Only create /proc/fs/netfs when CONFIG_PROC_FS is set
- Fix getname_flags() to initialize pointer correctly
- Convert dentry flags to enum
- Don't allow datadir without lowerdir in overlayfs
- Use namespace_{lock,unlock} helpers in dissolve_on_fput() instead of
plain namespace_sem so unmounted mounts are properly cleaned up
- Skip unnecessary ifs_block_is_uptodate check in iomap
- Remove an unused forward declaration in overlayfs
- Fix devpts uid/gid handling after converting to the new mount api
- Fix afs_dynroot_readdir() to not use the RCU read lock
- Fix mount_setattr() and open_tree_attr() to not pointlessly do path
lookup or walk the mount tree if no mount option change has been
requested
* tag 'vfs-6.15-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: use namespace_{lock,unlock} in dissolve_on_fput()
iomap: skip unnecessary ifs_block_is_uptodate check
fs: Fix filename init after recent refactoring
netfs: Only create /proc/fs/netfs with CONFIG_PROC_FS
mount: ensure we don't pointlessly walk the mount tree
dcache: convert dentry flag macros to enum
afs: Fix afs_dynroot_readdir() to not use the RCU read lock
hfs/hfsplus: fix slab-out-of-bounds in hfs_bnode_read_key
virtiofs: add filesystem context source name check
devpts: Fix type for uid and gid params
ovl: remove unused forward declaration
ovl: don't allow datadir only
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools fixes from Namhyung Kim:
"A couple of fixes and the usual tooling header updates:
- fix a build error on ARM64 when libunwind is requested
- fix an infinite loop with branch stack on AMD Zen3
- sync tooling headers with the kernel source"
* tag 'perf-tools-fixes-for-v6.15-2025-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
perf tools: Remove evsel__handle_error_quirks()
perf libunwind arm64: Fix missing close parens in an if statement
tools headers: Update the arch/x86/lib/memset_64.S copy with the kernel sources
tools headers: Update the x86 headers with the kernel sources
tools headers: Update the linux/unaligned.h copy with the kernel sources
tools headers: Update the uapi/asm-generic/mman-common.h copy with the kernel sources
tools headers: Update the uapi/linux/prctl.h copy with the kernel sources
tools headers: Update the syscall table with the kernel sources
tools headers: Update the VFS headers with the kernel sources
tools headers: Update the uapi/linux/perf_event.h copy with the kernel sources
tools headers: Update the socket headers with the kernel sources
tools headers: Update the KVM headers with the kernel sources
|
|
Typically pdev->irq is consistent with whether the device itself
supports INTx, where device support is reported via the PIN register.
Therefore the PIN register is often already zero if pdev->irq is zero.
Recently virtualization of the PIN register was expanded to include
the case where the device supports INTx but the platform does not
route the interrupt. This is reported by a value of IRQ_NOTCONNECTED
on some architectures. Other architectures just report zero for
pdev->irq.
We already disallow INTx setup if pdev->irq is zero, therefore add
this to the PIN register virtualization criteria so that a consistent
view is provided to userspace through virtualized config space and
ioctls.
Reported-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Link: https://lore.kernel.org/all/174231895238.2295.12586708771396482526.stgit@linux.ibm.com/
Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Link: https://lore.kernel.org/r/20250320194145.2816379-1-alex.williamson@redhat.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Set use_gpio_descriptors to true so that GPIOs can be used for chip
select in accordance with the DT binding.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250410115303.5150-1-mans@mansr.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
ktest recently reported crashes while running several buffered io tests
with __alloc_tagging_slab_alloc_hook() at the top of the crash call stack.
The signature indicates an invalid address dereference with low bits of
slab->obj_exts being set. The bits were outside of the range used by
page_memcg_data_flags and objext_flags and hence were not masked out
by slab_obj_exts() when obtaining the pointer stored in slab->obj_exts.
The typical crash log looks like this:
00510 Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010
00510 Mem abort info:
00510 ESR = 0x0000000096000045
00510 EC = 0x25: DABT (current EL), IL = 32 bits
00510 SET = 0, FnV = 0
00510 EA = 0, S1PTW = 0
00510 FSC = 0x05: level 1 translation fault
00510 Data abort info:
00510 ISV = 0, ISS = 0x00000045, ISS2 = 0x00000000
00510 CM = 0, WnR = 1, TnD = 0, TagAccess = 0
00510 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
00510 user pgtable: 4k pages, 39-bit VAs, pgdp=0000000104175000
00510 [0000000000000010] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000
00510 Internal error: Oops: 0000000096000045 [#1] SMP
00510 Modules linked in:
00510 CPU: 10 UID: 0 PID: 7692 Comm: cat Not tainted 6.15.0-rc1-ktest-g189e17946605 #19327 NONE
00510 Hardware name: linux,dummy-virt (DT)
00510 pstate: 20001005 (nzCv daif -PAN -UAO -TCO -DIT +SSBS BTYPE=--)
00510 pc : __alloc_tagging_slab_alloc_hook+0xe0/0x190
00510 lr : __kmalloc_noprof+0x150/0x310
00510 sp : ffffff80c87df6c0
00510 x29: ffffff80c87df6c0 x28: 000000000013d1ff x27: 000000000013d200
00510 x26: ffffff80c87df9e0 x25: 0000000000000000 x24: 0000000000000001
00510 x23: ffffffc08041953c x22: 000000000000004c x21: ffffff80c0002180
00510 x20: fffffffec3120840 x19: ffffff80c4821000 x18: 0000000000000000
00510 x17: fffffffec3d02f00 x16: fffffffec3d02e00 x15: fffffffec3d00700
00510 x14: fffffffec3d00600 x13: 0000000000000200 x12: 0000000000000006
00510 x11: ffffffc080bb86c0 x10: 0000000000000000 x9 : ffffffc080201e58
00510 x8 : ffffff80c4821060 x7 : 0000000000000000 x6 : 0000000055555556
00510 x5 : 0000000000000001 x4 : 0000000000000010 x3 : 0000000000000060
00510 x2 : 0000000000000000 x1 : ffffffc080f50cf8 x0 : ffffff80d801d000
00510 Call trace:
00510 __alloc_tagging_slab_alloc_hook+0xe0/0x190 (P)
00510 __kmalloc_noprof+0x150/0x310
00510 __bch2_folio_create+0x5c/0xf8
00510 bch2_folio_create+0x2c/0x40
00510 bch2_readahead+0xc0/0x460
00510 read_pages+0x7c/0x230
00510 page_cache_ra_order+0x244/0x3a8
00510 page_cache_async_ra+0x124/0x170
00510 filemap_readahead.isra.0+0x58/0xa0
00510 filemap_get_pages+0x454/0x7b0
00510 filemap_read+0xdc/0x418
00510 bch2_read_iter+0x100/0x1b0
00510 vfs_read+0x214/0x300
00510 ksys_read+0x6c/0x108
00510 __arm64_sys_read+0x20/0x30
00510 invoke_syscall.constprop.0+0x54/0xe8
00510 do_el0_svc+0x44/0xc8
00510 el0_svc+0x18/0x58
00510 el0t_64_sync_handler+0x104/0x130
00510 el0t_64_sync+0x154/0x158
00510 Code: d5384100 f9401c01 b9401aa3 b40002e1 (f8227881)
00510 ---[ end trace 0000000000000000 ]---
00510 Kernel panic - not syncing: Oops: Fatal exception
00510 SMP: stopping secondary CPUs
00510 Kernel Offset: disabled
00510 CPU features: 0x0000,000000e0,00000410,8240500b
00510 Memory Limit: none
Investigation indicates that these bits are already set when we allocate
slab page and are not zeroed out after allocation. We are not yet sure
why these crashes start happening only recently but regardless of the
reason, not initializing a field that gets used later is wrong. Fix it
by initializing slab->obj_exts during slab page allocation.
Fixes: 21c690a349ba ("mm: introduce slabobj_ext to support slab object extensions")
Reported-by: Kent Overstreet <kent.overstreet@linux.dev>
Tested-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Acked-by: Kent Overstreet <kent.overstreet@linux.dev>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250411155737.1360746-1-surenb@google.com
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Prior to commit e614a00117bc2d, xmbuf_map_backing_mem relied on
folio_file_page to return the base page for the xmbuf's loff_t in the
xfile, and set b_addr to the page_address of that base page.
Now that folio_file_page has been removed from xmbuf_map_backing_mem, we
always set b_addr to the folio_address of the folio. This is correct
for the situation where the folio size matches the buffer size, but it's
totally wrong if tmpfs uses large folios. We need to use
offset_in_folio here.
Found via xfs/801, which demonstrated evidence of corruption of an
in-memory rmap btree block right after initializing an adjacent block.
Fixes: e614a00117bc2d ("xfs: cleanup mapping tmpfs folios into the buffer cache")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
Presently we start garbage collection late - when we start running
out of free zones to backfill max_open_zones. This is a reasonable
default as it minimizes write amplification. The longer we wait,
the more blocks are invalidated and reclaim cost less in terms
of blocks to relocate.
Starting this late however introduces a risk of GC being outcompeted
by user writes. If GC can't keep up, user writes will be forced to
wait for free zones with high tail latencies as a result.
This is not a problem under normal circumstances, but if fragmentation
is bad and user write pressure is high (multiple full-throttle
writers) we will "bottom out" of free zones.
To mitigate this, introduce a zonegc_low_space tunable that lets the
user specify a percentage of how much of the unused space that GC
should keep available for writing. A high value will reclaim more of
the space occupied by unused blocks, creating a larger buffer against
write bursts.
This comes at a cost as write amplification is increased. To
illustrate this using a sample workload, setting zonegc_low_space to
60% avoids high (500ms) max latencies while increasing write
amplification by 15%.
Signed-off-by: Hans Holmberg <hans.holmberg@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
xfs_buf_free can call vunmap, which can sleep. The vunmap path is an
unlikely one, so add might_sleep to ensure calling xfs_buf_free from
atomic context gets caught more easily.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
Marking a log item as failed kept a buffer reference around for
resubmission of inode and dquote items.
For inode items commit 298f7bec503f3 ("xfs: pin inode backing buffer to
the inode log item") started pinning the inode item buffers
unconditionally and removed the need for this. Later commit acc8f8628c37
("xfs: attach dquot buffer to dquot log item buffer") did the same for
dquot items but didn't fully clean up the xfs_clear_li_failed side
for them. Stop adding the extra pin for dquot items and remove the
helpers.
This happens to fix a call to xfs_buf_free with the AIL lock held,
which would be incorrect for the unlikely case freeing the buffer
ends up calling vfree.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
This will likely mean that the btree had only one node - there was
nothing or almost nothing in it, and we should reconstruct and continue.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
|
