summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-10-10GPIO: add single-register GPIO via CREG driverEugeniy Paltsev
Add single-register MMIO GPIO driver for complex cases where only several fields in register belong to GPIO lines and each GPIO line owns a field with different length and on/off value. Such CREG GPIOs are used in Synopsys AXS10x and HSDK boards. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-10-10dt-bindings: Document the Synopsys GPIO via CREG bindingsEugeniy Paltsev
This patch adds documentation of device tree bindings for the Synopsys GPIO via CREG driver. Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-10-10pinctrl: bcm: add Northstar driverRafał Miłecki
This driver provides support for Northstar mux controller. It differs from Northstar Plus one so a new binding and driver were needed. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-10-10dt-bindings: pinctrl: document Broadcom Northstar pin mux controllerRafał Miłecki
Northstar has mux controller just like Northstar Plus and Northstar2. It's a bit different though (different registers & pins) so it requires its own binding. It's needed to allow other block bindings specify required mux setup. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-10-10ALSA: hda/realtek - Fix the problem of the front MIC on the Lenovo M715Hui Wang
The front MIC on the Lenovo M715 can't record sound, after applying the ALC294_FIXUP_LENOVO_MIC_LOCATION, the problem is fixed. So add the pin configuration of this machine to the pin quirk table. Cc: <stable@vger.kernel.org> Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-10Merge tag 'tag-chrome-platform-fixes-for-v4.19-rc8' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform Benson writes: "chrome-platform fix for v4.19-rc8 This contains a fix to 57e94c8b974d ("mfd: cros-ec: Increase maximum mkbp event size"), which caused cros_ec based chromebooks to truncate an entire column of their built-in keyboard." * tag 'tag-chrome-platform-fixes-for-v4.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform: mfd: cros-ec: copy the whole event in get_next_event_xfer
2018-10-10Merge branch 'for-4.19-fixes' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu Dennis writes: "percpu fixes for-4.19-rc8 The new percpu allocator introduced in 4.14 had a missing free for the percpu metadata. This caused a memory leak when percpu memory is being churned resulting in the allocation and deallocation of percpu memory chunks" * 'for-4.19-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu: percpu: stop leaking bitmap metadata blocks
2018-10-10Merge tag 'gfs2-4.19.fixes2' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2 Andreas writes: "gfs2 4.19 fix: This fixes a regression introduced in commit 64bc06bb32ee "gfs2: iomap buffered write support"" * tag 'gfs2-4.19.fixes2' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: gfs2: Fix iomap buffered write support for journaled files
2018-10-10Merge tag 's390-4.19-4' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Martin writes: "s390 fixes for 4.19-rc8 Four more patches for 4.19: - Fix resume after suspend-to-disk if resume-CPU != suspend-CPU - Fix vfio-ccw check for pinned pages - Two patches to avoid a usercopy-whitelist warning in vfio-ccw" * tag 's390-4.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/cio: Fix how vfio-ccw checks pinned pages s390/cio: Refactor alloc of ccw_io_region s390/cio: Convert ccw_io_region to pointer s390/hibernate: fix error handling when suspend cpu != resume cpu
2018-10-10Merge tag 'mips_fixes_4.19_2' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Paul writes: "A few MIPS fixes for 4.19: - Avoid suboptimal placement of our VDSO when using the legacy mmap layout, which can prevent statically linked programs that were able to allocate large amounts of memory using the brk syscall prior to the introduction of our VDSO from functioning correctly. - Fix up CONFIG_CMDLINE handling for platforms which ought to ignore DT arguments but have incorrectly used them & lost other arguments since v3.16. - Fix a path in MAINTAINERS to use valid wildcards. - Fixup a regression from v4.17 in memset() for systems using CPU_DADDI_WORKAROUNDS." * tag 'mips_fixes_4.19_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: memset: Fix CPU_DADDI_WORKAROUNDS `small_fixup' regression MAINTAINERS: MIPS/LOONGSON2 ARCHITECTURE - Use the normal wildcard style MIPS: Fix CONFIG_CMDLINE handling MIPS: VDSO: Always map near top of user memory
2018-10-10x86/defconfig: Enable CONFIG_USB_XHCI_HCD=yAdam Borowski
A spanking new machine I just got has all but one USB ports wired as 3.0. Booting defconfig resulted in no keyboard or mouse, which was pretty uncool. Let's enable that -- USB3 is ubiquitous rather than an oddity. As 'y' not 'm' -- recovering from initrd problems needs a keyboard. Also add it to the 32-bit defconfig. Signed-off-by: Adam Borowski <kilobyte@angband.pl> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-usb@vger.kernel.org Link: http://lkml.kernel.org/r/20181009062803.4332-1-kilobyte@angband.pl Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-10-10MAINTAINERS: update the SELinux mailing list locationPaul Moore
Signed-off-by: Paul Moore <paul@paul-moore.com>
2018-10-10s390/mem_detect: add missing includeHeiko Carstens
Fix this allnoconfig build breakage: arch/s390/boot/mem_detect.c: In function 'tprot': arch/s390/boot/mem_detect.c:122:12: error: 'EFAULT' undeclared (first use in this function) Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-10-10s390/dumpstack: print psw mask and address againHeiko Carstens
With pointer obfuscation the output of show_registers() became quite useless: Krnl PSW : (____ptrval____) (____ptrval____) (__list_add_valid+0x98/0xa8) In order to print the psw mask and address use %px instead of %p. And the output looks again like this: Krnl PSW : 0404d00180000000 00000000007c0dd0 (__list_add_valid+0x98/0xa8) Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-10-10s390/crypto: Enhance paes cipher to accept variable length key materialIngo Franzki
Enhance the paes_s390 kernel module to allow the paes cipher to accept variable length key material. The key material accepted by the paes cipher is a key blob of various types. As of today, two key blob types are supported: CCA secure key blobs and protected key blobs. Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com> Reviewed-by: Harald Freudenberger <freude@linux.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-10-10s390/pkey: Introduce new API for transforming key blobsIngo Franzki
Introduce a new ioctl API and in-kernel API to transform a variable length key blob of any supported type into a protected key. Transforming a secure key blob uses the already existing function pkey_sec2protk(). Transforming a protected key blob also verifies if the protected key is still valid. If not, -ENODEV is returned. Both APIs are described in detail in the header files arch/s390/include/asm/pkey.h and arch/s390/include/uapi/asm/pkey.h. Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com> Reviewed-by: Harald Freudenberger <freude@linux.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-10-10s390/pkey: Introduce new API for random protected key verificationIngo Franzki
Introduce a new ioctl API and in-kernel API to verify if a random protected key is still valid. A protected key is invalid when its wrapping key verification pattern does not match the verification pattern of the LPAR. Each time an LPAR is activated, a new LPAR wrapping key is generated and the wrapping key verification pattern is updated. Both APIs are described in detail in the header files arch/s390/include/asm/pkey.h and arch/s390/include/uapi/asm/pkey.h. Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com> Reviewed-by: Harald Freudenberger <freude@linux.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-10-10s390/pkey: Add sysfs attributes to emit secure key blobsIngo Franzki
Add binary read-only sysfs attributes for the pkey module that can be used to read random ccadata secure keys from. Keys are read from these attributes using a cat-like interface. A typical use case for those keys is to encrypt a swap device using the paes cipher. During processing of /etc/crypttab, the random random ccadata secure key to encrypt the swap device is read from one of the attributes. The following attributes are added: ccadata/aes_128 ccadata/aes_192 ccadata/aes_256 ccadata/aes_128_xts ccadata/aes_256_xts Each attribute emits a secure key blob for the corresponding key size and cipher mode. Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com> Reviewed-by: Harald Freudenberger <freude@linux.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-10-10s390/pkey: Add sysfs attributes to emit protected key blobsIngo Franzki
Add binary read-only sysfs attributes for the pkey module that can be used to read random protected keys from. Keys are read from these attributes using a cat-like interface. A typical use case for those keys is to encrypt a swap device using the paes cipher. During processing of /etc/crypttab, the random protected key to encrypt the swap device is read from one of the attributes. The following attributes are added: protkey/aes_128 protkey/aes_192 protkey/aes_256 protkey/aes_128_xts protkey/aes_256_xts Each attribute emits a protected key blob for the corresponding key size and cipher mode. Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com> Reviewed-by: Harald Freudenberger <freude@linux.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-10-09tools/bpf: use proper type and uapi perf_event.h header for libbpfYonghong Song
Use __u32 instead u32 in libbpf.c and also use uapi perf_event.h instead of tools/perf/perf-sys.h. Signed-off-by: Yonghong Song <yhs@fb.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-09Merge branch 'xdp-vlan'Alexei Starovoitov
Jesper Dangaard Brouer says: ==================== While implementing PoC building blocks for eBPF code XDP+TC that can manipulate VLANs headers, I discovered a bug in generic-XDP. The fix should be backported to stable kernels. Even-though generic-XDP was introduced in v4.12, I think the bug is not exposed until v4.14 in the mentined fixes commit. ==================== Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-09selftests/bpf: add XDP selftests for modifying and popping VLAN headersJesper Dangaard Brouer
This XDP selftest also contain a small TC-bpf component. It provoke the generic-XDP bug fixed in previous commit. The selftest itself shows how to do VLAN manipulation from XDP and TC. The test demonstrate how XDP ingress can remove a VLAN tag, and how TC egress can add back a VLAN tag. This use-case originates from a production need by ISP (kviknet.dk), who gets DSL-lines terminated as VLAN Q-in-Q tagged packets, and want to avoid having an net_device for every end-customer on the box doing the L2 to L3 termination. The test-setup is done via a veth-pair and creating two network namespaces (ns1 and ns2). The 'ns1' simulate the ISP network that are loading the BPF-progs stripping and adding VLAN IDs. The 'ns2' simulate the DSL-customer that are using VLAN tagged packets. Running the script with --interactive, will simply not call the cleanup function. This gives the effect of creating a testlab, that the users can inspect and play with. The --verbose option will simply request that the shell will print input lines as they are read, this include comments, which in effect make the comments visible docs. Reported-by: Yoel Caspersen <yoel@kviknet.dk> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-09bpf: make TC vlan bpf_helpers avail to selftestsJesper Dangaard Brouer
The helper bpf_skb_vlan_push is needed by next patch, and the helper bpf_skb_vlan_pop is added for completeness, regarding VLAN helpers. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-09net: fix generic XDP to handle if eth header was mangledJesper Dangaard Brouer
XDP can modify (and resize) the Ethernet header in the packet. There is a bug in generic-XDP, because skb->protocol and skb->pkt_type are setup before reaching (netif_receive_)generic_xdp. This bug was hit when XDP were popping VLAN headers (changing eth->h_proto), as skb->protocol still contains VLAN-indication (ETH_P_8021Q) causing invocation of skb_vlan_untag(skb), which corrupt the packet (basically popping the VLAN again). This patch catch if XDP changed eth header in such a way, that SKB fields needs to be updated. V2: on request from Song Liu, use ETH_HLEN instead of mac_len, in __skb_push() as eth_type_trans() use ETH_HLEN in paired skb_pull_inline(). Fixes: d445516966dc ("net: xdp: support xdp generic on virtual devices") Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-09Merge branch 'unsupported-map-lookup'Alexei Starovoitov
Prashant Bhole says: ==================== Currently when map a lookup fails, user space API can not make any distinction whether given key was not found or lookup is not supported by particular map. In this series we modify return value of maps which do not support lookup. Lookup on such map implementation will return -EOPNOTSUPP. bpf() syscall with BPF_MAP_LOOKUP_ELEM command will set EOPNOTSUPP errno. We also handle this error in bpftool to print appropriate message. Patch 1: adds handling of BPF_MAP_LOOKUP ELEM command of bpf syscall such that errno will set to EOPNOTSUPP when map doesn't support lookup Patch 2: Modifies the return value of map_lookup_elem() to EOPNOTSUPP for maps which do not support lookup Patch 3: Splits do_dump() in bpftool/map.c. Element printing code is moved out into new function dump_map_elem(). This was done in order to reduce deep indentation and accomodate further changes. Patch 4: Changes in bpftool to print strerror() message when lookup error is occured. This will result in appropriate message like "Operation not supported" when map doesn't support lookup. Patch 5: test_verifier: change fixup map naming convention as suggested by Alexei Patch 6: Added verifier tests to check whether verifier rejects call to bpf_map_lookup_elem from bpf program. For all map types those do not support map lookup. ==================== Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-09selftests/bpf: test_verifier, check bpf_map_lookup_elem access in bpf progPrashant Bhole
map_lookup_elem isn't supported by certain map types like: - BPF_MAP_TYPE_PROG_ARRAY - BPF_MAP_TYPE_STACK_TRACE - BPF_MAP_TYPE_XSKMAP - BPF_MAP_TYPE_SOCKMAP/BPF_MAP_TYPE_SOCKHASH Let's add verfier tests to check whether verifier prevents bpf_map_lookup_elem call on above programs from bpf program. Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-09selftests/bpf: test_verifier, change names of fixup mapsPrashant Bhole
Currently fixup map are named like fixup_map1, fixup_map2, and so on. As suggested by Alexei let's change change map names such that we can identify map type by looking at the name. This patch is basically a find and replace change: fixup_map1 -> fixup_map_hash_8b fixup_map2 -> fixup_map_hash_48b fixup_map3 -> fixup_map_hash_16b fixup_map4 -> fixup_map_array_48b Suggested-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-09tools/bpf: bpftool, print strerror when map lookup error occursPrashant Bhole
Since map lookup error can be ENOENT or EOPNOTSUPP, let's print strerror() as error message in normal and JSON output. This patch adds helper function print_entry_error() to print entry from lookup error occurs Example: Following example dumps a map which does not support lookup. Output before: root# bpftool map -jp dump id 40 [ "key": ["0x0a","0x00","0x00","0x00" ], "value": { "error": "can\'t lookup element" }, "key": ["0x0b","0x00","0x00","0x00" ], "value": { "error": "can\'t lookup element" } ] root# bpftool map dump id 40 can't lookup element with key: 0a 00 00 00 can't lookup element with key: 0b 00 00 00 Found 0 elements Output after changes: root# bpftool map dump -jp id 45 [ "key": ["0x0a","0x00","0x00","0x00" ], "value": { "error": "Operation not supported" }, "key": ["0x0b","0x00","0x00","0x00" ], "value": { "error": "Operation not supported" } ] root# bpftool map dump id 45 key: 0a 00 00 00 value: Operation not supported key: 0b 00 00 00 value: Operation not supported Found 0 elements Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-09tools/bpf: bpftool, split the function do_dump()Prashant Bhole
do_dump() function in bpftool/map.c has deep indentations. In order to reduce deep indent, let's move element printing code out of do_dump() into dump_map_elem() function. Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-09bpf: return EOPNOTSUPP when map lookup isn't supportedPrashant Bhole
Return ERR_PTR(-EOPNOTSUPP) from map_lookup_elem() methods of below map types: - BPF_MAP_TYPE_PROG_ARRAY - BPF_MAP_TYPE_STACK_TRACE - BPF_MAP_TYPE_XSKMAP - BPF_MAP_TYPE_SOCKMAP/BPF_MAP_TYPE_SOCKHASH Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-09bpf: error handling when map_lookup_elem isn't supportedPrashant Bhole
The error value returned by map_lookup_elem doesn't differentiate whether lookup was failed because of invalid key or lookup is not supported. Lets add handling for -EOPNOTSUPP return value of map_lookup_elem() method of map, with expectation from map's implementation that it should return -EOPNOTSUPP if lookup is not supported. The errno for bpf syscall for BPF_MAP_LOOKUP_ELEM command will be set to EOPNOTSUPP if map lookup is not supported. Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-09bpf: btf: Fix a missing check bugWenwen Wang
In btf_parse_hdr(), the length of the btf data header is firstly copied from the user space to 'hdr_len' and checked to see whether it is larger than 'btf_data_size'. If yes, an error code EINVAL is returned. Otherwise, the whole header is copied again from the user space to 'btf->hdr'. However, after the second copy, there is no check between 'btf->hdr->hdr_len' and 'hdr_len' to confirm that the two copies get the same value. Given that the btf data is in the user space, a malicious user can race to change the data between the two copies. By doing so, the user can provide malicious data to the kernel and cause undefined behavior. This patch adds a necessary check after the second copy, to make sure 'btf->hdr->hdr_len' has the same value as 'hdr_len'. Otherwise, an error code EINVAL will be returned. Signed-off-by: Wenwen Wang <wang6495@umn.edu> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-09mfd: cros-ec: copy the whole event in get_next_event_xferEmil Karlson
Commit 57e94c8b974db2d83c60e1139c89a70806abbea0 caused cros-ec keyboard events be truncated on many chromebooks so that Left and Right keys on Column 12 were always 0. Use ret as memcpy len to fix this. The old code was using ec_dev->event_size, which is the event payload/data size excluding event_type header, for the length of the memcpy operation. Use ret as memcpy length to avoid the off by one and copy the whole msg->data. Fixes: 57e94c8b974d ("mfd: cros-ec: Increase maximum mkbp event size") Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by: Emil Renner Berthing <kernel@esmil.dk> Signed-off-by: Emil Karlson <jekarlson@gmail.com> Signed-off-by: Benson Leung <bleung@chromium.org>
2018-10-09ecryptfs_rename(): verify that lower dentries are still OK after lock_rename()Al Viro
We get lower layer dentries, find their parents, do lock_rename() and proceed to vfs_rename(). However, we do not check that dentries still have the same parents and are not unlinked. Need to check that... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-10-09sparc: Wire up io_pgetevents system call.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-10HID: google: add dependency on Cros EC for HammerDmitry Torokhov
Whiskers tablet mode support needs access to Chrome Embedded Controller, so we need to add dependency on MFD_CROS_EC. Reported-by: kbuild test robot <lkp@intel.com> Fixes: eb1aac4c8744 ("HID: google: add support tablet mode switch for Whiskers") Signed-off-by: Dmitry Torokhov <dtor@chromium.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-10-09security: fix LSM description locationRandy Dunlap
Acked-by: Kees Cook <keescook@chromium.org> Fix Documentation location reference for where LSM descriptions should be placed. Suggested-by: Kees Cook <keescook@chromium.org> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: James Morris <jmorris@namei.org> Cc: "Serge E. Hallyn" <serge@hallyn.com> Cc: linux-security-module@vger.kernel.org Signed-off-by: James Morris <james.morris@microsoft.com>
2018-10-09mm: Preserve _PAGE_DEVMAP across mprotect() callsJan Kara
Currently _PAGE_DEVMAP bit is not preserved in mprotect(2) calls. As a result we will see warnings such as: BUG: Bad page map in process JobWrk0013 pte:800001803875ea25 pmd:7624381067 addr:00007f0930720000 vm_flags:280000f9 anon_vma: (null) mapping:ffff97f2384056f0 index:0 file:457-000000fe00000030-00000009-000000ca-00000001_2001.fileblock fault:xfs_filemap_fault [xfs] mmap:xfs_file_mmap [xfs] readpage: (null) CPU: 3 PID: 15848 Comm: JobWrk0013 Tainted: G W 4.12.14-2.g7573215-default #1 SLE12-SP4 (unreleased) Hardware name: Intel Corporation S2600WFD/S2600WFD, BIOS SE5C620.86B.01.00.0833.051120182255 05/11/2018 Call Trace: dump_stack+0x5a/0x75 print_bad_pte+0x217/0x2c0 ? enqueue_task_fair+0x76/0x9f0 _vm_normal_page+0xe5/0x100 zap_pte_range+0x148/0x740 unmap_page_range+0x39a/0x4b0 unmap_vmas+0x42/0x90 unmap_region+0x99/0xf0 ? vma_gap_callbacks_rotate+0x1a/0x20 do_munmap+0x255/0x3a0 vm_munmap+0x54/0x80 SyS_munmap+0x1d/0x30 do_syscall_64+0x74/0x150 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 ... when mprotect(2) gets used on DAX mappings. Also there is a wide variety of other failures that can result from the missing _PAGE_DEVMAP flag when the area gets used by get_user_pages() later. Fix the problem by including _PAGE_DEVMAP in a set of flags that get preserved by mprotect(2). Fixes: 69660fd797c3 ("x86, mm: introduce _PAGE_DEVMAP") Fixes: ebd31197931d ("powerpc/mm: Add devmap support for ppc64") Cc: <stable@vger.kernel.org> Signed-off-by: Jan Kara <jack@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-10-09dm: fix report zone remapping to account for partition offsetDamien Le Moal
If dm-linear or dm-flakey are layered on top of a partition of a zoned block device, remapping of the start sector and write pointer position of the zones reported by a report zones BIO must be modified to account for the target table entry mapping (start offset within the device and entry mapping with the dm device). If the target's backing device is a partition of a whole disk, the start sector on the physical device of the partition must also be accounted for when modifying the zone information. However, dm_remap_zone_report() was not considering this last case, resulting in incorrect zone information remapping with targets using disk partitions. Fix this by calculating the target backing device start sector using the position of the completed report zones BIO and the unchanged position and size of the original report zone BIO. With this value calculated, the start sector and write pointer position of the target zones can be correctly remapped. Fixes: 10999307c14e ("dm: introduce dm_remap_zone_report()") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-10-09cxgb4: Add thermal zone supportGanesh Goudar
Add thermal zone support to monitor ASIC's temperature. Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-09net/mlx4_en: Use minimal rx and tx ring sizes on kdump kernelAlaa Hleihel
When memory is limited (on kdump kernel), reduce size of rx and tx rings. Also reduce the number of rx rings. Signed-off-by: Alaa Hleihel <alaa@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-09dm cache: destroy migration_cache if cache target registration failedShenghui Wang
Commit 7e6358d244e47 ("dm: fix various targets to dm_register_target after module __init resources created") inadvertently introduced this bug when it moved dm_register_target() after the call to KMEM_CACHE(). Fixes: 7e6358d244e47 ("dm: fix various targets to dm_register_target after module __init resources created") Cc: stable@vger.kernel.org Signed-off-by: Shenghui Wang <shhuiw@foxmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-10-09Merge branch 'ena-fixes'David S. Miller
Arthur Kiyanovski says: ==================== minor bug fixes for ENA Ethernet driver Arthur Kiyanovski (4): net: ena: fix warning in rmmod caused by double iounmap net: ena: fix rare bug when failed restart/resume is followed by driver removal net: ena: fix NULL dereference due to untimely napi initialization net: ena: fix auto casting to boolean ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-09net: ena: fix auto casting to booleanArthur Kiyanovski
Eliminate potential auto casting compilation error. Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-09net: ena: fix NULL dereference due to untimely napi initializationArthur Kiyanovski
napi poll functions should be initialized before running request_irq(), to handle a rare condition where there is a pending interrupt, causing the ISR to fire immediately while the poll function wasn't set yet, causing a NULL dereference. Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-09net: ena: fix rare bug when failed restart/resume is followed by driver removalArthur Kiyanovski
In a rare scenario when ena_device_restore() fails, followed by device remove, an FLR will not be issued. In this case, the device will keep sending asynchronous AENQ keep-alive events, even after driver removal, leading to memory corruption. Fixes: 8c5c7abdeb2d ("net: ena: add power management ops to the ENA driver") Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-09net: ena: fix warning in rmmod caused by double iounmapArthur Kiyanovski
Memory mapped with devm_ioremap is automatically freed when the driver is disconnected from the device. Therefore there is no need to explicitly call devm_iounmap. Fixes: 0857d92f71b6 ("net: ena: add missing unmap bars on device removal") Fixes: 411838e7b41c ("net: ena: fix rare kernel crash when bar memory remap fails") Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-09EDAC, skx_edac: Fix logical channel intermediate decodingQiuxu Zhuo
The code "lchan = (lchan << 1) | ~lchan" for logical channel intermediate decoding is wrong. The wrong intermediate decoding result is {0xffffffff, 0xfffffffe}. Fix it by replacing '~' with '!'. The correct intermediate decoding result is {0x1, 0x2}. Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> CC: Aristeu Rozanski <aris@redhat.com> CC: Mauro Carvalho Chehab <mchehab@kernel.org> CC: linux-edac <linux-edac@vger.kernel.org> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20181009172025.18594-1-tony.luck@intel.com
2018-10-09Merge tag 'kvmarm-fixes-for-4.19-2' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master KVM/arm fixes for 4.19, take #2 - Correctly order GICv3 SGI registers in the cp15 array
2018-10-09KVM: x86: support CONFIG_KVM_AMD=y with CONFIG_CRYPTO_DEV_CCP_DD=mPaolo Bonzini
SEV requires access to the AMD cryptographic device APIs, and this does not work when KVM is builtin and the crypto driver is a module. Actually the Kconfig conditions for CONFIG_KVM_AMD_SEV try to disable SEV in that case, but it does not work because the actual crypto calls are not culled, only sev_hardware_setup() is. This patch adds two CONFIG_KVM_AMD_SEV checks that gate all the remaining SEV code; it fixes this particular configuration, and drops 5 KiB of code when CONFIG_KVM_AMD_SEV=n. Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-19 17:39:04 +0000