| Age | Commit message (Collapse) | Author |
|---|
|
hds.py has been testing 0(set_hds_thresh_zero()),
MAX(set_hds_thresh_max()), GT(set_hds_thresh_gt()) values for hds-thresh.
However if a hds-thresh value was already 0, set_hds_thresh_zero()
can't test properly.
So, it tests random value first and then tests 0, MAX, GT values.
Testing bnxt:
TAP version 13
1..13
ok 1 hds.get_hds
ok 2 hds.get_hds_thresh
ok 3 hds.set_hds_disable # SKIP disabling of HDS not supported by
the device
ok 4 hds.set_hds_enable
ok 5 hds.set_hds_thresh_random
ok 6 hds.set_hds_thresh_zero
ok 7 hds.set_hds_thresh_max
ok 8 hds.set_hds_thresh_gt
ok 9 hds.set_xdp
ok 10 hds.enabled_set_xdp
ok 11 hds.ioctl
ok 12 hds.ioctl_set_xdp
ok 13 hds.ioctl_enabled_set_xdp
# Totals: pass:12 fail:0 xfail:0 xpass:0 skip:1 error:0
Testing lo:
TAP version 13
1..13
ok 1 hds.get_hds # SKIP tcp-data-split not supported by device
ok 2 hds.get_hds_thresh # SKIP hds-thresh not supported by device
ok 3 hds.set_hds_disable # SKIP ring-set not supported by the device
ok 4 hds.set_hds_enable # SKIP ring-set not supported by the device
ok 5 hds.set_hds_thresh_random # SKIP hds-thresh not supported by
device
ok 6 hds.set_hds_thresh_zero # SKIP ring-set not supported by the
device
ok 7 hds.set_hds_thresh_max # SKIP hds-thresh not supported by
device
ok 8 hds.set_hds_thresh_gt # SKIP hds-thresh not supported by device
ok 9 hds.set_xdp # SKIP tcp-data-split not supported by device
ok 10 hds.enabled_set_xdp # SKIP tcp-data-split not supported by
device
ok 11 hds.ioctl # SKIP tcp-data-split not supported by device
ok 12 hds.ioctl_set_xdp # SKIP tcp-data-split not supported by
device
ok 13 hds.ioctl_enabled_set_xdp # SKIP tcp-data-split not supported
by device
# Totals: pass:0 fail:0 xfail:0 xpass:0 skip:13 error:0
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Link: https://patch.msgid.link/20250404122126.1555648-3-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
always as 0.
When hds-thresh is configured, ethnl_set_rings() is called, and it calls
ethtool_ringparam_get_cfg() to get ringparameters from .get_ringparam()
callback and dev->cfg.
Both hds_config and hds_thresh values should be set from dev->cfg, not
from .get_ringparam().
But ethtool_ringparam_get_cfg() sets only hds_config from dev->cfg.
So, ethtool_ringparam_get_cfg() returns always a hds_thresh as 0.
If an input value of hds-thresh is 0, a hds_thresh value from
ethtool_ringparam_get_cfg() are same. So ethnl_set_rings() does
nothing and returns immediately.
It causes a bug that setting a hds-thresh value to 0 is not working.
Reproducer:
modprobe netdevsim
echo 1 > /sys/bus/netdevsim/new_device
ethtool -G eth0 hds-thresh 100
ethtool -G eth0 hds-thresh 0
ethtool -g eth0
#hds-thresh value should be 0, but it shows 100.
The tools/testing/selftests/drivers/net/hds.py can test it too with
applying a following patch for hds.py.
Fixes: 928459bbda19 ("net: ethtool: populate the default HDS params in the core")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Link: https://patch.msgid.link/20250404122126.1555648-2-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When AC adapter is unplugged or plugged in EC wakes from HW sleep but
APU doesn't enter back into HW sleep.
The reason this happens is that, when the APU exits HW sleep, the power
rails controlled by the EC will power up the TCON. The TCON has a GPIO
that will be toggled at this time. The GPIO is not marked as a wakeup
source, but the GPIO controller still has an unserviced interrupt.
Unserviced interrupts will block entering HW sleep again. Clearing the
GPIO doesn't help as the TCON continues to assert it until it's been
initialized by i2c-hid.
Fixing this would require TCON F/W changes and it's already broken in
the wild on production hardware.
To avoid triggering this issue add a quirk to avoid letting EC wake
up system at all. The power button still works properly on this system.
Reported-by: Antheas Kapenekakis <lkml@antheas.dev>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3929
Link: https://github.com/bazzite-org/patchwork/commit/95b93b2852718ee1e808c72e6b1836da4a95fc63
Co-developed-by: Antheas Kapenekakis <lkml@antheas.dev>
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20250401133858.1892077-1-superm1@kernel.org
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Commit a7e23ec17feec ("ACPI: button: Install notifier for system
events as well") modified the ACPI button behavior to send
`ACPI_BUTTON_NOTIFY_WAKE` events.
This caused a regression on Dell Optiplex 3040 sending `KEY_POWER`
randomly at runtime.
Adjust logic so that the `ACPI_BUTTON_NOTIFY_WAKE` event will never
send `KEY_POWER`.
Fixes: a7e23ec17feec ("ACPI: button: Install notifier for system events as well")
Reported-by: Ian Laurie <nixuser@mail.com>
Closes: https://lore.kernel.org/linux-acpi/CAJZ5v0hbA6bqxHupTh4NZR-GVSb9M5RL7JSb2yQgvYYJg+z2aQ@mail.gmail.com/T/#md8071e480212201f23e4929607386750d3b6bc13
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2357044
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Ian Laurie <nixuser@mail.com>
Link: https://patch.msgid.link/20250404145034.2608574-1-superm1@kernel.org
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
e820__register_nosave_regions()
While debugging kexec/hibernation hangs and crashes, it turned out that
the current implementation of e820__register_nosave_regions() suffers from
multiple serious issues:
- The end of last region is tracked by PFN, causing it to find holes
that aren't there if two consecutive subpage regions are present
- The nosave PFN ranges derived from holes are rounded out (instead of
rounded in) which makes it inconsistent with how explicitly reserved
regions are handled
Fix this by:
- Treating reserved regions as if they were holes, to ensure consistent
handling (rounding out nosave PFN ranges is more correct as the
kernel does not use partial pages)
- Tracking the end of the last RAM region by address instead of pages
to detect holes more precisely
These bugs appear to have been introduced about ~18 years ago with the very
first version of e820_mark_nosave_regions(), and its flawed assumptions were
carried forward uninterrupted through various waves of rewrites and renames.
[ mingo: Added Git archeology details, for kicks and giggles. ]
Fixes: e8eff5ac294e ("[PATCH] Make swsusp avoid memory holes and reserved memory regions on x86_64")
Reported-by: Roberto Ricci <io@r-ricci.it>
Tested-by: Roberto Ricci <io@r-ricci.it>
Signed-off-by: Myrrh Periwinkle <myrrhperiwinkle@qtmlabs.xyz>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Len Brown <len.brown@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250406-fix-e820-nosave-v3-1-f3787bc1ee1d@qtmlabs.xyz
Closes: https://lore.kernel.org/all/Z4WFjBVHpndct7br@desktop0a/
|
|
The function get_vm_area() is not defined for non-MMU builds and causes a
build error if it is used. Hide the map_pages() function around a:
#ifdef CONFIG_MMU
to keep it from being compiled when CONFIG_MMU is not set.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250407120111.2ccc9319@gandalf.local.home
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/all/4f8ece8b-8862-4f7c-8ede-febd28f8a9fe@roeck-us.net/
Fixes: 394f3f02de531 ("tracing: Use vmap_page_range() to map memmap ring buffer")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Xen disables ACPI for PV guests in DomU, which causes acpi_mps_check() to
return 1 when CONFIG_X86_MPPARSE is not set. As a result, the local APIC is
disabled and the guest is later limited to a single vCPU, despite being
configured with more.
This regression was introduced in version 6.9 in commit 7c0edad3643f
("x86/cpu/topology: Rework possible CPU management"), which added an
early check that limits CPUs to 1 if apic_is_disabled.
Update the acpi_mps_check() logic to return 0 early when running as a Xen
PV guest in DomU, preventing APIC from being disabled in this specific case
and restoring correct multi-vCPU behaviour.
Fixes: 7c0edad3643f ("x86/cpu/topology: Rework possible CPU management")
Signed-off-by: Petr Vaněk <arkamar@atlas.cz>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250407132445.6732-2-arkamar@atlas.cz
|
|
The recently introduced msi_parent_ops::chip_flags sets irq_eoi()/irq_ack()
conditionally, but MIP driver has not been updated. Populate chip_flags
with EOI | ACK flags.
Fixes: 32c6c054661a ("irqchip: Add Broadcom BCM2712 MSI-X interrupt controller")
Signed-off-by: Stanimir Varbanov <svarbanov@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250407125918.3021454-1-svarbanov@suse.de
|
|
Scanning for namespaces can take some time, so if the target is
reconfigured while the scan is running we may miss a Attached Namespace
Attribute Changed AEN.
Check if the NVME_AER_NOTICE_NS_CHANGED bit is set once the scan has
finished, and requeue scanning to pick up any missed change.
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
This isn't fixing a real issue, but there's also zero point in going
through group and buffer setup, when the buffers are going to be
rejected once attempted to get used.
Cc: stable@vger.kernel.org
Reported-by: syzbot+58928048fd1416f1457c@syzkaller.appspotmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When XE_BO_FLAG_PINNED_NORESTORE and XE_BO_FLAG_PINNED_LATE_RESTORE were
added, they were assigned BO flag values in the middle of the flag
range, requiring renumbering of the higher flags. In both cases,
XE_BO_FLAG_CPU_ADDR_MIRROR was overlooked during renumbering because it
was defined below XE_BO_FLAG_GGTT_ALL and thus was not immediately
visible in code diffs changing this area of the code; this resulted in
XE_BO_FLAG_CPU_ADDR_MIRROR clashing with another flag.
Assign XE_BO_FLAG_CPU_ADDR_MIRROR a unique value, and also move the
definition of XE_BO_FLAG_GGTT_ALL down below all of the individual flags
so that this kind of mistake is less likely in the future. Also, while
we're at it, fix up some space vs tab whitespace inconsistency in these
flag definitions.
Fixes: 7f387e6012b6 ("drm/xe: add XE_BO_FLAG_PINNED_LATE_RESTORE")
Fixes: 045448da87bf ("drm/xe: Add XE_BO_FLAG_PINNED_NORESTORE")
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://lore.kernel.org/r/20250404220053.1758356-2-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
|
A preparation patch that separates the number of pages / folios from
the number of niovs. They will not match in the future to support huge
pages, improved dma mapping and/or larger chunk sizes.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/0780ac966ee84200385737f45bb0f2ada052392b.1743848231.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Refill queue lock and other bits are only used from the allocation path
on the rx softirq side, but it shares the cache line with other fields
like ctx that are used also in the "syscall" path, which causes cache
bouncing when softirq runs on a different CPU.
Separate them into different cache lines. The first one now contains
constant fields used by both contextx, followed by a line responsible
for refill queue data.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/6d1f598e27d623c07fc49d6baee13089a9b1216c.1743848241.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
intel_dp::mst.active_links actually indicates the number of MST streams,
not the number of MST links (one MST link carrying one or more MST
streams), rename the field accordingly.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250404150310.1156696-7-imre.deak@intel.com
|
|
Use intel_dp_mst_active_streams() everywhere, instead of open-coding it.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250404150310.1156696-6-imre.deak@intel.com
|
|
intel_dp_mst_active_streams()
It's not clear which encoder intel_dp_mst_encoder_active_links() refers
to (primary/stream), but there is also no reason to call the queried
property an encoder property; remove encoder from the name. Also it's
the number of MST streams being queried, vs. the number of MST links
(there is one MST link carrying one or more MST streams), so rename link
to stream as well.
While at it pass intel_dp to the function, which is more logical and
makes it easier to re-use the function later (without the need to get
the digital port pointer).
Also move the function earlier, next to the related ones.
Suggested-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250404150310.1156696-5-imre.deak@intel.com
|
|
There doesn't seem to be a reason to assert for a non-negative stream
counter in intel_dp_check_mst_status() in particular, remove it. There
is now an equivalent assert in intel_dp_mst_dec_active_streams().
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250404150310.1156696-4-imre.deak@intel.com
|
|
Add helpers to increment/decrement the active MST stream count, instead
of open-coding these.
In mst_stream_pre_enable(), the increment will happen earlier, this is
ok, since nothing depends on the counter between the two points.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250404150310.1156696-3-imre.deak@intel.com
|
|
The intel_dp::link_trained flag indicates whether the link is active,
regardless of whether the link training passed or failed. For clarity
rename the flag to 'active'. While at it move the flag under
intel_dp::link.
Suggested-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250404150310.1156696-2-imre.deak@intel.com
|
|
The .round_waveform_tohw() is supposed to return 1 if the requested
waveform cannot be implemented by rounding down all parameters. Also
adapt the corresponding comment to better describe why the implemented
procedure is right.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Tested-by: Trevor Gamblin <tgamblin@baylibre.com>
Link: https://lore.kernel.org/r/ba451573f0218d76645f068cec78bd97802cf010.1743844730.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
If another channel is already enabled period must not be modified. If
the requested period is smaller than this unchangable period the driver
is still supposed to search a duty_cycle according to the usual rounding
rules.
So don't set the duty_cycle to 0 but continue to determine an
appropriate value for ccr.
Fixes: deaba9cff809 ("pwm: stm32: Implementation of the waveform callbacks")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/f0c50df31daa3d6069bfa8d7fb3e71fae241b026.1743844730.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
Waveform parameters are supposed to be rounded down to the next value
possible for the hardware. However when a requested value is too small,
.round_waveform_tohw() is supposed to pick the next bigger value and
return 1. Let pwm_set_waveform() behave in the same way.
This creates consistency between pwm_set_waveform_might_sleep() with
exact=false and pwm_round_waveform_might_sleep() +
pwm_set_waveform_might_sleep() with exact=true.
The PWM_DEBUG rounding check has to be adapted to only trigger if no
uprounding happend.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Tested-by: Trevor Gamblin <tgamblin@baylibre.com>
Link: https://lore.kernel.org/r/353dc6ae31be815e41fd3df89c257127ca0d1a09.1743844730.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
Reimplement ast_mode_config_mode_valid() with DRM format helpers and
ast's helpers for framebuffer size calculation. Replaces ast's open-
coded assumptions on bpp and page-alignments.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20250324094520.192974-4-tzimmermann@suse.de
|
|
The vaddr field in struct ast_plane serves no purpose. Its value
can be calculated easily from the VRAM base plus the plane offset.
Do so and remove the field.
In ast_primary_plane_helper_get_scanout_buffer(), remove the test
for vaddr being NULL. This cannot legally happen.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20250324094520.192974-3-tzimmermann@suse.de
|
|
The ast driver protects the commit tail against concurrent reads
of the display modes by acquiring a lock. The comment is misleading
as the lock is not released in atomic_flush, but at the end of the
commit-tail helper. Rewrite the comment.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 1fe182154984 ("drm/ast: Acquire I/O-register lock in atomic_commit_tail function")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.2+
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20250324094520.192974-2-tzimmermann@suse.de
|
|
Reuse existing code plumbing HDMI audio support and the existing HDMI
audio helpers that register HDMI codec device and plumb in the
DisplayPort audio interfaces to be handled by the drm_bridge_connector.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250314-dp-hdmi-audio-v6-3-dbd228fa73d7@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
It is common for the DisplayPort bridges to implement audio support. In
preparation to providing a generic framework for DP audio, add
corresponding interface to struct drm_bridge. As suggested by Maxime
for now this is mostly c&p of the corresponding HDMI audio API.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250314-dp-hdmi-audio-v6-2-dbd228fa73d7@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
As pointed out by Laurent, OP bits are supposed to describe operations.
Split DRM_BRIDGE_OP_HDMI_AUDIO from DRM_BRIDGE_OP_HDMI instead of
overloading DRM_BRIDGE_OP_HDMI.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250314-dp-hdmi-audio-v6-1-dbd228fa73d7@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Backmerging to get v6.15-rc1 into drm-misc-next. Also fixes a
build issue when enabling CONFIG_DRM_SCHED_KUNIT_TEST.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
Add the missing vrr parameters in vrr_params_changed() helper.
This ensures that changes in vrr.vsync_{start,end} trigger a call to
appropriate helpers to update the VRR registers.
Fixes: e8cd188e91bb ("drm/i915/display: Compute vrr_vsync params")
Cc: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Cc: Arun R Murthy <arun.r.murthy@intel.com>
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: <stable@vger.kernel.org> # v6.10+
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250404080540.2059511-1-ankit.k.nautiyal@intel.com
|
|
Allow this bridge to be removable without dangling pointers and
use-after-free, together with proper use of drm_bridge_get() and _put() by
consumers.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250326-drm-bridge-refcount-v9-5-5e0661fe1f84@bootlin.com
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
|
|
Allow this bridge to be removable without dangling pointers and
use-after-free, together with proper use of drm_bridge_get() and _put() by
consumers.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250326-drm-bridge-refcount-v9-4-5e0661fe1f84@bootlin.com
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
|
|
All DRM bridges are now supposed to be allocated using
devm_drm_bridge_alloc(), which is cleaner and necessary to support
refcounting.
In the absence of a drm_bridge_init() or such initialization function,
document the new mandatory alloc function on the first DRM bridge core
function that is called after allocation, i.e. drm_bridge_add().
Suggested-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250326-drm-bridge-refcount-v9-3-5e0661fe1f84@bootlin.com
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
|
|
DRM bridges are currently considered as a fixed element of a DRM card, and
thus their lifetime is assumed to extend for as long as the card
exists. New use cases, such as hot-pluggable hardware with video bridges,
require DRM bridges to be added to and removed from a DRM card without
tearing the card down. This is possible for connectors already (used by DP
MST), it is now needed for DRM bridges as well.
As a first preliminary step, make bridges reference-counted to allow a
struct drm_bridge (along with the private driver structure embedding it) to
stay allocated even after the driver has been removed, until the last
reference is put.
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250326-drm-bridge-refcount-v9-2-5e0661fe1f84@bootlin.com
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
|
|
Add a macro to allocate and initialize a DRM bridge embedded within a
private driver struct.
Compared to current practice, which is based on [devm_]kzalloc() allocation
followed by open-coded initialization of fields, this allows to have a
common and explicit API to allocate and initialize DRM bridges.
Besides being useful to consolidate bridge driver code, this is a
fundamental step in preparation for adding dynamic lifetime to bridges
based on refcount.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250326-drm-bridge-refcount-v9-1-5e0661fe1f84@bootlin.com
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
|
|
PVH dom0 re-uses logic from PV dom0, in which RAM ranges not assigned to
dom0 are re-used as scratch memory to map foreign and grant pages. Such
logic relies on reporting those unpopulated ranges as RAM to Linux, and
mark them as reserved. This way Linux creates the underlying page
structures required for metadata management.
Such approach works fine on PV because the initial balloon target is
calculated using specific Xen data, that doesn't take into account the
memory type changes described above. However on HVM and PVH the initial
balloon target is calculated using get_num_physpages(), and that function
does take into account the unpopulated RAM regions used as scratch space
for remote domain mappings.
This leads to PVH dom0 having an incorrect initial balloon target, which
causes malfunction (excessive memory freeing) of the balloon driver if the
dom0 memory target is later adjusted from the toolstack.
Fix this by using xen_released_pages to account for any pages that are part
of the memory map, but are already unpopulated when the balloon driver is
initialized. This accounts for any regions used for scratch remote
mappings. Note on x86 xen_released_pages definition is moved to
enlighten.c so it's uniformly available for all Xen-enabled builds.
Take the opportunity to unify PV with PVH/HVM guests regarding the usage of
get_num_physpages(), as that avoids having to add different logic for PV vs
PVH in both balloon_add_regions() and arch_xen_unpopulated_init().
Much like a6aa4eb994ee, the code in this changeset should have been part of
38620fc4e893.
Fixes: a6aa4eb994ee ('xen/x86: add extra pages to unpopulated-alloc if available')
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: stable@vger.kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20250407082838.65495-1-roger.pau@citrix.com>
|
|
xen-acpi-processor functions under a PVH dom0 with only a
xen_initial_domain() runtime check. Change the Kconfig dependency from
PV dom0 to generic dom0 to reflect that.
Suggested-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Jason Andryuk <jason.andryuk@amd.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Tested-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20250331172913.51240-1-jason.andryuk@amd.com>
|
|
Reduce the scope of some loop counters as these aren't needed outside
the loops they're used in.
Signed-off-by: Alexandru Dadu <alexandru.dadu@imgtec.com>
Reviewed-by: Matt Coster <matt.coster@imgtec.com>
Link: https://lore.kernel.org/r/20250402-for-loop-counter-scope-v2-1-4fd550d22832@imgtec.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
|
|
Add palette support and export GAMMA properties via sysfs. User-space
compositors can use this interface for programming gamma ramps or night
mode.
Vesadrm supports palette updates via VGA DAC registers or VESA palette
calls. Up to 256 palette entries are available. Userspace always supplies
gamma ramps of 256 entries. If the native color format does not match
this because pixel component have less then 8 bits, vesadrm interpolates
among the palette entries.
The code uses CamelCase style in a few places to match the VESA manuals.
v3:
- fix coding style
v2:
- use CONFIG_X86_32 instead of __i386__ (checkpatch)
- protect struct vesadrm.pmi with CONFIG_X86_32
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250401094056.32904-19-tzimmermann@suse.de
|
|
Enable the connector's EDID property if edid_info contains valid
data. Exports the EDID via sysfs for user-space compositors.
EDID information is not always available. Depending on the system
and kernel configuration, it is either provided by the boot loader
or read by the kernel during early boot stages.
There's only one VESA display, so EDID data always belongs to this
output.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250401094056.32904-18-tzimmermann@suse.de
|
|
Add support for screen_info setups with VIDEO_TYPE_VLFB. Provide the
minimum functionality of reading modes, updating and clearing the display.
There is existing support for these displays provided by simpledrm with
CONFIG_SYSFB_SIMPLEFB=y. Using vesadrm over simpledrm will allow for the
use of additional functionality provided by VESA, such as EDID information,
gamma correction and palette modes. This enhances the user experience and
adds support for more display configuratons.
v4:
- depend on CONFIG_X86
v3:
- depend on !SYSFB_SIMPLEFB (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250401094056.32904-17-tzimmermann@suse.de
|
|
Enable the connector's EDID property if edid_info contains valid
data. Exports the EDID via sysfs for user-space compositors.
EDID information is not always available. Depending on the system
and kernel configuration, it is either provided by the boot loader
or read by the kernel during early boot stages.
As of now, there's only one EFI display, so that EDID data always
belongs to this output. This might change if there's ever more than
one EFI display in the system.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250401094056.32904-16-tzimmermann@suse.de
|
|
Add support for screen_info setups with VIDEO_TYPE_EFI. Provide the
minimum functionality of reading modes, updating and clearing the display.
There is existing support for these displays provided by simpledrm with
CONFIG_SYSFB_SIMPLEFB=y. Using efidrm over simpledrm will allows for the
mapping of video memory with correct caching. Simpledrm always assumes WC
caching, while fully cached memory is possible with efidrm. Efidrm will
also allow for the use of additional functionality provided by EFI, such
as EDID information.
In addition to efidrm, add struct pixel_format plus initializer macros.
The type and macros describe pixel formats in a generic way on order to
find the DRM format from the screen_info settings. Similar existing code
in SIMPLEFB_FORMATS and fbdev is not really what is needed in efidrm,
but SIMPLEFB_FORMATS can later be converted to struct pixel_format.
v4:
- depend on CONFIG_EFI
- disallow module for now as efi_mem_desc_lookup() is not exported
v3:
- depend on !SYSFB_SIMPLEFB (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250401094056.32904-15-tzimmermann@suse.de
|
|
Move the calculation of the bits per pixels for screen_info into a
helper function. This will make it available to other callers besides
the firmware code.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250401094056.32904-14-tzimmermann@suse.de
|
|
Add EDID support to sysfb connector helpers. Read the EDID property
from the OF node in ofdrm. Without EDID, this does nothing.
Some systems with OF display, such as 32-bit PPC Macintoshs, provide
the system display's EDID data as node property in their DT. Exporting
this information allows compositors to implement correct DPI and
meaningful color management.
v3:
- avoid parser error by clearing EDID extension field
v2:
- return errno codes on errors (Jani)
- simplify EDID read logic (Jani)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250401094056.32904-13-tzimmermann@suse.de
|
|
Merge the primary plane code of ofdrm and simpledrm. Replace the
plane implementation in each driver with the shared helpers. Set
up driver callbacks and format modifiers with initializer macros.
The plane code in ofdrm and simpledrm is very similar. Ofdrm has a
more sophisticated implementation of atomic_disable, which clears
individual scanlines. The code in simpledrm clears the whole buffer
at once. Take the ofdrm version.
Simpledrm supports get_scanout_buffer. Import it into the shared
helpers, which makes it available in ofdrm.
The supported formats are all native formats plus an optional enulated
XRGB8888 if that's not already a native format. Provide an initializer
macro that computes the size of the formats array.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250401094056.32904-12-tzimmermann@suse.de
|
|
Merge the CRTC functions of ofdrm and simpledrm. Replace the code
in each driver with the shared helpers. Set up callbacks with
initializer macros.
Ofdrm supports a gamma LUT, while simpledrm does not. So far ofdrm's
LUT size has been hard-coded in the driver CRTC's atomic_check helper.
Now pass the size of the LUT to the sysfb device. Ofdrm's custom
atomic_flush is still required to apply changes to the LUT. Simpledrm
passes a LUT size of 0, which disables the gamma LUT.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250401094056.32904-11-tzimmermann@suse.de
|
|
Move ofdrm's struct ofdrm_crtc_state plus functions to sysfb
helpers and rename everything to drm_sysfb_crtc_state.
The sysfb CRTC state is a regular CRTC state with information on
the primary plane's color format, as required for color management.
Helpers for sysfb planes will later set this up automatically.
In ofdrm and simpledrm, replace existing code with the new helpers.
Ofdrm continues to use the CRTC state for color management. This
has no effect on simpledrm.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250401094056.32904-10-tzimmermann@suse.de
|
|
Merge the connector functions of ofdrm and simpledrm. Replace the
code in each driver with the shared helpers. Set up callbacks with
initializer macros.
No effective code changes. The sysfb connector only returns the
preconfigured display mode.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250401094056.32904-9-tzimmermann@suse.de
|
|
Provide initializer to set struct drm_mode_config_funcs. Convert
ofdrm and simpledrm.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250401094056.32904-8-tzimmermann@suse.de
|
