| Age | Commit message (Collapse) | Author |
|---|
|
Commit f85949f98206 ("xdp: add xdp_set_features_flag utility routine")
added routines to inform the core about XDP flag changes.
GVE support was added around the same time and missed using them.
GVE only changes the flags on error recover or resume.
Presumably the flags may change during resume if VM migrated.
User would not get the notification and upper devices would
not get a chance to recalculate their flags.
Fixes: 75eaae158b1b ("gve: Add XDP DROP and TX support for GQI-QPL format")
Reviewed-By: Jeroen de Borst <jeroendb@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250106180210.1861784-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzbot presented an use-after-free report [0] regarding ipvlan and
linkwatch.
ipvlan does not hold a refcnt of the lower device unlike vlan and
macvlan.
If the linkwatch work is triggered for the ipvlan dev, the lower dev
might have already been freed, resulting in UAF of ipvlan->phy_dev in
ipvlan_get_iflink().
We can delay the lower dev unregistration like vlan and macvlan by
holding the lower dev's refcnt in dev->netdev_ops->ndo_init() and
releasing it in dev->priv_destructor().
Jakub pointed out calling .ndo_XXX after unregister_netdevice() has
returned is error prone and suggested [1] addressing this UAF in the
core by taking commit 750e51603395 ("net: avoid potential UAF in
default_operstate()") further.
Let's assume unregistering devices DOWN and use RCU protection in
default_operstate() not to race with the device unregistration.
[0]:
BUG: KASAN: slab-use-after-free in ipvlan_get_iflink+0x84/0x88 drivers/net/ipvlan/ipvlan_main.c:353
Read of size 4 at addr ffff0000d768c0e0 by task kworker/u8:35/6944
CPU: 0 UID: 0 PID: 6944 Comm: kworker/u8:35 Not tainted 6.13.0-rc2-g9bc5c9515b48 #12 4c3cb9e8b4565456f6a355f312ff91f4f29b3c47
Hardware name: linux,dummy-virt (DT)
Workqueue: events_unbound linkwatch_event
Call trace:
show_stack+0x38/0x50 arch/arm64/kernel/stacktrace.c:484 (C)
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0xbc/0x108 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0x16c/0x6f0 mm/kasan/report.c:489
kasan_report+0xc0/0x120 mm/kasan/report.c:602
__asan_report_load4_noabort+0x20/0x30 mm/kasan/report_generic.c:380
ipvlan_get_iflink+0x84/0x88 drivers/net/ipvlan/ipvlan_main.c:353
dev_get_iflink+0x7c/0xd8 net/core/dev.c:674
default_operstate net/core/link_watch.c:45 [inline]
rfc2863_policy+0x144/0x360 net/core/link_watch.c:72
linkwatch_do_dev+0x60/0x228 net/core/link_watch.c:175
__linkwatch_run_queue+0x2f4/0x5b8 net/core/link_watch.c:239
linkwatch_event+0x64/0xa8 net/core/link_watch.c:282
process_one_work+0x700/0x1398 kernel/workqueue.c:3229
process_scheduled_works kernel/workqueue.c:3310 [inline]
worker_thread+0x8c4/0xe10 kernel/workqueue.c:3391
kthread+0x2b0/0x360 kernel/kthread.c:389
ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:862
Allocated by task 9303:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x30/0x68 mm/kasan/common.c:68
kasan_save_alloc_info+0x44/0x58 mm/kasan/generic.c:568
poison_kmalloc_redzone mm/kasan/common.c:377 [inline]
__kasan_kmalloc+0x84/0xa0 mm/kasan/common.c:394
kasan_kmalloc include/linux/kasan.h:260 [inline]
__do_kmalloc_node mm/slub.c:4283 [inline]
__kmalloc_node_noprof+0x2a0/0x560 mm/slub.c:4289
__kvmalloc_node_noprof+0x9c/0x230 mm/util.c:650
alloc_netdev_mqs+0xb4/0x1118 net/core/dev.c:11209
rtnl_create_link+0x2b8/0xb60 net/core/rtnetlink.c:3595
rtnl_newlink_create+0x19c/0x868 net/core/rtnetlink.c:3771
__rtnl_newlink net/core/rtnetlink.c:3896 [inline]
rtnl_newlink+0x122c/0x15c0 net/core/rtnetlink.c:4011
rtnetlink_rcv_msg+0x61c/0x918 net/core/rtnetlink.c:6901
netlink_rcv_skb+0x1dc/0x398 net/netlink/af_netlink.c:2542
rtnetlink_rcv+0x34/0x50 net/core/rtnetlink.c:6928
netlink_unicast_kernel net/netlink/af_netlink.c:1321 [inline]
netlink_unicast+0x618/0x838 net/netlink/af_netlink.c:1347
netlink_sendmsg+0x5fc/0x8b0 net/netlink/af_netlink.c:1891
sock_sendmsg_nosec net/socket.c:711 [inline]
__sock_sendmsg net/socket.c:726 [inline]
__sys_sendto+0x2ec/0x438 net/socket.c:2197
__do_sys_sendto net/socket.c:2204 [inline]
__se_sys_sendto net/socket.c:2200 [inline]
__arm64_sys_sendto+0xe4/0x110 net/socket.c:2200
__invoke_syscall arch/arm64/kernel/syscall.c:35 [inline]
invoke_syscall+0x90/0x278 arch/arm64/kernel/syscall.c:49
el0_svc_common+0x13c/0x250 arch/arm64/kernel/syscall.c:132
do_el0_svc+0x54/0x70 arch/arm64/kernel/syscall.c:151
el0_svc+0x4c/0xa8 arch/arm64/kernel/entry-common.c:744
el0t_64_sync_handler+0x78/0x108 arch/arm64/kernel/entry-common.c:762
el0t_64_sync+0x198/0x1a0 arch/arm64/kernel/entry.S:600
Freed by task 10200:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x30/0x68 mm/kasan/common.c:68
kasan_save_free_info+0x58/0x70 mm/kasan/generic.c:582
poison_slab_object mm/kasan/common.c:247 [inline]
__kasan_slab_free+0x48/0x68 mm/kasan/common.c:264
kasan_slab_free include/linux/kasan.h:233 [inline]
slab_free_hook mm/slub.c:2338 [inline]
slab_free mm/slub.c:4598 [inline]
kfree+0x140/0x420 mm/slub.c:4746
kvfree+0x4c/0x68 mm/util.c:693
netdev_release+0x94/0xc8 net/core/net-sysfs.c:2034
device_release+0x98/0x1c0
kobject_cleanup lib/kobject.c:689 [inline]
kobject_release lib/kobject.c:720 [inline]
kref_put include/linux/kref.h:65 [inline]
kobject_put+0x2b0/0x438 lib/kobject.c:737
netdev_run_todo+0xdd8/0xf48 net/core/dev.c:10924
rtnl_unlock net/core/rtnetlink.c:152 [inline]
rtnl_net_unlock net/core/rtnetlink.c:209 [inline]
rtnl_dellink+0x484/0x680 net/core/rtnetlink.c:3526
rtnetlink_rcv_msg+0x61c/0x918 net/core/rtnetlink.c:6901
netlink_rcv_skb+0x1dc/0x398 net/netlink/af_netlink.c:2542
rtnetlink_rcv+0x34/0x50 net/core/rtnetlink.c:6928
netlink_unicast_kernel net/netlink/af_netlink.c:1321 [inline]
netlink_unicast+0x618/0x838 net/netlink/af_netlink.c:1347
netlink_sendmsg+0x5fc/0x8b0 net/netlink/af_netlink.c:1891
sock_sendmsg_nosec net/socket.c:711 [inline]
__sock_sendmsg net/socket.c:726 [inline]
____sys_sendmsg+0x410/0x708 net/socket.c:2583
___sys_sendmsg+0x178/0x1d8 net/socket.c:2637
__sys_sendmsg net/socket.c:2669 [inline]
__do_sys_sendmsg net/socket.c:2674 [inline]
__se_sys_sendmsg net/socket.c:2672 [inline]
__arm64_sys_sendmsg+0x12c/0x1c8 net/socket.c:2672
__invoke_syscall arch/arm64/kernel/syscall.c:35 [inline]
invoke_syscall+0x90/0x278 arch/arm64/kernel/syscall.c:49
el0_svc_common+0x13c/0x250 arch/arm64/kernel/syscall.c:132
do_el0_svc+0x54/0x70 arch/arm64/kernel/syscall.c:151
el0_svc+0x4c/0xa8 arch/arm64/kernel/entry-common.c:744
el0t_64_sync_handler+0x78/0x108 arch/arm64/kernel/entry-common.c:762
el0t_64_sync+0x198/0x1a0 arch/arm64/kernel/entry.S:600
The buggy address belongs to the object at ffff0000d768c000
which belongs to the cache kmalloc-cg-4k of size 4096
The buggy address is located 224 bytes inside of
freed 4096-byte region [ffff0000d768c000, ffff0000d768d000)
The buggy address belongs to the physical page:
page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x117688
head: order:3 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0
memcg:ffff0000c77ef981
flags: 0xbfffe0000000040(head|node=0|zone=2|lastcpupid=0x1ffff)
page_type: f5(slab)
raw: 0bfffe0000000040 ffff0000c000f500 dead000000000100 dead000000000122
raw: 0000000000000000 0000000000040004 00000001f5000000 ffff0000c77ef981
head: 0bfffe0000000040 ffff0000c000f500 dead000000000100 dead000000000122
head: 0000000000000000 0000000000040004 00000001f5000000 ffff0000c77ef981
head: 0bfffe0000000003 fffffdffc35da201 ffffffffffffffff 0000000000000000
head: 0000000000000008 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff0000d768bf80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff0000d768c000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff0000d768c080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff0000d768c100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff0000d768c180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
Fixes: 8c55facecd7a ("net: linkwatch: only report IF_OPER_LOWERLAYERDOWN if iflink is actually down")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/netdev/20250102174400.085fd8ac@kernel.org/ [1]
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250106071911.64355-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We've noticed that NFS can hang when using RPC over TLS on an unstable
connection, and investigation shows that the RPC layer is stuck in a tight
loop attempting to transmit, but forever getting -EBADMSG back from the
underlying network. The loop begins when tcp_sendmsg_locked() returns
-EPIPE to tls_tx_records(), but that error is converted to -EBADMSG when
calling the socket's error reporting handler.
Instead of converting errors from tcp_sendmsg_locked(), let's pass them
along in this path. The RPC layer handles -EPIPE by reconnecting the
transport, which prevents the endless attempts to transmit on a broken
connection.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Fixes: a42055e8d2c3 ("net/tls: Add support for async encryption of records for performance")
Link: https://patch.msgid.link/9594185559881679d81f071b181a10eb07cd079f.1736004079.git.bcodding@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As SMB3 posix extension specification, Give posix file type to posix
mode.
https://www.samba.org/~slow/SMB3_POSIX/fscc_posix_extensions.html#posix-file-type-definition
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
scsi_execute_cmd() function can return both negative (linux codes) and
positive (scsi_cmnd result field) error codes.
Currently the driver just passes error codes of scsi_execute_cmd() to
hwmon core, which is incorrect because hwmon only checks for negative
error codes. This leads to hwmon reporting uninitialized data to
userspace in case of SCSI errors (for example if the disk drive was
disconnected).
This patch checks scsi_execute_cmd() output and returns -EIO if it's
error code is positive.
Fixes: 5b46903d8bf37 ("hwmon: Driver for disk and solid state drives with temperature sensors")
Signed-off-by: Daniil Stas <daniil.stas@posteo.net>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: linux-kernel@vger.kernel.org
Cc: linux-scsi@vger.kernel.org
Cc: linux-ide@vger.kernel.org
Cc: linux-hwmon@vger.kernel.org
Link: https://lore.kernel.org/r/20250105213618.531691-1-daniil.stas@posteo.net
[groeck: Avoid inline variable declaration for portability]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The x86 shadow stack support has its own set of registers. Those registers
are XSAVE-managed, but they are "supervisor state components" which means
that userspace can not touch them with XSAVE/XRSTOR. It also means that
they are not accessible from the existing ptrace ABI for XSAVE state.
Thus, there is a new ptrace get/set interface for it.
The regset code that ptrace uses provides an ->active() handler in
addition to the get/set ones. For shadow stack this ->active() handler
verifies that shadow stack is enabled via the ARCH_SHSTK_SHSTK bit in the
thread struct. The ->active() handler is checked from some call sites of
the regset get/set handlers, but not the ptrace ones. This was not
understood when shadow stack support was put in place.
As a result, both the set/get handlers can be called with
XFEATURE_CET_USER in its init state, which would cause get_xsave_addr() to
return NULL and trigger a WARN_ON(). The ssp_set() handler luckily has an
ssp_active() check to avoid surprising the kernel with shadow stack
behavior when the kernel is not ready for it (ARCH_SHSTK_SHSTK==0). That
check just happened to avoid the warning.
But the ->get() side wasn't so lucky. It can be called with shadow stacks
disabled, triggering the warning in practice, as reported by Christina
Schimpe:
WARNING: CPU: 5 PID: 1773 at arch/x86/kernel/fpu/regset.c:198 ssp_get+0x89/0xa0
[...]
Call Trace:
<TASK>
? show_regs+0x6e/0x80
? ssp_get+0x89/0xa0
? __warn+0x91/0x150
? ssp_get+0x89/0xa0
? report_bug+0x19d/0x1b0
? handle_bug+0x46/0x80
? exc_invalid_op+0x1d/0x80
? asm_exc_invalid_op+0x1f/0x30
? __pfx_ssp_get+0x10/0x10
? ssp_get+0x89/0xa0
? ssp_get+0x52/0xa0
__regset_get+0xad/0xf0
copy_regset_to_user+0x52/0xc0
ptrace_regset+0x119/0x140
ptrace_request+0x13c/0x850
? wait_task_inactive+0x142/0x1d0
? do_syscall_64+0x6d/0x90
arch_ptrace+0x102/0x300
[...]
Ensure that shadow stacks are active in a thread before looking them up
in the XSAVE buffer. Since ARCH_SHSTK_SHSTK and user_ssp[SHSTK_EN] are
set at the same time, the active check ensures that there will be
something to find in the XSAVE buffer.
[ dhansen: changelog/subject tweaks ]
Fixes: 2fab02b25ae7 ("x86: Add PTRACE interface for shadow stack")
Reported-by: Christina Schimpe <christina.schimpe@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Tested-by: Christina Schimpe <christina.schimpe@intel.com>
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250107233056.235536-1-rick.p.edgecombe%40intel.com
|
|
When `ksmbd_vfs_kern_path_locked` met an error and it is not the last
entry, it will exit without restoring changed path buffer. But later this
buffer may be used as the filename for creation.
Fixes: c5a709f08d40 ("ksmbd: handle caseless file creation")
Signed-off-by: He Wang <xw897002528@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Don't use Wa_22019338487 for VF.
Signed-off-by: Marcin Bernatowicz <marcin.bernatowicz@linux.intel.com>
Cc: Adam Miszczak <adam.miszczak@linux.intel.com>
Cc: Jakub Kolakowski <jakub1.kolakowski@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Lukasz Laguna <lukasz.laguna@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Narasimha C V <narasimha.c.v@intel.com>
Cc: Piotr Piorkowski <piotr.piorkowski@intel.com>
Cc: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Cc: Tomasz Lis <tomasz.lis@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241211064211.781820-4-marcin.bernatowicz@linux.intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
|
Add a match helper that allows the application of a workaround
when the device is not an SR-IOV VF (Virtual Function) device.
Signed-off-by: Marcin Bernatowicz <marcin.bernatowicz@linux.intel.com>
Cc: Adam Miszczak <adam.miszczak@linux.intel.com>
Cc: Jakub Kolakowski <jakub1.kolakowski@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Lukasz Laguna <lukasz.laguna@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Narasimha C V <narasimha.c.v@intel.com>
Cc: Piotr Piorkowski <piotr.piorkowski@intel.com>
Cc: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Cc: Tomasz Lis <tomasz.lis@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241211064211.781820-3-marcin.bernatowicz@linux.intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
|
Don't check for flat ccs from VF-level as VF does not have direct
access to the register.
If the BIOS disables FlatCCS support (a use-case that will nearly never
be used) and the has_flat_ccs flag is set, there shouldn't be
any functional impact. The hardware will drop writes to the CCS region,
and reads from the CCS region will always return 0.
For the native case, the flag is disabled if the BIOS disables
it to avoid unnecessary overhead in buffer object (BO) creation
and migration.
Signed-off-by: Jakub Kolakowski <jakub1.kolakowski@intel.com>
Suggested-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Cc: Adam Miszczak <adam.miszczak@linux.intel.com>
Cc: Jakub Kolakowski <jakub1.kolakowski@intel.com>
Cc: Lukasz Laguna <lukasz.laguna@intel.com>
Cc: Marcin Bernatowicz <marcin.bernatowicz@linux.intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Narasimha C V <narasimha.c.v@intel.com>
Cc: Piotr Piorkowski <piotr.piorkowski@intel.com>
Cc: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Cc: Tomasz Lis <tomasz.lis@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Marcin Bernatowicz <marcin.bernatowicz@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241211064211.781820-2-marcin.bernatowicz@linux.intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux fix from Paul Moore:
"A single SELinux patch to address a problem with a single domain using
multiple xperm classes"
* tag 'selinux-pr-20250107' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: match extended permissions to their base permissions
|
|
The interrupt handler for bandwidth notifications, pcie_bwnotif_irq(),
dereferences a "data" pointer.
On unbind, that pointer is set to NULL by pcie_bwnotif_remove(). However
the interrupt handler may still be invoked afterwards and will dereference
that NULL pointer.
That's because the interrupt is requested using a devm_*() helper and the
driver core releases devm_*() resources *after* calling ->remove().
pcie_bwnotif_remove() does clear the Link Bandwidth Management Interrupt
Enable and Link Autonomous Bandwidth Interrupt Enable bits in the Link
Control Register, but that won't prevent execution of pcie_bwnotif_irq():
The interrupt for bandwidth notifications may be shared with AER, DPC,
PME, and hotplug. So pcie_bwnotif_irq() may be executed as long as the
interrupt is requested.
There's a similar race on bind: pcie_bwnotif_probe() requests the
interrupt when the "data" pointer still points to NULL. A NULL pointer
deref may thus likewise occur if AER, DPC, PME or hotplug raise an
interrupt in-between the bandwidth controller's call to devm_request_irq()
and assignment of the "data" pointer.
Drop the devm_*() usage and reorder requesting of the interrupt to fix the
issue.
While at it, drop a stray but harmless no_free_ptr() invocation when
assigning the "data" pointer in pcie_bwnotif_probe().
Ilpo points out that the locking on unbind and bind needs to be symmetric,
so move the call to pcie_bwnotif_disable() inside the critical section
protected by pcie_bwctrl_setspeed_rwsem and pcie_bwctrl_lbms_rwsem.
Evert reports a hang on shutdown of an ASUS ROG Strix SCAR 17 G733PYV.
The issue is no longer reproducible with the present commit.
Evert found that attaching a USB-C monitor prevented the hang. The
machine contains an ASMedia USB 3.2 controller below a hotplug-capable
Root Port. So one possible explanation is that the controller gets
hot-removed on shutdown unless something is connected. And the ensuing
hotplug interrupt occurs exactly when the bandwidth controller is
unregistering. The precise cause could not be determined because the
screen had already turned black when the hang occurred.
Link: https://lore.kernel.org/r/ae2b02c9cfbefff475b6e132b0aa962aaccbd7b2.1736162539.git.lukas@wunner.de
Fixes: 665745f27487 ("PCI/bwctrl: Re-add BW notification portdrv as PCIe BW controller")
Reported-by: Evert Vorster <evorster@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219629
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Evert Vorster <evorster@gmail.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
interface"
There is a garbage value problem in fbnic_mac_get_sensor_asic(). 'fw_cmpl'
is uninitialized which makes 'sensor' and '*val' to be stored garbage
value. Revert commit d85ebade02e8 ("eth: fbnic: Add hardware monitoring
support via HWMON interface") to avoid this problem.
Fixes: d85ebade02e8 ("eth: fbnic: Add hardware monitoring support via HWMON interface")
Signed-off-by: Su Hui <suhui@nfschina.com>
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Suggested-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250106023647.47756-1-suhui@nfschina.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
of_thermal_zone_find() calls of_parse_phandle_with_args(), but does not
release the OF node reference obtained by it.
Add a of_node_put() call when the call is successful.
Fixes: 3fd6d6e2b4e8 ("thermal/of: Rework the thermal device tree initialization")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Link: https://patch.msgid.link/20241224031809.950461-1-joe@pf.is.s.u-tokyo.ac.jp
[ rjw: Changelog edit ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
acpi_dev_irq_override() gets called approx. 30 times during boot (15 legacy
IRQs * 2 override_table entries). Of these 30 calls at max 1 will match
the non DMI checks done by acpi_dev_irq_override(). The dmi_check_system()
check is by far the most expensive check done by acpi_dev_irq_override(),
make this call the last check done by acpi_dev_irq_override() so that it
will be called at max 1 time instead of 30 times.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20241228165253.42584-1-hdegoede@redhat.com
[ rjw: Subject edit ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The TongFang GM5HG0A is a TongFang barebone design which is sold under
various brand names.
The ACPI IRQ override for the keyboard IRQ must be used on these AMD Zen
laptops in order for the IRQ to work.
At least on the SKIKK Vanaheim variant the DMI product- and board-name
strings have been replaced by the OEM with "Vanaheim" so checking that
board-name contains "GM5HG0A" as is usually done for TongFang barebones
quirks does not work.
The DMI OEM strings do contain "GM5HG0A". I have looked at the dmidecode
for a few other TongFang devices and the TongFang code-name string being
in the OEM strings seems to be something which is consistently true.
Add a quirk checking one of the DMI_OEM_STRING(s) is "GM5HG0A" in the hope
that this will work for other OEM versions of the "GM5HG0A" too.
Link: https://www.skikk.eu/en/laptops/vanaheim-15-rtx-4060
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219614
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patch.msgid.link/20241228164845.42381-1-hdegoede@redhat.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Like the Vivobook X1704VAP the X1504VAP has its keyboard IRQ (1) described
as ActiveLow in the DSDT, which the kernel overrides to EdgeHigh which
breaks the keyboard.
Add the X1504VAP to the irq1_level_low_skip_override[] quirk table to fix
this.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219224
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patch.msgid.link/20241220181352.25974-1-hdegoede@redhat.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Some entries use my kernel.org address, while others use my Red Hat one.
Since this is a bit of an inconvinience for me, align them to all use the
same (kernel.org) address.
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20241204152248.8644-1-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Going forward, struct intel_display is the main display device
structure. Convert intel_global_state.[ch] to it.
This allows us to make intel_pmdemand.c completely independent of
i915_drv.h.
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2b5e743b285a86a59ee87085727847c758c8d552.1735662324.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Going forward, struct intel_display is the main display device
structure. Convert pmdemand to it.
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c1d92e9490013d5aba50fc1d1ebc0ee18e82cf7e.1735662324.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Only intel_pmdemand.c should look inside the struct
intel_pmdemand_state. Indeed, this is already the case. Finish the job
and make struct intel_pmdemand_state opaque, preventing any direct pokes
at the guts of it in the future.
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/bc5f418785ecd51454761e9a55f21340470a92e3.1735662324.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
In preparation for making struct intel_pmdemand_state an opaque type,
convert to_intel_pmdemand_state() to a function.
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/10324781f9f7eae5a92506aaa7a40403efd345dd.1735662324.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
When booting with a dock connected, the igc driver may get stuck for ~40
seconds if PCIe link is lost during initialization.
This happens because the driver access device after EECD register reads
return all F's, indicating failed reads. Consequently, hw->hw_addr is set
to NULL, which impacts subsequent rd32() reads. This leads to the driver
hanging in igc_get_hw_semaphore_i225(), as the invalid hw->hw_addr
prevents retrieving the expected value.
To address this, a validation check and a corresponding return value
catch is added for the EECD register read result. If all F's are
returned, indicating PCIe link loss, the driver will return -ENXIO
immediately. This avoids the 40-second hang and significantly improves
boot time when using a dock with an igc NIC.
Log before the patch:
[ 0.911913] igc 0000:70:00.0: enabling device (0000 -> 0002)
[ 0.912386] igc 0000:70:00.0: PTM enabled, 4ns granularity
[ 1.571098] igc 0000:70:00.0 (unnamed net_device) (uninitialized): PCIe link lost, device now detached
[ 43.449095] igc_get_hw_semaphore_i225: igc 0000:70:00.0 (unnamed net_device) (uninitialized): Driver can't access device - SMBI bit is set.
[ 43.449186] igc 0000:70:00.0: probe with driver igc failed with error -13
[ 46.345701] igc 0000:70:00.0: enabling device (0000 -> 0002)
[ 46.345777] igc 0000:70:00.0: PTM enabled, 4ns granularity
Log after the patch:
[ 1.031000] igc 0000:70:00.0: enabling device (0000 -> 0002)
[ 1.032097] igc 0000:70:00.0: PTM enabled, 4ns granularity
[ 1.642291] igc 0000:70:00.0 (unnamed net_device) (uninitialized): PCIe link lost, device now detached
[ 5.480490] igc 0000:70:00.0: enabling device (0000 -> 0002)
[ 5.480516] igc 0000:70:00.0: PTM enabled, 4ns granularity
Fixes: ab4056126813 ("igc: Add NVM support")
Cc: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Signed-off-by: En-Wei Wu <en-wei.wu@canonical.com>
Reviewed-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
ptp4l application reports too high offset when ran on E823 device
with a 100GB/s link. Those values cannot go under 100ns, like in a
working case when using 100 GB/s cable.
This is due to incorrect frequency settings on the PHY clocks for
100 GB/s speed. Changes are introduced to align with the internal
hardware documentation, and correctly initialize frequency in PHY
clocks with the frequency values that are in our HW spec.
To reproduce the issue run ptp4l as a Time Receiver on E823 device,
and observe the offset, which will never approach values seen
in the PTP working case.
Reproduction output:
ptp4l -i enp137s0f3 -m -2 -s -f /etc/ptp4l_8275.conf
ptp4l[5278.775]: master offset 12470 s2 freq +41288 path delay -3002
ptp4l[5278.837]: master offset 10525 s2 freq +39202 path delay -3002
ptp4l[5278.900]: master offset -24840 s2 freq -20130 path delay -3002
ptp4l[5278.963]: master offset 10597 s2 freq +37908 path delay -3002
ptp4l[5279.025]: master offset 8883 s2 freq +36031 path delay -3002
ptp4l[5279.088]: master offset 7267 s2 freq +34151 path delay -3002
ptp4l[5279.150]: master offset 5771 s2 freq +32316 path delay -3002
ptp4l[5279.213]: master offset 4388 s2 freq +30526 path delay -3002
ptp4l[5279.275]: master offset -30434 s2 freq -28485 path delay -3002
ptp4l[5279.338]: master offset -28041 s2 freq -27412 path delay -3002
ptp4l[5279.400]: master offset 7870 s2 freq +31118 path delay -3002
Fixes: 3a7496234d17 ("ice: implement basic E822 PTP support")
Reviewed-by: Milena Olech <milena.olech@intel.com>
Signed-off-by: Przemyslaw Korba <przemyslaw.korba@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Mask admin command returned max phase adjust value for both input and
output pins. Only 31 bits are relevant, last released data sheet wrongly
points that 32 bits are valid - see [1] 3.2.6.4.1 Get CCU Capabilities
Command for reference. Fix of the datasheet itself is in progress.
Fix the min/max assignment logic, previously the value was wrongly
considered as negative value due to most significant bit being set.
Example of previous broken behavior:
$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/dpll.yaml \
--do pin-get --json '{"id":1}'| grep phase-adjust
'phase-adjust': 0,
'phase-adjust-max': 16723,
'phase-adjust-min': -16723,
Correct behavior with the fix:
$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/dpll.yaml \
--do pin-get --json '{"id":1}'| grep phase-adjust
'phase-adjust': 0,
'phase-adjust-max': 2147466925,
'phase-adjust-min': -2147466925,
[1] https://cdrdv2.intel.com/v1/dl/getContent/613875?explicitVersion=true
Fixes: 90e1c90750d7 ("ice: dpll: implement phase related callbacks")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
During fuzz testing, the following warning was discovered:
different return values (15 and 11) from vsnprintf("%*pbl
", ...)
test:keyward is WARNING in kvasprintf
WARNING: CPU: 55 PID: 1168477 at lib/kasprintf.c:30 kvasprintf+0x121/0x130
Call Trace:
kvasprintf+0x121/0x130
kasprintf+0xa6/0xe0
bitmap_print_to_buf+0x89/0x100
core_siblings_list_read+0x7e/0xb0
kernfs_file_read_iter+0x15b/0x270
new_sync_read+0x153/0x260
vfs_read+0x215/0x290
ksys_read+0xb9/0x160
do_syscall_64+0x56/0x100
entry_SYSCALL_64_after_hwframe+0x78/0xe2
The call trace shows that kvasprintf() reported this warning during the
printing of core_siblings_list. kvasprintf() has several steps:
(1) First, calculate the length of the resulting formatted string.
(2) Allocate a buffer based on the returned length.
(3) Then, perform the actual string formatting.
(4) Check whether the lengths of the formatted strings returned in
steps (1) and (2) are consistent.
If the core_cpumask is modified between steps (1) and (3), the lengths
obtained in these two steps may not match. Indeed our test includes cpu
hotplugging, which should modify core_cpumask while printing.
To fix this issue, cache the cpumask into a temporary variable before
calling cpumap_print_{list, cpumask}_to_buf(), to keep it unchanged
during the printing process.
Fixes: bb9ec13d156e ("topology: use bin_attribute to break the size limitation of cpumap ABI")
Cc: stable <stable@kernel.org>
Signed-off-by: Li Huafei <lihuafei1@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20241114110141.94725-1-lihuafei1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Enable basic 128b/132b SST functionality without compression. Reuse
intel_dp_mtp_tu_compute_config() to figure out the TU after we've
determined we need to use an UHBR rate.
It's slightly complicated as the M/N computation is done in different
places in MST and SST paths, so we need to avoid trashing the values
later for UHBR.
If uncompressed UHBR fails, we drop to compressed non-UHBR, which is
quite likely to fail as well. We still lack 128b/132b SST+DSC.
We need mst_master_transcoder also for 128b/132b SST. Use cpu_transcoder
directly. Enhanced framing is "don't care" for 128b/132b link.
v2: mst_master_transcoder, enhanced framing (Imre)
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/084e4e05bf25a5dd396dd391014943d42b11c88d.1735912293.git.jani.nikula@intel.com
|
|
128b/1232b SST will have mst_master_transcoder set and matching
cpu_transcoder. Ensure disable also for 128b/132b SST.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Co-developed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/eaf705b3490d828ba33e85f40a7794d58de7c5ad.1735912293.git.jani.nikula@intel.com
|
|
We'll only ever get here in MST mode from MST stream encoders; the
primary encoder's ->get_config() won't be called when we've detected
it's MST.
v2: Read mst_master_transcoder in 128b/132b SST path (Imre)
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/436854c0bb6ab5c14c3d3837694ea60ac2fbaba2.1735912293.git.jani.nikula@intel.com
|
|
We'll want to distinguish 128b/132b SST and MST modes at state
readout. There's a catch, though. From the hardware perspective,
128b/132b SST and MST programming are pretty much the same. And we can't
really ask the sink at this point.
If we have more than one transcoder in 128b/132b mode associated with
the port, we can safely assume it's MST. But for MST with only a single
stream enabled, we are pretty much out of luck. Let's fall back to
looking at the software state, i.e. intel_dp->is_mst. It should be fine
for the state checker, but for hardware takeover at probe, we'll have to
trust the GOP has only enabled SST.
TODO: Not sure how this *or* our current code handles 128b/132b enabled
by GOP.
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/119a773a0d4d74ad204435e462f8d12cb0ea4128.1735912293.git.jani.nikula@intel.com
|
|
Add ACT handling for 128b/132b SST enable/disable.
This is preparation for enabling 128b/132b SST. This path is not
reachable yet.
v2:
- Check for !is_hdmi (Imre)
- Add disable sequence (Imre)
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b0226471f9445d988917cee49dbbd93a1493f3c7.1735912293.git.jani.nikula@intel.com
|
|
Write the DP2 specific VFREQ registers.
This is preparation for enabling 128b/132b SST. This path is not
reachable yet.
v2: Check for !is_hdmi (Imre)
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7d90547e9ce01642b722efca0bf81cadb754e790.1735912293.git.jani.nikula@intel.com
|
|
Write the payload allocation table for 128b/132b SST. Use VCPID 1 and
start from slot 0, with dp_m_n.tu slots.
This is preparation for enabling 128b/132b SST. This path is not
reachable yet. Indeed, we don't yet compute TU for 128b/132b SST.
v2: Handle drm_dp_dpcd_write_payload() failures (Imre)
v3: Include drm_dp_helper.h (kernel test robot)
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250107095414.1244286-1-jani.nikula@intel.com
|
|
It's not very clearly specified, and the hardware bit is ill-named, but
128b/132b SST also needs the MST mode set in the DP_TP_CTL register.
This is preparation for enabling 128b/132b SST. This path is not
reachable yet.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b29fbba8c979a8bab2bf03088610fe408faaf704.1735912293.git.jani.nikula@intel.com
|
|
128b/132b SST needs 128b/132b mode enabled in the TRANS_DDI_FUNC_CTL
register.
This is preparation for enabling 128b/132b SST. This path is not
reachable yet.
v2: Use the MST path instead of SST to also set transport select (Imre)
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/122ebeadf4bf0870fc26b7d12abdff88f4be8799.1735912293.git.jani.nikula@intel.com
|
|
Handle 128b/132b SST in intel_dp_mtp_tu_compute_config(). The remote
bandwidth overhead and time slot allocation are only relevant for MST;
SST only needs the local bandwidth and a check that 64 slots isn't
exceeded.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b59c94b0aac2c073b0306c0a0040b26330f94260.1735912293.git.jani.nikula@intel.com
|
|
Extract intel_dp_mtp_tu_compute_config() for figuring out the TU. Move
the link configuration and mst state access to the callers. This will be
easier to adapt to 128b/132b SST.
v2: Don't add SST stuff here yet
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c3ea8370c9bd3cdc579159e68a63f4ed2fadc66a.1735912293.git.jani.nikula@intel.com
|
|
The crtc_state->pbn member is only used as a temporary variable within
mst_stream_find_vcpi_slots_for_bpp(). Remove it as unnecessary.
Suggested-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/726aaadbd425057dfd854e42417bcf8d69b769d3.1735912293.git.jani.nikula@intel.com
|
|
The callers of mst_stream_find_vcpi_slots_for_bpp() don't need the
returned slots for anything. On the contrary, they need to jump through
hoops to just distinguish between success and failure. Just return 0
instead of slots from mst_stream_find_vcpi_slots_for_bpp() for success,
and simplify the callers.
There's a pointless ret local variable that we can drop in the process.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7b3671a548c893b1bb62151d41f90bb8ce842ccc.1735912293.git.jani.nikula@intel.com
|
|
intel_dp_mst_compute_m_n() doesn't need the connector. Remove the
parameter.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/eec2e9a2e2dc3d166ac94bb9de691246a14d3945.1735912293.git.jani.nikula@intel.com
|
|
intel_dp_mst_bw_overhead() doesn't need the connector. Remove the
parameter.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e1379aca0748e392d8a232135b823deec783e829.1735912293.git.jani.nikula@intel.com
|
|
The struct drm_dp_mst_topology_mgr *mgr parameter is only used for debug
logging in case the passed in link rate or lane count are zero. There's
no further error checking as such, and the function returns 0.
There should be no case where the parameters are zero. The returned
value is generally used as a divisor, and if we were hitting this, we'd
be seeing division by zero.
Just remove the debug logging altogether, along with the mgr parameter,
so that the function can be used in non-MST contexts without the
topology manager.
v2: Also remove drm_dp_mst_helper_tests_init as unnecessary (Imre)
Cc: Imre Deak <imre.deak@intel.com>
Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/72d77e7a7fe69c784e9df048b7e6f250fd7599e4.1735912293.git.jani.nikula@intel.com
|
|
Backmerge to get the DRM DP payload and ACT helpers to drm-intel-next.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
Core Changes:
- drm/print: add drm_print_hex_dump()
Driver Changes:
- HDCP fixes and updates for Xe3lpd and for HDCP 1.4 (Suraj)
- Add dedicated lock for each sideband (Jani)
- New GSC FW for ARL-H and ARL-U (Daniele)
- Add support for 3 VDSC engines 12 slices (Ankit)
- Sanitize MBUS joining (Ville)
- Fixes in DP MST (Imre)
- Stop using pixel_format_from_register_bits() to parse VBT (Ville)
- Declutter CDCLK code (Ville)
- PSR clean up and fixes (Jouni, Jani, Animesh)
- DMC wakelock - Fixes and enablement for Xe3_LPD (Gustavo)
- Demote source OUI read/write failure logging to debug (Jani)
- Potential boot oops fix and some general cleanups (Ville)
- Scaler code cleanups (Ville)
- More conversion towards struct intel_display and general cleanups (Jani)
- Limit max compressed bpp to 18 when forcing DSC (Ankit)
- Start to reconcile i915's and xe's display power mgt sequences (Rodrigo)
- Some correction in the DP Link Training sequence (Arun)
- Avoid setting YUV420_MODE in PIPE_MISC on Xe3lpd (Ankit)
- MST and DDI cleanups and refactoring (Jani)
- Fixed an typo in i915_gem_gtt.c (Zhang)
- Try to make DPT shrinkable again (Ville)
- Try to fix CPU MMIO fails during legacy LUT updates (Ville)
- Some PPS cleanups (Ville, Jani)
- Use seq buf for printing rates (Jani)
- Flush DMC wakelock release work at the end of runtime suspend (Gustavo)
- Fix NULL pointer dereference in capture_engine (Eugene)
- Fix memory leak by correcting cache object name in error handler (Jiasheng)
- Small refactor in WM/DPKGC for modifying latency programmed into PKG_C_LATENCY (Suraj)
- Add drm_printer based hex dumper and use it (Jani)
- Move g4x code to specific g4x functions (Jani)
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
[sima: conflict in intel_dp_mst.c due to conversion to
drm_connector_dynamic_init that landed through drm-misc]
Link: https://patchwork.freedesktop.org/patch/msgid/Z1n4VhatZpvT5xKs@intel.com
|
|
Fixup the uc_attr_mem_limit test case to also cover the
KVM_HAS_DEVICE_ATTR ioctl.
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Tested-by: Hariharan Mari <hari55@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20241216092140.329196-7-schlameuss@linux.ibm.com
Message-ID: <20241216092140.329196-7-schlameuss@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
Add a selftests for the interrupt routing configuration when using
ucontrol VMs.
Calling the test may trigger a null pointer dereferences on kernels not
containing the fixes in this patch series.
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Tested-by: Hariharan Mari <hari55@linux.ibm.com>
Reviewed-by: Hariharan Mari <hari55@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20241216092140.329196-5-schlameuss@linux.ibm.com
Message-ID: <20241216092140.329196-5-schlameuss@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
Prevent null pointer dereference when processing
KVM_IRQ_ROUTING_S390_ADAPTER routing entries.
The ioctl cannot be processed for ucontrol VMs.
Fixes: f65470661f36 ("KVM: s390/interrupt: do not pin adapter interrupt pages")
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Tested-by: Hariharan Mari <hari55@linux.ibm.com>
Reviewed-by: Hariharan Mari <hari55@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20241216092140.329196-4-schlameuss@linux.ibm.com
Message-ID: <20241216092140.329196-4-schlameuss@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
Add some superficial selftests for the floating interrupt controller
when using ucontrol VMs. These tests are intended to cover very basic
calls only.
Some of the calls may trigger null pointer dereferences on kernels not
containing the fixes in this patch series.
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Tested-by: Hariharan Mari <hari55@linux.ibm.com>
Reviewed-by: Hariharan Mari <hari55@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20241216092140.329196-3-schlameuss@linux.ibm.com
Message-ID: <20241216092140.329196-3-schlameuss@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
Prevent null pointer dereference when processing the
KVM_DEV_FLIC_APF_ENABLE and KVM_DEV_FLIC_APF_DISABLE_WAIT ioctls in the
interrupt controller.
Fixes: 3c038e6be0e2 ("KVM: async_pf: Async page fault support on s390")
Reported-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Reviewed-by: Hariharan Mari <hari55@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20241216092140.329196-2-schlameuss@linux.ibm.com
Message-ID: <20241216092140.329196-2-schlameuss@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
In commit 77b533411595 ("KVM: s390: VSIE: sort out virtual/physical
address in pin_guest_page"), only pin_scb() has been updated. This
means that in unpin_scb() a virtual address was still used directly as
physical address without conversion. The resulting physical address is
obviously wrong and most of the time also invalid.
Since commit d0ef8d9fbebe ("KVM: s390: Use kvm_release_page_dirty() to
unpin "struct page" memory"), unpin_guest_page() will directly use
kvm_release_page_dirty(), instead of kvm_release_pfn_dirty(), which has
since been removed.
One of the checks that were performed by kvm_release_pfn_dirty() was to
verify whether the page was valid at all, and silently return
successfully without doing anything if the page was invalid.
When kvm_release_pfn_dirty() was still used, the invalid page was thus
silently ignored. Now the check is gone and the result is an Oops.
This also means that when running with a V!=R kernel, the page was not
released, causing a leak.
The solution is simply to add the missing virt_to_phys().
Fixes: 77b533411595 ("KVM: s390: VSIE: sort out virtual/physical address in pin_guest_page")
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Nico Boehr <nrb@linux.ibm.com>
Link: https://lore.kernel.org/r/20241210083948.23963-1-imbrenda@linux.ibm.com
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-ID: <20241210083948.23963-1-imbrenda@linux.ibm.com>
|
