| Age | Commit message (Collapse) | Author |
|---|
|
We can embed range_changed to the extent changeset to address following
problems:
- no need to allocate ulist dynamically, we also get rid of the GFP_NOFS
for free
- fix lack of allocation failure checking in btrfs_qgroup_reserve_data
The stack consuption where extent_changeset is used slightly increases:
before: 16
after: 16 - 8 (for pointer) + 32 (sizeof ulist) = 40
Which is bearable.
Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Make ulist_fini externally visible so the ulist API is complete.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Internal helper.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We do a readahead of the free space cache inode to speed things up but
the failure is not fatal, like in other readahead cases. Proper reads
would need to happen anyway and any errors would be caught there.
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Qgroup relations are added/deleted from ioctl, we hold the high level
qgroup lock, no deadlocks or recursion from the allocation possible
here.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We don't need to use GFP_NOFS here as this is called from ioctls an the
only lock held is the subvol_sem, which is of a high level and protects
creation/renames/deletion and is never held in the writeout paths.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The qgroup config is read during mount, we do not have to use NOFS.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We don't need to use GFP_NOFS here as this is called from ioctls an the
only lock held is the subvol_sem, which is of a high level and protects
creation/renames/deletion and is never held in the writeout paths.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
As 0 refers to an existing type BTRFS_ORDERED_IO_DONE, this specifies a
new type 'REGULAR' for regular IO.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We have similar codes to create and insert extent mapping around IO path,
this merges them into a single helper.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This uses a helper instead of open code around used byte of space_info
everywhere.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We don't need to take the lock if the block group has not been cached.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The original csum error message only outputs inode number, offset, check
sum and expected check sum.
However no root objectid is outputted, which sometimes makes debugging
quite painful under multi-subvolume case (including relocation).
Also the checksum output is decimal, which seldom makes sense for
users/developers and is hard to read in most time.
This patch will add root objectid, which will be %lld for rootid larger
than LAST_FREE_OBJECTID, and hex csum output for better readability.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
If btrfs_bio_alloc fails in submit_extent_page, submit_extent_page returns
without clearing the writeback bit of the failed page.
__extent_writepage_io, that is a caller of submit_extent_page,
does not clear the remaining writeback bit anywhere.
As a result, this will cause the hang at filemap_fdatawait_range,
because it waits the writeback bit to be cleared from the failed page.
So, we have to call end_page_writeback to clear the writeback bit.
For reproducing the hang, we inject a fault like
if (should_failtest()) { // I define should_failtest()
bio = NULL;
}
else {
bio = btrfs_bio_alloc(...);
}
in submit_extent_page.
We should also check whether page has the bit before end_page_writeback,
to avoid the conflict against the other end_page_writeback in bio_endio.
Thus, we add PageWriteback checks not only in __extent_writepage_io,
but also in write_one_eb too, because it misses the check.
Signed-off-by: Takafumi Kubota <takafumi.kubota1012@sslab.ics.keio.ac.jp>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Cc: David Sterba <dsterba@suse.cz>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Commit "btrfs: ulist: Add ulist_del() function" (d4b804045924d7f8)
removed some debugging code but left the structure defintions.
Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Since we have a helper to set page bits, let lock_delalloc_pages and
__unlock_for_delalloc use it.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ changes to the helper separated from the following patch ]
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
configurable LRC and BCLK divide. The driver
will make configurations of LRC and BCLK automatically according to
BCLK and FS information in master mode.
Signed-off-by: John Hsu <KCHSU0@nuvoton.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
- Rework of the secure boot code, in preparation for GP10x secure boot.
- Improvements to channel recovery
- Initial power budget code
- Some preparation for an upcoming MMU rework (probably 4.12)
- Misc other fixes.
* 'linux-4.11' of git://github.com/skeggsb/linux: (88 commits)
drm/nouveau/tmr: provide backtrace when a timeout is hit
drm/nouveau/pci/g92: Fix rearm
drm/nouveau/drm/therm/fan: add a fallback if no fan control is specified in the vbios
drm/nouveau/hwmon: expose power_max and power_crit
drm/nouveau/iccsense: Parse max and crit power level
drm/nouveau/bios/power_budget: Add basic power budget parsing
drm/nouveau/fifo/gk104-: preempt recovery
drm/nouveau/fifo/gk104-: trigger mmu fault before attempting engine recovery
drm/nouveau/fifo/gk104-: ACK SCHED_ERROR before attempting CTXSW_TIMEOUT recovery
drm/nouveau/fifo/gk104-: directly use new recovery code for ctxsw timeout
drm/nouveau/fifo/gk104-: directly use new recovery code for mmu faults
drm/nouveau/fifo/gk104-: reset all engines a killed channel is still active on
drm/nouveau/fifo/gk104-: refactor recovery code
drm/nouveau/fifo/gk104-: better detection of chid when parsing engine status
drm/nouveau/fifo/gk104-: separate out engine status parsing
drm/nouveau/fifo: add an api for initiating channel recovery
drm/nouveau/top: add function to translate subdev index to mmu fault id
drm/nouveau/gr/gf100-: implement chsw_load() method
drm/nouveau/gr: implement chsw_load() method
drm/nouveau/core: add engine method to assist in determining chsw direction
...
|
|
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
704a6c008b7942bb7f30bb43d2a6bcad7f543662 broke pci msi rearm for g92 GPUs.
g92 needs the nv46_pci_msi_rearm, where g94+ gpus used nv40_pci_msi_rearm.
Reported-by: Andrew Randrianasulu <randrianasulu@gmail.com>
Signed-off-by: Karol Herbst <karolherbst@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org
|
|
the vbios
This seems to be absolutely necessary for a lot of NV40.
Reported-by: gsgf on IRC/freenode
Signed-off-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Signed-off-by: Karol Herbst <karolherbst@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Signed-off-by: Karol Herbst <karolherbst@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
v2: Set entry to 0xff if not found
Add cap entry for ver 0x30 tables
Rework to fix memory leak
v3: More error checks
Simplify check for invalid entries
v4: disable for ver 0x10 for now
move assignments after the second last return
Signed-off-by: Karol Herbst <karolherbst@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Greatly improves the chances of recovering the GPU from a CTXSW_TIMEOUT.
Tested with piglit's arb_shader_image_load_store-atomicity, which causes
GR to hang in such a way that recovery failed (CTXSW_TIMEOUT continually
re-triggers).
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
recovery
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
This will serve as a basis for implementing some improvements to how
we recover the GPU from channel errors.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
The previous commit simply changes the interface, but should result in
the same behaviour as previously. This commit has been split out from
it as it can result in a different channel being selected.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
We'll be wanting to reuse this logic in more places.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
This will be used by callers outside of fifo interrupt handlers.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
FIFO gives us load/save/switch status, and we need to be able to determine
which direction a "switch" is failing during channel recovery.
In order to do this, we apparently need to query the engine itself.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
This prevents *very* long waits while attempting to destroy channels
after a fault has occurred.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
These will be used to improve error recovery behaviour.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
There are instances (such as non-recoverable GPU page faults) where
NVKM decides that a channel's context is no longer viable, and will
be removed from the runlist.
This commit notifies the owner of the channel when this happens, so
it has the opportunity to take some kind of recovery action instead
of hanging.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
If the led class registration fails, we free drm->led but do not reset
it to NULL, which means that the suspend/resume/fini function will act
as if everything went well in init() and will likely crash the kernel.
This patch adds the missing drm->led = NULL.
Reported-by: Emmanuel Pescosta <emmanuelpescosta099@gmail.com>
Signed-off-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Tested on a G92, seems to work. Confirmed by 8 mmiotraces.
Signed-off-by: Karol Herbst <karolherbst@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Signed-off-by: Karol Herbst <karolherbst@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
The issue was recorded in fd.o bug 27501, not 25701.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
