Age | Commit message (Collapse) | Author |
|
For some reason, <32-bit reads do not work on Apple ARM64 platforms with
these chips (even though they do on other PCIe devices). Issue them as
32-bit reads instead. This is done unconditionally, as it shouldn't hurt
even if not necessary.
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Hector Martin <marcan@marcan.st>
Link: https://lore.kernel.org/r/20211215161045.38843-3-marcan@marcan.st
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
This is required on some Apple ARM64 laptops using this controller.
As is typical on DT platforms, pull these quirks from the device tree
using the standard mmc bindings.
See Documentation/devicetree/bindings/mmc/mmc-controller.yaml
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Hector Martin <marcan@marcan.st>
Link: https://lore.kernel.org/r/20211215161045.38843-2-marcan@marcan.st
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Sparse spits out this following warning:
drivers/mmc/core/queue.c:311:21: warning: incorrect type in assignment (different base types)
drivers/mmc/core/queue.c:311:21: expected int ret
drivers/mmc/core/queue.c:311:21: got restricted blk_status_t [usertype]
drivers/mmc/core/queue.c:314:21: warning: incorrect type in assignment (different base types)
drivers/mmc/core/queue.c:314:21: expected int ret
drivers/mmc/core/queue.c:314:21: got restricted blk_status_t [usertype]
drivers/mmc/core/queue.c:336:16: warning: incorrect type in return expression (different base types)
drivers/mmc/core/queue.c:336:16: expected restricted blk_status_t
drivers/mmc/core/queue.c:336:16: got int [assigned] ret
ret is only used for blk_status_t types, so make it that type.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211215011336.194089-1-joel@jms.id.au
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Use feedback clock for HS200 mode, as for SDR104.
The HS200 mode can be enabled through DT by using mmc-hs200-1_8v.
It is possible to use it on STM32MP13, but not STM32MP15 platforms.
Signed-off-by: Ludovic Barre <ludovic.barre@foss.st.com>
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20211215141727.4901-5-yann.gautier@foss.st.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The variant->f_max is dependent on the IP, not on the SoC where it is
embedded. Set the max frequency of its source clock to 267MHz.
The frequency used will be limited by the IOs max frequency, set in the
SoC device tree.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20211215141727.4901-3-yann.gautier@foss.st.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The change is only hardware, and does not need driver change:
Added hardware flow control during transmit packet with variable delay.
The new id is then added to the ids list structure.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20211215141727.4901-2-yann.gautier@foss.st.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
|
|
During test campaign, and especially after several unbind/bind sequences,
it has been seen that the SD-card on SDMMC1 thread could freeze.
The freeze always appear on a CMD23 following a CMD19.
Checking SDMMC internal registers shows that the tuning command (CMD19)
has failed.
The freeze is then due to the delay block involved in the tuning sequence.
To correct this, clear the delay block register DLYB_CR register after
the tuning commands.
Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com>
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Fixes: 1103f807a3b9 ("mmc: mmci_sdmmc: Add execute tuning with delay block")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20211215141727.4901-4-yann.gautier@foss.st.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Although this compatible is not used in kernel, as we use the common
MMCI driver, it is used by bootloaders. The U-Boot driver was merged
before the kernel driver and uses this compatible.
To avoid issues when aligning device tree files between kernel and
boot loader, the ST dedicated compatible is added to bindings file.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211210091834.28958-1-yann.gautier@foss.st.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Some ARM64 Exynos SoCs have MCT timer block, e.g. Exynos850 and
Exynos5433. CLKSRC_EXYNOS_MCT option is not visible unless COMPILE_TEST
is enabled. Select CLKSRC_EXYNOS_MCT option for ARM64 ARCH_EXYNOS like
it's done in arch/arm/mach-exynos/Kconfig, to enable MCT timer support
for ARM64 Exynos SoCs.
Even though ARM architected timer is available on all ARM64 SoCs, and
used for managing timer hardware and clock source events, MCT timer
still can be used as a wakeup source, as stated in commitae460fd9164b
("clocksource/drivers/exynos_mct: Prioritise Arm arch timer on arm64").
It's also nice to be able to test available MCT IP-core.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/r/20211101193531.15078-3-semen.protsenko@linaro.org
Link: https://lore.kernel.org/r/20211220165004.17005-2-krzysztof.kozlowski@canonical.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The Fresco Logic FL1100 controller needs the TRUST_TX_LENGTH quirk like
other Fresco controllers, but should not have the BROKEN_MSI quirks set.
BROKEN_MSI quirk causes issues in detecting usb drives connected to docks
with this FL1100 controller.
The BROKEN_MSI flag was apparently accidentally set together with the
TRUST_TX_LENGTH quirk
Original patch went to stable so this should go there as well.
Fixes: ea0f69d82119 ("xhci: Enable trust tx length quirk for Fresco FL11 USB controller")
Cc: stable@vger.kernel.org
cc: Nikolay Martynov <mar.kolya@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20211221112825.54690-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
i2c-s3c2410 driver is needed for some arm64 Exynos SoCs, e.g. Exynos850.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20211121150558.21801-1-semen.protsenko@linaro.org
Link: https://lore.kernel.org/r/20211220165004.17005-1-krzysztof.kozlowski@canonical.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The variable rc is being initialized with a value that is never read, it
is being updated later on. The assignment is redundant and thus remove
it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20211126221848.1125321-1-colin.i.king@gmail.com
|
|
The shared area is a DMA memory allocated in the host and
mapped so that the host and the CSME firmware can
exchange data. It is mapped through a dedicated PCI device
that is driven by the mei bus driver.
The bus driver is in charge of allocating and mapping this
memory. It also needs to configure the CSME firmware with
a specific set of commands, so that the CSME firmware will
know that this memory is meant to be used by its internal
WLAN module.
For this, the CSME firmware first needs to completely
initialize its WLAN module and only then get the mapping
request.
The problem is that the mei bus enumeration completes
before the WLAN is completely ready. This means that
the WLAN module's initialization is racing with iwlmei's
allocation and mapping flow.
Testing showed a problem in resume flows where iwlmei
was too fast and the DMA mapping failed.
Add a delay to avoid this. This is still racy, but our
measurements showed that we have a good margin and we
should now be safe.
Fixes: 2da4366f9e2c ("iwlwifi: mei: add the driver to allow cooperation with CSME")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211220142940.8b6279e3d0be.I6fe128b0b86149a85535104822c8355b367887c8@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
When the driver is unregistered, CSME will take ownership on the
device. Reflect this in the iwlmei object so that we will remember
to re-ask for ownership when the driver will register again.
Not doing so will cause CSME not to give the host ownership and
we will see the following error message when trying to bring up
the interface:
iwlwifi 0000:a9:00.0: iwl_pcie_prepare_card_hw iwl_trans_prepare_card_hw enter
iwlwifi 0000:a9:00.0: iwl_pcie_set_hw_ready hardware not ready
iwlwifi 0000:a9:00.0: iwl_pcie_set_hw_ready hardware not ready
iwlwifi 0000:a9:00.0: iwl_pcie_prepare_card_hw Couldn't prepare the card but SAP is connected
iwlwifi 0000:a9:00.0: Error while preparing HW: -16
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211220142940.c7bb5b7644df.I48498d9fd6e3959562205af67aa5f1a822eb762d@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
NIC has been grabbed for reading twice which is leading
to NIC hang. Code correction are done for reading data with
no grab function.
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211219132536.55527214f8c9.I1748215ccb3fa20a3491a46a49b12e04eb560ac6@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
Some devices also use iwl_scan_config_v2 struct, so link it in
the documentation for SCAN_CFG_CMD. Fix a bunch of kernel-doc
as well.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211219132536.3331df94b106.If6c96b0d386e1c5988c8da6b69257e8f2e737f07@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
In some rare cases when the HW is in a bad state, we may get this
interrupt when prph_info is not set yet. Then we will try to
dereference it to check the sleep_notif element, which will cause an
oops.
Fix that by ignoring the interrupt if prph_info is not set yet.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211219132536.0537aa562313.I183bb336345b9b3da196ba9e596a6f189fbcbd09@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
This notification ID was actually used for something else we
never implemented, but luckily we only had some debug code
here. Just remove it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211219132536.a67b5b9db259.Ic55b306fcd2a3525b3993f4b7e00622dd95053ba@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
There's little value in this warning, we get a warning here
if firmware passes us a short packet, particularly in monitor
mode.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211219132536.305d12cf51ac.I2e4e6874113b1e5d8ee467b8a2d90820cc6ddde9@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
When IWL_UCODE_TLV_CAPA_SESSION_PROT_CMD is set, removing a time event
always tries to cancel session protection. However, AUX ROC does
not use session protection so it was never removed. As a result,
if the driver tries to allocate another AUX ROC event right after
cancelling the first one, it will fail with a warning.
In addition, the time event data passed to iwl_mvm_remove_aux_roc_te()
is incorrect. Fix it.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211219132536.915e1f69f062.Id837e917f1c2beaca7c1eb33333d622548918a76@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
Currently we always return the op_mode with valid pointer in case
getting NVM failed, while it's only relevant for cases that CSME is the
owner of the nic.
Fix this by checking also who's the owner of the nic.
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211219132536.b1e96021b616.Id0164855f2dd01ecdecf79b239d6ee5974882245@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
Support TX checksum offload for Bz devices, where we have full
checksum offload (NETIF_F_HW_CSUM) and the hardware doesn't
need to parse the IP headers or anything.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211219132536.c0f44c98b36d.I75a688f3ac80cbe824c459ece4bb67843b9fce76@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
If OEM isn't in the allowed list, TAS should be disabled in US/CA.
Currently, if the OEM isn't allowed - we're sending the TAS only
if we are not in US or CA.
But this country check is done before we even know the country
(usually the configuration is ZZ in that stage).
So do the following instead:
1. Check if the current OEM is in the allowed list
2. If not - add US and CA to tas_block_list_array
3. Send the TAS table to FW.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
Set scan offload profiles auth algorithms with valid
algorithms only.
Signed-off-by: Ayala Beker <ayala.beker@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211219132536.525f2d468d22.I4d497d6a0a14ffb833f7edc7e980d26bbf8d7527@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
Don't use protected ranging negotiation for FTM ranging as responders
that support only FTM ranging don't expect the FTM request to be
protected.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Fixes: 517a5eb9fab2 ("iwlwifi: mvm: when associated with PMF, use protected NDP ranging negotiation")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211219132536.f50ed0e3c6b3.Ibff247ee9d4e6e0a1a2d08a3c8a4bbb37e6829dd@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
add killer subsystem devices from the 1675i and 1675s family
to the driver.
Signed-off-by: Yaara Baruch <yaara.baruch@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211219132536.2d5bec2d7b68.Icffb4e27390e6a5c76a0cbe7abf7472558f323d6@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
The 6GHz passive scan is performed only once every 50 minutes.
However, in case of suspend/resume, the regulatory information
is reset, so 6GHz channels may become disabled.
Fix it by performing a 6GHz passive scan within 60 seconds after
suspend/resume even if the 50 minutes timeout did not expire yet.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Fixes: e8fe3b41c3a3 ("iwlwifi: mvm: Add support for 6GHz passive scan")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211219121514.6d5c043372cf.I251dd5618a3f0b8febbcca788eb861f1cd6039bc@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
In case of forced passive scan on a UHB channel,
don't set the direct probe option for this channel.
Signed-off-by: Ayala Beker <ayala.beker@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211219121514.0ede76a9ca92.Ie64a4df79ea9c485ae3d2fc043319e8f79cefa8e@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
In case of a conflict between BIOS version and FW
version of the PPAG table - the values arrive in the FW in the wrong
places. This happens because we're storing the table in different
structures depending on the BIOS version, not on the FW version,
and so the FW doesn't get what it expect to.
Always store the table in a v2 structure (which is a superset
of v1 and v0).
Also store the table in a structured way and in it's own structure,
rather then storing it in the ppag command structure, similarly to
the WRDS, EWRD and WGDS tables.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211219121514.793a509da7bd.Ia176746a28b816b5f788cce9a281139735909e2a@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
Start supporting API version 69 for AX devices.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211219121514.7d8fe0dffaea.I2de65c1efd9ab464d4158a3d852f73efe63024f8@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
The RADA might include in the Rx frame the MIC and CRC bytes.
These bytes should be removed for non monitor interfaces and
should not be passed to mac80211.
Fix the Rx processing to remove the extra bytes on non monitor
cases.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211219121514.098be12c801e.I1d81733d8a75b84c3b20eb6e0d14ab3405ca6a86@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
In some cases the sta is being removed twice since we do not test the
roc aux running before removing it. Start looking at the bit before
removing the sta.
Signed-off-by: Nathan Errera <nathan.errera@intel.com>
Fixes: 2c2c3647cde4 ("iwlwifi: mvm: support ADD_STA_CMD_API_S ver 12")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211219121514.d5376ac6bcb0.Ic5f8470ea60c072bde9d1503e5f528b65e301e20@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
The FW API for PER_CHAIN_LIMIT_OFFSET_CMD is misleading. The element
name is table_rev, but it shouldn't actually contain the table
revision number, but whether we should use the South Korea scheme or
not.
Fix the driver so that we only set this value to either 0 or 1. It
will only be 1 (meaning South Korea) if the ACPI WGDS table revision
is 1.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Fixes: 664c011b763e ("iwlwifi: acpi: support reading and storing WGDS revision 2")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211219121514.abed3b8119c7.I1fdc2c14577523fcffdfe8fb5902c2d8efde7e09@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
Support resetting the firmware via TLV-based debugging. When applied,
this will cause the driver to reset the firmware when the debugging
is triggered.
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211219121514.d59b29653a1e.I7b3be4a1ad1a9d5d0e86259740e89ac113c9348b@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
Increment the threshold to avoid dropping too eagerly.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211219121514.0e947ed458c4.Ia376cbea5f59df4b4474f0bd33ab033e84535cce@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
We don't really have much reason to mistrust the hardware
queue number, but if it gets mixed up we still don't want
to access some data out of bounds, so drop such frames.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211219121514.539aecb91247.I6e555a5185bad30d7d1a4659f9c0b99325425f18@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
On Bz devices, the hardware checksums including the SNAP header,
starting directly after the MAC header, so we don't need the
extra checks and can just pass the checksum to mac80211.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211219121514.8ef59da4e05e.Ide87c2dc8fa08eae55c013a625f4ece5184b1b63@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
For the upcoming Bz devices, we will set NETIF_F_HW_CSUM instead
of NETIF_F_IP_CSUM and NETIF_F_IPV6_CSUM. However, we still need
to be able to remove all the checksum bits, so add a mask for the
removal, and keep the old define for the feature advertisement.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211219121514.f05488ce8b83.I65bb83721498d8433e4ee2b09415eb74ab579445@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
When CONFIG_DEBUG_TEST_DRIVER_REMOVE is set, iwlwifi crashes
when the opmode module cannot be loaded, due to completing
the completion before using drv->dev, which can then already
be freed.
Fix this by removing the (fairly useless) message. Moving the
completion later causes a deadlock instead, so that's not an
option.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/20211210091245.289008-2-luca@coelho.fi
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
Isolate the entire calculation of the offload_assist field used
for HW checksumming to the iwl_mvm_tx_csum function.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211210110539.796ae29c90d9.Icb2f07905bebd9ed4537ca4c453069211ea71799@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
In case the fw supports OCE scan and one of the OCE feature flags
are set in the scan request, set the corresponding flag in the
firmware scan request.
Note that new firmware that indicates OCE support does not support
the probe deferral and suppression feature (which is optional).
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211210110539.3dd63c381839.Id79b39f650103bb9b851e31ed6a0178e81988587@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
If firmware load fails after having loaded some parts of the
firmware, e.g. the IML image, then this would leak. For the
host command list we'd end up running into a WARN on the next
attempt to load another firmware image.
Fix this by calling iwl_dealloc_ucode() on failures, and make
that also clear the data so we start fresh on the next round.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211210110539.1f742f0eb58a.I1315f22f6aa632d94ae2069f85e1bca5e734dce0@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
Debug TLV parsing was missing size checks, so if a valid but
too short TLV was encountered, it would attempt to read it.
If the firmware file was arranged to be a multiple of pages
long with this happening just before the end, it could crash
reading out-of-bounds of a vmalloc area.
Fix this by adding the relevant size check.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211210110539.84848da8067f.Ifb4f80c95d283ec62e495a7928069af711b5fee2@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
On a 32-bit build, the division here needs to be done
using do_div(), otherwise the compiler will try to call
a function that doesn't exist, thus failing to build.
Fixes: b68bd2e3143a ("iwlwifi: mvm: Add FTM initiator RTT smoothing logic")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211219111352.e56cbf614a4d.Ib98004ccd2c7a55fd883a8ea7eebd810f406dec6@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
There's another set of error tables on newer (Bz) hardware,
support finding and dumping those error tables if present.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211210110539.c727a975b434.Ie5ad3fd974b700f1b90867b2b52ef7607799e8fe@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
There can be two TCMs in a given device, dump both of the
error tables if present.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211210110539.887cba319301.Ifdc3f617f7e0e3e39c90e8c208e60f11b3bb9404@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
We shouldn't dump this twice if we have two TCMs, and it really
doesn't belong to the TCM dump anyway, so move this out.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211210110539.b58a02f27512.Idbfbc430776a7abda0eb086215fb64f2c9307ac0@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
With more things being added, we're no longer going to duplicate
the error tables from the debug TLVs nor send them at runtime.
Use the debug TLVs to find the locations of the error tables. As
we've never released firmware using IWL_UCODE_TLV_TCM_DEBUG_ADDRS
just remove that entirely.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211210110539.779d68490f68.I472c7d9cbaca46000a10ec18808ef54836b33a8a@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
With the introduction of 6GHz channels the scan guard timeout should
be adjusted to account for the following extreme case:
- All 6GHz channels are scanned passively: 58 channels.
- The scan is fragmented with the following parameters: 3 fragments,
95 TUs suspend time, 44 TUs maximal out of channel time.
The above would result with scan time of more than 24 seconds. Thus,
set the timeout to 30 seconds.
Cc: stable@vger.kernel.org
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211210090244.3c851b93aef5.I346fa2e1d79220a6770496e773c6f87a2ad9e6c4@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|