| Age | Commit message (Collapse) | Author |
|---|
|
Currently the conntrack checks if the ending sequence of a packet
falls within the observed receive window. However it does so even
if it has not observe any packet from the remote yet and uses an
uninitialized receive window (td_maxwin).
If a connection uses Fast Open to send a SYN-data packet which is
dropped afterward in the network. The subsequent SYNs retransmits
will all fail this check and be discarded, leading to a connection
timeout. This is because the SYN retransmit does not contain data
payload so
end == initial sequence number (isn) + 1
sender->td_end == isn + syn_data_len
receiver->td_maxwin == 0
The fix is to only apply this check after td_maxwin is initialized.
Reported-by: Michael Chan <mcfchan@stanford.edu>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are 3 small fixes for staging/IIO drivers for 3.11-rc5. Nothing
huge, two IIO driver fixes, and a zcache fix. All of these have been
in linux-next for a while"
* tag 'staging-3.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: zcache: fix "zcache=" kernel parameter
iio: ti_am335x_adc: Fix wrong samples received on 1st read
iio:trigger: Fix use_count race condition
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are 3 small USB fixes for 3.11-rc5.
One is a fix that the ChromeOS developers ran into on some Intel
hardware, one is a build fix, and the last is a MAINTAINERS update to
help people figure out where to send USB network driver patches.
All of these have been in linux-next for a while"
* tag 'usb-3.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
MAINTAINERS: Add separate section for USB NETWORKING DRIVERS
usb: xhci: add missing dma-mapping.h includes
usb: core: don't try to reset_device() a port that got just disconnected
|
|
Fix inverted check when deleting an fdb entry.
Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The early bug checks are moot because the VMA layer ensures those things.
1. It will not call invalidatepage unless PagePrivate (or PagePrivate2) are set
2. It will not call invalidatepage without taking a PageLock first.
3. Guantrees that the inode page is mapped.
Signed-off-by: Milosz Tanski <milosz@adfin.com>
Reviewed-by: Sage Weil <sage@inktank.com>
|
|
All of the early exit paths need to drop the mutex; it is only the normal
path through the function that does not. Skip the unlock in that case
with a goto out_unlocked.
Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Jianpeng Ma <majianpeng@gmail.com>
|
|
Only for ceph_sync_write, the osd can return EOLDSNAPC.so move the
related codes after the call ceph_sync_write.
Signed-off-by: Jianpeng Ma <majianpeng@gmail.com>
Reviewed-by: Sage Weil <sage@inktank.com>
|
|
The local variables such as 'bio_list', and 'pages' are pointers;
thus, use NULL instead of 0 to fix the following sparse warnings.
drivers/block/rbd.c:2166:32: warning: Using plain integer as NULL pointer
drivers/block/rbd.c:2168:31: warning: Using plain integer as NULL pointer
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Reviewed-by: Sage Weil <sage@inktank.com>
|
|
remove_session_caps() uses iterate_session_caps() to remove caps,
but iterate_session_caps() skips inodes that are being deleted.
So session->s_nr_caps can be non-zero after iterate_session_caps()
return.
We can fix the issue by waiting until deletions are complete.
__wait_on_freeing_inode() is designed for the job, but it is not
exported, so we use lookup inode function to access it.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
|
|
dbf2576e37 ("workqueue: make all workqueues non-reentrant") made
WQ_NON_REENTRANT no-op and the flag is going away. Remove its usages.
This patch doesn't introduce any behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Sage Weil <sage@inktank.com>
Cc: ceph-devel@vger.kernel.org
|
|
Func ceph_calc_ceph_pg maybe failed.So add check for returned value.
Signed-off-by: Jianpeng Ma <majianpeng@gmail.com>
Reviewed-by: Sage Weil <sage@inktank.com>
Signed-off-by: Sage Weil <sage@inktank.com>
|
|
Sending reads and writes through the sync read/write paths bypasses the
page cache, which is not expected or generally a good idea. Removing
the write check is safe as there is a conditional vfs_fsync_range() later
in ceph_aio_write that already checks for the same flag (via
IS_SYNC(inode)).
Signed-off-by: Jianpeng Ma <majianpeng@gmail.com>
Reviewed-by: Sage Weil <sage@inktank.com>
|
|
We pass in a u64 value for "len" and then immediately truncate away the
upper 32 bits.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <alex.elder@linaro.org>
|
|
The MDS uses caps message to notify clients about deleted inode.
when receiving a such message, invalidate any alias of the inode.
This makes the kernel release the inode ASAP.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Sage Weil <sage@inktank.com>
|
|
To write data, the writer first acquires the i_mutex, then try getting
caps. The writer may sleep while holding the i_mutex. If the MDS revokes
Fb cap in this case, vmtruncate work can't do its job because i_mutex
is locked. We should wake up the writer and let it truncate the pages.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Sage Weil <sage@inktank.com>
|
|
To handle "link" request, the MDS need to xlock inode's linklock,
which requires revoking any CAP_LINK_SHARED.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Sage Weil <sage@inktank.com>
|
|
When register_session() is given an out-of-range argument for mds,
ceph_mdsmap_get_addr() will return a null pointer, which would be given to
ceph_con_open() & be dereferenced, causing a kernel oops. This fixes bug #4685
in the Ceph bug tracker <http://tracker.ceph.com/issues/4685>.
Signed-off-by: Nathaniel Yazdani <n1ght.4nd.d4y@gmail.com>
Reviewed-by: Sage Weil <sage@inktank.com>
|
|
For nofail == false request, if __map_request failed, the caller does
cleanup work, like releasing the relative pages. It doesn't make any sense
to retry this request.
CC: stable@vger.kernel.org
Signed-off-by: Jianpeng Ma <majianpeng@gmail.com>
Reviewed-by: Sage Weil <sage@inktank.com>
|
|
CC: stable@vger.kernel.org
Signed-off-by: Jianpeng Ma <majianpeng@gmail.com>
Reviewed-by: Sage Weil <sage@inktank.com>
|
|
When btrfs readdir() hits the last entry it sets the readdir offset to a
huge value to stop buggy apps from breaking when the same name is
returned by readdir() with concurrent rename()s.
But unconditionally setting the offset to INT_MAX causes readdir() to
loop returning any entries with offsets past INT_MAX. It only takes a
few hours of constant file creation and removal to create entries past
INT_MAX.
So let's set the huge offset to LLONG_MAX if the last entry has already
overflowed 32bit loff_t. Without large offsets behaviour is identical.
With large offsets 64bit apps will work and 32bit apps will be no more
broken than they currently are if they see large offsets.
Signed-off-by: Zach Brown <zab@redhat.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
|
|
A user reported a panic when running with autodefrag and deleting snapshots.
This is because we could end up trying to add the root to the dead roots list
twice. To fix this check to see if we are empty before adding ourselves to the
dead roots list. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
|
|
The ceph guys tripped over this bug where we were still holding onto the
original path that we used to copy the inode with when logging. This is based
on Chris's fix which was reported to fix the problem. We need to drop the paths
in two cases anyway so just move the drop up so that we don't have duplicate
code. Thanks,
Cc: stable@vger.kernel.org
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
|
|
I noticed while running multi-threaded fsync tests that sometimes fsck would
complain about an improper gap. This happens because we fail to add a hole
extent to the file, which was happening when we'd split a hole EM because
btrfs_drop_extent_cache was just discarding the whole em instead of splitting
it. So this patch fixes this by allowing us to split a hole em properly, which
means that added holes actually get logged properly and we no longer see this
fsck error. Thankfully we're tolerant of these sort of problems so a user would
not see any adverse effects of this bug, other than fsck complaining. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
|
|
Because we don't mess with the offset into the extent for compressed we will
properly find both extents for this case
[extent a][extent b][rest of extent a]
but because we already added a ref for the front half we won't add the inode
information for the second half. This causes us to leak that memory and not
print out the other offset when we do logical-resolve. So fix this by calling
ulist_add_merge and then add our eie to the existing entry if there is one.
With this patch we get both offsets out of logical-resolve. With this and the
other 2 patches I've sent we now pass btrfs/276 on my vm with compress-force=lzo
set. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
|
|
If you do btrfs inspect-internal logical-resolve on a compressed extent that has
been partly overwritten it won't find anything. This is because we try and
match the extent offset we've searched for based on the extent offset in the
data extent entry. However this doesn't work for compressed extents because the
offsets are for the uncompressed size, not the compressed size. So instead only
do this check if we are not compressed, that way we can get an actual entry for
the physical offset rather than nothing for compressed. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
|
|
xfstest btrfs/276 was freaking out on slower boxes partly because fiemap was
offsetting the physical based on the extent offset. This is perfectly fine with
uncompressed extents, however the extent offset is into the uncompressed area,
not the compressed. So we can return a physical value that isn't at all within
the area we have allocated on disk. Fix this by returning the start of the
extent if it is compressed no matter what the offset. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
|
|
commit 47fb091fb787420cd195e66f162737401cce023f(Btrfs: fix unlock after free on rewinded tree blocks)
takes an extra increment on the reference of allocated dummy extent buffer, so now we
cannot free this dummy one, and end up with extent buffer leak.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
|
|
For partial extents, snapshot-aware defrag does not work as expected,
since
a) we use the wrong logical offset to search for parents, which should be
disk_bytenr + extent_offset, not just disk_bytenr,
b) 'offset' returned by the backref walking just refers to key.offset, not
the 'offset' stored in btrfs_extent_data_ref which is
(key.offset - extent_offset).
The reproducer:
$ mkfs.btrfs sda
$ mount sda /mnt
$ btrfs sub create /mnt/sub
$ for i in `seq 5 -1 1`; do dd if=/dev/zero of=/mnt/sub/foo bs=5k count=1 seek=$i conv=notrunc oflag=sync; done
$ btrfs sub snap /mnt/sub /mnt/snap1
$ btrfs sub snap /mnt/sub /mnt/snap2
$ sync; btrfs filesystem defrag /mnt/sub/foo;
$ umount /mnt
$ btrfs-debug-tree sda (Here we can check whether the defrag operation is snapshot-awared.
This addresses the above two problems.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
|
|
Create a small file and fallocate it to a big size with
FALLOC_FL_KEEP_SIZE option, then truncate it back to the
small size again, the disk free space is not changed back
in this case. i.e,
total 4
-rw-r--r-- 1 root root 512 Jun 28 11:35 test
Filesystem Size Used Avail Use% Mounted on
....
/dev/sdb1 8.0G 56K 7.2G 1% /mnt
-rw-r--r-- 1 root root 512 Jun 28 11:35 /mnt/test
Filesystem Size Used Avail Use% Mounted on
....
/dev/sdb1 8.0G 5.1G 2.2G 70% /mnt
Filesystem Size Used Avail Use% Mounted on
....
/dev/sdb1 8.0G 5.1G 2.2G 70% /mnt
With this fix, the truncated up space is back as:
Filesystem Size Used Avail Use% Mounted on
....
/dev/sdb1 8.0G 56K 7.2G 1% /mnt
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
|
|
OpenFirmware wasn't quite following the protocol described in boot.txt
and the kernel has detected this through use of the sentinel value
in boot_params. OFW does zero out almost all of the stuff that it should
do, but not the sentinel.
This causes the kernel to clear olpc_ofw_header, which breaks x86 OLPC
support.
OpenFirmware has now been fixed. However, it would be nice if we could
maintain Linux compatibility with old firmware versions. To do that, we just
have to avoid zeroing out olpc_ofw_header.
OFW does not write to any other parts of the header that are being zapped
by the sentinel-detection code, and all users of olpc_ofw_header are
somewhat protected through checking for the OLPC_OFW_SIG magic value
before using it. So this should not cause any problems for anyone.
Signed-off-by: Daniel Drake <dsd@laptop.org>
Link: http://lkml.kernel.org/r/20130809221420.618E6FAB03@dev.laptop.org
Acked-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: <stable@vger.kernel.org> # v3.9+
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and power management fixes from Rafael Wysocki:
- ACPI-based memory hotplug stopped working after a recent change,
because it's not possible to associate sufficiently many "physical"
devices with one ACPI device object due to an artificial limit. Fix
from Rafael J Wysocki removes that limit and makes memory hotplug
work again.
- A change made in 3.9 uncovered a bug in the ACPI processor driver
preventing NUMA nodes from being put offline due to an ordering
issue. Fix from Yasuaki Ishimatsu changes the ordering to make
things work again.
- One of the recent ACPI video commits (that hasn't been reverted so
far) uncovered a bug in the code handling quirky BIOSes that caused
some Asus machines to boot with backlight completely off which made
it quite difficult to use them afterward. Fix from Felipe Contreras
improves the quirk to cover this particular case correctly.
- A cpufreq user space interface change made in 3.10 inadvertently
renamed the ignore_nice_load sysfs attribute to ignore_nice which
resulted in some confusion. Fix from Viresh Kumar changes the name
back to ignore_nice_load.
- An initialization ordering change made in 3.9 broke cpufreq on
loongson2 boards. Fix from Aaro Koskinen restores the correct
initialization ordering there.
- Fix breakage resulting from a mistake made in 3.9 and causing the
detection of some graphics adapters (that were detected correctly
before) to fail. There are two objects representing the same PCIe
port in the affected systems' ACPI tables and both appear as
"enabled" and we are expected to guess which one to use. We used to
choose the right one before by pure luck, but when we tried to
address another similar corner case, the luck went away. This time
we try to make our guessing a bit more educated which is reported to
work on those systems.
- The /proc/acpi/wakeup interface code is missing some locking which
may lead to breakage if that file is written or read during hotplug
of wakeup devices. That should be rare but still possible, so it's
better to start using the appropriate locking there.
* tag 'pm+acpi-3.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: Try harder to resolve _ADR collisions for bridges
cpufreq: rename ignore_nice as ignore_nice_load
cpufreq: loongson2: fix regression related to clock management
ACPI / processor: move try_offline_node() after acpi_unmap_lsapic()
ACPI: Drop physical_node_id_bitmap from struct acpi_device
ACPI / PM: Walk physical_node_list under physical_node_lock
ACPI / video: improve quirk check in acpi_video_bqc_quirk()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fix from Guenter Roeck:
"Fix bug in adt7470 driver which causes it to fail writing fan speed
limits"
* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (adt7470) Fix incorrect return code check
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
"Some driver fixes (em28xx, coda, usbtv, s5p, hdpvr and ml86v7667) and
a fix for media DocBook"
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
[media] em28xx: fix assignment of the eeprom data
[media] hdpvr: fix iteration over uninitialized lists in hdpvr_probe()
[media] usbtv: fix dependency
[media] usbtv: Throw corrupted frames away
[media] usbtv: Fix deinterlacing
[media] v4l2: added missing mutex.h include to v4l2-ctrls.h
[media] DocBook: upgrade media_api DocBook version to 4.2
[media] ml86v7667: fix compile warning: 'ret' set but not used
[media] s5p-g2d: Fix registration failure
[media] media: coda: Fix DT driver data pointer for i.MX27
[media] s5p-mfc: Fix input/output format reporting
|
|
This patch fixed the condition of extend_desc for jumbo frame.
There is no check routine for extend_desc in the stmmac_jumbo_frm function.
Even though extend_desc is set if dma_tx is used instead of dma_etx.
It causes kernel panic.
Signed-off-by: Byungho An <bh74.an@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
Pull HID fix from Jiri Kosina:
"Revert of a patch which breaks enumeration workaround in
hid-logitech-dj"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
Revert "HID: hid-logitech-dj: querying_devices was never set"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux
Pull fbdev fixes from Tomi Valkeinen:
- omapdss: compilation fix and DVI fix for PandaBoard
- mxsfb: fix colors when using 18bit LCD bus
* tag 'fbdev-fixes-3.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux:
ARM: OMAP: dss-common: fix Panda's DVI DDC channel
video: mxsfb: fix color settings for 18bit data bus and 32bpp
OMAPDSS: analog-tv-connector: compile fix
|
|
Pull drm fixes from Dave Airlie:
"Mostly radeon, more fixes for dynamic power management which is is off
by default for this release anyways, but there are a large number of
testers, so I'd like to keep merging the fixes.
Otherwise, radeon UVD fixes affecting suspend/resume regressions, i915
regression fixes, one for your mac mini, ast, mgag200, cirrus ttm fix
and one regression fix in the core"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (25 commits)
drm: Don't pass negative delta to ktime_sub_ns()
drm/radeon: make missing smc ucode non-fatal
drm/radeon/dpm: require rlc for dpm
drm/radeon/cik: use a mutex to properly lock srbm instanced registers
drm/radeon: remove unnecessary unpin
drm/radeon: add more UVD CS checking
drm/radeon: stop sending invalid UVD destroy msg
drm/radeon: only save UVD bo when we have open handles
drm/radeon: always program the MC on startup
drm/radeon: fix audio dto calculation on DCE3+ (v3)
drm/radeon/dpm: disable sclk ss on rv6xx
drm/radeon: fix halting UVD
drm/radeon/dpm: adjust power state properly for UVD on SI
drm/radeon/dpm: fix spread spectrum setup (v2)
drm/radeon/dpm: adjust thermal protection requirements
drm/radeon: select audio dto based on encoder id for DCE3
drm/radeon: properly handle pm on gpu reset
drm/i915: do not disable backlight on vgaswitcheroo switch off
drm/i915: Don't call encoder's get_config unless encoder is active
drm/i915: avoid brightness overflow when doing scale
...
|
|
This is a regression introduced by:
commit fe5c3561e6f0ac7c9546209f01351113c1b77ec8
Author: stephen hemminger <stephen@networkplumber.org>
Date: Sat Jul 13 10:18:18 2013 -0700
vxlan: add necessary locking on device removal
The problem is that vxlan_dellink(), which is called with RTNL lock
held, tries to flush the workqueue synchronously, but apparently
igmp_join and igmp_leave work need to hold RTNL lock too, therefore we
have a soft lockup!
As suggested by Stephen, probably the flush_workqueue can just be
removed and let the normal refcounting work. The workqueue has a
reference to device and socket, therefore the cleanups should work
correctly.
Suggested-by: Stephen Hemminger <stephen@networkplumber.org>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: David S. Miller <davem@davemloft.net>
Tested-by: Cong Wang <amwang@redhat.com>
Signed-off-by: Cong Wang <amwang@redhat.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is a regression introduced by:
commit 3fc2de2faba387218bdf9dbc6b13f513ac3b060a
Author: stephen hemminger <stephen@networkplumber.org>
Date: Thu Jul 18 08:40:15 2013 -0700
vxlan: fix igmp races
Before this commit, the old code was:
if (vxlan_group_used(vn, vxlan->default_dst.remote_ip))
ip_mc_join_group(sk, &mreq);
else
ip_mc_leave_group(sk, &mreq);
therefore we shoud check vxlan_group_used(), not its opposite,
for igmp_join.
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Cong Wang <amwang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Rename mib counter from "low latency" to "busy poll"
v1 also moved the counter to the ip MIB (suggested by Shawn Bohrer)
Eric Dumazet suggested that the current location is better.
So v2 just renames the counter to fit the new naming convention.
Signed-off-by: Eliezer Tamir <eliezer.tamir@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Introduced in cf3c4c03060b688cbc389ebc5065ebcce5653e96
("8139cp: Add dma_mapping_error checking")
Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Same behavior than 802.1q : finds the encapsulated protocol and
skip 32bit header.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix ipgre_header() (header_ops->create) to return the correct
amount of bytes pushed. Most callers of dev_hard_header() seem
to care only if it was success, but af_packet.c uses it as
offset to the skb to copy from userspace only once. In practice
this fixes packet socket sendto()/sendmsg() to gre tunnels.
Regression introduced in c54419321455631079c7d6e60bc732dd0c5914c5
("GRE: Refactor GRE tunneling code.")
Cc: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We want the data stored in "addr" and "qual", but the extra ampersands
mean we are copying stack data instead.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
Patch fixes zd1201 not to use stack as URB transfer_buffer. URB buffers need
to be DMA-able, which stack is not.
Patch is only compile tested.
Cc: stable@vger.kernel.org
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes
|
|
device_close()->recalc_sigpending() is not needed, sigprocmask() takes
care of TIF_SIGPENDING correctly.
And without ->siglock it is racy and wrong, it can wrongly clear
TIF_SIGPENDING and miss a signal.
But even with this patch device_close() is still buggy:
1. sigprocmask() should not be used, we have set_task_blocked(),
but this is minor.
2. We should never block SIGKILL or SIGSTOP, and this is what
the code tries to do.
3. This can't protect against SIGKILL or SIGSTOP anyway. Another
thread can do signal_wake_up(), say, do_signal_stop() or
complete_signal() or debugger.
4. sigprocmask(SIG_BLOCK, allsigs) doesn't necessarily clears
TIF_SIGPENDING, say, freezing() or ->jobctl.
5. device_write() looks equally wrong by the same reason.
Looks like, this tries to protect some wait_event_interruptible() logic
from signals, it should be turned into uninterruptible wait. Or we need
to implement something like signals_stop/start for such a use-case.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The ACTIVITY and ERROR signals were reversed in the original commit.
Fix that so that hard drive activity does not show up on the error
light, and attempts to indicate that the hard drive is failing do
not show up as hard drive activity. This fixes a fairly serious
functional bug in the driver, but failing to apply this patch will
not cause any stability issues on the system.
Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
|
|
'target' will be set to '-1' in kvm_arch_vcpu_init(), and it need check
'target' whether less than zero or not in kvm_vcpu_initialized().
So need define target as 'int' instead of 'u32', just like ARM has done.
The related warning:
arch/arm64/kvm/../../../arch/arm/kvm/arm.c:497:2: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits]
Signed-off-by: Chen Gang <gang.chen@asianux.com>
[Marc: reformated the Subject line to fit the series]
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
When performing a Stage-2 TLB invalidation, it is necessary to
make sure the write to the page tables is observable by all CPUs.
For this purpose, add dsb instructions to __kvm_tlb_flush_vmid_ipa
and __kvm_flush_vm_context before doing the TLB invalidation itself.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
