summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-12-20bnxt_en: Adjust default RX coalescing ticks to 10 us.Michael Chan
For a little better performance on faster machines and faster link speeds. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-20bnxt_en: Support for 64-bit flow handle.Venkat Duvvuru
Older firmware only supports 16-bit flow handle, because of which the number of flows that can be offloaded can’t scale beyond a point. Newer firmware supports 64-bit flow handle enabling the host to scale upto millions of flows. With the new 64-bit flow handle support, driver has to query flow stats in a different way compared to the older approach. This patch adds support for 64-bit flow handle and new way to query flow stats. Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com> Reviewed-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-20bnxt_en: Increase context memory allocations on 57500 chips for RDMA.Michael Chan
If RDMA is supported on the 57500 chip, increase context memory allocations for the resources used by RDMA. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-20bnxt_en: Add Level 2 context memory paging support.Michael Chan
Add the new functions bnxt_alloc_ctx_pg_tbls()/bnxt_free_ctx_pg_tbls() to allocate and free pages for context memory. The new functions will handle the different levels of paging support and allocate/free the pages accordingly using the existing functions. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-20bnxt_en: Enhance bnxt_alloc_ring()/bnxt_free_ring().Michael Chan
To support level 2 context page memory structures, enhance the bnxt_ring_mem_info structure with a "depth" field to specify the page level and add a flag to specify using full pages for L1 and L2 page tables. This is needed to support RDMA functionality on 57500 chips since RDMA requires more context memory. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-20bnxt_en: Add support for 2nd firmware message channel.Venkat Duvvuru
Earlier, some of the firmware commands (ex: CFA_FLOW_*) which are processed by KONG processor were sent to the CHIMP processor from the host. This approach was taken as there was no direct message channel to KONG. CHIMP in turn used to send them to KONG. Newer firmware supports a new message channel which the host can send messages directly to the KONG processor. This patch adds support for required changes needed in the driver to support direct KONG message channel. This speeds up flow related messages sent to the firmware for CLS_FLOWER offload. Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-20bnxt_en: Introduce bnxt_get_hwrm_resp_addr & bnxt_get_hwrm_seq_id routines.Venkat Duvvuru
These routines will be enhanced in the subsequent patch to return the 2nd firmware comm. channel's hwrm response address & sequence id respectively. Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-20bnxt_en: Avoid arithmetic on void * pointer.Venkat Duvvuru
Typecast hwrm_cmd_resp_addr to (u8 *) from (void *) before doing arithmetic. Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-20bnxt_en: Use macros for firmware message doorbell offsets.Venkat Duvvuru
In preparation for adding a 2nd communication channel to firmware. Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-20bnxt_en: Set hwrm_intr_seq_id value to its inverted value.Venkat Duvvuru
Set hwrm_intr_seq_id value to its inverted value instead of HWRM_SEQ_INVALID, when an hwrm completion of type CMPL_BASE_TYPE_HWRM_DONE is received. This will enable us to use the complete 16-bit sequence ID space. Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-20bnxt_en: Update firmware interface spec. to 1.10.0.33.Michael Chan
The major changes are in the flow offload firmware APIs. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-20Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2018-12-20 Two last patches for this release cycle: 1) Remove an unused variable in xfrm_policy_lookup_bytype(). From YueHaibing. 2) Fix possible infinite loop in __xfrm6_tunnel_alloc_spi(). Also from YueHaibing. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-20Merge remote-tracking branches 'spi/topic/mem' and 'spi/topic/mtd' into spi-nextMark Brown
2018-12-20Merge branch 'spi-4.21' into spi-nextMark Brown
2018-12-20Merge branch 'spi-4.20' into spi-linusMark Brown
2018-12-20Merge tag 'm68k-for-v4.20-tag2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull m68k fix from Geert Uytterhoeven: "Fix memblock-related crashes" * tag 'm68k-for-v4.20-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: Fix memblock-related crashes
2018-12-20Merge tag 'kbuild-fixes-v4.20-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fix from Masahiro Yamada: "Fix false positive warning/error about missing library for objtool" * tag 'kbuild-fixes-v4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: fix false positive warning/error about missing libelf
2018-12-20Merge tag 'char-misc-4.20-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are three tiny last-minute driver fixes for 4.20-rc8 that resolve some reported issues, and one MAINTAINERS file update. All of them are related to the hyper-v subsystem, it seems people are actually testing and using it now, which is nice to see :) The fixes are: - uio_hv_generic: fix for opening multiple times - Remove PCI dependancy on hyperv drivers - return proper error code for an unopened channel. And Sasha has signed up to help out with the hyperv maintainership. All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-4.20-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: Drivers: hv: vmbus: Return -EINVAL for the sys files for unopened channels x86, hyperv: remove PCI dependency MAINTAINERS: Patch monkey for the Hyper-V code uio_hv_generic: set callbacks on open
2018-12-20Merge tag 'tty-4.20-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fix from Greg KH: "Here is a single fix, a revert, for the 8250 serial driver to resolve a reported problem. There was some attempted patches to fix the issue, but people are arguing about them, so reverting the patch to revert back to the 4.19 and older behavior is the best thing to do at this late in the release cycle. The revert has been in linux-next with no reported issues" * tag 'tty-4.20-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: Revert "serial: 8250: Fix clearing FIFOs in RS485 mode again"
2018-12-20Merge tag 'usb-4.20-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes and ids from Greg KH: "Here are some late xhci fixes for 4.20-rc8 as well as a few new device ids for the option usb-serial driver. The xhci fixes resolve some many-reported issues and all of these have been in linux-next for a while with no reported problems" * tag 'usb-4.20-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: xhci: fix 'broken_suspend' placement in struct xchi_hcd xhci: Don't prevent USB2 bus suspend in state check intended for USB3 only USB: serial: option: add Telit LN940 series USB: serial: option: add Fibocom NL668 series USB: serial: option: add Simcom SIM7500/SIM7600 (MBIM mode) USB: serial: option: add GosunCn ZTE WeLink ME3630 USB: serial: option: add HP lt4132
2018-12-20Merge tag 'mmc-v4.20-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: "MMC core: - Restore code to allow BKOPS and CACHE ctrl even if no HPI support - Reset HPI enabled state during re-init - Use a default minimum timeout when enabling CACHE ctrl MMC host: - omap_hsmmc: Fix DMA API warning - sdhci-tegra: Fix dt parsing of SDMMC pads autocal values - Correct register accesses when enabling v4 mode" * tag 'mmc-v4.20-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: core: Use a minimum 1600ms timeout when enabling CACHE ctrl mmc: core: Allow BKOPS and CACHE ctrl even if no HPI support mmc: core: Reset HPI enabled state during re-init and in case of errors mmc: omap_hsmmc: fix DMA API warning mmc: tegra: Fix for SDMMC pads autocal parsing from dt mmc: sdhci: Fix sdhci_do_enable_v4_mode
2018-12-20iomap: Revert "fs/iomap.c: get/put the page in iomap_page_create/release()"Dave Chinner
This reverts commit 61c6de667263184125d5ca75e894fcad632b0dd3. The reverted commit added page reference counting to iomap page structures that are used to track block size < page size state. This was supposed to align the code with page migration page accounting assumptions, but what it has done instead is break XFS filesystems. Every fstests run I've done on sub-page block size XFS filesystems has since picking up this commit 2 days ago has failed with bad page state errors such as: # ./run_check.sh "-m rmapbt=1,reflink=1 -i sparse=1 -b size=1k" "generic/038" .... SECTION -- xfs FSTYP -- xfs (debug) PLATFORM -- Linux/x86_64 test1 4.20.0-rc6-dgc+ MKFS_OPTIONS -- -f -m rmapbt=1,reflink=1 -i sparse=1 -b size=1k /dev/sdc MOUNT_OPTIONS -- /dev/sdc /mnt/scratch generic/038 454s ... run fstests generic/038 at 2018-12-20 18:43:05 XFS (sdc): Unmounting Filesystem XFS (sdc): Mounting V5 Filesystem XFS (sdc): Ending clean mount BUG: Bad page state in process kswapd0 pfn:3a7fa page:ffffea0000ccbeb0 count:0 mapcount:0 mapping:ffff88800d9b6360 index:0x1 flags: 0xfffffc0000000() raw: 000fffffc0000000 dead000000000100 dead000000000200 ffff88800d9b6360 raw: 0000000000000001 0000000000000000 00000000ffffffff page dumped because: non-NULL mapping CPU: 0 PID: 676 Comm: kswapd0 Not tainted 4.20.0-rc6-dgc+ #915 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.1-1 04/01/2014 Call Trace: dump_stack+0x67/0x90 bad_page.cold.116+0x8a/0xbd free_pcppages_bulk+0x4bf/0x6a0 free_unref_page_list+0x10f/0x1f0 shrink_page_list+0x49d/0xf50 shrink_inactive_list+0x19d/0x3b0 shrink_node_memcg.constprop.77+0x398/0x690 ? shrink_slab.constprop.81+0x278/0x3f0 shrink_node+0x7a/0x2f0 kswapd+0x34b/0x6d0 ? node_reclaim+0x240/0x240 kthread+0x11f/0x140 ? __kthread_bind_mask+0x60/0x60 ret_from_fork+0x24/0x30 Disabling lock debugging due to kernel taint .... The failures are from anyway that frees pages and empties the per-cpu page magazines, so it's not a predictable failure or an easy to debug failure. generic/038 is a reliable reproducer of this problem - it has a 9 in 10 failure rate on one of my test machines. Failure on other machines have been at random points in fstests runs but every run has ended up tripping this problem. Hence generic/038 was used to bisect the failure because it was the most reliable failure. It is too close to the 4.20 release (not to mention holidays) to try to diagnose, fix and test the underlying cause of the problem, so reverting the commit is the only option we have right now. The revert has been tested against a current tot 4.20-rc7+ kernel across multiple machines running sub-page block size XFs filesystems and none of the bad page state failures have been seen. Signed-off-by: Dave Chinner <dchinner@redhat.com> Cc: Piotr Jaroszynski <pjaroszynski@nvidia.com> Cc: Christoph Hellwig <hch@lst.de> Cc: William Kucharski <william.kucharski@oracle.com> Cc: Darrick J. Wong <darrick.wong@oracle.com> Cc: Brian Foster <bfoster@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-20spi: sh-msiof: Reduce the number of times write to and perform the ↵Hoan Nguyen An
transmission from FIFO The current state of the spi-sh-msiof, in master transfer mode: if t-> bits_per_word <= 8, if the data length is divisible by 4 ((len & 3) = 0), the length of each word will be 32 bits In case of data length can not be divisible by 4 ((len & 3) != 0), always set each word to be 8 bits, this will increase the number of times that write to FIFO, increasing the number of times it should be transmitted. Assume that the number of bytes of data length more than 64 bytes, each transmission will write 64 times into the TFDR then transmit, a maximum one-time transmission will transmit 64 bytes if each word is 8 bits long. Switch to setting if t->bits_per_word <= 8, the word length will be 32 bits although the data length is not divisible by 4, then if leftover, will transmit the balance and the length of each words is 1 byte. The maximum each can transmit up to 64 x 4 (Data Size = 32 bits (4 bytes)) = 256 bytes. TMDR2 : Bits 28 to 24 BITLEN1[4:0] Data Size (8 to 32 bits) Bits 23 to 16 WDLEN1[7:0] Word Count (1 to 64 words) Signed-off-by: Hoan Nguyen An <na-hoan@jinso.co.jp> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-12-20regulator: convert to DEFINE_SHOW_ATTRIBUTEYangtao Li
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-12-20regulator: mcp16502: Fix missing n_voltages settingAxel Lin
The n_voltages setting is not set, fix it. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-12-20regulator: mcp16502: Use #ifdef CONFIG_PM_SLEEP around ↵Axel Lin
mcp16502_suspend/resume_noirq mcp16502_suspend/resume_noirq is only used by SET_NOIRQ_SYSTEM_SLEEP_PM_OPS when CONFIG_PM_SLEEP is defined. So use #ifdef CONFIG_PM_SLEEP instead CONFIG_SUSPEND guard. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-12-20Merge tag 'kvm-ppc-next-4.21-1' of ↵Radim Krčmář
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc PPC KVM update for 4.21 from Paul Mackerras The main new feature this time is support in HV nested KVM for passing a device that is emulated by a level 0 hypervisor and presented to level 1 as a PCI device through to a level 2 guest using VFIO. Apart from that there are improvements for migration of radix guests under HV KVM and some other fixes and cleanups.
2018-12-20net/mlx5: Fix LAG requirement when CONFIG_MLX5_ESWITCH is offAviv Heller
If CONFIG_MLX5_ESWITCH is not defined, test for SR-IOV being disabled, instead of calling e-switch LAG prereq routine. Since LAG with SRIOV is allowed only when switchdev mode is on. Fixes: eff849b2c669 ("net/mlx5: Allow/disallow LAG according to pre-req only") Signed-off-by: Aviv Heller <avivh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-20net/mlx5: Fix query_nic_sys_image_guid() error during initAviv Heller
vport system image guid should be queried using vport nic API for Ethernet ports, and vport hca API for Infiniband ports. Fixes: fadd59fc50d0 ("net/mlx5: Introduce inter-device communication mechanism") Signed-off-by: Aviv Heller <avivh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-20net/mlx5e: Support tunnel encap over tagged EthernetEli Britstein
Generate encap header depending on the routed device to support native/tagged Ethernet header. Signed-off-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-20net/mlx5e: Support VLAN encap ETH header generationEli Britstein
Support generation of native or tagged Ethernet header for encap header, depending on provided net device. Signed-off-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-20net/mlx5e: Re-order route and encap header memory allocationEli Britstein
Change the order to first route IPv4/6 and return if error. Only after successful route continue to allocate an encap header, with no functional change. Signed-off-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-20net/mlx5e: Tunnel encap ETH header helper functionEli Britstein
In tunnel encap we prepare the encap header for IPv4/6 cases, in two separate functions. For ETH header generation the code is almost duplicated. Move the ETH header generation code from IPv4/6 functions to a helper function, with no functional change. Signed-off-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-20net/mlx5e: Fail attempt to offload e-switch TC encap flows with vlan on underlayEli Britstein
Currently we don't support nor fail attempts to offload encap flows routed to vlan device on the underlay network. We wrongly consider a vlan underlay device to be on the same e-switch b/c the switchdev ID is retrieved recursively. Add explicit check for that and fail such attempts. Also align to a more strict check for the ingress and the underlay devices to practically be on the same eswitch. Fixes: ce99f6b97fcd ('net/mlx5e: Support SRIOV TC encapsulation offloads for IPv6 tunnels') Fixes: 3e621b19b0bb ('net/mlx5e: Support TC encapsulation offloads with upper devices') Signed-off-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-20net/mlx5e: Tunnel routing output devs helper functionEli Britstein
For tunnel we determine the output devs for IPv4/6 cases, in two separate functions, with a duplicated code. Move that code from IPv4/6 functions to a helper function, with no functional change. Signed-off-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-20net/mlx5e: Fail attempt to offload e-switch TC flows with egress upper devicesEli Britstein
We use the switchdev parent HW id helper to identify if the mirred device shares the same ASIC/port with the ingress device. This can get us wrong in the presence of upper devices such as vlan or bridge set over the HW devices (VF or uplink representors), b/c the switchdev ID is retrieved recursively. To fail offload attempts in such cases, we condition the check on the egress device to have not only the same switchdev ID but also the relevant mlx5 netdev ops. Fixes: 03a9d11e6eeb ('net/mlx5e: Add TC drop and mirred/redirect action parsing for SRIOV offloads') Signed-off-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Acked-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-20net/mlx5e: Allow vlans on e-switch uplink repsOr Gerlitz
There are cases (e.g tunneling with vlan on underlay and potentially more) where this makes sense, so allow that. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-20net/mlx5e: Increase VF representors' SQ size to 128Gavi Teitz
The default size for the VF representors' SQ was too small to handle high packet rates. Doubling the size from 64 to 128 drastically improves the packet rate under stress (by about 50%), whereas increasing the size beyond 128 has not shown to make any further difference. The impact of the SQ size was measured with UDP traffic, in the following topology: TG <-> PF <-> TC forwarding <-> VF representor <-> VF in VM over a single core processing bi-directional traffic, with the following results: SQ size of 64: SQ size of 128: Packet rate for 64B UDP packets: 860 [Kpps] 1280 [Kpps] Packet rate for 114B VxLan encapsulated UDP packets: 320 [Kpps] 500 [Kpps] Signed-off-by: Gavi Teitz <gavi@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-20mlx5: extend PTP gettime function to read system clockMiroslav Lichvar
Read the system time right before and immediately after reading the low register of the internal timer. This adds support for the PTP_SYS_OFFSET_EXTENDED ioctl. Cc: Richard Cochran <richardcochran@gmail.com> Cc: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-20mlx5: update timecounter at least twice per counter overflowMiroslav Lichvar
The timecounter needs to be updated at least once in half of the cyclecounter interval to prevent timecounter_cyc2time() interpreting a new timestamp as an old value and causing a backward jump. This would be an issue if the timecounter multiplier was so small that the update interval would not be limited by the 64-bit overflow in multiplication. Shorten the calculated interval to make sure the timecounter is updated in time even when the system clock is slowed down by up to 10%, the multiplier is increased by up to 10%, and the scheduled overflow check is late by 15%. Cc: Richard Cochran <richardcochran@gmail.com> Cc: Ariel Levkovich <lariel@mellanox.com> Cc: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-20powerpc/eeh: Fix debugfs_simple_attr.cocci warningsYueHaibing
Use DEFINE_DEBUGFS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTRIBUTE for debugfs files. Semantic patch information: Rationale: DEFINE_SIMPLE_ATTRIBUTE + debugfs_create_file() imposes some significant overhead as compared to DEFINE_DEBUGFS_ATTRIBUTE + debugfs_create_file_unsafe(). Generated by: scripts/coccinelle/api/debugfs/debugfs_simple_attr.cocci Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Russell Currey <ruscur@russell.cc> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-12-20powerpc/powernv/eeh/npu: Fix uninitialized variables in ↵Alexey Kardashevskiy
opal_pci_eeh_freeze_status The current implementation of the OPAL_PCI_EEH_FREEZE_STATUS call in skiboot's NPU driver does not touch the pci_error_type parameter so it might have garbage but the powernv code analyzes it nevertheless. This initializes pcierr and fstate to zero in all call sites. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Sam Bobroff <sbobroff@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-12-20powerpc/fsl: Add FSL_PPC_BOOK3E as supported arch for nospectre_v2 boot argDiana Craciun
Signed-off-by: Diana Craciun <diana.craciun@nxp.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-12-20powerpc/powernv/ioda: Reduce a number of hooks in pnv_phbAlexey Kardashevskiy
fixup_phb() is never used, this removes it. pick_m64_pe() and reserve_m64_pe() are always defined for all powernv PHBs: they are initialized by pnv_ioda_parse_m64_window() which is called unconditionally from pnv_pci_init_ioda_phb() which initializes all known PHB types on powernv so we can open code them. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-12-20powerpc/fsl: Update Spectre v2 reportingDiana Craciun
Report branch predictor state flush as a mitigation for Spectre variant 2. Signed-off-by: Diana Craciun <diana.craciun@nxp.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-12-20powerpc/powernv/ioda1: Remove dead code for a single device PEAlexey Kardashevskiy
At the moment PNV_IODA_PE_DEV is only used for NPU PEs which are not present on IODA1 machines (i.e. POWER7) so let's remove a piece of dead code. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Sam Bobroff <sbobroff@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-12-20powerpc/fsl: Enable runtime patching if nospectre_v2 boot arg is usedDiana Craciun
If the user choses not to use the mitigations, replace the code sequence with nops. Signed-off-by: Diana Craciun <diana.craciun@nxp.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-12-20vfio/spapr_tce: Get rid of possible infinite loopAlexey Kardashevskiy
As a part of cleanup, the SPAPR TCE IOMMU subdriver releases preregistered memory. If there is a bug in memory release, the loop in tce_iommu_release() becomes infinite; this actually happened to me. This makes the loop finite and prints a warning on every failure to make the code more bug prone. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-12-20powerpc/fsl: Flush branch predictor when entering KVMDiana Craciun
Switching from the guest to host is another place where the speculative accesses can be exploited. Flush the branch predictor when entering KVM. Signed-off-by: Diana Craciun <diana.craciun@nxp.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-12-20powerpc/powernv/npu: Remove unused headers and a macro.Alexey Kardashevskiy
The macro and few headers are not used so remove them. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Acked-by: Alistair Popple <alistair@popple.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
generated by cgit (git 2.34.1) at 2025-09-13 07:49:58 +0000