summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-04-06parisc: Remove duplicate struct task_struct declarationWan Jiabing
struct task_struct is declared twice. One has been declared at 154th line. Remove the duplicate. Signed-off-by: Wan Jiabing <wanjiabing@vivo.com> Signed-off-by: Helge Deller <deller@gmx.de>
2021-04-05scsi: scsi_transport_srp: Don't block target in SRP_PORT_LOST stateMartin Wilck
rport_dev_loss_timedout() sets the rport state to SRP_PORT_LOST and the SCSI target state to SDEV_TRANSPORT_OFFLINE. If this races with srp_reconnect_work(), a warning is printed: Mar 27 18:48:07 ictm1604s01h4 kernel: dev_loss_tmo expired for SRP port-18:1 / host18. Mar 27 18:48:07 ictm1604s01h4 kernel: ------------[ cut here ]------------ Mar 27 18:48:07 ictm1604s01h4 kernel: scsi_internal_device_block(18:0:0:100) failed: ret = -22 Mar 27 18:48:07 ictm1604s01h4 kernel: Call Trace: Mar 27 18:48:07 ictm1604s01h4 kernel: ? scsi_target_unblock+0x50/0x50 [scsi_mod] Mar 27 18:48:07 ictm1604s01h4 kernel: starget_for_each_device+0x80/0xb0 [scsi_mod] Mar 27 18:48:07 ictm1604s01h4 kernel: target_block+0x24/0x30 [scsi_mod] Mar 27 18:48:07 ictm1604s01h4 kernel: device_for_each_child+0x57/0x90 Mar 27 18:48:07 ictm1604s01h4 kernel: srp_reconnect_rport+0xe4/0x230 [scsi_transport_srp] Mar 27 18:48:07 ictm1604s01h4 kernel: srp_reconnect_work+0x40/0xc0 [scsi_transport_srp] Avoid this by not trying to block targets for rports in SRP_PORT_LOST state. Link: https://lore.kernel.org/r/20210401091105.8046-1-mwilck@suse.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin Wilck <mwilck@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05scsi: target: iscsi: Fix zero tag inside a trace eventRoman Bolshakov
target_sequencer_start event is triggered inside target_cmd_init_cdb(). se_cmd.tag is not initialized with ITT at the moment so the event always prints zero tag. Link: https://lore.kernel.org/r/20210403215415.95077-1-r.bolshakov@yadro.com Cc: stable@vger.kernel.org # 5.10+ Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05scsi: pm80xx: Fix chip initialization failureViswas G
Inbound and outbound queues were not properly configured and that lead to MPI configuration failure. Fixes: 05c6c029a44d ("scsi: pm80xx: Increase number of supported queues") Cc: stable@vger.kernel.org # 5.10+ Link: https://lore.kernel.org/r/20210402054212.17834-1-Viswas.G@microchip.com.com Reported-and-tested-by: Ash Izat <ash@ai0.uk> Signed-off-by: Viswas G <Viswas.G@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05batman-adv: initialize "struct batadv_tvlv_tt_vlan_data"->reserved fieldTetsuo Handa
KMSAN found uninitialized value at batadv_tt_prepare_tvlv_local_data() [1], for commit ced72933a5e8ab52 ("batman-adv: use CRC32C instead of CRC16 in TT code") inserted 'reserved' field into "struct batadv_tvlv_tt_data" and commit 7ea7b4a142758dea ("batman-adv: make the TT CRC logic VLAN specific") moved that field to "struct batadv_tvlv_tt_vlan_data" but left that field uninitialized. [1] https://syzkaller.appspot.com/bug?id=07f3e6dba96f0eb3cabab986adcd8a58b9bdbe9d Reported-by: syzbot <syzbot+50ee810676e6a089487b@syzkaller.appspotmail.com> Tested-by: syzbot <syzbot+50ee810676e6a089487b@syzkaller.appspotmail.com> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Fixes: ced72933a5e8ab52 ("batman-adv: use CRC32C instead of CRC16 in TT code") Fixes: 7ea7b4a142758dea ("batman-adv: make the TT CRC logic VLAN specific") Acked-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-05Merge branch 'hns3-fixes'David S. Miller
Salil Mehta says: ==================== Misc. fixes for hns3 driver Fixes for the miscellaneous problems found during the review of the code. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-05net: hns3: Remove un-necessary 'else-if' in the hclge_reset_event()Salil Mehta
Code to defer the reset(which caps the frequency of the reset) schedules the timer and returns. Hence, following 'else-if' looks un-necessary. Fixes: 9de0b86f6444 ("net: hns3: Prevent to request reset frequently") Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-05net: hns3: Remove the left over redundant check & assignmentSalil Mehta
This removes the left over check and assignment which is no longer used anywhere in the function and should have been removed as part of the below mentioned patch. Fixes: 012fcb52f67c ("net: hns3: activate reset timer when calling reset_event") Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-05i2c: designware: Adjust bus_freq_hz when refuse high speed mode setAndy Shevchenko
When hardware doesn't support High Speed Mode, we forget bus_freq_hz timing adjustment. This makes the timings and real registers being unsynchronized. Adjust bus_freq_hz when refuse high speed mode set. Fixes: b6e67145f149 ("i2c: designware: Enable high speed mode") Reported-by: "Song Bao Hua (Barry Song)" <song.bao.hua@hisilicon.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Barry Song <song.bao.hua@hisilicon.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-04-05net-ipv6: bugfix - raw & sctp - switch to ipv6_can_nonlocal_bind()Maciej Żenczykowski
Found by virtue of ipv6 raw sockets not honouring the per-socket IP{,V6}_FREEBIND setting. Based on hits found via: git grep '[.]ip_nonlocal_bind' We fix both raw ipv6 sockets to honour IP{,V6}_FREEBIND and IP{,V6}_TRANSPARENT, and we fix sctp sockets to honour IP{,V6}_TRANSPARENT (they already honoured FREEBIND), and not just the ipv6 'ip_nonlocal_bind' sysctl. The helper is defined as: static inline bool ipv6_can_nonlocal_bind(struct net *net, struct inet_sock *inet) { return net->ipv6.sysctl.ip_nonlocal_bind || inet->freebind || inet->transparent; } so this change only widens the accepted opt-outs and is thus a clean bugfix. I'm not entirely sure what 'fixes' tag to add, since this is AFAICT an ancient bug, but IMHO this should be applied to stable kernels as far back as possible. As such I'm adding a 'fixes' tag with the commit that originally added the helper, which happened in 4.19. Backporting to older LTS kernels (at least 4.9 and 4.14) would presumably require open-coding it or backporting the helper as well. Other possibly relevant commits: v4.18-rc6-1502-g83ba4645152d net: add helpers checking if socket can be bound to nonlocal address v4.18-rc6-1431-gd0c1f01138c4 net/ipv6: allow any source address for sendmsg pktinfo with ip_nonlocal_bind v4.14-rc5-271-gb71d21c274ef sctp: full support for ipv6 ip_nonlocal_bind & IP_FREEBIND v4.7-rc7-1883-g9b9742022888 sctp: support ipv6 nonlocal bind v4.1-12247-g35a256fee52c ipv6: Nonlocal bind Cc: Lorenzo Colitti <lorenzo@google.com> Fixes: 83ba4645152d ("net: add helpers checking if socket can be bound to nonlocal address") Signed-off-by: Maciej Żenczykowski <maze@google.com> Reviewed-By: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-05openvswitch: fix send of uninitialized stack memory in ct limit replyIlya Maximets
'struct ovs_zone_limit' has more members than initialized in ovs_ct_limit_get_default_limit(). The rest of the memory is a random kernel stack content that ends up being sent to userspace. Fix that by using designated initializer that will clear all non-specified fields. Fixes: 11efd5cb04a1 ("openvswitch: Support conntrack zone limit") Signed-off-by: Ilya Maximets <i.maximets@ovn.org> Acked-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-05Merge branch 'for-5.12-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq Pull workqueue fixes from Tejun Heo: "Two workqueue fixes. One is around debugobj and poses no risk. The other is to prevent the stall watchdog from firing spuriously in certain conditions. Not as trivial as debugobj change but is still fairly low risk" * 'for-5.12-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue/watchdog: Make unbound workqueues aware of touch_softlockup_watchdog() 84;0;0c84;0;0c There are two workqueue-specific watchdog timestamps: workqueue: Move the position of debug_work_activate() in __queue_work()
2021-04-05perf inject: Fix repipe usageAdrian Hunter
Since commit 14d3d54052539a1e ("perf session: Try to read pipe data from file") 'perf inject' has started printing "PERFILE2h" when not processing pipes. The commit exposed perf to the possiblity that the input is not a pipe but the 'repipe' parameter gets used. That causes the printing because perf inject sets 'repipe' to true always. The 'repipe' parameter of perf_session__new() is used by 2 functions: - perf_file_header__read_pipe() - trace_report() In both cases, the functions copy data to STDOUT_FILENO when 'repipe' is true. Fix by setting 'repipe' to true only if the output is a pipe. Fixes: e558a5bd8b74aff4 ("perf inject: Work with files") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Andrew Vagin <avagin@openvz.org> Link: http://lore.kernel.org/lkml/20210401103605.9000-1-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-04-05media: ipu3-cio2: Switch to use SOFTWARE_NODE_REFERENCE()Andy Shevchenko
This is useful to assign software node reference with arguments in a common way. Switch to use SOFTWARE_NODE_REFERENCE() here. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210329151207.36619-6-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-05software node: Introduce SOFTWARE_NODE_REFERENCE() helper macroAndy Shevchenko
This is useful to assign software node reference with arguments in a common way. Moreover, we have already couple of users that may be converted. And by the fact, one of them is moved right here to use the helper. Tested-by: Daniel Scally <djrscally@gmail.com> Reviewed-by: Daniel Scally <djrscally@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210329151207.36619-5-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-05software node: Imply kobj_to_swnode() to be no-opAndy Shevchenko
Since we don't use structure field layout randomization the manual shuffling can affect some macros, in particular kobj_to_swnode(), which becomes a no-op when kobj member is the first one in the struct swnode. Bloat-o-meter statistics for swnode.o: add/remove: 0/0 grow/shrink: 2/10 up/down: 9/-100 (-91) Total: Before=7217, After=7126, chg -1.26% Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210329151207.36619-4-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-05software node: Deduplicate code in fwnode_create_software_node()Andy Shevchenko
Deduplicate conditional and assignment in fwnode_create_software_node(), i.e. parent is checked in two out of three cases and parent software node is assigned by to_swnode() call. Reviewed-by: Daniel Scally <djrscally@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210329151207.36619-3-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-05software node: Introduce software_node_alloc()/software_node_free()Andy Shevchenko
Introduce software_node_alloc() and software_node_free() helpers. This will help with code readability and maintenance. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210329151207.36619-2-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-05software node: Free resources explicitly when swnode_register() failsAndy Shevchenko
Currently we have a slightly twisted logic in swnode_register(). It frees resources that it doesn't allocate on error path and in once case it relies on the ->release() implementation. Untwist the logic by freeing resources explicitly when swnode_register() fails. Currently it happens only in fwnode_create_software_node(). Tested-by: Daniel Scally <djrscally@gmail.com> Reviewed-by: Daniel Scally <djrscally@gmail.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210329151207.36619-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-05debugfs: drop pointless nul-termination in debugfs_read_file_bool()Rasmus Villemoes
simple_read_from_buffer() doesn't care about any bytes in the buffer beyond "available". Making the buffer nul-terminated is therefore completely pointless. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Link: https://lore.kernel.org/r/20210326151411.732220-1-linux@rasmusvillemoes.dk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-05driver core: add helper for deferred probe reason settingAhmad Fatoum
We now have three places within the same file doing the same operation of freeing this pointer and setting it anew. A helper makes this arguably easier to read, so add one. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Link: https://lore.kernel.org/r/20210323153714.25120-2-a.fatoum@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-05s390/irq: fix reading of ext_params2 field from lowcoreHeiko Carstens
The contents of the ext_params2 field of the lowcore should just be copied to the pt_regs structure, not dereferenced. Fixes crashes / program check loops like this: Krnl PSW : 0404c00180000000 00000000d6d02b3c (do_ext_irq+0x74/0x170) R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 RI:0 EA:3 Krnl GPRS: 0000000000000000 80000000000b974e 00000000d71abee0 00000000d71abee0 0000000080030000 000000000000000f 0000000000000000 0000000000000000 0000000000000001 00000380000bf918 00000000d73ef780 00000380000bf518 0000000080348000 00000000d6d13350 00000000d6d02b1e 00000380000bf428 Krnl Code: 00000000d6d02b2e: 58100080 l %r1,128 00000000d6d02b32: 5010b0a4 st %r1,164(%r11) #00000000d6d02b36: e31001b80104 lg %r1,4536 >00000000d6d02b3c: e31010000004 lg %r1,0(%r1) 00000000d6d02b42: e310b0a80024 stg %r1,168(%r11) 00000000d6d02b48: c01000242270 larl %r1,00000000d7187028 00000000d6d02b4e: d5071000b010 clc 0(8,%r1),16(%r11) 00000000d6d02b54: a784001b brc 8,00000000d6d02b8a Call Trace: [<00000000d6d02b3c>] do_ext_irq+0x74/0x170 [<00000000d6d0ea5c>] ext_int_handler+0xc4/0xf4 [<00000000d621d266>] die+0x106/0x188 [<00000000d62305b8>] do_no_context+0xc8/0x100 [<00000000d6d02790>] __do_pgm_check+0xe0/0x1f0 [<00000000d6d0e950>] pgm_check_handler+0x118/0x160 [<00000000d6d02b3c>] do_ext_irq+0x74/0x170 [<00000000d6d0ea5c>] ext_int_handler+0xc4/0xf4 [<00000000d621d266>] die+0x106/0x188 [<00000000d62305b8>] do_no_context+0xc8/0x100 [<00000000d6d02790>] __do_pgm_check+0xe0/0x1f0 [<00000000d6d0e950>] pgm_check_handler+0x118/0x160 [<00000000d6d02b3c>] do_ext_irq+0x74/0x170 [<00000000d6d0ea5c>] ext_int_handler+0xc4/0xf4 [<0000000000000000>] 0x0 [<00000000d6d0e57a>] default_idle_call+0x42/0x110 [<00000000d629856e>] do_idle+0xce/0x160 [<00000000d62987be>] cpu_startup_entry+0x36/0x40 [<00000000d621f2f2>] smp_start_secondary+0x82/0x88 Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Fixes: 56e62a737028 ("s390: convert to generic entry") Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-04-05s390/unwind: add machine check handler stackVasily Gorbik
Fixes: b61b1595124a ("s390: add stack for machine check handler") Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-04-05s390/cpcmd: fix inline assembly register clobberingAlexander Gordeev
Register variables initialized using arithmetic. That leads to kasan instrumentaton code corrupting the registers contents. Follow GCC guidlines and use temporary variables for assigning init values to register variables. Fixes: 94c12cc7d196 ("[S390] Inline assembly cleanup.") Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Acked-by: Ilya Leoshkevich <iii@linux.ibm.com> Link: https://gcc.gnu.org/onlinedocs/gcc-10.2.0/gcc/Local-Register-Variables.html Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-04-05driver core: Improve fw_devlink & deferred_probe_timeout interactionSaravana Kannan
deferred_probe_timeout kernel commandline parameter allows probing of consumer devices if the supplier devices don't have any drivers. fw_devlink=on will indefintely block probe() calls on a device if all its suppliers haven't probed successfully. This completely skips calls to driver_deferred_probe_check_state() since that's only called when a .probe() function calls framework APIs. So fw_devlink=on breaks deferred_probe_timeout. deferred_probe_timeout in its current state also ignores a lot of information that's now available to the kernel. It assumes all suppliers that haven't probed when the timer expires (or when initcalls are done on a static kernel) will never probe and fails any calls to acquire resources from these unprobed suppliers. However, this assumption by deferred_probe_timeout isn't true under many conditions. For example: - If the consumer happens to be before the supplier in the deferred probe list. - If the supplier itself is waiting on its supplier to probe. This patch fixes both these issues by relaxing device links between devices only if the supplier doesn't have any driver that could match with (NOT bound to) the supplier device. This way, we only fail attempts to acquire resources from suppliers that truly don't have any driver vs suppliers that just happen to not have probed yet. Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20210402040342.2944858-3-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-05driver core: Fix locking bug in deferred_probe_timeout_work_func()Saravana Kannan
list_for_each_entry_safe() is only useful if we are deleting nodes in a linked list within the loop. It doesn't protect against other threads adding/deleting nodes to the list in parallel. We need to grab deferred_probe_mutex when traversing the deferred_probe_pending_list. Cc: stable@vger.kernel.org Fixes: 25b4e70dcce9 ("driver core: allow stopping deferred probe after init") Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20210402040342.2944858-2-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-05usbip: synchronize event handler with sysfs code pathsShuah Khan
Fuzzing uncovered race condition between sysfs code paths in usbip drivers. Device connect/disconnect code paths initiated through sysfs interface are prone to races if disconnect happens during connect and vice versa. Use sysfs_lock to synchronize event handler with sysfs paths in usbip drivers. Cc: stable@vger.kernel.org Reported-and-tested-by: syzbot+a93fba6d384346a761e3@syzkaller.appspotmail.com Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/c5c8723d3f29dfe3d759cfaafa7dd16b0dfe2918.1616807117.git.skhan@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-05usbip: vudc synchronize sysfs code pathsShuah Khan
Fuzzing uncovered race condition between sysfs code paths in usbip drivers. Device connect/disconnect code paths initiated through sysfs interface are prone to races if disconnect happens during connect and vice versa. Use sysfs_lock to protect sysfs paths in vudc. Cc: stable@vger.kernel.org Reported-and-tested-by: syzbot+a93fba6d384346a761e3@syzkaller.appspotmail.com Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/caabcf3fc87bdae970509b5ff32d05bb7ce2fb15.1616807117.git.skhan@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-05usbip: stub-dev synchronize sysfs code pathsShuah Khan
Fuzzing uncovered race condition between sysfs code paths in usbip drivers. Device connect/disconnect code paths initiated through sysfs interface are prone to races if disconnect happens during connect and vice versa. Use sysfs_lock to protect sysfs paths in stub-dev. Cc: stable@vger.kernel.org Reported-and-tested-by: syzbot+a93fba6d384346a761e3@syzkaller.appspotmail.com Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/2b182f3561b4a065bf3bf6dce3b0e9944ba17b3f.1616807117.git.skhan@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-05usbip: add sysfs_lock to synchronize sysfs code pathsShuah Khan
Fuzzing uncovered race condition between sysfs code paths in usbip drivers. Device connect/disconnect code paths initiated through sysfs interface are prone to races if disconnect happens during connect and vice versa. This problem is common to all drivers while it can be reproduced easily in vhci_hcd. Add a sysfs_lock to usbip_device struct to protect the paths. Use this in vhci_hcd to protect sysfs paths. For a complete fix, usip_host and usip-vudc drivers and the event handler will have to use this lock to protect the paths. These changes will be done in subsequent patches. Cc: stable@vger.kernel.org Reported-and-tested-by: syzbot+a93fba6d384346a761e3@syzkaller.appspotmail.com Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/b6568f7beae702bbc236a545d3c020106ca75eac.1616807117.git.skhan@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-05Merge tag 'v5.12-rc5' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-linus Peter writes: Fixes one issue with dequeuing requests after disabling endpoint for cdnsp udc driver * tag 'v5.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb: usb: cdnsp: Fixes issue with dequeuing requests after disabling endpoint
2021-04-05Merge 5.12-rc6 into driver-core-nextGreg Kroah-Hartman
We need the driver core fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-04Linux 5.12-rc6Linus Torvalds
2021-04-04firewire: nosy: Fix a use-after-free bug in nosy_ioctl()Zheyu Ma
For each device, the nosy driver allocates a pcilynx structure. A use-after-free might happen in the following scenario: 1. Open nosy device for the first time and call ioctl with command NOSY_IOC_START, then a new client A will be malloced and added to doubly linked list. 2. Open nosy device for the second time and call ioctl with command NOSY_IOC_START, then a new client B will be malloced and added to doubly linked list. 3. Call ioctl with command NOSY_IOC_START for client A, then client A will be readded to the doubly linked list. Now the doubly linked list is messed up. 4. Close the first nosy device and nosy_release will be called. In nosy_release, client A will be unlinked and freed. 5. Close the second nosy device, and client A will be referenced, resulting in UAF. The root cause of this bug is that the element in the doubly linked list is reentered into the list. Fix this bug by adding a check before inserting a client. If a client is already in the linked list, don't insert it. The following KASAN report reveals it: BUG: KASAN: use-after-free in nosy_release+0x1ea/0x210 Write of size 8 at addr ffff888102ad7360 by task poc CPU: 3 PID: 337 Comm: poc Not tainted 5.12.0-rc5+ #6 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 Call Trace: nosy_release+0x1ea/0x210 __fput+0x1e2/0x840 task_work_run+0xe8/0x180 exit_to_user_mode_prepare+0x114/0x120 syscall_exit_to_user_mode+0x1d/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xae Allocated by task 337: nosy_open+0x154/0x4d0 misc_open+0x2ec/0x410 chrdev_open+0x20d/0x5a0 do_dentry_open+0x40f/0xe80 path_openat+0x1cf9/0x37b0 do_filp_open+0x16d/0x390 do_sys_openat2+0x11d/0x360 __x64_sys_open+0xfd/0x1a0 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xae Freed by task 337: kfree+0x8f/0x210 nosy_release+0x158/0x210 __fput+0x1e2/0x840 task_work_run+0xe8/0x180 exit_to_user_mode_prepare+0x114/0x120 syscall_exit_to_user_mode+0x1d/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xae The buggy address belongs to the object at ffff888102ad7300 which belongs to the cache kmalloc-128 of size 128 The buggy address is located 96 bytes inside of 128-byte region [ffff888102ad7300, ffff888102ad7380) [ Modified to use 'list_empty()' inside proper lock - Linus ] Link: https://lore.kernel.org/lkml/1617433116-5930-1-git-send-email-zheyuma97@gmail.com/ Reported-and-tested-by: 马哲宇 (Zheyu Ma) <zheyuma97@gmail.com> Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-04-04workqueue/watchdog: Make unbound workqueues aware of touch_softlockup_watchdog()Wang Qing
84;0;0c84;0;0c There are two workqueue-specific watchdog timestamps: + @wq_watchdog_touched_cpu (per-CPU) updated by touch_softlockup_watchdog() + @wq_watchdog_touched (global) updated by touch_all_softlockup_watchdogs() watchdog_timer_fn() checks only the global @wq_watchdog_touched for unbound workqueues. As a result, unbound workqueues are not aware of touch_softlockup_watchdog(). The watchdog might report a stall even when the unbound workqueues are blocked by a known slow code. Solution: touch_softlockup_watchdog() must touch also the global @wq_watchdog_touched timestamp. The global timestamp can no longer be used for bound workqueues because it is now updated from all CPUs. Instead, bound workqueues have to check only @wq_watchdog_touched_cpu and these timestamps have to be updated for all CPUs in touch_all_softlockup_watchdogs(). Beware: The change might cause the opposite problem. An unbound workqueue might get blocked on CPU A because of a real softlockup. The workqueue watchdog would miss it when the timestamp got touched on CPU B. It is acceptable because softlockups are detected by softlockup watchdog. The workqueue watchdog is there to detect stalls where a work never finishes, for example, because of dependencies of works queued into the same workqueue. V3: - Modify the commit message clearly according to Petr's suggestion. Signed-off-by: Wang Qing <wangqing@vivo.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2021-04-04workqueue: Move the position of debug_work_activate() in __queue_work()Zqiang
The debug_work_activate() is called on the premise that the work can be inserted, because if wq be in WQ_DRAINING status, insert work may be failed. Fixes: e41e704bc4f4 ("workqueue: improve destroy_workqueue() debuggability") Signed-off-by: Zqiang <qiang.zhang@windriver.com> Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2021-04-03Merge tag 'for-linus' of git://github.com/openrisc/linuxLinus Torvalds
Pull OpenRISC fix from Stafford Horne: "Fix duplicate header include in Litex SOC driver" * tag 'for-linus' of git://github.com/openrisc/linux: soc: litex: Remove duplicated header file inclusion
2021-04-03Merge tag 'io_uring-5.12-2021-04-03' of git://git.kernel.dk/linux-blockLinus Torvalds
POull io_uring fix from Jens Axboe: "Just fixing a silly braino in a previous patch, where we'd end up failing to compile if CONFIG_BLOCK isn't enabled. Not that a lot of people do that, but kernel bot spotted it and it's probably prudent to just flush this out now before -rc6. Sorry about that, none of my test compile configs have !CONFIG_BLOCK" * tag 'io_uring-5.12-2021-04-03' of git://git.kernel.dk/linux-block: io_uring: fix !CONFIG_BLOCK compilation failure
2021-04-04soc: litex: Remove duplicated header file inclusionZhen Lei
The header file <linux/errno.h> is already included above and can be removed here. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Mateusz Holenko <mholenko@antmicro.com> Signed-off-by: Stafford Horne <shorne@gmail.com>
2021-04-03Merge tag 'gfs2-v5.12-rc2-fixes2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2 Pull gfs2 fixes from Andreas Gruenbacher: "Two more gfs2 fixes" * tag 'gfs2-v5.12-rc2-fixes2' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: gfs2: report "already frozen/thawed" errors gfs2: Flag a withdraw if init_threads() fails
2021-04-03Merge tag 'riscv-for-linus-5.12-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fixes from Palmer Dabbelt: "A handful of fixes for 5.12: - fix a stack tracing regression related to "const register asm" variables, which have unexpected behavior. - ensure the value to be written by put_user() is evaluated before enabling access to userspace memory.. - align the exception vector table correctly, so we don't rely on the firmware's handling of unaligned accesses. - build fix to make NUMA depend on MMU, which triggered on some randconfigs" * tag 'riscv-for-linus-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: Make NUMA depend on MMU riscv: remove unneeded semicolon riscv,entry: fix misaligned base for excp_vect_table riscv: evaluate put_user() arg before enabling user access riscv: Drop const annotation for sp
2021-04-03Merge tag 'powerpc-5.12-5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "Fix a bug on pseries where spurious wakeups from H_PROD would prevent partition migration from succeeding. Fix oopses seen in pcpu_alloc(), caused by parallel faults of the percpu mapping causing us to corrupt the protection key used for the mapping, and cause a fatal key fault. Thanks to Aneesh Kumar K.V, Murilo Opsfelder Araujo, and Nathan Lynch" * tag 'powerpc-5.12-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/mm/book3s64: Use the correct storage key value when calling H_PROTECT powerpc/pseries/mobility: handle premature return from H_JOIN powerpc/pseries/mobility: use struct for shared state
2021-04-03Merge tag 'hyperv-fixes-signed-20210402' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull Hyper-V fixes from Wei Liu: "One fix from Lu Yunlong for a double free in hvfb_probe" * tag 'hyperv-fixes-signed-20210402' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: video: hyperv_fb: Fix a double free in hvfb_probe
2021-04-03Merge tag 'driver-core-5.12-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fix from Greg KH: "Here is a single driver core fix for a reported problem with differed probing. It has been in linux-next for a while with no reported problems" * tag 'driver-core-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: driver core: clear deferred probe reason on probe retry
2021-04-03Merge tag 'char-misc-5.12-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are a few small driver char/misc changes for 5.12-rc6. Nothing major here, a few fixes for reported issues: - interconnect fixes for problems found - fbcon syzbot-found fix - extcon fixes - firmware stratix10 bugfix - MAINTAINERS file update. All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: drivers: video: fbcon: fix NULL dereference in fbcon_cursor() mei: allow map and unmap of client dma buffer only for disconnected client MAINTAINERS: Add linux-phy list and patchwork interconnect: Fix kerneldoc warning firmware: stratix10-svc: reset COMMAND_RECONFIG_FLAG_PARTIAL to 0 extcon: Fix error handling in extcon_dev_register extcon: Add stubs for extcon_register_notifier_all() functions interconnect: core: fix error return code of icc_link_destroy() interconnect: qcom: msm8939: remove rpm-ids from non-RPM nodes
2021-04-03Merge tag 'staging-5.12-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver fixes from Greg KH: "Here are two rtl8192e staging driver fixes for reported problems. Both of these have been in linux-next for a while with no reported issues" * tag 'staging-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: rtl8192e: Change state information from u16 to u8 staging: rtl8192e: Fix incorrect source in memcpy()
2021-04-03Merge tag 'tty-5.12-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull serial driver fix from Greg KH: "Here is a single serial driver fix for 5.12-rc6. Is is a revert of a change that showed up in 5.9 that has been reported to cause problems. It has been in linux-next for a while with no reported issues" * tag 'tty-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: soc: qcom-geni-se: Cleanup the code to remove proxy votes
2021-04-03Merge tag 'usb-5.12-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are a few small USB driver fixes for 5.12-rc6 to resolve reported problems. They include: - a number of cdc-acm fixes for reported problems. It seems more people are using this driver lately... - dwc3 driver fixes for reported problems, and fixes for the fixes :) - dwc2 driver fixes for reported issues. - musb driver fix. - new USB quirk additions. All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (23 commits) usb: dwc2: Prevent core suspend when port connection flag is 0 usb: dwc2: Fix HPRT0.PrtSusp bit setting for HiKey 960 board. usb: musb: Fix suspend with devices connected for a64 usb: xhci-mtk: fix broken streams issue on 0.96 xHCI usb: dwc3: gadget: Clear DEP flags after stop transfers in ep disable usbip: vhci_hcd fix shift out-of-bounds in vhci_hub_control() USB: quirks: ignore remote wake-up on Fibocom L850-GL LTE modem USB: cdc-acm: do not log successful probe on later errors USB: cdc-acm: always claim data interface USB: cdc-acm: use negation for NULL checks USB: cdc-acm: clean up probe error labels USB: cdc-acm: drop redundant driver-data reset USB: cdc-acm: drop redundant driver-data assignment USB: cdc-acm: fix use-after-free after probe failure USB: cdc-acm: fix double free on probe failure USB: cdc-acm: downgrade message to debug USB: cdc-acm: untangle a circular dependency between callback and softint cdc-acm: fix BREAK rx code path adding necessary calls usb: gadget: udc: amd5536udc_pci fix null-ptr-dereference usb: dwc3: pci: Enable dis_uX_susphy_quirk for Intel Merrifield ...
2021-04-03Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fix from James Bottomley: "A single fix to iscsi for a rare race condition which can cause a kernel panic" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: iscsi: Fix race condition between login and sync thread
2021-04-02clk: fix invalid usage of list cursor in unregisterLukasz Bartosik
Fix invalid usage of a list_for_each_entry cursor in clk_notifier_unregister(). When list is empty or if the list is completely traversed (without breaking from the loop on one of the entries) then the list cursor does not point to a valid entry and therefore should not be used. The patch fixes a logical bug that hasn't been seen in pratice however it is analogus to the bug fixed in clk_notifier_register(). The issue was dicovered when running 5.12-rc1 kernel on x86_64 with KASAN enabled: BUG: KASAN: global-out-of-bounds in clk_notifier_register+0xab/0x230 Read of size 8 at addr ffffffffa0d10588 by task swapper/0/1 CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.12.0-rc1 #1 Hardware name: Google Caroline/Caroline, BIOS Google_Caroline.7820.430.0 07/20/2018 Call Trace: dump_stack+0xee/0x15c print_address_description+0x1e/0x2dc kasan_report+0x188/0x1ce ? clk_notifier_register+0xab/0x230 ? clk_prepare_lock+0x15/0x7b ? clk_notifier_register+0xab/0x230 clk_notifier_register+0xab/0x230 dw8250_probe+0xc01/0x10d4 ... Memory state around the buggy address: ffffffffa0d10480: 00 00 00 00 00 03 f9 f9 f9 f9 f9 f9 00 00 00 00 ffffffffa0d10500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f9 f9 >ffffffffa0d10580: f9 f9 f9 f9 00 00 00 00 00 00 00 00 00 00 00 00 ^ ffffffffa0d10600: 00 00 00 00 00 00 f9 f9 f9 f9 f9 f9 00 00 00 00 ffffffffa0d10680: 00 00 00 00 00 00 00 00 f9 f9 f9 f9 00 00 00 00 ================================================================== Fixes: b2476490ef11 ("clk: introduce the common clock framework") Reported-by: Lukasz Majczak <lma@semihalf.com> Signed-off-by: Lukasz Bartosik <lb@semihalf.com> Link: https://lore.kernel.org/r/20210401225149.18826-2-lb@semihalf.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
generated by cgit (git 2.34.1) at 2025-10-01 05:39:48 +0000