| Age | Commit message (Collapse) | Author |
|---|
|
The aux_head and aux_wakeup members of struct ring_buffer are defined
using the local_t type, despite the fact that they are only accessed via
the perf_aux_output_*() functions, which cannot race with each other for a
given ring buffer.
This patch changes the type of the members to long, so we can avoid
using the local_*() API where it isn't needed.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1502900297-21839-1-git-send-email-will.deacon@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Regardless of which events form a group, it does not make sense for the
events to target different tasks and/or CPUs, as this leaves the group
inconsistent and impossible to schedule. The core perf code assumes that
these are consistent across (successfully intialised) groups.
Core perf code only verifies this when moving SW events into a HW
context. Thus, we can violate this requirement for pure SW groups and
pure HW groups, unless the relevant PMU driver happens to perform this
verification itself. These mismatched groups subsequently wreak havoc
elsewhere.
For example, we handle watchpoints as SW events, and reserve watchpoint
HW on a per-CPU basis at pmu::event_init() time to ensure that any event
that is initialised is guaranteed to have a slot at pmu::add() time.
However, the core code only checks the group leader's cpu filter (via
event_filter_match()), and can thus install follower events onto CPUs
violating thier (mismatched) CPU filters, potentially installing them
into a CPU without sufficient reserved slots.
This can be triggered with the below test case, resulting in warnings
from arch backends.
#define _GNU_SOURCE
#include <linux/hw_breakpoint.h>
#include <linux/perf_event.h>
#include <sched.h>
#include <stdio.h>
#include <sys/prctl.h>
#include <sys/syscall.h>
#include <unistd.h>
static int perf_event_open(struct perf_event_attr *attr, pid_t pid, int cpu,
int group_fd, unsigned long flags)
{
return syscall(__NR_perf_event_open, attr, pid, cpu, group_fd, flags);
}
char watched_char;
struct perf_event_attr wp_attr = {
.type = PERF_TYPE_BREAKPOINT,
.bp_type = HW_BREAKPOINT_RW,
.bp_addr = (unsigned long)&watched_char,
.bp_len = 1,
.size = sizeof(wp_attr),
};
int main(int argc, char *argv[])
{
int leader, ret;
cpu_set_t cpus;
/*
* Force use of CPU0 to ensure our CPU0-bound events get scheduled.
*/
CPU_ZERO(&cpus);
CPU_SET(0, &cpus);
ret = sched_setaffinity(0, sizeof(cpus), &cpus);
if (ret) {
printf("Unable to set cpu affinity\n");
return 1;
}
/* open leader event, bound to this task, CPU0 only */
leader = perf_event_open(&wp_attr, 0, 0, -1, 0);
if (leader < 0) {
printf("Couldn't open leader: %d\n", leader);
return 1;
}
/*
* Open a follower event that is bound to the same task, but a
* different CPU. This means that the group should never be possible to
* schedule.
*/
ret = perf_event_open(&wp_attr, 0, 1, leader, 0);
if (ret < 0) {
printf("Couldn't open mismatched follower: %d\n", ret);
return 1;
} else {
printf("Opened leader/follower with mismastched CPUs\n");
}
/*
* Open as many independent events as we can, all bound to the same
* task, CPU0 only.
*/
do {
ret = perf_event_open(&wp_attr, 0, 0, -1, 0);
} while (ret >= 0);
/*
* Force enable/disble all events to trigger the erronoeous
* installation of the follower event.
*/
printf("Opened all events. Toggling..\n");
for (;;) {
prctl(PR_TASK_PERF_EVENTS_DISABLE, 0, 0, 0, 0);
prctl(PR_TASK_PERF_EVENTS_ENABLE, 0, 0, 0, 0);
}
return 0;
}
Fix this by validating this requirement regardless of whether we're
moving events.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Zhou Chengming <zhouchengming1@huawei.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1498142498-15758-1-git-send-email-mark.rutland@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The following commit:
39a0526fb3f7 ("x86/mm: Factor out LDT init from context init")
renamed init_new_context() to init_new_context_ldt() and added a new
init_new_context() which calls init_new_context_ldt(). However, the
error code of init_new_context_ldt() was ignored. Consequently, if a
memory allocation in alloc_ldt_struct() failed during a fork(), the
->context.ldt of the new task remained the same as that of the old task
(due to the memcpy() in dup_mm()). ldt_struct's are not intended to be
shared, so a use-after-free occurred after one task exited.
Fix the bug by making init_new_context() pass through the error code of
init_new_context_ldt().
This bug was found by syzkaller, which encountered the following splat:
BUG: KASAN: use-after-free in free_ldt_struct.part.2+0x10a/0x150 arch/x86/kernel/ldt.c:116
Read of size 4 at addr ffff88006d2cb7c8 by task kworker/u9:0/3710
CPU: 1 PID: 3710 Comm: kworker/u9:0 Not tainted 4.13.0-rc4-next-20170811 #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:16 [inline]
dump_stack+0x194/0x257 lib/dump_stack.c:52
print_address_description+0x73/0x250 mm/kasan/report.c:252
kasan_report_error mm/kasan/report.c:351 [inline]
kasan_report+0x24e/0x340 mm/kasan/report.c:409
__asan_report_load4_noabort+0x14/0x20 mm/kasan/report.c:429
free_ldt_struct.part.2+0x10a/0x150 arch/x86/kernel/ldt.c:116
free_ldt_struct arch/x86/kernel/ldt.c:173 [inline]
destroy_context_ldt+0x60/0x80 arch/x86/kernel/ldt.c:171
destroy_context arch/x86/include/asm/mmu_context.h:157 [inline]
__mmdrop+0xe9/0x530 kernel/fork.c:889
mmdrop include/linux/sched/mm.h:42 [inline]
exec_mmap fs/exec.c:1061 [inline]
flush_old_exec+0x173c/0x1ff0 fs/exec.c:1291
load_elf_binary+0x81f/0x4ba0 fs/binfmt_elf.c:855
search_binary_handler+0x142/0x6b0 fs/exec.c:1652
exec_binprm fs/exec.c:1694 [inline]
do_execveat_common.isra.33+0x1746/0x22e0 fs/exec.c:1816
do_execve+0x31/0x40 fs/exec.c:1860
call_usermodehelper_exec_async+0x457/0x8f0 kernel/umh.c:100
ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:431
Allocated by task 3700:
save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59
save_stack+0x43/0xd0 mm/kasan/kasan.c:447
set_track mm/kasan/kasan.c:459 [inline]
kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:551
kmem_cache_alloc_trace+0x136/0x750 mm/slab.c:3627
kmalloc include/linux/slab.h:493 [inline]
alloc_ldt_struct+0x52/0x140 arch/x86/kernel/ldt.c:67
write_ldt+0x7b7/0xab0 arch/x86/kernel/ldt.c:277
sys_modify_ldt+0x1ef/0x240 arch/x86/kernel/ldt.c:307
entry_SYSCALL_64_fastpath+0x1f/0xbe
Freed by task 3700:
save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59
save_stack+0x43/0xd0 mm/kasan/kasan.c:447
set_track mm/kasan/kasan.c:459 [inline]
kasan_slab_free+0x71/0xc0 mm/kasan/kasan.c:524
__cache_free mm/slab.c:3503 [inline]
kfree+0xca/0x250 mm/slab.c:3820
free_ldt_struct.part.2+0xdd/0x150 arch/x86/kernel/ldt.c:121
free_ldt_struct arch/x86/kernel/ldt.c:173 [inline]
destroy_context_ldt+0x60/0x80 arch/x86/kernel/ldt.c:171
destroy_context arch/x86/include/asm/mmu_context.h:157 [inline]
__mmdrop+0xe9/0x530 kernel/fork.c:889
mmdrop include/linux/sched/mm.h:42 [inline]
__mmput kernel/fork.c:916 [inline]
mmput+0x541/0x6e0 kernel/fork.c:927
copy_process.part.36+0x22e1/0x4af0 kernel/fork.c:1931
copy_process kernel/fork.c:1546 [inline]
_do_fork+0x1ef/0xfb0 kernel/fork.c:2025
SYSC_clone kernel/fork.c:2135 [inline]
SyS_clone+0x37/0x50 kernel/fork.c:2129
do_syscall_64+0x26c/0x8c0 arch/x86/entry/common.c:287
return_from_SYSCALL_64+0x0/0x7a
Here is a C reproducer:
#include <asm/ldt.h>
#include <pthread.h>
#include <signal.h>
#include <stdlib.h>
#include <sys/syscall.h>
#include <sys/wait.h>
#include <unistd.h>
static void *fork_thread(void *_arg)
{
fork();
}
int main(void)
{
struct user_desc desc = { .entry_number = 8191 };
syscall(__NR_modify_ldt, 1, &desc, sizeof(desc));
for (;;) {
if (fork() == 0) {
pthread_t t;
srand(getpid());
pthread_create(&t, NULL, fork_thread, NULL);
usleep(rand() % 10000);
syscall(__NR_exit_group, 0);
}
wait(NULL);
}
}
Note: the reproducer takes advantage of the fact that alloc_ldt_struct()
may use vmalloc() to allocate a large ->entries array, and after
commit:
5d17a73a2ebe ("vmalloc: back off when the current task is killed")
it is possible for userspace to fail a task's vmalloc() by
sending a fatal signal, e.g. via exit_group(). It would be more
difficult to reproduce this bug on kernels without that commit.
This bug only affected kernels with CONFIG_MODIFY_LDT_SYSCALL=y.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: <stable@vger.kernel.org> [v4.6+]
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Fixes: 39a0526fb3f7 ("x86/mm: Factor out LDT init from context init")
Link: http://lkml.kernel.org/r/20170824175029.76040-1-ebiggers3@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The host pkru is restored right after vcpu exit (commit 1be0e61), so
KVM_GET_XSAVE will return the host PKRU value instead. Fix this by
using the guest PKRU explicitly in fill_xsave and load_xsave. This
part is based on a patch by Junkang Fu.
The host PKRU data may also not match the value in vcpu->arch.guest_fpu.state,
because it could have been changed by userspace since the last time
it was saved, so skip loading it in kvm_load_guest_fpu.
Reported-by: Junkang Fu <junkang.fjk@alibaba-inc.com>
Cc: Yang Zhang <zy107165@alibaba-inc.com>
Fixes: 1be0e61c1f255faaeab04a390e00c8b9b9042870
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Move it to struct kvm_arch_vcpu, replacing guest_pkru_valid with a
simple comparison against the host value of the register. The write of
PKRU in addition can be skipped if the guest has not enabled the feature.
Once we do this, we need not test OSPKE in the host anymore, because
guest_CR4.PKE=1 implies host_CR4.PKE=1.
The static PKU test is kept to elide the code on older CPUs.
Suggested-by: Yang Zhang <zy107165@alibaba-inc.com>
Fixes: 1be0e61c1f255faaeab04a390e00c8b9b9042870
Cc: stable@vger.kernel.org
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
If the host has protection keys disabled, we cannot read and write the
guest PKRU---RDPKRU and WRPKRU fail with #GP(0) if CR4.PKE=0. Block
the PKU cpuid bit in that case.
This ensures that guest_CR4.PKE=1 implies host_CR4.PKE=1.
Fixes: 1be0e61c1f255faaeab04a390e00c8b9b9042870
Cc: stable@vger.kernel.org
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
We use skb_availroom to calculate the skb tailroom for the
ESP trailer. skb_availroom calculates the tailroom and
subtracts this value by reserved_tailroom. However
reserved_tailroom is a union with the skb mark. This means
that we subtract the tailroom by the skb mark if set.
Fix this by using skb_tailroom instead.
Fixes: cac2661c53f3 ("esp4: Avoid skb_cow_data whenever possible")
Fixes: 03e2a30f6a27 ("esp6: Avoid skb_cow_data whenever possible")
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
We allocate the page fragment for the ESP trailer inside
a spinlock, but consume it outside of the lock. This
is racy as some other cou could get the same page fragment
then. Fix this by consuming the page fragment inside the
lock too.
Fixes: cac2661c53f3 ("esp4: Avoid skb_cow_data whenever possible")
Fixes: 03e2a30f6a27 ("esp6: Avoid skb_cow_data whenever possible")
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
DRM core already checks the validity of the pixelformat.
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
A recent commit (272725c7db4da1fd3229d944fc76d2e98e3a144e) has removed
the use of 'bits_per_pixel' in DRM. However the corresponding Exynos
driver code still uses the ambiguous 'bpp', even though it is now
initialized from fb->cpp[0].
Consistenly use 'cpp' in FIMD, DECON7 and DECON5433 drivers.
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
|
|
There is a deadlock possible when canceling the link status
delayed work queue. The removal process is run with RTNL held,
and the link status callback is acquring RTNL.
Resolve the issue by using trylock and rescheduling.
If cancel is in process, that block it from happening.
Fixes: 122a5f6410f4 ("staging: hv: use delayed_work for netvsc_send_garp()")
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Parthasarathy Bhuvaragan says:
====================
tipc: buffer reassignment fixes
This series contains fixes for buffer reassignments and a context imbalance.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If we fail to find a valid bearer in tipc_node_get_linkname(),
node_read_unlock() is called without holding the node read lock.
This commit fixes this error.
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In tipc_msg_reverse(), we assign skb attributes to local pointers
in stack at startup. This is followed by skb_linearize() and for
cloned buffers we perform skb relocation using pskb_expand_head().
Both these methods may update the skb attributes and thus making
the pointers incorrect.
In this commit, we fix this error by ensuring that the pointers
are re-assigned after any of these skb operations.
Fixes: 29042e19f2c60 ("tipc: let function tipc_msg_reverse() expand header
when needed")
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In tipc_rcv(), we linearize only the header and usually the packets
are consumed as the nodes permit direct reception. However, if the
skb contains tunnelled message due to fail over or synchronization
we parse it in tipc_node_check_state() without performing
linearization. This will cause link disturbances if the skb was
non linear.
In this commit, we perform linearization for the above messages.
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
syzkaller reported a refcount_t warning [1]
Issue here is that noop_qdisc refcnt was never really considered as
a true refcount, since qdisc_destroy() found TCQ_F_BUILTIN set :
if (qdisc->flags & TCQ_F_BUILTIN ||
!refcount_dec_and_test(&qdisc->refcnt)))
return;
Meaning that all atomic_inc() we did on noop_qdisc.refcnt were not
really needed, but harmless until refcount_t came.
To fix this problem, we simply need to not increment noop_qdisc.refcnt,
since we never decrement it.
[1]
refcount_t: increment on 0; use-after-free.
------------[ cut here ]------------
WARNING: CPU: 0 PID: 21754 at lib/refcount.c:152 refcount_inc+0x47/0x50 lib/refcount.c:152
Kernel panic - not syncing: panic_on_warn set ...
CPU: 0 PID: 21754 Comm: syz-executor7 Not tainted 4.13.0-rc6+ #20
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:16 [inline]
dump_stack+0x194/0x257 lib/dump_stack.c:52
panic+0x1e4/0x417 kernel/panic.c:180
__warn+0x1c4/0x1d9 kernel/panic.c:541
report_bug+0x211/0x2d0 lib/bug.c:183
fixup_bug+0x40/0x90 arch/x86/kernel/traps.c:190
do_trap_no_signal arch/x86/kernel/traps.c:224 [inline]
do_trap+0x260/0x390 arch/x86/kernel/traps.c:273
do_error_trap+0x120/0x390 arch/x86/kernel/traps.c:310
do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:323
invalid_op+0x1e/0x30 arch/x86/entry/entry_64.S:846
RIP: 0010:refcount_inc+0x47/0x50 lib/refcount.c:152
RSP: 0018:ffff8801c43477a0 EFLAGS: 00010282
RAX: 000000000000002b RBX: ffffffff86093c14 RCX: 0000000000000000
RDX: 000000000000002b RSI: ffffffff8159314e RDI: ffffed0038868ee8
RBP: ffff8801c43477a8 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff86093ac0
R13: 0000000000000001 R14: ffff8801d0f3bac0 R15: dffffc0000000000
attach_default_qdiscs net/sched/sch_generic.c:792 [inline]
dev_activate+0x7d3/0xaa0 net/sched/sch_generic.c:833
__dev_open+0x227/0x330 net/core/dev.c:1380
__dev_change_flags+0x695/0x990 net/core/dev.c:6726
dev_change_flags+0x88/0x140 net/core/dev.c:6792
dev_ifsioc+0x5a6/0x930 net/core/dev_ioctl.c:256
dev_ioctl+0x2bc/0xf90 net/core/dev_ioctl.c:554
sock_do_ioctl+0x94/0xb0 net/socket.c:968
sock_ioctl+0x2c2/0x440 net/socket.c:1058
vfs_ioctl fs/ioctl.c:45 [inline]
do_vfs_ioctl+0x1b1/0x1520 fs/ioctl.c:685
SYSC_ioctl fs/ioctl.c:700 [inline]
SyS_ioctl+0x8f/0xc0 fs/ioctl.c:691
Fixes: 7b9364050246 ("net, sched: convert Qdisc.refcnt from atomic_t to refcount_t")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Reshetova, Elena <elena.reshetova@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Version 4 of the ONFI spec mandates that tADL be at least 400 nanoseconds,
but, depending on the master clock rate, 400 ns may not fit in the tADL
field of the SMC reg. We need to relax the check and accept the -ERANGE
return code.
Note that previous versions of the ONFI spec had a lower tADL_min (100 or
200 ns). It's not clear why this timing constraint got increased but it
seems most NANDs are fine with values lower than 400ns, so we should be
safe.
Fixes: f9ce2eddf176 ("mtd: nand: atmel: Add ->setup_data_interface() hooks")
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Tested-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
|
|
The debugfs entries must be removed before an error is returned in the
probe function. Otherwise another try to load the module fails and when
the debugfs files are accessed without the module loaded, the kernel
still tries to call a function in that module.
Fixes: 5346c27c5fed ("mtd: nandsim: Introduce debugfs infrastructure")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Richard Weinberger <richard@nod.at>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
|
|
We always translate the dma address such that the offsets of
the source image are zero. Hence we can remove manipulation of
the MXR_GRAPHIC_SXY(win) register and just zero them once
in mixer_win_reset().
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
DRM core already checks in drm_atomic_plane_check() if the
pixelformat is valid. Hence we can collapse the default case
of the switch statement with the XRGB8888 case.
No functional change.
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
DRM core already checks in drm_atomic_plane_check() if the
pixelformat is valid. Hence we can drop the default case of
the switch statement and collapse most of the code.
Also rename the two booleans to reflect what true/false
actually means, and to avoid mixing CrCb/NV21 descriptions.
No functional change.
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
The video processor supports a tiled version of the NV12 format,
known as NV12MT in V4L2 terms. The support was removed in commit
083500baefd5f4c215a5a93aef2492c1aa775828 due to not being a real
pixel format, but rather NV12 with a special memory layout.
With the introduction of FB modifiers, we can now properly support
this format again.
Tested with a hacked up modetest from libdrm's test suite on
an ODROID-X2 (Exynos4412).
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
The current comment sounds like the division op is done to
compensate for some hardware erratum. But the chroma plane
having half the height of the luma plane is just the way
NV12/NV21 is defined, so clarify this behaviour.
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
Since i80/command mode is determined in runtime by propagating info
from panel this property can be removed.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
Since i80/command mode is determined in runtime by propagating info
from panel this property can be removed.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
Since panel's mode of work is propagated properly from panel to DECON,
there is no need to use redundant private device tree property.
The only issue with such approach is that check for required interrupts
should be postponed until panel communicate its requirements, ie to
mode validation phase - mode_valid callback.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
|
|
crtc::mode_valid callback is required to implement proper pipeline
validation for command/video modes. Since Exynos uses private
framework such callback should be added to it.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
To allow runtime validation of mode of work irq request
code should be split into two separate phases:
- irq reqesting,
- irq checking.
Following patches will move 2nd phase to mode validation phase.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
MIC driver should use info from CRTC to check mode of work instead of
illegally peeking into nodes of other devices.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
mipi_dsi framework provides information about panel's mode of work.
This info should be propagated upstream to configure all elements of
the pipeline. As CRTC is the common denominator of the pipeline we can
put such info into its structures.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
Description of drm_helper_hpd_irq_event clearly states that drivers
supporting hotplug events per connector should use different helper -
drm_kms_helper_hotplug_event. To achieve it following changes have
been performed:
- moved down all DSI ops - they require exynos_dsi_disable function
to be defined earlier,
- simplified exynos_dsi_detect - there is no real detection, it just
returns if panel is attached,
- DSI attach/detach callbacks attaches/detaches DRM panel and sets
connector status and other context fields accordingly, all this is
performed under mutex, as these callbacks are asynchronous.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
All encoders share the same code to set encoders possible_crtcs field.
The patch creates helper to abstract out this code.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
Linux core provide helpers for polling with timeout, lets use them.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
In case bcm_sysport_init_tx_ring() is not able to allocate ring->cbs, we
would return with an error, and call bcm_sysport_fini_tx_ring() and it
would see that ring->cbs is NULL and do nothing. This would leak the
coherent DMA descriptor area, so we need to free it on error before
returning.
Reported-by: Eric Dumazet <edumazet@gmail.com>
Fixes: 80105befdb4b ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There are 3 spots where we call dev_kfree_skb() but we are actually
just doing a normal SKB consumption: __bcmgenet_tx_reclaim() for normal
TX reclamation, bcmgenet_alloc_rx_buffers() during the initial RX ring
setup and bcmgenet_free_rx_buffers() during RX ring cleanup.
Fixes: d6707bec5986 ("net: bcmgenet: rewrite bcmgenet_rx_refill()")
Fixes: f48bed16a756 ("net: bcmgenet: Free skb after last Tx frag")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch fixes a bug causing any sock operations to always return EINVAL.
Fixes: a5192c52377e ("bpf: fix to bpf_setsockops").
Reported-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Craig Gallek <kraig@google.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Utilize dev_consume_skb_any(cb->skb) in bcm_sysport_free_cb() which is
used when a TX packet is completed, as well as when the RX ring is
cleaned on shutdown. None of these two cases are packet drops, so be
drop monitor friendly.
Suggested-by: Eric Dumazet <edumazet@gmail.com>
Fixes: 80105befdb4b ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into drm-next
sun4i DRM changes for 4.14, take 2
A single patch switching to a new OF helper.
* tag 'sunxi-drm-for-4.14-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
drm/sun4i: use of_graph_get_remote_endpoint()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux into drm-next
omapdrm fixes for 4.14
* fix compilation when compiling omapfb driver
* WA for OMAP3 endless sync lost issue
* WA for OMAP5 DSI PLL issue
* fix analog TV out modecheck
* tag 'omapdrm-4.14-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux:
ARM: OMAP2+: fix missing variable declaration
drm/omap: work-around for omap3 display enable
drm/omap: fix i886 work-around
drm/omap: fix analog tv-out modecheck
|
|
git://people.freedesktop.org/~robclark/linux into drm-next
Updates for 4.14.. I have some further patches from Jordan to add
multiple priority levels and pre-emption, but those will probably be
for 4.15 to give me time for the mesa parts.
* tag 'drm-msm-next-2017-08-22' of git://people.freedesktop.org/~robclark/linux:
drm/msm/mdp5: mark runtime_pm functions as __maybe_unused
drm/msm: remove unused variable
drm/msm/mdp5: make helper function static
drm/msm: make msm_framebuffer_init() static
drm/msm: add helper to allocate stolen fb
drm/msm: don't track fbdev's gem object separately
drm/msm: add modeset module param
drm/msm/mdp5: add tracking for clk enable-count
drm/msm: remove unused define
drm/msm: Add a helper function for in-kernel buffer allocations
drm/msm: Attach the GPU MMU when it is created
drm/msm: Add A5XX hardware fault detection
drm/msm: Remove uneeded platform dev members
drm/msm/mdp5: Set up runtime PM for MDSS
drm/msm/mdp5: Write to SMP registers even if allocations don't change
drm/msm/mdp5: Don't use mode_set helper funcs for encoders and CRTCs
drm/msm/dsi: Implement RPM suspend/resume callbacks
drm/msm/dsi: Set up runtime PM for DSI
drm/msm/hdmi: Set up runtime PM for HDMI
drm/msm/mdp5: Use runtime PM get/put API instead of toggling clocks
|
|
git://anongit.freedesktop.org/git/drm-misc into drm-fixes
Core Changes:
- Release driver tracking before making the object available again (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
* tag 'drm-misc-fixes-2017-08-24' of git://anongit.freedesktop.org/git/drm-misc:
drm: Release driver tracking before making the object available again
|
|
git://anongit.freedesktop.org/git/drm-intel into drm-fixes
drm/i915 fixes for v4.13-rc7
* tag 'drm-intel-fixes-2017-08-24' of git://anongit.freedesktop.org/git/drm-intel:
drm/i915/gvt: Fix the kernel null pointer error
drm/i915: Clear lost context-switch interrupts across reset
drm/i915/bxt: use NULL for GPIO connection ID
drm/i915/cnl: Fix LSPCON support.
drm/i915/vbt: ignore extraneous child devices for a port
drm/i915: Initialize 'data' in intel_dsi_dcs_backlight.c
|
|
Fixed the issue that two finger scroll does not work correctly
on V8 protocol. The cause is that V8 protocol X-coordinate decode
is wrong at SS4 PLUS device. I added SS4 PLUS X decode definition.
Mote notes:
the problem manifests itself by the commit e7348396c6d5 ("Input: ALPS
- fix V8+ protocol handling (73 03 28)"), where a fix for the V8+
protocol was applied. Although the culprit must have been present
beforehand, the two-finger scroll worked casually even with the
wrongly reported values by some reason. It got broken by the commit
above just because it changed x_max value, and this made libinput
correctly figuring the MT events. Since the X coord is reported as
falsely doubled, the events on the right-half side go outside the
boundary, thus they are no longer handled. This resulted as a broken
two-finger scroll.
One finger event is decoded differently, and it didn't suffer from
this problem. The problem was only about MT events. --tiwai
Fixes: e7348396c6d5 ("Input: ALPS - fix V8+ protocol handling (73 03 28)")
Signed-off-by: Masaki Ota <masaki.ota@jp.alps.com>
Tested-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Paul Donohue <linux-kernel@PaulSD.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull more rdma fixes from Doug Ledford:
"Well, I thought we were going to be done for this -rc cycle. I should
have known better than to say so though.
We have four additional items that trickled in.
One was a simple mistake on my part. I took a patch into my for-next
thinking that the issue was less severe than it was. I was then
notified that it needed to be in my -rc area instead.
The other three were just found late in testing.
Summary:
- One core fix accidentally applied first to for-next and then cherry
picked back because it needed to be in the -rc cycles instead
- Another core fix
- Two mlx5 fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
IB/mlx5: Always return success for RoCE modify port
IB/mlx5: Fix Raw Packet QP event handler assignment
IB/core: Avoid accessing non-allocated memory when inferring port type
RDMA/uverbs: Initialize cq_context appropriately
|
|
While running nfs/connectathon tests kernel NULL-pointer exception
has been observed due to races in svcsock.c.
Race is appear when kernel accepts connection by kernel_accept
(which creates new socket) and start queuing ingress packets
to new socket. This happens in ksoftirq context which could run
concurrently on a different core while new socket setup is not done yet.
The fix is to re-order socket user data init sequence and add
write/read barrier calls to be sure that we got proper values
for callback pointers before actually calling them.
Test results: nfs/connectathon reports '0' failed tests for about 200+ iterations.
Crash log:
---<-snip->---
[ 6708.638984] Unable to handle kernel NULL pointer dereference at virtual address 00000000
[ 6708.647093] pgd = ffff0000094e0000
[ 6708.650497] [00000000] *pgd=0000010ffff90003, *pud=0000010ffff90003, *pmd=0000010ffff80003, *pte=0000000000000000
[ 6708.660761] Internal error: Oops: 86000005 [#1] SMP
[ 6708.665630] Modules linked in: nfsv3 nfnetlink_queue nfnetlink_log nfnetlink rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache overlay xt_CONNSECMARK xt_SECMARK xt_conntrack iptable_security ip_tables ah4 xfrm4_mode_transport sctp tun binfmt_misc ext4 jbd2 mbcache loop tcp_diag udp_diag inet_diag rpcrdma ib_isert iscsi_target_mod ib_iser rdma_cm iw_cm libiscsi scsi_transport_iscsi ib_srpt target_core_mod ib_srp scsi_transport_srp ib_ipoib ib_ucm ib_uverbs ib_umad ib_cm ib_core nls_koi8_u nls_cp932 ts_kmp nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack vfat fat ghash_ce sha2_ce sha1_ce cavium_rng_vf i2c_thunderx sg thunderx_edac i2c_smbus edac_core cavium_rng nfsd auth_rpcgss nfs_acl lockd grace sunrpc xfs libcrc32c nicvf nicpf ast i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops
[ 6708.736446] ttm drm i2c_core thunder_bgx thunder_xcv mdio_thunder mdio_cavium dm_mirror dm_region_hash dm_log dm_mod [last unloaded: stap_3c300909c5b3f46dcacd49aab3334af_87021]
[ 6708.752275] CPU: 84 PID: 0 Comm: swapper/84 Tainted: G W OE 4.11.0-4.el7.aarch64 #1
[ 6708.760787] Hardware name: www.cavium.com CRB-2S/CRB-2S, BIOS 0.3 Mar 13 2017
[ 6708.767910] task: ffff810006842e80 task.stack: ffff81000689c000
[ 6708.773822] PC is at 0x0
[ 6708.776739] LR is at svc_data_ready+0x38/0x88 [sunrpc]
[ 6708.781866] pc : [<0000000000000000>] lr : [<ffff0000029d7378>] pstate: 60000145
[ 6708.789248] sp : ffff810ffbad3900
[ 6708.792551] x29: ffff810ffbad3900 x28: ffff000008c73d58
[ 6708.797853] x27: 0000000000000000 x26: ffff81000bbe1e00
[ 6708.803156] x25: 0000000000000020 x24: ffff800f7410bf28
[ 6708.808458] x23: ffff000008c63000 x22: ffff000008c63000
[ 6708.813760] x21: ffff800f7410bf28 x20: ffff81000bbe1e00
[ 6708.819063] x19: ffff810012412400 x18: 00000000d82a9df2
[ 6708.824365] x17: 0000000000000000 x16: 0000000000000000
[ 6708.829667] x15: 0000000000000000 x14: 0000000000000001
[ 6708.834969] x13: 0000000000000000 x12: 722e736f622e676e
[ 6708.840271] x11: 00000000f814dd99 x10: 0000000000000000
[ 6708.845573] x9 : 7374687225000000 x8 : 0000000000000000
[ 6708.850875] x7 : 0000000000000000 x6 : 0000000000000000
[ 6708.856177] x5 : 0000000000000028 x4 : 0000000000000000
[ 6708.861479] x3 : 0000000000000000 x2 : 00000000e5000000
[ 6708.866781] x1 : 0000000000000000 x0 : ffff81000bbe1e00
[ 6708.872084]
[ 6708.873565] Process swapper/84 (pid: 0, stack limit = 0xffff81000689c000)
[ 6708.880341] Stack: (0xffff810ffbad3900 to 0xffff8100068a0000)
[ 6708.886075] Call trace:
[ 6708.888513] Exception stack(0xffff810ffbad3710 to 0xffff810ffbad3840)
[ 6708.894942] 3700: ffff810012412400 0001000000000000
[ 6708.902759] 3720: ffff810ffbad3900 0000000000000000 0000000060000145 ffff800f79300000
[ 6708.910577] 3740: ffff000009274d00 00000000000003ea 0000000000000015 ffff000008c63000
[ 6708.918395] 3760: ffff810ffbad3830 ffff800f79300000 000000000000004d 0000000000000000
[ 6708.926212] 3780: ffff810ffbad3890 ffff0000080f88dc ffff800f79300000 000000000000004d
[ 6708.934030] 37a0: ffff800f7930093c ffff000008c63000 0000000000000000 0000000000000140
[ 6708.941848] 37c0: ffff000008c2c000 0000000000040b00 ffff81000bbe1e00 0000000000000000
[ 6708.949665] 37e0: 00000000e5000000 0000000000000000 0000000000000000 0000000000000028
[ 6708.957483] 3800: 0000000000000000 0000000000000000 0000000000000000 7374687225000000
[ 6708.965300] 3820: 0000000000000000 00000000f814dd99 722e736f622e676e 0000000000000000
[ 6708.973117] [< (null)>] (null)
[ 6708.977824] [<ffff0000086f9fa4>] tcp_data_queue+0x754/0xc5c
[ 6708.983386] [<ffff0000086fa64c>] tcp_rcv_established+0x1a0/0x67c
[ 6708.989384] [<ffff000008704120>] tcp_v4_do_rcv+0x15c/0x22c
[ 6708.994858] [<ffff000008707418>] tcp_v4_rcv+0xaf0/0xb58
[ 6709.000077] [<ffff0000086df784>] ip_local_deliver_finish+0x10c/0x254
[ 6709.006419] [<ffff0000086dfea4>] ip_local_deliver+0xf0/0xfc
[ 6709.011980] [<ffff0000086dfad4>] ip_rcv_finish+0x208/0x3a4
[ 6709.017454] [<ffff0000086e018c>] ip_rcv+0x2dc/0x3c8
[ 6709.022328] [<ffff000008692fc8>] __netif_receive_skb_core+0x2f8/0xa0c
[ 6709.028758] [<ffff000008696068>] __netif_receive_skb+0x38/0x84
[ 6709.034580] [<ffff00000869611c>] netif_receive_skb_internal+0x68/0xdc
[ 6709.041010] [<ffff000008696bc0>] napi_gro_receive+0xcc/0x1a8
[ 6709.046690] [<ffff0000014b0fc4>] nicvf_cq_intr_handler+0x59c/0x730 [nicvf]
[ 6709.053559] [<ffff0000014b1380>] nicvf_poll+0x38/0xb8 [nicvf]
[ 6709.059295] [<ffff000008697a6c>] net_rx_action+0x2f8/0x464
[ 6709.064771] [<ffff000008081824>] __do_softirq+0x11c/0x308
[ 6709.070164] [<ffff0000080d14e4>] irq_exit+0x12c/0x174
[ 6709.075206] [<ffff00000813101c>] __handle_domain_irq+0x78/0xc4
[ 6709.081027] [<ffff000008081608>] gic_handle_irq+0x94/0x190
[ 6709.086501] Exception stack(0xffff81000689fdf0 to 0xffff81000689ff20)
[ 6709.092929] fde0: 0000810ff2ec0000 ffff000008c10000
[ 6709.100747] fe00: ffff000008c70ef4 0000000000000001 0000000000000000 ffff810ffbad9b18
[ 6709.108565] fe20: ffff810ffbad9c70 ffff8100169d3800 ffff810006843ab0 ffff81000689fe80
[ 6709.116382] fe40: 0000000000000bd0 0000ffffdf979cd0 183f5913da192500 0000ffff8a254ce4
[ 6709.124200] fe60: 0000ffff8a254b78 0000aaab10339808 0000000000000000 0000ffff8a0c2a50
[ 6709.132018] fe80: 0000ffffdf979b10 ffff000008d6d450 ffff000008c10000 ffff000008d6d000
[ 6709.139836] fea0: 0000000000000054 ffff000008cd3dbc 0000000000000000 0000000000000000
[ 6709.147653] fec0: 0000000000000000 0000000000000000 0000000000000000 ffff81000689ff20
[ 6709.155471] fee0: ffff000008085240 ffff81000689ff20 ffff000008085244 0000000060000145
[ 6709.163289] ff00: ffff81000689ff10 ffff00000813f1e4 ffffffffffffffff ffff00000813f238
[ 6709.171107] [<ffff000008082eb4>] el1_irq+0xb4/0x140
[ 6709.175976] [<ffff000008085244>] arch_cpu_idle+0x44/0x11c
[ 6709.181368] [<ffff0000087bf3b8>] default_idle_call+0x20/0x30
[ 6709.187020] [<ffff000008116d50>] do_idle+0x158/0x1e4
[ 6709.191973] [<ffff000008116ff4>] cpu_startup_entry+0x2c/0x30
[ 6709.197624] [<ffff00000808e7cc>] secondary_start_kernel+0x13c/0x160
[ 6709.203878] [<0000000001bc71c4>] 0x1bc71c4
[ 6709.207967] Code: bad PC value
[ 6709.211061] SMP: stopping secondary CPUs
[ 6709.218830] Starting crashdump kernel...
[ 6709.222749] Bye!
---<-snip>---
Signed-off-by: Vadim Lomovtsev <vlomovts@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
When processing an NFSv4 WRITE operation, argp->end should never
point past the end of the data in the final page of the page list.
Otherwise, nfsd4_decode_compound can walk into uninitialized memory.
More critical, nfsd4_decode_write is failing to increment argp->pagelen
when it increments argp->pagelist. This can cause later xdr decoders
to assume more data is available than really is, which can cause server
crashes on malformed requests.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix two recent regressions (in ACPICA and in the ACPI EC driver)
and one bug in code introduced during the 4.12 cycle (ACPI device
properties library routine).
Specifics:
- Fix a regression in the ACPI EC driver causing a kernel to crash
during initialization on some systems due to a code ordering issue
exposed by a recent change (Lv Zheng).
- Fix a recent regression in ACPICA due to a change of the behavior
of a library function in a way that is not backwards compatible
with some existing callers of it (Rafael Wysocki).
- Fix a coding mistake in a library function related to the handling
of ACPI device properties introduced during the 4.12 cycle (Sakari
Ailus)"
* tag 'acpi-4.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: device property: Fix node lookup in acpi_graph_get_child_prop_value()
ACPICA: Fix acpi_evaluate_object_typed()
ACPI: EC: Fix regression related to wrong ECDT initialization order
|
|
Expose enhanced multi packet WQE capability to user space through
query_device by uhw.
Signed-off-by: Bodong Wang <bodong@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
