| Age | Commit message (Collapse) | Author |
|---|
|
Few dev_err calls are missing newlines. This can result in unrelated
lines getting appended which might make logs difficult to understand.
Add trailing newlines to avoid this.
Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240705075900.424100-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Switching to memdup_user() overwrites the allocated memory only once,
whereas kzalloc() followed by copy_from_user() initializes the allocated
memory to zero and then immediately overwrites it.
Fixes the following Coccinelle/coccicheck warning reported by
memdup_user.cocci:
WARNING opportunity for memdup_user
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240705075900.424100-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Implement "force_ro" sysfs attribute to allow users to set read-write
devices as read-only and back to read-write from userspace. The choice
of the name is based on MMC core 'force_ro' attribute.
This solves a situation where an AT24 I2C EEPROM with GPIO based nWP
signal may have to be occasionally updated. Such I2C EEPROM device is
usually set as read-only during most of the regular system operation,
but in case it has to be updated in a controlled manner, it could be
unlocked using this new "force_ro" sysfs attribute and then re-locked
again.
The "read-only" DT property and config->read_only configuration is
respected and is used to set default state of the device, read-only
or read-write, for devices which do implement .reg_write function.
For devices which do not implement .reg_write function, the device
is unconditionally read-only and the "force_ro" attribute is not
visible.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240705074852.423202-16-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use sysfs_emit() instead of sprintf() to follow best practice per
Documentation/filesystems/sysfs.rst
"
show() should only use sysfs_emit()...
"
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240705074852.423202-15-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Document a type attribute used by userspace to discern different types of
NVMEM devices. The implementation is already present, the ABI document is
missing, add it.
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240705074852.423202-14-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Replace two spaces with tab in the sysfs attribute documentation.
No functional change.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240705074852.423202-13-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The same checks have already been done in sysfs_kf_bin_write() and
sysfs_kf_bin_read() just before the callbacks are invoked.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240705074852.423202-12-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
nvmem_cells_groups is a global variable that is also mutated.
This is complicated and error-prone.
Instead use a normal stack variable.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240705074852.423202-11-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The sysfs core provides a function to easily register a single group.
Use it and remove the now unnecessary nvmem_cells_groups array.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240705074852.423202-10-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add compatible for MT7988 SoC.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240705074852.423202-9-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
On newer SoCs, the eFuse hardware can require a power-domain to operate,
add it as optional.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240705074852.423202-8-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This device currently reports an "Unknown" type in sysfs.
Since it is an eFuse hardware device, set its type to OTP.
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240705074852.423202-7-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The Rockchip OTP is obviously an OTP memory, so document this fact.
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240705074852.423202-6-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The Rockchip OTP describes its layout via devicetree subnodes,
so set the appropriate property.
Fixes: 2cc3b37f5b6d ("nvmem: add explicit config option to read old syntax fixed OF cells")
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240705074852.423202-5-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use __free for device_node values, and thus drop calls to
of_node_put.
The goal is to reduce memory management issues by using this
scope-based of_node_put() cleanup to simplify function exit
handling. When using __free a resource is allocated within a
block, it is automatically freed at the end of the block.
Suggested-by: Julia Lawall <julia.lawall@inria.fr>
Signed-off-by: MarileneGarcia <marilene.agarcia@gmail.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240705074852.423202-4-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add compatible for MT7981 SoC.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240705074852.423202-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/nvmem/nvmem-apple-efuses.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/nvmem/nvmem_brcm_nvram.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/nvmem/nvmem_u-boot-env.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240705074852.423202-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Request a PPI for each vCPU during probe which will be used by the host
to communicate a stall detected event on the vCPU. When the host raises
this interrupt from the virtual machine monitor, the guest is expected to
handle the interrupt and panic.
Signed-off-by: Sebastian Ene <sebastianene@google.com>
Link: https://lore.kernel.org/r/20240703153732.3214238-3-sebastianene@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The vcpu stall detector allows the host to monitor the availability of a
guest VM. Introduce a PPI interrupt which can be injected from the host
into the virtual gic to let the guest reboot itself.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Sebastian Ene <sebastianene@google.com>
Link: https://lore.kernel.org/r/20240703153732.3214238-2-sebastianene@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The KEBA CP500 system FPGA is a PCIe device, which consists of multiple
IP cores. Every IP core has its own auxiliary driver. The cp500 driver
registers an auxiliary device for each device and the corresponding
drivers are loaded by the Linux driver infrastructure.
Currently 3 variants of this device exists. Every variant has its own
PCI device ID, which is used to determine the list of available IP
cores. In this first version only the auxiliary device for the I2C
controller is registered.
Besides the auxiliary device registration some other basic functions of
the FPGA are implemented; e.g, FPGA version sysfs file, keep FPGA
configuration on reset sysfs file, error message for errors on the
internal AXI bus of the FPGA.
Signed-off-by: Gerhard Engleder <eg@keba.com>
Link: https://lore.kernel.org/r/20240630194740.7137-2-gerhard@engleder-embedded.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
DDR4 DIMMS implementing SPD Annex L, Revision 1 do not implement SPD byte
14 (Module Temperature Sensor); this byte was only added in revision 2 of
the standard. This only applies to DDR4, not DDR4E or LPDDR4, since those
DDR types were only introduced in revision 3 of the standard.
Use this information to instantiate the jc42 device if the module is a DDR4
following SPD revision 1.0 and a device is detected at the expected thermal
sensor address, even if the Module Temperature Sensor byte suggests that
the thermal sensor is not supported.
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240629173716.20389-2-linux@roeck-us.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Instantiating a device by calling i2c_new_client_device() assumes that the
device is not already instantiated. If that is not the case, it will return
an error and generate a misleading kernel log message.
i2c i2c-0: Failed to register i2c client jc42 at 0x18 (-16)
This can be reproduced by unloading the ee1004 driver and loading it again.
Avoid this by calling i2c_new_scanned_device() instead, which returns
silently if a device is already instantiated or does not exist.
Fixes: 393bd1000f81 ("eeprom: ee1004: add support for temperature sensor")
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240629173716.20389-1-linux@roeck-us.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently the driver does not register a nvmem provider, which means
that userspace programs cannot access the ee1004 EEPROM through the
standard nvmem sysfs API.
Fix this by replacing the custom sysfs attribute with a standard nvmem
interface, which also takes care of backwards compatibility.
Tested on a Dell Inspiron 3505.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20240625063459.429953-2-W_Armin@gmx.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use devm_add_action_or_reset() to clean up the bus data at
driver removal or when an error occurs during probe.
This will allow us to use other devres-based APIs later.
Tested on a Dell Inspiron 3505.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20240625063459.429953-1-W_Armin@gmx.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
IIO: 2nd set of new device support, features and cleanup for 6.11
The big one here is we finally have Paul Cercueil's (and others)
DMA buffer support for IIO devices enabling high speed zero
copy transfer of data to and from sensors supported by IIO (and for
example USB). This should aid with upstream support of a range of
higher performance ADCs and DACs.
Two merges from other trees
- spi/spi_devm_optimize used for simplification in ad7944.
- dmaengine/topic_dma_vec to enable the DMABUF series.
One feature with impact outside IIO.
- Richer set of dev_err_probe() like helpers to cover ERR_PTR() cases.
New device support
==================
adi,ad7173
- Add support for AD4111, AD4112, AD4114, AD4115 and ADC4116 pseudo
differential ADCs. Major driver rework was needed to enabled these.
adi,ad7944
- Use devm_spi_optimize_message() to avoid a local devm cleanup
callback. This is the example case from the patch set, others will
follow.
mediatek,mt6359-auxadc
- New driver for this ADC IP found in MT6357, MT6358 and MT6359 PMICs.
st,accel
- Add support for the LIS2DS12 accelerometer
ti,ads1119
- New driver for this 16 bit 2-differential or 4-single ended channel
ADC.
Features
========
dt-bindings
- Introduce new common-mode-channel property to help handle pseudo
differential ADCs where we have something that looks like one side
of differential input, but which is only suited for use with a
slow moving reference.
adi,adf4350
- Support use as a clock provider.
iio-hmwon
- Support reading of labels from IIO devices by their consumers and
use this in the hwmon bridge.
Cleanup and minor fixes
=======================
Treewide
- Use regmap_clear_bits() / regmap_set_bits() to simplify open coded
equivalents.
- Use devm_regulator_get_enable_read_voltage() to replace equivalent
opencoded boilerplate. In some cases enabled complete conversion to
devm handling and removal of explicit remove() callbacks.
- Introduce dev_err_ptr_probe() and other variants and make use of
of them in a couple of examples driver cleanups. Will find use in
many more drivers soon.
adi,ad7192
- Introduce local struct device *dev and use dev_err_probe() to give
more readable code.
adi,adi-axi-adc/dac
- Improved consistency of messages using dev_err_probe()
adi,adis
- Split the trigger handling into cases that needed paging and those that
don't resulting in more readable code.
- Use cleanup.h to simplify error paths via scoped cleanup.
- Add adis specific lock helpers and make use of them in a number of drivers.
adi,ad7192
- Update maintainer (Alisa-Dariana Roman)
adi,ad7606
- dt-binding cleanup.
avago,apds9306
- Add a maintainer entry (Subhajit Ghosh)
linear,ltc2309
- Fix a wrong endian type.
st,stm32-dfsdm
- Fix a missing port property in the dt-binding.
st,sensors
- Relax whoami match failure to a warning print rather than probe failure.
This enables fallback compatibles to existing parts from those that don't
necessarily even exit yet.
* tag 'iio-for-6.11b' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (112 commits)
iio: adc: ad7173: Fix uninitialized symbol is_current_chan
iio: adc: Add support for MediaTek MT6357/8/9 Auxiliary ADC
math.h: Add unsigned 8 bits fractional numbers type
dt-bindings: iio: adc: Add MediaTek MT6359 PMIC AUXADC
iio: common: scmi_iio: convert to dev_err_probe()
iio: backend: make use of dev_err_cast_probe()
iio: temperature: ltc2983: convert to dev_err_probe()
dev_printk: add new dev_err_probe() helpers
iio: xilinx-ams: Add labels
iio: adc: ad7944: use devm_spi_optimize_message()
Documentation: iio: Document high-speed DMABUF based API
iio: buffer-dmaengine: Support new DMABUF based userspace API
iio: buffer-dma: Enable support for DMABUFs
iio: core: Add new DMABUF interface infrastructure
MAINTAINERS: Update AD7192 driver maintainer
iio: adc: ad7192: use devm_regulator_get_enable_read_voltage
iio: st_sensors: relax WhoAmI check in st_sensors_verify_id()
MAINTAINERS: Add AVAGO APDS9306
dt-bindings: iio: adc: adi,ad7606: comment and sort the compatible names
dt-bindings: iio: adc: adi,ad7606: add missing datasheet link
...
|
|
'devmodel' hasn't actually been used since:
'commit 3275158fa52a ("parport: remove use of devmodel")'
and everyone now has it set to true and has been fixed up; remove
the flag.
(There are still comments all over about it)
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Link: https://lore.kernel.org/r/20240502154823.67235-4-linux@treblig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The attach function pointers haven't actually been called since:
'commit 3275158fa52a ("parport: remove use of devmodel")'
topped adding entries to the drivers list.
If you're converting a driver, look at the 'match_port' function
pointer instead.
(There are lots of comment references to 'attach' all over, but they
probably need some deeper understanding to check the semantics
to see if they can be replaced by match_port).
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Link: https://lore.kernel.org/r/20240502154823.67235-3-linux@treblig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The list has been empty since:
'commit 3275158fa52a ("parport: remove use of devmodel")'
This also means we can remove the 'list_head' from
struct parport_driver.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Link: https://lore.kernel.org/r/20240502154823.67235-2-linux@treblig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
'mcb_parse_priv' has been unused since the initial
commit 3764e82e5150 ("drivers: Introduce MEN Chameleon Bus").
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Johannes Thumshirn <jth@kernel.org>
Link: https://lore.kernel.org/r/20240624090104.12871-2-jth@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
These drivers don't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.
This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.
While add it, also remove commas after the sentinel entries.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20240624125101.1242750-2-u.kleine-koenig@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
With ARCH=powerpc, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/char/bsr.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240615-md-powerpc-drivers-char-v1-1-bff22fd778a4@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
With arch=x86, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/platform/goldfish/goldfish_pipe.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240615-goldfish_pipe-md-v2-1-b4323a969594@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
With ARCH=x86, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/dca/dca.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240615-dca-md-v2-1-c4062275a3f1@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/greybus/greybus.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/greybus/gb-es2.o
Add all missing invocations of the MODULE_DESCRIPTION() macro.
Acked-by: Alex Elder <elder@kernel.org>
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240626-md-drivers-greybus-v2-1-d520ffb9a489@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hwtracing/intel_th/intel_th_msu_sink.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240530-md-intel_th_msu_sink-v1-1-ae796336e7b9@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
With ARCH=m68k, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/char/dsp56k.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20240617-md-m68k-drivers-char-dsp56k-v1-1-56e435ffa664@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
With ARCH=m68k, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/char/dtlk.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240617-md-m68k-drivers-char-dtlk-v1-1-a53a237f1f06@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
wait_for_completion_interruptible_timeout()
There is a confusing pattern in the kernel to use a variable named 'timeout' to
store the result of wait_for_completion_interruptible_timeout() causing patterns like:
timeout = wait_for_completion_interruptible_timeout(...)
if (!timeout) return -ETIMEDOUT;
with all kinds of permutations. Use 'time_left' as a variable to make the code
self explaining.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20240604212240.4529-5-wsa+renesas@sang-engineering.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There is a confusing pattern in the kernel to use a variable named 'timeout' to
store the result of wait_for_completion_timeout() causing patterns like:
timeout = wait_for_completion_timeout(...)
if (!timeout) return -ETIMEDOUT;
with all kinds of permutations. Use 'time_left' as a variable to make the code
self explaining.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20240604212240.4529-4-wsa+renesas@sang-engineering.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
wait_event_interruptible_timeout()
There is a confusing pattern in the kernel to use a variable named 'timeout' to
store the result of wait_event_interruptible_timeout() causing patterns like:
timeout = wait_event_interruptible_timeout(...)
if (!timeout) return -ETIMEDOUT;
with all kinds of permutations. Use 'time_left' as a variable to make the code
self explaining.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20240604212240.4529-3-wsa+renesas@sang-engineering.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There is a confusing pattern in the kernel to use a variable named 'timeout' to
store the result of wait_event_interruptible_timeout() causing patterns like:
timeout = wait_event_interruptible_timeout(...)
if (!timeout) return -ETIMEDOUT;
with all kinds of permutations. Use 'time_left' as a variable to make the code
self explaining.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20240604212240.4529-2-wsa+renesas@sang-engineering.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In binder_alloc, there is a frequent need for order3 memory allocation,
especially on small-memory mobile devices, which can lead to OOM and
cause foreground applications to be killed, resulting in flashbacks.
We use kvcalloc to allocate memory, which can reduce system OOM
occurrences, as well as decrease the time and probability of failure for
order3 memory allocations. Additionally, It has little impact on the
throughput of the binder. (as verified by Google's binder_benchmark
testing tool).
We have conducted multiple tests on an 8GB memory phone, kvcalloc has
little performance degradation and resolves frequent OOM issues, Below
is a partial excerpt of the test data.
throughput(TH_PUT) = (size * Iterations)/Time
kcalloc->kvcalloc:
Sample with kcalloc():
adb shell stop/ kcalloc /8+256G
---------------------------------------------------------------------
Benchmark Time CPU Iterations TH-PUT TH-PUTCPU
(ns) (ns) (GB/s) (GB/s)
---------------------------------------------------------------------
BM_sendVec_binder4 39126 18550 38894 3.976282 8.38684
BM_sendVec_binder8 38924 18542 37786 7.766108 16.3028
BM_sendVec_binder16 38328 18228 36700 15.32039 32.2141
BM_sendVec_binder32 38154 18215 38240 32.07213 67.1798
BM_sendVec_binder64 39093 18809 36142 59.16885 122.977
BM_sendVec_binder128 40169 19188 36461 116.1843 243.2253
BM_sendVec_binder256 40695 19559 35951 226.1569 470.5484
BM_sendVec_binder512 41446 20211 34259 423.2159 867.8743
BM_sendVec_binder1024 44040 22939 28904 672.0639 1290.278
BM_sendVec_binder2048 47817 25821 26595 1139.063 2109.393
BM_sendVec_binder4096 54749 30905 22742 1701.423 3014.115
BM_sendVec_binder8192 68316 42017 16684 2000.634 3252.858
BM_sendVec_binder16384 95435 64081 10961 1881.752 2802.469
BM_sendVec_binder32768 148232 107504 6510 1439.093 1984.295
BM_sendVec_binder65536 326499 229874 3178 637.8991 906.0329
NORAML TEST SUM 10355.79 17188.15
stressapptest eat 2G SUM 10088.39 16625.97
Sample with kvcalloc():
adb shell stop/ kvcalloc /8+256G
----------------------------------------------------------------------
Benchmark Time CPU Iterations TH-PUT TH-PUTCPU
(ns) (ns) (GB/s) (GB/s)
----------------------------------------------------------------------
BM_sendVec_binder4 39673 18832 36598 3.689965 7.773577
BM_sendVec_binder8 39869 18969 37188 7.462038 15.68369
BM_sendVec_binder16 39774 18896 36627 14.73405 31.01355
BM_sendVec_binder32 40225 19125 36995 29.43045 61.90013
BM_sendVec_binder64 40549 19529 35148 55.47544 115.1862
BM_sendVec_binder128 41580 19892 35384 108.9262 227.6871
BM_sendVec_binder256 41584 20059 34060 209.6806 434.6857
BM_sendVec_binder512 42829 20899 32493 388.4381 796.0389
BM_sendVec_binder1024 45037 23360 29251 665.0759 1282.236
BM_sendVec_binder2048 47853 25761 27091 1159.433 2153.735
BM_sendVec_binder4096 55574 31745 22405 1651.328 2890.877
BM_sendVec_binder8192 70706 43693 16400 1900.105 3074.836
BM_sendVec_binder16384 96161 64362 10793 1838.921 2747.468
BM_sendVec_binder32768 147875 107292 6296 1395.147 1922.858
BM_sendVec_binder65536 330324 232296 3053 605.7126 861.3209
NORAML TEST SUM 10033.56 16623.35
stressapptest eat 2G SUM 9958.43 16497.55
Signed-off-by: Lei Liu <liulei.rjpt@vivo.com>
Acked-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20240619113841.3362-1-liulei.rjpt@vivo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When creating new binder references, the driver assigns a descriptor id
that is shared with userspace. Regrettably, the driver needs to keep the
descriptors small enough to accommodate userspace potentially using them
as Vector indexes. Currently, the driver performs a linear search on the
rb-tree of references to find the smallest available descriptor id. This
approach, however, scales poorly as the number of references grows.
This patch introduces the usage of bitmaps to boost the performance of
descriptor assignments. This optimization results in notable performance
gains, particularly in processes with a large number of references. The
following benchmark with 100,000 references showcases the difference in
latency between the dbitmap implementation and the legacy approach:
[ 587.145098] get_ref_desc_olocked: 15us (dbitmap on)
[ 602.788623] get_ref_desc_olocked: 47343us (dbitmap off)
Note the bitmap size is dynamically adjusted in line with the number of
references, ensuring efficient memory usage. In cases where growing the
bitmap is not possible, the driver falls back to the slow legacy method.
A previous attempt to solve this issue was proposed in [1]. However,
such method involved adding new ioctls which isn't great, plus older
userspace code would not have benefited from the optimizations either.
Link: https://lore.kernel.org/all/20240417191418.1341988-1-cmllamas@google.com/ [1]
Cc: Tim Murray <timmurray@google.com>
Cc: Arve Hjønnevåg <arve@android.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Martijn Coenen <maco@android.com>
Cc: Todd Kjos <tkjos@android.com>
Cc: John Stultz <jstultz@google.com>
Cc: Steven Moreland <smoreland@google.com>
Suggested-by: Nick Chen <chenjia3@oppo.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20240612042535.1556708-1-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/coresight/linux into char-misc-next
Suzuki writes:
coresight: Updates for v6.11
Coresight/hwtracing subsystem updates targeting v6.11 includes a few minor
fixes and cleanups
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
* tag 'coresight-next-v6.11' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/coresight/linux:
hwtracing: use for_each_endpoint_of_node()
coresight: constify the struct device_type usage
coresight: tmc: Remove duplicated include in coresight-tmc-core.c
coresight: Fix ref leak when of_coresight_parse_endpoint() fails
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wbg/counter into char-misc-next
William writes:
Counter updates for 6.11
Primarily consists of cleanups and updates for ti-eqep; ti-eqep now
supports over/underflow events and can be build for K3 devices. In
addition, ftm-quaddec is updated to add a missing MODULE_DESCRIPTION()
macro.
* tag 'counter-updates-for-6.11' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wbg/counter:
counter: ti-eqep: Allow eQEP driver to be built for K3 devices
counter/ti-eqep: Add new ti-am62-eqep compatible
dt-bindings: counter: Add new ti,am62-eqep compatible
counter: ti-eqep: remove counter_priv() wrapper
counter: ti-eqep: remove unused struct member
counter: ti-eqep: implement over/underflow events
counter: ftm-quaddec: add missing MODULE_DESCRIPTION() macro
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/krzk/linux-w1 into char-misc-next
Krzysztof writes:
1-Wire bus drivers for v6.11
Just two cleanups for W1 core code.
* tag 'w1-drv-6.11' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/krzk/linux-w1:
w1: Drop allocation error message
w1: Add missing newline and fix typos in w1_bus_master comment
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga into char-misc-next
Xu writes:
FPGA Manager changes for 6.11-rc1
FPGA unit test:
- Macro's change re-enables FPGA KUnit test suites been configured as
loadable module.
Altera:
- David's change removes unused structure definition.
All patches have been reviewed on the mailing list, and have been in the
last linux-next releases (as part of our for-next branch).
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
* tag 'fpga-for-6.11-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga:
fpga: altera-fpga2sdram: remove unused struct 'prop_map'
Revert "fpga: disable KUnit test suites when module support is enabled"
|
|
Move the definition down and make it a boolean that is initialized
to false.
Fixes: 13d12e3ad12d ("iio: adc: ad7173: Add support for AD411x devices")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202406232046.DKfBJq6o-lkp@intel.com/
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add a driver to support reading the Auxiliary ADC IP found in the
MediaTek MT6357, MT6358 and MT6359 Power Management ICs, featuring
a different register layout, configuration reset and ADC reading
sequence from the other already supported MediaTek SoC or PMIC
(aux)ADC HW.
This driver provides multiple ADC channels for system monitoring,
such as battery voltage, PMIC temperature, PMIC-internal voltage
regulators temperature, and others.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://patch.msgid.link/20240604123008.327424-5-angelogioacchino.delregno@collabora.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Some users may be requiring only rather small numbers as both
numerator and denominator: add signed and unsigned 8 bits
structs {s8,u8}_fract.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://patch.msgid.link/20240604123008.327424-4-angelogioacchino.delregno@collabora.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
